diff --git a/HDD/Apple/HDD HTS5450/HDD HTS545050A7E362/BC271AA6DC3A b/HDD/Apple/HDD HTS5450/HDD HTS545050A7E362/BC271AA6DC3A new file mode 100644 index 000000000..8b3e5d158 --- /dev/null +++ b/HDD/Apple/HDD HTS5450/HDD HTS545050A7E362/BC271AA6DC3A @@ -0,0 +1,100 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar Z5K500 +Device Model: APPLE HDD HTS545050A7E362 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: GG2AB990 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Oct 19 22:46:19 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 111) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 + 3 Spin_Up_Time 0x0007 214 214 033 Pre-fail Always - 1 + 4 Start_Stop_Count 0x0012 073 073 000 Old_age Always - 43396 + 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0012 085 085 000 Old_age Always - 6681 + 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 4601 +160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 13 +193 Load_Cycle_Count 0x0012 061 061 000 Old_age Always - 395814 +194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 14/47) +195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 +223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 +254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 2 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/ExcelStor/J/J8160/DDA3A68F7B8B b/HDD/ExcelStor/J/J8160/DDA3A68F7B8B new file mode 100644 index 000000000..5f760faec --- /dev/null +++ b/HDD/ExcelStor/J/J8160/DDA3A68F7B8B @@ -0,0 +1,142 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ExcelStor Technology J8160 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: P22OA60A +User Capacity: 164,696,555,520 bytes [164 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Fri Sep 11 17:19:30 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2865) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 125 125 024 - 160 (Average 160) + 4 Start_Stop_Count -O--C- 099 099 000 - 6479 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 020 - 0 + 9 Power_On_Hours -O--C- 097 097 000 - 25232 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 4964 +192 Power-Off_Retract_Count -O--CK 095 095 000 - 7000 +193 Load_Cycle_Count -O--C- 095 095 000 - 7000 +194 Temperature_Celsius -O---- 206 206 000 - 29 (Min/Max 10/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 490 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: --/30 Celsius +Lifetime Min/Max Temperature: --/40 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (91) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/HDD/ExcelStor/J/J8160/E19161617BF3 b/HDD/ExcelStor/J/J8160/E19161617BF3 new file mode 100644 index 000000000..7ee8a1139 --- /dev/null +++ b/HDD/ExcelStor/J/J8160/E19161617BF3 @@ -0,0 +1,228 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ExcelStor Technology J8160 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: P22OA60A +User Capacity: 164,696,555,520 bytes [164 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Fri Sep 11 17:19:29 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2865) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 123 123 024 - 162 (Average 162) + 4 Start_Stop_Count -O--C- 099 099 000 - 5153 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 020 - 0 + 9 Power_On_Hours -O--C- 097 097 000 - 23520 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 5042 +192 Power-Off_Retract_Count -O--CK 096 096 000 - 5691 +193 Load_Cycle_Count -O--C- 096 096 000 - 5691 +194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 11/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 67 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 5 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 5 [0] occurred at disk power-on lifetime: 3752 hours (156 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 09 09 66 ff e9 00 Error: ICRC, ABRT at LBA = 0x090966ff = 151611135 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 00 09 09 66 00 e0 00 01:56:31.100 READ DMA EXT + 35 00 00 01 00 00 00 05 e7 fc 00 e0 00 01:56:31.100 WRITE DMA EXT + 25 00 00 01 00 00 00 11 7d ea 00 e0 00 01:56:31.100 READ DMA EXT + 35 00 00 01 00 00 00 0d a5 7a 00 e0 00 01:56:31.100 WRITE DMA EXT + 25 00 00 01 00 00 00 02 70 c6 00 e0 00 01:56:31.100 READ DMA EXT + +Error 4 [3] occurred at disk power-on lifetime: 3752 hours (156 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 00 9a d2 ff e0 00 Error: ICRC, ABRT at LBA = 0x009ad2ff = 10146559 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 00 00 9a d2 00 e0 00 01:56:12.000 READ DMA EXT + 35 00 00 01 00 00 00 0d 9b 62 00 e0 00 01:56:12.000 WRITE DMA EXT + 25 00 00 01 00 00 00 10 7e 4e 00 e0 00 01:56:12.000 READ DMA EXT + 35 00 00 01 00 00 00 0b 8e a8 00 e0 00 01:56:11.900 WRITE DMA EXT + 25 00 00 01 00 00 00 01 4d 18 00 e0 00 01:56:11.900 READ DMA EXT + +Error 3 [2] occurred at disk power-on lifetime: 3752 hours (156 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 02 2b 4e ff e2 00 Error: ICRC, ABRT at LBA = 0x022b4eff = 36392703 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 00 02 2b 4e 00 e0 00 01:54:05.300 READ DMA EXT + 35 00 00 01 00 00 00 02 95 24 00 e0 00 01:54:05.300 WRITE DMA EXT + 25 00 00 01 00 00 00 03 88 48 00 e0 00 01:54:05.300 READ DMA EXT + 35 00 00 01 00 00 00 07 ea 78 00 e0 00 01:54:05.300 WRITE DMA EXT + 25 00 00 01 00 00 00 04 b4 92 00 e0 00 01:54:05.300 READ DMA EXT + +Error 2 [1] occurred at disk power-on lifetime: 3752 hours (156 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 07 a3 d0 ff e7 00 Error: ICRC, ABRT at LBA = 0x07a3d0ff = 128176383 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 01 00 00 00 07 a3 d0 00 e0 00 01:53:33.400 WRITE DMA EXT + 25 00 00 01 00 00 00 02 b5 cc 00 e0 00 01:53:33.300 READ DMA EXT + 35 00 00 01 00 00 00 05 f6 16 00 e0 00 01:53:33.300 WRITE DMA EXT + 25 00 00 01 00 00 00 05 ec 70 00 e0 00 01:53:33.300 READ DMA EXT + 35 00 00 01 00 00 00 09 f1 da 00 e0 00 01:53:33.300 WRITE DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 3561 - +# 2 Short offline Completed without error 00% 3561 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: --/33 Celsius +Lifetime Min/Max Temperature: --/42 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (122) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/HDD/ExcelStor/J/J8160S/101B8104D513 b/HDD/ExcelStor/J/J8160S/101B8104D513 new file mode 100644 index 000000000..3dcc8cd85 --- /dev/null +++ b/HDD/ExcelStor/J/J8160S/101B8104D513 @@ -0,0 +1,152 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ExcelStor Technology J8160S +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: P22OABEA +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Fri Sep 11 17:19:28 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2865) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 099 099 016 - 65538 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 120 120 024 - 165 (Average 166) + 4 Start_Stop_Count -O--C- 099 099 000 - 7526 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 1 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 020 - 0 + 9 Power_On_Hours -O--C- 097 097 000 - 24071 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 4632 +192 Power-Off_Retract_Count -O--CK 094 094 000 - 8040 +193 Load_Cycle_Count -O--C- 094 094 000 - 8040 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 11/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 1 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: --/34 Celsius +Lifetime Min/Max Temperature: --/46 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (93) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/ExcelStor/J/J8160S/CB8310E8C233 b/HDD/ExcelStor/J/J8160S/CB8310E8C233 new file mode 100644 index 000000000..b3f96d159 --- /dev/null +++ b/HDD/ExcelStor/J/J8160S/CB8310E8C233 @@ -0,0 +1,234 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ExcelStor Technology J8160S +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: P22OABEA +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Fri Sep 11 17:19:28 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2865) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 099 099 016 - 131073 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 119 119 024 - 167 (Average 169) + 4 Start_Stop_Count -O--C- 083 083 000 - 69172 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 12 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 020 - 0 + 9 Power_On_Hours -O--C- 097 097 000 - 24079 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 4645 +192 Power-Off_Retract_Count -O--CK 042 042 000 - 69731 +193 Load_Cycle_Count -O--C- 042 042 000 - 69731 +194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 12/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 12 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1089 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1089 [0] occurred at disk power-on lifetime: 18839 hours (784 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 7a 00 00 02 9e 75 7d e2 00 Error: UNC 122 sectors at LBA = 0x029e757d = 43939197 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 00 02 9e 75 77 e0 00 01:35:18.100 READ DMA EXT + 35 00 00 00 08 00 00 00 5e 00 3f e0 00 01:35:18.100 WRITE DMA EXT + 35 00 00 00 80 00 00 02 3d 4c 6f e0 00 01:35:18.100 WRITE DMA EXT + 25 00 00 00 80 00 00 02 9e 74 f7 e0 00 01:35:18.100 READ DMA EXT + 35 00 00 00 08 00 00 00 5e 00 47 e0 00 01:35:18.100 WRITE DMA EXT + +Error 1088 [3] occurred at disk power-on lifetime: 18839 hours (784 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 7a 00 00 02 9e 75 7d e2 00 Error: UNC 122 sectors at LBA = 0x029e757d = 43939197 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 03 00 00 80 00 00 02 9e 75 77 e0 00 01:10:39.300 READ DMA EXT + 25 03 00 00 40 00 00 00 d3 a6 d7 e0 00 01:10:39.300 READ DMA EXT + 35 03 00 00 08 00 00 00 5e 00 3f e0 00 01:10:39.300 WRITE DMA EXT + 35 03 00 00 08 00 00 00 00 71 97 e0 00 01:10:39.300 WRITE DMA EXT + ec 03 00 00 00 b3 ff 9e 00 00 00 a0 00 01:10:39.300 IDENTIFY DEVICE + +Error 1087 [2] occurred at disk power-on lifetime: 18839 hours (784 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 59 00 7a 00 00 02 9e 75 7d e2 00 Error: UNC at LBA = 0x029e757d = 43939197 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 29 03 03 00 80 00 00 02 9e 75 77 e0 00 01:10:34.400 READ MULTIPLE EXT + 25 03 03 00 40 00 00 00 d3 a7 17 e0 00 01:10:34.400 READ DMA EXT + 35 03 03 00 08 00 00 00 5e 00 47 e0 00 01:10:34.400 WRITE DMA EXT + 35 03 03 00 07 00 00 00 12 94 4f e0 00 01:10:34.400 WRITE DMA EXT + 35 03 03 00 01 00 00 00 0c e0 8f e0 00 01:10:34.400 WRITE DMA EXT + +Error 1086 [1] occurred at disk power-on lifetime: 18839 hours (784 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 00 00 00 01 00 00 Error: UNC 1 sectors at LBA = 0x00000001 = 1 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 00 02 9e 75 77 e0 04 01:10:33.400 READ DMA EXT + 25 00 00 00 80 00 00 02 9e 75 77 e0 00 01:10:24.100 READ DMA EXT + 35 00 00 00 08 00 00 00 5e c2 5f e0 00 01:10:24.100 WRITE DMA EXT + 25 00 00 00 40 00 00 02 b3 e9 af e0 00 01:10:24.100 READ DMA EXT + 35 00 00 00 08 00 00 00 5e 00 3f e0 00 01:10:24.100 WRITE DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: --/35 Celsius +Lifetime Min/Max Temperature: --/45 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (38) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Fujitsu/MHS2040/MHS2040AT D/76130F47F4FF b/HDD/Fujitsu/MHS2040/MHS2040AT D/76130F47F4FF new file mode 100644 index 000000000..33420af87 --- /dev/null +++ b/HDD/Fujitsu/MHS2040/MHS2040AT D/76130F47F4FF @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Fujitsu MHS AT +Device Model: FUJITSU MHS2040AT D +Serial Number: -- +Firmware Version: 8004 +User Capacity: 40,007,761,920 bytes [40.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-6 T13/1410D revision 3a +Local Time is: Thu Jul 9 18:25:59 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 64 (unknown/retired), recommended: 0 +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 414) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 55) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 046 - 124800 + 2 Throughput_Performance P-S--- 100 100 030 - 0 + 3 Spin_Up_Time PO---- 097 076 025 - 24832 + 4 Start_Stop_Count -O--CK 034 034 000 - 39599 + 5 Reallocated_Sector_Ct PO--CK 099 099 024 - 26 + 7 Seek_Error_Rate POSR-- 100 081 047 - 3144 + 8 Seek_Time_Performance P-S--- 100 100 019 - 0 + 9 Power_On_Seconds -O--CK 001 001 000 - 32035h+20m+11s + 10 Spin_Retry_Count PO--C- 100 010 020 Past 0 + 12 Power_Cycle_Count -O--CK 001 001 000 - 35055 +192 Emerg_Retract_Cycle_Ct -O--CK 098 098 000 - 399 +193 Load_Cycle_Count -O--CK 001 001 000 - 1480255 +194 Temperature_Celsius -O---K 100 040 000 - 43 (Min/Max 9/67) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 756 +196 Reallocated_Event_Count -O--CK 099 099 000 - 7 +197 Current_Pending_Sector -O--C- 100 090 000 - 0 +198 Offline_Scan_UNC_SectCt ----C- 097 097 000 - 6 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Write_Error_Count POSR-- 100 100 060 - 20484 +203 Run_Out_Cancel -O---- 097 097 000 - 2619843413278 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory not supported + +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x09 SL R/W 1 Selective self-test log +0x80-0x9f SL R/W 16 Host vendor specific log +0xa1-0xa3 SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +ATA Error Count: 1079 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1079 occurred at disk power-on lifetime: 30149 hours (1256 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 59 04 24 0a 66 e0 Error: UNC 4 sectors at LBA = 0x00660a24 = 6687268 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 20 0a 66 e0 00 00:01:08.223 READ DMA + +Error 1078 occurred at disk power-on lifetime: 30149 hours (1256 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 59 04 24 0a 66 e0 Error: UNC 4 sectors at LBA = 0x00660a24 = 6687268 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 20 0a 66 e0 00 00:01:03.137 READ DMA + +Error 1077 occurred at disk power-on lifetime: 14338 hours (597 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 59 2a f8 e7 2d e3 Error: UNC 42 sectors at LBA = 0x032de7f8 = 53340152 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 40 e2 e7 2d e3 00 22d+05:29:07.677 READ DMA + +Error 1076 occurred at disk power-on lifetime: 14338 hours (597 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 01 51 40 e2 1e 2e e3 Error: AMNF 64 sectors at LBA = 0x032e1ee2 = 53354210 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 40 e2 1e 2e e3 00 22d+05:28:58.960 READ DMA + +Error 1075 occurred at disk power-on lifetime: 5660 hours (235 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 59 01 33 24 66 e2 Error: UNC at LBA = 0x02662433 = 40248371 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 20 ff 01 33 24 66 e2 00 01:11:04.895 READ SECTOR(S) + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/HDD/Fujitsu/MHZ2320/MHZ2320BH FFS G1/0503404B582B b/HDD/Fujitsu/MHZ2320/MHZ2320BH FFS G1/0503404B582B new file mode 100644 index 000000000..d3103c65a --- /dev/null +++ b/HDD/Fujitsu/MHZ2320/MHZ2320BH FFS G1/0503404B582B @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Fujitsu MHZ BH +Device Model: FUJITSU MHZ2320BH FFS G1 +Serial Number: -- +LU WWN Device Id: 5 00000e ... +Firmware Version: 00810091 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 3f +SATA Version is: SATA 2.5, 1.5 Gb/s +Local Time is: Sun Aug 2 01:00:05 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1298) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 184) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 046 - 0 + 2 Throughput_Performance P-S--- 100 100 030 - 0 + 3 Spin_Up_Time PO---- 100 100 025 - 0 + 4 Start_Stop_Count -O--CK 099 099 000 - 2466 + 5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 + 7 Seek_Error_Rate POSR-- 100 100 047 - 0 + 8 Seek_Time_Performance P-S--- 100 100 019 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 4878 + 10 Spin_Retry_Count PO--C- 100 100 020 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1579 +160 Unknown_Attribute -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 4295753805 +193 Load_Cycle_Count -O--CK 090 090 000 - 219054 +194 Temperature_Celsius -O---K 100 100 000 - 42 (Min/Max 12/58) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0 +200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 0 +203 Run_Out_Cancel -O---- 100 100 000 - 0 +240 Head_Flying_Hours -OSRCK 200 200 000 - 0 +254 Free_Fall_Sensor -O--CK 100 100 000 - 162 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 51 Comprehensive SMART error log +0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 34/43 Celsius +Lifetime Min/Max Temperature: 12/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (32) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC + diff --git a/HDD/Fujitsu/MJA2160/MJA2160BH G2/86E110EE3F5F b/HDD/Fujitsu/MJA2160/MJA2160BH G2/86E110EE3F5F new file mode 100644 index 000000000..3eddc3ef3 --- /dev/null +++ b/HDD/Fujitsu/MJA2160/MJA2160BH G2/86E110EE3F5F @@ -0,0 +1,182 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE-p11 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Fujitsu MJA BH +Device Model: FUJITSU MJA2160BH G2 +Serial Number: -- +LU WWN Device Id: 5 00000e ... +Firmware Version: 8919 +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 3f +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Aug 20 13:43:15 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 508) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 72) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 046 - 63085 + 2 Throughput_Performance P-S--K 253 253 030 - 24182784 + 3 Spin_Up_Time PO---K 100 100 025 - 0 + 4 Start_Stop_Count -O--CK 099 099 000 - 3639 + 5 Reallocated_Sector_Ct PO--CK 253 253 024 - 0 + 7 Seek_Error_Rate POSR-K 100 100 047 - 2514 + 8 Seek_Time_Performance P-S--K 253 253 019 - 0 + 9 Power_On_Hours -O--CK 070 070 000 - 15215 + 10 Spin_Retry_Count PO--CK 253 253 020 - 0 + 11 Calibration_Retry_Count -O--CK 253 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3624 +180 Unknown_HDD_Attribute POSR-K 100 100 098 - 0 +182 Unknown_HDD_Attribute -O--CK 100 100 000 - 0 +183 Runtime_Bad_Block -O--CK 253 253 000 - 0 +184 End-to-End_Error PO--CK 253 253 097 - 0 +185 Unknown_Attribute ----CK 253 253 000 - 0 +186 Unknown_Attribute -O--CK 253 253 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 069 057 045 - 31 (Min/Max 22/33) +191 G-Sense_Error_Rate -O--CK 253 099 000 - 16580614 +192 Power-Off_Retract_Count -O--CK 094 094 000 - 105514570 +193 Load_Cycle_Count -O--CK 081 081 000 - 391597 +195 Hardware_ECC_Recovered -O-RCK 253 253 000 - 99 +196 Reallocated_Event_Count -O--CK 253 253 000 - 0 +197 Current_Pending_Sector -O--CK 253 253 000 - 0 +198 Offline_Uncorrectable ----CK 253 253 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 253 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 51 Comprehensive SMART error log +0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2122 - +# 2 Extended captive Interrupted (host reset) 90% 1955 - +# 3 Extended captive Interrupted (host reset) 90% 1955 - +# 4 Extended captive Completed without error 00% 1955 - +# 5 Short captive Completed without error 00% 1954 - +# 6 Extended captive Completed without error 00% 85 - +# 7 Short captive Completed without error 00% 84 - +# 8 Extended captive Interrupted (host reset) 60% 75 - +# 9 Short captive Completed without error 00% 74 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 24/35 Celsius +Lifetime Min/Max Temperature: 7/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (445) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC + diff --git a/HDD/HGST/HDN7240/HDN724030ALE640/400DA7C33FD7 b/HDD/HGST/HDN7240/HDN724030ALE640/400DA7C33FD7 new file mode 100644 index 000000000..369de9162 --- /dev/null +++ b/HDD/HGST/HDN7240/HDN724030ALE640/400DA7C33FD7 @@ -0,0 +1,289 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN724030ALE640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJ8OA5E0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:04 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 455) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 82 + 3 Spin_Up_Time POS--- 130 130 024 - 493 (Average 465) + 4 Start_Stop_Count -O--C- 097 097 000 - 12585 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 095 095 000 - 35214 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 950 +192 Power-Off_Retract_Count -O--CK 089 089 000 - 13727 +193 Load_Cycle_Count -O--C- 089 089 000 - 13731 +194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 9/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 63 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 63 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 63 [2] occurred at disk power-on lifetime: 1348 hours (56 days + 4 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:58.159 IDENTIFY DEVICE + ec 00 00 00 01 00 00 00 00 00 01 00 04 00:00:57.987 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 a0 ff 00:00:57.665 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:52.685 IDENTIFY DEVICE + 25 00 00 00 01 00 00 00 00 00 01 00 04 00:00:52.513 READ DMA EXT + +Error 62 [1] occurred at disk power-on lifetime: 1348 hours (56 days + 4 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:52.685 IDENTIFY DEVICE + 25 00 00 00 01 00 00 00 00 00 01 00 04 00:00:52.513 READ DMA EXT + 25 00 00 01 01 00 00 00 00 08 ff 00 ff 00:00:52.195 READ DMA EXT + 25 00 00 01 80 00 00 00 00 08 80 e0 08 00:00:52.181 READ DMA EXT + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:52.181 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 61 [0] occurred at disk power-on lifetime: 1348 hours (56 days + 4 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 01 01 00 00 00 00 08 ff 00 00 Error: ICRC, ABRT 257 sectors at LBA = 0x000008ff = 2303 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 80 00 00 00 00 08 80 e0 08 00:00:52.181 READ DMA EXT + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:52.181 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:52.180 IDENTIFY DEVICE + ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:52.180 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:52.180 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 60 [3] occurred at disk power-on lifetime: 1348 hours (56 days + 4 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 a1 00 00 00 00 09 5f 00 00 Error: ICRC, ABRT 161 sectors at LBA = 0x0000095f = 2399 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 80 00 00 00 00 08 80 e0 08 00:00:51.675 READ DMA EXT + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:51.675 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:51.674 IDENTIFY DEVICE + ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:51.674 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:51.674 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1471 - +# 2 Short offline Completed without error 00% 1462 - +# 3 Extended offline Completed without error 00% 1357 - +# 4 Extended offline Interrupted (host reset) 70% 474 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 21/45 Celsius +Lifetime Min/Max Temperature: 9/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (60) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 950 --- Lifetime Power-On Resets +0x01 0x018 6 89151391606 --- Logical Sectors Written +0x01 0x020 6 1803722189 --- Number of Write Commands +0x01 0x028 6 256119970969 --- Logical Sectors Read +0x01 0x030 6 1872212081 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 35195 --- Spindle Motor Power-on Hours +0x03 0x010 4 35198 --- Head Flying Hours +0x03 0x018 4 13731 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 7 --- Read Recovery Attempts +0x03 0x030 4 93 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 44 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 N-- Average Short Term Temperature +0x05 0x018 1 40 N-- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 47 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 43 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8362 --- Number of Hardware Resets +0x06 0x010 4 1295 --- Number of ASR Events +0x06 0x018 4 63 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 24 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HDN7240/HDN724030ALE640/6200321B4593 b/HDD/HGST/HDN7240/HDN724030ALE640/6200321B4593 new file mode 100644 index 000000000..71d39d11f --- /dev/null +++ b/HDD/HGST/HDN7240/HDN724030ALE640/6200321B4593 @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN724030ALE640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJ8OA5E0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:07 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 440) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 80 + 3 Spin_Up_Time POS--- 130 130 024 - 487 (Average 472) + 4 Start_Stop_Count -O--C- 100 100 000 - 230 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 095 095 000 - 38851 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 227 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1011 +193 Load_Cycle_Count -O--C- 100 100 000 - 1011 +194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 9/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1512 - +# 2 Extended offline Interrupted (host reset) 70% 473 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 38/52 Celsius +Lifetime Min/Max Temperature: 9/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (61) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 227 --- Lifetime Power-On Resets +0x01 0x018 6 101080635124 --- Logical Sectors Written +0x01 0x020 6 2087856124 --- Number of Write Commands +0x01 0x028 6 276221688891 --- Logical Sectors Read +0x01 0x030 6 2055458553 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 38846 --- Spindle Motor Power-on Hours +0x03 0x010 4 38845 --- Head Flying Hours +0x03 0x018 4 1011 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 42 N-- Average Short Term Temperature +0x05 0x018 1 42 N-- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 54 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 49 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7245 --- Number of Hardware Resets +0x06 0x010 4 1206 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 24 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HDN7240/HDN724040ALE640/1B0EF6ACA29E b/HDD/HGST/HDN7240/HDN724040ALE640/1B0EF6ACA29E new file mode 100644 index 000000000..f75b383c1 --- /dev/null +++ b/HDD/HGST/HDN7240/HDN724040ALE640/1B0EF6ACA29E @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN724040ALE640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5E0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:28 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 565) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 82 + 3 Spin_Up_Time POS--- 138 138 024 - 617 (Average 504) + 4 Start_Stop_Count -O--C- 100 100 000 - 238 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 119 119 020 - 35 + 9 Power_On_Hours -O--C- 095 095 000 - 40448 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 237 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1916 +193 Load_Cycle_Count -O--C- 099 099 000 - 1916 +194 Temperature_Celsius -O---- 125 125 000 - 48 (Min/Max 10/74) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3115 - +# 2 Extended offline Completed without error 00% 3012 - +# 3 Extended offline Completed without error 00% 2697 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 47/62 Celsius +Lifetime Min/Max Temperature: 10/74 Celsius +Under/Over Temperature Limit Count: 0/415 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (5) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 237 --- Lifetime Power-On Resets +0x01 0x018 6 30874896726 --- Logical Sectors Written +0x01 0x020 6 659845532 --- Number of Write Commands +0x01 0x028 6 1195093293196 --- Logical Sectors Read +0x01 0x030 6 13739163367 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 40440 --- Spindle Motor Power-on Hours +0x03 0x010 4 40440 --- Head Flying Hours +0x03 0x018 4 1916 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1463 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 49 --- Current Temperature +0x05 0x010 1 48 N-- Average Short Term Temperature +0x05 0x018 1 51 N-- Average Long Term Temperature +0x05 0x020 1 74 --- Highest Temperature +0x05 0x028 1 10 --- Lowest Temperature +0x05 0x030 1 69 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 62 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 129710 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 18379 --- Number of Hardware Resets +0x06 0x010 4 8834 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/HGST/HDN7240/HDN724040ALE640/20C65A3C45B3 b/HDD/HGST/HDN7240/HDN724040ALE640/20C65A3C45B3 new file mode 100644 index 000000000..85da4120c --- /dev/null +++ b/HDD/HGST/HDN7240/HDN724040ALE640/20C65A3C45B3 @@ -0,0 +1,207 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN724040ALE640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5E0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:22 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 564) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 137 137 054 - 79 + 3 Spin_Up_Time POS--- 136 136 024 - 598 (Average 540) + 4 Start_Stop_Count -O--C- 100 100 000 - 236 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 119 119 020 - 35 + 9 Power_On_Hours -O--C- 095 095 000 - 40250 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 236 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1868 +193 Load_Cycle_Count -O--C- 099 099 000 - 1868 +194 Temperature_Celsius -O---- 122 122 000 - 49 (Min/Max 8/72) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2909 - +# 2 Extended offline Completed without error 00% 2806 - +# 3 Extended offline Completed without error 00% 2491 - +# 4 Extended offline Interrupted (host reset) 70% 1870 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 49 Celsius +Power Cycle Min/Max Temperature: 47/62 Celsius +Lifetime Min/Max Temperature: 8/72 Celsius +Under/Over Temperature Limit Count: 0/491 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (31) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 236 --- Lifetime Power-On Resets +0x01 0x018 6 30847958158 --- Logical Sectors Written +0x01 0x020 6 645880814 --- Number of Write Commands +0x01 0x028 6 1183016706120 --- Logical Sectors Read +0x01 0x030 6 13716847213 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 40242 --- Spindle Motor Power-on Hours +0x03 0x010 4 40242 --- Head Flying Hours +0x03 0x018 4 1868 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 41 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 49 --- Current Temperature +0x05 0x010 1 48 N-- Average Short Term Temperature +0x05 0x018 1 50 N-- Average Long Term Temperature +0x05 0x020 1 72 --- Highest Temperature +0x05 0x028 1 8 --- Lowest Temperature +0x05 0x030 1 66 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 59 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 38160 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 14282 --- Number of Hardware Resets +0x06 0x010 4 8818 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HDN7240/HDN724040ALE640/488C8B9B145E b/HDD/HGST/HDN7240/HDN724040ALE640/488C8B9B145E new file mode 100644 index 000000000..eca2039f9 --- /dev/null +++ b/HDD/HGST/HDN7240/HDN724040ALE640/488C8B9B145E @@ -0,0 +1,207 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN724040ALE640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5E0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:15 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 577) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 091 091 016 - 1048616 + 2 Throughput_Performance P-S--- 105 105 054 - 186 + 3 Spin_Up_Time POS--- 137 137 024 - 590 (Average 534) + 4 Start_Stop_Count -O--C- 100 100 000 - 246 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 183 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 117 117 020 - 36 + 9 Power_On_Hours -O--C- 095 095 000 - 40438 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 244 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 2318 +193 Load_Cycle_Count -O--C- 099 099 000 - 2318 +194 Temperature_Celsius -O---- 130 130 000 - 46 (Min/Max 9/70) +196 Reallocated_Event_Count -O--CK 075 075 000 - 610 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3105 - +# 2 Extended offline Completed without error 00% 3001 - +# 3 Extended offline Completed without error 00% 2686 - +# 4 Extended offline Interrupted (host reset) 70% 2065 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 44/58 Celsius +Lifetime Min/Max Temperature: 9/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (48) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 244 --- Lifetime Power-On Resets +0x01 0x018 6 32179065466 --- Logical Sectors Written +0x01 0x020 6 678369685 --- Number of Write Commands +0x01 0x028 6 1190674328691 --- Logical Sectors Read +0x01 0x030 6 13793626890 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 40430 --- Spindle Motor Power-on Hours +0x03 0x010 4 40430 --- Head Flying Hours +0x03 0x018 4 2318 --- Head Load Events +0x03 0x020 4 183 --- Number of Reallocated Logical Sectors +0x03 0x028 4 17790 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 16 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 46 --- Current Temperature +0x05 0x010 1 46 N-- Average Short Term Temperature +0x05 0x018 1 48 N-- Average Long Term Temperature +0x05 0x020 1 70 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 65 N-- Highest Average Short Term Temperature +0x05 0x038 1 23 N-- Lowest Average Short Term Temperature +0x05 0x040 1 57 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 24970 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 31603 --- Number of Hardware Resets +0x06 0x010 4 8834 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HDN7240/HDN724040ALE640/5521745140C4 b/HDD/HGST/HDN7240/HDN724040ALE640/5521745140C4 new file mode 100644 index 000000000..717559c3c --- /dev/null +++ b/HDD/HGST/HDN7240/HDN724040ALE640/5521745140C4 @@ -0,0 +1,207 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN724040ALE640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5E0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:17 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 561) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 086 086 016 - 4522043 + 2 Throughput_Performance P-S--- 136 136 054 - 80 + 3 Spin_Up_Time POS--- 134 134 024 - 595 (Average 561) + 4 Start_Stop_Count -O--C- 100 100 000 - 230 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 1 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 119 119 020 - 35 + 9 Power_On_Hours -O--C- 095 095 000 - 39839 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 230 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1848 +193 Load_Cycle_Count -O--C- 099 099 000 - 1848 +194 Temperature_Celsius -O---- 127 127 000 - 47 (Min/Max 9/73) +196 Reallocated_Event_Count -O--CK 100 100 000 - 1 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2500 - +# 2 Extended offline Completed without error 00% 2396 - +# 3 Extended offline Completed without error 00% 2081 - +# 4 Extended offline Interrupted (host reset) 70% 1461 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 46/60 Celsius +Lifetime Min/Max Temperature: 9/73 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (103) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 230 --- Lifetime Power-On Resets +0x01 0x018 6 36076300470 --- Logical Sectors Written +0x01 0x020 6 694463895 --- Number of Write Commands +0x01 0x028 6 1168110430781 --- Logical Sectors Read +0x01 0x030 6 13315678151 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 39832 --- Spindle Motor Power-on Hours +0x03 0x010 4 39832 --- Head Flying Hours +0x03 0x018 4 1848 --- Head Load Events +0x03 0x020 4 1 --- Number of Reallocated Logical Sectors +0x03 0x028 4 728624 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x010 1 47 N-- Average Short Term Temperature +0x05 0x018 1 49 N-- Average Long Term Temperature +0x05 0x020 1 73 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 67 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 60 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 57440 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 29232 --- Number of Hardware Resets +0x06 0x010 4 8818 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HDN7240/HDN724040ALE640/939474E33D95 b/HDD/HGST/HDN7240/HDN724040ALE640/939474E33D95 new file mode 100644 index 000000000..65891c703 --- /dev/null +++ b/HDD/HGST/HDN7240/HDN724040ALE640/939474E33D95 @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN724040ALE640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5E0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:25 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 575) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 138 138 054 - 76 + 3 Spin_Up_Time POS--- 137 137 024 - 607 (Average 518) + 4 Start_Stop_Count -O--C- 100 100 000 - 247 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 095 095 000 - 41312 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 247 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1899 +193 Load_Cycle_Count -O--C- 099 099 000 - 1899 +194 Temperature_Celsius -O---- 122 122 000 - 49 (Min/Max 9/71) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3988 - +# 2 Extended offline Completed without error 00% 3884 - +# 3 Extended offline Completed without error 00% 3569 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 49 Celsius +Power Cycle Min/Max Temperature: 46/61 Celsius +Lifetime Min/Max Temperature: 9/71 Celsius +Under/Over Temperature Limit Count: 0/1 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (23) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 247 --- Lifetime Power-On Resets +0x01 0x018 6 31206231007 --- Logical Sectors Written +0x01 0x020 6 655786716 --- Number of Write Commands +0x01 0x028 6 1219450858046 --- Logical Sectors Read +0x01 0x030 6 14243510352 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 41304 --- Spindle Motor Power-on Hours +0x03 0x010 4 41304 --- Head Flying Hours +0x03 0x018 4 1899 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 82 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 49 --- Current Temperature +0x05 0x010 1 48 N-- Average Short Term Temperature +0x05 0x018 1 50 N-- Average Long Term Temperature +0x05 0x020 1 71 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 65 N-- Highest Average Short Term Temperature +0x05 0x038 1 22 N-- Lowest Average Short Term Temperature +0x05 0x040 1 58 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 44050 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 14148 --- Number of Hardware Resets +0x06 0x010 4 8850 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HDN7240/HDN724040ALE640/B589CEFFC2E6 b/HDD/HGST/HDN7240/HDN724040ALE640/B589CEFFC2E6 new file mode 100644 index 000000000..0173a069e --- /dev/null +++ b/HDD/HGST/HDN7240/HDN724040ALE640/B589CEFFC2E6 @@ -0,0 +1,207 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN724040ALE640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5E0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:12 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 567) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 80 + 3 Spin_Up_Time POS--- 137 137 024 - 594 (Average 535) + 4 Start_Stop_Count -O--C- 100 100 000 - 244 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 119 119 020 - 35 + 9 Power_On_Hours -O--C- 095 095 000 - 40796 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 244 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1867 +193 Load_Cycle_Count -O--C- 099 099 000 - 1867 +194 Temperature_Celsius -O---- 125 125 000 - 48 (Min/Max 9/74) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3452 - +# 2 Extended offline Completed without error 00% 3348 - +# 3 Extended offline Completed without error 00% 3033 - +# 4 Extended offline Interrupted (host reset) 70% 2413 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 46/61 Celsius +Lifetime Min/Max Temperature: 9/74 Celsius +Under/Over Temperature Limit Count: 0/64 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (54) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 244 --- Lifetime Power-On Resets +0x01 0x018 6 31317400054 --- Logical Sectors Written +0x01 0x020 6 662876339 --- Number of Write Commands +0x01 0x028 6 1213135899284 --- Logical Sectors Read +0x01 0x030 6 14067672823 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 40788 --- Spindle Motor Power-on Hours +0x03 0x010 4 40788 --- Head Flying Hours +0x03 0x018 4 1867 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 4813 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 48 --- Current Temperature +0x05 0x010 1 47 N-- Average Short Term Temperature +0x05 0x018 1 50 N-- Average Long Term Temperature +0x05 0x020 1 74 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 69 N-- Highest Average Short Term Temperature +0x05 0x038 1 21 N-- Lowest Average Short Term Temperature +0x05 0x040 1 61 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 84820 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 22051 --- Number of Hardware Resets +0x06 0x010 4 8850 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HDN7240/HDN724040ALE640/C8DDC865ACC8 b/HDD/HGST/HDN7240/HDN724040ALE640/C8DDC865ACC8 new file mode 100644 index 000000000..ba8492bfd --- /dev/null +++ b/HDD/HGST/HDN7240/HDN724040ALE640/C8DDC865ACC8 @@ -0,0 +1,207 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN724040ALE640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5E0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:20 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 578) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 81 + 3 Spin_Up_Time POS--- 135 135 024 - 625 (Average 518) + 4 Start_Stop_Count -O--C- 100 100 000 - 233 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 095 095 000 - 40276 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 233 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1844 +193 Load_Cycle_Count -O--C- 099 099 000 - 1844 +194 Temperature_Celsius -O---- 127 127 000 - 47 (Min/Max 8/67) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2932 - +# 2 Extended offline Completed without error 00% 2829 - +# 3 Extended offline Completed without error 00% 2513 - +# 4 Extended offline Interrupted (host reset) 70% 1893 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 45/58 Celsius +Lifetime Min/Max Temperature: 8/67 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (96) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 233 --- Lifetime Power-On Resets +0x01 0x018 6 30855883062 --- Logical Sectors Written +0x01 0x020 6 653205554 --- Number of Write Commands +0x01 0x028 6 1188188630863 --- Logical Sectors Read +0x01 0x030 6 13751950856 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 40269 --- Spindle Motor Power-on Hours +0x03 0x010 4 40269 --- Head Flying Hours +0x03 0x018 4 1844 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 2 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x010 1 47 N-- Average Short Term Temperature +0x05 0x018 1 48 N-- Average Long Term Temperature +0x05 0x020 1 67 --- Highest Temperature +0x05 0x028 1 8 --- Lowest Temperature +0x05 0x030 1 62 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 55 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 5100 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 15939 --- Number of Hardware Resets +0x06 0x010 4 4492 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HDN7240/HDN724040ALE640/CF51B5612CE3 b/HDD/HGST/HDN7240/HDN724040ALE640/CF51B5612CE3 new file mode 100644 index 000000000..a83609e0b --- /dev/null +++ b/HDD/HGST/HDN7240/HDN724040ALE640/CF51B5612CE3 @@ -0,0 +1,208 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN724040ALE640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5E0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:10 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 568) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 098 098 016 - 196610 + 2 Throughput_Performance P-S--- 136 136 054 - 81 + 3 Spin_Up_Time POS--- 136 136 024 - 626 (Average 511) + 4 Start_Stop_Count -O--C- 100 100 000 - 228 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 117 117 020 - 36 + 9 Power_On_Hours -O--C- 095 095 000 - 39816 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 228 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1823 +193 Load_Cycle_Count -O--C- 099 099 000 - 1823 +194 Temperature_Celsius -O---- 125 125 000 - 48 (Min/Max 9/75) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 8 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2475 - +# 2 Short offline Completed without error 00% 2467 - +# 3 Extended offline Completed without error 00% 2372 - +# 4 Extended offline Completed without error 00% 2056 - +# 5 Extended offline Interrupted (host reset) 70% 1436 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 46/61 Celsius +Lifetime Min/Max Temperature: 9/75 Celsius +Under/Over Temperature Limit Count: 0/382 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (123) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 228 --- Lifetime Power-On Resets +0x01 0x018 6 30702457897 --- Logical Sectors Written +0x01 0x020 6 633941803 --- Number of Write Commands +0x01 0x028 6 1164813576368 --- Logical Sectors Read +0x01 0x030 6 13460510274 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 39809 --- Spindle Motor Power-on Hours +0x03 0x010 4 39808 --- Head Flying Hours +0x03 0x018 4 1823 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 219 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 48 --- Current Temperature +0x05 0x010 1 48 N-- Average Short Term Temperature +0x05 0x018 1 50 N-- Average Long Term Temperature +0x05 0x020 1 75 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 69 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 62 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 120900 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 23450 --- Number of Hardware Resets +0x06 0x010 4 8646 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HDN7260/HDN726040ALE614/0A82821CCE49 b/HDD/HGST/HDN7260/HDN726040ALE614/0A82821CCE49 new file mode 100644 index 000000000..38a15149a --- /dev/null +++ b/HDD/HGST/HDN7260/HDN726040ALE614/0A82821CCE49 @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Deskstar NAS +Device Model: HGST HDN726040ALE614 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: APGNW7JH +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 21 03:11:50 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 113) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 571) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 138 138 054 - 100 + 3 Spin_Up_Time POS--- 139 139 024 - 464 (Average 481) + 4 Start_Stop_Count -O--C- 099 099 000 - 4042 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 099 099 000 - 11064 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1289 +192 Power-Off_Retract_Count -O--CK 096 096 000 - 5581 +193 Load_Cycle_Count -O--C- 096 096 000 - 5581 +194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 17/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 25/37 Celsius +Lifetime Min/Max Temperature: 17/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (115) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1289 --- Lifetime Power-On Resets +0x01 0x018 6 41479627786 --- Logical Sectors Written +0x01 0x020 6 200024731 --- Number of Write Commands +0x01 0x028 6 32960943341 --- Logical Sectors Read +0x01 0x030 6 180068592 --- Number of Read Commands +0x01 0x038 6 1595013107557 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 9323 --- Spindle Motor Power-on Hours +0x03 0x010 4 9323 --- Head Flying Hours +0x03 0x018 4 5581 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 630534 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 16 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 35 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 37 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4 --- Number of Hardware Resets +0x06 0x010 4 1047 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HDN7280/HDN728080ALE604/22F3ABA55779 b/HDD/HGST/HDN7280/HDN728080ALE604/22F3ABA55779 new file mode 100644 index 000000000..39bcb9546 --- /dev/null +++ b/HDD/HGST/HDN7280/HDN728080ALE604/22F3ABA55779 @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HGST HDN728080ALE604 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: A4GNW91X +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 14:23:41 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1217) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 133 133 054 - 108 + 3 Spin_Up_Time POS--- 171 171 024 - 423 (Average 346) + 4 Start_Stop_Count -O--C- 100 100 000 - 136 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 097 097 000 - 24129 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 131 + 22 Unknown_Attribute PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1112 +193 Load_Cycle_Count -O--C- 100 100 000 - 1112 +194 Temperature_Celsius -O---- 162 162 000 - 37 (Min/Max 19/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 35/37 Celsius +Lifetime Min/Max Temperature: 19/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (47) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 131 --- Lifetime Power-On Resets +0x01 0x018 6 105854197941 --- Logical Sectors Written +0x01 0x020 6 1349514182 --- Number of Write Commands +0x01 0x028 6 209719713362 --- Logical Sectors Read +0x01 0x030 6 1070410721 --- Number of Read Commands +0x01 0x038 6 86867029000 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 23579 --- Spindle Motor Power-on Hours +0x03 0x010 4 23579 --- Head Flying Hours +0x03 0x018 4 1112 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1431690 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 36 N-- Average Short Term Temperature +0x05 0x018 1 35 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2 --- Number of Hardware Resets +0x06 0x010 4 352 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HTS5410/HTS541010A7E630/19DFD1DCA5F5 b/HDD/HGST/HTS5410/HTS541010A7E630/19DFD1DCA5F5 new file mode 100644 index 000000000..38dc49404 --- /dev/null +++ b/HDD/HGST/HTS5410/HTS541010A7E630/19DFD1DCA5F5 @@ -0,0 +1,103 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Travelstar Z5K1000 +Device Model: HGST HTS541010A7E630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: SE0OA4G0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 22:00:36 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 219) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 062 Pre-fail Always - 0 + 2 Throughput_Performance 0x0025 100 100 040 Pre-fail Offline - 0 + 3 Spin_Up_Time 0x0023 124 100 033 Pre-fail Always - 1 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1178 + 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0025 100 100 040 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 2305 + 10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1175 +183 Runtime_Bad_Block 0x0032 100 100 001 Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 4294967296 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 072 056 045 Old_age Always - 28 (Min/Max 20/28) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 62 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1048592 +193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 29317 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0 +223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/HGST/HTS5410/HTS541010A9E680/75E82D6A0509 b/HDD/HGST/HTS5410/HTS541010A9E680/75E82D6A0509 new file mode 100644 index 000000000..c97a1299e --- /dev/null +++ b/HDD/HGST/HTS5410/HTS541010A9E680/75E82D6A0509 @@ -0,0 +1,164 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Travelstar 5K1000 +Device Model: HGST HTS541010A9E680 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: JA0OA560 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 14 22:30:43 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 1 (minimum power consumption with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 241) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 253 253 033 - 0 + 4 Start_Stop_Count -O--C- 022 022 000 - 124330 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 039 039 000 - 27013 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1295 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 21 +193 Load_Cycle_Count -O--C- 001 001 000 - 6506402 +194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 11/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 23/44 Celsius +Lifetime Min/Max Temperature: 11/44 Celsius +Specified Max Operating Temperature: 30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (46) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 29 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 29 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HTS5410/HTS541010A9E680/9535F80C2C9D b/HDD/HGST/HTS5410/HTS541010A9E680/9535F80C2C9D new file mode 100644 index 000000000..d15376329 --- /dev/null +++ b/HDD/HGST/HTS5410/HTS541010A9E680/9535F80C2C9D @@ -0,0 +1,164 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Travelstar 5K1000 +Device Model: HGST HTS541010A9E680 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: JA0OA560 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 14 22:30:44 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 1 (minimum power consumption with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 226) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 253 253 033 - 0 + 4 Start_Stop_Count -O--C- 059 059 000 - 65760 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 028 028 000 - 31836 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 507 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 14 +193 Load_Cycle_Count -O--C- 001 001 000 - 6460349 +194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 12/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 25/45 Celsius +Lifetime Min/Max Temperature: 12/46 Celsius +Specified Max Operating Temperature: 31 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (116) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 29 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 29 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HTS5410/HTS541010A9E680/ED665F663F2A b/HDD/HGST/HTS5410/HTS541010A9E680/ED665F663F2A new file mode 100644 index 000000000..9974cd60d --- /dev/null +++ b/HDD/HGST/HTS5410/HTS541010A9E680/ED665F663F2A @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Travelstar 5K1000 +Device Model: HGST HTS541010A9E680 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: JA0OA750 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 13:42:27 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 238) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance --S--- 198 198 000 - 125 + 3 Spin_Up_Time POS--- 217 217 033 - 1 + 4 Start_Stop_Count -O--C- 097 097 000 - 5786 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 000 - 0 + 8 Seek_Time_Performance --S--- 115 115 000 - 34 + 9 Power_On_Hours -O--C- 092 092 000 - 3729 + 10 Spin_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 097 097 000 - 5681 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 362 +193 Load_Cycle_Count -O--C- 097 097 000 - 39419 +194 Temperature_Celsius -O---- 253 253 000 - 15 (Min/Max 7/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 +240 Head_Flying_Hours -O--CK 092 092 000 - 3624 +241 Total_LBAs_Written -O--CK 100 100 000 - 58646979936 +242 Total_LBAs_Read -O--CK 100 100 000 - 23891505923 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3175 - +# 2 Short offline Completed without error 00% 3173 - +# 3 Short offline Completed without error 00% 3172 - +# 4 Short offline Completed without error 00% 2751 - +# 5 Short offline Aborted by host 30% 1399 - +# 6 Short offline Completed without error 00% 1282 - +# 7 Short offline Aborted by host 90% 346 - +# 8 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 15 Celsius +Power Cycle Min/Max Temperature: 14/15 Celsius +Lifetime Min/Max Temperature: 7/44 Celsius +Specified Max Operating Temperature: 29 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (5) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/HGST/HTS5450/HTS545050A7E680/E12BC110DA63 b/HDD/HGST/HTS5450/HTS545050A7E680/E12BC110DA63 new file mode 100644 index 000000000..7e058de70 --- /dev/null +++ b/HDD/HGST/HTS5450/HTS545050A7E680/E12BC110DA63 @@ -0,0 +1,163 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-BETA2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar Z5K500 +Device Model: HGST HTS545050A7E680 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: GR2OA3E0 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Sep 20 23:03:46 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 114) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 252 252 033 - 1 + 4 Start_Stop_Count -O--C- 098 098 000 - 4410 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 096 096 000 - 2072 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 2343 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 57 +193 Load_Cycle_Count -O--C- 093 093 000 - 78104 +194 Temperature_Celsius -O---- 206 206 000 - 29 (Min/Max 17/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 50% 1076 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 26/30 Celsius +Lifetime Min/Max Temperature: 17/53 Celsius +Specified Max Operating Temperature: 33 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (60) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 20 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/HGST/HTS7210/HTS721010A9E630/05DF805AB712 b/HDD/HGST/HTS7210/HTS721010A9E630/05DF805AB712 new file mode 100644 index 000000000..0999c488c --- /dev/null +++ b/HDD/HGST/HTS7210/HTS721010A9E630/05DF805AB712 @@ -0,0 +1,175 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Travelstar 7K1000 +Device Model: HGST HTS721010A9E630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: JB0OA3P0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 30 21:59:14 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 170) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance --S--- 100 100 000 - 0 + 3 Spin_Up_Time POS--- 119 119 033 - 2 + 4 Start_Stop_Count -O--C- 098 098 000 - 3854 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 000 - 0 + 8 Seek_Time_Performance --S--- 100 100 000 - 0 + 9 Power_On_Hours -O--C- 042 042 000 - 25734 + 10 Spin_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 3840 +191 G-Sense_Error_Rate -O-R-- 099 099 000 - 65537 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 74 +193 Load_Cycle_Count -O--C- 091 091 000 - 91414 +194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 12/63) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 +240 Head_Flying_Hours -O--CK 099 099 000 - 789 +241 Total_LBAs_Written -O--CK 100 100 000 - 54651436894 +242 Total_LBAs_Read -O--CK 099 099 000 - 114542932271 +254 Free_Fall_Sensor -O--CK 100 100 000 - 2 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 20882 - +# 2 Short offline Completed without error 00% 20882 - +# 3 Short offline Completed without error 00% 18216 - +# 4 Extended offline Completed without error 00% 6512 - +# 5 Short offline Completed without error 00% 5464 - +# 6 Short offline Completed without error 00% 30 - +# 7 Short offline Completed without error 00% 26 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 28/39 Celsius +Lifetime Min/Max Temperature: 12/63 Celsius +Specified Max Operating Temperature: 37 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (11) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HTS7250/HTS725025A7E630/4109918180EF b/HDD/HGST/HTS7250/HTS725025A7E630/4109918180EF new file mode 100644 index 000000000..a9292d6f6 --- /dev/null +++ b/HDD/HGST/HTS7250/HTS725025A7E630/4109918180EF @@ -0,0 +1,252 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar Z7K500 +Device Model: HGST HTS725025A7E630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: GSEOA230 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 1 18:12:27 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 44) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance --S--- 100 100 000 - 0 + 3 Spin_Up_Time POS--- 253 253 033 - 1 + 4 Start_Stop_Count -O--C- 087 087 000 - 20933 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 000 - 0 + 8 Seek_Time_Performance --S--- 100 100 000 - 0 + 9 Power_On_Hours -O--C- 098 098 000 - 1040 + 10 Spin_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 895 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 102 +193 Load_Cycle_Count -O--C- 089 089 000 - 111120 +194 Temperature_Celsius -O---- 142 142 000 - 42 (Min/Max 10/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 16 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 +240 Head_Flying_Hours -O--CK 099 099 000 - 561 +241 Total_LBAs_Written -O--CK 100 100 000 - 7218441567 +242 Total_LBAs_Read -O--CK 100 100 000 - 6892424943 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1058 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1058 [1] occurred at disk power-on lifetime: 901 hours (37 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 78 00 00 06 47 b1 d0 06 00 Error: UNC at LBA = 0x0647b1d0 = 105361872 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 a8 00 d8 00 00 06 47 b1 a0 40 00 00:04:42.892 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:04:42.891 READ LOG EXT + 60 00 a8 00 c8 00 00 06 47 b1 a0 40 00 00:04:39.967 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:04:39.966 READ LOG EXT + 60 00 a8 00 b8 00 00 06 47 b1 a0 40 00 00:04:37.042 READ FPDMA QUEUED + +Error 1057 [0] occurred at disk power-on lifetime: 901 hours (37 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 78 00 00 06 47 b1 d0 06 00 Error: UNC at LBA = 0x0647b1d0 = 105361872 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 a8 00 c8 00 00 06 47 b1 a0 40 00 00:04:39.967 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:04:39.966 READ LOG EXT + 60 00 a8 00 b8 00 00 06 47 b1 a0 40 00 00:04:37.042 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:04:37.041 READ LOG EXT + 60 00 a8 00 a8 00 00 06 47 b1 a0 40 00 00:04:34.108 READ FPDMA QUEUED + +Error 1056 [3] occurred at disk power-on lifetime: 901 hours (37 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 78 00 00 06 47 b1 d0 06 00 Error: UNC at LBA = 0x0647b1d0 = 105361872 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 a8 00 b8 00 00 06 47 b1 a0 40 00 00:04:37.042 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:04:37.041 READ LOG EXT + 60 00 a8 00 a8 00 00 06 47 b1 a0 40 00 00:04:34.108 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:04:34.108 READ LOG EXT + 61 00 08 00 98 00 00 1d 1c 57 a8 40 00 00:04:31.193 WRITE FPDMA QUEUED + +Error 1055 [2] occurred at disk power-on lifetime: 901 hours (37 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 78 00 00 06 47 b1 d0 06 00 Error: UNC at LBA = 0x0647b1d0 = 105361872 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 a8 00 a8 00 00 06 47 b1 a0 40 00 00:04:34.108 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:04:34.108 READ LOG EXT + 61 00 08 00 98 00 00 1d 1c 57 a8 40 00 00:04:31.193 WRITE FPDMA QUEUED + 61 00 08 00 90 00 00 1d 1c 55 a8 40 00 00:04:31.193 WRITE FPDMA QUEUED + 60 00 a8 00 88 00 00 06 47 b1 a0 40 00 00:04:31.192 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short captive Completed without error 00% 332 - +# 2 Short offline Completed without error 00% 329 - +# 3 Short offline Completed without error 00% 329 - +# 4 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 39/44 Celsius +Lifetime Min/Max Temperature: 10/50 Celsius +Specified Max Operating Temperature: 36 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (57) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 40 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 33 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/HGST/HTS7250/HTS725050A7E630/29EB5B514138 b/HDD/HGST/HTS7250/HTS725050A7E630/29EB5B514138 new file mode 100644 index 000000000..bf0481497 --- /dev/null +++ b/HDD/HGST/HTS7250/HTS725050A7E630/29EB5B514138 @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar Z7K500 +Device Model: HGST HTS725050A7E630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: GH2OA440 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 17:18:32 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 94) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 + 2 Throughput_Performance P-S--K 100 100 040 - 0 + 3 Spin_Up_Time PO---K 235 100 033 - 1 + 4 Start_Stop_Count -O--CK 100 100 000 - 427 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-K 100 100 067 - 0 + 8 Seek_Time_Performance P-S--K 100 100 040 - 0 + 9 Power_On_Hours -O--CK 014 014 000 - 38067 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 426 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 8590131200 +188 Command_Timeout -O--CK 100 100 000 - 1335 +190 Airflow_Temperature_Cel -O---K 074 052 045 - 26 (Min/Max 23/30) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 38 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 2359332 +193 Load_Cycle_Count -O--CK 001 001 000 - 3915037 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 +223 Load_Retry_Count -O-R-K 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 23/30 Celsius +Lifetime Min/Max Temperature: 10/48 Celsius +Specified Max Operating Temperature: 32 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (105) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/HGST/HTS7250/HTS725050A7E630/3FA92583263C b/HDD/HGST/HTS7250/HTS725050A7E630/3FA92583263C new file mode 100644 index 000000000..38726895d --- /dev/null +++ b/HDD/HGST/HTS7250/HTS725050A7E630/3FA92583263C @@ -0,0 +1,255 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar Z7K500 +Device Model: HGST HTS725050A7E630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: GH2ZB550 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 18 15:12:21 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 88) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 235 235 033 - 1 + 4 Start_Stop_Count -O--C- 098 098 000 - 4193 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 071 071 000 - 13100 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 3008 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 2031712 +193 Load_Cycle_Count -O--C- 099 099 000 - 17512 +194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 10/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 78 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 78 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 78 [1] occurred at disk power-on lifetime: 10253 hours (427 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 05 91 00 00 19 02 dd df 09 00 Error: ICRC, ABRT at LBA = 0x1902dddf = 419618271 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 60 00 88 00 00 19 02 ed 70 40 08 00:04:29.099 WRITE FPDMA QUEUED + 61 0a 00 00 80 00 00 19 02 e3 70 40 08 00:04:29.099 WRITE FPDMA QUEUED + 61 05 a0 00 78 00 00 19 02 dd d0 40 08 00:04:29.099 WRITE FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:04:29.098 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:29.098 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 77 [0] occurred at disk power-on lifetime: 10253 hours (427 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 05 91 00 00 19 02 dd df 09 00 Error: ICRC, ABRT at LBA = 0x1902dddf = 419618271 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 60 00 88 00 00 19 02 ed 70 40 08 00:04:28.606 WRITE FPDMA QUEUED + 61 0a 00 00 80 00 00 19 02 e3 70 40 08 00:04:28.606 WRITE FPDMA QUEUED + 61 05 a0 00 78 00 00 19 02 dd d0 40 08 00:04:28.606 WRITE FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:04:28.606 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:28.606 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 76 [3] occurred at disk power-on lifetime: 10253 hours (427 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 05 91 00 00 19 02 dd df 09 00 Error: ICRC, ABRT at LBA = 0x1902dddf = 419618271 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 60 00 88 00 00 19 02 ed 70 40 08 00:04:25.072 WRITE FPDMA QUEUED + 61 0a 00 00 80 00 00 19 02 e3 70 40 08 00:04:25.072 WRITE FPDMA QUEUED + 61 05 a0 00 78 00 00 19 02 dd d0 40 08 00:04:25.071 WRITE FPDMA QUEUED + 60 00 08 00 70 00 00 19 02 dd c8 40 08 00:04:25.071 READ FPDMA QUEUED + 60 00 08 00 68 00 00 19 02 dd c8 40 08 00:04:25.071 READ FPDMA QUEUED + +Error 75 [2] occurred at disk power-on lifetime: 10253 hours (427 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 09 c9 00 00 19 02 e4 07 09 00 Error: ICRC, ABRT at LBA = 0x1902e407 = 419619847 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 06 28 00 b0 00 00 19 02 dd d0 40 08 00:01:11.753 WRITE FPDMA QUEUED + 61 09 d8 00 a8 00 00 19 02 e3 f8 40 08 00:01:11.753 WRITE FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:01:11.753 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:01:11.752 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:01:11.752 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 10101 - +# 2 Short offline Completed without error 00% 10100 - +# 3 Vendor (0x50) Completed without error 00% 963 - +# 4 Short offline Completed without error 00% 963 - +# 5 Vendor (0x50) Completed without error 00% 190 - +# 6 Short offline Aborted by host 40% 190 - +# 7 Vendor (0x50) Completed without error 00% 12 - +# 8 Short offline Completed without error 00% 12 - +# 9 Vendor (0x50) Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 16/27 Celsius +Lifetime Min/Max Temperature: 10/50 Celsius +Specified Max Operating Temperature: 31 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (105) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HTS7250/HTS725050A7E630/B27623B0E874 b/HDD/HGST/HTS7250/HTS725050A7E630/B27623B0E874 new file mode 100644 index 000000000..9c7db57ac --- /dev/null +++ b/HDD/HGST/HTS7250/HTS725050A7E630/B27623B0E874 @@ -0,0 +1,99 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar Z7K500 +Device Model: HGST HTS725050A7E630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: GH2ZB550 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 31 19:16:10 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 93) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 --- Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 198 198 --- Pre-fail Offline - 104 + 3 Spin_Up_Time 0x0007 222 222 --- Pre-fail Always - 1 + 4 Start_Stop_Count 0x0012 098 098 --- Old_age Always - 4022 + 5 Reallocated_Sector_Ct 0x0033 100 100 --- Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 --- Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 112 112 --- Pre-fail Offline - 35 + 9 Power_On_Hours 0x0012 082 082 --- Old_age Always - 7911 + 10 Spin_Retry_Count 0x0013 100 100 --- Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 098 098 --- Old_age Always - 3770 +191 G-Sense_Error_Rate 0x000a 100 100 --- Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 131251 +193 Load_Cycle_Count 0x0012 035 035 --- Old_age Always - 655734 +194 Temperature_Celsius 0x0002 166 166 --- Old_age Always - 36 (Min/Max 13/50) +196 Reallocated_Event_Count 0x0032 100 100 --- Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 --- Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 --- Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 --- Old_age Always - 0 +223 Load_Retry_Count 0x000a 100 100 --- Old_age Always - 0 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/HGST/HUH7210/HUH721010ALE604/712C70C941B8 b/HDD/HGST/HUH7210/HUH721010ALE604/712C70C941B8 new file mode 100644 index 000000000..db20981c9 --- /dev/null +++ b/HDD/HGST/HUH7210/HUH721010ALE604/712C70C941B8 @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Ultrastar He10 +Device Model: HGST HUH721010ALE604 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: LHGNW384 +User Capacity: 10,000,830,266,880 bytes [10.0 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 23 21:11:18 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1085) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 134 134 054 - 96 + 3 Spin_Up_Time POS--- 149 149 024 - 442 (Average 441) + 4 Start_Stop_Count -O--C- 100 100 000 - 568 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 100 100 000 - 4912 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 438 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 097 097 000 - 4367 +193 Load_Cycle_Count -O--C- 097 097 000 - 4367 +194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 19/52) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4 - +# 2 Extended offline Aborted by host 90% 4 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 20/37 Celsius +Lifetime Min/Max Temperature: 19/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (3) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 438 --- Lifetime Power-On Resets +0x01 0x010 4 4912 --- Power-on Hours +0x01 0x018 6 38949572152 --- Logical Sectors Written +0x01 0x020 6 91862491 --- Number of Write Commands +0x01 0x028 6 48649786440 --- Logical Sectors Read +0x01 0x030 6 191796047 --- Number of Read Commands +0x01 0x038 6 17684297950 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3229 --- Spindle Motor Power-on Hours +0x03 0x010 4 3229 --- Head Flying Hours +0x03 0x018 4 4367 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 4181324 --- Read Recovery Attempts +0x03 0x030 4 1 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 36 N-- Average Short Term Temperature +0x05 0x018 1 36 N-- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 50 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 39 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2 --- Number of Hardware Resets +0x06 0x010 4 544 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HUH7280/HUH728060ALE600/6F874C7611E5 b/HDD/HGST/HUH7280/HUH728060ALE600/6F874C7611E5 new file mode 100644 index 000000000..2de27503c --- /dev/null +++ b/HDD/HGST/HUH7280/HUH728060ALE600/6F874C7611E5 @@ -0,0 +1,311 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Ultrastar He8 +Device Model: HGST HUH728060ALE600 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: A4GNT514 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 27 08:34:51 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 1 (minimum power consumption with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1003) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 133 133 054 - 108 + 3 Spin_Up_Time POS--- 144 144 024 - 456 (Average 458) + 4 Start_Stop_Count -O--C- 099 099 000 - 5505 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 094 094 000 - 43697 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 80 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 030 030 000 - 84966 +193 Load_Cycle_Count -O--C- 030 030 000 - 84966 +194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 16/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1023 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 128 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1023 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1023 [2] occurred at disk power-on lifetime: 42629 hours (1776 days + 5 hours) + When the command that caused the error occurred, the device was doing SMART Offline or Self-test. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 43 00 20 00 02 54 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x254000000 = 9999220736 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 70 00 68 00 02 54 cb 5d 88 40 08 18:04:47.828 WRITE FPDMA QUEUED + 61 00 f8 00 90 00 02 54 cb 5b 20 40 08 18:04:47.826 WRITE FPDMA QUEUED + 61 01 70 00 78 00 02 54 cb 5c 18 40 08 18:04:47.826 WRITE FPDMA QUEUED + 61 01 10 00 70 00 02 54 cb 5e f8 40 08 18:04:47.826 WRITE FPDMA QUEUED + 61 00 f0 00 60 00 02 54 cb 5a 30 40 08 18:04:47.826 WRITE FPDMA QUEUED + +Error 1022 [1] occurred at disk power-on lifetime: 42629 hours (1776 days + 5 hours) + When the command that caused the error occurred, the device was doing SMART Offline or Self-test. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 43 00 60 00 02 54 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x254000000 = 9999220736 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 70 00 88 00 02 54 cb 5d 88 40 08 18:04:47.463 WRITE FPDMA QUEUED + 61 01 10 00 50 00 02 54 cb 5e f8 40 08 18:04:47.462 WRITE FPDMA QUEUED + 61 01 70 00 48 00 02 54 cb 5c 18 40 08 18:04:47.462 WRITE FPDMA QUEUED + 61 00 f8 00 38 00 02 54 cb 5b 20 40 08 18:04:47.462 WRITE FPDMA QUEUED + 61 00 f0 00 a0 00 02 54 cb 5a 30 40 08 18:04:47.462 WRITE FPDMA QUEUED + +Error 1021 [0] occurred at disk power-on lifetime: 42629 hours (1776 days + 5 hours) + When the command that caused the error occurred, the device was doing SMART Offline or Self-test. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 43 01 88 00 02 54 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x254000000 = 9999220736 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 e8 00 d8 00 02 54 cb 4c a0 40 08 18:04:47.080 WRITE FPDMA QUEUED + 61 00 90 00 f0 00 02 54 cb 4e 88 40 08 18:04:47.080 WRITE FPDMA QUEUED + 61 00 e8 00 d0 00 02 54 cb 47 d8 40 08 18:04:47.075 WRITE FPDMA QUEUED + 61 00 f0 00 c8 00 02 54 cb 49 48 40 08 18:04:47.075 WRITE FPDMA QUEUED + 61 01 70 00 c0 00 02 54 cb 4a 38 40 08 18:04:47.075 WRITE FPDMA QUEUED + +Error 1020 [3] occurred at disk power-on lifetime: 42629 hours (1776 days + 5 hours) + When the command that caused the error occurred, the device was doing SMART Offline or Self-test. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 43 00 38 00 02 54 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x254000000 = 9999220736 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 e8 00 20 00 02 54 cb 47 d8 40 08 18:04:46.702 WRITE FPDMA QUEUED + 61 01 70 00 68 00 02 54 cb 4a 38 40 08 18:04:46.700 WRITE FPDMA QUEUED + 61 00 f0 00 48 00 02 54 cb 49 48 40 08 18:04:46.700 WRITE FPDMA QUEUED + 61 00 88 00 b8 00 02 54 cb 48 c0 40 08 18:04:46.700 WRITE FPDMA QUEUED + 61 00 f8 00 90 00 02 54 cb 4b a8 40 08 18:04:46.700 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 43677 - +# 2 Extended offline Completed without error 00% 43653 - +# 3 Short offline Completed without error 00% 43629 - +# 4 Short offline Completed without error 00% 43605 - +# 5 Short offline Completed without error 00% 43581 - +# 6 Short offline Completed without error 00% 43557 - +# 7 Extended offline Completed without error 00% 43533 - +# 8 Short offline Completed without error 00% 43509 - +# 9 Short offline Completed without error 00% 43485 - +#10 Short offline Completed without error 00% 43461 - +#11 Short offline Completed without error 00% 43437 - +#12 Extended offline Completed without error 00% 43413 - +#13 Short offline Completed without error 00% 43389 - +#14 Short offline Completed without error 00% 43365 - +#15 Short offline Completed without error 00% 43341 - +#16 Short offline Completed without error 00% 43319 - +#17 Extended offline Completed without error 00% 43296 - +#18 Short offline Completed without error 00% 43272 - +#19 Short offline Completed without error 00% 43248 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 22/39 Celsius +Lifetime Min/Max Temperature: 16/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (46) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 80 --- Lifetime Power-On Resets +0x01 0x018 6 205650524058 --- Logical Sectors Written +0x01 0x020 6 3608196595 --- Number of Write Commands +0x01 0x028 6 560628044021 --- Logical Sectors Read +0x01 0x030 6 6990187690 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 39828 --- Spindle Motor Power-on Hours +0x03 0x010 4 39826 --- Head Flying Hours +0x03 0x018 4 84966 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 34490405 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 852 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 29 N-- Average Short Term Temperature +0x05 0x018 1 31 N-- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 49 N-- Highest Average Short Term Temperature +0x05 0x038 1 22 N-- Lowest Average Short Term Temperature +0x05 0x040 1 35 N-- Highest Average Long Term Temperature +0x05 0x048 1 24 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5 --- Number of Hardware Resets +0x06 0x010 4 66 --- Number of ASR Events +0x06 0x018 4 1023 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HUS722/HUS722T2TALA604/1505137A42DB b/HDD/HGST/HUS722/HUS722T2TALA604/1505137A42DB new file mode 100644 index 000000000..cee0eaf22 --- /dev/null +++ b/HDD/HGST/HUS722/HUS722T2TALA604/1505137A42DB @@ -0,0 +1,228 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K2 +Device Model: HGST HUS722T2TALA604 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: RAGNWA09 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Jul 15 14:53:03 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 221) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x603d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 181 181 021 - 3916 + 4 Start_Stop_Count -O--CK 100 100 000 - 47 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 200 000 - 0 + 9 Power_On_Hours -O--CK 083 083 000 - 13027 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 47 + 16 Gas_Gauge -O---K 000 200 000 - 32677682455 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 23 +193 Load_Cycle_Count -O--CK 200 200 000 - 31 +194 Temperature_Celsius -O---K 116 110 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 113 Pending Defects log +0x0d GPL,SL R/O 8 LPS Mis-alignment log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 192 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xb6 GPL,SL VS 16 Device vendor specific log +0xb7 GPL,SL VS 39 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 26/37 Celsius +Lifetime Min/Max Temperature: 23/37 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (14) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 47 -D- Lifetime Power-On Resets +0x01 0x010 4 13027 -D- Power-on Hours +0x01 0x018 6 30734975871 -D- Logical Sectors Written +0x01 0x020 6 458199935 -D- Number of Write Commands +0x01 0x028 6 1942706584 -D- Logical Sectors Read +0x01 0x030 6 29165800 -D- Number of Read Commands +0x01 0x038 6 3947527040 -D- Date and Time TimeStamp +0x01 0x048 2 60 ND- Workload Utilization +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 13027 -D- Spindle Motor Power-on Hours +0x03 0x010 4 13026 -D- Head Flying Hours +0x03 0x018 4 55 -D- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 0 -D- Read Recovery Attempts +0x03 0x030 4 0 -D- Number of Mechanical Start Failures +0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 23 -D- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors +0x04 0x010 4 2299 -D- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 -D- Current Temperature +0x05 0x010 1 32 -D- Average Short Term Temperature +0x05 0x018 1 31 -D- Average Long Term Temperature +0x05 0x020 1 38 -D- Highest Temperature +0x05 0x028 1 23 -D- Lowest Temperature +0x05 0x030 1 36 -D- Highest Average Short Term Temperature +0x05 0x038 1 26 -D- Lowest Average Short Term Temperature +0x05 0x040 1 33 -D- Highest Average Long Term Temperature +0x05 0x048 1 27 -D- Lowest Average Long Term Temperature +0x05 0x050 4 0 -D- Time in Over-Temperature +0x05 0x058 1 60 -D- Specified Maximum Operating Temperature +0x05 0x060 4 0 -D- Time in Under-Temperature +0x05 0x068 1 0 -D- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2681 -D- Number of Hardware Resets +0x06 0x010 4 230 -D- Number of ASR Events +0x06 0x018 4 0 -D- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 0 Vendor specific + + + diff --git a/HDD/HGST/HUS722/HUS722T2TALA604/167BC10CD57A b/HDD/HGST/HUS722/HUS722T2TALA604/167BC10CD57A new file mode 100644 index 000000000..8bd0ca694 --- /dev/null +++ b/HDD/HGST/HUS722/HUS722T2TALA604/167BC10CD57A @@ -0,0 +1,228 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K2 +Device Model: HGST HUS722T2TALA604 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: RAGNWA09 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Jul 15 14:53:04 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 212) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x603d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 183 182 021 - 3841 + 4 Start_Stop_Count -O--CK 100 100 000 - 47 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 084 084 000 - 11837 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 47 + 16 Gas_Gauge -O---K 000 200 000 - 193921694 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 0 +193 Load_Cycle_Count -O--CK 200 200 000 - 1725 +194 Temperature_Celsius -O---K 122 114 000 - 25 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 113 Pending Defects log +0x0d GPL,SL R/O 8 LPS Mis-alignment log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 192 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xb6 GPL,SL VS 16 Device vendor specific log +0xb7 GPL,SL VS 39 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 20/32 Celsius +Lifetime Min/Max Temperature: 19/33 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (10) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 47 -D- Lifetime Power-On Resets +0x01 0x010 4 11837 -D- Power-on Hours +0x01 0x018 6 160782349 -D- Logical Sectors Written +0x01 0x020 6 737770 -D- Number of Write Commands +0x01 0x028 6 33139345 -D- Logical Sectors Read +0x01 0x030 6 433705 -D- Number of Read Commands +0x01 0x038 6 3958494336 -D- Date and Time TimeStamp +0x01 0x048 2 0 ND- Workload Utilization +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 11837 -D- Spindle Motor Power-on Hours +0x03 0x010 4 370 -D- Head Flying Hours +0x03 0x018 4 1725 -D- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 0 -D- Read Recovery Attempts +0x03 0x030 4 0 -D- Number of Mechanical Start Failures +0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 0 -D- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 -D- Current Temperature +0x05 0x010 1 25 -D- Average Short Term Temperature +0x05 0x018 1 25 -D- Average Long Term Temperature +0x05 0x020 1 34 -D- Highest Temperature +0x05 0x028 1 19 -D- Lowest Temperature +0x05 0x030 1 31 -D- Highest Average Short Term Temperature +0x05 0x038 1 21 -D- Lowest Average Short Term Temperature +0x05 0x040 1 28 -D- Highest Average Long Term Temperature +0x05 0x048 1 22 -D- Lowest Average Long Term Temperature +0x05 0x050 4 0 -D- Time in Over-Temperature +0x05 0x058 1 60 -D- Specified Maximum Operating Temperature +0x05 0x060 4 0 -D- Time in Under-Temperature +0x05 0x068 1 0 -D- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 463 -D- Number of Hardware Resets +0x06 0x010 4 310 -D- Number of ASR Events +0x06 0x018 4 0 -D- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 0 Vendor specific + + + diff --git a/HDD/HGST/HUS722/HUS722T2TALA604/2DA7E2D9FE07 b/HDD/HGST/HUS722/HUS722T2TALA604/2DA7E2D9FE07 new file mode 100644 index 000000000..5d4021526 --- /dev/null +++ b/HDD/HGST/HUS722/HUS722T2TALA604/2DA7E2D9FE07 @@ -0,0 +1,372 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RC3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K2 +Device Model: HGST HUS722T2TALA604 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: RAGNWA07 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 17:36:45 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 226) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x603d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 191 051 - 1 + 3 Spin_Up_Time POS--K 182 182 021 - 3858 + 4 Start_Stop_Count -O--CK 100 100 000 - 67 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 081 081 000 - 14389 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 66 + 16 Gas_Gauge -O---K 001 199 000 - 86289273707 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 42 +193 Load_Cycle_Count -O--CK 200 200 000 - 457 +194 Temperature_Celsius -O---K 119 108 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 11 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 113 Pending Defects log +0x0d GPL,SL R/O 8 LPS Mis-alignment log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 192 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xb6 GPL,SL VS 16 Device vendor specific log +0xb7 GPL,SL VS 39 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 572 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 572 [19] occurred at disk power-on lifetime: 7521 hours (313 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 01 00 00 00 ca 9d 86 3c 40 00 Error: UNC at LBA = 0xca9d863c = 3399321148 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 08 00 00 ca 9d 85 98 40 00 1d+17:22:32.736 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 08 1d+17:22:32.641 READ LOG EXT + 60 01 00 00 f8 00 00 cc 2c a8 bb 40 00 1d+17:22:30.465 READ FPDMA QUEUED + 60 01 00 00 f0 00 00 ca 9d 85 98 40 00 1d+17:22:30.464 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 08 1d+17:22:29.986 READ LOG EXT + +Error 571 [18] occurred at disk power-on lifetime: 7521 hours (313 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 01 00 00 00 ca 9d 86 3c 40 00 Error: UNC at LBA = 0xca9d863c = 3399321148 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 f0 00 00 ca 9d 85 98 40 00 1d+17:22:30.464 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 08 1d+17:22:29.986 READ LOG EXT + 61 00 16 00 e0 00 00 5a 00 6e 23 40 00 1d+17:22:27.288 WRITE FPDMA QUEUED + 61 00 09 00 d8 00 00 5a 00 6e 19 40 00 1d+17:22:27.288 WRITE FPDMA QUEUED + 61 00 03 00 d0 00 00 5a 00 6e 11 40 00 1d+17:22:27.288 WRITE FPDMA QUEUED + +Error 570 [17] occurred at disk power-on lifetime: 7521 hours (313 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 01 00 00 00 ca 9d 86 3c 40 00 Error: + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + +Error 569 [16] occurred at disk power-on lifetime: 7521 hours (313 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 01 00 00 00 ca 9d 86 3c 40 00 Error: + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + +Error 568 [15] occurred at disk power-on lifetime: 7521 hours (313 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 01 00 00 00 ca 9d 86 3c 40 00 Error: + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + +Error 567 [14] occurred at disk power-on lifetime: 7521 hours (313 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 01 00 00 00 ca 9d 86 3c 40 00 Error: UNC at LBA = 0xca9d863c = 3399321148 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 ca 9d 85 98 40 00 1d+17:22:19.899 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 08 1d+17:22:19.804 READ LOG EXT + 60 01 00 00 f0 00 00 ca 9d 87 98 40 00 1d+17:22:17.628 READ FPDMA QUEUED + 60 01 00 00 e8 00 00 ca 9d 86 98 40 00 1d+17:22:17.628 READ FPDMA QUEUED + 60 01 00 00 e0 00 00 ca 9d 85 98 40 00 1d+17:22:17.626 READ FPDMA QUEUED + +Error 566 [13] occurred at disk power-on lifetime: 7521 hours (313 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 01 00 00 00 ca 9d 86 3c 40 00 Error: UNC at LBA = 0xca9d863c = 3399321148 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 e0 00 00 ca 9d 85 98 40 00 1d+17:22:17.626 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 08 1d+17:22:17.523 READ LOG EXT + 60 01 00 00 d0 00 00 ca 9d 87 98 40 00 1d+17:22:15.347 READ FPDMA QUEUED + 60 01 00 00 c8 00 00 ca 9d 86 98 40 00 1d+17:22:15.347 READ FPDMA QUEUED + 60 01 00 00 c0 00 00 ca 9d 85 98 40 00 1d+17:22:15.345 READ FPDMA QUEUED + +Error 565 [12] occurred at disk power-on lifetime: 7521 hours (313 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 01 00 00 00 ca 9d 86 3c 40 00 Error: UNC at LBA = 0xca9d863c = 3399321148 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 c0 00 00 ca 9d 85 98 40 00 1d+17:22:15.345 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 08 1d+17:22:14.909 READ LOG EXT + 61 00 02 00 b0 00 00 12 0b 2e 0c 40 00 1d+17:22:12.739 WRITE FPDMA QUEUED + 61 00 08 00 a8 00 00 10 59 9d a3 40 00 1d+17:22:12.739 WRITE FPDMA QUEUED + 61 00 03 00 a0 00 00 10 59 86 e5 40 00 1d+17:22:12.738 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 25/28 Celsius +Lifetime Min/Max Temperature: 7/39 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (125) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 66 -D- Lifetime Power-On Resets +0x01 0x010 4 14389 -D- Power-on Hours +0x01 0x018 6 28700004930 -D- Logical Sectors Written +0x01 0x020 6 393871728 -D- Number of Write Commands +0x01 0x028 6 57589268777 -D- Logical Sectors Read +0x01 0x030 6 380585436 -D- Number of Read Commands +0x01 0x038 6 260792448 -D- Date and Time TimeStamp +0x01 0x048 2 160 ND- Workload Utilization +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 14389 -D- Spindle Motor Power-on Hours +0x03 0x010 4 9783 -D- Head Flying Hours +0x03 0x018 4 500 -D- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 395 -D- Read Recovery Attempts +0x03 0x030 4 0 -D- Number of Mechanical Start Failures +0x03 0x038 4 11 -D- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 42 -D- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 362 -D- Number of Reported Uncorrectable Errors +0x04 0x010 4 9 -D- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 -D- Current Temperature +0x05 0x010 1 25 -D- Average Short Term Temperature +0x05 0x018 1 24 -D- Average Long Term Temperature +0x05 0x020 1 40 -D- Highest Temperature +0x05 0x028 1 14 -D- Lowest Temperature +0x05 0x030 1 39 -D- Highest Average Short Term Temperature +0x05 0x038 1 20 -D- Lowest Average Short Term Temperature +0x05 0x040 1 35 -D- Highest Average Long Term Temperature +0x05 0x048 1 24 -D- Lowest Average Long Term Temperature +0x05 0x050 4 0 -D- Time in Over-Temperature +0x05 0x058 1 60 -D- Specified Maximum Operating Temperature +0x05 0x060 4 0 -D- Time in Under-Temperature +0x05 0x068 1 0 -D- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 227 -D- Number of Hardware Resets +0x06 0x010 4 158 -D- Number of ASR Events +0x06 0x018 4 2 -D- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +Index LBA Hours + 0 3065842379 7498 + 1 3065844557 7498 + 2 3154947572 7498 + 3 3349005320 7410 + 4 3360616208 7498 + 5 3368236977 7498 + 6 3399321148 7498 + 7 3414396006 7409 + 8 3414397942 7409 + 9 3500147320 7358 + 10 3563619283 7358 + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 0 Vendor specific + diff --git a/HDD/HGST/HUS722/HUS722T2TALA604/9AF2156FC8FB b/HDD/HGST/HUS722/HUS722T2TALA604/9AF2156FC8FB new file mode 100644 index 000000000..5a3292d44 --- /dev/null +++ b/HDD/HGST/HUS722/HUS722T2TALA604/9AF2156FC8FB @@ -0,0 +1,227 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K2 +Device Model: HGST HUS722T2TALA604 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: RAGNWA09 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Jul 15 14:53:09 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 215) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x603d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 182 182 021 - 3891 + 4 Start_Stop_Count -O--CK 100 100 000 - 45 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 200 000 - 0 + 9 Power_On_Hours -O--CK 083 083 000 - 13026 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 45 + 16 Gas_Gauge -O---K 000 200 000 - 31727438328 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 21 +193 Load_Cycle_Count -O--CK 200 200 000 - 33 +194 Temperature_Celsius -O---K 121 112 000 - 26 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 113 Pending Defects log +0x0d GPL,SL R/O 8 LPS Mis-alignment log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 192 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xb6 GPL,SL VS 16 Device vendor specific log +0xb7 GPL,SL VS 39 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3653 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 20/31 Celsius +Lifetime Min/Max Temperature: 20/35 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (163) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 45 -D- Lifetime Power-On Resets +0x01 0x010 4 13026 -D- Power-on Hours +0x01 0x018 6 23075593026 -D- Logical Sectors Written +0x01 0x020 6 430355402 -D- Number of Write Commands +0x01 0x028 6 8651845302 -D- Logical Sectors Read +0x01 0x030 6 54360405 -D- Number of Read Commands +0x01 0x038 6 3943927040 -D- Date and Time TimeStamp +0x01 0x048 2 59 ND- Workload Utilization +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 13026 -D- Spindle Motor Power-on Hours +0x03 0x010 4 13011 -D- Head Flying Hours +0x03 0x018 4 55 -D- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 0 -D- Read Recovery Attempts +0x03 0x030 4 0 -D- Number of Mechanical Start Failures +0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 21 -D- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors +0x04 0x010 4 589 -D- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 -D- Current Temperature +0x05 0x010 1 26 -D- Average Short Term Temperature +0x05 0x018 1 26 -D- Average Long Term Temperature +0x05 0x020 1 36 -D- Highest Temperature +0x05 0x028 1 20 -D- Lowest Temperature +0x05 0x030 1 34 -D- Highest Average Short Term Temperature +0x05 0x038 1 21 -D- Lowest Average Short Term Temperature +0x05 0x040 1 31 -D- Highest Average Long Term Temperature +0x05 0x048 1 21 -D- Lowest Average Long Term Temperature +0x05 0x050 4 0 -D- Time in Over-Temperature +0x05 0x058 1 60 -D- Specified Maximum Operating Temperature +0x05 0x060 4 0 -D- Time in Under-Temperature +0x05 0x068 1 0 -D- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 972 -D- Number of Hardware Resets +0x06 0x010 4 232 -D- Number of ASR Events +0x06 0x018 4 0 -D- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 0 Vendor specific + diff --git a/HDD/HGST/HUS7240/HUS724020ALA640/6004C4AE4825 b/HDD/HGST/HUS7240/HUS724020ALA640/6004C4AE4825 new file mode 100644 index 000000000..446f8ef31 --- /dev/null +++ b/HDD/HGST/HUS7240/HUS724020ALA640/6004C4AE4825 @@ -0,0 +1,129 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HGST HUS724020ALA640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MF6OAA70 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 23:09:25 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 28) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 324) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 79 + 3 Spin_Up_Time 0x0007 146 146 024 Pre-fail Always - 447 (Average 406) + 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 152 + 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 140 140 020 Pre-fail Offline - 26 + 9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 45071 + 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 121 +192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1213 +193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1213 +194 Temperature_Celsius 0x0002 142 142 000 Old_age Always - 42 (Min/Max 10/51) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1 + +SMART Error Log Version: 1 +ATA Error Count: 1 + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 occurred at disk power-on lifetime: 940 hours (39 days + 4 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 61 df e9 2e 09 Error: ICRC, ABRT 97 sectors at LBA = 0x092ee9df = 154069471 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 03 80 c0 e9 2e e0 00 03:22:57.223 READ DMA EXT + 35 03 80 c0 e7 2e e0 00 03:22:57.220 WRITE DMA EXT + 35 03 80 40 e7 2e e0 00 03:22:57.218 WRITE DMA EXT + 35 03 80 c0 e6 2e e0 00 03:22:57.215 WRITE DMA EXT + 35 03 80 40 e6 2e e0 00 03:22:57.213 WRITE DMA EXT + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 62 - +# 2 Short offline Completed without error 00% 58 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/HGST/HUS7240/HUS724020ALA640/689ECB7A07D6 b/HDD/HGST/HUS7240/HUS724020ALA640/689ECB7A07D6 new file mode 100644 index 000000000..94b9a1e68 --- /dev/null +++ b/HDD/HGST/HUS7240/HUS724020ALA640/689ECB7A07D6 @@ -0,0 +1,103 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HGST HUS724020ALA640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MF6OABY0 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Oct 26 13:25:13 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 28) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 335) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 84 + 3 Spin_Up_Time 0x0007 135 135 024 Pre-fail Always - 459 (Average 466) + 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 24 + 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 145 145 020 Pre-fail Offline - 24 + 9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 48801 + 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 24 +192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1918 +193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1918 +194 Temperature_Celsius 0x0002 139 139 000 Old_age Always - 43 (Min/Max 17/53) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 19934 - +# 2 Short offline Completed without error 00% 19932 - +# 3 Short offline Completed without error 00% 19932 - +# 4 Short offline Completed without error 00% 19924 - +# 5 Short offline Completed without error 00% 19915 - +# 6 Short offline Completed without error 00% 19915 - +# 7 Short offline Completed without error 00% 19877 - +# 8 Short offline Completed without error 00% 19869 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/HGST/HUS7240/HUS724020ALA640/C0DB9882FB97 b/HDD/HGST/HUS7240/HUS724020ALA640/C0DB9882FB97 new file mode 100644 index 000000000..4a626710a --- /dev/null +++ b/HDD/HGST/HUS7240/HUS724020ALA640/C0DB9882FB97 @@ -0,0 +1,216 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HGST HUS724020ALA640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MF6OAA70 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 22 11:33:22 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 28) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 322) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 80 + 3 Spin_Up_Time 0x0007 140 140 024 Pre-fail Always - 445 (Average 442) + 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 53 + 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 145 145 020 Pre-fail Offline - 24 + 9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 42179 + 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 52 +192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1246 +193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1246 +194 Temperature_Celsius 0x0002 162 162 000 Old_age Always - 37 (Min/Max 25/52) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 24 + +SMART Error Log Version: 1 +ATA Error Count: 24 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 24 occurred at disk power-on lifetime: 8488 hours (353 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 01 d7 85 e0 08 Error: ICRC, ABRT at LBA = 0x08e085d7 = 148932055 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 60 08 e0 d0 85 e0 40 00 00:01:39.947 READ FPDMA QUEUED + 60 08 90 08 86 e0 40 00 00:01:39.941 READ FPDMA QUEUED + 60 08 88 60 86 e0 40 00 00:01:39.933 READ FPDMA QUEUED + 60 08 78 20 87 e0 40 00 00:01:39.926 READ FPDMA QUEUED + 60 08 60 b0 87 e0 40 00 00:01:39.919 READ FPDMA QUEUED + +Error 23 occurred at disk power-on lifetime: 8488 hours (353 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 01 b7 87 e0 08 Error: ICRC, ABRT at LBA = 0x08e087b7 = 148932535 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 60 08 50 b0 87 e0 40 00 00:01:39.486 READ FPDMA QUEUED + 60 08 48 70 88 e0 40 00 00:01:39.486 READ FPDMA QUEUED + 60 08 40 a8 87 e0 40 00 00:01:39.478 READ FPDMA QUEUED + 60 08 e0 a8 88 e0 40 00 00:01:39.458 READ FPDMA QUEUED + 60 08 d8 08 00 00 40 00 00:01:39.458 READ FPDMA QUEUED + +Error 22 occurred at disk power-on lifetime: 8488 hours (353 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 01 07 00 00 00 Error: ICRC, ABRT at LBA = 0x00000007 = 7 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 60 08 68 00 00 00 40 00 00:01:39.005 READ FPDMA QUEUED + 60 08 60 a0 88 e0 40 00 00:01:39.005 READ FPDMA QUEUED + 60 08 50 00 88 e0 40 00 00:01:38.989 READ FPDMA QUEUED + ec 00 01 00 00 00 00 00 00:01:38.987 IDENTIFY DEVICE + 60 08 c8 00 00 00 40 00 00:01:38.982 READ FPDMA QUEUED + +Error 21 occurred at disk power-on lifetime: 8488 hours (353 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 01 07 00 00 00 Error: ICRC, ABRT at LBA = 0x00000007 = 7 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 60 08 b8 00 00 00 40 00 00:01:38.540 READ FPDMA QUEUED + ef 10 02 00 00 00 a0 00 00:01:38.384 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 e0 00 00:01:38.384 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 00 00:01:38.383 IDENTIFY DEVICE + ef 03 46 00 00 00 a0 00 00:01:38.383 SET FEATURES [Set transfer mode] + +Error 20 occurred at disk power-on lifetime: 8487 hours (353 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 01 07 00 00 00 Error: ICRC, ABRT at LBA = 0x00000007 = 7 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 60 08 58 00 00 00 40 00 00:02:19.386 READ FPDMA QUEUED + 60 08 50 9f 88 e0 40 00 00:02:19.386 READ FPDMA QUEUED + ef 10 02 00 00 00 a0 00 00:02:19.377 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 e0 00 00:02:19.377 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 00 00:02:19.376 IDENTIFY DEVICE + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 33299 - +# 2 Extended offline Completed without error 00% 33282 - +# 3 Extended offline Completed without error 00% 32693 - +# 4 Extended offline Completed without error 00% 32676 - +# 5 Extended offline Completed without error 00% 29228 - +# 6 Extended offline Completed without error 00% 29211 - +# 7 Extended offline Completed without error 00% 28458 - +# 8 Extended offline Completed without error 00% 28442 - +# 9 Extended offline Completed without error 00% 26855 - +#10 Extended offline Completed without error 00% 26838 - +#11 Extended offline Completed without error 00% 24994 - +#12 Extended offline Completed without error 00% 24977 - +#13 Extended offline Completed without error 00% 22695 - +#14 Extended offline Completed without error 00% 22562 - +#15 Extended offline Completed without error 00% 22546 - +#16 Extended offline Completed without error 00% 19638 - +#17 Extended offline Completed without error 00% 19621 - +#18 Extended offline Completed without error 00% 8573 - +#19 Extended offline Completed without error 00% 8556 - +#20 Extended offline Completed without error 00% 8538 - +#21 Short offline Completed without error 00% 8531 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/HGST/HUS7240/HUS724020ALA640/F33F5EFDC69D b/HDD/HGST/HUS7240/HUS724020ALA640/F33F5EFDC69D new file mode 100644 index 000000000..9606289ed --- /dev/null +++ b/HDD/HGST/HUS7240/HUS724020ALA640/F33F5EFDC69D @@ -0,0 +1,213 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-BETA2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HGST HUS724020ALA640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MF6OABY0 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 19 20:16:44 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 28) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 323) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 138 138 054 - 76 + 3 Spin_Up_Time POS--- 135 135 024 - 451 (Average 471) + 4 Start_Stop_Count -O--C- 100 100 000 - 66 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 142 142 020 - 25 + 9 Power_On_Hours -O--C- 093 093 000 - 54338 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 66 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1053 +193 Load_Cycle_Count -O--C- 100 100 000 - 1053 +194 Temperature_Celsius -O---- 142 142 000 - 42 (Min/Max 11/59) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 39192 - +# 2 Short offline Completed without error 00% 39184 - +# 3 Short offline Completed without error 00% 39184 - +# 4 Short offline Completed without error 00% 27425 - +# 5 Short offline Completed without error 00% 27424 - +# 6 Short offline Completed without error 00% 27424 - +# 7 Short offline Completed without error 00% 26048 - +# 8 Short offline Completed without error 00% 26046 - +# 9 Short offline Completed without error 00% 26046 - +#10 Short offline Completed without error 00% 18750 - +#11 Short offline Completed without error 00% 18749 - +#12 Short offline Completed without error 00% 18749 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 33/55 Celsius +Lifetime Min/Max Temperature: 11/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (84) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 66 --- Lifetime Power-On Resets +0x01 0x018 6 122702504016 --- Logical Sectors Written +0x01 0x020 6 1131336779 --- Number of Write Commands +0x01 0x028 6 857536839333 --- Logical Sectors Read +0x01 0x030 6 3947834827 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 54331 --- Spindle Motor Power-on Hours +0x03 0x010 4 54331 --- Head Flying Hours +0x03 0x018 4 1053 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 6 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 42 --- Current Temperature +0x05 0x010 1 41 N-- Average Short Term Temperature +0x05 0x018 1 41 N-- Average Long Term Temperature +0x05 0x020 1 59 --- Highest Temperature +0x05 0x028 1 11 --- Lowest Temperature +0x05 0x030 1 53 N-- Highest Average Short Term Temperature +0x05 0x038 1 18 N-- Lowest Average Short Term Temperature +0x05 0x040 1 47 N-- Highest Average Long Term Temperature +0x05 0x048 1 23 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 724 --- Number of Hardware Resets +0x06 0x010 4 649 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 33 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 32 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/HGST/HUS7240/HUS724040ALA640/BC0BBA7BEE5F b/HDD/HGST/HUS7240/HUS724040ALA640/BC0BBA7BEE5F new file mode 100644 index 000000000..8088f3d5e --- /dev/null +++ b/HDD/HGST/HUS7240/HUS724040ALA640/BC0BBA7BEE5F @@ -0,0 +1,203 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HGST HUS724040ALA640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MFAOAA70 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 24 01:59:59 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 544) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 138 138 054 - 76 + 3 Spin_Up_Time POS--- 100 100 024 - 0 + 4 Start_Stop_Count -O--C- 100 100 000 - 3 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 140 140 020 - 26 + 9 Power_On_Hours -O--C- 100 100 000 - 2021 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 87 +193 Load_Cycle_Count -O--C- 100 100 000 - 87 +194 Temperature_Celsius -O---- 200 200 000 - 30 (Min/Max 22/34) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 22/34 Celsius +Lifetime Min/Max Temperature: 22/34 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (69) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x018 6 0 --- Logical Sectors Written +0x01 0x020 6 0 --- Number of Write Commands +0x01 0x028 6 344 --- Logical Sectors Read +0x01 0x030 6 85 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2021 --- Spindle Motor Power-on Hours +0x03 0x010 4 2021 --- Head Flying Hours +0x03 0x018 4 87 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 30 N-- Average Short Term Temperature +0x05 0x018 1 30 N-- Average Long Term Temperature +0x05 0x020 1 34 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 32 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 31 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7 --- Number of Hardware Resets +0x06 0x010 4 7 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HUS7240/HUS724040ALA640/DF1D3ED20B44 b/HDD/HGST/HUS7240/HUS724040ALA640/DF1D3ED20B44 new file mode 100644 index 000000000..2385e79ef --- /dev/null +++ b/HDD/HGST/HUS7240/HUS724040ALA640/DF1D3ED20B44 @@ -0,0 +1,201 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HGST HUS724040ALA640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MFAOAA70 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 24 02:00:02 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 532) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 137 137 054 - 77 + 3 Spin_Up_Time POS--- 100 100 024 - 470 + 4 Start_Stop_Count -O--C- 100 100 000 - 6 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 142 142 020 - 25 + 9 Power_On_Hours -O--C- 100 100 000 - 2095 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 90 +193 Load_Cycle_Count -O--C- 100 100 000 - 90 +194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 23/35) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 23/35 Celsius +Lifetime Min/Max Temperature: 23/35 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (2) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x018 6 0 --- Logical Sectors Written +0x01 0x020 6 0 --- Number of Write Commands +0x01 0x028 6 364 --- Logical Sectors Read +0x01 0x030 6 96 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2094 --- Spindle Motor Power-on Hours +0x03 0x010 4 2094 --- Head Flying Hours +0x03 0x018 4 90 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 31 N-- Average Short Term Temperature +0x05 0x018 1 31 N-- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 33 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 32 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 9 --- Number of Hardware Resets +0x06 0x010 4 9 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/HGST/HUS7260/HUS726040ALA610/9AB5D1A5F616 b/HDD/HGST/HUS7260/HUS726040ALA610/9AB5D1A5F616 new file mode 100644 index 000000000..4c8e8180a --- /dev/null +++ b/HDD/HGST/HUS7260/HUS726040ALA610/9AB5D1A5F616 @@ -0,0 +1,227 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HGST Ultrastar 7K6000 +Device Model: HGST HUS726040ALA610 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: A5GNT907 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 27 08:34:51 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 1 (minimum power consumption with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 113) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 571) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 108 + 3 Spin_Up_Time POS--- 139 139 024 - 474 (Average 475) + 4 Start_Stop_Count -O--C- 099 099 000 - 6291 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 39 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 097 097 000 - 25413 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 92 +192 Power-Off_Retract_Count -O--CK 062 062 000 - 45869 +193 Load_Cycle_Count -O--C- 062 062 000 - 45869 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 18/52) +196 Reallocated_Event_Count -O--CK 100 100 000 - 39 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 25392 - +# 2 Short offline Completed without error 00% 25368 - +# 3 Extended offline Completed without error 00% 25365 - +# 4 Short offline Completed without error 00% 25344 - +# 5 Short offline Completed without error 00% 25320 - +# 6 Short offline Completed without error 00% 25296 - +# 7 Short offline Completed without error 00% 25272 - +# 8 Short offline Completed without error 00% 25248 - +# 9 Extended offline Completed without error 00% 25245 - +#10 Short offline Completed without error 00% 25224 - +#11 Short offline Completed without error 00% 25200 - +#12 Short offline Completed without error 00% 25176 - +#13 Short offline Completed without error 00% 25152 - +#14 Short offline Completed without error 00% 25128 - +#15 Extended offline Completed without error 00% 25125 - +#16 Short offline Completed without error 00% 25104 - +#17 Short offline Completed without error 00% 25080 - +#18 Short offline Completed without error 00% 25056 - +#19 Short offline Completed without error 00% 25035 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 24/41 Celsius +Lifetime Min/Max Temperature: 18/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (22) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 92 --- Lifetime Power-On Resets +0x01 0x018 6 35077834063 --- Logical Sectors Written +0x01 0x020 6 560035420 --- Number of Write Commands +0x01 0x028 6 157026598558 --- Logical Sectors Read +0x01 0x030 6 983594242 --- Number of Read Commands +0x01 0x038 6 91487771250 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 17802 --- Spindle Motor Power-on Hours +0x03 0x010 4 17802 --- Head Flying Hours +0x03 0x018 4 45869 --- Head Load Events +0x03 0x020 4 39 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1925330 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 34 N-- Average Short Term Temperature +0x05 0x018 1 32 N-- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 50 N-- Highest Average Short Term Temperature +0x05 0x038 1 23 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6 --- Number of Hardware Resets +0x06 0x010 4 104 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/HGST/HUS728/HUS728T8TALE6L4/1933DC9506A5 b/HDD/HGST/HUS728/HUS728T8TALE6L4/1933DC9506A5 new file mode 100644 index 000000000..cc94ddbed --- /dev/null +++ b/HDD/HGST/HUS728/HUS728T8TALE6L4/1933DC9506A5 @@ -0,0 +1,216 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HGST HUS728T8TALE6L4 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: V8GNW460 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Nov 1 04:49:20 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 87) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 897) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 132 132 054 - 96 + 3 Spin_Up_Time POS--- 159 159 024 - 503 (Average 518) + 4 Start_Stop_Count -O--C- 100 100 000 - 16 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 100 100 000 - 5631 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 16 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 284 +193 Load_Cycle_Count -O--C- 100 100 000 - 284 +194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 25/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 36/43 Celsius +Lifetime Min/Max Temperature: 25/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (108) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 5631 --- Power-on Hours +0x01 0x018 6 2833702570 --- Logical Sectors Written +0x01 0x020 6 64567559 --- Number of Write Commands +0x01 0x028 6 169961560 --- Logical Sectors Read +0x01 0x030 6 3080318 --- Number of Read Commands +0x01 0x038 6 20274895750 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3510 --- Spindle Motor Power-on Hours +0x03 0x010 4 3510 --- Head Flying Hours +0x03 0x018 4 284 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 38 N-- Average Short Term Temperature +0x05 0x018 1 38 N-- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 50 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 45 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 70 --- Number of Hardware Resets +0x06 0x010 4 20 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HGST/HUS728/HUS728T8TALE6L4/AD4572A941FD b/HDD/HGST/HUS728/HUS728T8TALE6L4/AD4572A941FD new file mode 100644 index 000000000..76d37f129 --- /dev/null +++ b/HDD/HGST/HUS728/HUS728T8TALE6L4/AD4572A941FD @@ -0,0 +1,216 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HGST HUS728T8TALE6L4 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: V8GNW430 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Nov 1 04:49:21 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 87) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 842) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 133 133 054 - 92 + 3 Spin_Up_Time POS--- 157 157 024 - 522 (Average 513) + 4 Start_Stop_Count -O--C- 100 100 000 - 16 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 100 100 000 - 5561 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 16 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 270 +193 Load_Cycle_Count -O--C- 100 100 000 - 270 +194 Temperature_Celsius -O---- 162 162 000 - 37 (Min/Max 24/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 35/42 Celsius +Lifetime Min/Max Temperature: 24/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (122) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 5561 --- Power-on Hours +0x01 0x018 6 2813169978 --- Logical Sectors Written +0x01 0x020 6 63995291 --- Number of Write Commands +0x01 0x028 6 168369786 --- Logical Sectors Read +0x01 0x030 6 3073629 --- Number of Read Commands +0x01 0x038 6 20021092300 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3511 --- Spindle Motor Power-on Hours +0x03 0x010 4 3511 --- Head Flying Hours +0x03 0x018 4 270 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 37 N-- Average Short Term Temperature +0x05 0x018 1 37 N-- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 49 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 45 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 70 --- Number of Hardware Resets +0x06 0x010 4 20 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HPE/MB4000/MB4000GCWLV/90EFDF2427E9 b/HDD/HPE/MB4000/MB4000GCWLV/90EFDF2427E9 new file mode 100644 index 000000000..bdfae99b4 --- /dev/null +++ b/HDD/HPE/MB4000/MB4000GCWLV/90EFDF2427E9 @@ -0,0 +1,291 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MB4000GCWLV +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: HPG4 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 1 06:54:25 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 560) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 077 016 - 0 + 2 Throughput_Performance POS--K 137 100 054 - 77 + 3 Spin_Up_Time PO---K 217 100 024 - 328 (Average 385) + 4 Start_Stop_Count -O--CK 100 100 000 - 14 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-K 100 100 067 - 0 + 8 Seek_Time_Performance P-S--K 140 100 020 - 26 + 9 Power_On_Hours -O--CK 099 099 000 - 8792 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +180 Unknown_HDD_Attribute PO-R-K 100 100 098 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +185 Unknown_Attribute -O--CK 100 100 000 - 65535 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 055 000 - 41 (Min/Max 23/43) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 379 +193 Load_Cycle_Count -O--CK 100 100 000 - 379 +194 Temperature_Celsius -O---K 146 146 000 - 41 (Min/Max 19/45) +196 Reallocated_Event_Count PO--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb6 GPL VS 127 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 63 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 63 [2] occurred at disk power-on lifetime: 21674 hours (903 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 3d+22:31:14.751 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 3d+22:31:14.740 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 3d+22:31:14.730 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 3d+22:31:14.729 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 3d+22:31:14.727 IDENTIFY DEVICE + +Error 62 [1] occurred at disk power-on lifetime: 21674 hours (903 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 3d+22:31:14.740 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 3d+22:31:14.730 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 3d+22:31:14.729 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 3d+22:31:14.727 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 3d+22:31:14.726 IDENTIFY DEVICE + +Error 61 [0] occurred at disk power-on lifetime: 21674 hours (903 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 3d+22:31:14.730 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 3d+22:31:14.729 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 3d+22:31:14.727 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 3d+22:31:14.726 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 3d+22:31:14.724 IDENTIFY DEVICE + +Error 60 [3] occurred at disk power-on lifetime: 20285 hours (845 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 2d+04:27:05.987 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 2d+04:27:05.975 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 2d+04:27:05.966 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+04:27:05.964 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 2d+04:27:05.962 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 23/43 Celsius +Lifetime Min/Max Temperature: 19/45 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (76) + +SCT Error Recovery Control: + Read: 50 (5.0 seconds) + Write: 50 (5.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 4818614671 --- Logical Sectors Written +0x01 0x020 6 39420342 --- Number of Write Commands +0x01 0x028 6 36001139309 --- Logical Sectors Read +0x01 0x030 6 192151176 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8791 --- Spindle Motor Power-on Hours +0x03 0x010 4 8791 --- Head Flying Hours +0x03 0x018 4 379 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 772 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 40 N-- Average Short Term Temperature +0x05 0x018 1 40 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 42 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 24 --- Number of Hardware Resets +0x06 0x010 4 8 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HPE/MB4000/MB4000GCWLV/96396F74BA9A b/HDD/HPE/MB4000/MB4000GCWLV/96396F74BA9A new file mode 100644 index 000000000..1316d9fd6 --- /dev/null +++ b/HDD/HPE/MB4000/MB4000GCWLV/96396F74BA9A @@ -0,0 +1,289 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MB4000GCWLV +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: HPG4 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 1 06:54:31 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 544) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 095 016 - 0 + 2 Throughput_Performance POS--K 138 100 054 - 76 + 3 Spin_Up_Time PO---K 217 100 024 - 328 (Average 384) + 4 Start_Stop_Count -O--CK 100 100 000 - 14 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-K 100 100 067 - 0 + 8 Seek_Time_Performance P-S--K 140 100 020 - 26 + 9 Power_On_Hours -O--CK 099 099 000 - 8792 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +180 Unknown_HDD_Attribute PO-R-K 100 100 098 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +185 Unknown_Attribute -O--CK 100 100 000 - 65535 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 054 051 000 - 46 (Min/Max 24/48) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 378 +193 Load_Cycle_Count -O--CK 100 100 000 - 378 +194 Temperature_Celsius -O---K 130 130 000 - 46 (Min/Max 20/49) +196 Reallocated_Event_Count PO--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb6 GPL VS 127 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 86 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 86 [1] occurred at disk power-on lifetime: 21675 hours (903 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:48.573 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:48.561 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:48.551 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:48.550 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:48.548 IDENTIFY DEVICE + +Error 85 [0] occurred at disk power-on lifetime: 21675 hours (903 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:48.561 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:48.551 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:48.550 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:48.548 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:48.546 IDENTIFY DEVICE + +Error 84 [3] occurred at disk power-on lifetime: 21675 hours (903 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:48.551 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:48.550 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:48.548 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:48.546 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:48.544 IDENTIFY DEVICE + +Error 83 [2] occurred at disk power-on lifetime: 20293 hours (845 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 00:00:51.178 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 00:00:51.166 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 00:00:51.156 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:51.155 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:51.153 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 24/48 Celsius +Lifetime Min/Max Temperature: 20/49 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (94) + +SCT Error Recovery Control: + Read: 50 (5.0 seconds) + Write: 50 (5.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 4818145388 --- Logical Sectors Written +0x01 0x020 6 39337854 --- Number of Write Commands +0x01 0x028 6 35973255518 --- Logical Sectors Read +0x01 0x030 6 190108162 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8791 --- Spindle Motor Power-on Hours +0x03 0x010 4 8791 --- Head Flying Hours +0x03 0x018 4 378 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 16 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 46 --- Current Temperature +0x05 0x010 1 44 N-- Average Short Term Temperature +0x05 0x018 1 44 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 46 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 45 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 49 --- Number of Hardware Resets +0x06 0x010 4 7 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/HPE/MB4000/MB4000GCWLV/C09D53F3CF9F b/HDD/HPE/MB4000/MB4000GCWLV/C09D53F3CF9F new file mode 100644 index 000000000..362ddcd34 --- /dev/null +++ b/HDD/HPE/MB4000/MB4000GCWLV/C09D53F3CF9F @@ -0,0 +1,291 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MB4000GCWLV +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: HPG4 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 1 06:54:28 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 567) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 099 016 - 0 + 2 Throughput_Performance POS--K 138 100 054 - 75 + 3 Spin_Up_Time PO---K 218 100 024 - 328 (Average 382) + 4 Start_Stop_Count -O--CK 100 100 000 - 14 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-K 100 100 067 - 0 + 8 Seek_Time_Performance P-S--K 138 100 020 - 27 + 9 Power_On_Hours -O--CK 099 099 000 - 8792 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +180 Unknown_HDD_Attribute PO-R-K 100 100 098 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +185 Unknown_Attribute -O--CK 100 100 000 - 65535 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 058 054 000 - 42 (Min/Max 24/44) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 379 +193 Load_Cycle_Count -O--CK 100 100 000 - 379 +194 Temperature_Celsius -O---K 142 142 000 - 42 (Min/Max 19/46) +196 Reallocated_Event_Count PO--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb6 GPL VS 127 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 86 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 86 [1] occurred at disk power-on lifetime: 21675 hours (903 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:40.915 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:40.903 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:40.894 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:40.892 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:40.891 IDENTIFY DEVICE + +Error 85 [0] occurred at disk power-on lifetime: 21675 hours (903 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:40.903 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:40.894 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:40.892 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:40.891 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:40.889 IDENTIFY DEVICE + +Error 84 [3] occurred at disk power-on lifetime: 21675 hours (903 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:40.894 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:40.892 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:40.891 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:40.889 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:40.888 IDENTIFY DEVICE + +Error 83 [2] occurred at disk power-on lifetime: 20293 hours (845 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 00:00:49.267 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 00:00:49.255 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 00:00:49.245 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:49.244 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:49.242 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 24/44 Celsius +Lifetime Min/Max Temperature: 19/46 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (89) + +SCT Error Recovery Control: + Read: 50 (5.0 seconds) + Write: 50 (5.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 4823418037 --- Logical Sectors Written +0x01 0x020 6 40420076 --- Number of Write Commands +0x01 0x028 6 36133274230 --- Logical Sectors Read +0x01 0x030 6 199166370 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8791 --- Spindle Motor Power-on Hours +0x03 0x010 4 8791 --- Head Flying Hours +0x03 0x018 4 379 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 42 --- Current Temperature +0x05 0x010 1 42 N-- Average Short Term Temperature +0x05 0x018 1 41 N-- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 44 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 43 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 40 --- Number of Hardware Resets +0x06 0x010 4 8 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/HPE/MB4000/MB4000GCWLV/D679B81C7D9D b/HDD/HPE/MB4000/MB4000GCWLV/D679B81C7D9D new file mode 100644 index 000000000..ed6842742 --- /dev/null +++ b/HDD/HPE/MB4000/MB4000GCWLV/D679B81C7D9D @@ -0,0 +1,291 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MB4000GCWLV +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: HPG4 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 1 06:54:22 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 534) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 098 016 - 0 + 2 Throughput_Performance POS--K 138 100 054 - 75 + 3 Spin_Up_Time PO---K 218 100 024 - 325 (Average 383) + 4 Start_Stop_Count -O--CK 100 100 000 - 14 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-K 100 100 067 - 0 + 8 Seek_Time_Performance P-S--K 140 100 020 - 26 + 9 Power_On_Hours -O--CK 099 099 000 - 8792 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +180 Unknown_HDD_Attribute PO-R-K 100 100 098 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +185 Unknown_Attribute -O--CK 100 100 000 - 65535 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 054 050 000 - 46 (Min/Max 24/48) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 379 +193 Load_Cycle_Count -O--CK 100 100 000 - 379 +194 Temperature_Celsius -O---K 130 130 000 - 46 (Min/Max 20/50) +196 Reallocated_Event_Count PO--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb6 GPL VS 127 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 87 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 87 [2] occurred at disk power-on lifetime: 4868 hours (202 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 00 00 4d+01:54:18.375 FLUSH CACHE EXT + 61 00 02 00 10 00 01 d1 c0 bd 10 40 00 4d+01:54:18.375 WRITE FPDMA QUEUED + 61 00 02 00 00 00 01 d1 c0 bb 10 40 00 4d+01:54:18.375 WRITE FPDMA QUEUED + 61 00 02 00 08 00 00 00 00 03 10 40 00 4d+01:54:18.374 WRITE FPDMA QUEUED + 61 00 02 00 00 00 00 00 00 01 10 40 00 4d+01:54:18.374 WRITE FPDMA QUEUED + +Error 86 [1] occurred at disk power-on lifetime: 21675 hours (903 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:21.320 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:21.309 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:21.299 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:21.297 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:21.296 IDENTIFY DEVICE + +Error 85 [0] occurred at disk power-on lifetime: 21675 hours (903 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:21.309 READ LOG EXT + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:21.299 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:21.297 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:21.296 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:21.294 IDENTIFY DEVICE + +Error 84 [3] occurred at disk power-on lifetime: 21675 hours (903 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 d0 00 00 1d+10:52:21.299 READ LOG EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:21.297 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:21.296 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:21.294 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 1d+10:52:21.293 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 24/48 Celsius +Lifetime Min/Max Temperature: 20/50 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (81) + +SCT Error Recovery Control: + Read: 50 (5.0 seconds) + Write: 50 (5.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 4802898923 --- Logical Sectors Written +0x01 0x020 6 39491997 --- Number of Write Commands +0x01 0x028 6 31891301811 --- Logical Sectors Read +0x01 0x030 6 189487253 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8791 --- Spindle Motor Power-on Hours +0x03 0x010 4 8791 --- Head Flying Hours +0x03 0x018 4 379 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 37 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 46 --- Current Temperature +0x05 0x010 1 45 N-- Average Short Term Temperature +0x05 0x018 1 45 N-- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 47 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 47 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 16 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/DK23/DK23AA-12/B913A30B2069 b/HDD/Hitachi/DK23/DK23AA-12/B913A30B2069 new file mode 100644 index 000000000..5336b9115 --- /dev/null +++ b/HDD/Hitachi/DK23/DK23AA-12/B913A30B2069 @@ -0,0 +1,73 @@ +smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: HITACHI Travelstar DK23XX/DK23XXB +Device Model: DK23AA-12 +Serial Number: -- +Firmware Version: 00XDA0A2 +User Capacity: 12,072,517,632 bytes [12.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-5 T13/1321D revision 1 +Local Time is: Mon Oct 19 15:32:40 2020 +10 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1110) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 19) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000d 100 100 050 Pre-fail Offline - 0 + 4 Start_Stop_Count 0x0032 099 099 050 Old_age Always - 1240 + 5 Reallocated_Sector_Ct 0x0033 099 099 010 Pre-fail Always - 16 + 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 54 + 9 Power_On_Minutes 0x0032 097 097 060 Old_age Always - 103h+51m + 10 Spin_Retry_Count 0x0013 100 100 050 Pre-fail Always - 0 +196 Reallocated_Event_Count 0x0032 099 099 001 Old_age Always - 15 +197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 001 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 +221 G-Sense_Error_Rate 0x000a 100 100 050 Old_age Always - 1 +223 Load_Retry_Count 0x0012 100 100 050 Old_age Always - 7 +225 Load_Cycle_Count 0x0032 096 096 050 Old_age Always - 480247837287 +250 Read_Error_Retry_Rate 0x000a 100 095 050 Old_age Always - 182 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/HDD/Hitachi/HDP7250/HDP725016GLA380/6CF031CDD396 b/HDD/Hitachi/HDP7250/HDP725016GLA380/6CF031CDD396 new file mode 100644 index 000000000..2b799ce88 --- /dev/null +++ b/HDD/Hitachi/HDP7250/HDP725016GLA380/6CF031CDD396 @@ -0,0 +1,92 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar P7K500 +Device Model: HDP725016GLA380 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: GMBOA52A +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Oct 30 14:45:48 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 3936) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 65) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0 + 3 Spin_Up_Time 0x0007 113 113 024 Pre-fail Always - 186 (Average 176) + 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 482 + 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 125 + 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 43316 + 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 480 +192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2268 +193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 2268 +194 Temperature_Celsius 0x0002 127 127 000 Old_age Always - 47 (Min/Max 14/54) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 125 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Hitachi/HDS5/HDS5C3030ALA630/28E3F3F781A1 b/HDD/Hitachi/HDS5/HDS5C3030ALA630/28E3F3F781A1 new file mode 100644 index 000000000..d28618a8b --- /dev/null +++ b/HDD/Hitachi/HDS5/HDS5C3030ALA630/28E3F3F781A1 @@ -0,0 +1,254 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 5K3000 +Device Model: HDS5C3030ALA630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MEAOAA10 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5700 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:04:20 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 28) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 571) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 104 + 3 Spin_Up_Time POS--- 175 175 024 - 398 (Average 399) + 4 Start_Stop_Count -O--C- 100 100 000 - 29 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 36 + 9 Power_On_Hours -O--C- 100 100 000 - 6118 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 275 +193 Load_Cycle_Count -O--C- 100 100 000 - 275 +194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 19/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 42554 hours (1773 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 b1 00 01 47 f9 8b 4f 07 00 Error: ICRC, ABRT at LBA = 0x147f98b4f = 5502503759 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 00 00 01 47 f9 8b 00 40 00 5d+00:09:01.939 WRITE FPDMA QUEUED + 61 01 00 00 00 00 01 47 f9 8a 00 40 00 5d+00:09:01.930 WRITE FPDMA QUEUED + 61 01 00 00 00 00 01 47 f9 89 00 40 00 5d+00:09:01.273 WRITE FPDMA QUEUED + 61 00 08 00 00 00 01 00 63 3e f8 40 00 5d+00:08:59.881 WRITE FPDMA QUEUED + 61 00 08 00 00 00 01 00 58 ee 00 40 00 5d+00:08:59.874 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6116 - +# 2 Short offline Completed without error 00% 6092 - +# 3 Short offline Completed without error 00% 6068 - +# 4 Short offline Completed without error 00% 6044 - +# 5 Extended offline Completed without error 00% 6034 - +# 6 Short offline Completed without error 00% 6020 - +# 7 Short offline Completed without error 00% 5996 - +# 8 Short offline Completed without error 00% 5972 - +# 9 Short offline Completed without error 00% 5948 - +#10 Short offline Completed without error 00% 5924 - +#11 Short offline Completed without error 00% 5900 - +#12 Short offline Completed without error 00% 5876 - +#13 Extended offline Completed without error 00% 5866 - +#14 Short offline Completed without error 00% 5852 - +#15 Short offline Completed without error 00% 5828 - +#16 Short offline Completed without error 00% 5804 - +#17 Short offline Completed without error 00% 5780 - +#18 Short offline Completed without error 00% 5756 - +#19 Short offline Completed without error 00% 5732 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/39 Celsius +Lifetime Min/Max Temperature: 19/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (59) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 6118 --- Power-on Hours +0x01 0x018 6 7098476774 --- Logical Sectors Written +0x01 0x020 6 37797799 --- Number of Write Commands +0x01 0x028 6 11150398699 --- Logical Sectors Read +0x01 0x030 6 69318476 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6116 --- Spindle Motor Power-on Hours +0x03 0x010 4 6116 --- Head Flying Hours +0x03 0x018 4 275 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 N-- Average Short Term Temperature +0x05 0x018 1 32 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 37 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 953 --- Number of Hardware Resets +0x06 0x010 4 889 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 20 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HDS5/HDS5C3030ALA630/7226DEB63FB7 b/HDD/Hitachi/HDS5/HDS5C3030ALA630/7226DEB63FB7 new file mode 100644 index 000000000..f83fffd36 --- /dev/null +++ b/HDD/Hitachi/HDS5/HDS5C3030ALA630/7226DEB63FB7 @@ -0,0 +1,223 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 5K3000 +Device Model: HDS5C3030ALA630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MEAOAA10 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5700 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:04:11 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 28) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 601) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 134 134 054 - 112 + 3 Spin_Up_Time POS--- 171 171 024 - 415 (Average 403) + 4 Start_Stop_Count -O--C- 100 100 000 - 15 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 126 126 020 - 35 + 9 Power_On_Hours -O--C- 100 100 000 - 5582 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 15 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 246 +193 Load_Cycle_Count -O--C- 100 100 000 - 246 +194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 20/43) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5579 - +# 2 Short offline Completed without error 00% 5555 - +# 3 Short offline Completed without error 00% 5531 - +# 4 Short offline Completed without error 00% 5507 - +# 5 Extended offline Completed without error 00% 5498 - +# 6 Short offline Completed without error 00% 5483 - +# 7 Short offline Completed without error 00% 5459 - +# 8 Short offline Completed without error 00% 5435 - +# 9 Short offline Completed without error 00% 5411 - +#10 Short offline Completed without error 00% 5387 - +#11 Short offline Completed without error 00% 5363 - +#12 Short offline Completed without error 00% 5339 - +#13 Extended offline Completed without error 00% 5330 - +#14 Short offline Completed without error 00% 5315 - +#15 Short offline Completed without error 00% 5291 - +#16 Short offline Completed without error 00% 5267 - +#17 Short offline Completed without error 00% 5243 - +#18 Short offline Completed without error 00% 5219 - +#19 Short offline Completed without error 00% 5195 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 27/37 Celsius +Lifetime Min/Max Temperature: 20/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (72) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 5582 --- Power-on Hours +0x01 0x018 6 6402725760 --- Logical Sectors Written +0x01 0x020 6 33762621 --- Number of Write Commands +0x01 0x028 6 8551069312 --- Logical Sectors Read +0x01 0x030 6 49910843 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5580 --- Spindle Motor Power-on Hours +0x03 0x010 4 5580 --- Head Flying Hours +0x03 0x018 4 246 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 31 N-- Average Short Term Temperature +0x05 0x018 1 31 N-- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 39 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 35 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 424 --- Number of Hardware Resets +0x06 0x010 4 408 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 20 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HDS5/HDS5C3030ALA630/7D1C53E9B7BB b/HDD/Hitachi/HDS5/HDS5C3030ALA630/7D1C53E9B7BB new file mode 100644 index 000000000..2623aba2a --- /dev/null +++ b/HDD/Hitachi/HDS5/HDS5C3030ALA630/7D1C53E9B7BB @@ -0,0 +1,252 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 5K3000 +Device Model: HDS5C3030ALA630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MEAOAA10 +User Capacity: 3,000,591,900,160 bytes [3.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5700 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:04:23 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 28) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 596) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 101 + 3 Spin_Up_Time POS--- 178 178 024 - 390 (Average 395) + 4 Start_Stop_Count -O--C- 100 100 000 - 29 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 36 + 9 Power_On_Hours -O--C- 100 100 000 - 6118 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 267 +193 Load_Cycle_Count -O--C- 100 100 000 - 267 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 19/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 35639 hours (1484 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 21 00 01 46 d5 b0 df 06 00 Error: ICRC, ABRT at LBA = 0x146d5b0df = 5483376863 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 08 00 01 46 d5 b0 00 40 00 5d+18:15:34.993 WRITE FPDMA QUEUED + 60 00 08 00 00 00 01 2f 37 49 80 40 00 5d+18:15:34.987 READ FPDMA QUEUED + 61 01 00 00 00 00 01 26 67 3b 00 40 00 5d+18:15:34.974 WRITE FPDMA QUEUED + 61 01 00 00 00 00 01 26 67 37 00 40 00 5d+18:15:34.936 WRITE FPDMA QUEUED + 61 00 08 00 00 00 01 46 ae c9 40 40 00 5d+18:15:34.931 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6116 - +# 2 Short offline Completed without error 00% 6092 - +# 3 Short offline Completed without error 00% 6068 - +# 4 Short offline Completed without error 00% 6044 - +# 5 Extended offline Completed without error 00% 6034 - +# 6 Short offline Completed without error 00% 6020 - +# 7 Short offline Completed without error 00% 5996 - +# 8 Short offline Completed without error 00% 5972 - +# 9 Short offline Completed without error 00% 5948 - +#10 Short offline Completed without error 00% 5924 - +#11 Short offline Completed without error 00% 5900 - +#12 Short offline Completed without error 00% 5876 - +#13 Extended offline Completed without error 00% 5866 - +#14 Short offline Completed without error 00% 5852 - +#15 Short offline Completed without error 00% 5828 - +#16 Short offline Completed without error 00% 5804 - +#17 Short offline Completed without error 00% 5780 - +#18 Short offline Completed without error 00% 5756 - +#19 Short offline Completed without error 00% 5732 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 29/39 Celsius +Lifetime Min/Max Temperature: 19/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (57) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 6118 --- Power-on Hours +0x01 0x018 6 9260097694 --- Logical Sectors Written +0x01 0x020 6 48479337 --- Number of Write Commands +0x01 0x028 6 12112084103 --- Logical Sectors Read +0x01 0x030 6 73162210 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6116 --- Spindle Motor Power-on Hours +0x03 0x010 4 6116 --- Head Flying Hours +0x03 0x018 4 267 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 5 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 32 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 37 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 952 --- Number of Hardware Resets +0x06 0x010 4 889 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 20 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HDS5/HDS5C3030ALA630/898281C2A066 b/HDD/Hitachi/HDS5/HDS5C3030ALA630/898281C2A066 new file mode 100644 index 000000000..37337f178 --- /dev/null +++ b/HDD/Hitachi/HDS5/HDS5C3030ALA630/898281C2A066 @@ -0,0 +1,223 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 5K3000 +Device Model: HDS5C3030ALA630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MEAOA800 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5700 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:04:14 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x85) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (35768) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 596) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 134 134 054 - 111 + 3 Spin_Up_Time POS--- 179 179 024 - 415 (Average 365) + 4 Start_Stop_Count -O--C- 100 100 000 - 23 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 36 + 9 Power_On_Hours -O--C- 100 100 000 - 5959 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 22 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 241 +193 Load_Cycle_Count -O--C- 100 100 000 - 241 +194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 19/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5957 - +# 2 Short offline Completed without error 00% 5933 - +# 3 Short offline Completed without error 00% 5909 - +# 4 Short offline Completed without error 00% 5885 - +# 5 Extended offline Completed without error 00% 5875 - +# 6 Short offline Completed without error 00% 5861 - +# 7 Short offline Completed without error 00% 5837 - +# 8 Short offline Completed without error 00% 5813 - +# 9 Short offline Completed without error 00% 5789 - +#10 Short offline Completed without error 00% 5765 - +#11 Short offline Completed without error 00% 5741 - +#12 Short offline Completed without error 00% 5717 - +#13 Extended offline Completed without error 00% 5707 - +#14 Short offline Completed without error 00% 5693 - +#15 Short offline Completed without error 00% 5669 - +#16 Short offline Completed without error 00% 5645 - +#17 Short offline Completed without error 00% 5621 - +#18 Short offline Completed without error 00% 5597 - +#19 Short offline Completed without error 00% 5573 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 30/42 Celsius +Lifetime Min/Max Temperature: 19/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (40) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 5959 --- Power-on Hours +0x01 0x018 6 6564485350 --- Logical Sectors Written +0x01 0x020 6 34046721 --- Number of Write Commands +0x01 0x028 6 10586378489 --- Logical Sectors Read +0x01 0x030 6 62691012 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5958 --- Spindle Motor Power-on Hours +0x03 0x010 4 5958 --- Head Flying Hours +0x03 0x018 4 241 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 35 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 41 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 38 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 722 --- Number of Hardware Resets +0x06 0x010 4 679 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 20 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HDS5/HDS5C3030ALA630/CF382533E4BD b/HDD/Hitachi/HDS5/HDS5C3030ALA630/CF382533E4BD new file mode 100644 index 000000000..d71766abe --- /dev/null +++ b/HDD/Hitachi/HDS5/HDS5C3030ALA630/CF382533E4BD @@ -0,0 +1,305 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 5K3000 +Device Model: HDS5C3030ALA630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MEAOAA10 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5700 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:04:17 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 28) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 581) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 103 + 3 Spin_Up_Time POS--- 180 180 024 - 411 (Average 363) + 4 Start_Stop_Count -O--C- 100 100 000 - 23 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 8 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 36 + 9 Power_On_Hours -O--C- 100 100 000 - 5959 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 22 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 260 +193 Load_Cycle_Count -O--C- 100 100 000 - 260 +194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 19/43) +196 Reallocated_Event_Count -O--CK 100 100 000 - 8 +197 Current_Pending_Sector -O---K 100 100 000 - 3 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 35 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 35 [2] occurred at disk power-on lifetime: 200 hours (8 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 0b 00 00 b4 1d af 25 04 00 Error: UNC at LBA = 0xb41daf25 = 3021844261 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 80 00 01 5d 50 a0 10 40 00 2d+05:02:08.567 READ FPDMA QUEUED + 60 00 10 00 78 00 01 5d 50 9e 10 40 00 2d+05:02:08.567 READ FPDMA QUEUED + 60 00 10 00 70 00 00 00 00 02 10 40 00 2d+05:02:08.567 READ FPDMA QUEUED + 60 00 e8 00 68 00 00 b4 1d b0 30 40 00 2d+05:02:08.567 READ FPDMA QUEUED + 60 01 00 00 60 00 00 b4 1d af 30 40 00 2d+05:02:08.567 READ FPDMA QUEUED + +Error 34 [1] occurred at disk power-on lifetime: 200 hours (8 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 0b 00 00 b4 1d af 25 04 00 Error: UNC at LBA = 0xb41daf25 = 3021844261 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 48 00 01 5d 50 a0 10 40 00 2d+05:02:04.498 READ FPDMA QUEUED + 60 00 10 00 40 00 01 5d 50 9e 10 40 00 2d+05:02:04.498 READ FPDMA QUEUED + 60 00 10 00 38 00 00 00 00 02 10 40 00 2d+05:02:04.498 READ FPDMA QUEUED + 60 00 e8 00 30 00 00 b4 1d b0 30 40 00 2d+05:02:04.498 READ FPDMA QUEUED + 60 01 00 00 28 00 00 b4 1d af 30 40 00 2d+05:02:04.497 READ FPDMA QUEUED + +Error 33 [0] occurred at disk power-on lifetime: 200 hours (8 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 0b 00 00 b4 1d af 25 04 00 Error: UNC at LBA = 0xb41daf25 = 3021844261 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 10 00 01 5d 50 a0 10 40 00 2d+05:02:00.429 READ FPDMA QUEUED + 60 00 10 00 08 00 01 5d 50 9e 10 40 00 2d+05:02:00.429 READ FPDMA QUEUED + 60 00 10 00 00 00 00 00 00 02 10 40 00 2d+05:02:00.429 READ FPDMA QUEUED + 60 00 e8 00 f8 00 00 b4 1d b0 30 40 00 2d+05:02:00.428 READ FPDMA QUEUED + 60 01 00 00 f0 00 00 b4 1d af 30 40 00 2d+05:02:00.428 READ FPDMA QUEUED + +Error 32 [3] occurred at disk power-on lifetime: 200 hours (8 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 0b 00 00 b4 1d af 25 04 00 Error: UNC at LBA = 0xb41daf25 = 3021844261 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 d8 00 01 5d 50 a0 10 40 00 2d+05:01:56.359 READ FPDMA QUEUED + 60 00 10 00 d0 00 01 5d 50 9e 10 40 00 2d+05:01:56.359 READ FPDMA QUEUED + 60 00 10 00 c8 00 00 00 00 02 10 40 00 2d+05:01:56.359 READ FPDMA QUEUED + 60 00 e8 00 c0 00 00 b4 1d b0 30 40 00 2d+05:01:56.359 READ FPDMA QUEUED + 60 01 00 00 b8 00 00 b4 1d af 30 40 00 2d+05:01:56.359 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5957 - +# 2 Short offline Completed without error 00% 5933 - +# 3 Short offline Completed without error 00% 5909 - +# 4 Short offline Completed without error 00% 5885 - +# 5 Extended offline Completed without error 00% 5874 - +# 6 Short offline Completed without error 00% 5861 - +# 7 Short offline Completed without error 00% 5837 - +# 8 Short offline Completed without error 00% 5813 - +# 9 Short offline Completed without error 00% 5789 - +#10 Short offline Completed without error 00% 5765 - +#11 Short offline Completed without error 00% 5741 - +#12 Short offline Completed without error 00% 5717 - +#13 Extended offline Completed without error 00% 5706 - +#14 Short offline Completed without error 00% 5693 - +#15 Short offline Completed without error 00% 5669 - +#16 Short offline Completed without error 00% 5645 - +#17 Short offline Completed without error 00% 5621 - +#18 Short offline Completed without error 00% 5597 - +#19 Short offline Completed without error 00% 5573 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 27/37 Celsius +Lifetime Min/Max Temperature: 19/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (23) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 5959 --- Power-on Hours +0x01 0x018 6 6574461027 --- Logical Sectors Written +0x01 0x020 6 35024070 --- Number of Write Commands +0x01 0x028 6 10643628813 --- Logical Sectors Read +0x01 0x030 6 67040294 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5957 --- Spindle Motor Power-on Hours +0x03 0x010 4 5957 --- Head Flying Hours +0x03 0x018 4 260 --- Head Load Events +0x03 0x020 4 8 --- Number of Reallocated Logical Sectors +0x03 0x028 4 39 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 35 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 31 N-- Average Short Term Temperature +0x05 0x018 1 31 N-- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 39 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 717 --- Number of Hardware Resets +0x06 0x010 4 674 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 20 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HDS7210/HDS721010CLA630/C17D310109A8 b/HDD/Hitachi/HDS7210/HDS721010CLA630/C17D310109A8 new file mode 100644 index 000000000..3bf2746ff --- /dev/null +++ b/HDD/Hitachi/HDS7210/HDS721010CLA630/C17D310109A8 @@ -0,0 +1,207 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 7K1000.C +Device Model: HDS721010CLA630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: JP4OA41A +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 5 15:16:22 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10047) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 167) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 074 016 - 0 + 2 Throughput_Performance POS--K 136 100 054 - 94 + 3 Spin_Up_Time PO---K 128 100 024 - 298 (Average 294) + 4 Start_Stop_Count -O---K 100 100 000 - 3475 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 1 (0 1) + 7 Seek_Error_Rate POSR-K 100 100 067 - 0 + 8 Seek_Time_Performance P-S--K 140 100 020 - 30 + 9 Power_On_Hours -O--CK 098 098 000 - 16279 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3166 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +185 Unknown_Attribute -O--CK 100 100 000 - 65535 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 086 000 - 88283208 +189 High_Fly_Writes -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 062 051 000 - 38 (Min/Max 25/38) +192 Power-Off_Retract_Count -O--CK 098 098 000 - 3495 +193 Load_Cycle_Count -O--CK 098 098 000 - 3495 +194 Temperature_Celsius -O---- 157 122 000 - 38 (Min/Max 9/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 1 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 90% 10 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 25/38 Celsius +Lifetime Min/Max Temperature: 9/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (2) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3166 --- Lifetime Power-On Resets +0x01 0x010 4 16279 --- Power-on Hours +0x01 0x018 6 88556764840 --- Logical Sectors Written +0x01 0x020 6 1232009108 --- Number of Write Commands +0x01 0x028 6 225089853726 --- Logical Sectors Read +0x01 0x030 6 1253800536 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 15768 --- Spindle Motor Power-on Hours +0x03 0x010 4 15768 --- Head Flying Hours +0x03 0x018 4 3495 --- Head Load Events +0x03 0x020 4 1 --- Number of Reallocated Logical Sectors +0x03 0x028 4 74 --- Read Recovery Attempts +0x03 0x030 4 4294967295 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6216 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 36 N-- Average Short Term Temperature +0x05 0x018 1 35 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 44 N-- Highest Average Short Term Temperature +0x05 0x038 1 0 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 0 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 15203 --- Number of Hardware Resets +0x06 0x010 4 6778 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HDS7210/HDS721010KLA330/59FE501A8E0C b/HDD/Hitachi/HDS7210/HDS721010KLA330/59FE501A8E0C new file mode 100644 index 000000000..18561bb08 --- /dev/null +++ b/HDD/Hitachi/HDS7210/HDS721010KLA330/59FE501A8E0C @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 7K1000 +Device Model: HDS721010KLA330 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: GK02A96A +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Fri Oct 30 07:09:16 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (15354) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 255) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 100 100 054 - 0 + 3 Spin_Up_Time POS--- 104 104 024 - 670 (Average 670) + 4 Start_Stop_Count -O--C- 100 100 000 - 326 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 020 - 0 + 9 Power_On_Hours -O--C- 088 088 000 - 86642 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 310 +192 Power-Off_Retract_Count -O--CK 097 097 000 - 3931 +193 Load_Cycle_Count -O--C- 097 097 000 - 3931 +194 Temperature_Celsius -O---- 153 153 000 - 39 (Min/Max 8/58) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 20566 hours (856 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 48 00 00 42 5b 3f df 42 00 Error: UNC 72 sectors at LBA = 0x425b3fdf = 1113276383 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 58 00 00 42 5b 3f d0 40 00 23d+06:12:26.800 READ DMA EXT + 35 00 00 01 00 00 00 42 7a bb e8 40 00 23d+06:12:26.800 WRITE DMA EXT + 35 00 00 01 00 00 00 42 7a ba e8 40 00 23d+06:12:26.800 WRITE DMA EXT + 35 00 00 01 00 00 00 42 7a b8 c8 40 00 23d+06:12:26.800 WRITE DMA EXT + 35 00 00 01 00 00 00 42 7a b7 c8 40 00 23d+06:12:26.800 WRITE DMA EXT + +Error 1 [0] occurred at disk power-on lifetime: 16784 hours (699 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 30 5d 6c 2f 40 00 Error: UNC at LBA = 0x305d6c2f = 811428911 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 30 5d 6c 28 40 00 21d+20:24:44.024 READ DMA EXT + 25 00 00 01 18 00 00 30 46 7a 50 40 00 21d+20:24:44.024 READ DMA EXT + 25 00 00 00 08 00 00 30 5d 6c a8 40 00 21d+20:24:44.024 READ DMA EXT + 25 00 00 00 08 00 00 30 5d 6d 28 40 00 21d+20:24:43.924 READ DMA EXT + 25 00 00 01 38 00 00 30 46 79 08 40 00 21d+20:24:43.924 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 14027 - +# 2 Short offline Completed without error 00% 1132 - +# 3 Short offline Completed without error 00% 1117 - +# 4 Short offline Completed without error 00% 1101 - +# 5 Short offline Completed without error 00% 63698 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: --/47 Celsius +Lifetime Min/Max Temperature: --/58 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (12) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HDS7210/HDS721032CLA362/86783E73E8D8 b/HDD/Hitachi/HDS7210/HDS721032CLA362/86783E73E8D8 new file mode 100644 index 000000000..bd796d626 --- /dev/null +++ b/HDD/Hitachi/HDS7210/HDS721032CLA362/86783E73E8D8 @@ -0,0 +1,280 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 7K1000.C +Device Model: HDS721032CLA362 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: JPFOA39C +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Aug 19 21:10:03 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 128 +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4951) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 82) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 119 119 054 - 158 + 3 Spin_Up_Time POS--- 118 118 024 - 193 (Average 194) + 4 Start_Stop_Count -O--C- 098 098 000 - 9728 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 134 134 020 - 33 + 9 Power_On_Hours -O--C- 096 096 000 - 31765 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 6414 +192 Power-Off_Retract_Count -O--CK 092 092 000 - 9929 +193 Load_Cycle_Count -O--C- 092 092 000 - 9929 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 11/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 82 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 95 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 95 [2] occurred at disk power-on lifetime: 6438 hours (268 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 59 00 00 00 00 00 00 00 01 00 00 Error: ABRT at LBA = 0x00000001 = 1 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 29 00 00 00 01 00 00 00 00 00 00 e0 08 46d+17:47:31.625 READ MULTIPLE EXT + c6 00 00 00 10 00 00 00 00 00 00 e0 08 46d+17:47:31.622 SET MULTIPLE MODE + 91 00 00 00 3f 00 00 00 00 00 00 ef 08 46d+17:47:31.621 INITIALIZE DEVICE PARAMETERS [OBS-6] + 10 00 00 01 00 00 00 01 00 00 00 e0 08 46d+17:47:31.609 RECALIBRATE [OBS-4] + 29 00 00 00 01 00 00 00 00 00 00 a0 04 46d+17:47:31.572 READ MULTIPLE EXT + +Error 94 [1] occurred at disk power-on lifetime: 6379 hours (265 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 59 00 00 00 00 00 01 12 aa 00 00 Error: ABRT at LBA = 0x000112aa = 70314 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 29 00 00 00 01 00 00 00 01 12 a9 e0 08 31d+18:48:16.317 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 01 12 a8 e0 08 31d+18:48:15.654 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 01 12 a9 e0 08 31d+18:48:15.651 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 01 12 a8 e0 08 31d+18:48:15.561 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 00 08 0f e0 08 31d+18:48:14.943 READ MULTIPLE EXT + +Error 93 [0] occurred at disk power-on lifetime: 6379 hours (265 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 59 00 00 00 00 00 01 12 a9 00 00 Error: ABRT at LBA = 0x000112a9 = 70313 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 29 00 00 00 01 00 00 00 01 12 a8 e0 08 31d+18:48:15.654 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 01 12 a9 e0 08 31d+18:48:15.651 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 01 12 a8 e0 08 31d+18:48:15.561 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 00 08 0f e0 08 31d+18:48:14.943 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 00 08 0e e0 08 31d+18:48:14.152 READ MULTIPLE EXT + +Error 92 [3] occurred at disk power-on lifetime: 6379 hours (265 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 59 00 00 00 00 00 00 08 10 00 00 Error: ABRT at LBA = 0x00000810 = 2064 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 29 00 00 00 01 00 00 00 00 08 0f e0 08 31d+18:48:14.943 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 00 08 0e e0 08 31d+18:48:14.152 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 00 08 0d e0 08 31d+18:48:13.536 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 00 08 0c e0 08 31d+18:48:13.532 READ MULTIPLE EXT + 29 00 00 00 01 00 00 00 00 08 0b e0 08 31d+18:48:13.529 READ MULTIPLE EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 26615 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 32/33 Celsius +Lifetime Min/Max Temperature: 11/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (75) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6414 --- Lifetime Power-On Resets +0x01 0x010 4 31765 --- Power-on Hours +0x01 0x018 6 24321445082 --- Logical Sectors Written +0x01 0x020 6 337716776 --- Number of Write Commands +0x01 0x028 6 478763460371 --- Logical Sectors Read +0x01 0x030 6 356342739 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 28785 --- Spindle Motor Power-on Hours +0x03 0x010 4 28784 --- Head Flying Hours +0x03 0x018 4 9929 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 9 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 7929 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 32 N-- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 11 --- Lowest Temperature +0x05 0x030 1 44 N-- Highest Average Short Term Temperature +0x05 0x038 1 0 N-- Lowest Average Short Term Temperature +0x05 0x040 1 41 N-- Highest Average Long Term Temperature +0x05 0x048 1 0 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 834239 --- Number of Hardware Resets +0x06 0x010 4 13607 --- Number of ASR Events +0x06 0x018 4 82 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HDS7230/HDS723020BLA642/CE61031CC319 b/HDD/Hitachi/HDS7230/HDS723020BLA642/CE61031CC319 new file mode 100644 index 000000000..21a4eed62 --- /dev/null +++ b/HDD/Hitachi/HDS7230/HDS723020BLA642/CE61031CC319 @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 7K3000 +Device Model: HDS723020BLA642 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MN6OA5C0 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 26 06:24:54 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (19665) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 328) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 134 134 054 - 89 + 3 Spin_Up_Time POS--- 178 178 024 - 293 (Average 350) + 4 Start_Stop_Count -O--C- 100 100 000 - 230 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 138 138 020 - 25 + 9 Power_On_Hours -O--C- 097 097 000 - 24188 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 228 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 652 +193 Load_Cycle_Count -O--C- 100 100 000 - 652 +194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 21/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 1 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 35/49 Celsius +Lifetime Min/Max Temperature: 21/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (24) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 228 --- Lifetime Power-On Resets +0x01 0x010 4 24188 --- Power-on Hours +0x01 0x018 6 24570536369 --- Logical Sectors Written +0x01 0x020 6 94162083 --- Number of Write Commands +0x01 0x028 6 2314009742191 --- Logical Sectors Read +0x01 0x030 6 404628972 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 24181 --- Spindle Motor Power-on Hours +0x03 0x010 4 24181 --- Head Flying Hours +0x03 0x018 4 652 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 4 --- Read Recovery Attempts +0x03 0x030 4 20 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 25 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 41 N-- Average Short Term Temperature +0x05 0x018 1 42 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 47 N-- Highest Average Short Term Temperature +0x05 0x038 1 23 N-- Lowest Average Short Term Temperature +0x05 0x040 1 42 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 28703 --- Number of Hardware Resets +0x06 0x010 4 9322 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 18 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HDS7230/HDS723030ALA640/6B0C00969243 b/HDD/Hitachi/HDS7230/HDS723030ALA640/6B0C00969243 new file mode 100644 index 000000000..5cfe452f0 --- /dev/null +++ b/HDD/Hitachi/HDS7230/HDS723030ALA640/6B0C00969243 @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE-20200612 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 7K3000 +Device Model: HDS723030ALA640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MKAOA3B0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 17 19:47:42 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (28319) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 472) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 135 135 054 - 86 + 3 Spin_Up_Time POS--- 125 125 024 - 615 (Average 617) + 4 Start_Stop_Count -O--C- 100 100 000 - 516 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 133 133 020 - 27 + 9 Power_On_Hours -O--C- 098 098 000 - 19887 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 508 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 987 +193 Load_Cycle_Count -O--C- 100 100 000 - 987 +194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 17/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 1 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 24/44 Celsius +Lifetime Min/Max Temperature: 17/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (78) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 508 --- Lifetime Power-On Resets +0x01 0x010 4 19887 --- Power-on Hours +0x01 0x018 6 55832955518 --- Logical Sectors Written +0x01 0x020 6 278727983 --- Number of Write Commands +0x01 0x028 6 3158114244648 --- Logical Sectors Read +0x01 0x030 6 364977166 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 19881 --- Spindle Motor Power-on Hours +0x03 0x010 4 19881 --- Head Flying Hours +0x03 0x018 4 987 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 133 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 266 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 41 N-- Average Short Term Temperature +0x05 0x018 1 40 N-- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 51 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 42 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3124 --- Number of Hardware Resets +0x06 0x010 4 1407 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HDS7280/HDS728080PLA380/BBB18F2B4E01 b/HDD/Hitachi/HDS7280/HDS728080PLA380/BBB18F2B4E01 new file mode 100644 index 000000000..1aa31c02d --- /dev/null +++ b/HDD/Hitachi/HDS7280/HDS728080PLA380/BBB18F2B4E01 @@ -0,0 +1,182 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE-p11 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 7K80 +Device Model: HDS728080PLA380 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: PF2OA6EA +User Capacity: 82,347,195,904 bytes [82.3 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Thu Aug 6 09:23:27 2020 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1828) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 31) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 105 105 024 - 191 (Average 188) + 4 Start_Stop_Count -O--C- 100 100 000 - 2595 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 020 - 0 + 9 Power_On_Hours -O--C- 093 093 000 - 50087 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2153 +192 Power-Off_Retract_Count -O--CK 097 097 050 - 4359 +193 Load_Cycle_Count -O--C- 097 097 050 - 4359 +194 Temperature_Celsius -O---- 144 144 000 - 38 (Min/Max -8/65) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 3 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] occurred at disk power-on lifetime: 30630 hours (1276 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 51 00 00 00 00 00 c2 4f 01 a0 00 Error: + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d8 00 00 00 00 00 c2 4f 01 a0 00 00:00:12.800 SMART ENABLE OPERATIONS + ec 20 00 01 00 00 00 00 00 00 01 a0 00 00:00:12.800 IDENTIFY DEVICE + 10 00 20 01 00 00 00 0f 00 00 01 a0 00 00:00:12.700 RECALIBRATE [OBS-4] + 91 00 20 01 00 00 00 00 00 00 01 af 00 00:00:12.700 INITIALIZE DEVICE PARAMETERS [OBS-6] + ec 00 00 00 01 00 00 00 00 00 01 a0 00 00:00:12.700 IDENTIFY DEVICE + +Error 2 [1] occurred at disk power-on lifetime: 30630 hours (1276 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 00 00 00 01 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 01 00 00 00 00 00 01 a0 00 00:00:12.700 IDENTIFY DEVICE + ec 00 00 00 01 00 00 00 00 00 01 a0 00 00:00:12.500 IDENTIFY DEVICE + +Error 1 [0] occurred at disk power-on lifetime: 30630 hours (1276 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 00 00 00 01 a0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 01 00 00 00 00 00 01 a0 00 00:00:12.500 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 10749 - + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/HDD/Hitachi/HDT7210/HDT721010SLA360/B4DEF547738D b/HDD/Hitachi/HDT7210/HDT721010SLA360/B4DEF547738D new file mode 100644 index 000000000..78b243c7d --- /dev/null +++ b/HDD/Hitachi/HDT7210/HDT721010SLA360/B4DEF547738D @@ -0,0 +1,156 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 7K1000.B +Device Model: HDT721010SLA360 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: ST6OA31B +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Aug 19 14:11:13 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (14090) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 235) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 132 132 054 - 112 + 3 Spin_Up_Time POS--- 140 140 024 - 427 (Average 393) + 4 Start_Stop_Count -O--C- 099 099 000 - 6569 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 123 123 020 - 34 + 9 Power_On_Hours -O--C- 088 088 000 - 90785 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1116 +192 Power-Off_Retract_Count -O--CK 092 092 000 - 9796 +193 Load_Cycle_Count -O--C- 092 092 000 - 9796 +194 Temperature_Celsius -O---- 130 130 000 - 46 (Min/Max 13/59) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 62031 - +# 2 Short offline Completed without error 00% 47825 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 31/48 Celsius +Lifetime Min/Max Temperature: 13/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (114) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HDT7210/HDT721032SLA360/453F0C24093C b/HDD/Hitachi/HDT7210/HDT721032SLA360/453F0C24093C new file mode 100644 index 000000000..b63942efa --- /dev/null +++ b/HDD/Hitachi/HDT7210/HDT721032SLA360/453F0C24093C @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar 7K1000.B +Device Model: HDT721032SLA360 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: ST2OA3AA +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Oct 2 08:03:34 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 128 +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4710) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 79) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 131 131 054 - 117 + 3 Spin_Up_Time POS--- 119 119 024 - 216 (Average 202) + 4 Start_Stop_Count -O--C- 100 100 000 - 350 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 020 - 56 + 9 Power_On_Hours -O--C- 088 088 000 - 84817 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 333 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1210 +193 Load_Cycle_Count -O--C- 099 099 000 - 1210 +194 Temperature_Celsius -O---- 200 200 000 - 30 (Min/Max 17/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] occurred at disk power-on lifetime: 19267 hours (802 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 25 42 ea af e5 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 37 da ff 00 01 00 00 25 42 ea af e5 00 00:07:22.800 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 da ff 01 00 00 00 00 c2 4f ff e0 00 00:07:22.800 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + b0 ff da 46 00 c2 4f ff c2 4f ff e0 00 00:07:22.600 SMART RETURN STATUS + ef ff 03 0c 46 c2 4f ff c2 4f ff e0 00 00:07:20.300 SET FEATURES [Set transfer mode] + ef ff 03 f1 0c c2 4f ff c2 4f ff e0 00 00:07:20.300 SET FEATURES [Set transfer mode] + +Error 2 [1] occurred at disk power-on lifetime: 19267 hours (802 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 25 42 ea af e5 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 37 da ff 00 01 00 00 25 42 ea af e5 00 00:06:30.600 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 da ff 01 00 00 00 00 c2 4f ff e0 00 00:06:30.600 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + b0 ff da 46 00 c2 4f ff c2 4f ff e0 00 00:06:30.400 SMART RETURN STATUS + ef ff 03 0c 46 c2 4f ff c2 4f ff e0 00 00:06:28.100 SET FEATURES [Set transfer mode] + ef ff 03 f1 0c c2 4f ff c2 4f ff e0 00 00:06:28.100 SET FEATURES [Set transfer mode] + +Error 1 [0] occurred at disk power-on lifetime: 19267 hours (802 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 25 42 ea af e5 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 37 da ff 00 01 00 00 25 42 ea af e5 00 00:01:20.100 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 da ff 01 00 00 00 00 c2 4f ff e0 00 00:01:20.100 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + b0 ff da 46 00 c2 4f ff c2 4f ff e0 00 00:01:19.900 SMART RETURN STATUS + ef ff 03 0c 46 c2 4f ff c2 4f ff e0 00 00:01:17.500 SET FEATURES [Set transfer mode] + ef ff 03 f1 0c c2 4f ff c2 4f ff e0 00 00:01:17.500 SET FEATURES [Set transfer mode] + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 19274 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/31 Celsius +Lifetime Min/Max Temperature: 17/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (34) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HDT7250/HDT725032VLA380/C9510D587867 b/HDD/Hitachi/HDT7250/HDT725032VLA380/C9510D587867 new file mode 100644 index 000000000..40fac19df --- /dev/null +++ b/HDD/Hitachi/HDT7250/HDT725032VLA380/C9510D587867 @@ -0,0 +1,151 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Deskstar T7K500 +Device Model: HDT725032VLA380 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: V54OA52A +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Tue Oct 27 20:40:53 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5601) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 94) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 140 140 024 - 268 (Average 266) + 4 Start_Stop_Count -O--C- 100 100 000 - 2571 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 020 - 0 + 9 Power_On_Hours -O--C- 099 099 000 - 9355 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2533 +192 Power-Off_Retract_Count -O--CK 098 098 000 - 2813 +193 Load_Cycle_Count -O--C- 098 098 000 - 2813 +194 Temperature_Celsius -O---- 153 153 000 - 39 (Min/Max 12/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: --/42 Celsius +Lifetime Min/Max Temperature: --/48 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (60) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTE7232/HTE723225A7A364/82476FAA1699 b/HDD/Hitachi/HTE7232/HTE723225A7A364/82476FAA1699 new file mode 100644 index 000000000..486884b8e --- /dev/null +++ b/HDD/Hitachi/HTE7232/HTE723225A7A364/82476FAA1699 @@ -0,0 +1,98 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HTE723225A7A364 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: ECBOA70B +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Aug 3 16:03:58 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 65) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 --- Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 100 100 --- Pre-fail Offline - 0 + 3 Spin_Up_Time 0x0007 228 228 --- Pre-fail Always - 1 + 4 Start_Stop_Count 0x0012 100 100 --- Old_age Always - 174 + 5 Reallocated_Sector_Ct 0x0033 100 100 --- Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 --- Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 100 100 --- Pre-fail Offline - 0 + 9 Power_On_Hours 0x0012 088 088 --- Old_age Always - 5451 + 10 Spin_Retry_Count 0x0013 100 100 --- Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 169 +191 G-Sense_Error_Rate 0x000a 100 100 --- Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 45 +193 Load_Cycle_Count 0x0012 100 100 --- Old_age Always - 324 +194 Temperature_Celsius 0x0002 146 146 --- Old_age Always - 41 (Min/Max 18/48) +196 Reallocated_Event_Count 0x0032 100 100 --- Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 --- Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 --- Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 --- Old_age Always - 0 +223 Load_Retry_Count 0x000a 100 100 --- Old_age Always - 0 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Hitachi/HTS5410/HTS541060G9SA00/78C83002C4A3 b/HDD/Hitachi/HTS5410/HTS541060G9SA00/78C83002C4A3 new file mode 100644 index 000000000..6527d3fef --- /dev/null +++ b/HDD/Hitachi/HTS5410/HTS541060G9SA00/78C83002C4A3 @@ -0,0 +1,90 @@ +smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 5K100 +Device Model: HTS541060G9SA00 +Serial Number: -- +Firmware Version: MB3OC60R +User Capacity: 60,011,642,880 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Wed Aug 19 20:32:18 2020 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 42) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 + 3 Spin_Up_Time 0x0007 241 241 033 Pre-fail Always - 1 + 4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 4241 + 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0012 086 086 000 Old_age Always - 6138 + 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 4237 +191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 140 +193 Load_Cycle_Count 0x0012 072 072 000 Old_age Always - 289790 +194 Temperature_Celsius 0x0002 130 130 000 Old_age Always - 42 (Min/Max 19/61) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 6 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Hitachi/HTS5416/HTS541680J9SA00/48CF48988424 b/HDD/Hitachi/HTS5416/HTS541680J9SA00/48CF48988424 new file mode 100644 index 000000000..5da5822fa --- /dev/null +++ b/HDD/Hitachi/HTS5416/HTS541680J9SA00/48CF48988424 @@ -0,0 +1,214 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 5K160 +Device Model: HTS541680J9SA00 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: SB2OC70P +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Sun Aug 2 13:10:50 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 44) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 253 253 033 - 0 + 4 Start_Stop_Count -O--C- 095 095 000 - 8812 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 047 047 000 - 23466 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 096 096 000 - 7035 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 098 098 000 - 465 +193 Load_Cycle_Count -O--C- 044 044 000 - 567333 +194 Temperature_Celsius -O---- 148 148 000 - 37 (Min/Max 8/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 36 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 19451 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 19451 [2] occurred at disk power-on lifetime: 22631 hours (942 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 00 00 01 00 00 Error: IDNF 1 sectors at LBA = 0x00000001 = 1 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 03 03 00 01 00 00 00 00 00 01 00 00 00:21:12.700 WRITE DMA EXT + 35 03 03 00 01 00 00 00 00 08 10 40 04 00:21:12.700 WRITE DMA EXT + 35 03 03 00 01 00 00 00 00 00 01 00 00 00:21:06.100 WRITE DMA EXT + 25 03 03 00 01 00 00 00 00 00 01 00 04 00:21:06.100 READ DMA EXT + 25 03 03 00 01 00 00 00 00 00 01 00 00 00:21:05.600 READ DMA EXT + +Error 19450 [1] occurred at disk power-on lifetime: 22631 hours (942 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 00 08 10 40 00 Error: IDNF 1 sectors at LBA = 0x00000810 = 2064 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 03 03 00 01 00 00 00 00 00 01 00 00 00:21:06.100 WRITE DMA EXT + 25 03 03 00 01 00 00 00 00 00 01 00 04 00:21:06.100 READ DMA EXT + 25 03 03 00 01 00 00 00 00 00 01 00 00 00:21:05.600 READ DMA EXT + 25 03 03 00 01 00 00 00 00 00 01 00 04 00:14:02.700 READ DMA EXT + 25 03 03 00 01 00 00 00 00 00 01 00 00 00:14:02.600 READ DMA EXT + +Error 19449 [0] occurred at disk power-on lifetime: 22631 hours (942 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 00 00 01 00 00 Error: IDNF 1 sectors at LBA = 0x00000001 = 1 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 03 03 00 01 00 00 00 00 00 01 00 00 00:21:05.600 READ DMA EXT + 25 03 03 00 01 00 00 00 00 00 01 00 04 00:14:02.700 READ DMA EXT + 25 03 03 00 01 00 00 00 00 00 01 00 00 00:14:02.600 READ DMA EXT + 00 03 03 00 01 00 00 00 00 00 01 00 04 00:14:02.600 NOP [Reserved subcommand] [OBS-ACS-2] + 00 03 03 00 01 00 00 00 00 00 01 00 00 00:14:01.300 NOP [Reserved subcommand] [OBS-ACS-2] + +Error 19448 [3] occurred at disk power-on lifetime: 22631 hours (942 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 00 00 01 00 00 Error: IDNF 1 sectors at LBA = 0x00000001 = 1 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 03 03 00 01 00 00 00 00 00 01 00 00 00:14:02.600 READ DMA EXT + 00 03 03 00 01 00 00 00 00 00 01 00 04 00:14:02.600 NOP [Reserved subcommand] [OBS-ACS-2] + 00 03 03 00 01 00 00 00 00 00 01 00 00 00:14:01.300 NOP [Reserved subcommand] [OBS-ACS-2] + 00 03 03 00 01 00 00 00 00 00 01 00 04 00:14:01.300 NOP [Reserved subcommand] [OBS-ACS-2] + 00 03 03 00 01 00 00 00 00 00 01 00 00 00:14:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 22204 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HTS5425/HTS542525K9SA00/79D4F4E5FFF3 b/HDD/Hitachi/HTS5425/HTS542525K9SA00/79D4F4E5FFF3 new file mode 100644 index 000000000..f7e392ba5 --- /dev/null +++ b/HDD/Hitachi/HTS5425/HTS542525K9SA00/79D4F4E5FFF3 @@ -0,0 +1,251 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 5K250 +Device Model: HTS542525K9SA00 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: BBFOC31P +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 3f +SATA Version is: SATA 2.5, 1.5 Gb/s +Local Time is: Mon Sep 28 21:51:37 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 107) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 247 247 033 - 1 + 4 Start_Stop_Count -O--C- 096 096 000 - 7834 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 001 001 000 - 63453 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 2951 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 45 +193 Load_Cycle_Count -O--C- 067 067 000 - 336598 +194 Temperature_Celsius -O---- 148 148 000 - 37 (Min/Max 1/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 39 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 290 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 290 [1] occurred at disk power-on lifetime: 63422 hours (2642 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 1d 1c 59 70 ed 00 Error: IDNF 1 sectors at LBA = 0x1d1c5970 = 488397168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 1d 1c 59 70 ed 00 29d+03:15:04.000 READ DMA EXT + 25 00 00 00 01 00 00 1d 1c 59 70 ed 04 29d+03:15:03.900 READ DMA EXT + 25 00 00 00 01 00 00 1d 1c 59 70 ed 00 29d+03:15:03.300 READ DMA EXT + 25 00 00 00 01 00 00 1d 1c 59 70 ed 04 29d+03:15:03.300 READ DMA EXT + 25 00 00 00 01 00 00 1d 1c 59 70 ed 00 29d+03:15:02.600 READ DMA EXT + +Error 289 [0] occurred at disk power-on lifetime: 63422 hours (2642 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 1d 1c 59 70 ed 00 Error: IDNF 1 sectors at LBA = 0x1d1c5970 = 488397168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 1d 1c 59 70 ed 00 29d+03:15:03.300 READ DMA EXT + 25 00 00 00 01 00 00 1d 1c 59 70 ed 04 29d+03:15:03.300 READ DMA EXT + 25 00 00 00 01 00 00 1d 1c 59 70 ed 00 29d+03:15:02.600 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 01 e0 00 29d+03:15:02.600 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 29d+03:15:02.600 READ DMA EXT + +Error 288 [3] occurred at disk power-on lifetime: 63422 hours (2642 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 1d 1c 59 70 ed 00 Error: IDNF 1 sectors at LBA = 0x1d1c5970 = 488397168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 1d 1c 59 70 ed 00 29d+03:15:02.600 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 01 e0 00 29d+03:15:02.600 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 29d+03:15:02.600 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 29d+03:15:02.200 READ DMA EXT + b0 00 da 00 00 00 00 00 c2 4f 00 e0 00 29d+03:14:57.400 SMART RETURN STATUS + +Error 287 [2] occurred at disk power-on lifetime: 62828 hours (2617 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 1d 1c 59 70 ed 00 Error: IDNF 1 sectors at LBA = 0x1d1c5970 = 488397168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 1d 1c 59 70 ed 00 4d+09:14:13.900 READ DMA EXT + 25 00 00 00 01 00 00 1d 1c 59 70 ed 04 4d+09:14:13.900 READ DMA EXT + 25 00 00 00 01 00 00 1d 1c 59 70 ed 00 4d+09:14:13.200 READ DMA EXT + 25 00 00 00 01 00 00 1d 1c 59 70 ed 04 4d+09:14:13.200 READ DMA EXT + 25 00 00 00 01 00 00 1d 1c 59 70 ed 00 4d+09:14:12.500 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0x45) Completed: unknown failure 00% 0 0 +# 2 Offline Completed without error 00% 0 - +# 3 Offline Completed without error 00% 0 - +# 4 Offline Completed without error 00% 0 - +# 5 Offline Completed without error 00% 0 - +# 6 Offline Completed without error 00% 0 - +# 7 Offline Completed without error 00% 0 - +# 8 Vendor (0x4d) Interrupted (host reset) 110% 0 - +# 9 Short offline Completed without error 00% 10834 - +#10 Offline Completed without error 00% 1 - +#11 Offline Completed without error 00% 0 - +#12 Offline Completed without error 00% 0 - +#13 Offline Completed without error 00% 0 - +#14 Offline Completed without error 00% 0 - +#15 Offline Completed without error 00% 0 - +#16 Offline Completed without error 00% 0 - +#17 Offline Completed without error 00% 0 - +#18 Offline Completed without error 00% 0 - +#19 Offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 36/39 Celsius +Lifetime Min/Max Temperature: 1/49 Celsius +Specified Max Operating Temperature: 29 Celsius +Under/Over Temperature Limit Count: 0/0 + +Unexpected SCT status 0x0000 (action_code=5, function_code=0) +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0009 2 22 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HTS5432/HTS543212L9A300/71F0731832E1 b/HDD/Hitachi/HTS5432/HTS543212L9A300/71F0731832E1 new file mode 100644 index 000000000..8de3f032e --- /dev/null +++ b/HDD/Hitachi/HTS5432/HTS543212L9A300/71F0731832E1 @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 5K320 +Device Model: HTS543212L9A300 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: FBBOC40F +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 3f +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Sep 28 21:51:38 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 52) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time PO---K 253 100 033 - 0 + 4 Start_Stop_Count -O--CK 099 099 000 - 2588 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 58750 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 2067 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 65536 +188 Command_Timeout -O--CK 100 097 000 - 65625 +190 Airflow_Temperature_Cel -O---K 064 040 000 - 36 (Min/Max 36/39) +191 G-Sense_Error_Rate -O-R-- 100 098 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 2687017 +193 Load_Cycle_Count -O--CK 084 084 000 - 162263 +194 Temperature_Celsius -O---K 152 091 000 - 36 (Min/Max 3/60) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-K 200 200 000 - 0 +223 Load_Retry_Count -O-R-K 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 39611 - +# 2 Short offline Completed without error 00% 3 - +# 3 Short offline Completed without error 00% 3 - +# 4 Short offline Completed without error 00% 2 - +# 5 Short offline Completed without error 00% 2 - +# 6 Short offline Completed without error 00% 2 - +# 7 Short offline Completed without error 00% 2 - +# 8 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/39 Celsius +Lifetime Min/Max Temperature: 3/60 Celsius +Specified Max Operating Temperature: 38 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (377) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS5432/HTS543225L9A300/966F4F259BE1 b/HDD/Hitachi/HTS5432/HTS543225L9A300/966F4F259BE1 new file mode 100644 index 000000000..d14c47037 --- /dev/null +++ b/HDD/Hitachi/HTS5432/HTS543225L9A300/966F4F259BE1 @@ -0,0 +1,237 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 5K320 +Device Model: HTS543225L9A300 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: FBEOC40C +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 3f +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Aug 10 18:46:43 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 102) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 253 253 033 - 0 + 4 Start_Stop_Count -O--C- 094 094 000 - 10598 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 060 060 000 - 17675 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 095 095 000 - 7955 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 1 +192 Power-Off_Retract_Count -O--CK 098 098 000 - 3277218 +193 Load_Cycle_Count -O--C- 073 073 000 - 273051 +194 Temperature_Celsius -O---- 110 110 000 - 50 (Min/Max 15/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 5 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 622 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 622 [1] occurred at disk power-on lifetime: 3606 hours (150 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 6e b4 1a 00 e0 00 Error: IDNF 1 sectors at LBA = 0x6eb41a00 = 1857296896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 6e b4 1a 00 e0 00 00:13:24.800 READ DMA EXT + 25 00 00 00 08 00 00 6e 79 e0 ce e0 00 00:13:24.700 READ DMA EXT + 25 00 00 00 08 00 00 6e 3f a7 9c e0 00 00:13:24.700 READ DMA EXT + 25 00 00 00 04 00 00 6e 3f a7 dc e0 00 00:13:24.600 READ DMA EXT + 25 00 00 00 01 00 00 6e 3f a7 9c e0 00 00:13:24.300 READ DMA EXT + +Error 621 [0] occurred at disk power-on lifetime: 3606 hours (150 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 08 00 00 6e 79 e0 ce e0 00 Error: IDNF 8 sectors at LBA = 0x6e79e0ce = 1853481166 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 6e 79 e0 ce e0 00 00:13:24.700 READ DMA EXT + 25 00 00 00 08 00 00 6e 3f a7 9c e0 00 00:13:24.700 READ DMA EXT + 25 00 00 00 04 00 00 6e 3f a7 dc e0 00 00:13:24.600 READ DMA EXT + 25 00 00 00 01 00 00 6e 3f a7 9c e0 00 00:13:24.300 READ DMA EXT + 35 00 00 00 08 00 00 11 7a 84 56 e0 00 00:13:24.300 WRITE DMA EXT + +Error 620 [3] occurred at disk power-on lifetime: 3606 hours (150 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 08 00 00 6e 3f a7 9c e0 00 Error: IDNF 8 sectors at LBA = 0x6e3fa79c = 1849665436 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 6e 3f a7 9c e0 00 00:13:24.700 READ DMA EXT + 25 00 00 00 04 00 00 6e 3f a7 dc e0 00 00:13:24.600 READ DMA EXT + 25 00 00 00 01 00 00 6e 3f a7 9c e0 00 00:13:24.300 READ DMA EXT + 35 00 00 00 08 00 00 11 7a 84 56 e0 00 00:13:24.300 WRITE DMA EXT + 25 00 00 00 08 00 00 05 12 38 ef e0 00 00:13:24.300 READ DMA EXT + +Error 619 [2] occurred at disk power-on lifetime: 3606 hours (150 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 04 00 00 6e 3f a7 dc e0 00 Error: IDNF 4 sectors at LBA = 0x6e3fa7dc = 1849665500 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 04 00 00 6e 3f a7 dc e0 00 00:13:24.600 READ DMA EXT + 25 00 00 00 01 00 00 6e 3f a7 9c e0 00 00:13:24.300 READ DMA EXT + 35 00 00 00 08 00 00 11 7a 84 56 e0 00 00:13:24.300 WRITE DMA EXT + 25 00 00 00 08 00 00 05 12 38 ef e0 00 00:13:24.300 READ DMA EXT + 25 00 00 00 04 00 00 05 12 39 2f e0 00 00:13:24.300 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 50 Celsius +Power Cycle Min/Max Temperature: 27/53 Celsius +Lifetime Min/Max Temperature: 15/54 Celsius +Specified Max Operating Temperature: 34 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (348) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS5432/HTS543232A7A384/1789738F4F04 b/HDD/Hitachi/HTS5432/HTS543232A7A384/1789738F4F04 new file mode 100644 index 000000000..fdc6e2441 --- /dev/null +++ b/HDD/Hitachi/HTS5432/HTS543232A7A384/1789738F4F04 @@ -0,0 +1,207 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar Z5K320 +Device Model: HTS543232A7A384 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: ES2OA60W +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Oct 23 21:34:44 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 84) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 + 2 Throughput_Performance P-S--K 100 100 040 - 0 + 3 Spin_Up_Time PO---K 211 100 033 - 1 + 4 Start_Stop_Count -O--CK 098 098 000 - 3365 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-K 100 100 067 - 0 + 8 Seek_Time_Performance P-S--K 100 100 040 - 0 + 9 Power_On_Hours -O--CK 084 084 000 - 7086 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 3360 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 25775898624 +188 Command_Timeout -O--CK 100 093 000 - 6809 +190 Airflow_Temperature_Cel -O---K 060 051 045 - 40 (Min/Max 19/43) +191 G-Sense_Error_Rate -O--CK 096 096 000 - 1236 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 4390979 +193 Load_Cycle_Count -O--CK 046 046 000 - 541047 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 +223 Load_Retry_Count -O-R-K 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 19/43 Celsius +Lifetime Min/Max Temperature: 17/49 Celsius +Specified Max Operating Temperature: 34 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (48) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3360 --- Lifetime Power-On Resets +0x01 0x010 4 7086 --- Power-on Hours +0x01 0x018 6 4261619301 --- Logical Sectors Written +0x01 0x020 6 42435844 --- Number of Write Commands +0x01 0x028 6 6448327012 --- Logical Sectors Read +0x01 0x030 6 77371550 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4731 --- Spindle Motor Power-on Hours +0x03 0x010 4 4689 --- Head Flying Hours +0x03 0x018 4 541047 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 48 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6809 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 39 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 36 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 140405 --- Number of Hardware Resets +0x06 0x010 4 4371 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS5432/HTS543232A7A384/A3C0B6B01487 b/HDD/Hitachi/HTS5432/HTS543232A7A384/A3C0B6B01487 new file mode 100644 index 000000000..c02016230 --- /dev/null +++ b/HDD/Hitachi/HTS5432/HTS543232A7A384/A3C0B6B01487 @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar Z5K320 +Device Model: HTS543232A7A384 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: ES2OA90B +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Oct 19 16:41:05 2020 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 104) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 214 214 033 - 1 + 4 Start_Stop_Count -O--C- 093 093 000 - 11781 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 095 095 000 - 2460 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 3592 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 65 +193 Load_Cycle_Count -O--C- 087 087 000 - 135659 +194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 20/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 29/31 Celsius +Lifetime Min/Max Temperature: 20/49 Celsius +Specified Max Operating Temperature: 35 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (80) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3592 --- Lifetime Power-On Resets +0x01 0x010 4 2460 --- Power-on Hours +0x01 0x018 6 6843529654 --- Logical Sectors Written +0x01 0x020 6 97344440 --- Number of Write Commands +0x01 0x028 6 7453301731 --- Logical Sectors Read +0x01 0x030 6 118886700 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2252 --- Spindle Motor Power-on Hours +0x03 0x010 4 2242 --- Head Flying Hours +0x03 0x018 4 135659 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 149 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3877 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 34 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 37 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 30682 --- Number of Hardware Resets +0x06 0x010 4 3977 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 0 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HTS5432/HTS543232L9A300/A9421920B315 b/HDD/Hitachi/HTS5432/HTS543232L9A300/A9421920B315 new file mode 100644 index 000000000..ac7147248 --- /dev/null +++ b/HDD/Hitachi/HTS5432/HTS543232L9A300/A9421920B315 @@ -0,0 +1,155 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 5K320 +Device Model: HTS543232L9A300 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: FB4OC40C +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 3f +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Aug 20 11:13:26 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 127) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 253 253 033 - 0 + 4 Start_Stop_Count -O--C- 096 096 000 - 7375 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 088 088 000 - 5363 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 096 096 000 - 7198 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 161 +193 Load_Cycle_Count -O--C- 092 092 000 - 82277 +194 Temperature_Celsius -O---- 127 127 000 - 43 (Min/Max 5/60) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 303 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 42/43 Celsius +Lifetime Min/Max Temperature: 5/60 Celsius +Specified Max Operating Temperature: 41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (246) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS5432/HTS543232L9SA02/5B72D2F7C6E5 b/HDD/Hitachi/HTS5432/HTS543232L9SA02/5B72D2F7C6E5 new file mode 100644 index 000000000..7402439fb --- /dev/null +++ b/HDD/Hitachi/HTS5432/HTS543232L9SA02/5B72D2F7C6E5 @@ -0,0 +1,241 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 5K320 +Device Model: HTS543232L9SA02 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: FB4AC50F +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 3f +SATA Version is: SATA 2.6, 1.5 Gb/s +Local Time is: Sun Jul 12 15:18:17 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 127) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 253 253 033 - 0 + 4 Start_Stop_Count -O--C- 096 096 000 - 7213 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 16 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 001 001 000 - 46905 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 096 096 000 - 7206 +160 Unknown_Attribute -O--CK 100 100 000 - 0 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 4294967296 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 83 +193 Load_Cycle_Count -O--C- 001 001 000 - 3639580 +194 Temperature_Celsius -O---- 105 105 000 - 52 (Min/Max 15/58) +195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 16 +197 Current_Pending_Sector -O---K 100 100 000 - 1 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 +254 Free_Fall_Sensor -O--CK 100 100 000 - 44 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa2 SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 98 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 98 [1] occurred at disk power-on lifetime: 36991 hours (1541 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 3a 00 00 16 5e 17 3e 46 00 Error: UNC 58 sectors at LBA = 0x165e173e = 375265086 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 02 00 00 00 16 5e 15 78 40 00 20:10:28.200 READ DMA EXT + 25 00 00 02 00 00 00 16 5e 15 78 40 00 20:10:23.800 READ DMA EXT + ef 00 10 00 02 00 00 00 00 00 00 00 00 20:10:23.800 SET FEATURES [Enable SATA feature] + ef 00 02 00 00 00 00 00 00 00 00 00 00 20:10:23.800 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 20:10:23.800 SET FEATURES [Enable read look-ahead] + +Error 97 [0] occurred at disk power-on lifetime: 36991 hours (1541 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 3a 00 00 16 5e 17 3e 46 00 Error: UNC 58 sectors at LBA = 0x165e173e = 375265086 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 02 00 00 00 16 5e 15 78 40 00 20:10:23.800 READ DMA EXT + ef 00 10 00 02 00 00 00 00 00 00 00 00 20:10:23.800 SET FEATURES [Enable SATA feature] + ef 00 02 00 00 00 00 00 00 00 00 00 00 20:10:23.800 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 20:10:23.800 SET FEATURES [Enable read look-ahead] + ef 00 03 00 46 00 00 00 00 00 00 00 00 20:10:23.800 SET FEATURES [Set transfer mode] + +Error 96 [3] occurred at disk power-on lifetime: 36991 hours (1541 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 3a 00 00 16 5e 17 3e 46 00 Error: UNC 58 sectors at LBA = 0x165e173e = 375265086 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 02 00 00 00 16 5e 15 78 40 00 20:09:51.700 READ DMA EXT + 25 00 00 02 00 00 00 16 5e 15 78 40 00 20:09:47.300 READ DMA EXT + ef 00 10 00 02 00 00 00 00 00 00 00 00 20:09:47.300 SET FEATURES [Enable SATA feature] + ef 00 02 00 00 00 00 00 00 00 00 00 00 20:09:47.300 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 20:09:47.300 SET FEATURES [Enable read look-ahead] + +Error 95 [2] occurred at disk power-on lifetime: 36991 hours (1541 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 3a 00 00 16 5e 17 3e 46 00 Error: UNC 58 sectors at LBA = 0x165e173e = 375265086 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 02 00 00 00 16 5e 15 78 40 00 20:09:47.300 READ DMA EXT + ef 00 10 00 02 00 00 00 00 00 00 00 00 20:09:47.300 SET FEATURES [Enable SATA feature] + ef 00 02 00 00 00 00 00 00 00 00 00 00 20:09:47.300 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 00 00 20:09:47.300 SET FEATURES [Enable read look-ahead] + ef 00 03 00 46 00 00 00 00 00 00 00 00 20:09:47.300 SET FEATURES [Set transfer mode] + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 52 Celsius +Power Cycle Min/Max Temperature: 46/57 Celsius +Lifetime Min/Max Temperature: 15/58 Celsius +Specified Max Operating Temperature: 49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (91) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 73 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 73 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS5450/HTS545025B9SA02/0CA6CEDFCEFE b/HDD/Hitachi/HTS5450/HTS545025B9SA02/0CA6CEDFCEFE new file mode 100644 index 000000000..c6fb90560 --- /dev/null +++ b/HDD/Hitachi/HTS5450/HTS545025B9SA02/0CA6CEDFCEFE @@ -0,0 +1,161 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HTS545025B9SA02 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: PB2AC60T +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 1.5 Gb/s +Local Time is: Sat Oct 31 12:33:15 2020 HDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 83) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 201 201 033 - 1 + 4 Start_Stop_Count -O--C- 092 092 000 - 13594 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 045 045 000 - 24199 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 092 092 000 - 13094 +160 Unknown_Attribute -O--CK 100 100 000 - 0 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 1902670512128 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 107556241733 +193 Load_Cycle_Count -O--C- 001 001 000 - 1012120 +194 Temperature_Celsius -O---- 152 152 000 - 36 (Min/Max 3/50) +195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 +254 Free_Fall_Sensor -O--CK 001 001 000 - 28182 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa2 SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 20/36 Celsius +Lifetime Min/Max Temperature: 3/50 Celsius +Specified Max Operating Temperature: 35 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (268) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS5450/HTS545032B9A300/CA5E90AA73EC b/HDD/Hitachi/HTS5450/HTS545032B9A300/CA5E90AA73EC new file mode 100644 index 000000000..50c4a09d3 --- /dev/null +++ b/HDD/Hitachi/HTS5450/HTS545032B9A300/CA5E90AA73EC @@ -0,0 +1,163 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 5K500.B +Device Model: HTS545032B9A300 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: PB3OCA0G +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Aug 20 01:33:24 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 106) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 + 2 Throughput_Performance P-S--K 100 100 040 - 0 + 3 Spin_Up_Time PO---K 146 100 033 - 2 + 4 Start_Stop_Count -O--CK 100 100 000 - 1536 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-K 100 100 067 - 0 + 8 Seek_Time_Performance P-S--K 100 100 040 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 2480 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1500 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 17182162944 +188 Command_Timeout -O--CK 082 001 000 - 1826 +190 Airflow_Temperature_Cel -O---K 053 040 045 Past 47 (Min/Max 27/48) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 6 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 3080239 +193 Load_Cycle_Count -O--CK 092 092 000 - 87148 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 +223 Load_Retry_Count -O-R-K 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 27/48 Celsius +Lifetime Min/Max Temperature: 13/60 Celsius +Specified Max Operating Temperature: 43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (102) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 13 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS5450/HTS545050A7E380/19E73DBAE474 b/HDD/Hitachi/HTS5450/HTS545050A7E380/19E73DBAE474 new file mode 100644 index 000000000..2473f1dbf --- /dev/null +++ b/HDD/Hitachi/HTS5450/HTS545050A7E380/19E73DBAE474 @@ -0,0 +1,244 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar Z5K500 +Device Model: HTS545050A7E380 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: GG2OA7J0 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 1.5 Gb/s +Local Time is: Sat Oct 31 20:04:09 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 115) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 214 214 033 - 1 + 4 Start_Stop_Count -O--C- 099 099 000 - 1745 + 5 Reallocated_Sector_Ct PO--CK 096 096 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 095 095 000 - 2239 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 870 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 200 +193 Load_Cycle_Count -O--C- 095 095 000 - 51262 +194 Temperature_Celsius -O---- 230 230 000 - 26 (Min/Max 15/48) +196 Reallocated_Event_Count -O--CK 095 095 000 - 341 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 6 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 6 [1] occurred at disk power-on lifetime: 646 hours (26 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 10 00 00 23 4a e5 90 03 00 Error: UNC 16 sectors at LBA = 0x234ae590 = 592110992 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 20 00 00 23 4a e5 80 40 00 00:07:38.761 READ DMA EXT + 25 00 00 00 40 00 00 00 00 78 18 40 00 00:07:38.759 READ DMA EXT + 25 00 00 00 80 00 00 23 4a e5 00 40 00 00:07:38.675 READ DMA EXT + 25 00 00 00 20 00 00 00 00 78 f8 40 00 00:07:38.648 READ DMA EXT + 25 00 00 00 40 00 00 23 4a dc 60 40 00 00:07:38.647 READ DMA EXT + +Error 5 [0] occurred at disk power-on lifetime: 646 hours (26 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 10 00 00 23 4a e5 90 03 00 Error: UNC 16 sectors at LBA = 0x234ae590 = 592110992 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 20 00 00 23 4a e5 80 40 00 00:02:51.607 READ DMA EXT + 25 00 00 00 20 00 00 2e 83 05 e0 40 00 00:02:51.606 READ DMA EXT + 25 00 00 00 80 00 00 23 4a e5 00 40 00 00:02:51.443 READ DMA EXT + 25 00 00 00 20 00 00 2e 83 06 00 40 00 00:02:51.434 READ DMA EXT + 25 00 00 00 20 00 00 2e 83 00 a0 40 00 00:02:51.419 READ DMA EXT + +Error 4 [3] occurred at disk power-on lifetime: 556 hours (23 days + 4 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 10 00 00 0c 30 3e 90 0c 00 Error: UNC 16 sectors at LBA = 0x0c303e90 = 204488336 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 20 00 00 0c 30 3e 80 40 00 00:06:44.580 READ DMA EXT + 35 00 00 00 20 00 00 2e 82 b2 a0 40 00 00:06:44.580 WRITE DMA EXT + 35 00 00 00 20 00 00 1a a2 df c0 40 00 00:06:44.579 WRITE DMA EXT + 25 00 00 00 20 00 00 0c 30 3e 80 40 00 00:06:40.658 READ DMA EXT + 25 00 00 00 04 00 00 01 8d 07 ec 40 00 00:06:40.623 READ DMA EXT + +Error 3 [2] occurred at disk power-on lifetime: 556 hours (23 days + 4 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 10 00 00 0c 30 3e 90 0c 00 Error: UNC 16 sectors at LBA = 0x0c303e90 = 204488336 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 20 00 00 0c 30 3e 80 40 00 00:06:40.658 READ DMA EXT + 25 00 00 00 04 00 00 01 8d 07 ec 40 00 00:06:40.623 READ DMA EXT + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:06:40.622 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:06:40.602 IDENTIFY DEVICE + 25 00 00 00 20 00 00 0c 30 3e 80 40 00 00:06:36.974 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 21/33 Celsius +Lifetime Min/Max Temperature: 15/48 Celsius +Specified Max Operating Temperature: 29 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (43) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 0 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS5475/HTS547550A9E384/5C02B8F729A8 b/HDD/Hitachi/HTS5475/HTS547550A9E384/5C02B8F729A8 new file mode 100644 index 000000000..636429722 --- /dev/null +++ b/HDD/Hitachi/HTS5475/HTS547550A9E384/5C02B8F729A8 @@ -0,0 +1,162 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar 5K750 +Device Model: HTS547550A9E384 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: JE3OA60A +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sun Oct 4 04:59:18 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 181 181 033 - 1 + 4 Start_Stop_Count -O--C- 099 099 000 - 3054 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 081 081 000 - 8660 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 2303 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 65536 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 57 +193 Load_Cycle_Count -O--C- 067 067 000 - 339530 +194 Temperature_Celsius -O---- 230 230 000 - 26 (Min/Max 6/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 1 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 22/30 Celsius +Lifetime Min/Max Temperature: 6/50 Celsius +Specified Max Operating Temperature: 35 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (126) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS5475/HTS547550A9E384/FFF50A1F9B55 b/HDD/Hitachi/HTS5475/HTS547550A9E384/FFF50A1F9B55 new file mode 100644 index 000000000..a0fe90e74 --- /dev/null +++ b/HDD/Hitachi/HTS5475/HTS547550A9E384/FFF50A1F9B55 @@ -0,0 +1,245 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Travelstar 5K750 +Device Model: HTS547550A9E384 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: JE3OA50B +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Jul 13 08:51:43 2020 -04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 143) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 176 176 033 - 1 + 4 Start_Stop_Count -O--C- 097 097 000 - 5092 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 064 064 000 - 15842 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 3991 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 126 +193 Load_Cycle_Count -O--C- 024 024 000 - 766710 +194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 17/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 128 +197 Current_Pending_Sector -O---K 100 100 000 - 16 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 12 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 12 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 12 [3] occurred at disk power-on lifetime: 12473 hours (519 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 39 60 76 77 09 00 Error: ICRC, ABRT at LBA = 0x39607677 = 962623095 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 04 00 00 e8 00 00 39 60 ff 50 40 00 00:00:23.621 READ FPDMA QUEUED + 60 03 f8 00 e0 00 00 39 60 fb 50 40 00 00:00:23.616 READ FPDMA QUEUED + 60 04 00 00 d8 00 00 39 60 f7 50 40 00 00:00:23.611 READ FPDMA QUEUED + 60 04 00 00 d0 00 00 39 60 f3 50 40 00 00:00:23.611 READ FPDMA QUEUED + 60 04 00 00 c8 00 00 39 60 ef 50 40 00 00:00:23.609 READ FPDMA QUEUED + +Error 11 [2] occurred at disk power-on lifetime: 12473 hours (519 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 03 d9 00 00 39 52 62 1f 09 00 Error: ICRC, ABRT at LBA = 0x3952621f = 961700383 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 04 00 00 18 00 00 39 52 76 00 40 00 00:00:13.865 READ FPDMA QUEUED + 60 04 00 00 10 00 00 39 52 7a 00 40 00 00:00:13.865 READ FPDMA QUEUED + 60 04 00 00 08 00 00 39 52 5a 00 40 00 00:00:13.865 READ FPDMA QUEUED + 60 04 00 00 00 00 00 39 52 8e 00 40 00 00:00:13.865 READ FPDMA QUEUED + 60 02 a8 00 f0 00 00 39 52 92 00 40 00 00:00:13.865 READ FPDMA QUEUED + +Error 10 [1] occurred at disk power-on lifetime: 12473 hours (519 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 01 51 00 00 39 52 8c af 09 00 Error: ICRC, ABRT at LBA = 0x39528caf = 961711279 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 02 a8 00 20 00 00 39 52 92 00 40 00 00:00:13.454 READ FPDMA QUEUED + 60 04 00 00 18 00 00 39 52 8e 00 40 00 00:00:13.441 READ FPDMA QUEUED + 60 04 00 00 30 00 00 39 52 8a 00 40 00 00:00:13.425 READ FPDMA QUEUED + 60 04 00 00 28 00 00 39 52 86 00 40 00 00:00:13.412 READ FPDMA QUEUED + 60 03 f8 00 20 00 00 39 52 82 00 40 00 00:00:13.399 READ FPDMA QUEUED + +Error 9 [0] occurred at disk power-on lifetime: 12400 hours (516 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 01 81 00 00 39 4f 8d bf 09 00 Error: ICRC, ABRT at LBA = 0x394f8dbf = 961514943 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 70 00 20 00 00 39 4f bb 40 40 00 00:00:19.164 READ FPDMA QUEUED + 60 04 00 00 18 00 00 39 4f b7 40 40 00 00:00:19.164 READ FPDMA QUEUED + 60 03 f8 00 60 00 00 39 4f b3 40 40 00 00:00:19.144 READ FPDMA QUEUED + 60 04 00 00 58 00 00 39 4f af 40 40 00 00:00:19.144 READ FPDMA QUEUED + 60 04 00 00 80 00 00 39 4f ab 40 40 00 00:00:19.117 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed: read failure 70% 14370 272028128 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 25/36 Celsius +Lifetime Min/Max Temperature: 17/51 Celsius +Specified Max Operating Temperature: 35 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (62) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS7210/HTS721060G9SA00/41C49467A917 b/HDD/Hitachi/HTS7210/HTS721060G9SA00/41C49467A917 new file mode 100644 index 000000000..770ace1e2 --- /dev/null +++ b/HDD/Hitachi/HTS7210/HTS721060G9SA00/41C49467A917 @@ -0,0 +1,119 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 7K100 +Device Model: HTS721060G9SA00 +Serial Number: -- +Firmware Version: MC3IC14V +User Capacity: 60,011,642,880 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Thu Oct 29 14:10:25 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x85) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 35) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 1299 + 3 Spin_Up_Time POS--- 222 222 033 - 1 + 4 Start_Stop_Count -O--C- 098 098 000 - 3643 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 016 016 000 - 37093 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 3373 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 2338193484 +193 Load_Cycle_Count -O--C- 048 048 000 - 521285 +194 Temperature_Celsius -O---- 127 127 000 - 43 (Min/Max 8/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 3 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/HDD/Hitachi/HTS7232/HTS723220L9A360/F692E6E9D0AA b/HDD/Hitachi/HTS7232/HTS723220L9A360/F692E6E9D0AA new file mode 100644 index 000000000..5ca4754c3 --- /dev/null +++ b/HDD/Hitachi/HTS7232/HTS723220L9A360/F692E6E9D0AA @@ -0,0 +1,237 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HTS723220L9A360 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: FC3OC30F +User Capacity: 200,049,647,616 bytes [200 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 3f +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Sep 3 15:22:17 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 73) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 243 243 033 - 1 + 4 Start_Stop_Count -O--C- 098 098 000 - 3159 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 078 078 000 - 9638 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 3148 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 210108541 +193 Load_Cycle_Count -O--C- 072 072 000 - 289542 +194 Temperature_Celsius -O---- 119 119 000 - 46 (Min/Max 0/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa2 SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 65535 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 65535 [1] occurred at disk power-on lifetime: 5856 hours (244 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 ff f8 17 49 f1 8f e0 00 Error: IDNF 1 sectors at LBA = 0xfff81749f18f = 281441007694223 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 ff f8 17 49 f1 8f e0 00 00:00:08.200 READ DMA EXT + 25 00 00 00 01 ff f9 17 49 f1 90 e0 00 00:00:08.100 READ DMA EXT + 25 00 00 00 01 ff f9 17 49 f1 91 e0 00 00:00:08.000 READ DMA EXT + 25 00 00 00 01 ff f9 17 49 f1 92 e0 00 00:00:08.000 READ DMA EXT + 25 00 00 00 01 ff fa 17 49 f1 93 e0 00 00:00:07.900 READ DMA EXT + +Error 65534 [0] occurred at disk power-on lifetime: 5856 hours (244 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 ff f9 17 49 f1 90 e0 00 Error: IDNF 1 sectors at LBA = 0xfff91749f190 = 281445302661520 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 ff f9 17 49 f1 90 e0 00 00:00:08.100 READ DMA EXT + 25 00 00 00 01 ff f9 17 49 f1 91 e0 00 00:00:08.000 READ DMA EXT + 25 00 00 00 01 ff f9 17 49 f1 92 e0 00 00:00:08.000 READ DMA EXT + 25 00 00 00 01 ff fa 17 49 f1 93 e0 00 00:00:07.900 READ DMA EXT + 25 00 00 00 01 ff fa 17 49 f1 94 e0 00 00:00:07.800 READ DMA EXT + +Error 65533 [3] occurred at disk power-on lifetime: 5856 hours (244 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 ff f9 17 49 f1 91 e0 00 Error: IDNF 1 sectors at LBA = 0xfff91749f191 = 281445302661521 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 ff f9 17 49 f1 91 e0 00 00:00:08.000 READ DMA EXT + 25 00 00 00 01 ff f9 17 49 f1 92 e0 00 00:00:08.000 READ DMA EXT + 25 00 00 00 01 ff fa 17 49 f1 93 e0 00 00:00:07.900 READ DMA EXT + 25 00 00 00 01 ff fa 17 49 f1 94 e0 00 00:00:07.800 READ DMA EXT + 25 00 00 00 01 ff fa 17 49 f1 95 e0 00 00:00:07.800 READ DMA EXT + +Error 65532 [2] occurred at disk power-on lifetime: 5856 hours (244 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 ff f9 17 49 f1 92 e0 00 Error: IDNF 1 sectors at LBA = 0xfff91749f192 = 281445302661522 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 ff f9 17 49 f1 92 e0 00 00:00:08.000 READ DMA EXT + 25 00 00 00 01 ff fa 17 49 f1 93 e0 00 00:00:07.900 READ DMA EXT + 25 00 00 00 01 ff fa 17 49 f1 94 e0 00 00:00:07.800 READ DMA EXT + 25 00 00 00 01 ff fa 17 49 f1 95 e0 00 00:00:07.800 READ DMA EXT + 25 00 00 00 01 ff fa 17 49 f1 96 e0 00 00:00:07.700 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 19/46 Celsius +Lifetime Min/Max Temperature: 0/54 Celsius +Specified Max Operating Temperature: 36 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (218) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS7232/HTS723225L9A360/0C0BB832DD05 b/HDD/Hitachi/HTS7232/HTS723225L9A360/0C0BB832DD05 new file mode 100644 index 000000000..7bbb4ab98 --- /dev/null +++ b/HDD/Hitachi/HTS7232/HTS723225L9A360/0C0BB832DD05 @@ -0,0 +1,160 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 7K320 +Device Model: HTS723225L9A360 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: FCDOC30F +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 3f +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Oct 29 10:09:13 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 83) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 235 235 033 - 2 + 4 Start_Stop_Count -O--C- 100 100 000 - 175 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 065 065 000 - 15469 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 172 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 31 +193 Load_Cycle_Count -O--C- 001 001 000 - 1079484 +194 Temperature_Celsius -O---- 220 220 000 - 25 (Min/Max 14/33) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa2 SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 14509 - +# 2 Short offline Completed without error 00% 5966 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 22/28 Celsius +Lifetime Min/Max Temperature: 14/33 Celsius +Specified Max Operating Temperature: 23 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (429) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HTS7250/HTS725025A9A364/69246A9CFF12 b/HDD/Hitachi/HTS7250/HTS725025A9A364/69246A9CFF12 new file mode 100644 index 000000000..064116849 --- /dev/null +++ b/HDD/Hitachi/HTS7250/HTS725025A9A364/69246A9CFF12 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Travelstar 7K500 +Device Model: HTS725025A9A364 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: PC2OC70E +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Aug 5 21:15:18 2020 +04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 645) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 67) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 + 2 Throughput_Performance P-S--- 100 100 040 - 0 + 3 Spin_Up_Time POS--- 223 223 033 - 1 + 4 Start_Stop_Count -O--C- 098 098 000 - 4329 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 040 - 0 + 9 Power_On_Hours -O--C- 070 070 000 - 13152 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 4326 +191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 13 +193 Load_Cycle_Count -O--C- 001 001 000 - 1103542 +194 Temperature_Celsius -O---- 137 137 000 - 40 (Min/Max 15/52) +196 Reallocated_Event_Count -O--CK 100 100 000 - 11 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +223 Load_Retry_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] occurred at disk power-on lifetime: 10394 hours (433 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 05 00 00 1d 1c 59 70 e0 00 Error: IDNF 5 sectors at LBA = 0x1d1c5970 = 488397168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 ff ff 00 05 00 00 1d 1c 59 70 e0 08 00:41:38.600 READ DMA EXT + c6 ff ff 01 08 1d c4 4b 00 00 00 e0 08 00:41:38.600 SET MULTIPLE MODE + 10 ff ff 3f 01 00 79 03 1d c4 4b e0 08 00:41:38.600 RECALIBRATE [OBS-4] + 91 ff ff 01 3f 00 00 01 00 79 03 af 08 00:41:38.600 INITIALIZE DEVICE PARAMETERS [OBS-6] + 25 ff ff 00 05 00 00 1d 1c 59 70 e0 04 00:41:38.500 READ DMA EXT + +Error 2 [1] occurred at disk power-on lifetime: 10394 hours (433 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 05 00 00 1d 1c 59 70 e0 00 Error: IDNF 5 sectors at LBA = 0x1d1c5970 = 488397168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 ff ff 00 05 00 00 1d 1c 59 70 e0 08 00:41:38.500 READ DMA EXT + c6 ff ff 01 08 1d c4 4b 00 00 00 e0 08 00:41:38.500 SET MULTIPLE MODE + 10 ff ff 3f 01 00 79 03 1d c4 4b e0 08 00:41:38.400 RECALIBRATE [OBS-4] + 91 ff ff 01 3f 00 00 01 00 79 03 af 08 00:41:38.400 INITIALIZE DEVICE PARAMETERS [OBS-6] + 25 ff ff 00 05 00 00 1d 1c 59 70 e0 04 00:41:38.400 READ DMA EXT + +Error 1 [0] occurred at disk power-on lifetime: 10394 hours (433 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 05 00 00 1d 1c 59 70 e0 00 Error: IDNF 5 sectors at LBA = 0x1d1c5970 = 488397168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 ff ff 00 05 00 00 1d 1c 59 70 e0 08 00:41:38.300 READ DMA EXT + 25 ff ff 00 03 00 00 1d 1c 59 6d e0 08 00:41:38.300 READ DMA EXT + 25 ff ff 00 02 00 00 12 bf ff fd e0 08 00:41:38.300 READ DMA EXT + 25 ff ff 00 06 00 00 12 bf ff f7 e0 08 00:41:38.300 READ DMA EXT + c8 ff ff 00 01 7f ff 16 7f ff 17 ec 08 00:41:38.300 READ DMA + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 306 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 24/40 Celsius +Lifetime Min/Max Temperature: 15/52 Celsius +Specified Max Operating Temperature: 39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 478 (371) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HTS7250/HTS725032A7E630/26BB9595BEBF b/HDD/Hitachi/HTS7250/HTS725032A7E630/26BB9595BEBF new file mode 100644 index 000000000..b16e12a90 --- /dev/null +++ b/HDD/Hitachi/HTS7250/HTS725032A7E630/26BB9595BEBF @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HTS725032A7E630 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: GHBOA3E0 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 14 19:28:14 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x85) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4149) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 71) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 + 2 Throughput_Performance P-S--K 198 100 040 - 114 + 3 Spin_Up_Time PO---K 222 100 033 - 1 + 4 Start_Stop_Count -O--CK 099 099 000 - 2312 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-K 100 100 067 - 0 + 8 Seek_Time_Performance P-S--K 115 100 040 - 34 + 9 Power_On_Hours -O--CK 081 081 000 - 8362 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 2311 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 68801986560 +188 Command_Timeout -O--CK 100 100 000 - 458753 +190 Airflow_Temperature_Cel -O---K 067 059 045 - 33 (Min/Max 22/36) +191 G-Sense_Error_Rate -O--CK 054 054 000 - 11908 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 5374034 +193 Load_Cycle_Count -O--CK 059 059 000 - 411527 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 +223 Load_Retry_Count -O-R-K 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 80% 5 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 22/36 Celsius +Lifetime Min/Max Temperature: 8/41 Celsius +Specified Max Operating Temperature: 29 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/65 Celsius +Temperature History Size (Index): 128 (94) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HUA7220/HUA722020ALA331/37A0FCFABCB1 b/HDD/Hitachi/HUA7220/HUA722020ALA331/37A0FCFABCB1 new file mode 100644 index 000000000..08e7aff33 --- /dev/null +++ b/HDD/Hitachi/HUA7220/HUA722020ALA331/37A0FCFABCB1 @@ -0,0 +1,97 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Ultrastar A7K2000 +Device Model: HUA722020ALA331 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: JKAOA3NH +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Jul 29 20:00:46 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (22477) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 375) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 --- Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 133 133 --- Pre-fail Offline - 100 + 3 Spin_Up_Time 0x0007 137 137 --- Pre-fail Always - 510 (Average 546) + 4 Start_Stop_Count 0x0012 100 100 --- Old_age Always - 220 + 5 Reallocated_Sector_Ct 0x0033 100 100 --- Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 --- Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 121 121 --- Pre-fail Offline - 35 + 9 Power_On_Hours 0x0012 092 092 --- Old_age Always - 59717 + 10 Spin_Retry_Count 0x0013 100 100 --- Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 217 +192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 473 +193 Load_Cycle_Count 0x0012 100 100 --- Old_age Always - 473 +194 Temperature_Celsius 0x0002 133 133 --- Old_age Always - 45 (Min/Max 14/54) +196 Reallocated_Event_Count 0x0032 100 100 --- Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 --- Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 --- Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 --- Old_age Always - 0 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Hitachi/HUA7220/HUA722020ALA331/6F867BF4A3E0 b/HDD/Hitachi/HUA7220/HUA722020ALA331/6F867BF4A3E0 new file mode 100644 index 000000000..2d3d41bb7 --- /dev/null +++ b/HDD/Hitachi/HUA7220/HUA722020ALA331/6F867BF4A3E0 @@ -0,0 +1,201 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Ultrastar A7K2000 +Device Model: HUA722020ALA331 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: JKAOA3NH +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Oct 28 23:56:23 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (22183) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 370) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 132 132 054 - 106 + 3 Spin_Up_Time POS--- 134 134 024 - 481 (Average 599) + 4 Start_Stop_Count -O--C- 100 100 000 - 84 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 35 + 9 Power_On_Hours -O--C- 090 090 000 - 72078 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 82 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 123 +193 Load_Cycle_Count -O--C- 100 100 000 - 123 +194 Temperature_Celsius -O---- 127 127 000 - 47 (Min/Max 19/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 63 Current Device Internal Status Data log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short captive Completed without error 00% 37497 - +# 2 Short offline Completed without error 00% 35954 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 40/50 Celsius +Lifetime Min/Max Temperature: 19/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (23) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 82 --- Lifetime Power-On Resets +0x01 0x010 4 72078 --- Power-on Hours +0x01 0x018 6 893089361306 --- Logical Sectors Written +0x01 0x020 6 2060700749 --- Number of Write Commands +0x01 0x028 6 2851342070836 --- Logical Sectors Read +0x01 0x030 6 4357869968 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 71990 --- Spindle Motor Power-on Hours +0x03 0x010 4 71990 --- Head Flying Hours +0x03 0x018 4 123 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 10487 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 117 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x010 1 45 N-- Average Short Term Temperature +0x05 0x018 1 43 N-- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 49 N-- Highest Average Short Term Temperature +0x05 0x038 1 0 N-- Lowest Average Short Term Temperature +0x05 0x040 1 47 N-- Highest Average Long Term Temperature +0x05 0x048 1 0 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1160 --- Number of Hardware Resets +0x06 0x010 4 562 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HUA7230/HUA723020ALA640/3543FF6DC269 b/HDD/Hitachi/HUA7230/HUA723020ALA640/3543FF6DC269 new file mode 100644 index 000000000..c1093f76c --- /dev/null +++ b/HDD/Hitachi/HUA7230/HUA723020ALA640/3543FF6DC269 @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HUA723020ALA640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MK7ONS01 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 18:34:38 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (19116) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 319) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 100 100 054 - 0 + 3 Spin_Up_Time POS--- 128 128 024 - 490 (Average 486) + 4 Start_Stop_Count -O--C- 100 100 000 - 96 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 020 - 0 + 9 Power_On_Hours -O--C- 093 093 000 - 51766 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 86 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 2022 +193 Load_Cycle_Count -O--C- 099 099 000 - 2022 +194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 13/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 63 Current Device Internal Status Data log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xa2 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 17/34 Celsius +Lifetime Min/Max Temperature: 13/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (22) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 86 --- Lifetime Power-On Resets +0x01 0x010 4 51766 --- Power-on Hours +0x01 0x018 6 88843708127 --- Logical Sectors Written +0x01 0x020 6 252349247 --- Number of Write Commands +0x01 0x028 6 821698152417 --- Logical Sectors Read +0x01 0x030 6 3331205188 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 51743 --- Spindle Motor Power-on Hours +0x03 0x010 4 51743 --- Head Flying Hours +0x03 0x018 4 2022 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 2 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 32 N-- Average Short Term Temperature +0x05 0x018 1 36 N-- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 37 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 431 --- Number of Hardware Resets +0x06 0x010 4 345 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUA7230/HUA723020ALA640/5540FF2DEC4B b/HDD/Hitachi/HUA7230/HUA723020ALA640/5540FF2DEC4B new file mode 100644 index 000000000..82640e1c0 --- /dev/null +++ b/HDD/Hitachi/HUA7230/HUA723020ALA640/5540FF2DEC4B @@ -0,0 +1,98 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi Ultrastar 7K3000 +Device Model: HUA723020ALA640 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MK7OAA10 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 23:09:26 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 319) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 85 + 3 Spin_Up_Time 0x0007 145 145 024 Pre-fail Always - 498 (Average 361) + 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1554 + 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 123 123 020 Pre-fail Offline - 31 + 9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 41575 + 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1547 +192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2380 +193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 2380 +194 Temperature_Celsius 0x0002 153 153 000 Old_age Always - 39 (Min/Max -6/56) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 169 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Hitachi/HUS7240/HUS724030ALE641/3D37350CFE02 b/HDD/Hitachi/HUS7240/HUS724030ALE641/3D37350CFE02 new file mode 100644 index 000000000..61feafc84 --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724030ALE641/3D37350CFE02 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724030ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJ8OA5F0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:03:59 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 80 + 3 Spin_Up_Time POS--- 161 161 024 - 324 (Average 450) + 4 Start_Stop_Count -O--C- 100 100 000 - 53 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 100 100 000 - 1180 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 87 +193 Load_Cycle_Count -O--C- 100 100 000 - 87 +194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 24/39) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 54420 - +# 2 Short offline Completed without error 00% 54416 - +# 3 Vendor (0xb0) Completed without error 00% 54256 - +# 4 Vendor (0x71) Completed without error 00% 54256 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 29/37 Celsius +Lifetime Min/Max Temperature: 24/39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (11) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x018 6 8095604024 --- Logical Sectors Written +0x01 0x020 6 18158876 --- Number of Write Commands +0x01 0x028 6 1808451173 --- Logical Sectors Read +0x01 0x030 6 20549919 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1179 --- Spindle Motor Power-on Hours +0x03 0x010 4 1179 --- Head Flying Hours +0x03 0x018 4 87 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 38 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 36 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 562 --- Number of Hardware Resets +0x06 0x010 4 181 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUS7240/HUS724030ALE641/5FBB310421B1 b/HDD/Hitachi/HUS7240/HUS724030ALE641/5FBB310421B1 new file mode 100644 index 000000000..d67765714 --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724030ALE641/5FBB310421B1 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724030ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJ8OA5F0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:03:56 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 80 + 3 Spin_Up_Time POS--- 153 153 024 - 363 (Average 451) + 4 Start_Stop_Count -O--C- 100 100 000 - 475 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 096 096 000 - 34667 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 192 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1193 +193 Load_Cycle_Count -O--C- 100 100 000 - 1196 +194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 19/61) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 33047 - +# 2 Extended offline Completed without error 00% 32773 - +# 3 Vendor (0xb0) Completed without error 00% 17010 - +# 4 Vendor (0x71) Completed without error 00% 17010 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 28/36 Celsius +Lifetime Min/Max Temperature: 19/61 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (103) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 192 --- Lifetime Power-On Resets +0x01 0x018 6 502846017343 --- Logical Sectors Written +0x01 0x020 6 1928065639 --- Number of Write Commands +0x01 0x028 6 884966108144 --- Logical Sectors Read +0x01 0x030 6 1837316532 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 34651 --- Spindle Motor Power-on Hours +0x03 0x010 4 34651 --- Head Flying Hours +0x03 0x018 4 1196 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 497 --- Read Recovery Attempts +0x03 0x030 4 1 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 31 N-- Average Short Term Temperature +0x05 0x018 1 31 N-- Average Long Term Temperature +0x05 0x020 1 61 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 56 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 52 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 110 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3918 --- Number of Hardware Resets +0x06 0x010 4 857 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUS7240/HUS724030ALE641/BC8E8575FF49 b/HDD/Hitachi/HUS7240/HUS724030ALE641/BC8E8575FF49 new file mode 100644 index 000000000..a8fa36d81 --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724030ALE641/BC8E8575FF49 @@ -0,0 +1,209 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724030ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJ8OA5F0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:04:03 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 82 + 3 Spin_Up_Time POS--- 157 157 024 - 335 (Average 459) + 4 Start_Stop_Count -O--C- 100 100 000 - 53 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 100 100 000 - 1182 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 100 +193 Load_Cycle_Count -O--C- 100 100 000 - 100 +194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 25/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 54031 - +# 2 Short offline Completed without error 00% 54028 - +# 3 Vendor (0xb0) Completed without error 00% 53868 - +# 4 Vendor (0x71) Completed without error 00% 53868 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 30/41 Celsius +Lifetime Min/Max Temperature: 25/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (91) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x018 6 8071670648 --- Logical Sectors Written +0x01 0x020 6 17231417 --- Number of Write Commands +0x01 0x028 6 1851014129 --- Logical Sectors Read +0x01 0x030 6 20515217 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1181 --- Spindle Motor Power-on Hours +0x03 0x010 4 1181 --- Head Flying Hours +0x03 0x018 4 100 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 35 N-- Average Short Term Temperature +0x05 0x018 1 36 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 42 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 497 --- Number of Hardware Resets +0x06 0x010 4 207 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HUS7240/HUS724030ALE641/CAE426B31D3D b/HDD/Hitachi/HUS7240/HUS724030ALE641/CAE426B31D3D new file mode 100644 index 000000000..60f5ae8db --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724030ALE641/CAE426B31D3D @@ -0,0 +1,293 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724030ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJ8OA5F0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:04:00 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 80 + 3 Spin_Up_Time POS--- 155 155 024 - 339 (Average 467) + 4 Start_Stop_Count -O--C- 100 100 000 - 53 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 100 100 000 - 1181 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 88 +193 Load_Cycle_Count -O--C- 100 100 000 - 88 +194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 24/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 93 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 93 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 93 [0] occurred at disk power-on lifetime: 738 hours (30 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 40 00 08:47:49.469 IDENTIFY DEVICE + ec 00 00 00 01 00 00 00 00 00 00 40 ff 08:47:49.362 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 40 00 08:47:19.375 IDENTIFY DEVICE + ec 00 00 00 01 00 00 00 00 00 00 40 ff 08:47:19.269 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 40 00 08:46:49.294 IDENTIFY DEVICE + +Error 92 [3] occurred at disk power-on lifetime: 738 hours (30 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 40 00 08:45:49.051 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 40 00 08:45:49.050 IDENTIFY DEVICE + 60 00 01 00 01 00 00 00 00 00 01 00 ff 08:45:48.942 READ FPDMA QUEUED + 60 00 01 00 01 00 01 5d 50 a3 af 40 ff 08:44:46.070 READ FPDMA QUEUED + 60 00 01 00 10 00 01 5d 50 a3 af 40 00 08:44:16.086 READ FPDMA QUEUED + +Error 91 [2] occurred at disk power-on lifetime: 738 hours (30 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 40 00 08:45:49.050 IDENTIFY DEVICE + 60 00 01 00 01 00 00 00 00 00 01 00 ff 08:45:48.942 READ FPDMA QUEUED + 60 00 01 00 01 00 01 5d 50 a3 af 40 ff 08:44:46.070 READ FPDMA QUEUED + 60 00 01 00 10 00 01 5d 50 a3 af 40 00 08:44:16.086 READ FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 40 00 08:44:16.086 SET FEATURES [Enable write cache] + +Error 90 [1] occurred at disk power-on lifetime: 738 hours (30 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 40 00 08:44:16.082 IDENTIFY DEVICE + ef 00 aa 00 00 00 00 00 00 00 00 00 ff 08:44:15.978 SET FEATURES [Enable read look-ahead] + ef 00 aa 00 00 00 00 00 00 00 00 40 00 08:43:45.954 SET FEATURES [Enable read look-ahead] + ef 00 02 00 00 00 00 00 00 00 00 40 00 08:43:44.552 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 40 00 08:43:44.552 SET FEATURES [Enable read look-ahead] + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 49828 - +# 2 Short offline Completed without error 00% 49825 - +# 3 Vendor (0xb0) Completed without error 00% 49666 - +# 4 Vendor (0x71) Completed without error 00% 49666 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 30/38 Celsius +Lifetime Min/Max Temperature: 24/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (87) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x018 6 8050497568 --- Logical Sectors Written +0x01 0x020 6 16891968 --- Number of Write Commands +0x01 0x028 6 1808589931 --- Logical Sectors Read +0x01 0x030 6 20575852 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1181 --- Spindle Motor Power-on Hours +0x03 0x010 4 1181 --- Head Flying Hours +0x03 0x018 4 88 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 39 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 38 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 940 --- Number of Hardware Resets +0x06 0x010 4 225 --- Number of ASR Events +0x06 0x018 4 93 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUS7240/HUS724030ALE641/EF0CF1CB2AB8 b/HDD/Hitachi/HUS7240/HUS724030ALE641/EF0CF1CB2AB8 new file mode 100644 index 000000000..2fecbc95c --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724030ALE641/EF0CF1CB2AB8 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724030ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJ8OA5F0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:04:01 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 81 + 3 Spin_Up_Time POS--- 162 162 024 - 322 (Average 448) + 4 Start_Stop_Count -O--C- 100 100 000 - 53 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 100 100 000 - 1182 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 88 +193 Load_Cycle_Count -O--C- 100 100 000 - 88 +194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 23/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 53704 - +# 2 Short offline Completed without error 00% 53700 - +# 3 Vendor (0xb0) Completed without error 00% 53544 - +# 4 Vendor (0x71) Completed without error 00% 53544 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 29/37 Celsius +Lifetime Min/Max Temperature: 23/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (122) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x018 6 8106601216 --- Logical Sectors Written +0x01 0x020 6 18320261 --- Number of Write Commands +0x01 0x028 6 1854793510 --- Logical Sectors Read +0x01 0x030 6 20591832 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1181 --- Spindle Motor Power-on Hours +0x03 0x010 4 1181 --- Head Flying Hours +0x03 0x018 4 88 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 39 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 38 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 468 --- Number of Hardware Resets +0x06 0x010 4 207 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUS7240/HUS724040ALE641/03EBDC362C8E b/HDD/Hitachi/HUS7240/HUS724040ALE641/03EBDC362C8E new file mode 100644 index 000000000..fc4b902d5 --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724040ALE641/03EBDC362C8E @@ -0,0 +1,208 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724040ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5F0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:14 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 137 137 054 - 79 + 3 Spin_Up_Time POS--- 155 155 024 - 505 (Average 494) + 4 Start_Stop_Count -O--C- 100 100 000 - 12 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 100 100 000 - 3225 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 12 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 136 +193 Load_Cycle_Count -O--C- 100 100 000 - 136 +194 Temperature_Celsius -O---- 127 127 000 - 47 (Min/Max 20/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 280 - +# 2 Vendor (0xb0) Completed without error 00% 41495 - +# 3 Vendor (0x71) Completed without error 00% 41495 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 35/55 Celsius +Lifetime Min/Max Temperature: 20/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (43) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x018 6 6134876079 --- Logical Sectors Written +0x01 0x020 6 53654144 --- Number of Write Commands +0x01 0x028 6 7153165568 --- Logical Sectors Read +0x01 0x030 6 86026249 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3225 --- Spindle Motor Power-on Hours +0x03 0x010 4 3225 --- Head Flying Hours +0x03 0x018 4 136 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 18 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x010 1 47 N-- Average Short Term Temperature +0x05 0x018 1 45 N-- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 49 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 45 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 405 --- Number of Hardware Resets +0x06 0x010 4 93 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Hitachi/HUS7240/HUS724040ALE641/11C39FF7EA9E b/HDD/Hitachi/HUS7240/HUS724040ALE641/11C39FF7EA9E new file mode 100644 index 000000000..058d064cd --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724040ALE641/11C39FF7EA9E @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724040ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5F0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:05 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 137 137 054 - 79 + 3 Spin_Up_Time POS--- 153 153 024 - 507 (Average 505) + 4 Start_Stop_Count -O--C- 100 100 000 - 14 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 100 100 000 - 3227 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 127 +193 Load_Cycle_Count -O--C- 100 100 000 - 127 +194 Temperature_Celsius -O---- 136 136 000 - 44 (Min/Max 21/52) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 282 - +# 2 Vendor (0xb0) Completed without error 00% 41495 - +# 3 Vendor (0x71) Completed without error 00% 41495 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 36/52 Celsius +Lifetime Min/Max Temperature: 21/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (102) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 6135608151 --- Logical Sectors Written +0x01 0x020 6 53200410 --- Number of Write Commands +0x01 0x028 6 7111959532 --- Logical Sectors Read +0x01 0x030 6 88036778 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3226 --- Spindle Motor Power-on Hours +0x03 0x010 4 3226 --- Head Flying Hours +0x03 0x018 4 127 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 44 --- Current Temperature +0x05 0x010 1 44 N-- Average Short Term Temperature +0x05 0x018 1 43 N-- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 46 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 43 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 120 --- Number of Hardware Resets +0x06 0x010 4 47 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUS7240/HUS724040ALE641/2D41A9C9CB00 b/HDD/Hitachi/HUS7240/HUS724040ALE641/2D41A9C9CB00 new file mode 100644 index 000000000..c18329d30 --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724040ALE641/2D41A9C9CB00 @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724040ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5F0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 81 + 3 Spin_Up_Time POS--- 155 155 024 - 500 (Average 500) + 4 Start_Stop_Count -O--C- 100 100 000 - 14 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 100 100 000 - 3227 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 174 +193 Load_Cycle_Count -O--C- 100 100 000 - 174 +194 Temperature_Celsius -O---- 136 136 000 - 44 (Min/Max 21/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 282 - +# 2 Vendor (0xb0) Completed without error 00% 40980 - +# 3 Vendor (0x71) Completed without error 00% 40980 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 35/51 Celsius +Lifetime Min/Max Temperature: 21/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (34) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 6134920543 --- Logical Sectors Written +0x01 0x020 6 53719477 --- Number of Write Commands +0x01 0x028 6 7120859789 --- Logical Sectors Read +0x01 0x030 6 87552033 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3226 --- Spindle Motor Power-on Hours +0x03 0x010 4 3226 --- Head Flying Hours +0x03 0x018 4 174 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 44 --- Current Temperature +0x05 0x010 1 44 N-- Average Short Term Temperature +0x05 0x018 1 42 N-- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 46 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 42 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 278 --- Number of Hardware Resets +0x06 0x010 4 107 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUS7240/HUS724040ALE641/65C4B02B32ED b/HDD/Hitachi/HUS7240/HUS724040ALE641/65C4B02B32ED new file mode 100644 index 000000000..cfc981d6c --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724040ALE641/65C4B02B32ED @@ -0,0 +1,292 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724040ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5F0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:10 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 82 + 3 Spin_Up_Time POS--- 150 150 024 - 515 (Average 513) + 4 Start_Stop_Count -O--C- 100 100 000 - 14 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 100 100 000 - 3227 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 124 +193 Load_Cycle_Count -O--C- 100 100 000 - 124 +194 Temperature_Celsius -O---- 122 122 000 - 49 (Min/Max 20/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 10 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 10 [1] occurred at disk power-on lifetime: 37585 hours (1566 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 e8 00 01 c8 a7 4b 38 08 00 Error: UNC 232 sectors at LBA = 0x1c8a74b38 = 7661374264 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 04 00 00 01 c8 a7 48 20 40 00 1d+20:49:23.706 READ DMA EXT + 25 00 00 03 e0 00 01 c8 a7 4c 20 40 00 1d+20:49:23.683 READ DMA EXT + 25 00 00 04 00 00 01 c8 a7 48 20 40 00 1d+20:49:20.400 READ DMA EXT + 25 00 00 00 20 00 01 c8 1b ed 30 40 00 1d+20:49:20.400 READ DMA EXT + 25 00 00 00 08 00 00 14 67 42 a0 40 00 1d+20:49:20.345 READ DMA EXT + +Error 9 [0] occurred at disk power-on lifetime: 37585 hours (1566 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 e8 00 01 c8 a7 4b 38 08 00 Error: UNC 232 sectors at LBA = 0x1c8a74b38 = 7661374264 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 04 00 00 01 c8 a7 48 20 40 00 1d+20:49:20.400 READ DMA EXT + 25 00 00 00 20 00 01 c8 1b ed 30 40 00 1d+20:49:20.400 READ DMA EXT + 25 00 00 00 08 00 00 14 67 42 a0 40 00 1d+20:49:20.345 READ DMA EXT + 25 00 00 04 00 00 00 14 67 3e a0 40 00 1d+20:49:20.342 READ DMA EXT + 25 00 00 04 00 00 00 14 67 3a a0 40 00 1d+20:49:20.303 READ DMA EXT + +Error 8 [3] occurred at disk power-on lifetime: 34910 hours (1454 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 70 00 00 23 05 53 c0 03 00 Error: UNC 112 sectors at LBA = 0x230553c0 = 587551680 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 00 23 05 53 30 40 00 2d+15:07:28.872 READ DMA EXT + 35 00 00 00 20 00 00 00 08 6b a0 40 00 2d+15:07:28.872 WRITE DMA EXT + 25 00 00 01 00 00 00 23 05 53 30 40 00 2d+15:07:26.348 READ DMA EXT + 35 00 00 02 c8 00 00 23 75 71 d8 40 00 2d+15:07:26.347 WRITE DMA EXT + 35 00 00 00 08 00 00 4d 5b fe 90 40 00 2d+15:07:26.347 WRITE DMA EXT + +Error 7 [2] occurred at disk power-on lifetime: 34910 hours (1454 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 70 00 00 23 05 53 c0 03 00 Error: UNC 112 sectors at LBA = 0x230553c0 = 587551680 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 00 23 05 53 30 40 00 2d+15:07:26.348 READ DMA EXT + 35 00 00 02 c8 00 00 23 75 71 d8 40 00 2d+15:07:26.347 WRITE DMA EXT + 35 00 00 00 08 00 00 4d 5b fe 90 40 00 2d+15:07:26.347 WRITE DMA EXT + 35 00 00 03 f8 00 00 62 11 d3 d8 40 00 2d+15:07:26.344 WRITE DMA EXT + 35 00 00 04 00 00 00 62 11 cf d8 40 00 2d+15:07:26.342 WRITE DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 282 - +# 2 Vendor (0xb0) Completed without error 00% 41562 - +# 3 Vendor (0x71) Completed without error 00% 41561 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 49 Celsius +Power Cycle Min/Max Temperature: 35/57 Celsius +Lifetime Min/Max Temperature: 20/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (41) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 6135032871 --- Logical Sectors Written +0x01 0x020 6 53504494 --- Number of Write Commands +0x01 0x028 6 7111242545 --- Logical Sectors Read +0x01 0x030 6 87993177 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3226 --- Spindle Motor Power-on Hours +0x03 0x010 4 3226 --- Head Flying Hours +0x03 0x018 4 124 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 38 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 49 --- Current Temperature +0x05 0x010 1 49 N-- Average Short Term Temperature +0x05 0x018 1 47 N-- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 51 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 47 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 295 --- Number of Hardware Resets +0x06 0x010 4 107 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUS7240/HUS724040ALE641/6D3DB4602DAA b/HDD/Hitachi/HUS7240/HUS724040ALE641/6D3DB4602DAA new file mode 100644 index 000000000..94f33447a --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724040ALE641/6D3DB4602DAA @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724040ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5F0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:12 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 81 + 3 Spin_Up_Time POS--- 168 168 024 - 423 (Average 496) + 4 Start_Stop_Count -O--C- 100 100 000 - 15 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 100 100 000 - 3227 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 124 +193 Load_Cycle_Count -O--C- 100 100 000 - 124 +194 Temperature_Celsius -O---- 115 115 000 - 52 (Min/Max 21/61) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 282 - +# 2 Vendor (0xb0) Completed without error 00% 41571 - +# 3 Vendor (0x71) Completed without error 00% 41570 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 52 Celsius +Power Cycle Min/Max Temperature: 38/61 Celsius +Lifetime Min/Max Temperature: 21/61 Celsius +Under/Over Temperature Limit Count: 0/1 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (79) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 6136461471 --- Logical Sectors Written +0x01 0x020 6 52655639 --- Number of Write Commands +0x01 0x028 6 7149470691 --- Logical Sectors Read +0x01 0x030 6 86254819 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3226 --- Spindle Motor Power-on Hours +0x03 0x010 4 3226 --- Head Flying Hours +0x03 0x018 4 124 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 37 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 52 --- Current Temperature +0x05 0x010 1 52 N-- Average Short Term Temperature +0x05 0x018 1 50 N-- Average Long Term Temperature +0x05 0x020 1 61 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 54 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 50 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 408 --- Number of Hardware Resets +0x06 0x010 4 107 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUS7240/HUS724040ALE641/81E64C1156E5 b/HDD/Hitachi/HUS7240/HUS724040ALE641/81E64C1156E5 new file mode 100644 index 000000000..1c2fa895d --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724040ALE641/81E64C1156E5 @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724040ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5F0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:11 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 82 + 3 Spin_Up_Time POS--- 158 158 024 - 449 (Average 532) + 4 Start_Stop_Count -O--C- 100 100 000 - 15 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 100 100 000 - 3227 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 127 +193 Load_Cycle_Count -O--C- 100 100 000 - 127 +194 Temperature_Celsius -O---- 113 113 000 - 53 (Min/Max 21/62) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 282 - +# 2 Vendor (0xb0) Completed without error 00% 41525 - +# 3 Vendor (0x71) Completed without error 00% 41525 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 53 Celsius +Power Cycle Min/Max Temperature: 39/62 Celsius +Lifetime Min/Max Temperature: 21/62 Celsius +Under/Over Temperature Limit Count: 0/24 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (109) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 6134750511 --- Logical Sectors Written +0x01 0x020 6 53703215 --- Number of Write Commands +0x01 0x028 6 7080815119 --- Logical Sectors Read +0x01 0x030 6 89513028 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3226 --- Spindle Motor Power-on Hours +0x03 0x010 4 3226 --- Head Flying Hours +0x03 0x018 4 127 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 7 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 53 --- Current Temperature +0x05 0x010 1 53 N-- Average Short Term Temperature +0x05 0x018 1 51 N-- Average Long Term Temperature +0x05 0x020 1 62 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 56 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 51 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 20 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 356 --- Number of Hardware Resets +0x06 0x010 4 107 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUS7240/HUS724040ALE641/BB4AFB237D62 b/HDD/Hitachi/HUS7240/HUS724040ALE641/BB4AFB237D62 new file mode 100644 index 000000000..abf9411e5 --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724040ALE641/BB4AFB237D62 @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724040ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5F0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:09 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 80 + 3 Spin_Up_Time POS--- 157 157 024 - 493 (Average 491) + 4 Start_Stop_Count -O--C- 100 100 000 - 14 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 121 121 020 - 34 + 9 Power_On_Hours -O--C- 100 100 000 - 3227 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 123 +193 Load_Cycle_Count -O--C- 100 100 000 - 123 +194 Temperature_Celsius -O---- 130 130 000 - 46 (Min/Max 21/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 282 - +# 2 Vendor (0xb0) Completed without error 00% 40968 - +# 3 Vendor (0x71) Completed without error 00% 40968 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 34/54 Celsius +Lifetime Min/Max Temperature: 21/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (123) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 6134883119 --- Logical Sectors Written +0x01 0x020 6 53668829 --- Number of Write Commands +0x01 0x028 6 7134771852 --- Logical Sectors Read +0x01 0x030 6 86894441 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3226 --- Spindle Motor Power-on Hours +0x03 0x010 4 3226 --- Head Flying Hours +0x03 0x018 4 123 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 46 --- Current Temperature +0x05 0x010 1 45 N-- Average Short Term Temperature +0x05 0x018 1 44 N-- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 48 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 44 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 228 --- Number of Hardware Resets +0x06 0x010 4 107 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Hitachi/HUS7240/HUS724040ALE641/CC921752B6DA b/HDD/Hitachi/HUS7240/HUS724040ALE641/CC921752B6DA new file mode 100644 index 000000000..495b36b33 --- /dev/null +++ b/HDD/Hitachi/HUS7240/HUS724040ALE641/CC921752B6DA @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Hitachi/HGST Ultrastar 7K4000 +Device Model: HUS724040ALE641 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: MJAOA5F0 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:07 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 24) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 83 + 3 Spin_Up_Time POS--- 157 157 024 - 493 (Average 493) + 4 Start_Stop_Count -O--C- 100 100 000 - 14 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 119 119 020 - 35 + 9 Power_On_Hours -O--C- 100 100 000 - 3227 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 14 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 127 +193 Load_Cycle_Count -O--C- 100 100 000 - 127 +194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 21/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80 GPL R/W 63 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xb2 GPL VS 63 Device vendor specific log +0xc8 GPL VS 617 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 282 - +# 2 Vendor (0xb0) Completed without error 00% 41070 - +# 3 Vendor (0x71) Completed without error 00% 41070 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 32/49 Celsius +Lifetime Min/Max Temperature: 21/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (89) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x018 6 6135036919 --- Logical Sectors Written +0x01 0x020 6 53660678 --- Number of Write Commands +0x01 0x028 6 7128420866 --- Logical Sectors Read +0x01 0x030 6 87181348 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3226 --- Spindle Motor Power-on Hours +0x03 0x010 4 3226 --- Head Flying Hours +0x03 0x018 4 127 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 32 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 42 N-- Average Short Term Temperature +0x05 0x018 1 41 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 44 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 41 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 195 --- Number of Hardware Resets +0x06 0x010 4 107 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/IBM/DBCA/DBCA-204860/ACCC07D9A095 b/HDD/IBM/DBCA/DBCA-204860/ACCC07D9A095 new file mode 100644 index 000000000..401bbb41c --- /dev/null +++ b/HDD/IBM/DBCA/DBCA-204860/ACCC07D9A095 @@ -0,0 +1,69 @@ +smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: IBM Travelstar 6GN +Device Model: IBM-DBCA-204860 +Serial Number: -- +Firmware Version: BC3UA82F +User Capacity: 4,308,595,200 bytes [4.30 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-4 T13/1153D revision 17 +Local Time is: Mon Oct 19 16:58:22 2020 +10 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 750) seconds. +Offline data collection +capabilities: (0x05) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + No Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + No General Purpose Logging support. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 + 3 Spin_Up_Time 0x0007 115 115 033 Pre-fail Always - 1 + 4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 2876 + 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0012 072 072 000 Old_age Always - 12541 + 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1826 +199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 +220 Disk_Shift 0x0026 099 099 000 Old_age Always - 200423 +221 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 +222 Loaded_Hours 0x0012 095 095 000 Old_age Always - 2431 +223 Load_Retry_Count 0x000b 100 100 050 Pre-fail Always - 0 +225 Load_Cycle_Count 0x0012 070 070 050 Old_age Always - 307513 +226 Load-in_Time 0x0007 116 116 040 Pre-fail Always - 584124334083 +227 Torq-amp_Count 0x0032 100 100 000 Old_age Always - 0 +228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 61 + +SMART Error Log not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + diff --git a/HDD/Maxtor/6E040/6E040L0/425A9F3EF9EE b/HDD/Maxtor/6E040/6E040L0/425A9F3EF9EE new file mode 100644 index 000000000..5f536d5cc --- /dev/null +++ b/HDD/Maxtor/6E040/6E040L0/425A9F3EF9EE @@ -0,0 +1,230 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE-p3 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Maxtor DiamondMax Plus 8 +Device Model: Maxtor 6E040L0 +Serial Number: -- +Firmware Version: NAR61HA0 +User Capacity: 41,109,061,120 bytes [41.1 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 +Local Time is: Sat Oct 31 01:50:43 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +See vendor-specific Attribute list for failed Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 64) The previous self-test completed having + a test element that failed and the test + element that failed is not known. +Total time to complete Offline +data collection: ( 1021) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 17) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time POS--K 223 220 063 - 12024 + 4 Start_Stop_Count -O--CK 253 253 000 - 795 + 5 Reallocated_Sector_Ct PO--CK 001 001 063 NOW 1276 + 6 Read_Channel_Margin P----- 253 253 100 - 0 + 7 Seek_Error_Rate -O-R-- 253 252 000 - 0 + 8 Seek_Time_Performance POS--K 248 237 187 - 63110 + 9 Power_On_Minutes -O--CK 202 202 000 - 488h+14m + 10 Spin_Retry_Count PO-R-K 253 252 157 - 0 + 11 Calibration_Retry_Count PO-R-K 253 252 223 - 0 + 12 Power_Cycle_Count -O--CK 251 251 000 - 796 +192 Power-Off_Retract_Count -O--CK 253 253 000 - 685 +193 Load_Cycle_Count -O--CK 253 253 000 - 3236 +194 Temperature_Celsius -O--CK 253 253 000 - 42 +195 Hardware_ECC_Recovered -O-R-- 253 247 000 - 19409 +196 Reallocated_Event_Count ---R-- 250 250 000 - 3 +197 Current_Pending_Sector ---R-- 232 220 000 - 109 +198 Offline_Uncorrectable ---R-- 253 178 000 - 0 +199 UDMA_CRC_Error_Count ---R-- 199 199 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 253 246 000 - 11 +202 Data_Address_Mark_Errs -O-R-- 253 081 000 - 0 +203 Run_Out_Cancel PO-R-- 253 244 180 - 44 +204 Soft_ECC_Correction -O-R-- 253 234 000 - 0 +205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0 +207 Spin_High_Current -O-R-K 253 252 000 - 0 +208 Spin_Buzz -O-R-K 253 252 000 - 0 +209 Offline_Seek_Performnce --S--K 187 187 000 - 0 + 99 Unknown_Attribute --S--- 253 253 000 - 0 +100 Unknown_Attribute --S--- 253 253 000 - 0 +101 Unknown_Attribute --S--- 253 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +Warning: ATA error count 9907 inconsistent with error log pointer 5 + +ATA Error Count: 9907 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 9907 occurred at disk power-on lifetime: 16785 hours (699 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 00 1f 74 e9 e1 Error: ICRC, ABRT at LBA = 0x01e9741f = 32076831 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 20 1f 74 e9 e1 08 00:04:24.064 READ DMA + c8 00 80 9f 73 e9 e1 08 00:04:24.064 READ DMA + c8 00 80 1f 73 e9 e1 08 00:04:24.064 READ DMA + c8 00 80 9f 72 e9 e1 08 00:04:24.016 READ DMA + c8 00 40 5f 72 e9 e1 08 00:04:24.016 READ DMA + +Error 9906 occurred at disk power-on lifetime: 16785 hours (699 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 08 80 2c c9 e4 Error: UNC 8 sectors at LBA = 0x04c92c80 = 80292992 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 80 2c c9 e4 08 00:17:25.040 READ DMA + f8 00 00 00 00 00 e0 08 00:17:25.040 READ NATIVE MAX ADDRESS [OBS-ACS-3] + ec 00 00 00 00 00 a0 0a 00:17:25.040 IDENTIFY DEVICE + ef 03 46 00 00 00 a0 0a 00:17:25.040 SET FEATURES [Set transfer mode] + f8 00 00 00 00 00 e0 08 00:17:25.040 READ NATIVE MAX ADDRESS [OBS-ACS-3] + +Error 9905 occurred at disk power-on lifetime: 16785 hours (699 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 08 80 2c c9 e4 Error: UNC 8 sectors at LBA = 0x04c92c80 = 80292992 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 80 2c c9 e4 08 00:17:22.752 READ DMA + f8 00 00 00 00 00 e0 08 00:17:22.736 READ NATIVE MAX ADDRESS [OBS-ACS-3] + ec 00 00 00 00 00 a0 0a 00:17:22.736 IDENTIFY DEVICE + ef 03 46 00 00 00 a0 0a 00:17:22.720 SET FEATURES [Set transfer mode] + f8 00 00 00 00 00 e0 08 00:17:22.720 READ NATIVE MAX ADDRESS [OBS-ACS-3] + +Error 9904 occurred at disk power-on lifetime: 16785 hours (699 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 08 80 2c c9 e4 Error: UNC 8 sectors at LBA = 0x04c92c80 = 80292992 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 80 2c c9 e4 08 00:17:20.464 READ DMA + f8 00 00 00 00 00 e0 08 00:17:20.464 READ NATIVE MAX ADDRESS [OBS-ACS-3] + ec 00 00 00 00 00 a0 0a 00:17:20.464 IDENTIFY DEVICE + ef 03 46 00 00 00 a0 0a 00:17:20.464 SET FEATURES [Set transfer mode] + f8 00 00 00 00 00 e0 08 00:17:20.464 READ NATIVE MAX ADDRESS [OBS-ACS-3] + +Error 9903 occurred at disk power-on lifetime: 16785 hours (699 days + 9 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 08 80 2c c9 e4 Error: UNC 8 sectors at LBA = 0x04c92c80 = 80292992 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 80 2c c9 e4 08 00:17:18.176 READ DMA + f8 00 00 00 00 00 e0 08 00:17:18.160 READ NATIVE MAX ADDRESS [OBS-ACS-3] + ec 00 00 00 00 00 a0 0a 00:17:18.144 IDENTIFY DEVICE + ef 03 46 00 00 00 a0 0a 00:17:18.144 SET FEATURES [Set transfer mode] + f8 00 00 00 00 00 e0 08 00:17:18.144 READ NATIVE MAX ADDRESS [OBS-ACS-3] + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed: unknown failure 00% 16818 0 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/HDD/Maxtor/6Y080/6Y080P0/582C2158BBE4 b/HDD/Maxtor/6Y080/6Y080P0/582C2158BBE4 new file mode 100644 index 000000000..fe1a28f39 --- /dev/null +++ b/HDD/Maxtor/6Y080/6Y080P0/582C2158BBE4 @@ -0,0 +1,225 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Maxtor DiamondMax Plus 9 +Device Model: Maxtor 6Y080P0 +Serial Number: -- +Firmware Version: YAR41BW0 +User Capacity: 81,963,220,480 bytes [81.9 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 +Local Time is: Wed Oct 21 08:40:04 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 192 +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 241) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 37) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time POS--K 200 200 063 - 15855 + 4 Start_Stop_Count -O--CK 252 252 000 - 2173 + 5 Reallocated_Sector_Ct PO--CK 253 253 063 - 1 + 6 Read_Channel_Margin P----- 253 253 100 - 0 + 7 Seek_Error_Rate -O-R-- 253 242 000 - 0 + 8 Seek_Time_Performance POS--K 253 240 187 - 39652 + 9 Power_On_Minutes -O--CK 225 225 000 - 71h+33m + 10 Spin_Retry_Count PO-R-K 253 252 157 - 0 + 11 Calibration_Retry_Count PO-R-K 253 252 223 - 0 + 12 Power_Cycle_Count -O--CK 246 246 000 - 2928 +192 Power-Off_Retract_Count -O--CK 253 253 000 - 0 +193 Load_Cycle_Count -O--CK 253 253 000 - 0 +194 Temperature_Celsius -O--CK 253 253 000 - 19 +195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 1739 +196 Reallocated_Event_Count ---R-- 253 253 000 - 0 +197 Current_Pending_Sector ---R-- 253 253 000 - 0 +198 Offline_Uncorrectable ---R-- 253 253 000 - 0 +199 UDMA_CRC_Error_Count ---R-- 185 144 000 - 54 +200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 253 243 000 - 11 +202 Data_Address_Mark_Errs -O-R-- 253 249 000 - 0 +203 Run_Out_Cancel PO-R-- 253 252 180 - 3 +204 Soft_ECC_Correction -O-R-- 253 252 000 - 0 +205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0 +207 Spin_High_Current -O-R-K 253 252 000 - 0 +208 Spin_Buzz -O-R-K 253 252 000 - 0 +209 Offline_Seek_Performnce --S--K 197 197 000 - 0 + 99 Unknown_Attribute --S--- 253 253 000 - 0 +100 Unknown_Attribute --S--- 253 253 000 - 0 +101 Unknown_Attribute --S--- 253 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +ATA Error Count: 145 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 145 occurred at disk power-on lifetime: 8532 hours (355 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 00 da e0 ba e0 Error: ICRC, ABRT at LBA = 0x00bae0da = 12247258 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 80 da e0 ba e0 00 02:36:43.168 READ DMA + c8 00 80 c2 a6 bd e0 00 02:36:43.168 READ DMA + c8 00 30 e2 52 bd e0 00 02:36:43.168 READ DMA + c8 00 80 f2 6e bd e0 00 02:36:43.152 READ DMA + c8 00 58 e2 5e bd e0 00 02:36:43.152 READ DMA + +Error 144 occurred at disk power-on lifetime: 8532 hours (355 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 00 e2 07 bf e0 Error: ICRC, ABRT at LBA = 0x00bf07e2 = 12519394 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 48 e2 07 bf e0 00 02:36:41.296 READ DMA + c8 00 48 e2 07 bf e0 00 02:36:41.216 READ DMA + ca 00 40 a2 67 01 e0 00 02:36:41.200 WRITE DMA + ca 00 38 6a 5f 01 e0 00 02:36:41.200 WRITE DMA + ca 00 38 ea 5e 00 e0 00 02:36:41.200 WRITE DMA + +Error 143 occurred at disk power-on lifetime: 8532 hours (355 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 00 e2 07 bf e0 Error: ICRC, ABRT at LBA = 0x00bf07e2 = 12519394 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 48 e2 07 bf e0 00 02:36:41.216 READ DMA + ca 00 40 a2 67 01 e0 00 02:36:41.200 WRITE DMA + ca 00 38 6a 5f 01 e0 00 02:36:41.200 WRITE DMA + ca 00 38 ea 5e 00 e0 00 02:36:41.200 WRITE DMA + ca 00 08 ea 5e 00 e0 00 02:36:41.200 WRITE DMA + +Error 142 occurred at disk power-on lifetime: 8532 hours (355 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 00 e2 07 bf e0 Error: ICRC, ABRT at LBA = 0x00bf07e2 = 12519394 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 48 e2 07 bf e0 00 02:36:41.136 READ DMA + c8 00 48 e2 07 bf e0 00 02:36:41.072 READ DMA + c8 00 48 e2 07 bf e0 00 02:36:41.024 READ DMA + c8 00 48 e2 07 bf e0 00 02:36:40.960 READ DMA + c8 00 48 e2 07 bf e0 00 02:36:40.912 READ DMA + +Error 141 occurred at disk power-on lifetime: 8532 hours (355 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 00 e2 07 bf e0 Error: ICRC, ABRT at LBA = 0x00bf07e2 = 12519394 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 48 e2 07 bf e0 00 02:36:41.072 READ DMA + c8 00 48 e2 07 bf e0 00 02:36:41.024 READ DMA + c8 00 48 e2 07 bf e0 00 02:36:40.960 READ DMA + c8 00 48 e2 07 bf e0 00 02:36:40.912 READ DMA + c8 00 08 4a 08 bf e0 00 02:36:40.912 READ DMA + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/HDD/Maxtor/6Y080/6Y080P0/D830F3533A5B b/HDD/Maxtor/6Y080/6Y080P0/D830F3533A5B new file mode 100644 index 000000000..fb21a195f --- /dev/null +++ b/HDD/Maxtor/6Y080/6Y080P0/D830F3533A5B @@ -0,0 +1,132 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Maxtor DiamondMax Plus 9 +Device Model: Maxtor 6Y080P0 +Serial Number: -- +Firmware Version: YAR41BW0 +User Capacity: 81,964,302,336 bytes [81.9 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 +Local Time is: Wed Oct 21 08:40:03 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 192 +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 118) The previous self-test completed having + the read element of the test failed. +Total time to complete Offline +data collection: ( 241) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 37) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time POS--K 225 225 063 - 11169 + 4 Start_Stop_Count -O--CK 253 253 000 - 696 + 5 Reallocated_Sector_Ct PO--CK 253 253 063 - 0 + 6 Read_Channel_Margin P----- 253 253 100 - 0 + 7 Seek_Error_Rate -O-R-- 253 250 000 - 0 + 8 Seek_Time_Performance POS--K 249 239 187 - 57843 + 9 Power_On_Minutes -O--CK 218 218 000 - 408h+43m + 10 Spin_Retry_Count PO-R-K 253 252 157 - 0 + 11 Calibration_Retry_Count PO-R-K 253 252 223 - 0 + 12 Power_Cycle_Count -O--CK 249 249 000 - 1673 +192 Power-Off_Retract_Count -O--CK 253 253 000 - 0 +193 Load_Cycle_Count -O--CK 253 253 000 - 0 +194 Temperature_Celsius -O--CK 253 253 000 - 30 +195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 4946 +196 Reallocated_Event_Count ---R-- 253 253 000 - 0 +197 Current_Pending_Sector ---R-- 253 253 000 - 0 +198 Offline_Uncorrectable ---R-- 252 252 000 - 1 +199 UDMA_CRC_Error_Count ---R-- 199 199 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 253 246 000 - 1 +202 Data_Address_Mark_Errs -O-R-- 253 252 000 - 0 +203 Run_Out_Cancel PO-R-- 253 252 180 - 0 +204 Soft_ECC_Correction -O-R-- 253 252 000 - 0 +205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0 +207 Spin_High_Current -O-R-K 253 252 000 - 0 +208 Spin_Buzz -O-R-K 253 252 000 - 0 +209 Offline_Seek_Performnce --S--K 196 196 000 - 0 + 99 Unknown_Attribute --S--- 253 253 000 - 0 +100 Unknown_Attribute --S--- 253 253 000 - 0 +101 Unknown_Attribute --S--- 253 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed: read failure 60% 10873 6166274 +# 2 Short offline Completed: read failure 60% 10648 6166274 +# 3 Short offline Completed: read failure 60% 10625 6166274 +# 4 Short offline Completed: read failure 60% 10610 6166274 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/HDD/Maxtor/STM3250/STM3250310AS/2A15E5939A7B b/HDD/Maxtor/STM3250/STM3250310AS/2A15E5939A7B new file mode 100644 index 000000000..63947a1d8 --- /dev/null +++ b/HDD/Maxtor/STM3250/STM3250310AS/2A15E5939A7B @@ -0,0 +1,85 @@ +smartctl 7.0 2018-12-30 r4883 [NetBSD 9.0_STABLE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Maxtor DiamondMax 21 +Device Model: MAXTOR STM3250310AS +Serial Number: -- +Firmware Version: 3.AAC +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Sat Aug 29 10:40:19 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 92) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 228271350 + 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1503 + 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 133049534 + 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 3374 + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1473 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 072 050 045 Old_age Always - 28 (Min/Max 22/28) +194 Temperature_Celsius 0x0022 028 050 000 Old_age Always - 28 (0 15 0 0 0) +195 Hardware_ECC_Recovered 0x001a 096 053 000 Old_age Always - 215673261 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 +202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Samsung/HD103/HD103SJ/4691FD23A459 b/HDD/Samsung/HD103/HD103SJ/4691FD23A459 new file mode 100644 index 000000000..9bffa553b --- /dev/null +++ b/HDD/Samsung/HD103/HD103SJ/4691FD23A459 @@ -0,0 +1,238 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F3 +Device Model: SAMSUNG HD103SJ +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AJ10001 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Oct 22 22:27:49 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9180) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 153) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 2 + 2 Throughput_Performance -OS--K 252 252 000 - 0 + 3 Spin_Up_Time PO---K 070 070 025 - 9166 + 4 Start_Stop_Count -O--CK 100 100 000 - 295 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 59677 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 182 +191 G-Sense_Error_Rate -O---K 252 252 000 - 0 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +194 Temperature_Celsius -O---- 064 055 000 - 35 (Min/Max 18/48) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 252 252 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 2 +200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 4382 +223 Load_Retry_Count -O--CK 252 252 000 - 0 +225 Load_Cycle_Count -O--CK 100 100 000 - 303 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 13666 hours (569 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 7c 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 31744 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 04 00 00 00 01 51 78 00 e0 08 00:41:55.121 WRITE DMA EXT + 35 00 00 04 00 00 00 01 51 74 00 e0 08 00:41:55.121 WRITE DMA EXT + 35 00 00 04 00 00 00 01 51 70 00 e0 08 00:41:55.121 WRITE DMA EXT + 35 00 00 04 00 00 00 01 51 6c 00 e0 08 00:41:55.121 WRITE DMA EXT + 35 00 00 04 00 00 00 01 51 68 00 e0 08 00:41:55.121 WRITE DMA EXT + +Error 1 [0] occurred at disk power-on lifetime: 9520 hours (396 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 5a 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 23040 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 04 00 00 00 08 88 56 00 e0 08 00:00:03.241 WRITE DMA EXT + 35 00 00 03 80 00 00 08 88 52 80 e0 08 00:00:03.241 WRITE DMA EXT + 35 00 00 04 00 00 00 08 88 4e 80 e0 08 00:00:03.241 WRITE DMA EXT + 35 00 00 04 00 00 00 08 88 4a 80 e0 08 00:00:03.241 WRITE DMA EXT + 35 00 00 04 00 00 00 08 88 46 80 e0 08 00:00:03.241 WRITE DMA EXT + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 22/35 Celsius +Lifetime Min/Max Temperature: 20/67 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 5 minutes +Temperature Logging Interval: 5 minutes +Min/Max recommended Temperature: -5/80 Celsius +Min/Max Temperature Limit: -10/85 Celsius +Temperature History Size (Index): 128 (110) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 34 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 34 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8e00 4 0 Vendor specific +0x8e01 4 0 Vendor specific +0x8e02 4 0 Vendor specific +0x8e03 4 0 Vendor specific +0x8e04 4 0 Vendor specific +0x8e05 4 0 Vendor specific +0x8e06 4 0 Vendor specific +0x8e07 4 0 Vendor specific +0x8e08 4 0 Vendor specific +0x8e09 4 0 Vendor specific +0x8e0a 4 0 Vendor specific +0x8e0b 4 0 Vendor specific +0x8e0c 4 0 Vendor specific +0x8e0d 4 0 Vendor specific +0x8e0e 4 0 Vendor specific +0x8e0f 4 0 Vendor specific +0x8e10 4 0 Vendor specific +0x8e11 4 0 Vendor specific + diff --git a/HDD/Samsung/HD103/HD103SJ/72016DDA9B68 b/HDD/Samsung/HD103/HD103SJ/72016DDA9B68 new file mode 100644 index 000000000..104d11d53 --- /dev/null +++ b/HDD/Samsung/HD103/HD103SJ/72016DDA9B68 @@ -0,0 +1,135 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F3 +Device Model: SAMSUNG HD103SJ +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AJ10001 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Tue Nov 3 11:51:06 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9240) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 154) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 40 + 2 Throughput_Performance -OS--K 252 252 000 - 0 + 3 Spin_Up_Time PO---K 071 067 025 - 8828 + 4 Start_Stop_Count -O--CK 100 100 000 - 100 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 85818 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 1 + 12 Power_Cycle_Count -O--CK 100 100 000 - 117 +191 G-Sense_Error_Rate -O---K 100 100 000 - 1 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +194 Temperature_Celsius -O---- 064 047 000 - 33 (Min/Max 17/53) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 252 252 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 10702 +223 Load_Retry_Count -O--CK 100 100 000 - 1 +225 Load_Cycle_Count -O--CK 100 100 000 - 124 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error +Read SMART Extended Self-test Log failed + +Read SMART Self-test Log failed: cam_send_ccb failed + +Read SMART Selective Self-test Log failed: cam_send_ccb failed + +Read SCT Status failed: cam_send_ccb failed + +Read SCT Status failed: cam_send_ccb failed +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: cam_send_ccb failed +Read SATA Phy Event Counters failed + + + diff --git a/HDD/Samsung/HD103/HD103SJ/B284A262C96E b/HDD/Samsung/HD103/HD103SJ/B284A262C96E new file mode 100644 index 000000000..e33f6b6fa --- /dev/null +++ b/HDD/Samsung/HD103/HD103SJ/B284A262C96E @@ -0,0 +1,326 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F3 +Device Model: SAMSUNG HD103SJ +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AJ10001 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Oct 22 22:27:48 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9000) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 150) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 187 + 2 Throughput_Performance -OS--K 252 252 000 - 0 + 3 Spin_Up_Time PO---K 070 070 025 - 9127 + 4 Start_Stop_Count -O--CK 100 100 000 - 181 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 59722 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 183 +191 G-Sense_Error_Rate -O---K 100 100 000 - 9 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +194 Temperature_Celsius -O---- 064 060 000 - 32 (Min/Max 17/46) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 252 252 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 5 +200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 13 +223 Load_Retry_Count -O--CK 252 252 000 - 0 +225 Load_Cycle_Count -O--CK 100 100 000 - 189 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 7 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 7 [6] occurred at disk power-on lifetime: 44825 hours (1867 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 6f 78 9e 30 40 00 Error: UNC at LBA = 0x6f789e30 = 1870175792 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 6f 78 9e 30 40 08 09:23:00.018 READ FPDMA QUEUED + 61 00 00 00 08 00 00 4b fb 43 e0 40 08 09:23:00.018 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 70 93 21 c8 40 08 09:23:00.018 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 6e 2d 44 d0 40 08 09:23:00.018 WRITE FPDMA QUEUED + 60 00 00 00 08 00 00 6f 78 9e 30 40 08 09:23:00.018 READ FPDMA QUEUED + +Error 6 [5] occurred at disk power-on lifetime: 29846 hours (1243 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 10 00 00 6e c2 8b f0 40 00 Error: UNC at LBA = 0x6ec28bf0 = 1858243568 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 00 6e c2 8c 00 40 08 03:43:18.127 READ FPDMA QUEUED + 60 00 00 00 80 00 00 6e c2 8b 80 40 08 03:43:18.125 READ FPDMA QUEUED + 60 00 00 00 80 00 00 6e c2 8b 80 40 08 03:43:18.125 READ FPDMA QUEUED + 60 00 00 00 80 00 00 6e c2 8b 00 40 08 03:43:18.125 READ FPDMA QUEUED + 60 00 00 00 80 00 00 6e c2 8a 80 40 08 03:43:18.125 READ FPDMA QUEUED + +Error 5 [4] occurred at disk power-on lifetime: 13773 hours (573 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 d4 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 54272 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 04 00 00 00 02 ff d0 00 e0 08 00:48:21.243 WRITE DMA EXT + 35 00 00 04 00 00 00 02 ff cc 00 e0 08 00:48:21.243 WRITE DMA EXT + 35 00 00 04 00 00 00 02 ff c8 00 e0 08 00:48:21.243 WRITE DMA EXT + 35 00 00 04 00 00 00 02 ff c4 00 e0 08 00:48:21.243 WRITE DMA EXT + 35 00 00 04 00 00 00 02 ff c0 00 e0 08 00:48:21.243 WRITE DMA EXT + +Error 4 [3] occurred at disk power-on lifetime: 4651 hours (193 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 f6 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 62976 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 04 00 00 00 48 13 f2 00 e0 08 00:00:00.159 WRITE DMA EXT + 35 00 00 04 00 00 00 48 13 ee 00 e0 08 00:00:00.159 WRITE DMA EXT + 35 00 00 04 00 00 00 48 13 ea 00 e0 08 00:00:00.159 WRITE DMA EXT + 35 00 00 04 00 00 00 48 13 e6 00 e0 08 00:00:00.159 WRITE DMA EXT + 35 00 00 04 00 00 00 48 13 e2 00 e0 08 00:00:00.159 WRITE DMA EXT + +Error 3 [2] occurred at disk power-on lifetime: 4628 hours (192 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 bd 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 48384 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 04 00 00 00 42 b7 b9 00 e0 08 00:21:25.878 WRITE DMA EXT + 35 00 00 04 00 00 00 42 b7 b5 00 e0 08 00:21:25.878 WRITE DMA EXT + 35 00 00 04 00 00 00 42 b7 b1 00 e0 08 00:21:25.878 WRITE DMA EXT + 35 00 00 04 00 00 00 42 b7 ad 00 e0 08 00:21:25.878 WRITE DMA EXT + 35 00 00 04 00 00 00 42 b7 a9 00 e0 08 00:21:25.878 WRITE DMA EXT + +Error 2 [1] occurred at disk power-on lifetime: 906 hours (37 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 a3 c3 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 41923 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 04 00 00 00 04 eb 9f c3 e0 08 00:08:15.129 WRITE DMA EXT + 35 00 00 04 00 00 00 04 eb 9b c3 e0 08 00:08:15.129 WRITE DMA EXT + 35 00 00 03 80 00 00 04 eb 98 43 e0 08 00:08:15.129 WRITE DMA EXT + ca 00 00 00 80 00 00 00 eb 97 c3 e4 08 00:08:15.129 WRITE DMA + 35 00 00 04 00 00 00 04 eb 93 c3 e0 08 00:08:15.129 WRITE DMA EXT + +Error 1 [0] occurred at disk power-on lifetime: 3 hours (0 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 9d c3 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 40387 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 04 00 00 00 05 04 99 c3 e0 08 00:00:13.277 WRITE DMA EXT + ca 00 00 00 80 00 00 00 04 99 43 e5 08 00:00:13.277 WRITE DMA + 35 00 00 01 80 00 00 05 04 97 c3 e0 08 00:00:13.277 WRITE DMA EXT + 35 00 00 03 80 00 00 05 04 94 43 e0 08 00:00:13.277 WRITE DMA EXT + 35 00 00 04 00 00 00 05 04 90 43 e0 08 00:00:13.277 WRITE DMA EXT + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 59184 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 21/33 Celsius +Lifetime Min/Max Temperature: 17/67 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 5 minutes +Temperature Logging Interval: 5 minutes +Min/Max recommended Temperature: -5/80 Celsius +Min/Max Temperature Limit: -10/85 Celsius +Temperature History Size (Index): 128 (86) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 35 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 34 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8e00 4 0 Vendor specific +0x8e01 4 0 Vendor specific +0x8e02 4 0 Vendor specific +0x8e03 4 0 Vendor specific +0x8e04 4 0 Vendor specific +0x8e05 4 0 Vendor specific +0x8e06 4 0 Vendor specific +0x8e07 4 0 Vendor specific +0x8e08 4 0 Vendor specific +0x8e09 4 0 Vendor specific +0x8e0a 4 0 Vendor specific +0x8e0b 4 0 Vendor specific +0x8e0c 4 0 Vendor specific +0x8e0d 4 0 Vendor specific +0x8e0e 4 0 Vendor specific +0x8e0f 4 0 Vendor specific +0x8e10 4 0 Vendor specific +0x8e11 4 0 Vendor specific + + + diff --git a/HDD/Samsung/HD103/HD103UJ/27D7175C2186 b/HDD/Samsung/HD103/HD103UJ/27D7175C2186 new file mode 100644 index 000000000..ee39a560a --- /dev/null +++ b/HDD/Samsung/HD103/HD103UJ/27D7175C2186 @@ -0,0 +1,328 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F1 DT +Device Model: SAMSUNG HD103UJ +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AA01113 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b +Local Time is: Tue Nov 3 11:59:17 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11860) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 199) minutes. +Conveyance self-test routine +recommended polling time: ( 21) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 099 051 - 0 + 3 Spin_Up_Time POS--- 076 076 011 - 8140 + 4 Start_Stop_Count -O--CK 098 098 000 - 2171 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 100 100 051 - 0 + 8 Seek_Time_Performance P-S--K 100 100 015 - 9828 + 9 Power_On_Hours -O--CK 091 091 000 - 45758 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2167 + 13 Read_Soft_Error_Rate -OSR-- 100 099 000 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 12 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 067 056 000 - 33 (Min/Max 29/33) +194 Temperature_Celsius -O---K 067 055 000 - 33 (Min/Max 29/35) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 48096826 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 100 099 000 - 5 +201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL R/O 2 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 2 Write stream error log +0x22 GPL R/O 2 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 10 (device log contains only the most recent 8 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 10 [1] occurred at disk power-on lifetime: 29468 hours (1227 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 0c 60 9a 2a e0 00 Error: UNC at LBA = 0x0c609a2a = 207657514 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 0c 60 9a 27 e0 00 10:11:09.810 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 10:11:09.810 READ DMA EXT + 35 00 00 00 80 00 00 55 c7 95 a6 e0 00 10:11:09.810 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 95 26 e0 00 10:11:09.810 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 94 a6 e0 00 10:11:09.810 WRITE DMA EXT + +Error 9 [0] occurred at disk power-on lifetime: 29468 hours (1227 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 0c 60 9a 2a e0 00 Error: UNC at LBA = 0x0c609a2a = 207657514 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 0c 60 9a 27 e0 00 10:11:08.850 READ DMA EXT + 35 00 00 00 80 00 00 55 c7 91 a6 e0 00 10:11:08.850 WRITE DMA EXT + 25 00 00 00 40 00 00 0c 60 9a 2f e0 00 10:11:08.830 READ DMA EXT + 25 00 00 00 08 00 00 0c 60 9a 1f e0 00 10:11:08.830 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 10:11:08.830 READ DMA EXT + +Error 8 [7] occurred at disk power-on lifetime: 29468 hours (1227 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 0c 60 9a 2a e0 00 Error: UNC at LBA = 0x0c609a2a = 207657514 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 48 00 00 0c 60 9a 27 e0 00 10:11:07.860 READ DMA EXT + 25 00 00 00 08 00 00 0c 60 9a 17 e0 00 10:11:07.860 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 10:11:07.860 READ DMA EXT + 35 00 00 00 80 00 00 55 c7 8d 26 e0 00 10:11:07.860 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 8c a6 e0 00 10:11:07.860 WRITE DMA EXT + +Error 7 [6] occurred at disk power-on lifetime: 29468 hours (1227 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 0c 60 9a 2a e0 00 Error: UNC at LBA = 0x0c609a2a = 207657514 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 50 00 00 0c 60 9a 1f e0 00 10:11:06.900 READ DMA EXT + 25 00 00 00 08 00 00 0c 60 9a 0f e0 00 10:11:06.900 READ DMA EXT + 35 00 00 00 80 00 00 55 c7 89 26 e0 00 10:11:06.890 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 88 a6 e0 00 10:11:06.890 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 88 26 e0 00 10:11:06.890 WRITE DMA EXT + +Error 6 [5] occurred at disk power-on lifetime: 29468 hours (1227 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 0c 60 9a 2a e0 00 Error: UNC at LBA = 0x0c609a2a = 207657514 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 58 00 00 0c 60 9a 17 e0 00 10:11:05.930 READ DMA EXT + 25 00 00 00 08 00 00 0c 60 9a 07 e0 00 10:11:05.930 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 10:11:05.930 READ DMA EXT + 35 00 00 00 80 00 00 55 c7 85 26 e0 00 10:11:05.930 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 84 a6 e0 00 10:11:05.930 WRITE DMA EXT + +Error 5 [4] occurred at disk power-on lifetime: 29468 hours (1227 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 0c 60 9a 2a e0 00 Error: UNC at LBA = 0x0c609a2a = 207657514 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 60 00 00 0c 60 9a 0f e0 00 10:11:04.970 READ DMA EXT + 25 00 00 00 08 00 00 0c 60 99 ff e0 00 10:11:04.970 READ DMA EXT + 35 00 00 00 80 00 00 55 c7 81 26 e0 00 10:11:04.970 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 80 a6 e0 00 10:11:04.970 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 80 26 e0 00 10:11:04.970 WRITE DMA EXT + +Error 4 [3] occurred at disk power-on lifetime: 29468 hours (1227 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 0c 60 9a 2a e0 00 Error: UNC at LBA = 0x0c609a2a = 207657514 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 68 00 00 0c 60 9a 07 e0 00 10:11:03.810 READ DMA EXT + 25 00 00 00 10 00 00 0c 60 99 ef e0 00 10:11:03.810 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 10:11:03.810 READ DMA EXT + 35 00 00 00 80 00 00 55 c7 7d 26 e0 00 10:11:03.810 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 7c a6 e0 00 10:11:03.800 WRITE DMA EXT + +Error 3 [2] occurred at disk power-on lifetime: 29468 hours (1227 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 0c 60 9a 2a e0 00 Error: UNC at LBA = 0x0c609a2a = 207657514 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 40 00 00 0c 60 99 ef e0 00 10:11:01.860 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 10:11:01.850 READ DMA EXT + 35 00 00 00 80 00 00 55 c7 75 a6 e0 00 10:11:01.850 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 75 26 e0 00 10:11:01.850 WRITE DMA EXT + 35 00 00 00 80 00 00 55 c7 74 a6 e0 00 10:11:01.850 WRITE DMA EXT + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 45591 - +# 2 Short offline Completed without error 00% 42338 - +# 3 Short offline Completed without error 00% 31027 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: --/35 Celsius +Lifetime Min/Max Temperature: --/45 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -4/72 Celsius +Min/Max Temperature Limit: -9/77 Celsius +Temperature History Size (Index): 128 (17) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: scsi error aborted command +Read Device Statistics page 0x00 failed + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Samsung/HD103/HD103UJ/78F0D4C569C9 b/HDD/Samsung/HD103/HD103UJ/78F0D4C569C9 new file mode 100644 index 000000000..aefaa93d6 --- /dev/null +++ b/HDD/Samsung/HD103/HD103UJ/78F0D4C569C9 @@ -0,0 +1,178 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F1 DT +Device Model: SAMSUNG HD103UJ +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AA01113 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b +Local Time is: Tue Nov 3 11:50:55 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 254 +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11862) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 199) minutes. +Conveyance self-test routine +recommended polling time: ( 21) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 + 3 Spin_Up_Time POS--- 075 075 011 - 8330 + 4 Start_Stop_Count -O--CK 098 098 000 - 1692 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 100 100 051 - 0 + 8 Seek_Time_Performance P-S--K 100 100 015 - 10191 + 9 Power_On_Hours -O--CK 092 092 000 - 42297 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1684 + 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 067 058 000 - 33 (Min/Max 32/35) +194 Temperature_Celsius -O---K 072 057 000 - 28 (Min/Max 27/36) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 2179 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL R/O 2 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 2 Write stream error log +0x22 GPL R/O 2 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 42148 - +# 2 Short offline Completed without error 00% 38937 - +# 3 Short offline Completed without error 00% 27626 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: --/36 Celsius +Lifetime Min/Max Temperature: --/43 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -4/72 Celsius +Min/Max Temperature Limit: -9/77 Celsius +Temperature History Size (Index): 128 (119) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error +Read Device Statistics page 0x00 failed + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Samsung/HD103/HD103UJ/83251BABC3BD b/HDD/Samsung/HD103/HD103UJ/83251BABC3BD new file mode 100644 index 000000000..5454b54df --- /dev/null +++ b/HDD/Samsung/HD103/HD103UJ/83251BABC3BD @@ -0,0 +1,329 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F1 DT +Device Model: SAMSUNG HD103UJ +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AA01118 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b +Local Time is: Tue Nov 3 11:59:34 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11672) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 195) minutes. +Conveyance self-test routine +recommended polling time: ( 21) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 + 3 Spin_Up_Time POS--- 066 066 011 - 10960 + 4 Start_Stop_Count -O--CK 099 099 000 - 1388 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 100 100 051 - 0 + 8 Seek_Time_Performance P-S--K 100 100 015 - 10051 + 9 Power_On_Hours -O--CK 086 086 000 - 70951 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1384 + 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 6 +184 End-to-End_Error PO--CK 001 001 000 - 150 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 068 060 000 - 32 (Min/Max 28/33) +194 Temperature_Celsius -O---K 067 057 000 - 33 (Min/Max 28/34) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 136016894 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 099 000 - 108 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL R/O 2 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 2 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 108 (device log contains only the most recent 8 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 108 [3] occurred at disk power-on lifetime: 26854 hours (1118 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 00 21 00 00 02 68 f6 de 40 00 at LBA = 0x0268f6de = 40433374 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 3f d7 ff 40 00 00:28:54.370 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f d6 ff 40 00 00:28:54.370 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f d5 ff 40 00 00:28:54.370 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f d4 ff 40 00 00:28:54.370 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 00 68 f6 bf 40 00 00:28:54.370 WRITE FPDMA QUEUED + +Error 107 [2] occurred at disk power-on lifetime: 26854 hours (1118 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 00 41 00 00 31 3f d0 be 40 00 at LBA = 0x313fd0be = 826265790 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 40 00 00 00 68 f6 bf 40 00 00:28:54.220 WRITE FPDMA QUEUED + 61 00 00 00 38 00 00 00 69 c5 bf 40 00 00:28:54.220 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f d3 ff 40 00 00:28:54.220 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f d2 ff 40 00 00:28:54.220 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f d1 ff 40 00 00:28:54.220 WRITE FPDMA QUEUED + +Error 106 [1] occurred at disk power-on lifetime: 26854 hours (1118 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 00 51 00 00 31 3f d0 ae 40 00 at LBA = 0x313fd0ae = 826265774 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 3f cf ff 40 00 00:28:54.080 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 00 68 f6 bf 40 00 00:28:54.040 WRITE FPDMA QUEUED + 61 00 00 00 38 00 00 00 69 c5 bf 40 00 00:28:54.040 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f ce ff 40 00 00:28:54.040 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f cd ff 40 00 00:28:54.040 WRITE FPDMA QUEUED + +Error 105 [0] occurred at disk power-on lifetime: 26854 hours (1118 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- c0 00 c1 00 00 31 3f cd 3e 40 00 at LBA = 0x313fcd3e = 826264894 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 3f cc ff 40 00 00:28:53.930 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f cb ff 40 00 00:28:53.880 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f ca ff 40 00 00:28:53.830 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f c9 ff 40 00 00:28:53.780 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f c8 ff 40 00 00:28:53.730 WRITE FPDMA QUEUED + +Error 104 [7] occurred at disk power-on lifetime: 26854 hours (1118 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 00 d1 00 00 31 3f c2 2e 40 00 at LBA = 0x313fc22e = 826262062 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 3f c1 ff 40 00 00:28:53.380 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f c0 ff 40 00 00:28:53.330 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 00 68 f6 bf 40 00 00:28:53.290 WRITE FPDMA QUEUED + 61 00 00 00 30 00 00 00 69 c5 bf 40 00 00:28:53.290 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f bf ff 40 00 00:28:53.290 WRITE FPDMA QUEUED + +Error 103 [6] occurred at disk power-on lifetime: 26854 hours (1118 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 00 21 00 00 31 3f be de 40 00 at LBA = 0x313fbede = 826261214 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 3f bd ff 40 00 00:28:53.180 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 00 68 f6 bf 40 00 00:28:53.150 WRITE FPDMA QUEUED + 61 00 00 00 30 00 00 00 69 c5 bf 40 00 00:28:53.150 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f bc ff 40 00 00:28:53.150 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f bb ff 40 00 00:28:53.150 WRITE FPDMA QUEUED + +Error 102 [5] occurred at disk power-on lifetime: 26854 hours (1118 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- c0 00 21 00 00 31 3f b9 de 40 00 at LBA = 0x313fb9de = 826259934 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 3f b8 ff 40 00 00:28:53.000 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f b7 ff 40 00 00:28:53.000 WRITE FPDMA QUEUED + 61 00 02 01 00 00 00 00 3f b6 ff 40 00 00:28:53.000 WRITE FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 40 00 00:28:53.000 SET FEATURES [Enable write cache] + ef 00 aa 00 00 00 00 00 00 00 00 40 00 00:28:53.000 SET FEATURES [Enable read look-ahead] + +Error 101 [4] occurred at disk power-on lifetime: 26854 hours (1118 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- c0 00 31 00 00 31 3f b7 ce 40 00 at LBA = 0x313fb7ce = 826259406 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 3f b6 ff 40 00 00:28:52.890 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f b5 ff 40 00 00:28:52.840 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f b4 ff 40 00 00:28:52.790 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f b3 ff 40 00 00:28:52.740 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 3f b2 ff 40 00 00:28:52.690 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 50328 - +# 2 Short offline Completed without error 00% 47126 - +# 3 Extended offline Completed without error 00% 36492 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: --/34 Celsius +Lifetime Min/Max Temperature: --/43 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -4/72 Celsius +Min/Max Temperature Limit: -9/77 Celsius +Temperature History Size (Index): 128 (83) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: scsi error aborted command +Read Device Statistics page 0x00 failed + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Samsung/HD103/HD103UJ/B7B037063631 b/HDD/Samsung/HD103/HD103UJ/B7B037063631 new file mode 100644 index 000000000..8ce327eb0 --- /dev/null +++ b/HDD/Samsung/HD103/HD103UJ/B7B037063631 @@ -0,0 +1,101 @@ +smartctl 7.0 2018-12-30 r4883 [NetBSD 9.0_STABLE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F1 DT +Device Model: SAMSUNG HD103UJ +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AA01113 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b +Local Time is: Sat Aug 29 10:40:19 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11789) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 197) minutes. +Conveyance self-test routine +recommended polling time: ( 21) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 8000 + 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3512 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 11982 + 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 + 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3511 + 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 34 +184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 085 056 000 Old_age Always - 15 (Min/Max 15/15) +194 Temperature_Celsius 0x0022 081 055 000 Old_age Always - 19 (Min/Max 15/19) +195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 79243 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 55 +200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 +201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Samsung/HD103/HD103UJ/F93DAA51858A b/HDD/Samsung/HD103/HD103UJ/F93DAA51858A new file mode 100644 index 000000000..1433b5a08 --- /dev/null +++ b/HDD/Samsung/HD103/HD103UJ/F93DAA51858A @@ -0,0 +1,179 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F1 DT +Device Model: SAMSUNG HD103UJ +Serial Number: -- +LU WWN Device Id: 5 0000f0 ... +Firmware Version: 1AA01113 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b +Local Time is: Tue Nov 3 11:51:06 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11750) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 197) minutes. +Conveyance self-test routine +recommended polling time: ( 21) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 + 3 Spin_Up_Time POS--- 078 078 011 - 7450 + 4 Start_Stop_Count -O--CK 099 099 000 - 1400 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 100 100 051 - 0 + 8 Seek_Time_Performance P-S--K 100 100 015 - 10253 + 9 Power_On_Hours -O--CK 090 090 000 - 50298 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1395 + 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 6 +184 End-to-End_Error PO--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 066 059 000 - 34 (Min/Max 33/36) +194 Temperature_Celsius -O---K 066 053 000 - 34 (Min/Max 33/37) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 11037 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL R/O 2 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 2 Write stream error log +0x22 GPL R/O 2 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 50104 - +# 2 Short offline Completed without error 00% 46849 - +# 3 Extended offline Completed without error 00% 36238 - +# 4 Extended offline Completed without error 00% 36215 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: --/37 Celsius +Lifetime Min/Max Temperature: --/47 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -4/72 Celsius +Min/Max Temperature Limit: -9/77 Celsius +Temperature History Size (Index): 128 (76) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error +Read Device Statistics page 0x00 failed + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Samsung/HD154/HD154UI/114F90ABF5C8 b/HDD/Samsung/HD154/HD154UI/114F90ABF5C8 new file mode 100644 index 000000000..374477779 --- /dev/null +++ b/HDD/Samsung/HD154/HD154UI/114F90ABF5C8 @@ -0,0 +1,325 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F2 EG +Device Model: SAMSUNG HD154UI +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AG01118 +User Capacity: 1,500,301,910,016 bytes [1.50 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b +Local Time is: Fri Aug 14 21:59:31 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (19273) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 322) minutes. +Conveyance self-test routine +recommended polling time: ( 34) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 + 3 Spin_Up_Time POS--- 072 072 011 - 9340 + 4 Start_Stop_Count -O--CK 099 099 000 - 1167 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 100 100 051 - 0 + 8 Seek_Time_Performance P-S--K 100 100 015 - 10725 + 9 Power_On_Hours -O--CK 094 094 000 - 30628 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 165 + 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 001 001 000 - 149 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 066 066 000 - 34 (Min/Max 17/34) +194 Temperature_Celsius -O---K 075 066 000 - 25 (Min/Max 17/40) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 47199528 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 256 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL R/O 2 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 2 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 256 (device log contains only the most recent 8 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 256 [7] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 58 ff fe 00 00 5f bf 0e 49 40 00 65534 sectors at LBA = 0x5fbf0e49 = 1606356553 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 ff fe 00 00 5f bf 0e 49 40 08 05:44:47.040 WRITE DMA EXT + 61 00 00 00 f8 00 00 00 bf 10 52 40 00 05:44:47.040 WRITE FPDMA QUEUED + 61 00 00 00 f8 00 00 00 bf 0e 52 40 00 05:44:47.040 WRITE FPDMA QUEUED + 60 00 00 00 0d 00 00 ff 45 9b 0e 40 00 05:44:46.960 READ FPDMA QUEUED + 61 00 00 00 f8 00 00 00 bf 0c 52 40 00 05:44:46.960 WRITE FPDMA QUEUED + +Error 255 [6] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 ff ff 00 00 5f bf 04 49 40 00 at LBA = 0x5fbf0449 = 1606353993 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 f8 00 00 00 bf 01 52 40 00 05:44:16.770 WRITE FPDMA QUEUED + 35 00 00 00 e9 00 00 5f bf 03 61 40 08 05:44:16.770 WRITE DMA EXT + 60 00 00 00 0c 00 00 ff 56 38 59 40 00 05:44:16.730 READ FPDMA QUEUED + 61 00 00 00 f8 00 00 00 bf 02 52 40 00 05:44:16.730 WRITE FPDMA QUEUED + 61 00 00 00 f8 00 00 00 be fe 52 40 00 05:44:16.730 WRITE FPDMA QUEUED + +Error 254 [5] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 ff ff 00 00 5f ba e8 32 40 00 at LBA = 0x5fbae832 = 1606084658 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 ba e8 33 40 00 05:43:46.580 WRITE FPDMA QUEUED + 35 00 00 00 f0 00 00 5f ba e7 43 40 08 05:43:46.580 WRITE DMA EXT + 60 00 00 00 0d 00 00 00 76 e9 8b 40 00 05:43:46.530 READ FPDMA QUEUED + 61 00 00 01 00 00 00 00 ba e6 33 40 00 05:43:46.530 WRITE FPDMA QUEUED + 61 00 00 00 f8 00 00 00 be f7 52 40 00 05:43:46.530 WRITE FPDMA QUEUED + +Error 253 [4] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 ff ff 00 00 5f ba dd 32 40 00 at LBA = 0x5fbadd32 = 1606081842 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 ba dd 33 40 00 05:43:16.440 WRITE FPDMA QUEUED + 35 00 00 00 ef 00 00 5f ba dc 45 40 08 05:43:16.440 WRITE DMA EXT + 60 00 00 00 0c 00 00 00 4c a8 0c 40 00 05:43:16.390 READ FPDMA QUEUED + 61 00 00 01 00 00 00 00 ba db 33 40 00 05:43:16.390 WRITE FPDMA QUEUED + 61 00 00 00 f8 00 00 00 be ec 52 40 00 05:43:16.390 WRITE FPDMA QUEUED + +Error 252 [3] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 ff fe 00 00 5f ba d2 32 40 00 at LBA = 0x5fbad232 = 1606079026 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 ba d3 33 40 00 05:42:46.260 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 ba d2 33 40 00 05:42:46.260 WRITE FPDMA QUEUED + 35 00 00 00 d0 00 00 5f ba d1 63 40 08 05:42:46.260 WRITE DMA EXT + 60 00 00 00 0d 00 00 ff 1b 58 e0 40 00 05:42:46.210 READ FPDMA QUEUED + 61 00 00 01 00 00 00 00 ba d0 33 40 00 05:42:46.210 WRITE FPDMA QUEUED + +Error 251 [2] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 ff fe 00 00 5f ba c7 32 40 00 at LBA = 0x5fbac732 = 1606076210 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 ba c8 33 40 00 05:42:16.060 WRITE FPDMA QUEUED + 61 00 00 01 00 00 00 00 ba c7 33 40 00 05:42:16.060 WRITE FPDMA QUEUED + 35 00 00 00 e5 00 00 5f ba c6 4e 40 08 05:42:16.060 WRITE DMA EXT + 60 00 00 00 0c 00 00 00 46 97 1a 40 00 05:42:16.010 READ FPDMA QUEUED + 61 00 00 01 00 00 00 00 ba c5 33 40 00 05:42:16.010 WRITE FPDMA QUEUED + +Error 250 [1] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 ff ff 00 00 5f ba bc 32 40 00 at LBA = 0x5fbabc32 = 1606073394 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 ba bc 33 40 00 05:41:45.870 WRITE FPDMA QUEUED + 35 00 00 00 e8 00 00 5f ba bb 4c 40 08 05:41:45.870 WRITE DMA EXT + 60 00 00 00 0d 00 00 00 48 af 68 40 00 05:41:45.800 READ FPDMA QUEUED + 61 00 00 01 00 00 00 00 ba ba 33 40 00 05:41:45.800 WRITE FPDMA QUEUED + 61 00 00 00 f8 00 00 00 be cf 52 40 00 05:41:45.800 WRITE FPDMA QUEUED + +Error 249 [0] occurred at disk power-on lifetime: 24033 hours (1001 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 48 ff ff 00 00 5f ba b1 32 40 00 at LBA = 0x5fbab132 = 1606070578 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 00 ba b1 33 40 00 05:41:15.620 WRITE FPDMA QUEUED + 35 00 00 00 ef 00 00 5f ba b0 44 40 08 05:41:15.620 WRITE DMA EXT + 60 00 00 00 0c 00 00 00 63 a5 fe 40 00 05:41:15.580 READ FPDMA QUEUED + 61 00 00 01 00 00 00 00 ba af 33 40 00 05:41:15.580 WRITE FPDMA QUEUED + 61 00 00 00 f8 00 00 00 be c6 52 40 00 05:41:15.580 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 23008 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: --/40 Celsius +Lifetime Min/Max Temperature: --/48 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -4/72 Celsius +Min/Max Temperature Limit: -9/77 Celsius +Temperature History Size (Index): 128 (71) + +SMART WRITE LOG does not return COUNT and LBA_LOW register +SCT (Get) Error Recovery Control command failed + +Device Statistics page 0x00 is invalid (page=0x00, nentries=0) + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Samsung/HD154/HD154UI/4C1ACE7BF30C b/HDD/Samsung/HD154/HD154UI/4C1ACE7BF30C new file mode 100644 index 000000000..e20dbaca2 --- /dev/null +++ b/HDD/Samsung/HD154/HD154UI/4C1ACE7BF30C @@ -0,0 +1,103 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F2 EG +Device Model: SAMSUNG HD154UI +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AG01118 +User Capacity: 1,500,300,828,160 bytes [1.50 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b +Local Time is: Mon Oct 19 06:59:49 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 41) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: (18583) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 311) minutes. +Conveyance self-test routine +recommended polling time: ( 32) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0007 072 072 011 Pre-fail Always - 9150 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 111 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 77168 + 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 + 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 111 + 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 076 064 000 Old_age Always - 24 (Min/Max 24/32) +194 Temperature_Celsius 0x0022 076 063 000 Old_age Always - 24 (Min/Max 23/33) +195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2692735490 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 +201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 90% 571 - +# 2 Extended offline Interrupted (host reset) 90% 44830 - +# 3 Short offline Interrupted (host reset) 90% 44830 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Samsung/HD160/HD160JJ-P/A6B7FF26BBB8 b/HDD/Samsung/HD160/HD160JJ-P/A6B7FF26BBB8 new file mode 100644 index 000000000..3faea97ea --- /dev/null +++ b/HDD/Samsung/HD160/HD160JJ-P/A6B7FF26BBB8 @@ -0,0 +1,186 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint P80 SD +Device Model: SAMSUNG HD160JJ/P +Serial Number: -- +Firmware Version: ZM100-43 +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a +Local Time is: Wed Jul 15 11:32:42 2020 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 37) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 3726) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 62) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 22 + 3 Spin_Up_Time POS--- 100 100 025 - 5760 + 4 Start_Stop_Count -O--CK 098 098 000 - 2841 + 5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0 + 7 Seek_Error_Rate POSR-- 253 253 051 - 0 + 8 Seek_Time_Performance P-S--K 253 253 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 13148 + 10 Spin_Retry_Count PO--CK 253 253 051 - 0 + 11 Calibration_Retry_Count -O--C- 253 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1494 +187 Reported_Uncorrect -O--CK 253 253 000 - 0 +190 Airflow_Temperature_Cel -O---K 042 029 045 NOW 58 +194 Temperature_Celsius -O---K 042 029 000 - 58 +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 39927804 +196 Reallocated_Event_Count -O--CK 253 253 000 - 0 +197 Current_Pending_Sector -O--C- 253 253 000 - 0 +198 Offline_Uncorrectable ----CK 253 253 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0 +202 Data_Address_Mark_Errs -O--CK 253 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Invalid Error Log index = 0x0000, trying reserved byte (0x01) instead +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 7103 hours (295 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 10 00 00 02 55 51 e7 e0 00 Error: ICRC, ABRT 16 sectors at LBA = 0x025551e7 = 39145959 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 00 10 00 00 02 55 51 e7 e0 00 00:13:01.875 WRITE DMA EXT + 35 00 00 00 08 00 00 00 40 ba 4f e0 00 00:12:58.813 WRITE DMA EXT + 35 00 00 00 08 00 00 00 00 87 7f e0 00 00:12:57.813 WRITE DMA EXT + 35 00 00 00 08 00 00 00 01 b3 bf e0 00 00:12:57.813 WRITE DMA EXT + 35 00 00 00 08 00 00 00 01 7f 5f e0 00 00:12:57.813 WRITE DMA EXT + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 50% 1 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 58 Celsius +Power Cycle Min/Max Temperature: --/60 Celsius +Lifetime Min/Max Temperature: --/70 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 10/55 Celsius +Min/Max Temperature Limit: 5/60 Celsius +Temperature History Size (Index): 128 (53) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x8001 2 0 Vendor specific + diff --git a/HDD/Samsung/HD204/HD204UI/536E24EE3529 b/HDD/Samsung/HD204/HD204UI/536E24EE3529 new file mode 100644 index 000000000..b11f234c4 --- /dev/null +++ b/HDD/Samsung/HD204/HD204UI/536E24EE3529 @@ -0,0 +1,115 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F4 EG (AF) +Device Model: SAMSUNG HD204UI +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AQ10001 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Tue Oct 20 17:31:47 2020 MST + +==> WARNING: Using smartmontools or hdparm with this +drive may result in data loss due to a firmware bug. +****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** +Buggy and fixed firmware report same version number! +See the following web pages for details: +http://knowledge.seagate.com/articles/en_US/FAQ/223571en +https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +Warning: This result is based on an Attribute check. +See vendor-specific Attribute list for failed Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (19620) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 327) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail Always FAILING_NOW 40313 + 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 + 3 Spin_Up_Time 0x0023 068 058 025 Pre-fail Always - 9869 + 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2050 + 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 + 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 61358 + 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1769 +181 Program_Fail_Cnt_Total 0x0022 095 095 000 Old_age Always - 113273096 +191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 1210 +192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 +194 Temperature_Celsius 0x0002 064 055 000 Old_age Always - 31 (Min/Max 15/45) +195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 252 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 309 +223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 +225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2136 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Samsung/HD204/HD204UI/53900EC3A4B6 b/HDD/Samsung/HD204/HD204UI/53900EC3A4B6 new file mode 100644 index 000000000..74e355a4b --- /dev/null +++ b/HDD/Samsung/HD204/HD204UI/53900EC3A4B6 @@ -0,0 +1,362 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F4 EG (AF) +Device Model: SAMSUNG HD204UI +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AQ10001 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Aug 28 16:15:03 2020 CEST + +==> WARNING: Using smartmontools or hdparm with this +drive may result in data loss due to a firmware bug. +****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** +Buggy and fixed firmware report same version number! +See the following web pages for details: +http://knowledge.seagate.com/articles/en_US/FAQ/223571en +https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 25) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: (20460) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 341) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 2897 + 2 Throughput_Performance -OS--K 252 252 000 - 0 + 3 Spin_Up_Time PO---K 067 037 025 - 10290 + 4 Start_Stop_Count -O--CK 083 083 000 - 17240 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 12494 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 145 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2314 +181 Program_Fail_Cnt_Total -O---K 097 097 000 - 67912157 +191 G-Sense_Error_Rate -O---K 100 100 000 - 71 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +194 Temperature_Celsius -O---- 064 054 000 - 29 (Min/Max 13/46) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 252 100 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 095 095 000 - 3028 +200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 506 +223 Load_Retry_Count -O--CK 100 100 000 - 145 +225 Load_Cycle_Count -O--CK 099 099 000 - 17791 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 5930 (device log contains only the most recent 8 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 5930 [1] occurred at disk power-on lifetime: 12488 hours (520 days + 8 hours) + When the command that caused the error occurred, the device was in a reserved state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 3f fe 3f af 00 Error: IDNF at LBA = 0x0f3ffe3f = 255852095 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 00 00:00:03.763 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 00 00:00:03.760 STANDBY IMMEDIATE + b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:00:03.752 SMART READ DATA + b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:00:03.752 SMART RETURN STATUS + 60 00 00 00 10 00 00 00 00 00 00 40 00 00:00:03.752 READ FPDMA QUEUED + +Error 5929 [0] occurred at disk power-on lifetime: 12487 hours (520 days + 7 hours) + When the command that caused the error occurred, the device was in a reserved state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 3f fe 3f af 00 Error: IDNF at LBA = 0x0f3ffe3f = 255852095 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 00 00:00:00.083 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 00 00:00:00.081 STANDBY IMMEDIATE + b0 00 d0 00 00 00 00 00 c2 4f 00 a2 00 00:00:00.075 SMART READ DATA + b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:00:00.075 SMART RETURN STATUS + 60 00 00 00 10 00 00 00 00 00 00 40 00 00:00:00.075 READ FPDMA QUEUED + +Error 5928 [7] occurred at disk power-on lifetime: 12487 hours (520 days + 7 hours) + When the command that caused the error occurred, the device was in a reserved state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 3f fe 3f af 00 Error: IDNF at LBA = 0x0f3ffe3f = 255852095 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 00 00:00:00.038 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 00 00:00:00.036 STANDBY IMMEDIATE + 2f 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:00.019 READ LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:00:00.019 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:00.019 IDENTIFY DEVICE + +Error 5927 [6] occurred at disk power-on lifetime: 12486 hours (520 days + 6 hours) + When the command that caused the error occurred, the device was in a reserved state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 3f fe 3f af 00 Error: IDNF at LBA = 0x0f3ffe3f = 255852095 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 00 00:00:00.283 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 00 00:00:00.281 STANDBY IMMEDIATE + 60 00 00 00 04 00 00 00 00 08 40 40 00 00:00:00.281 READ FPDMA QUEUED + 60 00 00 00 01 00 00 00 00 08 00 40 00 00:00:00.281 READ FPDMA QUEUED + 60 00 00 00 01 00 00 00 00 08 00 40 00 00:00:00.281 READ FPDMA QUEUED + +Error 5926 [5] occurred at disk power-on lifetime: 12485 hours (520 days + 5 hours) + When the command that caused the error occurred, the device was in a reserved state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 3f fe 3f af 00 Error: IDNF at LBA = 0x0f3ffe3f = 255852095 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 00 00:00:02.249 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 00 00:00:02.246 STANDBY IMMEDIATE + b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:00:02.239 SMART READ DATA + b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:00:02.238 SMART RETURN STATUS + 60 00 00 00 10 00 00 00 00 00 00 40 00 00:00:02.238 READ FPDMA QUEUED + +Error 5925 [4] occurred at disk power-on lifetime: 12485 hours (520 days + 5 hours) + When the command that caused the error occurred, the device was in a reserved state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 3f fe 3f af 00 Error: IDNF at LBA = 0x0f3ffe3f = 255852095 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 00 00:00:00.534 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 00 00:00:00.532 STANDBY IMMEDIATE + 60 00 d0 00 10 00 00 00 00 00 00 40 00 00:00:00.531 READ FPDMA QUEUED + b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:00:00.526 SMART READ DATA + b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:00:00.526 SMART RETURN STATUS + +Error 5924 [3] occurred at disk power-on lifetime: 12483 hours (520 days + 3 hours) + When the command that caused the error occurred, the device was in a reserved state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 3f fe 3f af 00 Error: IDNF at LBA = 0x0f3ffe3f = 255852095 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 00 00:00:00.515 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 00 00:00:00.512 STANDBY IMMEDIATE + b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:00:00.506 SMART READ DATA + b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:00:00.506 SMART RETURN STATUS + 60 00 00 00 10 00 00 00 00 00 00 40 00 00:00:00.505 READ FPDMA QUEUED + +Error 5923 [2] occurred at disk power-on lifetime: 12479 hours (519 days + 23 hours) + When the command that caused the error occurred, the device was in a reserved state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 3f fe 3f af 00 Error: IDNF at LBA = 0x0f3ffe3f = 255852095 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 31 00 f1 00 01 00 00 00 00 00 00 a0 00 00:00:04.844 WRITE SECTOR(S) (w/o retry) [OBS-5] + e0 00 00 00 6f 00 00 00 fa ef fe af 00 00:00:04.842 STANDBY IMMEDIATE + b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 00:00:04.835 SMART READ DATA + b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 00:00:04.834 SMART RETURN STATUS + 60 00 00 00 10 00 00 00 00 00 00 40 00 00:00:04.834 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 90% 9250 - +# 2 Short offline Aborted by host 90% 9228 - +# 3 Short offline Aborted by host 90% 9228 - +# 4 Short offline Aborted by host 90% 9228 - +# 5 Short offline Aborted by host 90% 9228 - +# 6 Short offline Aborted by host 90% 8514 - +# 7 Short offline Aborted by host 90% 8514 - +# 8 Short offline Aborted by host 90% 8514 - +# 9 Short offline Aborted by host 90% 8514 - +#10 Short offline Aborted by host 90% 8514 - +#11 Short offline Aborted by host 90% 8514 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Aborted_by_host [90% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 19/29 Celsius +Lifetime Min/Max Temperature: 13/63 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 5 minutes +Temperature Logging Interval: 5 minutes +Min/Max recommended Temperature: -5/80 Celsius +Min/Max Temperature Limit: -10/85 Celsius +Temperature History Size (Index): 128 (73) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8e00 4 0 Vendor specific +0x8e01 4 0 Vendor specific +0x8e02 4 0 Vendor specific +0x8e03 4 0 Vendor specific +0x8e04 4 0 Vendor specific +0x8e05 4 0 Vendor specific +0x8e06 4 0 Vendor specific +0x8e07 4 0 Vendor specific +0x8e08 4 0 Vendor specific +0x8e09 4 0 Vendor specific +0x8e0a 4 0 Vendor specific +0x8e0b 4 0 Vendor specific +0x8e0c 4 0 Vendor specific +0x8e0d 4 0 Vendor specific +0x8e0e 4 0 Vendor specific +0x8e0f 4 0 Vendor specific +0x8e10 4 0 Vendor specific +0x8e11 4 0 Vendor specific + + + diff --git a/HDD/Samsung/HD204/HD204UI/5FCD38D29F77 b/HDD/Samsung/HD204/HD204UI/5FCD38D29F77 new file mode 100644 index 000000000..8974fc460 --- /dev/null +++ b/HDD/Samsung/HD204/HD204UI/5FCD38D29F77 @@ -0,0 +1,111 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F4 EG (AF) +Device Model: SAMSUNG HD204UI +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AQ10001 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Tue Oct 20 17:31:48 2020 MST + +==> WARNING: Using smartmontools or hdparm with this +drive may result in data loss due to a firmware bug. +****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** +Buggy and fixed firmware report same version number! +See the following web pages for details: +http://knowledge.seagate.com/articles/en_US/FAQ/223571en +https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (20640) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 344) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 369 + 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 + 3 Spin_Up_Time 0x0023 067 056 025 Pre-fail Always - 10077 + 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5600 + 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 + 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 59347 + 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1870 +181 Program_Fail_Cnt_Total 0x0022 099 099 000 Old_age Always - 23236355 +191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 1 +192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 +194 Temperature_Celsius 0x0002 064 057 000 Old_age Always - 31 (Min/Max 15/44) +195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 85 +223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 +225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5719 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Samsung/HD501/HD501LJ/A0F39302554C b/HDD/Samsung/HD501/HD501LJ/A0F39302554C new file mode 100644 index 000000000..bc146562a --- /dev/null +++ b/HDD/Samsung/HD501/HD501LJ/A0F39302554C @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint T166 +Device Model: SAMSUNG HD501LJ +Serial Number: -- +LU WWN Device Id: 5 0000f0 ... +Firmware Version: CR100-12 +User Capacity: 500,106,780,160 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 3b +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Thu Jul 16 11:02:45 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 254 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8923) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 152) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 253 100 051 - 0 + 3 Spin_Up_Time POS--- 100 100 015 - 7360 + 4 Start_Stop_Count -O--CK 090 090 000 - 11105 + 5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0 + 7 Seek_Error_Rate POSR-- 253 253 051 - 0 + 8 Seek_Time_Performance P-S--K 253 253 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 33072 + 10 Spin_Retry_Count PO--CK 253 253 051 - 0 + 11 Calibration_Retry_Count -O--C- 253 100 000 - 0 + 12 Power_Cycle_Count -O--CK 095 095 000 - 5411 + 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 22439 +187 Reported_Uncorrect -O--CK 253 253 000 - 0 +188 Command_Timeout -O--CK 253 253 000 - 0 +190 Airflow_Temperature_Cel -O---K 058 054 000 - 42 +194 Temperature_Celsius -O---K 112 097 000 - 42 +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 22439 +196 Reallocated_Event_Count -O--CK 253 253 000 - 0 +197 Total_Pending_Sectors -O--C- 253 253 000 - 0 +198 Offline_Uncorrectable ----CK 253 253 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 253 100 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 100 000 - 147 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 19741 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 19/43 Celsius +Lifetime Min/Max Temperature: 9/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -4/72 Celsius +Min/Max Temperature Limit: -9/77 Celsius +Temperature History Size (Index): 128 (87) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8001 2 0 Vendor specific + diff --git a/HDD/Samsung/HD502/HD502HI/A899CCF9F821 b/HDD/Samsung/HD502/HD502HI/A899CCF9F821 new file mode 100644 index 000000000..ddab71e0d --- /dev/null +++ b/HDD/Samsung/HD502/HD502HI/A899CCF9F821 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F2 EG +Device Model: SAMSUNG HD502HI +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AG01113 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b +Local Time is: Sun Oct 4 21:42:14 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 254 +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6400) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 108) minutes. +Conveyance self-test routine +recommended polling time: ( 12) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 + 3 Spin_Up_Time POS--- 087 087 011 - 4760 + 4 Start_Stop_Count -O--CK 093 093 000 - 7279 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 100 100 051 - 1 + 8 Seek_Time_Performance P-S--K 100 100 015 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 4900 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 000 - 2 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1031 + 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 079 063 000 - 21 (Min/Max 21/21) +194 Temperature_Celsius -O---K 078 062 000 - 22 (Min/Max 21/22) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 3374 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL R/O 2 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 2 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 22 Celsius +Power Cycle Min/Max Temperature: --/22 Celsius +Lifetime Min/Max Temperature: --/38 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -4/72 Celsius +Min/Max Temperature Limit: -9/77 Celsius +Temperature History Size (Index): 128 (7) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error +Read Device Statistics page 0x00 failed + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Samsung/HD502/HD502HJ/2C71FAE5A801 b/HDD/Samsung/HD502/HD502HJ/2C71FAE5A801 new file mode 100644 index 000000000..e167ac814 --- /dev/null +++ b/HDD/Samsung/HD502/HD502HJ/2C71FAE5A801 @@ -0,0 +1,347 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F3 +Device Model: SAMSUNG HD502HJ +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AJ10001 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Oct 28 17:33:30 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 254 +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4740) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 79) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 + 2 Throughput_Performance -OS--K 252 252 000 - 0 + 3 Spin_Up_Time PO---K 082 082 025 - 5499 + 4 Start_Stop_Count -O--CK 100 100 000 - 770 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 33143 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 790 + 13 Read_Soft_Error_Rate -O-RCK 100 100 000 - 0 +191 G-Sense_Error_Rate -O---K 252 252 000 - 0 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +193 Load_Cycle_Count -O--CK 100 100 000 - 790 +194 Temperature_Celsius -O---- 064 059 000 - 28 (Min/Max 14/41) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 252 252 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 26 +240 Head_Flying_Hours -O--CK 100 100 000 - 33143 +241 Total_LBAs_Written -O--CK 100 100 000 - 1080897 +242 Total_LBAs_Read -O--CK 099 094 000 - 2568502 +254 Free_Fall_Sensor -O--CK 100 100 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 42 (device log contains only the most recent 8 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 42 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.440 READ DMA EXT + 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.440 NOP [Abort queued commands] + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.435 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 00 e0 00 00:00:00.435 READ DMA EXT + 25 00 00 00 08 00 00 00 02 71 d0 e0 00 00:00:00.435 READ DMA EXT + +Error 41 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.435 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 00 e0 00 00:00:00.435 READ DMA EXT + 25 00 00 00 08 00 00 00 02 71 d0 e0 00 00:00:00.435 READ DMA EXT + 25 00 00 00 0c 00 00 00 02 71 c4 e0 00 00:00:00.435 READ DMA EXT + 25 00 00 00 7f 00 00 00 02 71 45 e0 00 00:00:00.435 READ DMA EXT + +Error 40 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.418 READ DMA EXT + 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.418 NOP [Abort queued commands] + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.413 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 00 e0 00 00:00:00.413 READ DMA EXT + 25 00 00 00 08 00 00 00 02 71 d0 e0 00 00:00:00.413 READ DMA EXT + +Error 39 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.413 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 00 e0 00 00:00:00.413 READ DMA EXT + 25 00 00 00 08 00 00 00 02 71 d0 e0 00 00:00:00.413 READ DMA EXT + 25 00 00 00 0c 00 00 00 02 71 c4 e0 00 00:00:00.413 READ DMA EXT + 25 00 00 00 7f 00 00 00 02 71 45 e0 00 00:00:00.413 READ DMA EXT + +Error 38 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.402 READ DMA EXT + 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.402 NOP [Abort queued commands] + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.397 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 00 e0 00 00:00:00.397 READ DMA EXT + 25 00 00 00 08 00 00 00 02 71 d0 e0 00 00:00:00.397 READ DMA EXT + +Error 37 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.397 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 00 e0 00 00:00:00.397 READ DMA EXT + 25 00 00 00 08 00 00 00 02 71 d0 e0 00 00:00:00.397 READ DMA EXT + 25 00 00 00 0c 00 00 00 02 71 c4 e0 00 00:00:00.397 READ DMA EXT + 25 00 00 00 7f 00 00 00 02 71 45 e0 00 00:00:00.397 READ DMA EXT + +Error 36 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.386 READ DMA EXT + 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:00.386 NOP [Abort queued commands] + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.381 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 00 e0 00 00:00:00.381 READ DMA EXT + 25 00 00 00 08 00 00 00 02 71 d0 e0 00 00:00:00.381 READ DMA EXT + +Error 35 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 3a 38 8b 01 e0 00 00:00:00.381 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 00 e0 00 00:00:00.381 READ DMA EXT + 25 00 00 00 08 00 00 00 02 71 d0 e0 00 00:00:00.381 READ DMA EXT + 25 00 00 00 0c 00 00 00 02 71 c4 e0 00 00:00:00.381 READ DMA EXT + 25 00 00 00 7f 00 00 00 02 71 45 e0 00 00:00:00.381 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 21/29 Celsius +Lifetime Min/Max Temperature: 16/63 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 5 minutes +Temperature Logging Interval: 5 minutes +Min/Max recommended Temperature: -5/80 Celsius +Min/Max Temperature Limit: -10/85 Celsius +Temperature History Size (Index): 128 (55) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8e00 4 0 Vendor specific +0x8e01 4 0 Vendor specific +0x8e02 4 0 Vendor specific +0x8e03 4 0 Vendor specific +0x8e04 4 0 Vendor specific +0x8e05 4 0 Vendor specific +0x8e06 4 0 Vendor specific +0x8e07 4 0 Vendor specific +0x8e08 4 0 Vendor specific +0x8e09 4 0 Vendor specific +0x8e0a 4 0 Vendor specific +0x8e0b 4 0 Vendor specific +0x8e0c 4 0 Vendor specific +0x8e0d 4 0 Vendor specific +0x8e0e 4 0 Vendor specific +0x8e0f 4 0 Vendor specific +0x8e10 4 0 Vendor specific +0x8e11 4 0 Vendor specific + + + diff --git a/HDD/Samsung/HD753/HD753LJ/940391931522 b/HDD/Samsung/HD753/HD753LJ/940391931522 new file mode 100644 index 000000000..a073009cc --- /dev/null +++ b/HDD/Samsung/HD753/HD753LJ/940391931522 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint F1 DT +Device Model: SAMSUNG HD753LJ +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 1AA01117 +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b +Local Time is: Fri Aug 14 22:30:42 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9883) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 166) minutes. +Conveyance self-test routine +recommended polling time: ( 18) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 + 3 Spin_Up_Time POS--- 082 082 011 - 6140 + 4 Start_Stop_Count -O--CK 098 098 000 - 2308 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 100 100 051 - 0 + 8 Seek_Time_Performance P-S--K 100 100 015 - 0 + 9 Power_On_Hours -O--CK 084 084 000 - 83254 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2308 + 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 068 047 000 - 32 (Min/Max 24/34) +194 Temperature_Celsius -O---K 067 046 000 - 33 (Min/Max 21/38) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 60964530 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x04 GPL R/O 2 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 2 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: --/38 Celsius +Lifetime Min/Max Temperature: --/55 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -4/72 Celsius +Min/Max Temperature Limit: -9/77 Celsius +Temperature History Size (Index): 128 (54) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error +Read Device Statistics page 0x00 failed + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 39 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 39 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Samsung/HM080/HM080HI/D5AD5BC2DE02 b/HDD/Samsung/HM080/HM080HI/D5AD5BC2DE02 new file mode 100644 index 000000000..329ce4720 --- /dev/null +++ b/HDD/Samsung/HM080/HM080HI/D5AD5BC2DE02 @@ -0,0 +1,155 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint M40/60/80 +Device Model: SAMSUNG HM080HI +Serial Number: -- +Firmware Version: AB100-12 +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 +Local Time is: Tue Aug 11 21:08:30 2020 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 121) The previous self-test completed having + the read element of the test failed. +Total time to complete Offline +data collection: ( 2670) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 44) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 253 100 051 - 0 + 3 Spin_Up_Time POS--- 253 253 025 - 2304 + 4 Start_Stop_Count -O--CK 070 070 000 - 30953 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 1 + 7 Seek_Error_Rate -OSR-- 253 253 000 - 0 + 8 Seek_Time_Performance --S--K 253 253 000 - 0 + 9 Power_On_Half_Minutes -O--CK 098 098 000 - 15054h+12m + 10 Spin_Retry_Count -O--CK 100 100 000 - 30 + 11 Calibration_Retry_Count -O--C- 100 100 000 - 4 + 12 Power_Cycle_Count -O--CK 095 095 000 - 5052 +187 Reported_Uncorrect -O--CK 077 077 000 - 24 +188 Command_Timeout -O--CK 253 253 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 038 040 Past 39 (Min/Max 13/62) +191 G-Sense_Error_Rate -O--C- 089 089 000 - 116567 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 918 +193 Load_Cycle_Count -O--C- 054 054 000 - 466783 +194 Temperature_Celsius -O---K 061 038 000 - 39 (Min/Max 13/62) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 13633 +196 Reallocated_Event_Count -O--CK 100 100 000 - 1 +197 Current_Pending_Sector -O--C- 253 100 000 - 0 +198 Offline_Uncorrectable ----CK 253 253 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 +201 Soft_Read_Error_Rate -O--C- 253 253 000 - 0 +223 Load_Retry_Count -O--C- 100 100 000 - 4 +225 Load_Cycle_Count -O--C- 054 054 000 - 466783 +255 Unknown_Attribute -O-R-- 253 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Invalid Error Log index = 0x0500 (reserved = 0x00) +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed: read failure 90% 13047 147068954 +# 2 Short offline Completed without error 00% 12261 - +# 3 Short offline Interrupted (host reset) 80% 10708 - +# 4 Short offline Completed without error 00% 5551 - +# 5 Short offline Completed without error 00% 3134 - +# 6 Short offline Completed without error 00% 2421 - +# 7 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: --/39 Celsius +Lifetime Min/Max Temperature: --/62 Celsius + +Unknown SCT Status format version 0, should be 2 or 3. +Read SCT Temperature History failed + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +Warning! SATA Phy Event Counters error: invalid SMART checksum. +SATA Phy Event Counters (GP Log 0x11) +[Reserved: 0x02 0x00 0x00 0x01] +ID Size Value Description +0x0001 0: Invalid entry + diff --git a/HDD/Samsung/HM160/HM160HI/2BAA957F36A7 b/HDD/Samsung/HM160/HM160HI/2BAA957F36A7 new file mode 100644 index 000000000..0cc4f98ca --- /dev/null +++ b/HDD/Samsung/HM160/HM160HI/2BAA957F36A7 @@ -0,0 +1,160 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.2-RELEASE-p20-HBSD i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint M5 +Device Model: SAMSUNG HM160HI +Serial Number: -- +LU WWN Device Id: 5 0f0000 ... +Firmware Version: HH100-08 +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0 +SATA Version is: SATA 2.5, 1.5 Gb/s +Local Time is: Fri Aug 7 22:03:37 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 22) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 56) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 56) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 + 3 Spin_Up_Time POS--- 252 252 025 - 2062 + 4 Start_Stop_Count -O--CK 099 099 000 - 1984 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-- 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 054 054 000 - 23743 + 10 Spin_Retry_Count -O--CK 100 100 051 - 2 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1029 +191 G-Sense_Error_Rate -O--CK 002 002 000 - 999999 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 223 +194 Temperature_Celsius -O---K 082 082 000 - 52 (Min/Max 14/53) +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--C- 252 252 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 +201 Soft_Read_Error_Rate -O--CK 252 252 000 - 0 +223 Load_Retry_Count -O--CK 094 094 000 - 7000 +225 Load_Cycle_Count -O--CK 002 002 000 - 999999 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x08 SL R/O 1 Power Conditions log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80 GPL,SL R/W 16 Host vendor specific log +0x81-0x9f SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 60% 19211 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Aborted_by_host [60% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 52 Celsius +Power Cycle Min/Max Temperature: 49/53 Celsius +Lifetime Min/Max Temperature: 15/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 15/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (73) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x8001 2 0 Vendor specific + diff --git a/HDD/Samsung/HM250/HM250JI/94ECD4F9C42E b/HDD/Samsung/HM250/HM250JI/94ECD4F9C42E new file mode 100644 index 000000000..c0291f415 --- /dev/null +++ b/HDD/Samsung/HM250/HM250JI/94ECD4F9C42E @@ -0,0 +1,229 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint M5 +Device Model: SAMSUNG HM250JI +Serial Number: -- +LU WWN Device Id: 5 0f0000 ... +Firmware Version: HS100-08 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0 +SATA Version is: SATA 2.5, 1.5 Gb/s +Local Time is: Mon Aug 17 09:31:52 2020 SAST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +See vendor-specific Attribute list for failed Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 106) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 106) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 26131 + 3 Spin_Up_Time POS--- 252 252 025 - 2625 + 4 Start_Stop_Count -O--CK 099 099 000 - 1273 + 5 Reallocated_Sector_Ct PO--CK 001 001 010 NOW 18772 + 7 Seek_Error_Rate -OSR-- 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 252 252 000 - 395 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 469 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 5530 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 333 +194 Temperature_Celsius -O---K 145 061 000 - 31 (Min/Max 5/59) +195 Hardware_ECC_Recovered -O-RC- 001 001 000 - 52035 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--C- 252 252 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 1956 +201 Soft_Read_Error_Rate -O--CK 252 252 000 - 0 +223 Load_Retry_Count -O--CK 100 100 000 - 883 +225 Load_Cycle_Count -O--CK 098 098 000 - 20692 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x08 SL R/O 1 Power Conditions log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80 GPL,SL R/W 16 Host vendor specific log +0x81-0x9f SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 16628 (device log contains only the most recent 8 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 16628 [3] occurred at disk power-on lifetime: 8 hours (0 days + 8 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT 1 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 00 00 00 00 40 00 00:00:12.437 READ DMA EXT + +Error 16627 [2] occurred at disk power-on lifetime: 8 hours (0 days + 8 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT 1 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 00 00 00 00 40 00 00:00:11.562 READ DMA EXT + +Error 16626 [1] occurred at disk power-on lifetime: 8 hours (0 days + 8 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT 1 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 00 00 00 00 40 00 00:00:10.687 READ DMA EXT + +Error 16625 [0] occurred at disk power-on lifetime: 8 hours (0 days + 8 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT 1 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 00 00 00 00 40 00 00:00:10.000 READ DMA EXT + +ATA_READ_LOG_EXT (addr=0x03:0x00, page=1, n=1) failed: Input/output error +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed: handling damage?? 00% 127 0 + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Interrupted [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 22/39 Celsius +Lifetime Min/Max Temperature: 8/61 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 15/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (25) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 57 Device-to-host register FISes sent due to a COMRESET +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x8001 2 0 Vendor specific + diff --git a/HDD/Samsung/HM500/HM500JI/8019286ABBCC b/HDD/Samsung/HM500/HM500JI/8019286ABBCC new file mode 100644 index 000000000..a6383d34b --- /dev/null +++ b/HDD/Samsung/HM500/HM500JI/8019286ABBCC @@ -0,0 +1,100 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint M7 +Device Model: SAMSUNG HM500JI +Serial Number: -- +LU WWN Device Id: 5 0024e9 ... +Firmware Version: 2AC101C4 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sun Oct 25 12:06:11 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7920) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 132) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 6633 + 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 + 3 Spin_Up_Time 0x0023 090 090 025 Pre-fail Always - 3060 + 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5375 + 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 + 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 25200 + 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 392 + 12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5254 +191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 973 +192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 +194 Temperature_Celsius 0x0002 064 050 000 Old_age Always - 24 (Min/Max 5/52) +195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 093 093 000 Old_age Always - 210 +198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 5 +200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 14031 +223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 392 +225 Load_Cycle_Count 0x0032 030 030 000 Old_age Always - 715672 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Samsung/SP2504/SP2504C/E32C934EC23A b/HDD/Samsung/SP2504/SP2504C/E32C934EC23A new file mode 100644 index 000000000..c37fa9b24 --- /dev/null +++ b/HDD/Samsung/SP2504/SP2504C/E32C934EC23A @@ -0,0 +1,136 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SAMSUNG SpinPoint P120 +Device Model: SAMSUNG SP2504C +Serial Number: -- +Firmware Version: VT100-34 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a +Local Time is: Thu Aug 27 09:08:32 2020 MST + +==> WARNING: May need -F samsung3 enabled; see manual for details. + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 254 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4835) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 80) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 + 3 Spin_Up_Time POS--- 100 100 025 - 6144 + 4 Start_Stop_Count -O--CK 081 081 000 - 19616 + 5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0 + 7 Seek_Error_Rate POSR-- 253 253 051 - 0 + 8 Seek_Time_Performance P-S--K 253 253 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 27797 + 10 Spin_Retry_Count PO--CK 253 253 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 002 000 - 1 + 12 Power_Cycle_Count -O--CK 091 091 000 - 10020 +190 Airflow_Temperature_Cel -O---K 115 097 000 - 41 +194 Temperature_Celsius -O---K 115 097 000 - 41 +195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 344990 +196 Reallocated_Event_Count -O--CK 253 253 000 - 0 +197 Current_Pending_Sector -O--C- 253 253 000 - 0 +198 Offline_Uncorrectable ----CK 253 253 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 +201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0 +202 Data_Address_Mark_Errs -O--CK 253 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x8001 2 0 Vendor specific + diff --git a/HDD/Seagate/ST1000/ST1000DM003-1CH162/5E0DD59975AC b/HDD/Seagate/ST1000/ST1000DM003-1CH162/5E0DD59975AC new file mode 100644 index 000000000..183722c73 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM003-1CH162/5E0DD59975AC @@ -0,0 +1,186 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST1000DM003-1CH162 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC49 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Sep 2 23:11:33 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 104) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 115 099 006 - 88586624 + 3 Spin_Up_Time PO---- 098 097 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1604 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 085 060 030 - 374133884 + 9 Power_On_Hours -O--CK 038 038 000 - 55163 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1606 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 0 0 3 +189 High_Fly_Writes -O-RCK 099 099 000 - 1 +190 Airflow_Temperature_Cel -O---K 062 056 045 - 38 (Min/Max 37/38) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1330 +193 Load_Cycle_Count -O--CK 075 075 000 - 50873 +194 Temperature_Celsius -O---K 038 044 000 - 38 (0 8 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 54059h+31m+39.235s +241 Total_LBAs_Written ------ 100 253 000 - 56951247098 +242 Total_LBAs_Read ------ 100 253 000 - 45750033428 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 55143 - +# 2 Short offline Completed without error 00% 55120 - +# 3 Short offline Completed without error 00% 55096 - +# 4 Short offline Completed without error 00% 55072 - +# 5 Short offline Completed without error 00% 55048 - +# 6 Short offline Completed without error 00% 55024 - +# 7 Short offline Completed without error 00% 55000 - +# 8 Short offline Completed without error 00% 54976 - +# 9 Short offline Completed without error 00% 54952 - +#10 Short offline Completed without error 00% 54928 - +#11 Short offline Completed without error 00% 54904 - +#12 Short offline Completed without error 00% 54880 - +#13 Short offline Completed without error 00% 54856 - +#14 Short offline Completed without error 00% 54832 - +#15 Short offline Completed without error 00% 54808 - +#16 Short offline Completed without error 00% 54784 - +#17 Short offline Completed without error 00% 54760 - +#18 Short offline Completed without error 00% 54736 - +#19 Short offline Completed without error 00% 54712 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 37/37 Celsius +Lifetime Min/Max Temperature: 9/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 23 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM003-1CH162/631FFD773CEE b/HDD/Seagate/ST1000/ST1000DM003-1CH162/631FFD773CEE new file mode 100644 index 000000000..795dbe122 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM003-1CH162/631FFD773CEE @@ -0,0 +1,184 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST1000DM003-1CH162 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC47 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Oct 14 00:36:20 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 110) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 099 006 - 3144152 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 098 098 020 - 2403 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 075 060 030 - 30977579 + 9 Power_On_Hours -O--CK 096 096 000 - 3802 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 098 098 020 - 2360 +183 Runtime_Bad_Block -O--CK 097 097 000 - 3 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 070 055 045 - 30 (Min/Max 24/31) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 88 +193 Load_Cycle_Count -O--CK 091 091 000 - 18533 +194 Temperature_Celsius -O---K 030 045 000 - 30 (0 13 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 2739h+01m+49.472s +241 Total_LBAs_Written ------ 100 253 000 - 9161378469 +242 Total_LBAs_Read ------ 100 253 000 - 5329197442 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3788 - +# 2 Extended offline Completed without error 00% 3777 - +# 3 Short offline Completed without error 00% 3752 - +# 4 Short offline Completed without error 00% 3748 - +# 5 Short offline Completed without error 00% 3726 - +# 6 Short offline Completed without error 00% 3711 - +# 7 Short offline Completed without error 00% 3696 - +# 8 Extended offline Completed without error 00% 3689 - +# 9 Short offline Completed without error 00% 3681 - +#10 Short offline Completed without error 00% 3671 - +#11 Short offline Completed without error 00% 3656 - +#12 Short offline Completed without error 00% 3645 - +#13 Short offline Completed without error 00% 3643 - +#14 Short offline Completed without error 00% 3624 - +#15 Short offline Completed without error 00% 3618 - +#16 Short offline Completed without error 00% 3611 - +#17 Extended offline Completed without error 00% 3606 - +#18 Short offline Completed without error 00% 3583 - +#19 Short offline Completed without error 00% 3567 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 24/31 Celsius +Lifetime Min/Max Temperature: 13/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST1000/ST1000DM003-1CH162/68199F4C65F3 b/HDD/Seagate/ST1000/ST1000DM003-1CH162/68199F4C65F3 new file mode 100644 index 000000000..b8071a4a7 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM003-1CH162/68199F4C65F3 @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST1000DM003-1CH162 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC47 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 14:11:12 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 584) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 114) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 150082392 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 162 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 075 060 030 - 32567739 + 9 Power_On_Hours -O--CK 068 068 000 - 28555 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 146 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 058 044 045 Past 42 (Min/Max 27/42 #17) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 78 +193 Load_Cycle_Count -O--CK 001 001 000 - 212775 +194 Temperature_Celsius -O---K 042 056 000 - 42 (0 18 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 11261h+00m+01.131s +241 Total_LBAs_Written ------ 100 253 000 - 12929219999 +242 Total_LBAs_Read ------ 100 253 000 - 11711418047 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 27/39 Celsius +Lifetime Min/Max Temperature: 18/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM003-1CH162/FD60D1C05E75 b/HDD/Seagate/ST1000/ST1000DM003-1CH162/FD60D1C05E75 new file mode 100644 index 000000000..52cf712d7 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM003-1CH162/FD60D1C05E75 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST1000DM003-1CH162 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC47 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 15 22:00:58 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 584) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 110) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 62197720 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 097 097 020 - 3273 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 089 060 030 - 820689403 + 9 Power_On_Hours -O--CK 085 085 000 - 13552 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 098 098 020 - 2344 +183 Runtime_Bad_Block -O--CK 099 099 000 - 1 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 098 000 - 0 0 136 +189 High_Fly_Writes -O-RCK 087 087 000 - 13 +190 Airflow_Temperature_Cel -O---K 064 058 045 - 36 (0 5 38 24 0) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 278 +193 Load_Cycle_Count -O--CK 095 095 000 - 11050 +194 Temperature_Celsius -O---K 036 042 000 - 36 (128 0 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 12834h+01m+27.776s +241 Total_LBAs_Written ------ 100 253 000 - 186574390749 +242 Total_LBAs_Read ------ 100 253 000 - 178595769528 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 24/38 Celsius +Lifetime Min/Max Temperature: 14/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST1000/ST1000DM003-1ER162/016B696F8B36 b/HDD/Seagate/ST1000/ST1000DM003-1ER162/016B696F8B36 new file mode 100644 index 000000000..8ed4ec473 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM003-1ER162/016B696F8B36 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST1000DM003-1ER162 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC45 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 26 06:24:53 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 72) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 99) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 119576440 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 092 092 020 - 8893 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 120127056 + 9 Power_On_Hours -O--CK 068 068 000 - 28839 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 422 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 0 0 1 +189 High_Fly_Writes -O-RCK 091 091 000 - 9 +190 Airflow_Temperature_Cel -O---K 060 055 045 - 40 (Min/Max 31/45) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 227 +193 Load_Cycle_Count -O--CK 056 056 000 - 89073 +194 Temperature_Celsius -O---K 040 045 000 - 40 (0 13 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 9832h+14m+06.130s +241 Total_LBAs_Written ------ 100 253 000 - 25888685632 +242 Total_LBAs_Read ------ 100 253 000 - 623385559952 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 30% 23420 - +# 2 Extended offline Completed without error 00% 21838 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 31/45 Celsius +Lifetime Min/Max Temperature: 13/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM003-1ER162/3059B772C7C0 b/HDD/Seagate/ST1000/ST1000DM003-1ER162/3059B772C7C0 new file mode 100644 index 000000000..c315d797a --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM003-1ER162/3059B772C7C0 @@ -0,0 +1,185 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST1000DM003-1ER162 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC45 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 16 08:58:22 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 103) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 188060576 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 556 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 072 060 030 - 19508205 + 9 Power_On_Hours -O--CK 100 100 000 - 564 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 555 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 070 061 045 - 30 (Min/Max 19/30) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 70 +193 Load_Cycle_Count -O--CK 099 099 000 - 2169 +194 Temperature_Celsius -O---K 030 040 000 - 30 (0 6 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 536h+19m+01.757s +241 Total_LBAs_Written ------ 100 253 000 - 5803926868 +242 Total_LBAs_Read ------ 100 253 000 - 44010724884 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 419 - +# 2 Short offline Completed without error 00% 403 - +# 3 Short offline Completed without error 00% 381 - +# 4 Short offline Completed without error 00% 349 - +# 5 Short offline Completed without error 00% 326 - +# 6 Short offline Completed without error 00% 315 - +# 7 Short offline Completed without error 00% 311 - +# 8 Short offline Completed without error 00% 293 - +# 9 Short offline Completed without error 00% 286 - +#10 Short offline Completed without error 00% 277 - +#11 Short offline Completed without error 00% 268 - +#12 Short offline Completed without error 00% 219 - +#13 Short offline Completed without error 00% 202 - +#14 Short offline Completed without error 00% 176 - +#15 Short offline Completed without error 00% 161 - +#16 Short offline Completed without error 00% 132 - +#17 Short offline Interrupted (host reset) 00% 119 - +#18 Short offline Completed without error 00% 99 - +#19 Short offline Completed without error 00% 6 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 19/28 Celsius +Lifetime Min/Max Temperature: 6/39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST1000/ST1000DM003-1ER162/9D346ADC12A2 b/HDD/Seagate/ST1000/ST1000DM003-1ER162/9D346ADC12A2 new file mode 100644 index 000000000..d4b9dc6f4 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM003-1ER162/9D346ADC12A2 @@ -0,0 +1,321 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST1000DM003-1ER162 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC45 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 23 14:36:31 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 105) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 181375400 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 095 095 020 - 5695 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 8 + 7 Seek_Error_Rate POSR-- 071 060 030 - 13537186 + 9 Power_On_Hours -O--CK 084 084 000 - 14163 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 095 095 020 - 5621 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 076 076 000 - 24 +188 Command_Timeout -O--CK 100 099 000 - 0 0 12 +189 High_Fly_Writes -O-RCK 098 098 000 - 2 +190 Airflow_Temperature_Cel -O---K 056 054 045 - 44 (Min/Max 32/44) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 961 +193 Load_Cycle_Count -O--CK 070 070 000 - 60518 +194 Temperature_Celsius -O---K 044 046 000 - 44 (0 9 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 10652h+57m+05.143s +241 Total_LBAs_Written ------ 100 253 000 - 5696639754 +242 Total_LBAs_Read ------ 100 253 000 - 45352586891 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 24 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 24 [3] occurred at disk power-on lifetime: 13308 hours (554 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 17 06 93 77 00 00 Error: UNC at LBA = 0x17069377 = 386306935 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 20 20 00 01 00 00 17 06 93 77 e0 00 01:05:49.657 READ DMA EXT + 35 20 20 00 01 00 00 17 06 93 76 e0 00 01:05:49.657 WRITE DMA EXT + 25 20 20 00 01 00 00 17 06 93 76 e0 00 01:05:49.616 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 77 e0 00 01:05:49.050 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 76 e0 00 01:05:49.049 READ DMA EXT + +Error 23 [2] occurred at disk power-on lifetime: 13308 hours (554 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 17 06 93 77 00 00 Error: UNC at LBA = 0x17069377 = 386306935 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 20 20 00 01 00 00 17 06 93 77 e0 00 01:05:49.050 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 76 e0 00 01:05:49.049 READ DMA EXT + 35 20 20 00 01 00 00 17 06 93 76 e0 00 01:05:49.049 WRITE DMA EXT + 35 20 20 00 01 00 00 17 06 93 75 e0 00 01:05:49.049 WRITE DMA EXT + 35 20 20 00 01 00 00 17 06 93 76 e0 00 01:05:49.048 WRITE DMA EXT + +Error 22 [1] occurred at disk power-on lifetime: 13308 hours (554 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 17 06 93 76 00 00 Error: UNC at LBA = 0x17069376 = 386306934 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 20 20 00 01 00 00 17 06 93 76 e0 00 01:05:44.956 READ DMA EXT + 35 20 20 00 01 00 00 17 06 93 75 e0 00 01:05:44.956 WRITE DMA EXT + 25 20 20 00 01 00 00 17 06 93 75 e0 00 01:05:44.915 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 76 e0 00 01:05:44.349 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 75 e0 00 01:05:44.348 READ DMA EXT + +Error 21 [0] occurred at disk power-on lifetime: 13308 hours (554 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 17 06 93 76 00 00 Error: UNC at LBA = 0x17069376 = 386306934 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 20 20 00 01 00 00 17 06 93 76 e0 00 01:05:44.349 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 75 e0 00 01:05:44.348 READ DMA EXT + 35 20 20 00 01 00 00 17 06 93 75 e0 00 01:05:44.348 WRITE DMA EXT + 35 20 20 00 01 00 00 17 06 93 74 e0 00 01:05:44.348 WRITE DMA EXT + 35 20 20 00 01 00 00 17 06 93 75 e0 00 01:05:44.347 WRITE DMA EXT + +Error 20 [19] occurred at disk power-on lifetime: 13308 hours (554 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 17 06 93 75 00 00 Error: UNC at LBA = 0x17069375 = 386306933 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 20 20 00 01 00 00 17 06 93 75 e0 00 01:05:40.105 READ DMA EXT + 35 20 20 00 01 00 00 17 06 93 74 e0 00 01:05:40.105 WRITE DMA EXT + 25 20 20 00 01 00 00 17 06 93 74 e0 00 01:05:40.064 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 75 e0 00 01:05:39.499 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 74 e0 00 01:05:39.497 READ DMA EXT + +Error 19 [18] occurred at disk power-on lifetime: 13308 hours (554 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 17 06 93 75 00 00 Error: UNC at LBA = 0x17069375 = 386306933 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 20 20 00 01 00 00 17 06 93 75 e0 00 01:05:39.499 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 74 e0 00 01:05:39.497 READ DMA EXT + 35 20 20 00 01 00 00 17 06 93 74 e0 00 01:05:39.497 WRITE DMA EXT + 35 20 20 00 01 00 00 17 06 93 73 e0 00 01:05:39.497 WRITE DMA EXT + 35 20 20 00 01 00 00 17 06 93 74 e0 00 01:05:39.497 WRITE DMA EXT + +Error 18 [17] occurred at disk power-on lifetime: 13308 hours (554 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 17 06 93 74 00 00 Error: UNC at LBA = 0x17069374 = 386306932 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 20 20 00 01 00 00 17 06 93 74 e0 00 01:05:35.396 READ DMA EXT + 35 20 20 00 01 00 00 17 06 93 73 e0 00 01:05:35.396 WRITE DMA EXT + 25 20 20 00 01 00 00 17 06 93 73 e0 00 01:05:35.355 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 74 e0 00 01:05:34.789 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 73 e0 00 01:05:34.788 READ DMA EXT + +Error 17 [16] occurred at disk power-on lifetime: 13308 hours (554 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 17 06 93 74 00 00 Error: UNC at LBA = 0x17069374 = 386306932 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 20 20 00 01 00 00 17 06 93 74 e0 00 01:05:34.789 READ DMA EXT + 25 20 20 00 01 00 00 17 06 93 73 e0 00 01:05:34.788 READ DMA EXT + 35 20 20 00 01 00 00 17 06 93 73 e0 00 01:05:34.788 WRITE DMA EXT + 35 20 20 00 01 00 00 17 06 93 72 e0 00 01:05:34.788 WRITE DMA EXT + 35 20 20 00 01 00 00 17 06 93 73 e0 00 01:05:34.787 WRITE DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 13308 - +# 2 Short offline Completed: read failure 90% 13307 386306928 +# 3 Short offline Completed: read failure 90% 13307 386306928 +# 4 Short offline Completed: read failure 90% 13307 386306928 +# 5 Short offline Completed: read failure 90% 13306 386306928 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 32/43 Celsius +Lifetime Min/Max Temperature: 9/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST1000/ST1000DM003-1ER162/E9934184F120 b/HDD/Seagate/ST1000/ST1000DM003-1ER162/E9934184F120 new file mode 100644 index 000000000..2910d32b4 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM003-1ER162/E9934184F120 @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST1000DM003-1ER162 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC45 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 19:50:28 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 109) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 119 099 006 - 210495776 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 097 097 020 - 3655 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 4416168650 + 9 Power_On_Hours -O--CK 093 093 000 - 6948 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 098 098 020 - 2890 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 098 000 - 0 0 21 +189 High_Fly_Writes -O-RCK 097 097 000 - 3 +190 Airflow_Temperature_Cel -O---K 060 053 045 - 40 (Min/Max 23/40) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 62 +193 Load_Cycle_Count -O--CK 073 073 000 - 55927 +194 Temperature_Celsius -O---K 040 047 000 - 40 (0 15 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 4824h+55m+40.358s +241 Total_LBAs_Written ------ 100 253 000 - 111057520491 +242 Total_LBAs_Read ------ 100 253 000 - 358338959636 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6753 - +# 2 Extended offline Aborted by host 90% 972 - +# 3 Short offline Completed without error 00% 88 - +# 4 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 23/40 Celsius +Lifetime Min/Max Temperature: 15/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM003-1ER162/ED24B30A7574 b/HDD/Seagate/ST1000/ST1000DM003-1ER162/ED24B30A7574 new file mode 100644 index 000000000..d0a9eeb4d --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM003-1ER162/ED24B30A7574 @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST1000DM003-1ER162 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC45 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 26 06:27:06 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 106) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 110 099 006 - 28296208 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 091 091 020 - 9835 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 070 060 030 - 11316442 + 9 Power_On_Hours -O--CK 085 085 000 - 14015 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 862 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 2 6 31 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 056 052 045 - 44 (Min/Max 34/48) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1627 +193 Load_Cycle_Count -O--CK 089 089 000 - 22028 +194 Temperature_Celsius -O---K 044 048 000 - 44 (0 17 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 5056h+26m+36.592s +241 Total_LBAs_Written ------ 100 253 000 - 5003871021 +242 Total_LBAs_Read ------ 100 253 000 - 34182313639 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 13827 - +# 2 Extended offline Interrupted (host reset) 90% 13806 - +# 3 Extended offline Interrupted (host reset) 00% 12847 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 34/49 Celsius +Lifetime Min/Max Temperature: 17/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM010-2EP102/24415F7E0574 b/HDD/Seagate/ST1000/ST1000DM010-2EP102/24415F7E0574 new file mode 100644 index 000000000..9f9863ab4 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM010-2EP102/24415F7E0574 @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST1000DM010-2EP102 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC43 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 22 00:28:37 2020 +08 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 109) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 078 064 006 - 73766247 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1274 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 077 060 045 - 50800414 + 9 Power_On_Hours -O--CK 095 095 000 - 4405 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1168 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 052 040 - 41 (Min/Max 29/42) +193 Load_Cycle_Count -O--CK 100 100 000 - 1277 +194 Temperature_Celsius -O---K 041 022 000 - 41 (0 22 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 008 001 000 - 73766247 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 3 +240 Head_Flying_Hours ------ 100 253 000 - 4346h+23m+15.220s +241 Total_LBAs_Written ------ 100 253 000 - 8925796708 +242 Total_LBAs_Read ------ 100 253 000 - 12122066418 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4120 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 4800 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 29/42 Celsius +Lifetime Min/Max Temperature: 22/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1168 --- Lifetime Power-On Resets +0x01 0x010 4 4405 --- Power-on Hours +0x01 0x018 6 8956124964 --- Logical Sectors Written +0x01 0x020 6 95424204 --- Number of Write Commands +0x01 0x028 6 12137511342 --- Logical Sectors Read +0x01 0x030 6 402230586 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4349 --- Spindle Motor Power-on Hours +0x03 0x010 4 4347 --- Head Flying Hours +0x03 0x018 4 1277 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 42 --- Average Short Term Temperature +0x05 0x018 1 40 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 46 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM010-2EP102/41779C53F591 b/HDD/Seagate/ST1000/ST1000DM010-2EP102/41779C53F591 new file mode 100644 index 000000000..bd4385692 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM010-2EP102/41779C53F591 @@ -0,0 +1,355 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST1000DM010-2EP102 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC43 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Oct 10 15:00:53 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 105) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 055 006 - 166973394 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 13 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 084 060 045 - 242768456 + 9 Power_On_Hours -O--CK 076 076 000 - 21052 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 13 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 001 001 000 - 100 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 063 054 040 - 37 (Min/Max 36/37) +193 Load_Cycle_Count -O--CK 100 100 000 - 878 +194 Temperature_Celsius -O---K 037 021 000 - 37 (0 21 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 002 001 000 - 166973394 +197 Current_Pending_Sector -O--C- 100 100 000 - 8 +198 Offline_Uncorrectable ----C- 100 100 000 - 8 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 14475h+39m+47.447s +241 Total_LBAs_Written ------ 100 253 000 - 33785486544 +242 Total_LBAs_Read ------ 100 253 000 - 8763088752 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4120 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 4800 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 100 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 100 [19] occurred at disk power-on lifetime: 15330 hours (638 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 05 e6 e0 00 00 Error: UNC at LBA = 0x0705e6e0 = 117827296 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 20 00 00 07 07 3c 70 40 00 01:36:19.601 READ FPDMA QUEUED + 60 00 00 00 20 00 00 07 05 e6 d0 40 00 01:36:19.600 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:36:19.573 READ LOG EXT + 60 00 00 00 20 00 00 07 07 3c 70 40 00 01:36:17.318 READ FPDMA QUEUED + 60 00 00 00 20 00 00 07 05 e6 d0 40 00 01:36:17.317 READ FPDMA QUEUED + +Error 99 [18] occurred at disk power-on lifetime: 15330 hours (638 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 05 e6 e0 00 00 Error: UNC at LBA = 0x0705e6e0 = 117827296 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 20 00 00 07 07 3c 70 40 00 01:36:17.318 READ FPDMA QUEUED + 60 00 00 00 20 00 00 07 05 e6 d0 40 00 01:36:17.317 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:36:17.255 READ LOG EXT + 60 00 00 00 20 00 00 07 07 3c 70 40 00 01:36:15.001 READ FPDMA QUEUED + 60 00 00 00 20 00 00 07 05 e6 d0 40 00 01:36:15.001 READ FPDMA QUEUED + +Error 98 [17] occurred at disk power-on lifetime: 15330 hours (638 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 05 e6 e0 00 00 Error: UNC at LBA = 0x0705e6e0 = 117827296 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 20 00 00 07 07 3c 70 40 00 01:36:15.001 READ FPDMA QUEUED + 60 00 00 00 20 00 00 07 05 e6 d0 40 00 01:36:15.001 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:36:14.963 READ LOG EXT + 61 00 00 00 10 00 00 61 06 7c 00 40 00 01:36:12.734 WRITE FPDMA QUEUED + 60 00 00 00 20 00 00 07 07 3c 70 40 00 01:36:12.734 READ FPDMA QUEUED + +Error 97 [16] occurred at disk power-on lifetime: 15330 hours (638 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 05 e6 e0 00 00 Error: WP at LBA = 0x0705e6e0 = 117827296 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 10 00 00 61 06 7c 00 40 00 01:36:12.734 WRITE FPDMA QUEUED + 60 00 00 00 20 00 00 07 07 3c 70 40 00 01:36:12.734 READ FPDMA QUEUED + 60 00 00 00 20 00 00 07 05 e6 d0 40 00 01:36:12.733 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 01:36:12.629 READ LOG EXT + 61 00 00 00 10 00 00 61 06 7c 00 40 00 01:36:12.628 WRITE FPDMA QUEUED + +Error 96 [15] occurred at disk power-on lifetime: 15330 hours (638 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 05 e6 e0 00 00 Error: WP at LBA = 0x0705e6e0 = 117827296 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 10 00 00 61 06 7c 00 40 00 01:36:12.628 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 07 05 e8 08 40 00 01:36:10.405 WRITE FPDMA QUEUED + 60 00 00 00 20 00 00 07 07 3c 70 40 00 01:36:10.405 READ FPDMA QUEUED + 61 00 00 00 08 00 00 07 05 e7 f8 40 00 01:36:10.403 WRITE FPDMA QUEUED + 60 00 00 00 c8 00 00 07 07 3b 40 40 00 01:36:10.403 READ FPDMA QUEUED + +Error 95 [14] occurred at disk power-on lifetime: 15330 hours (638 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 05 e6 e0 00 00 Error: UNC at LBA = 0x0705e6e0 = 117827296 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 e8 00 00 07 05 ef 58 40 00 01:36:07.747 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 ee 58 40 00 01:36:07.747 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 ed 58 40 00 01:36:07.747 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 ec 58 40 00 01:36:07.747 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 eb 58 40 00 01:36:07.747 READ FPDMA QUEUED + +Error 94 [13] occurred at disk power-on lifetime: 15330 hours (638 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 05 e6 e0 00 00 Error: UNC at LBA = 0x0705e6e0 = 117827296 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 e8 00 00 07 05 ef 58 40 00 01:36:05.478 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 ee 58 40 00 01:36:05.478 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 ed 58 40 00 01:36:05.478 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 ec 58 40 00 01:36:05.478 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 eb 58 40 00 01:36:05.478 READ FPDMA QUEUED + +Error 93 [12] occurred at disk power-on lifetime: 15330 hours (638 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 05 e6 e0 00 00 Error: WP at LBA = 0x0705e6e0 = 117827296 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 08 00 00 61 01 60 88 40 00 01:36:03.161 WRITE FPDMA QUEUED + 60 00 00 00 e8 00 00 07 05 ef 58 40 00 01:36:03.161 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 ee 58 40 00 01:36:03.161 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 ed 58 40 00 01:36:03.161 READ FPDMA QUEUED + 60 00 00 01 00 00 00 07 05 ec 58 40 00 01:36:03.161 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 36/37 Celsius +Lifetime Min/Max Temperature: 21/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 21052 --- Power-on Hours +0x01 0x018 6 33789758352 --- Logical Sectors Written +0x01 0x020 6 591527077 --- Number of Write Commands +0x01 0x028 6 8820698819 --- Logical Sectors Read +0x01 0x030 6 262319437 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 20904 --- Spindle Motor Power-on Hours +0x03 0x010 4 174 --- Head Flying Hours +0x03 0x018 4 878 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 8 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 95 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 36 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 28 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 34 --- Lowest Average Short Term Temperature +0x05 0x040 1 41 --- Highest Average Long Term Temperature +0x05 0x048 1 35 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM010-2EP102/4DF36DF03B8E b/HDD/Seagate/ST1000/ST1000DM010-2EP102/4DF36DF03B8E new file mode 100644 index 000000000..fc9da85a6 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM010-2EP102/4DF36DF03B8E @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST1000DM010-2EP102 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC43 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 14 09:36:44 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 104) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 079 063 006 - 93162680 + 3 Spin_Up_Time PO---- 098 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 63 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 085 060 045 - 355938409 + 9 Power_On_Hours -O--CK 084 084 000 - 14561 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 63 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 064 061 040 - 36 (Min/Max 31/37) +193 Load_Cycle_Count -O--CK 100 100 000 - 654 +194 Temperature_Celsius -O---K 036 015 000 - 36 (0 15 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 001 001 000 - 93162680 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 14234h+47m+51.217s +241 Total_LBAs_Written ------ 100 253 000 - 33839962189 +242 Total_LBAs_Read ------ 100 253 000 - 14493618918 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4120 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 4800 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 31/38 Celsius +Lifetime Min/Max Temperature: 14/39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 63 --- Lifetime Power-On Resets +0x01 0x010 4 14561 --- Power-on Hours +0x01 0x018 6 33845776621 --- Logical Sectors Written +0x01 0x020 6 689269079 --- Number of Write Commands +0x01 0x028 6 14502814648 --- Logical Sectors Read +0x01 0x030 6 621072783 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 14560 --- Spindle Motor Power-on Hours +0x03 0x010 4 620 --- Head Flying Hours +0x03 0x018 4 654 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM010-2EP102/68405C068212 b/HDD/Seagate/ST1000/ST1000DM010-2EP102/68405C068212 new file mode 100644 index 000000000..b4061004e --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM010-2EP102/68405C068212 @@ -0,0 +1,203 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate BarraCuda 3.5 +Device Model: ST1000DM010-2EP102 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC43 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 16:21:29 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 104) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 084 063 006 - 243874424 + 3 Spin_Up_Time PO---- 098 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 71 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 086 060 045 - 423252732 + 9 Power_On_Hours -O--CK 082 082 000 - 15936 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 71 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 067 057 040 - 33 (Min/Max 28/38) +193 Load_Cycle_Count -O--CK 100 100 000 - 715 +194 Temperature_Celsius -O---K 033 018 000 - 33 (0 18 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 006 001 000 - 243874424 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 15763h+05m+37.949s +241 Total_LBAs_Written ------ 100 253 000 - 39241391121 +242 Total_LBAs_Read ------ 100 253 000 - 6631110075 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4120 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 4800 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 28/39 Celsius +Lifetime Min/Max Temperature: 18/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 71 --- Lifetime Power-On Resets +0x01 0x010 4 15936 --- Power-on Hours +0x01 0x018 6 39241608537 --- Logical Sectors Written +0x01 0x020 6 1513205191 --- Number of Write Commands +0x01 0x028 6 6631161001 --- Logical Sectors Read +0x01 0x030 6 56997424 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 15935 --- Spindle Motor Power-on Hours +0x03 0x010 4 562 --- Head Flying Hours +0x03 0x018 4 715 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST1000/ST1000DM010-2EP102/743CE65EB3DB b/HDD/Seagate/ST1000/ST1000DM010-2EP102/743CE65EB3DB new file mode 100644 index 000000000..af8afd4fd --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM010-2EP102/743CE65EB3DB @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST1000DM010-2EP102 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC43 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 23 14:36:28 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 109) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 079 065 006 - 91650334 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 70 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 067 060 045 - 6215003 + 9 Power_On_Hours -O--CK 100 100 000 - 134 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 76 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 056 040 - 41 (Min/Max 30/44) +193 Load_Cycle_Count -O--CK 100 100 000 - 76 +194 Temperature_Celsius -O---K 041 025 000 - 41 (0 25 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 002 001 000 - 91650334 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 134h+05m+47.890s +241 Total_LBAs_Written ------ 100 253 000 - 1142300159 +242 Total_LBAs_Read ------ 100 253 000 - 1013147157 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4120 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 4800 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 31/44 Celsius +Lifetime Min/Max Temperature: 25/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 76 --- Lifetime Power-On Resets +0x01 0x010 4 134 --- Power-on Hours +0x01 0x018 6 1142300159 --- Logical Sectors Written +0x01 0x020 6 8854604 --- Number of Write Commands +0x01 0x028 6 1013147157 --- Logical Sectors Read +0x01 0x030 6 15963789 --- Number of Read Commands +0x01 0x038 6 1597905388833 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 134 --- Spindle Motor Power-on Hours +0x03 0x010 4 134 --- Head Flying Hours +0x03 0x018 4 76 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 30 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 39 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 38 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 13 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM010-2EP102/929C9275EED7 b/HDD/Seagate/ST1000/ST1000DM010-2EP102/929C9275EED7 new file mode 100644 index 000000000..877945ad5 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM010-2EP102/929C9275EED7 @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST1000DM010-2EP102 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC43 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 25 07:49:48 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 103) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 077 063 006 - 58706616 + 3 Spin_Up_Time PO---- 097 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 161 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 079 060 045 - 99124909 + 9 Power_On_Hours -O--CK 092 092 000 - 7826 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 161 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 065 061 040 - 35 (Min/Max 27/36) +193 Load_Cycle_Count -O--CK 100 100 000 - 442 +194 Temperature_Celsius -O---K 035 016 000 - 35 (0 16 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 002 001 000 - 58706616 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 7780h+50m+04.564s +241 Total_LBAs_Written ------ 100 253 000 - 30218304352 +242 Total_LBAs_Read ------ 100 253 000 - 10247636139 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4120 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 4800 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 28/37 Celsius +Lifetime Min/Max Temperature: 15/39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 161 --- Lifetime Power-On Resets +0x01 0x010 4 7826 --- Power-on Hours +0x01 0x018 6 30221909944 --- Logical Sectors Written +0x01 0x020 6 291136416 --- Number of Write Commands +0x01 0x028 6 10247731579 --- Logical Sectors Read +0x01 0x030 6 69444226 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 7825 --- Spindle Motor Power-on Hours +0x03 0x010 4 1581 --- Head Flying Hours +0x03 0x018 4 442 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 29 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM010-2EP102/C2BDB604D384 b/HDD/Seagate/ST1000/ST1000DM010-2EP102/C2BDB604D384 new file mode 100644 index 000000000..dcf13f432 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM010-2EP102/C2BDB604D384 @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST1000DM010-2EP102 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC43 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 25 07:49:48 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 103) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 078 063 006 - 62380808 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 161 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 080 060 045 - 100958320 + 9 Power_On_Hours -O--CK 092 092 000 - 7826 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 161 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 064 061 040 - 36 (Min/Max 29/37) +193 Load_Cycle_Count -O--CK 100 100 000 - 444 +194 Temperature_Celsius -O---K 036 016 000 - 36 (0 16 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 002 001 000 - 62380808 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 7779h+04m+50.845s +241 Total_LBAs_Written ------ 100 253 000 - 32333550622 +242 Total_LBAs_Read ------ 100 253 000 - 10844967881 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4120 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 4800 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 28/37 Celsius +Lifetime Min/Max Temperature: 16/40 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 161 --- Lifetime Power-On Resets +0x01 0x010 4 7826 --- Power-on Hours +0x01 0x018 6 32336139286 --- Logical Sectors Written +0x01 0x020 6 293669478 --- Number of Write Commands +0x01 0x028 6 10844980593 --- Logical Sectors Read +0x01 0x030 6 73729131 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 7826 --- Spindle Motor Power-on Hours +0x03 0x010 4 1565 --- Head Flying Hours +0x03 0x018 4 444 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 30 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000DM010-2EP102/CA7845C6060B b/HDD/Seagate/ST1000/ST1000DM010-2EP102/CA7845C6060B new file mode 100644 index 000000000..5239d203b --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000DM010-2EP102/CA7845C6060B @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST1000DM010-2EP102 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC43 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 17:30:45 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 106) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 083 063 006 - 223320473 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 121 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 088 060 045 - 740446471 + 9 Power_On_Hours -O--CK 080 080 000 - 17602 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 123 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 0 0 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 056 046 040 - 44 (Min/Max 23/46) +193 Load_Cycle_Count -O--CK 100 100 000 - 818 +194 Temperature_Celsius -O---K 044 016 000 - 44 (0 16 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 008 001 000 - 223320473 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 +240 Head_Flying_Hours ------ 100 253 000 - 17450h+58m+11.885s +241 Total_LBAs_Written ------ 100 253 000 - 124076590368 +242 Total_LBAs_Read ------ 100 253 000 - 15825010321 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4120 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 4800 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1135 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 24/46 Celsius +Lifetime Min/Max Temperature: 17/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 123 --- Lifetime Power-On Resets +0x01 0x010 4 17602 --- Power-on Hours +0x01 0x018 6 124121505760 --- Logical Sectors Written +0x01 0x020 6 1920027725 --- Number of Write Commands +0x01 0x028 6 15828049568 --- Logical Sectors Read +0x01 0x030 6 210916945 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 17601 --- Spindle Motor Power-on Hours +0x03 0x010 4 1291 --- Head Flying Hours +0x03 0x018 4 818 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x010 1 44 --- Average Short Term Temperature +0x05 0x018 1 47 --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 51 --- Highest Average Short Term Temperature +0x05 0x038 1 33 --- Lowest Average Short Term Temperature +0x05 0x040 1 49 --- Highest Average Long Term Temperature +0x05 0x048 1 35 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/2979C6E06D60 b/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/2979C6E06D60 new file mode 100644 index 000000000..03c490207 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/2979C6E06D60 @@ -0,0 +1,101 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Samsung SpinPoint M8 (AF) +Device Model: ST1000LM024 HN-M101MBB +Serial Number: -- +LU WWN Device Id: 5 0004cf ... +Firmware Version: 2BA30001 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 11:04:37 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12660) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 211) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 2 + 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 + 3 Spin_Up_Time 0x0023 092 091 025 Pre-fail Always - 2664 + 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1967 + 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 + 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 14987 + 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 116 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1957 +191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 5 +192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 +194 Temperature_Celsius 0x0002 057 047 000 Old_age Always - 43 (Min/Max 12/57) +195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3980 +223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 116 +225 Load_Cycle_Count 0x0032 039 039 000 Old_age Always - 619375 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/75681D234328 b/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/75681D234328 new file mode 100644 index 000000000..6eef15db3 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/75681D234328 @@ -0,0 +1,202 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Samsung SpinPoint M8 (AF) +Device Model: ST1000LM024 HN-M101MBB +Serial Number: -- +LU WWN Device Id: 5 0004cf ... +Firmware Version: 2BA30003 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 01:10:23 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12480) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 208) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 134 + 2 Throughput_Performance -OS--K 056 056 000 - 11336 + 3 Spin_Up_Time PO---K 094 092 025 - 1994 + 4 Start_Stop_Count -O--CK 098 098 000 - 2893 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6092 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 11 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2940 + 13 Read_Soft_Error_Rate -O-RCK 100 100 000 - 0 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 1114568 +191 G-Sense_Error_Rate -O---K 100 100 000 - 697 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +193 Load_Cycle_Count -O--CK 076 076 000 - 251332 +194 Temperature_Celsius -O---- 063 051 000 - 37 (Min/Max 18/49) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 252 252 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 4785 +240 Head_Flying_Hours -O--CK 100 100 000 - 5489 +241 Total_LBAs_Written -O--CK 098 094 000 - 3737786 +242 Total_LBAs_Read -O--CK 098 094 000 - 3121079 +254 Free_Fall_Sensor -O--CK 252 252 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xc0-0xdf GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 588 - +# 2 Short offline Completed without error 00% 584 - +# 3 Short offline Completed without error 00% 519 - +# 4 Short offline Aborted by host 40% 519 - +# 5 Short offline Completed without error 00% 0 - +# 6 Short offline Interrupted (host reset) 40% 0 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 36/38 Celsius +Lifetime Min/Max Temperature: 18/49 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 5 minutes +Temperature Logging Interval: 5 minutes +Min/Max recommended Temperature: -5/80 Celsius +Min/Max Temperature Limit: -10/85 Celsius +Temperature History Size (Index): 128 (111) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 19 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8e00 4 0 Vendor specific +0x8e01 4 0 Vendor specific +0x8e02 4 0 Vendor specific +0x8e03 4 0 Vendor specific +0x8e04 4 0 Vendor specific +0x8e05 4 0 Vendor specific +0x8e06 4 0 Vendor specific +0x8e07 4 0 Vendor specific +0x8e08 4 0 Vendor specific +0x8e09 4 0 Vendor specific +0x8e0a 4 0 Vendor specific +0x8e0b 4 0 Vendor specific +0x8e0c 4 0 Vendor specific +0x8e0d 4 0 Vendor specific +0x8e0e 4 0 Vendor specific +0x8e0f 4 0 Vendor specific +0x8e10 4 0 Vendor specific +0x8e11 4 0 Vendor specific + diff --git a/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/B61018F9EBE9 b/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/B61018F9EBE9 new file mode 100644 index 000000000..ed397672a --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/B61018F9EBE9 @@ -0,0 +1,340 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Samsung SpinPoint M8 (AF) +Device Model: ST1000LM024 HN-M101MBB +Serial Number: -- +LU WWN Device Id: 5 0004cf ... +Firmware Version: 2AR10001 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Sep 22 21:17:26 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12960) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 216) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 732 + 2 Throughput_Performance -OS--K 252 252 000 - 0 + 3 Spin_Up_Time PO---K 089 089 025 - 3454 + 4 Start_Stop_Count -O--CK 097 097 000 - 3174 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 17955 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2908 +191 G-Sense_Error_Rate -O---K 100 100 000 - 230 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +194 Temperature_Celsius -O---- 057 056 000 - 43 (Min/Max 16/50) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 7 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-K 001 001 000 - 53616 +223 Load_Retry_Count -O--CK 099 099 000 - 1083 +225 Load_Cycle_Count -O--CK 037 037 000 - 644740 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xc0-0xdf GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 429 (device log contains only the most recent 8 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 429 [4] occurred at disk power-on lifetime: 17944 hours (747 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 55 09 48 48 40 00 Error: UNC at LBA = 0x55094848 = 1426671688 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 55 09 47 d0 40 08 00:00:00.217 READ FPDMA QUEUED + 60 00 00 00 10 00 00 55 20 d7 c0 40 08 00:00:00.261 READ FPDMA QUEUED + 60 00 00 00 08 00 00 46 75 40 d8 40 08 00:00:00.261 READ FPDMA QUEUED + 61 00 00 00 10 00 00 52 06 a2 68 40 08 00:00:00.261 WRITE FPDMA QUEUED + 60 00 00 00 28 00 00 30 07 73 70 40 08 00:00:00.261 READ FPDMA QUEUED + +Error 428 [3] occurred at disk power-on lifetime: 17944 hours (747 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 55 09 48 48 40 00 Error: UNC at LBA = 0x55094848 = 1426671688 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 55 09 47 d0 40 08 00:00:00.187 READ FPDMA QUEUED + 60 00 00 00 10 00 00 55 20 d7 c0 40 08 00:00:00.259 READ FPDMA QUEUED + 60 00 00 00 08 00 00 46 75 40 d8 40 08 00:00:00.259 READ FPDMA QUEUED + 61 00 00 00 10 00 00 52 06 a2 68 40 08 00:00:00.259 WRITE FPDMA QUEUED + 60 00 00 00 28 00 00 30 07 73 70 40 08 00:00:00.259 READ FPDMA QUEUED + +Error 427 [2] occurred at disk power-on lifetime: 17944 hours (747 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 55 09 48 48 40 00 Error: UNC at LBA = 0x55094848 = 1426671688 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 55 09 47 d0 40 08 00:00:00.186 READ FPDMA QUEUED + 60 00 00 00 10 00 00 55 20 d7 c0 40 08 00:00:00.257 READ FPDMA QUEUED + 60 00 00 00 08 00 00 46 75 40 d8 40 08 00:00:00.257 READ FPDMA QUEUED + 61 00 00 00 10 00 00 52 06 a2 68 40 08 00:00:00.257 WRITE FPDMA QUEUED + 60 00 00 00 28 00 00 30 07 73 70 40 08 00:00:00.257 READ FPDMA QUEUED + +Error 426 [1] occurred at disk power-on lifetime: 17944 hours (747 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 55 09 48 48 40 00 Error: UNC at LBA = 0x55094848 = 1426671688 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 55 09 47 d0 40 08 00:00:00.186 READ FPDMA QUEUED + 60 00 00 00 10 00 00 55 20 d7 c0 40 08 00:00:00.255 READ FPDMA QUEUED + 60 00 00 00 08 00 00 46 75 40 d8 40 08 00:00:00.255 READ FPDMA QUEUED + 61 00 00 00 10 00 00 52 06 a2 68 40 08 00:00:00.255 WRITE FPDMA QUEUED + 60 00 00 00 28 00 00 30 07 73 70 40 08 00:00:00.255 READ FPDMA QUEUED + +Error 425 [0] occurred at disk power-on lifetime: 17944 hours (747 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 55 09 48 48 40 00 Error: WP at LBA = 0x55094848 = 1426671688 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 10 00 00 52 06 a2 68 40 08 00:00:00.227 WRITE FPDMA QUEUED + 60 00 00 01 00 00 00 55 09 47 d0 40 08 00:00:00.186 READ FPDMA QUEUED + 60 00 00 00 28 00 00 30 07 73 70 40 08 00:00:00.225 READ FPDMA QUEUED + 60 00 00 00 88 00 00 60 35 fd 48 40 08 00:00:00.225 READ FPDMA QUEUED + 60 00 00 00 58 00 00 60 a3 c2 30 40 08 00:00:00.225 READ FPDMA QUEUED + +Error 424 [7] occurred at disk power-on lifetime: 17944 hours (747 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 55 09 48 48 40 00 Error: UNC at LBA = 0x55094848 = 1426671688 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 55 09 47 d0 40 08 00:00:00.185 READ FPDMA QUEUED + 60 00 00 00 48 00 00 60 3a 40 68 40 08 00:00:00.223 READ FPDMA QUEUED + 60 00 00 01 00 00 00 30 82 29 b0 40 08 00:00:00.223 READ FPDMA QUEUED + 60 00 00 00 68 00 00 30 8c ee 10 40 08 00:00:00.223 READ FPDMA QUEUED + 60 00 00 01 00 00 00 55 09 4a d0 40 08 00:00:00.223 READ FPDMA QUEUED + +Error 423 [6] occurred at disk power-on lifetime: 17944 hours (747 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 55 09 48 48 40 00 Error: UNC at LBA = 0x55094848 = 1426671688 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 55 09 47 d0 40 08 00:00:00.185 READ FPDMA QUEUED + 60 00 00 00 48 00 00 60 3a 40 68 40 08 00:00:00.221 READ FPDMA QUEUED + 60 00 00 01 00 00 00 30 82 29 b0 40 08 00:00:00.221 READ FPDMA QUEUED + 60 00 00 00 68 00 00 30 8c ee 10 40 08 00:00:00.221 READ FPDMA QUEUED + 60 00 00 01 00 00 00 55 09 4a d0 40 08 00:00:00.221 READ FPDMA QUEUED + +Error 422 [5] occurred at disk power-on lifetime: 17944 hours (747 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 55 09 48 48 40 00 Error: UNC at LBA = 0x55094848 = 1426671688 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 55 09 47 d0 40 08 00:00:00.185 READ FPDMA QUEUED + 60 00 00 00 48 00 00 60 3a 40 68 40 08 00:00:00.219 READ FPDMA QUEUED + 60 00 00 01 00 00 00 30 82 29 b0 40 08 00:00:00.219 READ FPDMA QUEUED + 60 00 00 00 68 00 00 30 8c ee 10 40 08 00:00:00.219 READ FPDMA QUEUED + 60 00 00 01 00 00 00 55 09 4a d0 40 08 00:00:00.219 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 22/43 Celsius +Lifetime Min/Max Temperature: 14/50 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 5 minutes +Temperature Logging Interval: 5 minutes +Min/Max recommended Temperature: -5/80 Celsius +Min/Max Temperature Limit: -10/85 Celsius +Temperature History Size (Index): 128 (54) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8e00 4 0 Vendor specific +0x8e01 4 0 Vendor specific +0x8e02 4 0 Vendor specific +0x8e03 4 0 Vendor specific +0x8e04 4 0 Vendor specific +0x8e05 4 0 Vendor specific +0x8e06 4 0 Vendor specific +0x8e07 4 0 Vendor specific +0x8e08 4 0 Vendor specific +0x8e09 4 0 Vendor specific +0x8e0a 4 0 Vendor specific +0x8e0b 4 0 Vendor specific +0x8e0c 4 0 Vendor specific +0x8e0d 4 0 Vendor specific +0x8e0e 4 0 Vendor specific +0x8e0f 4 0 Vendor specific +0x8e10 4 0 Vendor specific +0x8e11 4 0 Vendor specific + diff --git a/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/CA1E6FB2B1CF b/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/CA1E6FB2B1CF new file mode 100644 index 000000000..3c1236ac8 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/CA1E6FB2B1CF @@ -0,0 +1,103 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Samsung SpinPoint M8 (AF) +Device Model: ST1000LM024 HN-M101MBB +Serial Number: -- +LU WWN Device Id: 5 0004cf ... +Firmware Version: 2BA30001 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Oct 20 16:43:55 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 202) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 200 + 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 + 3 Spin_Up_Time 0x0023 092 091 025 Pre-fail Always - 2538 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 121 + 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 + 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 25795 + 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 899 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 131 +191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 24 +194 Temperature_Celsius 0x0002 064 062 000 Old_age Always - 28 (Min/Max 18/44) +195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 80361 +223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 899 +225 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 4267804 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/FA45E65A30E7 b/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/FA45E65A30E7 new file mode 100644 index 000000000..22dd5808c --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM024 HN-M101MBB/FA45E65A30E7 @@ -0,0 +1,194 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Samsung SpinPoint M8 (AF) +Device Model: ST1000LM024 HN-M101MBB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 2BA30001 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 14 22:30:44 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12960) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 216) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 58 + 2 Throughput_Performance -OS--K 056 056 000 - 11793 + 3 Spin_Up_Time PO---K 092 090 025 - 2569 + 4 Start_Stop_Count -O--CK 100 100 000 - 71 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 46254 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 126 + 12 Power_Cycle_Count -O--CK 100 100 000 - 85 +191 G-Sense_Error_Rate -O---K 100 100 000 - 1 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +194 Temperature_Celsius -O---- 064 064 000 - 34 (Min/Max 15/39) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 252 252 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 8782 +223 Load_Retry_Count -O--CK 100 100 000 - 126 +225 Load_Cycle_Count -O--CK 001 001 000 - 5034087 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xc0-0xdf GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2093 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 20/39 Celsius +Lifetime Min/Max Temperature: 15/39 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 5 minutes +Temperature Logging Interval: 5 minutes +Min/Max recommended Temperature: -5/80 Celsius +Min/Max Temperature Limit: -10/85 Celsius +Temperature History Size (Index): 128 (14) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 29 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 31 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8e00 4 0 Vendor specific +0x8e01 4 0 Vendor specific +0x8e02 4 0 Vendor specific +0x8e03 4 0 Vendor specific +0x8e04 4 0 Vendor specific +0x8e05 4 0 Vendor specific +0x8e06 4 0 Vendor specific +0x8e07 4 0 Vendor specific +0x8e08 4 0 Vendor specific +0x8e09 4 0 Vendor specific +0x8e0a 4 0 Vendor specific +0x8e0b 4 0 Vendor specific +0x8e0c 4 0 Vendor specific +0x8e0d 4 0 Vendor specific +0x8e0e 4 0 Vendor specific +0x8e0f 4 0 Vendor specific +0x8e10 4 0 Vendor specific +0x8e11 4 0 Vendor specific + + + diff --git a/HDD/Seagate/ST1000/ST1000LM035-1RK172/0FCEF82E20E1 b/HDD/Seagate/ST1000/ST1000LM035-1RK172/0FCEF82E20E1 new file mode 100644 index 000000000..877002143 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM035-1RK172/0FCEF82E20E1 @@ -0,0 +1,104 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Mobile HDD +Device Model: ST1000LM035-1RK172 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: RSM4 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 15:57:59 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 163) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 084 076 --- Pre-fail Always - 236933960 + 3 Spin_Up_Time 0x0023 099 099 --- Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 --- Old_age Always - 405 + 5 Reallocated_Sector_Ct 0x0033 100 100 --- Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002f 100 253 --- Pre-fail Always - 202118 + 9 Power_On_Hours 0x0032 098 098 --- Old_age Always - 2005 (206 138 0) + 10 Spin_Retry_Count 0x0033 100 100 --- Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 394 +183 Runtime_Bad_Block 0x0032 100 100 --- Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 --- Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 --- Old_age Always - 6 +189 High_Fly_Writes 0x003a 100 100 --- Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 070 058 --- Old_age Always - 30 (Min/Max 28/30) +191 G-Sense_Error_Rate 0x0032 100 100 --- Old_age Always - 0 +192 Power-Off_Retract_Count 0x0022 100 100 --- Old_age Always - 84 +193 Load_Cycle_Count 0x0032 100 100 --- Old_age Always - 781 +194 Temperature_Celsius 0x0022 030 042 --- Old_age Always - 30 (0 9 0 0 0) +196 Reallocated_Event_Count 0x0032 100 100 --- Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 --- Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 --- Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 --- Old_age Always - 0 +254 Free_Fall_Sensor 0x0032 100 100 --- Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST1000/ST1000LM035-1RK172/1A642B4FB80E b/HDD/Seagate/ST1000/ST1000LM035-1RK172/1A642B4FB80E new file mode 100644 index 000000000..74e9e9c96 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM035-1RK172/1A642B4FB80E @@ -0,0 +1,104 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Mobile HDD +Device Model: ST1000LM035-1RK172 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: RSM4 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 15:57:21 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 165) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 084 076 --- Pre-fail Always - 235523614 + 3 Spin_Up_Time 0x0023 099 099 --- Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 --- Old_age Always - 291 + 5 Reallocated_Sector_Ct 0x0033 100 100 --- Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002f 100 253 --- Pre-fail Always - 198299 + 9 Power_On_Hours 0x0032 098 098 --- Old_age Always - 2524 (143 127 0) + 10 Spin_Retry_Count 0x0033 100 100 --- Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 286 +183 Runtime_Bad_Block 0x0032 100 100 --- Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 --- Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 --- Old_age Always - 10 +189 High_Fly_Writes 0x003a 100 100 --- Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 070 057 --- Old_age Always - 30 (Min/Max 28/30) +191 G-Sense_Error_Rate 0x0032 100 100 --- Old_age Always - 1 +192 Power-Off_Retract_Count 0x0022 100 100 --- Old_age Always - 65 +193 Load_Cycle_Count 0x0032 100 100 --- Old_age Always - 616 +194 Temperature_Celsius 0x0022 030 043 --- Old_age Always - 30 (0 10 0 0 0) +196 Reallocated_Event_Count 0x0032 100 100 --- Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 --- Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 --- Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 --- Old_age Always - 0 +254 Free_Fall_Sensor 0x0032 100 100 --- Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST1000/ST1000LM035-1RK172/1D34C704D751 b/HDD/Seagate/ST1000/ST1000LM035-1RK172/1D34C704D751 new file mode 100644 index 000000000..2cf4db25b --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM035-1RK172/1D34C704D751 @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Mobile HDD +Device Model: ST1000LM035-1RK172 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM2 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 14:57:18 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 164) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 078 063 006 - 66718909 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1740 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 089 060 045 - 5062098741 + 9 Power_On_Hours -O--CK 094 094 000 - 5609 (33 33 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1739 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 073 053 040 - 27 (Min/Max 25/27) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 3 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 32 +193 Load_Cycle_Count -O--CK 099 099 000 - 2169 +194 Temperature_Celsius -O---K 027 047 000 - 27 (0 16 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 5604 (151 66 0) +241 Total_LBAs_Written ------ 100 253 000 - 7248063116 +242 Total_LBAs_Read ------ 100 253 000 - 4781652950 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 25/27 Celsius +Lifetime Min/Max Temperature: 16/52 Celsius +Specified Max Operating Temperature: 37 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (6) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1739 --- Lifetime Power-On Resets +0x01 0x010 4 5609 --- Power-on Hours +0x01 0x018 6 7248375340 --- Logical Sectors Written +0x01 0x020 6 82983666 --- Number of Write Commands +0x01 0x028 6 4781667350 --- Logical Sectors Read +0x01 0x030 6 373603242 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5607 --- Spindle Motor Power-on Hours +0x03 0x010 4 5108 --- Head Flying Hours +0x03 0x018 4 2169 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 10 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000LM035-1RK172/31E621AA7E1A b/HDD/Seagate/ST1000/ST1000LM035-1RK172/31E621AA7E1A new file mode 100644 index 000000000..4c4c972a9 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM035-1RK172/31E621AA7E1A @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Mobile HDD +Device Model: ST1000LM035-1RK172 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: RSM4 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 27 21:16:01 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 164) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 081 064 006 - 134737999 + 3 Spin_Up_Time PO---K 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 094 094 000 - 6813 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-K 082 060 045 - 150790941 + 9 Power_On_Hours -O--CK 087 087 000 - 12050 (177 72 0) + 10 Spin_Retry_Count PO--CK 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 594 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 072 051 040 - 28 (Min/Max 28/28) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 15 +192 Power-Off_Retract_Count -O---K 100 100 000 - 34 +193 Load_Cycle_Count -O--CK 034 034 000 - 132633 +194 Temperature_Celsius -O---K 028 049 000 - 28 (0 15 0 0 0) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xb6 GPL VS 1920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 30% 2733 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 28/29 Celsius +Lifetime Min/Max Temperature: 15/49 Celsius +Specified Max Operating Temperature: 55 Celsius +Under/Over Temperature Limit Count: 0/2 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (9) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 594 --- Lifetime Power-On Resets +0x01 0x010 4 12050 --- Power-on Hours +0x01 0x018 6 27034446690 --- Logical Sectors Written +0x01 0x020 6 192407952 --- Number of Write Commands +0x01 0x028 6 70543024804 --- Logical Sectors Read +0x01 0x030 6 364166444 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8963 --- Spindle Motor Power-on Hours +0x03 0x010 4 890 --- Head Flying Hours +0x03 0x018 4 132633 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 4 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST1000/ST1000LM035-1RK172/9FE786C74223 b/HDD/Seagate/ST1000/ST1000LM035-1RK172/9FE786C74223 new file mode 100644 index 000000000..f11b97f5e --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM035-1RK172/9FE786C74223 @@ -0,0 +1,103 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Mobile HDD +Device Model: ST1000LM035-1RK172 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM4 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 16:02:30 2020 +10 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 166) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 083 064 006 Pre-fail Always - 204370051 + 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 838 + 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 074 060 045 Pre-fail Always - 22442272 + 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2366 (214 185 0) + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 363 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 099 000 Old_age Always - 2 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 075 049 040 Old_age Always - 25 (Min/Max 21/25) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 4 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 51 +193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7589 +194 Temperature_Celsius 0x0022 025 051 000 Old_age Always - 25 (0 15 0 0 0) +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1883 (31 179 0) +241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 9420246758 +242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7694880868 +254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Seagate/ST1000/ST1000LM048-2E7172/9CB193E554DC b/HDD/Seagate/ST1000/ST1000LM048-2E7172/9CB193E554DC new file mode 100644 index 000000000..c9ff8e537 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM048-2E7172/9CB193E554DC @@ -0,0 +1,208 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST1000LM048-2E7172 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 20 16:36:58 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 165) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 082 064 006 - 164269062 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 948 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 082 060 045 - 143459176 + 9 Power_On_Hours -O--CK 093 093 000 - 6226 (134 6 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 781 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 065 052 040 - 35 (Min/Max 22/36) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 4 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 785 +193 Load_Cycle_Count -O--CK 001 001 000 - 260959 +194 Temperature_Celsius -O---K 035 048 000 - 35 (0 11 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 5500 (79 195 0) +241 Total_LBAs_Written ------ 100 253 000 - 19539162682 +242 Total_LBAs_Read ------ 100 253 000 - 9189936697 +254 Free_Fall_Sensor -O--CK 001 001 000 - 777 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2189 - +# 2 Short offline Completed without error 00% 45 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 22/36 Celsius +Lifetime Min/Max Temperature: 11/51 Celsius +Specified Max Operating Temperature: 34 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (22) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 781 --- Lifetime Power-On Resets +0x01 0x010 4 6226 --- Power-on Hours +0x01 0x018 6 19541337584 --- Logical Sectors Written +0x01 0x020 6 343105478 --- Number of Write Commands +0x01 0x028 6 9189989665 --- Logical Sectors Read +0x01 0x030 6 320488254 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6224 --- Spindle Motor Power-on Hours +0x03 0x010 4 246 --- Head Flying Hours +0x03 0x018 4 260959 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST1000/ST1000LM048-2E7172/AD0E1E9636CE b/HDD/Seagate/ST1000/ST1000LM048-2E7172/AD0E1E9636CE new file mode 100644 index 000000000..b5c85f782 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LM048-2E7172/AD0E1E9636CE @@ -0,0 +1,208 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST1000LM048-2E7172 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 25 16:10:11 2020 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 164) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 082 064 006 - 159299166 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 096 096 020 - 4594 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 082 060 045 - 167318128 + 9 Power_On_Hours -O--CK 097 097 000 - 3296 (138 59 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 096 096 020 - 4519 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 8590065672 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 057 048 040 - 43 (Min/Max 35/46) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 265 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 82 +193 Load_Cycle_Count -O--CK 088 088 000 - 25270 +194 Temperature_Celsius -O---K 043 052 000 - 43 (0 20 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 3241 (205 225 0) +241 Total_LBAs_Written ------ 100 253 000 - 10138425347 +242 Total_LBAs_Read ------ 100 253 000 - 7355661989 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2858 - +# 2 Short offline Completed without error 00% 2847 - +# 3 Vendor (0x50) Fatal or unknown error 90% 0 0 +# 4 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 35/46 Celsius +Lifetime Min/Max Temperature: 20/52 Celsius +Specified Max Operating Temperature: 39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (73) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4519 --- Lifetime Power-On Resets +0x01 0x010 4 3296 --- Power-on Hours +0x01 0x018 6 10139102404 --- Logical Sectors Written +0x01 0x020 6 128573105 --- Number of Write Commands +0x01 0x028 6 7361110949 --- Logical Sectors Read +0x01 0x030 6 69604189 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3284 --- Spindle Motor Power-on Hours +0x03 0x010 4 1570 --- Head Flying Hours +0x03 0x018 4 25270 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 12 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST1000/ST1000LX015-1U7172/FEEDAC60F15D b/HDD/Seagate/ST1000/ST1000LX015-1U7172/FEEDAC60F15D new file mode 100644 index 000000000..50aa6e883 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000LX015-1U7172/FEEDAC60F15D @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate FireCuda 2.5 +Device Model: ST1000LX015-1U7172 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:39:48 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 1 (minimum power consumption with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 168) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 083 064 006 - 193458544 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 097 097 020 - 3379 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 075 060 045 - 30602821 + 9 Power_On_Hours -O--CK 088 088 000 - 11212 (50 91 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 303 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 098 000 - 35 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 068 050 040 - 32 (Min/Max 31/34) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 2 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 26 +193 Load_Cycle_Count -O--CK 098 098 000 - 4925 +194 Temperature_Celsius -O---K 032 050 000 - 32 (0 18 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 333h+40m+34.314s +241 Total_LBAs_Written ------ 100 253 000 - 3059556480 +242 Total_LBAs_Read ------ 100 253 000 - 4702346463 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 6920 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 7680 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 25/34 Celsius +Lifetime Min/Max Temperature: 18/50 Celsius +Specified Max Operating Temperature: 35 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (11) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 303 --- Lifetime Power-On Resets +0x01 0x010 4 11212 --- Power-on Hours +0x01 0x018 6 3060068208 --- Logical Sectors Written +0x01 0x020 6 33506213 --- Number of Write Commands +0x01 0x028 6 4709042863 --- Logical Sectors Read +0x01 0x030 6 85715841 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 367 --- Spindle Motor Power-on Hours +0x03 0x010 4 212 --- Head Flying Hours +0x03 0x018 4 4925 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 2 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 35 --- Resets Between Cmd Acceptance and Completion +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST1000/ST1000NM0055-1V410C/9FFC5E0D2343 b/HDD/Seagate/ST1000/ST1000NM0055-1V410C/9FFC5E0D2343 new file mode 100644 index 000000000..250320ac7 --- /dev/null +++ b/HDD/Seagate/ST1000/ST1000NM0055-1V410C/9FFC5E0D2343 @@ -0,0 +1,108 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Enterprise Capacity 3.5 HDD +Device Model: ST1000NM0055-1V410C +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Add. Product Id: DELL(tm) +Firmware Version: DA03 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 26 09:05:54 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 90) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 84) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x010f 075 064 044 Pre-fail Always - 35289417 + 3 Spin_Up_Time 0x0103 096 095 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 17 + 5 Reallocated_Sector_Ct 0x0133 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 087 060 045 Pre-fail Always - 462138970 + 9 Power_On_Hours 0x0032 063 063 000 Old_age Always - 33025 (253 7 0) + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 11 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 073 067 040 Old_age Always - 27 (Min/Max 23/33) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 96 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1302 +193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1439 +194 Temperature_Celsius 0x0022 027 040 000 Old_age Always - 27 (0 20 0 0 0) +195 Hardware_ECC_Recovered 0x001a 001 001 000 Old_age Always - 35289417 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 32836h+54m+25.219s +241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1164845725 +242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 91146875 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2 - +# 2 Vendor (0xdf) Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Seagate/ST1200/ST12000NM0007-2A1101/922D7C793905 b/HDD/Seagate/ST1200/ST12000NM0007-2A1101/922D7C793905 new file mode 100644 index 000000000..67abb84fa --- /dev/null +++ b/HDD/Seagate/ST1200/ST12000NM0007-2A1101/922D7C793905 @@ -0,0 +1,234 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Exos X12 +Device Model: ST12000NM0007-2A1101 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SN02 +User Capacity: 12,000,138,625,024 bytes [12.0 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Nov 1 08:23:33 2020 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 567) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: (1083) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 064 044 - 126885728 + 3 Spin_Up_Time PO---- 090 089 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 12 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 087 060 045 - 558757807 + 9 Power_On_Hours -O--CK 081 081 000 - 17044 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 12 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 062 048 040 - 38 (Min/Max 33/51) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 16 +193 Load_Cycle_Count -O--CK 055 055 000 - 91315 +194 Temperature_Celsius -O---K 038 051 000 - 38 (0 27 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 081 020 000 - 126885728 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate PO---K 100 100 001 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 7037h+21m+32.299s +241 Total_LBAs_Written ------ 100 253 000 - 36278287566 +242 Total_LBAs_Read ------ 100 253 000 - 398376946866 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 768 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 16320 Device vendor specific log +0xa4 GPL,SL VS 160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 8 Device vendor specific log +0xc3 GPL,SL VS 32 Device vendor specific log +0xc9 GPL,SL VS 8 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd1 GPL VS 336 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 33/51 Celsius +Lifetime Min/Max Temperature: 24/51 Celsius +Under/Over Temperature Limit Count: 0/1839 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 10/40 Celsius +Min/Max Temperature Limit: 5/60 Celsius +Temperature History Size (Index): 128 (54) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 17044 --- Power-on Hours +0x01 0x018 6 36278240982 --- Logical Sectors Written +0x01 0x020 6 174789373 --- Number of Write Commands +0x01 0x028 6 398301775954 --- Logical Sectors Read +0x01 0x030 6 2323507836 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2337661241 N-- Spindle Motor Power-on Hours +0x03 0x010 4 2337655084 N-- Head Flying Hours +0x03 0x018 4 91315 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 16 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 38 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 32 --- Lowest Average Short Term Temperature +0x05 0x040 1 41 --- Highest Average Long Term Temperature +0x05 0x048 1 34 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 970 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 68 --- Number of Hardware Resets +0x06 0x010 4 42 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x008 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST2000/ST2000DL003-9VT166/17B59D1E3C09 b/HDD/Seagate/ST2000/ST2000DL003-9VT166/17B59D1E3C09 new file mode 100644 index 000000000..31073f5b1 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DL003-9VT166/17B59D1E3C09 @@ -0,0 +1,192 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda Green (AF) +Device Model: ST2000DL003-9VT166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC32 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5900 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 11:00:46 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 0 (vendor specific), recommended: 254 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 612) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 346) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30b7) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 103 076 006 - 5470648 + 3 Spin_Up_Time PO---- 088 070 000 - 0 + 4 Start_Stop_Count -O--CK 081 081 020 - 20126 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 142895424 + 9 Power_On_Hours -O--CK 088 011 000 - 10888 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 190 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 001 001 000 - 1728 +188 Command_Timeout -O--CK 100 097 000 - 8590065671 +189 High_Fly_Writes -O-RCK 097 097 000 - 3 +190 Airflow_Temperature_Cel -O---K 071 055 045 - 29 (Min/Max 26/31) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 126 +193 Load_Cycle_Count -O--CK 090 090 000 - 20130 +194 Temperature_Celsius -O---K 029 045 000 - 29 (0 22 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 007 003 000 - 5470648 +197 Current_Pending_Sector -O--C- 100 100 000 - 16 +198 Offline_Uncorrectable ----C- 100 100 000 - 16 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 53535 (141 153 0) +241 Total_LBAs_Written ------ 100 253 000 - 3131174511 +242 Total_LBAs_Read ------ 100 253 000 - 369834306 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2819 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 7247 - +# 2 Short offline Completed without error 00% 7223 - +# 3 Short offline Completed without error 00% 7199 - +# 4 Short offline Completed without error 00% 7175 - +# 5 Short offline Completed without error 00% 7151 - +# 6 Short offline Completed without error 00% 7127 - +# 7 Short offline Completed without error 00% 7103 - +# 8 Short offline Completed without error 00% 7079 - +# 9 Short offline Completed without error 00% 7060 - +#10 Short offline Completed without error 00% 7024 - +#11 Short offline Completed without error 00% 7000 - +#12 Short offline Completed without error 00% 6976 - +#13 Short offline Completed without error 00% 6952 - +#14 Extended offline Completed without error 00% 6938 - +#15 Short offline Aborted by host 90% 6928 - +#16 Short offline Completed without error 00% 6904 - +#17 Short offline Completed without error 00% 6880 - +#18 Short offline Completed without error 00% 6856 - +#19 Short offline Completed without error 00% 6832 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 26/31 Celsius +Lifetime Min/Max Temperature: 22/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (2) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 36 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000DL003-9VT166/B75B576124C8 b/HDD/Seagate/ST2000/ST2000DL003-9VT166/B75B576124C8 new file mode 100644 index 000000000..940bb60b2 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DL003-9VT166/B75B576124C8 @@ -0,0 +1,312 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda Green (AF) +Device Model: ST2000DL003-9VT166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC32 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5900 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Sep 9 08:43:25 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 0 (vendor specific), recommended: 254 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 623) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 352) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30b7) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 119 099 006 - 224468960 + 3 Spin_Up_Time PO---- 088 086 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1392 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 133560454 + 9 Power_On_Hours -O--CK 052 052 000 - 42359 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1356 +183 Runtime_Bad_Block -O--CK 095 095 000 - 5 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 089 089 000 - 11 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 011 011 000 - 89 +190 Airflow_Temperature_Cel -O---K 065 048 045 - 35 (Min/Max 32/40) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1222 +193 Load_Cycle_Count -O--CK 100 100 000 - 1414 +194 Temperature_Celsius -O---K 035 052 000 - 35 (0 14 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 034 004 000 - 224468960 +197 Current_Pending_Sector -O--C- 100 099 000 - 0 +198 Offline_Uncorrectable ----C- 100 099 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 42331 (152 182 0) +241 Total_LBAs_Written ------ 100 253 000 - 3506524778 +242 Total_LBAs_Read ------ 100 253 000 - 2924379996 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2819 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 7 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 7 [6] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:34.411 READ FPDMA QUEUED + 27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:34.406 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 00 11d+15:27:34.405 IDENTIFY DEVICE + ef 00 03 00 45 00 00 00 00 00 00 a0 00 11d+15:27:34.405 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:34.405 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 6 [5] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:31.011 READ FPDMA QUEUED + 27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:31.002 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 00 11d+15:27:31.001 IDENTIFY DEVICE + ef 00 03 00 45 00 00 00 00 00 00 a0 00 11d+15:27:31.001 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:31.001 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 5 [4] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:27.613 READ FPDMA QUEUED + 27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:27.608 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 00 11d+15:27:27.607 IDENTIFY DEVICE + ef 00 03 00 45 00 00 00 00 00 00 a0 00 11d+15:27:27.607 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:27.607 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 4 [3] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:24.190 READ FPDMA QUEUED + 60 00 00 00 40 00 00 44 00 01 48 40 00 11d+15:27:24.189 READ FPDMA QUEUED + 27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:24.183 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 00 11d+15:27:24.183 IDENTIFY DEVICE + ef 00 03 00 45 00 00 00 00 00 00 a0 00 11d+15:27:24.183 SET FEATURES [Set transfer mode] + +Error 3 [2] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 00 45 80 02 88 40 00 11d+15:27:20.773 READ FPDMA QUEUED + 60 00 00 00 40 00 00 44 00 01 48 40 00 11d+15:27:20.773 READ FPDMA QUEUED + 60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:20.773 READ FPDMA QUEUED + 60 00 00 00 40 00 00 45 80 01 88 40 00 11d+15:27:20.772 READ FPDMA QUEUED + 27 00 00 00 00 00 00 00 00 00 00 e0 00 11d+15:27:20.767 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 2 [1] occurred at disk power-on lifetime: 41056 hours (1710 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 45 a0 01 20 00 00 Error: UNC at LBA = 0x45a00120 = 1168113952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 40 00 00 44 00 01 48 40 00 11d+15:27:17.271 READ FPDMA QUEUED + 60 00 00 00 80 00 00 45 a0 01 08 40 00 11d+15:27:17.268 READ FPDMA QUEUED + 60 00 00 00 40 00 00 45 a0 00 88 40 00 11d+15:27:17.260 READ FPDMA QUEUED + 60 00 00 00 80 00 00 45 80 02 88 40 00 11d+15:27:17.246 READ FPDMA QUEUED + 60 00 00 00 40 00 00 45 80 01 88 40 00 11d+15:27:17.246 READ FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 29964 hours (1248 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 9e 3f c2 20 00 00 Error: UNC at LBA = 0x9e3fc220 = 2654978592 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 04 00 00 00 9e 3f d0 00 40 00 05:31:36.543 READ FPDMA QUEUED + 60 00 00 02 e0 00 00 9e 3f cd 20 40 00 05:31:36.543 READ FPDMA QUEUED + 60 00 00 01 20 00 00 9e 3f cc 00 40 00 05:31:36.542 READ FPDMA QUEUED + 60 00 00 04 00 00 00 9e 3f c4 00 40 00 05:31:36.541 READ FPDMA QUEUED + 60 00 00 02 e0 00 00 9e 3f c1 20 40 00 05:31:36.541 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 42351 - +# 2 Extended offline Completed without error 00% 41770 - +# 3 Extended offline Completed without error 00% 41603 - +# 4 Extended offline Completed without error 00% 41286 - +# 5 Extended offline Completed without error 00% 40809 - +# 6 Short offline Completed without error 00% 40777 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 32/40 Celsius +Lifetime Min/Max Temperature: 14/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (119) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000DL003-9VT166/C5E8167AA69F b/HDD/Seagate/ST2000/ST2000DL003-9VT166/C5E8167AA69F new file mode 100644 index 000000000..dafe468f1 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DL003-9VT166/C5E8167AA69F @@ -0,0 +1,175 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda Green (AF) +Device Model: ST2000DL003-9VT166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC32 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5900 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 17:48:30 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 0 (vendor specific), recommended: 254 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 612) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 334) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30b7) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 158544536 + 3 Spin_Up_Time PO---- 092 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 414 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 088 060 030 - 798925179 + 9 Power_On_Hours -O--CK 024 024 000 - 66745 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 414 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 095 000 - 92 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 063 044 045 Past 37 (0 143 37 24 0) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 406 +193 Load_Cycle_Count -O--CK 100 100 000 - 414 +194 Temperature_Celsius -O---K 037 056 000 - 37 (0 10 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 023 003 000 - 158544536 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 66742 (149 46 0) +241 Total_LBAs_Written ------ 100 253 000 - 70718057 +242 Total_LBAs_Read ------ 100 253 000 - 3135658069 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2819 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 37552 - +# 2 Short offline Completed without error 00% 37552 - +# 3 Short offline Completed without error 00% 37454 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 24/37 Celsius +Lifetime Min/Max Temperature: 10/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (96) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST2000/ST2000DL003-9VT166/FB031C3A17EC b/HDD/Seagate/ST2000/ST2000DL003-9VT166/FB031C3A17EC new file mode 100644 index 000000000..2a1449cef --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DL003-9VT166/FB031C3A17EC @@ -0,0 +1,190 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda Green (AF) +Device Model: ST2000DL003-9VT166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC32 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5900 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 11:00:47 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 0 (vendor specific), recommended: 254 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 623) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 346) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30b7) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 103 099 006 - 5647768 + 3 Spin_Up_Time PO---- 088 076 000 - 0 + 4 Start_Stop_Count -O--CK 081 081 020 - 20119 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 141534398 + 9 Power_On_Hours -O--CK 088 011 000 - 10741 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 176 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 8590065667 +189 High_Fly_Writes -O-RCK 090 090 000 - 10 +190 Airflow_Temperature_Cel -O---K 073 052 045 - 27 (Min/Max 24/28) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 114 +193 Load_Cycle_Count -O--CK 090 090 000 - 20124 +194 Temperature_Celsius -O---K 027 048 000 - 27 (0 21 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 007 003 000 - 5647768 +197 Current_Pending_Sector -O--C- 100 100 000 - 80 +198 Offline_Uncorrectable ----C- 100 100 000 - 80 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 53353 (219 220 0) +241 Total_LBAs_Written ------ 100 253 000 - 1893775121 +242 Total_LBAs_Read ------ 100 253 000 - 681920642 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2819 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 7101 - +# 2 Short offline Completed without error 00% 7078 - +# 3 Short offline Completed without error 00% 7046 - +# 4 Short offline Completed without error 00% 7022 - +# 5 Short offline Completed without error 00% 6998 - +# 6 Short offline Completed without error 00% 6974 - +# 7 Extended offline Completed without error 00% 6960 - +# 8 Short offline Aborted by host 90% 6950 - +# 9 Short offline Completed without error 00% 6926 - +#10 Short offline Completed without error 00% 6902 - +#11 Short offline Completed without error 00% 6878 - +#12 Short offline Completed without error 00% 6854 - +#13 Short offline Completed without error 00% 6830 - +#14 Short offline Completed without error 00% 6806 - +#15 Short offline Completed without error 00% 6782 - +#16 Short offline Completed without error 00% 6758 - +#17 Short offline Completed without error 00% 6734 - +#18 Short offline Completed without error 00% 6710 - +#19 Short offline Completed without error 00% 6686 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 24/28 Celsius +Lifetime Min/Max Temperature: 21/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (100) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 36 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST2000/ST2000DL004 HD204UI/F1389E680876 b/HDD/Seagate/ST2000/ST2000DL004 HD204UI/F1389E680876 new file mode 100644 index 000000000..4b35c5a2e --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DL004 HD204UI/F1389E680876 @@ -0,0 +1,193 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Samsung SpinPoint F4 EG (AF) +Device Model: ST2000DL004 HD204UI +Serial Number: -- +LU WWN Device Id: 5 0004cf ... +Firmware Version: 1AQ10001 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sun Jul 26 20:39:37 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (20100) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 335) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 + 2 Throughput_Performance -OS--K 252 252 000 - 0 + 3 Spin_Up_Time PO---K 066 064 025 - 10320 + 4 Start_Stop_Count -O--CK 099 099 000 - 1720 + 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 + 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 + 8 Seek_Time_Performance --S--K 252 252 015 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 4329 + 10 Spin_Retry_Count -O--CK 252 252 051 - 0 + 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1653 +181 Program_Fail_Cnt_Total -O---K 100 100 000 - 1080730 +191 G-Sense_Error_Rate -O---K 100 100 000 - 166 +192 Power-Off_Retract_Count -O---K 252 252 000 - 0 +194 Temperature_Celsius -O---- 064 063 000 - 25 (Min/Max 10/37) +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 252 252 000 - 0 +197 Current_Pending_Sector -O--CK 252 252 000 - 0 +198 Offline_Uncorrectable ----CK 252 252 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 37 +223 Load_Retry_Count -O--CK 252 252 000 - 0 +225 Load_Cycle_Count -O--CK 100 100 000 - 1731 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 2 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3315 - +# 2 Short offline Completed without error 00% 3020 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 18/25 Celsius +Lifetime Min/Max Temperature: 11/63 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 5 minutes +Temperature Logging Interval: 5 minutes +Min/Max recommended Temperature: -5/80 Celsius +Min/Max Temperature Limit: -10/85 Celsius +Temperature History Size (Index): 128 (19) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x8e00 4 0 Vendor specific +0x8e01 4 0 Vendor specific +0x8e02 4 0 Vendor specific +0x8e03 4 0 Vendor specific +0x8e04 4 0 Vendor specific +0x8e05 4 0 Vendor specific +0x8e06 4 0 Vendor specific +0x8e07 4 0 Vendor specific +0x8e08 4 0 Vendor specific +0x8e09 4 0 Vendor specific +0x8e0a 4 0 Vendor specific +0x8e0b 4 0 Vendor specific +0x8e0c 4 0 Vendor specific +0x8e0d 4 0 Vendor specific +0x8e0e 4 0 Vendor specific +0x8e0f 4 0 Vendor specific +0x8e10 4 0 Vendor specific +0x8e11 4 0 Vendor specific + diff --git a/HDD/Seagate/ST2000/ST2000DM001-1CH164/1D2AFDA794FB b/HDD/Seagate/ST2000/ST2000DM001-1CH164/1D2AFDA794FB new file mode 100644 index 000000000..d4245a0ec --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DM001-1CH164/1D2AFDA794FB @@ -0,0 +1,337 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST2000DM001-1CH164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC24 +User Capacity: 2,000,397,852,160 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 16:26:47 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 584) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 225) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 115 091 006 - 98618624 + 3 Spin_Up_Time PO---- 097 095 000 - 0 + 4 Start_Stop_Count -O--CK 098 098 020 - 2369 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 069 060 030 - 77430059447 + 9 Power_On_Hours -O--CK 085 085 000 - 13239 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1788 +183 Runtime_Bad_Block -O--CK 099 099 000 - 1 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 001 001 000 - 2722 +188 Command_Timeout -O--CK 100 097 000 - 8 8 14 +189 High_Fly_Writes -O-RCK 001 001 000 - 179 +190 Airflow_Temperature_Cel -O---K 068 054 045 - 32 (Min/Max 26/32) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 248 +193 Load_Cycle_Count -O--CK 097 097 000 - 6401 +194 Temperature_Celsius -O---K 032 046 000 - 32 (0 16 0 0 0) +197 Current_Pending_Sector -O--C- 100 097 000 - 0 +198 Offline_Uncorrectable ----C- 100 097 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 192 000 - 1760 +240 Head_Flying_Hours ------ 100 253 000 - 11862h+12m+45.574s +241 Total_LBAs_Written ------ 100 253 000 - 99631280960 +242 Total_LBAs_Read ------ 100 253 000 - 74765537603 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbd GPL VS 512 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 2726 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2726 [5] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 80 ca 1e 68 00 00 Error: UNC at LBA = 0x80ca1e68 = 2160729704 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:32.680 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:32.651 READ LOG EXT + 60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:29.793 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:29.759 READ LOG EXT + 60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:26.920 READ FPDMA QUEUED + +Error 2725 [4] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 80 ca 1e 68 00 00 Error: UNC at LBA = 0x80ca1e68 = 2160729704 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:29.793 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:29.759 READ LOG EXT + 60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:26.920 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:26.891 READ LOG EXT + 60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:24.045 READ FPDMA QUEUED + +Error 2724 [3] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 80 ca 1e 68 00 00 Error: UNC at LBA = 0x80ca1e68 = 2160729704 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:26.920 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:26.891 READ LOG EXT + 60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:24.045 READ FPDMA QUEUED + 60 00 00 00 08 00 00 70 ca dc 68 40 00 02:19:24.044 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:23.944 READ LOG EXT + +Error 2723 [2] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 80 ca 1e 68 00 00 Error: UNC at LBA = 0x80ca1e68 = 2160729704 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:24.045 READ FPDMA QUEUED + 60 00 00 00 08 00 00 70 ca dc 68 40 00 02:19:24.044 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 02:19:23.944 READ LOG EXT + 60 00 00 00 08 00 00 a0 c8 c3 e0 40 00 02:19:20.896 READ FPDMA QUEUED + 60 00 00 00 08 00 00 e6 f0 ba 08 40 00 02:19:20.896 READ FPDMA QUEUED + +Error 2722 [1] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 80 ca 1e 68 00 00 Error: UNC at LBA = 0x80ca1e68 = 2160729704 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 a0 c8 c3 e0 40 00 02:19:20.896 READ FPDMA QUEUED + 60 00 00 00 08 00 00 e6 f0 ba 08 40 00 02:19:20.896 READ FPDMA QUEUED + 60 00 00 00 08 00 00 80 ca 1e 68 40 00 02:19:20.896 READ FPDMA QUEUED + 60 00 00 00 08 00 00 70 ca dc 68 40 00 02:19:20.896 READ FPDMA QUEUED + 60 00 00 00 08 00 00 a0 ce 55 88 40 00 02:19:20.896 READ FPDMA QUEUED + +Error 2721 [0] occurred at disk power-on lifetime: 6093 hours (253 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 15 14 87 a8 00 00 Error: UNC at LBA = 0x151487a8 = 353666984 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 15 14 dd a8 40 00 01:50:11.196 READ FPDMA QUEUED + 60 00 00 01 00 00 00 15 14 ed a8 40 00 01:50:11.196 READ FPDMA QUEUED + 60 00 00 01 00 00 00 15 14 8a a8 40 00 01:50:11.196 READ FPDMA QUEUED + 60 00 00 01 00 00 00 15 14 89 a8 40 00 01:50:11.196 READ FPDMA QUEUED + 60 00 00 01 00 00 00 15 14 88 a8 40 00 01:50:11.195 READ FPDMA QUEUED + +Error 2720 [19] occurred at disk power-on lifetime: 6093 hours (253 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 15 14 87 a8 00 00 Error: WP at LBA = 0x151487a8 = 353666984 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 40 00 00 2a 98 34 68 40 00 01:50:08.300 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 2b 22 17 28 40 00 01:50:08.299 WRITE FPDMA QUEUED + 61 00 00 00 18 00 00 29 13 f1 10 40 00 01:50:08.298 WRITE FPDMA QUEUED + 60 00 00 01 00 00 00 15 14 dd a8 40 00 01:50:08.298 READ FPDMA QUEUED + 60 00 00 01 00 00 00 15 14 ed a8 40 00 01:50:08.298 READ FPDMA QUEUED + +Error 2719 [18] occurred at disk power-on lifetime: 6093 hours (253 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 15 14 87 a8 00 00 Error: WP at LBA = 0x151487a8 = 353666984 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 18 00 00 29 13 f1 10 40 00 01:50:05.828 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 2a 98 34 68 40 00 01:50:05.391 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 2b 22 17 28 40 00 01:50:05.390 WRITE FPDMA QUEUED + 60 00 00 01 00 00 00 15 14 dd a8 40 00 01:50:05.390 READ FPDMA QUEUED + 60 00 00 01 00 00 00 15 14 ed a8 40 00 01:50:05.390 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9047 - +# 2 Extended offline Completed without error 00% 8982 - +# 3 Extended offline Aborted by host 90% 8934 - +# 4 Short offline Completed without error 00% 8934 - +# 5 Short offline Completed without error 00% 7167 - +# 6 Short offline Completed without error 00% 7150 - +# 7 Short offline Completed without error 00% 7136 - +# 8 Short offline Completed without error 00% 7123 - +# 9 Short offline Completed without error 00% 7110 - +#10 Short offline Completed without error 00% 7096 - +#11 Extended offline Interrupted (host reset) 90% 7080 - +#12 Short offline Completed without error 00% 7069 - +#13 Short offline Completed without error 00% 7052 - +#14 Short offline Completed without error 00% 7034 - +#15 Short offline Completed without error 00% 7019 - +#16 Short offline Completed without error 00% 6594 - +#17 Short offline Completed without error 00% 6574 - +#18 Short offline Completed without error 00% 6479 - +#19 Short offline Completed without error 00% 6461 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 26/29 Celsius +Lifetime Min/Max Temperature: 16/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000DM001-1CH164/CF592321257D b/HDD/Seagate/ST2000/ST2000DM001-1CH164/CF592321257D new file mode 100644 index 000000000..66e3a9129 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DM001-1CH164/CF592321257D @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST2000DM001-1CH164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC29 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 23 14:36:31 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 592) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 224) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 112 099 006 - 50165968 + 3 Spin_Up_Time PO---- 096 094 000 - 0 + 4 Start_Stop_Count -O--CK 092 092 020 - 9096 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 082 060 030 - 174934260 + 9 Power_On_Hours -O--CK 074 074 000 - 23543 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 092 092 020 - 8205 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 098 000 - 14 14 22 +189 High_Fly_Writes -O-RCK 099 099 000 - 1 +190 Airflow_Temperature_Cel -O---K 058 050 045 - 42 (Min/Max 31/43 #1) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 3330 +193 Load_Cycle_Count -O--CK 001 001 000 - 311052 +194 Temperature_Celsius -O---K 042 050 000 - 42 (128 0 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 8 +240 Head_Flying_Hours ------ 100 253 000 - 14827h+13m+02.406s +241 Total_LBAs_Written ------ 100 253 000 - 31114304111 +242 Total_LBAs_Read ------ 100 253 000 - 34557054404 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5307 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 32/43 Celsius +Lifetime Min/Max Temperature: 9/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000DM001-1CH164/E62EC8287ECC b/HDD/Seagate/ST2000/ST2000DM001-1CH164/E62EC8287ECC new file mode 100644 index 000000000..6dfd34ca3 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DM001-1CH164/E62EC8287ECC @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST2000DM001-1CH164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC29 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 7 20:23:45 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 267) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 73879592 + 3 Spin_Up_Time PO---- 095 093 000 - 0 + 4 Start_Stop_Count -O--CK 091 091 020 - 9477 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 066 055 030 - 795243157278 + 9 Power_On_Hours -O--CK 074 074 000 - 22957 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 096 096 020 - 4356 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 20 20 24 +189 High_Fly_Writes -O-RCK 096 096 000 - 4 +190 Airflow_Temperature_Cel -O---K 058 047 045 - 42 (Min/Max 26/42 #5) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1197 +193 Load_Cycle_Count -O--CK 046 046 000 - 108252 +194 Temperature_Celsius -O---K 042 053 000 - 42 (128 0 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 +240 Head_Flying_Hours ------ 100 253 000 - 16067h+07m+19.776s +241 Total_LBAs_Written ------ 100 253 000 - 78575544550 +242 Total_LBAs_Read ------ 100 253 000 - 205484336186 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 21547 - +# 2 Short offline Completed without error 00% 21479 - +# 3 Short offline Completed without error 00% 19106 - +# 4 Short offline Completed without error 00% 19101 - +# 5 Short offline Completed without error 00% 18055 - +# 6 Short offline Completed without error 00% 17509 - +# 7 Short offline Completed without error 00% 2751 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 26/34 Celsius +Lifetime Min/Max Temperature: 16/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000DM001-1ER164/D43A104CE38F b/HDD/Seagate/ST2000/ST2000DM001-1ER164/D43A104CE38F new file mode 100644 index 000000000..ddf1ed430 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DM001-1ER164/D43A104CE38F @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST2000DM001-1ER164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC25 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 17:48:29 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 89) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 221) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 197008208 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 88 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 085 060 030 - 362974446 + 9 Power_On_Hours -O--CK 055 055 000 - 39546 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 87 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 092 092 000 - 8 +190 Airflow_Temperature_Cel -O---K 064 054 045 - 36 (Min/Max 23/37) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 0 +193 Load_Cycle_Count -O--CK 075 075 000 - 50597 +194 Temperature_Celsius -O---K 036 046 000 - 36 (0 9 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 33272h+34m+16.062s +241 Total_LBAs_Written ------ 100 253 000 - 81936624558 +242 Total_LBAs_Read ------ 100 253 000 - 5651907526092 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 142 - +# 2 Short offline Completed without error 00% 43 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 23/37 Celsius +Lifetime Min/Max Temperature: 8/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000DM001-9YN164/25CE17AB0CD1 b/HDD/Seagate/ST2000/ST2000DM001-9YN164/25CE17AB0CD1 new file mode 100644 index 000000000..dfc6a4332 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DM001-9YN164/25CE17AB0CD1 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST2000DM001-9YN164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC4B +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Oct 10 15:00:53 2020 JST + +==> WARNING: A firmware update for this drive may be available, +see the following Seagate web pages: +http://knowledge.seagate.com/articles/en_US/FAQ/207931en +http://knowledge.seagate.com/articles/en_US/FAQ/223651en + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 225) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 100 006 - 121415496 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 9 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 760 + 7 Seek_Error_Rate POSR-- 065 060 030 - 3432628 + 9 Power_On_Hours -O--CK 094 094 000 - 5620 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 9 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 062 058 045 - 38 (Min/Max 38/38) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 7 +193 Load_Cycle_Count -O--CK 100 100 000 - 33 +194 Temperature_Celsius -O---K 038 042 000 - 38 (0 28 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 1419h+44m+34.103s +241 Total_LBAs_Written ------ 100 253 000 - 371556099364 +242 Total_LBAs_Read ------ 100 253 000 - 171749227351420 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5067 Device vendor specific log +0xbd GPL VS 512 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 38/38 Celsius +Lifetime Min/Max Temperature: 28/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST2000/ST2000DM006-2DM164/5D278FA8E4FB b/HDD/Seagate/ST2000/ST2000DM006-2DM164/5D278FA8E4FB new file mode 100644 index 000000000..79709b0b9 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DM006-2DM164/5D278FA8E4FB @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST2000DM006-2DM164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC26 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 7 20:23:45 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 221) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 112 099 006 - 43044536 + 3 Spin_Up_Time PO---- 094 094 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 833 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 079 060 030 - 84928418 + 9 Power_On_Hours -O--CK 096 096 000 - 3946 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 650 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 068 068 000 - 32 +190 Airflow_Temperature_Cel -O---K 058 047 045 - 42 (Min/Max 25/42) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 272 +193 Load_Cycle_Count -O--CK 085 085 000 - 31126 +194 Temperature_Celsius -O---K 042 053 000 - 42 (0 19 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 2644h+43m+32.876s +241 Total_LBAs_Written ------ 100 253 000 - 105913664769 +242 Total_LBAs_Read ------ 100 253 000 - 11847891371821 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2513 - +# 2 Short offline Completed without error 00% 2445 - +# 3 Short offline Completed without error 00% 65 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 25/43 Celsius +Lifetime Min/Max Temperature: 19/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000DM008-2FR102/040AF54A2F3C b/HDD/Seagate/ST2000/ST2000DM008-2FR102/040AF54A2F3C new file mode 100644 index 000000000..89590324b --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DM008-2FR102/040AF54A2F3C @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ST2000DM008-2FR102 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 7 20:23:43 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 199) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 083 059 006 - 180813785 + 3 Spin_Up_Time PO---- 098 098 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 314 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 080 060 045 - 99907048 + 9 Power_On_Hours -O--CK 099 099 000 - 1569 (204 49 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 314 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 17180131332 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 049 040 - 41 (Min/Max 29/41) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 272 +193 Load_Cycle_Count -O--CK 097 097 000 - 7772 +194 Temperature_Celsius -O---K 041 051 000 - 41 (0 25 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 083 064 000 - 180813785 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 1051 (150 143 0) +241 Total_LBAs_Written ------ 100 253 000 - 8427073178 +242 Total_LBAs_Read ------ 100 253 000 - 7052853019 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 71 - +# 2 Short offline Completed without error 00% 3 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 29/42 Celsius +Lifetime Min/Max Temperature: 25/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (94) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 314 --- Lifetime Power-On Resets +0x01 0x010 4 1569 --- Power-on Hours +0x01 0x018 6 8471206781 --- Logical Sectors Written +0x01 0x020 6 105584250 --- Number of Write Commands +0x01 0x028 6 7125673462 --- Logical Sectors Read +0x01 0x030 6 134620485 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1515 --- Spindle Motor Power-on Hours +0x03 0x010 4 1042 --- Head Flying Hours +0x03 0x018 4 7773 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 1 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 272 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 10 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 41 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 40 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 520 --- Number of Hardware Resets +0x06 0x010 4 74 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000DM008-2FR102/E0E6F8BCA1F3 b/HDD/Seagate/ST2000/ST2000DM008-2FR102/E0E6F8BCA1F3 new file mode 100644 index 000000000..fd410b8de --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000DM008-2FR102/E0E6F8BCA1F3 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ST2000DM008-2FR102 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 24 23:50:53 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 204) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 083 064 006 - 187796260 + 3 Spin_Up_Time PO---- 098 097 000 - 0 + 4 Start_Stop_Count -O--CK 098 098 020 - 2977 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 080 060 045 - 106539101 + 9 Power_On_Hours -O--CK 097 097 000 - 3097 (198 117 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 098 098 020 - 2977 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 65538 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 065 061 040 - 35 (Min/Max 29/35) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 596 +193 Load_Cycle_Count -O--CK 084 084 000 - 33908 +194 Temperature_Celsius -O---K 035 040 000 - 35 (0 16 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 083 064 000 - 187796260 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 2320 (229 44 0) +241 Total_LBAs_Written ------ 100 253 000 - 6134438291 +242 Total_LBAs_Read ------ 100 253 000 - 8399896428 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 29/35 Celsius +Lifetime Min/Max Temperature: 16/39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (39) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2977 --- Lifetime Power-On Resets +0x01 0x010 4 3097 --- Power-on Hours +0x01 0x018 6 6231528653 --- Logical Sectors Written +0x01 0x020 6 124688551 --- Number of Write Commands +0x01 0x028 6 8421231981 --- Logical Sectors Read +0x01 0x030 6 144945128 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2793 --- Spindle Motor Power-on Hours +0x03 0x010 4 2137 --- Head Flying Hours +0x03 0x018 4 33908 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 80 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 595 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 1 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 1330 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 13363 --- Number of Hardware Resets +0x06 0x010 4 7046 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000LM015-2E8174/16D7CFE84F49 b/HDD/Seagate/ST2000/ST2000LM015-2E8174/16D7CFE84F49 new file mode 100644 index 000000000..f2a604992 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000LM015-2E8174/16D7CFE84F49 @@ -0,0 +1,207 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST2000LM015-2E8174 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:51:41 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 333) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 080 064 006 - 98811600 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 26 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 076 060 045 - 42353925 + 9 Power_On_Hours -O--CK 083 083 000 - 15571 (170 55 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 26 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 071 061 040 - 29 (Min/Max 24/39) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 13 +193 Load_Cycle_Count -O--CK 097 097 000 - 6578 +194 Temperature_Celsius -O---K 029 040 000 - 29 (0 17 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 15545 (243 133 0) +241 Total_LBAs_Written ------ 100 253 000 - 3414644661 +242 Total_LBAs_Read ------ 100 253 000 - 32363001038 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 7454 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 24/39 Celsius +Lifetime Min/Max Temperature: 17/49 Celsius +Specified Max Operating Temperature: 27 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (72) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 15571 --- Power-on Hours +0x01 0x018 6 3414646813 --- Logical Sectors Written +0x01 0x020 6 29212193 --- Number of Write Commands +0x01 0x028 6 32363001038 --- Logical Sectors Read +0x01 0x030 6 136949933 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 15570 --- Spindle Motor Power-on Hours +0x03 0x010 4 0 --- Head Flying Hours +0x03 0x018 4 6578 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000LM015-2E8174/1ADC5D7D1543 b/HDD/Seagate/ST2000/ST2000LM015-2E8174/1ADC5D7D1543 new file mode 100644 index 000000000..070c54abd --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000LM015-2E8174/1ADC5D7D1543 @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST2000LM015-2E8174 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 22 10:50:42 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 327) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 084 064 006 - 229344501 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 469 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 071 060 045 - 11455785 + 9 Power_On_Hours -O--CK 100 100 000 - 659 (152 184 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 291 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 070 052 040 - 30 (Min/Max 21/32) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 1 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 53 +193 Load_Cycle_Count -O--CK 090 090 000 - 21411 +194 Temperature_Celsius -O---K 030 048 000 - 30 (0 15 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 336 (154 139 0) +241 Total_LBAs_Written ------ 100 253 000 - 1198977885 +242 Total_LBAs_Read ------ 100 253 000 - 251070928 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 21/32 Celsius +Lifetime Min/Max Temperature: 15/50 Celsius +Specified Max Operating Temperature: 32 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (19) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 291 --- Lifetime Power-On Resets +0x01 0x010 4 659 --- Power-on Hours +0x01 0x018 6 1198979621 --- Logical Sectors Written +0x01 0x020 6 13820530 --- Number of Write Commands +0x01 0x028 6 251104437 --- Logical Sectors Read +0x01 0x030 6 1992328 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 543 --- Spindle Motor Power-on Hours +0x03 0x010 4 46 --- Head Flying Hours +0x03 0x018 4 21411 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST2000/ST2000LM015-2E8174/1BB1C5E35ED2 b/HDD/Seagate/ST2000/ST2000LM015-2E8174/1BB1C5E35ED2 new file mode 100644 index 000000000..03fa46998 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000LM015-2E8174/1BB1C5E35ED2 @@ -0,0 +1,207 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST2000LM015-2E8174 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:51:44 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 331) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 082 064 006 - 173666528 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 44 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 086 060 045 - 358100580 + 9 Power_On_Hours -O--CK 077 077 000 - 20644 (126 84 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 44 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 074 064 040 - 26 (Min/Max 21/35) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 5 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 29 +193 Load_Cycle_Count -O--CK 100 100 000 - 239 +194 Temperature_Celsius -O---K 026 040 000 - 26 (0 19 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 20641 (237 60 0) +241 Total_LBAs_Written ------ 100 253 000 - 33837597826 +242 Total_LBAs_Read ------ 100 253 000 - 90899151437 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 12533 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 21/35 Celsius +Lifetime Min/Max Temperature: 19/51 Celsius +Specified Max Operating Temperature: 27 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (117) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 44 --- Lifetime Power-On Resets +0x01 0x010 4 20644 --- Power-on Hours +0x01 0x018 6 33838260378 --- Logical Sectors Written +0x01 0x020 6 944492790 --- Number of Write Commands +0x01 0x028 6 90899200021 --- Logical Sectors Read +0x01 0x030 6 485760249 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 20643 --- Spindle Motor Power-on Hours +0x03 0x010 4 0 --- Head Flying Hours +0x03 0x018 4 239 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000LM015-2E8174/2ADB922733CC b/HDD/Seagate/ST2000/ST2000LM015-2E8174/2ADB922733CC new file mode 100644 index 000000000..b3b39eb2f --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000LM015-2E8174/2ADB922733CC @@ -0,0 +1,207 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST2000LM015-2E8174 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:51:45 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 325) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 082 064 006 - 167686096 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 44 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 082 060 045 - 154655676 + 9 Power_On_Hours -O--CK 077 077 000 - 20645 (186 238 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 44 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 075 061 040 - 25 (Min/Max 20/33) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 9 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 29 +193 Load_Cycle_Count -O--CK 100 100 000 - 224 +194 Temperature_Celsius -O---K 025 040 000 - 25 (0 18 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 20640 (47 121 0) +241 Total_LBAs_Written ------ 100 253 000 - 32725397018 +242 Total_LBAs_Read ------ 100 253 000 - 89798238317 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 12533 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 20/33 Celsius +Lifetime Min/Max Temperature: 18/48 Celsius +Specified Max Operating Temperature: 26 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (116) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 44 --- Lifetime Power-On Resets +0x01 0x010 4 20645 --- Power-on Hours +0x01 0x018 6 32726204218 --- Logical Sectors Written +0x01 0x020 6 894091867 --- Number of Write Commands +0x01 0x028 6 89798519701 --- Logical Sectors Read +0x01 0x030 6 488687357 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 20643 --- Spindle Motor Power-on Hours +0x03 0x010 4 0 --- Head Flying Hours +0x03 0x018 4 224 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 2 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000LM015-2E8174/2EEC0C6358C5 b/HDD/Seagate/ST2000/ST2000LM015-2E8174/2EEC0C6358C5 new file mode 100644 index 000000000..4d56c15c7 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000LM015-2E8174/2EEC0C6358C5 @@ -0,0 +1,207 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST2000LM015-2E8174 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:51:41 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 319) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 082 064 006 - 162196232 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 26 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 076 060 045 - 43984618 + 9 Power_On_Hours -O--CK 083 083 000 - 15571 (28 82 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 26 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 4295032834 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 070 060 040 - 30 (Min/Max 25/40) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 13 +193 Load_Cycle_Count -O--CK 097 097 000 - 6584 +194 Temperature_Celsius -O---K 030 040 000 - 30 (0 18 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 15545 (154 57 0) +241 Total_LBAs_Written ------ 100 253 000 - 3394546317 +242 Total_LBAs_Read ------ 100 253 000 - 32191076579 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 7454 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 25/40 Celsius +Lifetime Min/Max Temperature: 18/40 Celsius +Specified Max Operating Temperature: 28 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (72) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 15571 --- Power-on Hours +0x01 0x018 6 3394548309 --- Logical Sectors Written +0x01 0x020 6 26548941 --- Number of Write Commands +0x01 0x028 6 32191076587 --- Logical Sectors Read +0x01 0x030 6 145035120 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 15570 --- Spindle Motor Power-on Hours +0x03 0x010 4 0 --- Head Flying Hours +0x03 0x018 4 6584 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000LM015-2E8174/85A40EA919ED b/HDD/Seagate/ST2000/ST2000LM015-2E8174/85A40EA919ED new file mode 100644 index 000000000..c3c2aedee --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000LM015-2E8174/85A40EA919ED @@ -0,0 +1,207 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST2000LM015-2E8174 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:51:47 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 330) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 076 060 006 - 39315472 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 44 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 078 060 045 - 62901082 + 9 Power_On_Hours -O--CK 077 077 000 - 20644 (200 204 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 44 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 075 062 040 - 25 (Min/Max 20/33) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 5 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 29 +193 Load_Cycle_Count -O--CK 100 100 000 - 229 +194 Temperature_Celsius -O---K 025 040 000 - 25 (0 18 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 20640 (78 7 0) +241 Total_LBAs_Written ------ 100 253 000 - 33846958514 +242 Total_LBAs_Read ------ 100 253 000 - 90752997223 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 12533 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 20/33 Celsius +Lifetime Min/Max Temperature: 18/48 Celsius +Specified Max Operating Temperature: 26 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (118) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 44 --- Lifetime Power-On Resets +0x01 0x010 4 20644 --- Power-on Hours +0x01 0x018 6 33847667474 --- Logical Sectors Written +0x01 0x020 6 946877571 --- Number of Write Commands +0x01 0x028 6 90753034136 --- Logical Sectors Read +0x01 0x030 6 486269168 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 20643 --- Spindle Motor Power-on Hours +0x03 0x010 4 0 --- Head Flying Hours +0x03 0x018 4 229 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 17 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000LM015-2E8174/CC356311D33B b/HDD/Seagate/ST2000/ST2000LM015-2E8174/CC356311D33B new file mode 100644 index 000000000..88cf6ea6d --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000LM015-2E8174/CC356311D33B @@ -0,0 +1,207 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST2000LM015-2E8174 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:51:40 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 326) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 079 064 006 - 85450528 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 27 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 076 060 045 - 42449098 + 9 Power_On_Hours -O--CK 083 083 000 - 15571 (114 72 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 27 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 072 061 040 - 28 (Min/Max 23/37) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 1 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 13 +193 Load_Cycle_Count -O--CK 097 097 000 - 6590 +194 Temperature_Celsius -O---K 028 040 000 - 28 (0 16 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 15545 (93 170 0) +241 Total_LBAs_Written ------ 100 253 000 - 3414635429 +242 Total_LBAs_Read ------ 100 253 000 - 32343243103 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 7454 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 23/37 Celsius +Lifetime Min/Max Temperature: 16/48 Celsius +Specified Max Operating Temperature: 27 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (74) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 15571 --- Power-on Hours +0x01 0x018 6 3414635429 --- Logical Sectors Written +0x01 0x020 6 29143276 --- Number of Write Commands +0x01 0x028 6 32343243103 --- Logical Sectors Read +0x01 0x030 6 142281370 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 15570 --- Spindle Motor Power-on Hours +0x03 0x010 4 0 --- Head Flying Hours +0x03 0x018 4 6590 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 6 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000LM015-2E8174/E5F5400EB767 b/HDD/Seagate/ST2000/ST2000LM015-2E8174/E5F5400EB767 new file mode 100644 index 000000000..a1a30b9f0 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000LM015-2E8174/E5F5400EB767 @@ -0,0 +1,207 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST2000LM015-2E8174 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:51:42 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 324) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 064 006 - 1877200 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 44 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 084 060 045 - 4571800663 + 9 Power_On_Hours -O--CK 077 077 000 - 20645 (68 17 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 44 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 074 064 040 - 26 (Min/Max 20/35) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 4 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 31 +193 Load_Cycle_Count -O--CK 100 100 000 - 222 +194 Temperature_Celsius -O---K 026 040 000 - 26 (0 18 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 20641 (163 27 0) +241 Total_LBAs_Written ------ 100 253 000 - 32703881938 +242 Total_LBAs_Read ------ 100 253 000 - 89899303361 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 12533 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 20/35 Celsius +Lifetime Min/Max Temperature: 18/46 Celsius +Specified Max Operating Temperature: 27 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (118) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 44 --- Lifetime Power-On Resets +0x01 0x010 4 20645 --- Power-on Hours +0x01 0x018 6 32704250722 --- Logical Sectors Written +0x01 0x020 6 892115385 --- Number of Write Commands +0x01 0x028 6 89899460737 --- Logical Sectors Read +0x01 0x030 6 492861767 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 20644 --- Spindle Motor Power-on Hours +0x03 0x010 4 0 --- Head Flying Hours +0x03 0x018 4 222 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000LM015-2E8174/FC9B6C0AE4DA b/HDD/Seagate/ST2000/ST2000LM015-2E8174/FC9B6C0AE4DA new file mode 100644 index 000000000..f4e12494b --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000LM015-2E8174/FC9B6C0AE4DA @@ -0,0 +1,207 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST2000LM015-2E8174 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SDM1 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:51:42 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 326) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 083 064 006 - 208708400 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 26 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 076 060 045 - 43774703 + 9 Power_On_Hours -O--CK 083 083 000 - 15571 (190 233 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 26 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 4295032833 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 072 062 040 - 28 (Min/Max 25/38) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 13 +193 Load_Cycle_Count -O--CK 097 097 000 - 6579 +194 Temperature_Celsius -O---K 028 040 000 - 28 (0 17 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 15545 (106 51 0) +241 Total_LBAs_Written ------ 100 253 000 - 3396921636 +242 Total_LBAs_Read ------ 100 253 000 - 32238483982 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8 GPL,SL VS 136 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 8920 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc2 GPL,SL VS 240 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xc9 GPL,SL VS 1 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 7454 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 25/38 Celsius +Lifetime Min/Max Temperature: 17/38 Celsius +Specified Max Operating Temperature: 27 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (72) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 15571 --- Power-on Hours +0x01 0x018 6 3396923732 --- Logical Sectors Written +0x01 0x020 6 27173025 --- Number of Write Commands +0x01 0x028 6 32238483990 --- Logical Sectors Read +0x01 0x030 6 142825189 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 15570 --- Spindle Motor Power-on Hours +0x03 0x010 4 0 --- Head Flying Hours +0x03 0x018 4 6579 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000NC001-1DY164/007E536EE0FB b/HDD/Seagate/ST2000/ST2000NC001-1DY164/007E536EE0FB new file mode 100644 index 000000000..61dc00c89 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000NC001-1DY164/007E536EE0FB @@ -0,0 +1,192 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Constellation CS +Device Model: ST2000NC001-1DY164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CN02 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 09:54:58 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 225) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 074 063 044 - 28778456 + 3 Spin_Up_Time PO---- 095 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 201 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 112 + 7 Seek_Error_Rate POSR-- 078 060 030 - 13119635973 + 9 Power_On_Hours -O--CK 051 051 000 - 43151 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 201 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 095 095 000 - 5 +190 Airflow_Temperature_Cel -O---K 061 055 045 - 39 (Min/Max 28/42) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 36 +193 Load_Cycle_Count -O--CK 100 100 000 - 201 +194 Temperature_Celsius -O---K 039 045 000 - 39 (0 19 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 33151 - +# 2 Short offline Completed without error 00% 33149 - +# 3 Short offline Completed without error 00% 33147 - +# 4 Short offline Completed without error 00% 33145 - +# 5 Short offline Completed without error 00% 33143 - +# 6 Short offline Completed without error 00% 33141 - +# 7 Short offline Completed without error 00% 33139 - +# 8 Short offline Completed without error 00% 33137 - +# 9 Short offline Completed without error 00% 33135 - +#10 Short offline Completed without error 00% 33133 - +#11 Short offline Completed without error 00% 33131 - +#12 Short offline Completed without error 00% 33129 - +#13 Short offline Completed without error 00% 33127 - +#14 Short offline Completed without error 00% 33125 - +#15 Short offline Completed without error 00% 33123 - +#16 Short offline Completed without error 00% 33121 - +#17 Short offline Completed without error 00% 33119 - +#18 Short offline Completed without error 00% 33117 - +#19 Short offline Completed without error 00% 33115 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 28/42 Celsius +Lifetime Min/Max Temperature: 19/45 Celsius +Under/Over Temperature Limit Count: 0/8286 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (6) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000NC001-1DY164/2DD1FB6266B1 b/HDD/Seagate/ST2000/ST2000NC001-1DY164/2DD1FB6266B1 new file mode 100644 index 000000000..c827832ef --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000NC001-1DY164/2DD1FB6266B1 @@ -0,0 +1,192 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Constellation CS +Device Model: ST2000NC001-1DY164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CN02 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 09:55:01 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 584) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 224) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 082 063 044 - 200058632 + 3 Spin_Up_Time PO---- 095 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 204 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 084 060 030 - 234975814 + 9 Power_On_Hours -O--CK 051 051 000 - 43151 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 204 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 097 097 000 - 3 +190 Airflow_Temperature_Cel -O---K 057 052 045 - 43 (Min/Max 27/47) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 40 +193 Load_Cycle_Count -O--CK 100 100 000 - 204 +194 Temperature_Celsius -O---K 043 048 000 - 43 (0 18 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 33151 - +# 2 Short offline Completed without error 00% 33149 - +# 3 Short offline Completed without error 00% 33147 - +# 4 Short offline Completed without error 00% 33145 - +# 5 Short offline Completed without error 00% 33143 - +# 6 Short offline Completed without error 00% 33141 - +# 7 Short offline Completed without error 00% 33139 - +# 8 Short offline Completed without error 00% 33137 - +# 9 Short offline Completed without error 00% 33135 - +#10 Short offline Completed without error 00% 33133 - +#11 Short offline Completed without error 00% 33131 - +#12 Short offline Completed without error 00% 33129 - +#13 Short offline Completed without error 00% 33127 - +#14 Short offline Completed without error 00% 33125 - +#15 Short offline Completed without error 00% 33123 - +#16 Short offline Completed without error 00% 33121 - +#17 Short offline Completed without error 00% 33119 - +#18 Short offline Completed without error 00% 33117 - +#19 Short offline Completed without error 00% 33115 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 27/47 Celsius +Lifetime Min/Max Temperature: 18/48 Celsius +Under/Over Temperature Limit Count: 0/8309 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (21) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000NC001-1DY164/CB93B129E872 b/HDD/Seagate/ST2000/ST2000NC001-1DY164/CB93B129E872 new file mode 100644 index 000000000..8c7eda4d8 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000NC001-1DY164/CB93B129E872 @@ -0,0 +1,192 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Constellation CS +Device Model: ST2000NC001-1DY164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CN02 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 09:54:58 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 216) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 063 044 - 163192544 + 3 Spin_Up_Time PO---- 095 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 201 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 083 060 030 - 233975000 + 9 Power_On_Hours -O--CK 051 051 000 - 43147 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 201 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 056 045 - 39 (Min/Max 28/43) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 37 +193 Load_Cycle_Count -O--CK 100 100 000 - 201 +194 Temperature_Celsius -O---K 039 044 000 - 39 (0 19 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 33148 - +# 2 Short offline Completed without error 00% 33146 - +# 3 Short offline Completed without error 00% 33144 - +# 4 Short offline Completed without error 00% 33142 - +# 5 Short offline Completed without error 00% 33140 - +# 6 Short offline Completed without error 00% 33138 - +# 7 Short offline Completed without error 00% 33136 - +# 8 Short offline Completed without error 00% 33134 - +# 9 Short offline Completed without error 00% 33132 - +#10 Short offline Completed without error 00% 33130 - +#11 Short offline Completed without error 00% 33128 - +#12 Short offline Completed without error 00% 33126 - +#13 Short offline Completed without error 00% 33124 - +#14 Short offline Completed without error 00% 33122 - +#15 Short offline Completed without error 00% 33120 - +#16 Short offline Completed without error 00% 33118 - +#17 Short offline Completed without error 00% 33116 - +#18 Short offline Completed without error 00% 33114 - +#19 Short offline Completed without error 00% 33112 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 28/43 Celsius +Lifetime Min/Max Temperature: 19/50 Celsius +Under/Over Temperature Limit Count: 0/8294 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (80) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000NC001-1DY164/F261E8116C7A b/HDD/Seagate/ST2000/ST2000NC001-1DY164/F261E8116C7A new file mode 100644 index 000000000..4ac1308a7 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000NC001-1DY164/F261E8116C7A @@ -0,0 +1,190 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Constellation CS +Device Model: ST2000NC001-1DY164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CN02 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 09:55:01 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 584) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 225) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 073 063 044 - 21260672 + 3 Spin_Up_Time PO---- 095 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 202 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 084 060 030 - 4530188422 + 9 Power_On_Hours -O--CK 051 051 000 - 43151 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 202 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 098 098 000 - 2 +190 Airflow_Temperature_Cel -O---K 058 054 045 - 42 (Min/Max 28/46) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 37 +193 Load_Cycle_Count -O--CK 100 100 000 - 202 +194 Temperature_Celsius -O---K 042 046 000 - 42 (0 18 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 33151 - +# 2 Short offline Completed without error 00% 33149 - +# 3 Short offline Completed without error 00% 33147 - +# 4 Short offline Completed without error 00% 33145 - +# 5 Short offline Completed without error 00% 33143 - +# 6 Short offline Completed without error 00% 33141 - +# 7 Short offline Completed without error 00% 33139 - +# 8 Short offline Completed without error 00% 33137 - +# 9 Short offline Completed without error 00% 33135 - +#10 Short offline Completed without error 00% 33133 - +#11 Short offline Completed without error 00% 33131 - +#12 Short offline Completed without error 00% 33129 - +#13 Short offline Completed without error 00% 33127 - +#14 Short offline Completed without error 00% 33125 - +#15 Short offline Completed without error 00% 33123 - +#16 Short offline Completed without error 00% 33121 - +#17 Short offline Completed without error 00% 33119 - +#18 Short offline Completed without error 00% 33117 - +#19 Short offline Completed without error 00% 33115 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 28/46 Celsius +Lifetime Min/Max Temperature: 18/46 Celsius +Under/Over Temperature Limit Count: 0/8307 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (105) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST2000/ST2000NE0025-2FL101/8020CA8E0222 b/HDD/Seagate/ST2000/ST2000NE0025-2FL101/8020CA8E0222 new file mode 100644 index 000000000..cf1d28691 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000NE0025-2FL101/8020CA8E0222 @@ -0,0 +1,104 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf Pro +Device Model: ST2000NE0025-2FL101 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: EN02 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Aug 16 00:18:26 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 225) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 076 063 044 Pre-fail Always - 45711722 + 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2333 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 085 060 045 Pre-fail Always - 372844896 + 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10465 (34 88 0) + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2297 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 099 000 Old_age Always - 38656147478 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 064 051 040 Old_age Always - 36 (Min/Max 24/36) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 79 +193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2572 +194 Temperature_Celsius 0x0022 036 049 000 Old_age Always - 36 (0 15 0 0 0) +195 Hardware_ECC_Recovered 0x001a 076 063 000 Old_age Always - 45711722 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1 +240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 10304 (163 36 0) +241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 36098578289 +242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 43383226844 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST2000/ST2000NE0025-2FL101/A62F4A797A9D b/HDD/Seagate/ST2000/ST2000NE0025-2FL101/A62F4A797A9D new file mode 100644 index 000000000..8e2ea3266 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000NE0025-2FL101/A62F4A797A9D @@ -0,0 +1,227 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf Pro +Device Model: ST2000NE0025-2FL101 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: EN02 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 30 11:42:21 2020 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 216) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 063 044 - 137399667 + 3 Spin_Up_Time PO---- 097 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 167 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 078 060 045 - 58742041 + 9 Power_On_Hours -O--CK 094 094 000 - 5773 (228 30 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 167 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 068 059 040 - 32 (Min/Max 31/33) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 310 +193 Load_Cycle_Count -O--CK 100 100 000 - 1859 +194 Temperature_Celsius -O---K 032 041 000 - 32 (0 25 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 081 063 000 - 137399667 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 5124h+20m+40.217s +241 Total_LBAs_Written ------ 100 253 000 - 8122721819 +242 Total_LBAs_Read ------ 100 253 000 - 314475530 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4120 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 41 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 31/33 Celsius +Lifetime Min/Max Temperature: 25/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 10/40 Celsius +Min/Max Temperature Limit: 5/60 Celsius +Temperature History Size (Index): 128 (42) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 167 --- Lifetime Power-On Resets +0x01 0x010 4 5773 --- Power-on Hours +0x01 0x018 6 8126141856 --- Logical Sectors Written +0x01 0x020 6 268993013 --- Number of Write Commands +0x01 0x028 6 314544915 --- Logical Sectors Read +0x01 0x030 6 3374993 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5774 --- Spindle Motor Power-on Hours +0x03 0x010 4 5166 --- Head Flying Hours +0x03 0x018 4 1859 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 310 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 26 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 30 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 68 --- Number of Hardware Resets +0x06 0x010 4 10 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000NM0011/4CD398E57D61 b/HDD/Seagate/ST2000/ST2000NM0011/4CD398E57D61 new file mode 100644 index 000000000..a31336a93 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000NM0011/4CD398E57D61 @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.0-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Constellation ES (SATA 6Gb/s) +Device Model: ST2000NM0011 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SN03 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7202 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Nov 22 18:48:28 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 291) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 073 063 044 - 22569692 + 3 Spin_Up_Time PO---- 093 091 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 104 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 2 + 7 Seek_Error_Rate POSR-- 095 060 030 - 7843554504 + 9 Power_On_Hours -O--CK 044 044 000 - 49920 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 101 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 066 044 045 Past 34 (0 10 34 34 0) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 65 +193 Load_Cycle_Count -O--CK 100 100 000 - 177 +194 Temperature_Celsius -O---K 034 056 000 - 34 (0 19 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 109 099 000 - 22569692 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL,SL R/O 1 SATA NCQ Non-Data log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xb6 GPL VS 1918 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 34/34 Celsius +Lifetime Min/Max Temperature: 19/56 Celsius +Under/Over Temperature Limit Count: 0/3 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (126) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST2000/ST2000NM0033-9ZM175/31771E4AAA9B b/HDD/Seagate/ST2000/ST2000NM0033-9ZM175/31771E4AAA9B new file mode 100644 index 000000000..3c9079073 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000NM0033-9ZM175/31771E4AAA9B @@ -0,0 +1,181 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Constellation ES.3 +Device Model: ST2000NM0033-9ZM175 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SN03 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 30 10:52:53 2020 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 592) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 246) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 078 063 044 - 74783012 + 3 Spin_Up_Time PO---- 095 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 56 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 085 060 030 - 361686735 + 9 Power_On_Hours -O--CK 035 035 000 - 57409 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 56 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 067 059 045 - 33 (Min/Max 29/38) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 26 +193 Load_Cycle_Count -O--CK 099 099 000 - 2462 +194 Temperature_Celsius -O---K 033 041 000 - 33 (0 17 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 048 004 000 - 74783012 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbd GPL VS 512 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc2 GPL,SL VS 50 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 47577 - +# 2 Short offline Completed without error 00% 43690 - +# 3 Extended offline Completed without error 00% 40162 - +# 4 Short offline Completed without error 00% 39993 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 29/38 Celsius +Lifetime Min/Max Temperature: 17/41 Celsius +Under/Over Temperature Limit Count: 0/5746 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (102) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000NM0033-9ZM175/A743B98F5937 b/HDD/Seagate/ST2000/ST2000NM0033-9ZM175/A743B98F5937 new file mode 100644 index 000000000..037a17555 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000NM0033-9ZM175/A743B98F5937 @@ -0,0 +1,216 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Constellation ES.3 +Device Model: ST2000NM0033-9ZM175 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SN06 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 30 11:42:21 2020 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 584) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 238) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 078 063 044 - 81871655 + 3 Spin_Up_Time PO---- 095 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 136 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 087 060 045 - 612856350 + 9 Power_On_Hours -O--CK 076 076 000 - 21547 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 137 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 062 049 040 - 38 (Min/Max 36/39) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 106 +193 Load_Cycle_Count -O--CK 099 099 000 - 3013 +194 Temperature_Celsius -O---K 038 051 000 - 38 (0 20 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 038 010 000 - 81871655 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbd GPL VS 512 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 39 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 36/39 Celsius +Lifetime Min/Max Temperature: 20/51 Celsius +Under/Over Temperature Limit Count: 0/309 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (60) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 137 --- Lifetime Power-On Resets +0x01 0x010 4 21547 --- Power-on Hours +0x01 0x018 6 27963257118 --- Logical Sectors Written +0x01 0x020 6 778018553 --- Number of Write Commands +0x01 0x028 6 4522913698 --- Logical Sectors Read +0x01 0x030 6 131428844 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 21540 --- Spindle Motor Power-on Hours +0x03 0x010 4 446 --- Head Flying Hours +0x03 0x018 4 3013 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 107 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000VN000-1HJ164/52B8D378CB25 b/HDD/Seagate/ST2000/ST2000VN000-1HJ164/52B8D378CB25 new file mode 100644 index 000000000..d31de79dc --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000VN000-1HJ164/52B8D378CB25 @@ -0,0 +1,100 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate NAS HDD +Device Model: ST2000VN000-1HJ164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5900 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Aug 16 00:18:27 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 107) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 257) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 118 100 006 Pre-fail Always - 189832008 + 3 Spin_Up_Time 0x0003 097 095 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 087 087 020 Old_age Always - 13952 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 9441396 + 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 13134 + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3339 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 +189 High_Fly_Writes 0x003a 081 081 000 Old_age Always - 19 +190 Airflow_Temperature_Cel 0x0022 065 051 045 Old_age Always - 35 (Min/Max 24/35) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 102 +193 Load_Cycle_Count 0x0032 093 093 000 Old_age Always - 14133 +194 Temperature_Celsius 0x0022 035 049 000 Old_age Always - 35 (0 14 0 0 0) +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST2000/ST2000VN000-1HJ164/76BD84C3443F b/HDD/Seagate/ST2000/ST2000VN000-1HJ164/76BD84C3443F new file mode 100644 index 000000000..f8b00167e --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000VN000-1HJ164/76BD84C3443F @@ -0,0 +1,98 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate NAS HDD +Device Model: ST2000VN000-1HJ164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5900 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Aug 16 00:18:27 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 107) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 261) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always - 107866784 + 3 Spin_Up_Time 0x0003 097 095 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 088 088 020 Old_age Always - 13045 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 067 060 030 Pre-fail Always - 5970698 + 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13284 + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3327 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 4295032833 +189 High_Fly_Writes 0x003a 085 085 000 Old_age Always - 15 +190 Airflow_Temperature_Cel 0x0022 069 057 045 Old_age Always - 31 (Min/Max 23/31) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 99 +193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 13045 +194 Temperature_Celsius 0x0022 031 043 000 Old_age Always - 31 (0 14 0 0 0) +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 2 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Seagate/ST2000/ST2000VN000-1HJ164/94E31AED550E b/HDD/Seagate/ST2000/ST2000VN000-1HJ164/94E31AED550E new file mode 100644 index 000000000..89590a02f --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000VN000-1HJ164/94E31AED550E @@ -0,0 +1,100 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate NAS HDD +Device Model: ST2000VN000-1HJ164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5900 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Aug 16 00:18:27 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 97) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 254) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 237193448 + 3 Spin_Up_Time 0x0003 097 095 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 088 088 020 Old_age Always - 12499 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 067 060 030 Pre-fail Always - 5445942 + 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13283 + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3329 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032833 +189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1 +190 Airflow_Temperature_Cel 0x0022 066 053 045 Old_age Always - 34 (Min/Max 24/34) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 99 +193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 12499 +194 Temperature_Celsius 0x0022 034 047 000 Old_age Always - 34 (0 15 0 0 0) +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST2000/ST2000VN004-2E4164/052B6B99F9FF b/HDD/Seagate/ST2000/ST2000VN004-2E4164/052B6B99F9FF new file mode 100644 index 000000000..48d92f756 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000VN004-2E4164/052B6B99F9FF @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST2000VN004-2E4164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5900 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 16:26:47 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 192 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 97) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 251) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 113 099 006 - 52827528 + 3 Spin_Up_Time PO---- 098 095 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1947 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 072 060 030 - 15795678 + 9 Power_On_Hours -O--CK 086 086 000 - 13101 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1367 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 052 052 000 - 48 +190 Airflow_Temperature_Cel -O---K 068 065 045 - 32 (Min/Max 26/32) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 199 +193 Load_Cycle_Count -O--CK 100 100 000 - 1955 +194 Temperature_Celsius -O---K 032 040 000 - 32 (0 16 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xd1 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8045 - +# 2 Short offline Completed without error 00% 7122 - +# 3 Short offline Completed without error 00% 7106 - +# 4 Short offline Completed without error 00% 7091 - +# 5 Short offline Completed without error 00% 7079 - +# 6 Short offline Completed without error 00% 7066 - +# 7 Short offline Completed without error 00% 7052 - +# 8 Extended offline Interrupted (host reset) 90% 7036 - +# 9 Short offline Completed without error 00% 7025 - +#10 Short offline Completed without error 00% 7008 - +#11 Short offline Completed without error 00% 6990 - +#12 Short offline Completed without error 00% 6974 - +#13 Short offline Completed without error 00% 6551 - +#14 Short offline Completed without error 00% 6532 - +#15 Short offline Completed without error 00% 6436 - +#16 Short offline Completed without error 00% 6418 - +#17 Short offline Completed without error 00% 6407 - +#18 Short offline Completed without error 00% 6395 - +#19 Short offline Completed without error 00% 6287 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 26/32 Celsius +Lifetime Min/Max Temperature: 16/35 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 94 minutes +Min/Max recommended Temperature: 1/61 Celsius +Min/Max Temperature Limit: 2/60 Celsius +Temperature History Size (Index): 128 (80) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000VN004-2E4164/434B6ED986A5 b/HDD/Seagate/ST2000/ST2000VN004-2E4164/434B6ED986A5 new file mode 100644 index 000000000..b721e196d --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000VN004-2E4164/434B6ED986A5 @@ -0,0 +1,177 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST2000VN004-2E4164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5900 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 3 19:15:53 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 192 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 107) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 266) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 119 099 006 - 234603568 + 3 Spin_Up_Time PO---- 096 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 22 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 084 060 030 - 328136168 + 9 Power_On_Hours -O--CK 080 080 000 - 18188 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 22 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 001 001 000 - 597 +190 Airflow_Temperature_Cel -O---K 067 060 045 - 33 (Min/Max 31/36) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 14 +193 Load_Cycle_Count -O--CK 100 100 000 - 75 +194 Temperature_Celsius -O---K 033 040 000 - 33 (0 25 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xd1 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 10598 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 31/35 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 94 minutes +Min/Max recommended Temperature: 1/61 Celsius +Min/Max Temperature Limit: 2/60 Celsius +Temperature History Size (Index): 128 (96) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST2000/ST2000VN004-2E4164/FF56355BED4F b/HDD/Seagate/ST2000/ST2000VN004-2E4164/FF56355BED4F new file mode 100644 index 000000000..3db0fd631 --- /dev/null +++ b/HDD/Seagate/ST2000/ST2000VN004-2E4164/FF56355BED4F @@ -0,0 +1,178 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST2000VN004-2E4164 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5900 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 3 19:15:53 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 192 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 107) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 79672376 + 3 Spin_Up_Time PO---- 096 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 21 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 084 060 030 - 324070803 + 9 Power_On_Hours -O--CK 080 080 000 - 18188 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 21 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 001 001 000 - 270 +190 Airflow_Temperature_Cel -O---K 067 060 045 - 33 (Min/Max 30/35) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 14 +193 Load_Cycle_Count -O--CK 100 100 000 - 74 +194 Temperature_Celsius -O---K 033 040 000 - 33 (0 24 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xd1 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 10590 - +# 2 Short offline Completed without error 00% 10584 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 30/34 Celsius +Lifetime Min/Max Temperature: 24/39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 94 minutes +Min/Max recommended Temperature: 1/61 Celsius +Min/Max Temperature Limit: 2/60 Celsius +Temperature History Size (Index): 128 (93) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST250/ST250DM000-1BD141/7CA1A6014FD5 b/HDD/Seagate/ST250/ST250DM000-1BD141/7CA1A6014FD5 new file mode 100644 index 000000000..556a88714 --- /dev/null +++ b/HDD/Seagate/ST250/ST250DM000-1BD141/7CA1A6014FD5 @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST250DM000-1BD141 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: KC45 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Aug 25 13:11:05 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 208 (intermediate), recommended: 208 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 39) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 110 099 006 - 27419784 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1598 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 087 060 030 - 578975159 + 9 Power_On_Hours -O--CK 069 069 000 - 27409 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1580 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 068 058 045 - 32 (Min/Max 28/37) +194 Temperature_Celsius -O---K 032 042 000 - 32 (0 18 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 051 036 000 - 27419784 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 27407h+14m+26.989s +241 Total_LBAs_Written ------ 100 253 000 - 1822375553 +242 Total_LBAs_Read ------ 100 253 000 - 2721792541 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 28/37 Celsius +Lifetime Min/Max Temperature: 18/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (32) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3000/ST3000DM001-1CH166/0098D9FDD753 b/HDD/Seagate/ST3000/ST3000DM001-1CH166/0098D9FDD753 new file mode 100644 index 000000000..7f63b65f5 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM001-1CH166/0098D9FDD753 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST3000DM001-1CH166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC24 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 12:02:30 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 592) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 347) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 115 099 006 - 94800360 + 3 Spin_Up_Time PO---- 094 094 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 13 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 062 057 030 - 2092489390608 + 9 Power_On_Hours -O--CK 072 072 000 - 25025 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 13 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 051 051 000 - 49 +190 Airflow_Temperature_Cel -O---K 061 054 045 - 39 (Min/Max 35/46) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 +193 Load_Cycle_Count -O--CK 081 081 000 - 38902 +194 Temperature_Celsius -O---K 039 046 000 - 39 (0 21 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 24046h+23m+53.679s +241 Total_LBAs_Written ------ 100 253 000 - 77383996013 +242 Total_LBAs_Read ------ 100 253 000 - 34982660005 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbd GPL VS 512 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 19336 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 35/46 Celsius +Lifetime Min/Max Temperature: 21/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 23 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3000/ST3000DM001-1CH166/895F4E5D1DCF b/HDD/Seagate/ST3000/ST3000DM001-1CH166/895F4E5D1DCF new file mode 100644 index 000000000..ec0855c64 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM001-1CH166/895F4E5D1DCF @@ -0,0 +1,168 @@ +smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST3000DM001-1CH166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC29 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 19 20:26:12 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 328) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 116 099 006 - 116425640 + 3 Spin_Up_Time PO---- 095 094 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 77 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 080 060 030 - 108020702 + 9 Power_On_Hours -O--CK 064 064 000 - 32162 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 78 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 099 099 000 - 1 +190 Airflow_Temperature_Cel -O---K 061 051 045 - 39 (Min/Max 37/48) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 40 +193 Load_Cycle_Count -O--CK 098 098 000 - 5579 +194 Temperature_Celsius -O---K 039 049 000 - 39 (0 10 0 0 0) +197 Current_Pending_Sector -O--C- 098 098 000 - 328 +198 Offline_Uncorrectable ----C- 098 098 000 - 328 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 31796h+56m+44.945s +241 Total_LBAs_Written ------ 100 253 000 - 64424957324 +242 Total_LBAs_Read ------ 100 253 000 - 57127134448 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +SCT Support Level: 1 +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 37/48 Celsius +Lifetime Min/Max Temperature: 10/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3000/ST3000DM001-1CH166/F0300EFF8B7C b/HDD/Seagate/ST3000/ST3000DM001-1CH166/F0300EFF8B7C new file mode 100644 index 000000000..8b5aa1356 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM001-1CH166/F0300EFF8B7C @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST3000DM001-1CH166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC27 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 23:19:52 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 592) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 338) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 099 006 - 242891440 + 3 Spin_Up_Time PO---- 095 094 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 64 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 085 060 030 - 365473800 + 9 Power_On_Hours -O--CK 036 036 000 - 56919 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 67 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 3 3 3 +189 High_Fly_Writes -O-RCK 096 096 000 - 4 +190 Airflow_Temperature_Cel -O---K 068 053 045 - 32 (Min/Max 30/35) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 33 +193 Load_Cycle_Count -O--CK 031 031 000 - 138714 +194 Temperature_Celsius -O---K 032 047 000 - 32 (0 17 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 55727h+29m+42.232s +241 Total_LBAs_Written ------ 100 253 000 - 96009344177 +242 Total_LBAs_Read ------ 100 253 000 - 19793668718 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 18666 - +# 2 Extended offline Completed without error 00% 17820 - +# 3 Short offline Completed without error 00% 17815 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 30/35 Celsius +Lifetime Min/Max Temperature: 17/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3000/ST3000DM001-1ER166/C3F0931E06DA b/HDD/Seagate/ST3000/ST3000DM001-1ER166/C3F0931E06DA new file mode 100644 index 000000000..dca32c39e --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM001-1ER166/C3F0931E06DA @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST3000DM001-1ER166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC26 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Oct 28 22:13:58 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 89) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 329) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 154430816 + 3 Spin_Up_Time PO---- 094 093 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1600 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 082 060 030 - 193022626 + 9 Power_On_Hours -O--CK 059 059 000 - 36225 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 107 +183 Runtime_Bad_Block -O--CK 045 045 000 - 55 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 097 097 000 - 3 +190 Airflow_Temperature_Cel -O---K 068 051 045 - 32 (Min/Max 28/33) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 8 +193 Load_Cycle_Count -O--CK 001 001 000 - 785011 +194 Temperature_Celsius -O---K 032 049 000 - 32 (0 13 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 +240 Head_Flying_Hours ------ 100 253 000 - 18164h+46m+43.921s +241 Total_LBAs_Written ------ 100 253 000 - 48584641984 +242 Total_LBAs_Read ------ 100 253 000 - 881240591932 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 9997 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 28/33 Celsius +Lifetime Min/Max Temperature: 15/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3000/ST3000DM001-1ER166/D9AB8189C426 b/HDD/Seagate/ST3000/ST3000DM001-1ER166/D9AB8189C426 new file mode 100644 index 000000000..36474afc2 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM001-1ER166/D9AB8189C426 @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT-363681 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST3000DM001-1ER166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC25 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:40:59 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 333) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 108 099 006 - 19718408 + 3 Spin_Up_Time PO---- 095 094 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 29 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 120243640 + 9 Power_On_Hours -O--CK 087 087 000 - 11868 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 29 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 098 000 - 0 0 8 +189 High_Fly_Writes -O-RCK 077 077 000 - 23 +190 Airflow_Temperature_Cel -O---K 063 059 045 - 37 (Min/Max 32/41) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 0 +193 Load_Cycle_Count -O--CK 085 085 000 - 30565 +194 Temperature_Celsius -O---K 037 041 000 - 37 (0 22 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 10944h+12m+39.664s +241 Total_LBAs_Written ------ 100 253 000 - 68004509879 +242 Total_LBAs_Read ------ 100 253 000 - 99937287963 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 32/41 Celsius +Lifetime Min/Max Temperature: 22/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3000/ST3000DM001-1ER166/F6CA725A5C1F b/HDD/Seagate/ST3000/ST3000DM001-1ER166/F6CA725A5C1F new file mode 100644 index 000000000..adadb59ee --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM001-1ER166/F6CA725A5C1F @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST3000DM001-1ER166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC25 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Oct 28 22:13:59 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 314) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 66575736 + 3 Spin_Up_Time PO---- 095 094 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1785 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 083 060 030 - 207828762 + 9 Power_On_Hours -O--CK 055 055 000 - 39755 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 118 +183 Runtime_Bad_Block -O--CK 087 087 000 - 13 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 096 096 000 - 4 +190 Airflow_Temperature_Cel -O---K 067 052 045 - 33 (Min/Max 29/34) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 15 +193 Load_Cycle_Count -O--CK 001 001 000 - 864538 +194 Temperature_Celsius -O---K 033 048 000 - 33 (0 13 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 19777h+29m+49.190s +241 Total_LBAs_Written ------ 100 253 000 - 59462759707 +242 Total_LBAs_Read ------ 100 253 000 - 1040209230733 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 13545 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 29/34 Celsius +Lifetime Min/Max Temperature: 15/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3000/ST3000DM001-9YN166/2D9EB1468FF5 b/HDD/Seagate/ST3000/ST3000DM001-9YN166/2D9EB1468FF5 new file mode 100644 index 000000000..b805d758e --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM001-9YN166/2D9EB1468FF5 @@ -0,0 +1,194 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST3000DM001-9YN166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC4H +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Sep 14 00:17:02 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 584) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 334) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 108 099 006 - 217034608 + 3 Spin_Up_Time PO---- 096 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 68 + 5 Reallocated_Sector_Ct PO--CK 096 096 036 - 6144 + 7 Seek_Error_Rate POSR-- 065 060 030 - 64478172982 + 9 Power_On_Hours -O--CK 079 079 000 - 18973 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 68 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 086 086 000 - 14 +188 Command_Timeout -O--CK 100 099 000 - 3 3 3 +189 High_Fly_Writes -O-RCK 098 098 000 - 2 +190 Airflow_Temperature_Cel -O---K 069 057 045 - 31 (Min/Max 29/33) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 53 +193 Load_Cycle_Count -O--CK 076 076 000 - 48270 +194 Temperature_Celsius -O---K 031 043 000 - 31 (0 15 0 0 0) +197 Current_Pending_Sector -O--C- 099 098 000 - 320 +198 Offline_Uncorrectable ----C- 099 098 000 - 320 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 2979h+58m+44.013s +241 Total_LBAs_Written ------ 100 253 000 - 107550800210887 +242 Total_LBAs_Read ------ 100 253 000 - 192367785952305 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5067 Device vendor specific log +0xbd GPL VS 512 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 18574 hours (773 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 83 59 6e 40 00 00 Error: UNC at LBA = 0x83596e40 = 2203676224 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 83 59 6e 40 40 00 33d+22:39:10.749 READ FPDMA QUEUED + 60 00 00 00 08 00 00 83 59 51 88 40 00 33d+22:39:10.718 READ FPDMA QUEUED + 60 00 00 00 08 00 00 83 5c 4b f8 40 00 33d+22:39:10.709 READ FPDMA QUEUED + 60 00 00 00 08 00 00 65 a3 9d e0 40 00 33d+22:39:10.707 READ FPDMA QUEUED + 60 00 00 00 08 00 00 65 a3 99 c8 40 00 33d+22:39:10.680 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 29/33 Celsius +Lifetime Min/Max Temperature: 15/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 180 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3000/ST3000DM001-9YN166/2E0635656E5E b/HDD/Seagate/ST3000/ST3000DM001-9YN166/2E0635656E5E new file mode 100644 index 000000000..620d99a81 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM001-9YN166/2E0635656E5E @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST3000DM001-9YN166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC4H +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Sep 14 00:17:02 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 325) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 109 099 006 - 23877880 + 3 Spin_Up_Time PO---- 092 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 44 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 077 060 030 - 54022571 + 9 Power_On_Hours -O--CK 079 079 000 - 18975 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 44 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 098 000 - 4 4 4 +189 High_Fly_Writes -O-RCK 099 099 000 - 1 +190 Airflow_Temperature_Cel -O---K 068 054 045 - 32 (Min/Max 23/33) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 30 +193 Load_Cycle_Count -O--CK 071 071 000 - 58664 +194 Temperature_Celsius -O---K 032 046 000 - 32 (0 15 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 2932h+26m+59.426s +241 Total_LBAs_Written ------ 100 253 000 - 107592483593205 +242 Total_LBAs_Read ------ 100 253 000 - 190898978764061 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5067 Device vendor specific log +0xbd GPL VS 512 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 23/33 Celsius +Lifetime Min/Max Temperature: 15/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 179 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 7 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3000/ST3000DM007-1WY10G/4A419050EC4E b/HDD/Seagate/ST3000/ST3000DM007-1WY10G/4A419050EC4E new file mode 100644 index 000000000..1fd66cab8 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM007-1WY10G/4A419050EC4E @@ -0,0 +1,105 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda Compute +Device Model: ST3000DM007-1WY10G +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 16:31:11 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 367) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 077 073 006 Pre-fail Always - 52687396 + 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 123 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 064 060 045 Pre-fail Always - 2633054 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 706 (150 146 0) + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 123 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 066 055 040 Old_age Always - 34 (Min/Max 22/34) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 10 +193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 209 +194 Temperature_Celsius 0x0022 034 045 000 Old_age Always - 34 (0 19 0 0 0) +195 Hardware_ECC_Recovered 0x001a 077 073 000 Old_age Always - 52687396 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 46 (54 125 0) +241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3348649254 +242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 35495249 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST3000/ST3000DM008-2DM166/7DDF67C7B209 b/HDD/Seagate/ST3000/ST3000DM008-2DM166/7DDF67C7B209 new file mode 100644 index 000000000..2c4ed44e8 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM008-2DM166/7DDF67C7B209 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate BarraCuda 3.5 +Device Model: ST3000DM008-2DM166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC26 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:17 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 89) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 320) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 126889096 + 3 Spin_Up_Time PO---- 094 094 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 57 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 080 060 030 - 107824062 + 9 Power_On_Hours -O--CK 080 080 000 - 17682 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 57 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 4 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 063 056 045 - 37 (Min/Max 33/39) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 49 +193 Load_Cycle_Count -O--CK 100 100 000 - 1616 +194 Temperature_Celsius -O---K 037 044 000 - 37 (0 22 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 17594h+44m+15.205s +241 Total_LBAs_Written ------ 100 253 000 - 40509587958 +242 Total_LBAs_Read ------ 100 253 000 - 161750717113 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 17507 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 34/39 Celsius +Lifetime Min/Max Temperature: 22/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3000/ST3000DM008-2DM166/ACAA450B8C63 b/HDD/Seagate/ST3000/ST3000DM008-2DM166/ACAA450B8C63 new file mode 100644 index 000000000..b412a6ebc --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM008-2DM166/ACAA450B8C63 @@ -0,0 +1,318 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST3000DM008-2DM166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC26 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 12:06:13 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 325) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 138959032 + 3 Spin_Up_Time PO---- 093 093 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 35 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 076 060 030 - 47244791 + 9 Power_On_Hours -O--CK 071 071 000 - 26220 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 32 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 030 030 000 - 70 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 065 056 045 - 35 (Min/Max 20/40) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 11 +193 Load_Cycle_Count -O--CK 001 001 000 - 441142 +194 Temperature_Celsius -O---K 035 044 000 - 35 (0 16 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 4712h+40m+59.810s +241 Total_LBAs_Written ------ 100 253 000 - 12802994950 +242 Total_LBAs_Read ------ 100 253 000 - 728890358844 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 70 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 70 [9] occurred at disk power-on lifetime: 22122 hours (921 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 01 54 4c 99 08 00 00 Error: UNC at LBA = 0x1544c9908 = 5709273352 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 01 54 4c 9c 28 40 00 47d+20:57:12.099 READ FPDMA QUEUED + 60 00 00 00 c0 00 01 54 4c 9b 68 40 00 47d+20:57:12.099 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 9a 68 40 00 47d+20:57:12.099 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 99 68 40 00 47d+20:57:12.099 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 98 68 40 00 47d+20:57:12.098 READ FPDMA QUEUED + +Error 69 [8] occurred at disk power-on lifetime: 22122 hours (921 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 01 54 4c 99 08 00 00 Error: UNC at LBA = 0x1544c9908 = 5709273352 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 01 54 4c 9c 28 40 00 47d+20:57:08.428 READ FPDMA QUEUED + 60 00 00 00 c0 00 01 54 4c 9b 68 40 00 47d+20:57:08.428 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 9a 68 40 00 47d+20:57:08.428 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 99 68 40 00 47d+20:57:08.428 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 98 68 40 00 47d+20:57:08.427 READ FPDMA QUEUED + +Error 68 [7] occurred at disk power-on lifetime: 22122 hours (921 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 01 54 4c 99 08 00 00 Error: UNC at LBA = 0x1544c9908 = 5709273352 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 01 54 4c 9c 28 40 00 47d+20:57:04.735 READ FPDMA QUEUED + 60 00 00 00 c0 00 01 54 4c 9b 68 40 00 47d+20:57:04.735 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 9a 68 40 00 47d+20:57:04.735 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 99 68 40 00 47d+20:57:04.735 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 98 68 40 00 47d+20:57:04.734 READ FPDMA QUEUED + +Error 67 [6] occurred at disk power-on lifetime: 22122 hours (921 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 01 54 4c 99 08 00 00 Error: WP at LBA = 0x1544c9908 = 5709273352 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 08 00 01 53 ba c5 70 40 00 47d+20:57:01.019 WRITE FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 9c 28 40 00 47d+20:57:01.018 READ FPDMA QUEUED + 60 00 00 00 c0 00 01 54 4c 9b 68 40 00 47d+20:57:01.018 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 9a 68 40 00 47d+20:57:01.018 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 99 68 40 00 47d+20:57:01.018 READ FPDMA QUEUED + +Error 66 [5] occurred at disk power-on lifetime: 22122 hours (921 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 01 54 4c 99 08 00 00 Error: UNC at LBA = 0x1544c9908 = 5709273352 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 c0 00 01 54 4c 9b 68 40 00 47d+20:56:57.471 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 9a 68 40 00 47d+20:56:57.471 READ FPDMA QUEUED + 60 00 00 01 00 00 01 54 4c 99 68 40 00 47d+20:56:57.471 READ FPDMA QUEUED + 60 00 00 00 08 00 01 54 49 60 80 40 00 47d+20:56:55.854 READ FPDMA QUEUED + 60 00 00 00 98 00 01 54 49 5f 68 40 00 47d+20:56:55.852 READ FPDMA QUEUED + +Error 65 [4] occurred at disk power-on lifetime: 22122 hours (921 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 01 52 b3 88 c0 00 00 Error: UNC at LBA = 0x152b388c0 = 5682464960 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 01 52 b3 8c f0 40 00 47d+20:55:01.266 READ FPDMA QUEUED + 60 00 00 01 00 00 01 52 b3 8b f0 40 00 47d+20:55:01.266 READ FPDMA QUEUED + 60 00 00 00 20 00 01 52 b3 8b d0 40 00 47d+20:55:01.266 READ FPDMA QUEUED + 60 00 00 01 00 00 01 52 b3 8a d0 40 00 47d+20:55:01.266 READ FPDMA QUEUED + 60 00 00 01 00 00 01 52 b3 89 d0 40 00 47d+20:55:01.266 READ FPDMA QUEUED + +Error 64 [3] occurred at disk power-on lifetime: 22122 hours (921 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 01 52 b3 88 c0 00 00 Error: UNC at LBA = 0x152b388c0 = 5682464960 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 01 52 b3 8c f0 40 00 47d+20:54:57.601 READ FPDMA QUEUED + 60 00 00 01 00 00 01 52 b3 8b f0 40 00 47d+20:54:57.601 READ FPDMA QUEUED + 60 00 00 00 20 00 01 52 b3 8b d0 40 00 47d+20:54:57.601 READ FPDMA QUEUED + 60 00 00 01 00 00 01 52 b3 8a d0 40 00 47d+20:54:57.601 READ FPDMA QUEUED + 60 00 00 01 00 00 01 52 b3 89 d0 40 00 47d+20:54:57.601 READ FPDMA QUEUED + +Error 63 [2] occurred at disk power-on lifetime: 22122 hours (921 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 01 52 b3 88 c0 00 00 Error: WP at LBA = 0x152b388c0 = 5682464960 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 08 00 01 53 ba c4 50 40 00 47d+20:54:53.897 WRITE FPDMA QUEUED + 60 00 00 01 00 00 01 52 b3 8c f0 40 00 47d+20:54:53.897 READ FPDMA QUEUED + 60 00 00 01 00 00 01 52 b3 8b f0 40 00 47d+20:54:53.897 READ FPDMA QUEUED + 60 00 00 00 20 00 01 52 b3 8b d0 40 00 47d+20:54:53.897 READ FPDMA QUEUED + 60 00 00 01 00 00 01 52 b3 8a d0 40 00 47d+20:54:53.897 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 20/40 Celsius +Lifetime Min/Max Temperature: 16/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3000/ST3000DM008-2DM166/C40952F324DB b/HDD/Seagate/ST3000/ST3000DM008-2DM166/C40952F324DB new file mode 100644 index 000000000..c46ad5616 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000DM008-2DM166/C40952F324DB @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST3000DM008-2DM166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC26 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 16 03:47:02 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 89) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 322) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 193658840 + 3 Spin_Up_Time PO---- 094 094 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1280 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 063 056 030 - 154684789029 + 9 Power_On_Hours -O--CK 095 095 000 - 4961 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1280 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 099 099 000 - 1 +190 Airflow_Temperature_Cel -O---K 069 058 045 - 31 (Min/Max 22/31) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 30 +193 Load_Cycle_Count -O--CK 099 099 000 - 2340 +194 Temperature_Celsius -O---K 031 042 000 - 31 (0 16 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 4959h+27m+43.057s +241 Total_LBAs_Written ------ 100 253 000 - 14759807639 +242 Total_LBAs_Read ------ 100 253 000 - 407254688506 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 22/30 Celsius +Lifetime Min/Max Temperature: 16/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3000/ST3000NM0033-9ZM178/CC42861809C6 b/HDD/Seagate/ST3000/ST3000NM0033-9ZM178/CC42861809C6 new file mode 100644 index 000000000..1fd2eca40 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000NM0033-9ZM178/CC42861809C6 @@ -0,0 +1,214 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Constellation ES.3 +Device Model: ST3000NM0033-9ZM178 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SN06 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:33:08 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 592) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 370) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 082 063 044 - 170982180 + 3 Spin_Up_Time PO---- 092 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 9 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 091 060 045 - 1411622613 + 9 Power_On_Hours -O--CK 087 087 000 - 12197 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 9 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 099 099 000 - 1 +190 Airflow_Temperature_Cel -O---K 070 061 040 - 30 (Min/Max 26/32) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 7 +193 Load_Cycle_Count -O--CK 100 100 000 - 574 +194 Temperature_Celsius -O---K 030 040 000 - 30 (0 24 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 049 034 000 - 170982180 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbd GPL VS 512 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 39 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 26/32 Celsius +Lifetime Min/Max Temperature: 24/39 Celsius +Under/Over Temperature Limit Count: 0/42285 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (103) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 12197 --- Power-on Hours +0x01 0x018 6 84404799772 --- Logical Sectors Written +0x01 0x020 6 1711103215 --- Number of Write Commands +0x01 0x028 6 31968570019 --- Logical Sectors Read +0x01 0x030 6 177367241 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 12192 --- Spindle Motor Power-on Hours +0x03 0x010 4 154 --- Head Flying Hours +0x03 0x018 4 574 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 8 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 26 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 30 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3000/ST3000VN007-2E4166/62148685A0B0 b/HDD/Seagate/ST3000/ST3000VN007-2E4166/62148685A0B0 new file mode 100644 index 000000000..4c70f47b6 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000VN007-2E4166/62148685A0B0 @@ -0,0 +1,177 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST3000VN007-2E4166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5900 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 26 06:27:07 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 192 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 38) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 97) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 371) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 123127144 + 3 Spin_Up_Time PO---- 093 093 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 28 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 065 060 030 - 3585579 + 9 Power_On_Hours -O--CK 098 098 000 - 2431 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 29 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 091 091 000 - 9 +190 Airflow_Temperature_Cel -O---K 057 053 045 - 43 (Min/Max 29/47) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 16 +193 Load_Cycle_Count -O--CK 100 100 000 - 32 +194 Temperature_Celsius -O---K 043 047 000 - 43 (0 18 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xd1 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 60% 2244 - +# 2 Extended offline Interrupted (host reset) 90% 2223 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 29/47 Celsius +Lifetime Min/Max Temperature: 18/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 94 minutes +Min/Max recommended Temperature: 1/61 Celsius +Min/Max Temperature Limit: 2/60 Celsius +Temperature History Size (Index): 128 (36) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3000/ST3000VN007-2E4166/C7FC4906F9B1 b/HDD/Seagate/ST3000/ST3000VN007-2E4166/C7FC4906F9B1 new file mode 100644 index 000000000..0260aebe9 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000VN007-2E4166/C7FC4906F9B1 @@ -0,0 +1,175 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST3000VN007-2E4166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5900 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 26 06:27:07 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 192 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 38) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 107) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 383) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 80321264 + 3 Spin_Up_Time PO---- 093 093 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 29 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 066 060 030 - 3719937 + 9 Power_On_Hours -O--CK 098 098 000 - 2431 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 30 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 055 055 000 - 45 +190 Airflow_Temperature_Cel -O---K 056 051 045 - 44 (Min/Max 37/49) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 16 +193 Load_Cycle_Count -O--CK 100 100 000 - 33 +194 Temperature_Celsius -O---K 044 049 000 - 44 (0 19 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xd1 GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 60% 2244 - +# 2 Extended offline Interrupted (host reset) 90% 2222 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 37/49 Celsius +Lifetime Min/Max Temperature: 19/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 94 minutes +Min/Max recommended Temperature: 1/61 Celsius +Min/Max Temperature Limit: 2/60 Celsius +Temperature History Size (Index): 128 (53) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3000/ST3000VX000-1ES166/E2E3690A3D6C b/HDD/Seagate/ST3000/ST3000VX000-1ES166/E2E3690A3D6C new file mode 100644 index 000000000..c2f8714e1 --- /dev/null +++ b/HDD/Seagate/ST3000/ST3000VX000-1ES166/E2E3690A3D6C @@ -0,0 +1,177 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Surveillance +Device Model: ST3000VX000-1ES166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CV27 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:27 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 192 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 307) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10b9) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 099 006 - 235550048 + 3 Spin_Up_Time PO---- 094 093 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 111 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 082 060 030 - 172399582 + 9 Power_On_Hours -O--CK 070 070 000 - 26583 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 111 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 001 001 000 - 115 +190 Airflow_Temperature_Cel -O---K 061 058 045 - 39 (Min/Max 36/42) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 109 +193 Load_Cycle_Count -O--CK 100 100 000 - 182 +194 Temperature_Celsius -O---K 039 042 000 - 39 (0 23 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 26422 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 36/42 Celsius +Lifetime Min/Max Temperature: 23/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 94 minutes +Min/Max recommended Temperature: 1/61 Celsius +Min/Max Temperature Limit: 2/60 Celsius +Temperature History Size (Index): 128 (9) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3100/ST31000424CS/122A9A84A4D7 b/HDD/Seagate/ST3100/ST31000424CS/122A9A84A4D7 new file mode 100644 index 000000000..97cb0de41 --- /dev/null +++ b/HDD/Seagate/ST3100/ST31000424CS/122A9A84A4D7 @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Pipeline HD 5900.2 +Device Model: ST31000424CS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CA13 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5900 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Nov 1 08:23:33 2020 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 192 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 623) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 215) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103b) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 108 099 006 - 20741703 + 3 Spin_Up_Time PO---- 095 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 50 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 159009101 + 9 Power_On_Hours -O--CK 081 081 000 - 17311 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 25 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 099 099 000 - 1 +190 Airflow_Temperature_Cel -O---K 062 051 045 - 38 (Min/Max 33/47) +194 Temperature_Celsius -O---K 038 049 000 - 38 (0 18 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 048 031 000 - 20741703 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 33/47 Celsius +Lifetime Min/Max Temperature: 18/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 2 minutes +Temperature Logging Interval: 94 minutes +Min/Max recommended Temperature: 1/61 Celsius +Min/Max Temperature Limit: 2/60 Celsius +Temperature History Size (Index): 128 (76) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3100/ST31000524AS/0CD1FED7EC87 b/HDD/Seagate/ST3100/ST31000524AS/0CD1FED7EC87 new file mode 100644 index 000000000..5b5b59fc7 --- /dev/null +++ b/HDD/Seagate/ST3100/ST31000524AS/0CD1FED7EC87 @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST31000524AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: JC45 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 11:07:18 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 208 (intermediate), recommended: 208 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 168) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 108 099 006 - 16960085 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 120 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 140052226 + 9 Power_On_Hours -O--CK 085 085 000 - 13811 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 117 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 076 053 045 - 24 (Min/Max 21/29) +194 Temperature_Celsius -O---K 024 047 000 - 24 (0 14 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 012 012 000 - 16960085 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 14078 (243 135 0) +241 Total_LBAs_Written ------ 100 253 000 - 2181726283 +242 Total_LBAs_Read ------ 100 253 000 - 3637441197 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 21/29 Celsius +Lifetime Min/Max Temperature: 14/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (57) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3100/ST31000524AS/747BEB7577B7 b/HDD/Seagate/ST3100/ST31000524AS/747BEB7577B7 new file mode 100644 index 000000000..23fc568a7 --- /dev/null +++ b/HDD/Seagate/ST3100/ST31000524AS/747BEB7577B7 @@ -0,0 +1,179 @@ +smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-RELEASE amd64] (local build) +Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST31000524AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: JC45 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Jul 15 14:06:21 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 208 (intermediate), recommended: 208 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 172) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 112 099 006 - 45277509 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 336 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 082 060 030 - 186506505 + 9 Power_On_Hours -O--CK 030 030 000 - 62185 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 346 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 055 046 045 - 45 (Min/Max 37/52) +194 Temperature_Celsius -O---K 045 054 000 - 45 (0 15 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 028 015 000 - 45277509 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 62978 (227 160 0) +241 Total_LBAs_Written ------ 100 253 000 - 2896982408 +242 Total_LBAs_Read ------ 100 253 000 - 2834649584 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers +Read GP Log Directory failed + +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x09 SL R/W 1 Selective self-test log +0x80-0x9f SL R/W 16 Host vendor specific log +0xa1 SL VS 20 Device vendor specific log +0xa8 SL VS 129 Device vendor specific log +0xa9 SL VS 1 Device vendor specific log +0xc0 SL VS 1 Device vendor specific log +0xe0 SL R/W 1 SCT Command/Status +0xe1 SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 62169 - +# 2 Short offline Completed without error 00% 62145 - +# 3 Short offline Completed without error 00% 62121 - +# 4 Extended offline Completed without error 00% 62101 - +# 5 Short offline Completed without error 00% 62097 - +# 6 Short offline Completed without error 00% 62073 - +# 7 Short offline Completed without error 00% 62049 - +# 8 Short offline Completed without error 00% 62025 - +# 9 Short offline Completed without error 00% 62001 - +#10 Short offline Completed without error 00% 61977 - +#11 Short offline Completed without error 00% 61953 - +#12 Extended offline Completed without error 00% 61933 - +#13 Short offline Completed without error 00% 61929 - +#14 Short offline Completed without error 00% 61905 - +#15 Short offline Completed without error 00% 61881 - +#16 Short offline Completed without error 00% 61857 - +#17 Short offline Completed without error 00% 61833 - +#18 Short offline Completed without error 00% 61809 - +#19 Short offline Completed without error 00% 61785 - +#20 Extended offline Completed without error 00% 61765 - +#21 Short offline Completed without error 00% 61761 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +SCT Support Level: 1 +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 37/52 Celsius +Lifetime Min/Max Temperature: 15/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (96) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers +Read SATA Phy Event Counters failed + diff --git a/HDD/Seagate/ST3100/ST31000524AS/A286C6483F0D b/HDD/Seagate/ST3100/ST31000524AS/A286C6483F0D new file mode 100644 index 000000000..d825d7b7c --- /dev/null +++ b/HDD/Seagate/ST3100/ST31000524AS/A286C6483F0D @@ -0,0 +1,175 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST31000524AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: JC45 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 26 06:24:56 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 208 (intermediate), recommended: 208 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 609) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 170) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 106 099 006 - 11968927 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 411 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 084 060 030 - 245737887 + 9 Power_On_Hours -O--CK 064 064 000 - 32114 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 414 +183 Runtime_Bad_Block -O--CK 096 096 000 - 4 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 054 000 - 4295032915 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 055 045 - 41 (Min/Max 32/45) +194 Temperature_Celsius -O---K 041 045 000 - 41 (0 16 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 044 009 000 - 11968927 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 91 +240 Head_Flying_Hours ------ 100 253 000 - 32877 (102 91 0) +241 Total_LBAs_Written ------ 100 253 000 - 509497178 +242 Total_LBAs_Read ------ 100 253 000 - 1762470867 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 60% 26663 - +# 2 Extended offline Completed without error 00% 25082 - +# 3 Extended offline Completed without error 00% 22985 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 32/45 Celsius +Lifetime Min/Max Temperature: 16/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (13) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3100/ST31000528AS/EC2074BADF06 b/HDD/Seagate/ST3100/ST31000528AS/EC2074BADF06 new file mode 100644 index 000000000..8cc4c7b73 --- /dev/null +++ b/HDD/Seagate/ST3100/ST31000528AS/EC2074BADF06 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST31000528AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC49 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Jul 3 11:15:16 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 182) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 115 100 006 - 86465290 + 3 Spin_Up_Time PO---- 094 094 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1126 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 069 060 030 - 9573076 + 9 Power_On_Hours -O--CK 100 100 000 - 424 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 563 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 094 000 - 404 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 069 068 045 - 31 (Min/Max 20/31) +194 Temperature_Celsius -O---K 031 040 000 - 31 (0 13 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 037 034 000 - 86465290 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 1867 (53 46 0) +241 Total_LBAs_Written ------ 100 253 000 - 2875567968 +242 Total_LBAs_Read ------ 100 253 000 - 1322205778 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 20/31 Celsius +Lifetime Min/Max Temperature: 13/32 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (72) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3120/ST3120026A/1ACE6E50BC9B b/HDD/Seagate/ST3120/ST3120026A/1ACE6E50BC9B new file mode 100644 index 000000000..39e89d6b0 --- /dev/null +++ b/HDD/Seagate/ST3120/ST3120026A/1ACE6E50BC9B @@ -0,0 +1,228 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus +Device Model: ST3120026A +Serial Number: -- +Firmware Version: 3.06 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 +Local Time is: Thu Sep 3 15:35:42 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 059 053 006 - 49121878 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 18 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 3 + 7 Seek_Error_Rate POSR-- 077 060 030 - 56507429 + 9 Power_On_Hours -O--CK 071 071 000 - 25826 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1131 +194 Temperature_Celsius -O---K 031 055 000 - 31 +195 Hardware_ECC_Recovered -O-RC- 059 052 000 - 49121878 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 191 000 - 16 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory not supported + +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 SL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x20 SL R/O 1 Streaming performance log [OBS-8] +0x21 SL R/O 1 Write stream error log +0x22 SL R/O 1 Read stream error log +0x23 SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f SL R/W 16 Host vendor specific log +0xa0 SL VS 1 Device vendor specific log +0xa1 SL VS 20 Device vendor specific log +0xa2 SL VS 101 Device vendor specific log +0xa8 SL VS 20 Device vendor specific log +0xa9 SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +ATA Error Count: 96 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 96 occurred at disk power-on lifetime: 6036 hours (251 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 f9 0a e0 e4 Error: UNC at LBA = 0x04e00af9 = 81791737 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 f8 0a e0 e4 00 00:04:23.996 READ DMA + 27 00 00 00 00 00 e0 00 00:04:23.996 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 02 00:04:23.988 IDENTIFY DEVICE + ef 03 45 00 00 00 a0 02 00:04:31.928 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 e0 00 00:04:31.927 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 95 occurred at disk power-on lifetime: 6036 hours (251 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 f9 0a e0 e4 Error: UNC at LBA = 0x04e00af9 = 81791737 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 f8 0a e0 e4 00 00:04:23.996 READ DMA + 27 00 00 00 00 00 e0 00 00:04:23.996 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 02 00:04:23.988 IDENTIFY DEVICE + ef 03 45 00 00 00 a0 02 00:04:23.980 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 e0 00 00:04:23.980 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 94 occurred at disk power-on lifetime: 6036 hours (251 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 f9 0a e0 e4 Error: UNC at LBA = 0x04e00af9 = 81791737 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 f8 0a e0 e4 00 00:04:23.996 READ DMA + 27 00 00 00 00 00 e0 00 00:04:23.996 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 02 00:04:23.988 IDENTIFY DEVICE + ef 03 45 00 00 00 a0 02 00:04:23.980 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 e0 00 00:04:23.980 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 93 occurred at disk power-on lifetime: 6036 hours (251 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 f9 0a e0 e4 Error: UNC at LBA = 0x04e00af9 = 81791737 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 f8 0a e0 e4 00 00:04:16.057 READ DMA + 27 00 00 00 00 00 e0 00 00:04:16.056 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 02 00:04:16.050 IDENTIFY DEVICE + ef 03 45 00 00 00 a0 02 00:04:12.100 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 e0 00 00:04:12.099 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 92 occurred at disk power-on lifetime: 6036 hours (251 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 f9 0a e0 e4 Error: UNC at LBA = 0x04e00af9 = 81791737 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 08 f8 0a e0 e4 00 00:04:16.057 READ DMA + 27 00 00 00 00 00 e0 00 00:04:16.056 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 02 00:04:16.050 IDENTIFY DEVICE + ef 03 45 00 00 00 a0 02 00:04:12.100 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 e0 00 00:04:12.099 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/HDD/Seagate/ST3120/ST3120211AS/9995C471335F b/HDD/Seagate/ST3120/ST3120211AS/9995C471335F new file mode 100644 index 000000000..792338761 --- /dev/null +++ b/HDD/Seagate/ST3120/ST3120211AS/9995C471335F @@ -0,0 +1,85 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.9 +Device Model: ST3120211AS +Serial Number: -- +Firmware Version: 3.AAE +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Tue Oct 20 19:35:01 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 51) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 115 084 006 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 250 + 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1 + 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 635769891 + 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 12208 + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 289 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 078 049 045 Old_age Always - 22 (Min/Max 21/24) +194 Temperature_Celsius 0x0022 022 051 000 Old_age Always - 22 (0 10 0 0 0) +195 Hardware_ECC_Recovered 0x001a 057 046 000 Old_age Always - 15700593 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 +202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Seagate/ST3150/ST31500341AS/F96295A1AE10 b/HDD/Seagate/ST3150/ST31500341AS/F96295A1AE10 new file mode 100644 index 000000000..171ec4552 --- /dev/null +++ b/HDD/Seagate/ST3150/ST31500341AS/F96295A1AE10 @@ -0,0 +1,168 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.11 +Device Model: ST31500341AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC1H +User Capacity: 1,500,301,910,016 bytes [1.50 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Oct 29 15:33:02 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 0 (vendor specific), recommended: 254 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 625) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 291) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 113 100 006 - 53629023 + 3 Spin_Up_Time PO---- 100 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 266 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 + 7 Seek_Error_Rate POSR-- 069 060 030 - 10397732 + 9 Power_On_Hours -O--CK 099 099 000 - 882 + 10 Spin_Retry_Count PO--C- 100 100 097 - 2 + 12 Power_Cycle_Count -O--CK 100 100 020 - 62 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 17180131332 +189 High_Fly_Writes -O-RCK 045 045 000 - 55 +190 Airflow_Temperature_Cel -O---K 056 048 045 - 44 (Min/Max 20/46) +194 Temperature_Celsius -O---K 044 052 000 - 44 (0 14 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 044 030 000 - 53629023 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 661 (127 140 0) +241 Total_LBAs_Written ------ 100 253 000 - 4241740370 +242 Total_LBAs_Read ------ 100 253 000 - 2329198660 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 691 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 20/46 Celsius +Lifetime Min/Max Temperature: 14/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (23) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3160/ST3160815A/88A8A234BCF5 b/HDD/Seagate/ST3160/ST3160815A/88A8A234BCF5 new file mode 100644 index 000000000..76c6611e1 --- /dev/null +++ b/HDD/Seagate/ST3160/ST3160815A/88A8A234BCF5 @@ -0,0 +1,303 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.10 +Device Model: ST3160815A +Serial Number: -- +Firmware Version: 3.AAD +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Sun Oct 4 21:30:13 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 54) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 116 097 006 - 115850653 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 075 075 020 - 26327 + 5 Reallocated_Sector_Ct PO--CK 099 099 036 - 41 + 7 Seek_Error_Rate POSR-- 083 060 030 - 220811090 + 9 Power_On_Hours -O--CK 001 001 000 - 97309 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1642 +187 Reported_Uncorrect -O--CK 001 001 000 - 1785 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 036 045 Past 41 (Min/Max 40/43 #10179) +194 Temperature_Celsius -O---K 041 064 000 - 41 (0 15 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 064 063 000 - 92936434 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 1 Device vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL,SL VS 101 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer +0xff GPL - 23552 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 1785 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1785 [4] occurred at disk power-on lifetime: 23458 hours (977 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 98 0b bf 81 98 81 eb 00 Error: UNC at LBA = 0x980bbf819881 = 167176225003649 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 40 00 0b bf 00 98 62 eb 00 05:41:36.311 READ DMA + c8 00 00 00 40 00 0b bf 00 98 62 eb 00 05:41:47.896 READ DMA + c8 00 00 00 40 00 0b bf 00 98 62 eb 00 05:41:45.009 READ DMA + c8 00 00 00 40 00 0b bf 00 98 62 eb 00 05:41:42.122 READ DMA + c8 00 00 00 40 00 0b bf 00 98 62 eb 00 05:41:39.236 READ DMA + +Error 1784 [3] occurred at disk power-on lifetime: 25373 hours (1057 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 0d 0c b8 d6 0d d6 ec 00 Error: UNC at LBA = 0xd0cbcd60dd6 = 14348358913494 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.886 READ DMA + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.567 READ DMA + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.314 READ DMA + c8 00 00 01 00 00 0b 8a 00 8c 22 eb 00 08:21:18.985 READ DMA + c8 00 00 01 00 00 0b 89 00 8c 22 eb 00 08:21:18.743 READ DMA + +Error 1783 [2] occurred at disk power-on lifetime: 25373 hours (1057 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 0d 0c b8 d6 0d d6 ec 00 Error: UNC at LBA = 0xd0cbcd60dd6 = 14348358913494 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.886 READ DMA + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.567 READ DMA + c8 00 00 01 00 00 0b 8a 00 8c 22 eb 00 08:21:19.314 READ DMA + c8 00 00 01 00 00 0b 89 00 8c 22 eb 00 08:21:18.985 READ DMA + c8 00 00 01 00 00 0b 88 00 8c 22 eb 00 08:21:18.743 READ DMA + +Error 1782 [1] occurred at disk power-on lifetime: 25373 hours (1057 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 8c 0c b8 d6 0d d6 ec 00 Error: UNC at LBA = 0x8c0cbcd60dd6 = 153986335641046 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.886 READ DMA + c8 00 00 01 00 00 0b 8a 00 8c 22 eb 00 08:21:19.567 READ DMA + c8 00 00 01 00 00 0b 89 00 8c 22 eb 00 08:21:19.314 READ DMA + c8 00 00 01 00 00 0b 88 00 8c 22 eb 00 08:21:18.985 READ DMA + c8 00 00 01 00 00 0b 87 00 8c 22 eb 00 08:21:18.743 READ DMA + +Error 1781 [0] occurred at disk power-on lifetime: 23458 hours (977 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 98 0b bf 81 98 81 eb 00 Error: UNC at LBA = 0x980bbf819881 = 167176225003649 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 40 00 0b bf 00 98 62 eb 00 05:41:36.311 READ DMA + c8 00 00 00 40 00 0b bf 00 98 62 eb 00 05:41:47.896 READ DMA + c8 00 00 00 40 00 0b bf 00 98 62 eb 00 05:41:45.009 READ DMA + c8 00 00 00 40 00 0b bf 00 98 62 eb 00 05:41:42.122 READ DMA + c8 00 00 00 40 00 0b bf 00 98 62 eb 00 05:41:39.236 READ DMA + +Error 1780 [19] occurred at disk power-on lifetime: 25373 hours (1057 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 0d 0c b8 d6 0d d6 ec 00 Error: UNC at LBA = 0xd0cbcd60dd6 = 14348358913494 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.886 READ DMA + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.567 READ DMA + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.314 READ DMA + c8 00 00 01 00 00 0b 8a 00 8c 22 eb 00 08:21:18.985 READ DMA + c8 00 00 01 00 00 0b 89 00 8c 22 eb 00 08:21:18.743 READ DMA + +Error 1779 [18] occurred at disk power-on lifetime: 25373 hours (1057 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 0d 0c b8 d6 0d d6 ec 00 Error: UNC at LBA = 0xd0cbcd60dd6 = 14348358913494 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.886 READ DMA + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.567 READ DMA + c8 00 00 01 00 00 0b 8a 00 8c 22 eb 00 08:21:19.314 READ DMA + c8 00 00 01 00 00 0b 89 00 8c 22 eb 00 08:21:18.985 READ DMA + c8 00 00 01 00 00 0b 88 00 8c 22 eb 00 08:21:18.743 READ DMA + +Error 1778 [17] occurred at disk power-on lifetime: 25373 hours (1057 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 8c 0c b8 d6 0d d6 ec 00 Error: UNC at LBA = 0x8c0cbcd60dd6 = 153986335641046 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 80 00 0c b8 00 0d 80 ec 00 08:21:19.886 READ DMA + c8 00 00 01 00 00 0b 8a 00 8c 22 eb 00 08:21:19.567 READ DMA + c8 00 00 01 00 00 0b 89 00 8c 22 eb 00 08:21:19.314 READ DMA + c8 00 00 01 00 00 0b 88 00 8c 22 eb 00 08:21:18.985 READ DMA + c8 00 00 01 00 00 0b 87 00 8c 22 eb 00 08:21:18.743 READ DMA + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 31611 - +# 2 Short offline Completed without error 00% 31443 - +# 3 Short offline Completed without error 00% 31346 - +# 4 Short offline Completed without error 00% 31178 - +# 5 Short offline Completed without error 00% 31010 - +# 6 Short offline Completed without error 00% 30842 - +# 7 Short offline Completed without error 00% 30674 - +# 8 Short offline Completed without error 00% 30507 - +# 9 Short offline Completed without error 00% 30339 - +#10 Short offline Completed without error 00% 30171 - +#11 Short offline Completed without error 00% 30003 - +#12 Short offline Completed without error 00% 29835 - +#13 Short offline Completed without error 00% 29667 - +#14 Short offline Completed without error 00% 29499 - +#15 Short offline Completed without error 00% 29331 - +#16 Short offline Completed without error 00% 29163 - +#17 Short offline Completed without error 00% 28995 - +#18 Short offline Completed without error 00% 28828 - +#19 Short offline Completed without error 00% 31754 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/HDD/Seagate/ST320/ST320LT007-9ZV142/21267165E5FE b/HDD/Seagate/ST320/ST320LT007-9ZV142/21267165E5FE new file mode 100644 index 000000000..3586354f2 --- /dev/null +++ b/HDD/Seagate/ST320/ST320LT007-9ZV142/21267165E5FE @@ -0,0 +1,180 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus Thin +Device Model: ST320LT007-9ZV142 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0004LVM1 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7242 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 30 01:13:28 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 64) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x303b) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 103 099 034 - 6220888 + 3 Spin_Up_Time PO---- 099 098 000 - 0 + 4 Start_Stop_Count -O--CK 097 097 020 - 3884 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 079 060 030 - 17529619156 + 9 Power_On_Hours -O--CK 082 082 000 - 16536 (46 37 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 097 097 020 - 3433 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 5 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 065 052 045 - 35 (Min/Max 34/46) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 40 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 2 +193 Load_Cycle_Count -O--CK 072 072 000 - 57064 +194 Temperature_Celsius -O---K 035 048 000 - 35 (0 13 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 057 045 000 - 6220888 +196 Reallocated_Event_Count POSR-- 089 089 030 - 9786 (53130 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +250 Read_Error_Retry_Rate ------ 100 001 000 - 9 +251 Unknown_Attribute ------ 100 001 000 - 2 +252 Unknown_Attribute ------ 100 001 000 - 0 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xbd GPL VS 1 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0x50) Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 35/46 Celsius +Lifetime Min/Max Temperature: 13/48 Celsius +Under/Over Temperature Limit Count: 0/9 +Vendor specific: +00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 11 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (103) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST320/ST320LT007-9ZV142/81385BFFDE7E b/HDD/Seagate/ST320/ST320LT007-9ZV142/81385BFFDE7E new file mode 100644 index 000000000..5629c7904 --- /dev/null +++ b/HDD/Seagate/ST320/ST320LT007-9ZV142/81385BFFDE7E @@ -0,0 +1,182 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus Thin +Device Model: ST320LT007-9ZV142 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0004LVM1 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7242 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Aug 25 22:29:13 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 69) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x303b) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 034 - 147865864 + 3 Spin_Up_Time PO---- 099 098 000 - 0 + 4 Start_Stop_Count -O--CK 098 098 020 - 2775 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 076 060 030 - 13004532069 + 9 Power_On_Hours -O--CK 089 089 000 - 10148 (85 7 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1640 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 098 000 - 122 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 064 051 045 - 36 (Min/Max 30/42) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 34 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 69 +193 Load_Cycle_Count -O--CK 026 026 000 - 148307 +194 Temperature_Celsius -O---K 036 049 000 - 36 (255 246 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 051 042 000 - 147865864 +196 Reallocated_Event_Count POSR-- 094 094 030 - 5717 (33680 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +250 Read_Error_Retry_Rate ------ 001 001 000 - 217254 +251 Unknown_Attribute ------ 100 001 000 - 6414 +252 Unknown_Attribute ------ 100 001 000 - 0 +254 Free_Fall_Sensor -O--CK 001 001 000 - 2 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xbd GPL VS 1 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 90% 6046 - +# 2 Short offline Completed without error 00% 2991 - +# 3 Short offline Completed without error 00% 2991 - +# 4 Short offline Completed without error 00% 2991 - +# 5 Vendor (0x50) Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 30/42 Celsius +Lifetime Min/Max Temperature: -10/49 Celsius +Under/Over Temperature Limit Count: 0/261 +Vendor specific: +00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 11 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (65) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3200/ST32000645NS/1FA14AB93712 b/HDD/Seagate/ST3200/ST32000645NS/1FA14AB93712 new file mode 100644 index 000000000..637e3b42e --- /dev/null +++ b/HDD/Seagate/ST3200/ST32000645NS/1FA14AB93712 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Constellation ES.2 (SATA 6Gb/s) +Device Model: ST32000645NS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0004 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 30 10:52:52 2020 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 609) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 295) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x10bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 063 044 - 123249952 + 3 Spin_Up_Time PO---- 092 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 73 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 071 060 030 - 43110800712 + 9 Power_On_Hours -O--CK 026 026 000 - 65126 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 73 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 064 056 045 - 36 (Min/Max 31/41) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 41 +193 Load_Cycle_Count -O--CK 100 100 000 - 73 +194 Temperature_Celsius -O---K 036 044 000 - 36 (0 19 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 021 004 000 - 123249952 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL,SL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 55293 - +# 2 Short offline Completed without error 00% 51405 - +# 3 Extended offline Completed without error 00% 47878 - +# 4 Short offline Completed without error 00% 42187 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 31/41 Celsius +Lifetime Min/Max Temperature: 18/45 Celsius +Under/Over Temperature Limit Count: 0/5751 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (120) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3204/ST320410A/E468CA6CAFB8 b/HDD/Seagate/ST3204/ST320410A/E468CA6CAFB8 new file mode 100644 index 000000000..1a88ffa1f --- /dev/null +++ b/HDD/Seagate/ST3204/ST320410A/E468CA6CAFB8 @@ -0,0 +1,146 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE-p11 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate U6 +Device Model: ST320410A +Serial Number: -- +Firmware Version: 3.39 +User Capacity: 20,020,396,032 bytes [20.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-6 (minor revision not indicated) +Local Time is: Thu Aug 6 09:23:26 2020 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 128 +APM level is: 64 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 420) seconds. +Offline data collection +capabilities: (0x1d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 42) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 062 052 025 - 182602739 + 3 Spin_Up_Time PO---- 098 098 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 784 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 2 + 7 Seek_Error_Rate POSR-- 077 060 030 - 61036697775 + 9 Power_On_Hours -O--CK 030 030 000 - 61916 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 098 098 020 - 2229 +194 Temperature_Celsius -O---K 031 054 000 - 31 +195 Hardware_ECC_Recovered -O-RC- 100 253 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory not supported + +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x80-0x9f SL R/W 16 Host vendor specific log +0xa0 SL VS 1 Device vendor specific log +0xa1 SL VS 20 Device vendor specific log +0xa2 SL VS 101 Device vendor specific log +0xa8 SL VS 20 Device vendor specific log +0xa9 SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +ATA Error Count: 1 + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 occurred at disk power-on lifetime: 75 hours (3 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 00 51 20 71 17 8d eb Error: 32 sectors at LBA = 0x0b8d1771 = 193795953 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 ff 20 b1 10 2d e0 00 00:00:00.021 READ DMA + c8 ff 01 4b ee 6d e0 00 00:00:01.261 READ DMA + c8 ff 01 5f 66 00 e0 00 00:00:12.631 READ DMA + c8 ff 03 5f f0 18 e0 00 00:00:00.020 READ DMA + c8 ff 03 29 b9 01 e0 00 00:00:00.027 READ DMA + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/HDD/Seagate/ST3250/ST3250310AS/19698048E88D b/HDD/Seagate/ST3250/ST3250310AS/19698048E88D new file mode 100644 index 000000000..1f783dd59 --- /dev/null +++ b/HDD/Seagate/ST3250/ST3250310AS/19698048E88D @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.10 +Device Model: ST3250310AS +Serial Number: -- +Firmware Version: 3.ADA +User Capacity: 250,000,000,000 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Sat Jul 4 14:09:25 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0xffff (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 64) minutes. +SCT capabilities: (0x8035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 084 006 - 179305366 + 3 Spin_Up_Time PO---- 097 097 070 - 0 + 4 Start_Stop_Count -O--CK 096 096 020 - 4951 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 087 060 030 - 530139744 + 9 Power_On_Hours -O--CK 076 076 000 - 21162 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 097 097 020 - 4071 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 070 034 045 Past 30 (Min/Max 27/30) +194 Temperature_Celsius -O---K 030 066 000 - 30 (0 11 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 091 051 000 - 174624423 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 1 Device vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL,SL VS 101 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer +0xff GPL - 23040 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1584 - +# 2 Extended offline Aborted by host 90% 1583 - +# 3 Extended offline Aborted by host 90% 1583 - +# 4 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 521 (0x0209) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: --/30 Celsius +Lifetime Min/Max Temperature: --/66 Celsius + +Another SCT command is executing, abort Read Data Table +(SCT ext_status_code 0xffff, action_code=4, function_code=2) +Read SCT Temperature History failed + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x8002 2 0 Vendor specific +0x8003 2 2 Vendor specific +0x8004 2 0 Vendor specific + diff --git a/HDD/Seagate/ST3250/ST3250312AS/1C5C5C77D48A b/HDD/Seagate/ST3250/ST3250312AS/1C5C5C77D48A new file mode 100644 index 000000000..928ead64c --- /dev/null +++ b/HDD/Seagate/ST3250/ST3250312AS/1C5C5C77D48A @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST3250312AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: JC47 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:14:01 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 617) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 46) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 193746617 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1521 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 078 060 030 - 71458842 + 9 Power_On_Hours -O--CK 071 071 000 - 26121 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 329 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 066 046 045 - 34 (Min/Max 30/36) +194 Temperature_Celsius -O---K 034 054 000 - 34 (0 12 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 046 034 000 - 193746617 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 22135 (193 228 0) +241 Total_LBAs_Written ------ 100 253 000 - 985866387 +242 Total_LBAs_Read ------ 100 253 000 - 2266116006 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 23014 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 30/36 Celsius +Lifetime Min/Max Temperature: 12/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (33) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3250/ST3250410AS/2C4876420B18 b/HDD/Seagate/ST3250/ST3250410AS/2C4876420B18 new file mode 100644 index 000000000..e5ce34757 --- /dev/null +++ b/HDD/Seagate/ST3250/ST3250410AS/2C4876420B18 @@ -0,0 +1,173 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.10 +Device Model: ST3250410AS +Serial Number: -- +Firmware Version: 3.AAC +User Capacity: 250,055,122,432 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Wed Jul 15 14:11:34 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 64) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 116 091 006 - 113771644 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 098 098 020 - 2751 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 087 060 030 - 577329377 + 9 Power_On_Hours -O--CK 088 088 000 - 10995 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 098 098 020 - 2663 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 074 050 045 - 26 (Min/Max 24/26) +194 Temperature_Celsius -O---K 026 050 000 - 26 (0 9 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 105 058 000 - 239452759 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 1 Device vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL,SL VS 101 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer +0xff GPL - 23040 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 10967 - +# 2 Short offline Completed without error 00% 10964 - +# 3 Short offline Completed without error 00% 10958 - +# 4 Short offline Completed without error 00% 10949 - +# 5 Short offline Completed without error 00% 10942 - +# 6 Short offline Completed without error 00% 10939 - +# 7 Short offline Completed without error 00% 10939 - +# 8 Short offline Completed without error 00% 10936 - +# 9 Short offline Completed without error 00% 10935 - +#10 Short offline Completed without error 00% 10923 - +#11 Short offline Completed without error 00% 10917 - +#12 Short offline Completed without error 00% 10900 - +#13 Short offline Completed without error 00% 10879 - +#14 Short offline Completed without error 00% 10864 - +#15 Short offline Completed without error 00% 10817 - +#16 Short offline Completed without error 00% 10777 - +#17 Short offline Completed without error 00% 10700 - +#18 Short offline Completed without error 00% 10637 - +#19 Short offline Completed without error 00% 10628 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 521 (0x0209) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x8002 2 0 Vendor specific +0x8003 2 2 Vendor specific +0x8004 2 0 Vendor specific + diff --git a/HDD/Seagate/ST3250/ST3250820AS/FB7732FC65D5 b/HDD/Seagate/ST3250/ST3250820AS/FB7732FC65D5 new file mode 100644 index 000000000..6d3dde1c4 --- /dev/null +++ b/HDD/Seagate/ST3250/ST3250820AS/FB7732FC65D5 @@ -0,0 +1,306 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.10 +Device Model: ST3250820AS +Serial Number: -- +Firmware Version: 3.AAD +User Capacity: 250,058,268,160 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Fri Jul 17 22:23:09 2020 AST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 92) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 116 088 006 - 108908176 + 3 Spin_Up_Time PO---- 096 095 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1084 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 7 + 7 Seek_Error_Rate POSR-- 083 060 030 - 230016207 + 9 Power_On_Hours -O--CK 090 090 000 - 9412 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1171 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 047 045 - 39 (Min/Max 30/43) +194 Temperature_Celsius -O---K 039 053 000 - 39 (0 22 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 057 051 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 33 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 1 Device vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL,SL VS 101 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer +0xff GPL - 23040 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 303 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 303 [2] occurred at disk power-on lifetime: 7011 hours (292 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 01 01 00 00 00 00 00 00 ed 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:21:38.186 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:21:38.127 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:21:37.911 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 01 01 00 1d 51 00 1c 2e e0 00 00:21:37.846 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:21:35.766 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 302 [1] occurred at disk power-on lifetime: 7011 hours (292 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 01 01 00 00 00 00 00 00 ed 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:21:32.899 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:21:32.899 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:21:32.899 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 00:21:32.899 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:21:35.766 READ MULTIPLE EXT + +Error 301 [0] occurred at disk power-on lifetime: 6760 hours (281 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 0f 00 00 00 00 00 00 40 00 Error: ICRC, ABRT 15 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 ff 00 20 00 0b a9 00 dc 8d 40 00 00:47:51.552 READ DMA EXT + 25 00 ff 00 20 00 0b aa 00 dc bd 40 00 00:47:51.505 READ DMA EXT + 25 00 ff 00 20 00 0b aa 00 dc dd 40 00 00:47:51.456 READ DMA EXT + 25 00 ff 00 20 00 0b ab 00 dc 6d 40 00 00:47:51.435 READ DMA EXT + 25 00 ff 00 20 00 0b ab 00 dc 8d 40 00 00:47:51.664 READ DMA EXT + +Error 300 [19] occurred at disk power-on lifetime: 6474 hours (269 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 01 01 00 00 00 00 00 00 ed 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 01:52:06.130 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 01:52:06.130 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 01:52:06.130 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 01:52:09.651 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 01:52:09.592 READ MULTIPLE EXT + +Error 299 [18] occurred at disk power-on lifetime: 7011 hours (292 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 01 01 00 00 00 00 00 00 ed 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:21:38.186 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:21:38.127 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:21:37.911 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 01 01 00 1d 51 00 1c 2e e0 00 00:21:37.846 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:21:35.766 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 298 [17] occurred at disk power-on lifetime: 7011 hours (292 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 01 01 00 00 00 00 00 00 ed 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 00:21:32.899 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 00:21:32.899 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 00:21:32.899 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 00:21:32.899 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:21:35.766 READ MULTIPLE EXT + +Error 297 [16] occurred at disk power-on lifetime: 6760 hours (281 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 0f 00 00 00 00 00 00 40 00 Error: ICRC, ABRT 15 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 ff 00 20 00 0b a9 00 dc 8d 40 00 00:47:51.552 READ DMA EXT + 25 00 ff 00 20 00 0b aa 00 dc bd 40 00 00:47:51.505 READ DMA EXT + 25 00 ff 00 20 00 0b aa 00 dc dd 40 00 00:47:51.456 READ DMA EXT + 25 00 ff 00 20 00 0b ab 00 dc 6d 40 00 00:47:51.435 READ DMA EXT + 25 00 ff 00 20 00 0b ab 00 dc 8d 40 00 00:47:51.664 READ DMA EXT + +Error 296 [15] occurred at disk power-on lifetime: 6474 hours (269 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 01 01 00 00 00 00 00 00 ed 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 37 00 ff 01 01 00 1d 51 00 1c 2e ed 00 01:52:06.130 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 00 00 00 1d 51 00 1c 2e e0 00 01:52:06.130 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 37 00 ff 00 00 00 1d 51 00 1c 2e ed 00 01:52:06.130 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 27 00 ff 00 01 00 1d 59 00 1c 6f e0 00 01:52:09.651 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 01:52:09.592 READ MULTIPLE EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 9408 - +# 2 Extended offline Interrupted (host reset) 90% 9405 - +# 3 Extended offline Interrupted (host reset) 90% 9404 - +# 4 Extended offline Completed without error 00% 8660 - +# 5 Short offline Interrupted (host reset) 90% 8640 - +# 6 Extended offline Interrupted (host reset) 90% 8640 - +# 7 Extended offline Interrupted (host reset) 90% 8534 - +# 8 Extended offline Interrupted (host reset) 90% 8462 - +# 9 Extended offline Interrupted (host reset) 90% 8433 - +#10 Short offline Interrupted (host reset) 90% 8431 - +#11 Extended offline Interrupted (host reset) 90% 8430 - +#12 Extended offline Interrupted (host reset) 90% 8427 - +#13 Extended offline Interrupted (host reset) 70% 8224 - +#14 Extended offline Completed without error 00% 7016 - +#15 Extended offline Aborted by host 40% 7016 - +#16 Short offline Completed without error 00% 7016 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x0001 2 1 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 1 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3300/ST33000651AS/E1AD4579EF64 b/HDD/Seagate/ST3300/ST33000651AS/E1AD4579EF64 new file mode 100644 index 000000000..81c880481 --- /dev/null +++ b/HDD/Seagate/ST3300/ST33000651AS/E1AD4579EF64 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda XT +Device Model: ST33000651AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC44 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 12:06:13 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 609) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 449) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 111 099 006 - 35261569 + 3 Spin_Up_Time PO---- 089 078 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 62 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 085 060 030 - 379767030 + 9 Power_On_Hours -O--CK 058 058 000 - 36949 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 55 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 4295032833 +189 High_Fly_Writes -O-RCK 098 098 000 - 2 +190 Airflow_Temperature_Cel -O---K 060 048 045 - 40 (Min/Max 22/52) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 41 +193 Load_Cycle_Count -O--CK 100 100 000 - 62 +194 Temperature_Celsius -O---K 040 052 000 - 40 (0 18 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 020 004 000 - 35261569 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 36949 (226 37 0) +241 Total_LBAs_Written ------ 100 253 000 - 80789410 +242 Total_LBAs_Read ------ 100 253 000 - 1030919763 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 5067 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 22/52 Celsius +Lifetime Min/Max Temperature: 18/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3320/ST3320418AS/15E455FB3EF1 b/HDD/Seagate/ST3320/ST3320418AS/15E455FB3EF1 new file mode 100644 index 000000000..f9e366cbd --- /dev/null +++ b/HDD/Seagate/ST3320/ST3320418AS/15E455FB3EF1 @@ -0,0 +1,203 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST3320418AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC49 +User Capacity: 320,071,851,520 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sat Jul 25 21:15:51 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 625) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 64) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 101 093 006 Pre-fail Always - 189451338 + 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1353 + 5 Reallocated_Sector_Ct 0x0033 051 051 036 Pre-fail Always - 2028 + 7 Seek_Error_Rate 0x000f 035 035 030 Pre-fail Always - 3929898452312 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 850 + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 733 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 061 061 000 Old_age Always - 39 +188 Command_Timeout 0x0032 100 095 000 Old_age Always - 68720591263 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 067 050 045 Old_age Always - 33 (Min/Max 29/33) +194 Temperature_Celsius 0x0022 033 050 000 Old_age Always - 33 (0 9 0 0 0) +195 Hardware_ECC_Recovered 0x001a 037 027 000 Old_age Always - 189451338 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 20 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 20 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1845 (9 197 0) +241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2167561390 +242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2052290758 + +SMART Error Log Version: 1 +ATA Error Count: 31 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 31 occurred at disk power-on lifetime: 850 hours (35 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 13 7a b9 02 Error: WP at LBA = 0x02b97a13 = 45709843 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 61 00 20 70 44 cd 42 00 00:07:55.213 WRITE FPDMA QUEUED + 60 00 80 10 7a b9 42 00 00:07:55.212 READ FPDMA QUEUED + 60 00 20 f0 79 b9 42 00 00:07:55.212 READ FPDMA QUEUED + 61 00 20 70 9e ca 42 00 00:07:55.211 WRITE FPDMA QUEUED + 61 00 08 10 36 cd 42 00 00:07:55.210 WRITE FPDMA QUEUED + +Error 30 occurred at disk power-on lifetime: 843 hours (35 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 91 cc 26 00 Error: UNC at LBA = 0x0026cc91 = 2542737 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 00 08 e0 cb 26 e0 00 00:00:08.680 READ DMA EXT + 25 00 08 88 cb 26 e0 00 00:00:08.677 READ DMA EXT + 25 00 08 f8 6d 26 e0 00 00:00:08.658 READ DMA EXT + 25 00 08 58 b8 26 e0 00 00:00:08.647 READ DMA EXT + 25 00 08 80 4f 00 e0 00 00:00:08.646 READ DMA EXT + +Error 29 occurred at disk power-on lifetime: 836 hours (34 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 bd d6 2c 04 Error: UNC at LBA = 0x042cd6bd = 70047421 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 60 00 78 a0 12 2b 44 00 00:24:17.244 READ FPDMA QUEUED + 60 00 78 28 12 2b 44 00 00:24:17.037 READ FPDMA QUEUED + 60 00 78 b0 11 2b 44 00 00:24:17.036 READ FPDMA QUEUED + 60 00 78 60 07 2b 44 00 00:24:17.006 READ FPDMA QUEUED + 60 00 78 28 ee 21 44 00 00:24:12.923 READ FPDMA QUEUED + +Error 28 occurred at disk power-on lifetime: 828 hours (34 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 81 87 3e 00 Error: UNC at LBA = 0x003e8781 = 4097921 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 60 00 08 80 87 3e 40 00 00:01:46.749 READ FPDMA QUEUED + 60 00 08 00 88 3e 40 00 00:01:46.749 READ FPDMA QUEUED + 60 00 08 f0 87 5e 40 00 00:01:46.666 READ FPDMA QUEUED + 60 00 08 80 87 5e 40 00 00:01:45.865 READ FPDMA QUEUED + 60 00 08 00 10 00 40 00 00:01:45.858 READ FPDMA QUEUED + +Error 27 occurred at disk power-on lifetime: 820 hours (34 days + 4 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 c9 de 7b 00 Error: UNC at LBA = 0x007bdec9 = 8117961 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 60 00 00 00 af 7b 40 00 00:05:56.593 READ FPDMA QUEUED + 60 00 00 00 ae 7b 40 00 00:05:56.483 READ FPDMA QUEUED + 60 00 00 00 6a 7b 40 00 00:05:53.080 READ FPDMA QUEUED + 60 00 00 00 69 7b 40 00 00:05:52.946 READ FPDMA QUEUED + 60 00 00 00 0a 78 40 00 00:05:47.393 READ FPDMA QUEUED + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST3320/ST3320620NS/A2299E3D53E9 b/HDD/Seagate/ST3320/ST3320620NS/A2299E3D53E9 new file mode 100644 index 000000000..b91904e1a --- /dev/null +++ b/HDD/Seagate/ST3320/ST3320620NS/A2299E3D53E9 @@ -0,0 +1,312 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda ES +Device Model: ST3320620NS +Serial Number: -- +Firmware Version: 3.AEK +User Capacity: 320,071,851,520 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Thu Jul 16 11:02:44 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Unexpected SCT status 0xffff (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 107) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 108 090 006 - 20809745 + 3 Spin_Up_Time PO---- 096 095 000 - 0 + 4 Start_Stop_Count -O--CK 096 096 020 - 4473 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 + 7 Seek_Error_Rate POSR-- 066 045 030 - 3799633 + 9 Power_On_Hours -O--CK 044 044 000 - 49829 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 097 097 020 - 4093 +187 Reported_Uncorrect -O--CK 099 099 000 - 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 053 038 045 Past 47 (Min/Max 24/47) +194 Temperature_Celsius -O---K 047 062 000 - 47 (0 14 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 064 056 000 - 215119242 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 197 000 - 707 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 1 Device vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL,SL VS 101 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer +0xff GPL - 23040 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 1095 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1095 [14] occurred at disk power-on lifetime: 47541 hours (1980 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 1f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 31 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 05 1e 00 2c 08 e0 00 06:26:26.765 READ DMA EXT + 25 00 00 01 00 00 05 1d 00 2c 08 e0 00 06:26:26.788 READ DMA EXT + 25 00 00 01 00 00 05 1c 00 2c 08 e0 00 06:26:26.786 READ DMA EXT + 25 00 00 01 00 00 05 1b 00 2c 08 e0 00 06:26:26.784 READ DMA EXT + 25 00 00 01 00 00 05 1a 00 2c 08 e0 00 06:26:26.782 READ DMA EXT + +Error 1094 [13] occurred at disk power-on lifetime: 47541 hours (1980 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 df 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 223 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 0c 71 00 a0 e0 e0 00 06:26:00.478 READ DMA EXT + 25 00 00 01 00 00 0c 70 00 a0 e0 e0 00 06:26:00.477 READ DMA EXT + 25 00 00 01 00 00 0c 6f 00 a0 e0 e0 00 06:26:00.501 READ DMA EXT + 25 00 00 01 00 00 0c 6e 00 a0 e0 e0 00 06:26:00.499 READ DMA EXT + 25 00 00 01 00 00 0c 6d 00 a0 e0 e0 00 06:26:00.497 READ DMA EXT + +Error 1093 [12] occurred at disk power-on lifetime: 47541 hours (1980 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 df 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 223 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 05 79 00 27 20 e0 00 06:25:31.452 READ DMA EXT + 25 00 00 01 00 00 05 78 00 27 20 e0 00 06:25:31.474 READ DMA EXT + 25 00 00 01 00 00 05 77 00 27 20 e0 00 06:25:31.472 READ DMA EXT + 25 00 00 01 00 00 05 76 00 27 20 e0 00 06:25:31.471 READ DMA EXT + 25 00 00 01 00 00 05 75 00 27 20 e0 00 06:25:31.468 READ DMA EXT + +Error 1092 [11] occurred at disk power-on lifetime: 47542 hours (1980 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 7f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 127 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 0c c5 00 b9 48 e0 00 06:27:00.479 READ DMA EXT + 25 00 00 01 00 00 0c c4 00 b9 48 e0 00 06:27:00.478 READ DMA EXT + 25 00 00 01 00 00 0c c3 00 b9 48 e0 00 06:27:00.476 READ DMA EXT + 25 00 00 01 00 00 0c c2 00 b9 48 e0 00 06:27:00.475 READ DMA EXT + 25 00 00 01 00 00 0c c1 00 b9 48 e0 00 06:27:00.472 READ DMA EXT + +Error 1091 [10] occurred at disk power-on lifetime: 47541 hours (1980 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 1f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 31 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 05 1e 00 2c 08 e0 00 06:26:26.765 READ DMA EXT + 25 00 00 01 00 00 05 1d 00 2c 08 e0 00 06:26:26.788 READ DMA EXT + 25 00 00 01 00 00 05 1c 00 2c 08 e0 00 06:26:26.786 READ DMA EXT + 25 00 00 01 00 00 05 1b 00 2c 08 e0 00 06:26:26.784 READ DMA EXT + 25 00 00 01 00 00 05 1a 00 2c 08 e0 00 06:26:26.782 READ DMA EXT + +Error 1090 [9] occurred at disk power-on lifetime: 47541 hours (1980 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 df 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 223 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 0c 71 00 a0 e0 e0 00 06:26:00.478 READ DMA EXT + 25 00 00 01 00 00 0c 70 00 a0 e0 e0 00 06:26:00.477 READ DMA EXT + 25 00 00 01 00 00 0c 6f 00 a0 e0 e0 00 06:26:00.501 READ DMA EXT + 25 00 00 01 00 00 0c 6e 00 a0 e0 e0 00 06:26:00.499 READ DMA EXT + 25 00 00 01 00 00 0c 6d 00 a0 e0 e0 00 06:26:00.497 READ DMA EXT + +Error 1089 [8] occurred at disk power-on lifetime: 47541 hours (1980 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 df 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 223 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 05 79 00 27 20 e0 00 06:25:31.452 READ DMA EXT + 25 00 00 01 00 00 05 78 00 27 20 e0 00 06:25:31.474 READ DMA EXT + 25 00 00 01 00 00 05 77 00 27 20 e0 00 06:25:31.472 READ DMA EXT + 25 00 00 01 00 00 05 76 00 27 20 e0 00 06:25:31.471 READ DMA EXT + 25 00 00 01 00 00 05 75 00 27 20 e0 00 06:25:31.468 READ DMA EXT + +Error 1088 [7] occurred at disk power-on lifetime: 47542 hours (1980 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 7f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 127 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 0c c5 00 b9 48 e0 00 06:27:00.479 READ DMA EXT + 25 00 00 01 00 00 0c c4 00 b9 48 e0 00 06:27:00.478 READ DMA EXT + 25 00 00 01 00 00 0c c3 00 b9 48 e0 00 06:27:00.476 READ DMA EXT + 25 00 00 01 00 00 0c c2 00 b9 48 e0 00 06:27:00.475 READ DMA EXT + 25 00 00 01 00 00 0c c1 00 b9 48 e0 00 06:27:00.472 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 44824 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 521 (0x0209) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: --/48 Celsius +Lifetime Min/Max Temperature: --/63 Celsius + +Another SCT command is executing, abort Read Data Table +(SCT ext_status_code 0xffff, action_code=4, function_code=2) +Read SCT Temperature History failed + +Another SCT command is executing, abort Error Recovery Control +(SCT ext_status_code 0xffff, action_code=4, function_code=2) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3500/ST3500312CS/226C7864E7E9 b/HDD/Seagate/ST3500/ST3500312CS/226C7864E7E9 new file mode 100644 index 000000000..e2c4e710a --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500312CS/226C7864E7E9 @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Pipeline HD 5900.2 +Device Model: ST3500312CS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SS16 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5900 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Aug 2 13:10:50 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 192 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 612) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 105) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103b) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 152746734 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 044 044 020 - 57684 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 084 060 030 - 285318313 + 9 Power_On_Hours -O--CK 061 061 000 - 34224 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1824 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 12 +189 High_Fly_Writes -O-RCK 097 097 000 - 3 +190 Airflow_Temperature_Cel -O---K 068 042 045 Past 32 (0 2 32 24 0) +194 Temperature_Celsius -O---K 032 058 000 - 32 (0 13 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 054 036 000 - 152746734 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL,SL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 24/32 Celsius +Lifetime Min/Max Temperature: 13/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 2 minutes +Temperature Logging Interval: 94 minutes +Min/Max recommended Temperature: 1/61 Celsius +Min/Max Temperature Limit: 2/60 Celsius +Temperature History Size (Index): 128 (21) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3500/ST3500312CS/A1832FFC455B b/HDD/Seagate/ST3500/ST3500312CS/A1832FFC455B new file mode 100644 index 000000000..0204bfad0 --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500312CS/A1832FFC455B @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Pipeline HD 5900.2 +Device Model: ST3500312CS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CA12 +User Capacity: 499,570,991,104 bytes [499 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5900 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Jul 24 18:11:44 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 623) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 110) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103b) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 185328444 + 3 Spin_Up_Time PO---- 098 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 284 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 072 060 030 - 18003553 + 9 Power_On_Hours -O--CK 099 099 000 - 1520 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 142 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 092 000 - 308 +189 High_Fly_Writes -O-RCK 015 015 000 - 85 +190 Airflow_Temperature_Cel -O---K 065 059 045 - 35 (Min/Max 22/35) +194 Temperature_Celsius -O---K 035 041 000 - 35 (0 17 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 051 042 000 - 185328444 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 449 - +# 2 Short offline Completed without error 00% 447 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 22/35 Celsius +Lifetime Min/Max Temperature: 17/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 2 minutes +Temperature Logging Interval: 94 minutes +Min/Max recommended Temperature: 1/61 Celsius +Min/Max Temperature Limit: 2/60 Celsius +Temperature History Size (Index): 128 (59) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 54 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3500/ST3500320NS/C87D6F9246D5 b/HDD/Seagate/ST3500/ST3500320NS/C87D6F9246D5 new file mode 100644 index 000000000..675d1a8bf --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500320NS/C87D6F9246D5 @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda ES.2 +Device Model: ST3500320NS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SN06 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Aug 19 14:11:12 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 642) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 117) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 082 063 044 - 199988332 + 3 Spin_Up_Time PO---- 099 095 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 174 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 049 048 030 - 4458261496906 + 9 Power_On_Hours -O--CK 064 064 000 - 31791 + 10 Spin_Retry_Count PO--C- 100 100 097 - 7 + 12 Power_Cycle_Count -O--CK 100 037 020 - 146 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 080 000 - 131105 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 064 055 045 - 36 (Min/Max 24/36) +194 Temperature_Celsius -O---K 036 045 000 - 36 (0 12 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 028 026 000 - 199988332 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 152 000 - 146 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xb6 GPL VS 1918 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 22561 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 24/36 Celsius +Lifetime Min/Max Temperature: 11/45 Celsius +Under/Over Temperature Limit Count: 0/771 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (6) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3500/ST3500412AS/0F99F3714E3D b/HDD/Seagate/ST3500/ST3500412AS/0F99F3714E3D new file mode 100644 index 000000000..d05c0b450 --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500412AS/0F99F3714E3D @@ -0,0 +1,190 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda LP +Device Model: ST3500412AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC32 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5900 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sun Aug 2 00:20:47 2020 BST + +==> WARNING: A firmware update for this drive may be available, +see the following Seagate web pages: +http://knowledge.seagate.com/articles/en_US/FAQ/207931en +http://knowledge.seagate.com/articles/en_US/FAQ/213915en + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 0 (vendor specific), recommended: 254 +APM level is: 192 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 623) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 107) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 176405971 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 095 095 020 - 6044 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 085 060 030 - 379848856 + 9 Power_On_Hours -O--CK 059 059 000 - 35983 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 098 098 020 - 2646 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 4295032833 +189 High_Fly_Writes -O-RCK 070 070 000 - 30 +190 Airflow_Temperature_Cel -O---K 066 042 045 Past 34 (Min/Max 29/40 #238) +194 Temperature_Celsius -O---K 034 058 000 - 34 (0 10 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 049 024 000 - 176405971 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 23447 (52 160 0) +241 Total_LBAs_Written ------ 100 253 000 - 3723704444 +242 Total_LBAs_Read ------ 100 253 000 - 3988628852 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL,SL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 34724 - +# 2 Short offline Interrupted (host reset) 60% 33792 - +# 3 Short offline Interrupted (host reset) 20% 28253 - +# 4 Short offline Completed without error 00% 28253 - +# 5 Short offline Interrupted (host reset) 00% 28253 - +# 6 Short offline Interrupted (host reset) 20% 28253 - +# 7 Short offline Completed without error 00% 28253 - +# 8 Short offline Interrupted (host reset) 90% 28253 - +# 9 Short offline Interrupted (host reset) 90% 28253 - +#10 Short offline Interrupted (host reset) 80% 28222 - +#11 Short offline Interrupted (host reset) 70% 28221 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 29/40 Celsius +Lifetime Min/Max Temperature: 10/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (8) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3500/ST3500413AS/4E333F6E6393 b/HDD/Seagate/ST3500/ST3500413AS/4E333F6E6393 new file mode 100644 index 000000000..feab3f198 --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500413AS/4E333F6E6393 @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST3500413AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: JC66 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 23:20:34 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 79) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 165435059 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 47 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 078 060 030 - 66901299 + 9 Power_On_Hours -O--CK 096 096 000 - 4310 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 27 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 057 048 045 - 43 (Min/Max 39/46) +194 Temperature_Celsius -O---K 043 052 000 - 43 (0 14 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 036 021 000 - 165435059 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 4193 (27 76 0) +241 Total_LBAs_Written ------ 100 253 000 - 2987165314 +242 Total_LBAs_Read ------ 100 253 000 - 2501825392 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0x50) Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 39/46 Celsius +Lifetime Min/Max Temperature: 14/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (27) + +SMART WRITE LOG does not return COUNT and LBA_LOW register +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3500/ST3500413AS/668D638D8318 b/HDD/Seagate/ST3500/ST3500413AS/668D638D8318 new file mode 100644 index 000000000..7b8b1733e --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500413AS/668D638D8318 @@ -0,0 +1,190 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST3500413AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: JC47 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 29 10:15:26 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 208 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 79) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 119 099 006 - 225848956 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 723 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 131483399 + 9 Power_On_Hours -O--CK 017 017 000 - 73250 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 665 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 098 000 - 15 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 044 045 Past 39 (Min/Max 38/42 #5) +194 Temperature_Celsius -O---K 039 056 000 - 39 (0 17 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 026 014 000 - 225848956 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 74601 (224 59 0) +241 Total_LBAs_Written ------ 100 253 000 - 1579832220 +242 Total_LBAs_Read ------ 100 253 000 - 3206634667 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 42953 - +# 2 Short offline Completed without error 00% 42929 - +# 3 Short offline Completed without error 00% 42905 - +# 4 Short offline Completed without error 00% 42881 - +# 5 Short offline Completed without error 00% 42857 - +# 6 Short offline Completed without error 00% 42833 - +# 7 Extended offline Completed without error 00% 42811 - +# 8 Short offline Completed without error 00% 42809 - +# 9 Short offline Completed without error 00% 42785 - +#10 Short offline Completed without error 00% 42761 - +#11 Short offline Completed without error 00% 42737 - +#12 Short offline Completed without error 00% 42713 - +#13 Short offline Completed without error 00% 42689 - +#14 Short offline Completed without error 00% 42665 - +#15 Extended offline Completed without error 00% 42643 - +#16 Short offline Completed without error 00% 42641 - +#17 Short offline Completed without error 00% 42617 - +#18 Short offline Completed without error 00% 42593 - +#19 Short offline Completed without error 00% 42569 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 38/42 Celsius +Lifetime Min/Max Temperature: 17/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (94) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3500/ST3500413AS/BD77620E0D08 b/HDD/Seagate/ST3500/ST3500413AS/BD77620E0D08 new file mode 100644 index 000000000..9b932f2c4 --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500413AS/BD77620E0D08 @@ -0,0 +1,342 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST3500413AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: JC47 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 29 10:15:25 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 592) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 81) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 152596972 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 098 098 020 - 2674 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 128599232 + 9 Power_On_Hours -O--CK 042 042 000 - 51068 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1858 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 096 096 099 NOW 4 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 098 000 - 8590065784 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 053 045 - 39 (Min/Max 38/42) +194 Temperature_Celsius -O---K 039 047 000 - 39 (0 13 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 032 021 000 - 152596972 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 199 000 - 90 +240 Head_Flying_Hours ------ 100 253 000 - 54325 (110 219 0) +241 Total_LBAs_Written ------ 100 253 000 - 182296568 +242 Total_LBAs_Read ------ 100 253 000 - 1932168553 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 5868 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 5868 [7] occurred at disk power-on lifetime: 20002 hours (833 days + 10 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:28:13.521 NOP [Abort queued commands] + b0 00 d4 00 00 00 00 00 c2 4f 81 40 00 00:27:53.257 SMART EXECUTE OFF-LINE IMMEDIATE + b0 00 d0 00 01 00 00 00 c2 4f 00 40 00 00:27:53.212 SMART READ DATA + ec 00 00 00 01 00 00 00 00 00 00 40 00 00:27:53.201 IDENTIFY DEVICE + b0 00 d5 00 01 00 00 00 c2 4f 09 40 00 00:26:45.692 SMART READ LOG + +Error 5867 [6] occurred at disk power-on lifetime: 19022 hours (792 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 71 00 04 00 00 00 80 87 81 e0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:19:40.828 IDENTIFY DEVICE + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:19:40.805 IDENTIFY PACKET DEVICE + ec 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:19:40.767 IDENTIFY DEVICE + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:19:40.763 IDENTIFY PACKET DEVICE + ec 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:18:36.859 IDENTIFY DEVICE + +Error 5866 [5] occurred at disk power-on lifetime: 19022 hours (792 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 71 00 04 00 00 00 80 87 81 e0 00 Device Fault; Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:19:40.805 IDENTIFY PACKET DEVICE + ec 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:19:40.767 IDENTIFY DEVICE + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:19:40.763 IDENTIFY PACKET DEVICE + ec 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:18:36.859 IDENTIFY DEVICE + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:18:36.859 IDENTIFY PACKET DEVICE + +Error 5865 [4] occurred at disk power-on lifetime: 19022 hours (792 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 71 00 04 00 00 00 80 87 81 e0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:19:40.767 IDENTIFY DEVICE + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:19:40.763 IDENTIFY PACKET DEVICE + ec 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:18:36.859 IDENTIFY DEVICE + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:18:36.859 IDENTIFY PACKET DEVICE + 00 00 00 00 00 00 00 00 00 00 00 00 ff 1d+08:18:36.828 NOP [Abort queued commands] + +Error 5864 [3] occurred at disk power-on lifetime: 19022 hours (792 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 71 00 04 00 00 00 80 87 81 e0 00 Device Fault; Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:19:40.763 IDENTIFY PACKET DEVICE + ec 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:18:36.859 IDENTIFY DEVICE + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:18:36.859 IDENTIFY PACKET DEVICE + 00 00 00 00 00 00 00 00 00 00 00 00 ff 1d+08:18:36.828 NOP [Abort queued commands] + ec 00 00 00 01 00 00 00 00 00 00 a0 00 1d+08:16:10.335 IDENTIFY DEVICE + +Error 5863 [2] occurred at disk power-on lifetime: 19022 hours (792 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 71 00 04 00 00 00 80 87 81 e0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:18:36.859 IDENTIFY DEVICE + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:18:36.859 IDENTIFY PACKET DEVICE + 00 00 00 00 00 00 00 00 00 00 00 00 ff 1d+08:18:36.828 NOP [Abort queued commands] + ec 00 00 00 01 00 00 00 00 00 00 a0 00 1d+08:16:10.335 IDENTIFY DEVICE + 00 00 00 00 00 00 00 00 00 00 00 00 ff 1d+08:16:10.321 NOP [Abort queued commands] + +Error 5862 [1] occurred at disk power-on lifetime: 19022 hours (792 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 71 00 04 00 00 00 80 87 81 e0 00 Device Fault; Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + a1 00 00 00 00 00 00 00 00 00 00 a0 00 1d+08:18:36.859 IDENTIFY PACKET DEVICE + 00 00 00 00 00 00 00 00 00 00 00 00 ff 1d+08:18:36.828 NOP [Abort queued commands] + ec 00 00 00 01 00 00 00 00 00 00 a0 00 1d+08:16:10.335 IDENTIFY DEVICE + 00 00 00 00 00 00 00 00 00 00 00 00 ff 1d+08:16:10.321 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 ff 1d+08:16:09.800 NOP [Abort queued commands] + +Error 5861 [0] occurred at disk power-on lifetime: 19022 hours (792 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 71 00 04 00 00 00 80 87 81 e0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 01 00 00 00 00 00 00 a0 00 1d+08:16:10.335 IDENTIFY DEVICE + 00 00 00 00 00 00 00 00 00 00 00 00 ff 1d+08:16:10.321 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 ff 1d+08:16:09.800 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 ff 1d+08:16:03.425 NOP [Abort queued commands] + ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:04:43.163 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 51061 - +# 2 Short offline Completed without error 00% 51036 - +# 3 Short offline Completed without error 00% 51013 - +# 4 Short offline Completed without error 00% 50989 - +# 5 Extended offline Completed without error 00% 50968 - +# 6 Short offline Completed without error 00% 50965 - +# 7 Short offline Completed without error 00% 50941 - +# 8 Short offline Completed without error 00% 50891 - +# 9 Short offline Completed without error 00% 50867 - +#10 Short offline Completed without error 00% 50843 - +#11 Short offline Completed without error 00% 50819 - +#12 Extended offline Completed without error 00% 50797 - +#13 Short offline Completed without error 00% 50795 - +#14 Short offline Completed without error 00% 50771 - +#15 Short offline Completed without error 00% 50747 - +#16 Short offline Completed without error 00% 50728 - +#17 Short offline Completed without error 00% 50704 - +#18 Short offline Completed without error 00% 50680 - +#19 Short offline Completed without error 00% 50656 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 38/42 Celsius +Lifetime Min/Max Temperature: 13/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (54) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3500/ST3500413AS/CDC0254109AB b/HDD/Seagate/ST3500/ST3500413AS/CDC0254109AB new file mode 100644 index 000000000..c190d2aaa --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500413AS/CDC0254109AB @@ -0,0 +1,241 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST3500413AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: JC45 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 26 06:24:56 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 208 (intermediate), recommended: 208 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 86) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 099 006 - 237216096 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 037 037 020 - 65535 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 085 060 030 - 345926803 + 9 Power_On_Hours -O--CK 068 068 000 - 28698 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 095 037 020 - 5946 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 097 097 000 - 3 +188 Command_Timeout -O--CK 100 094 000 - 66267 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 041 045 Past 41 (Min/Max 31/45 #3) +194 Temperature_Celsius -O---K 041 059 000 - 41 (0 12 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 042 016 000 - 237216096 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 24 +240 Head_Flying_Hours ------ 100 253 000 - 295899 (158 186 0) +241 Total_LBAs_Written ------ 100 253 000 - 3114299303 +242 Total_LBAs_Read ------ 100 253 000 - 2192273912 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] occurred at disk power-on lifetime: 16517 hours (688 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 02 63 cd 00 00 Error: UNC at LBA = 0x000263cd = 156621 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 02 00 00 00 02 63 72 e0 00 00:00:26.498 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 48 e0 00 00:00:26.497 READ DMA EXT + 25 00 00 00 02 00 00 00 02 63 70 e0 00 00:00:26.494 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 40 e0 00 00:00:26.493 READ DMA EXT + 25 00 00 00 08 00 00 00 60 50 b0 e0 00 00:00:26.488 READ DMA EXT + +Error 2 [1] occurred at disk power-on lifetime: 16517 hours (688 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 02 63 cd 00 00 Error: UNC at LBA = 0x000263cd = 156621 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 02 00 00 00 02 63 72 e0 00 00:00:29.054 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 48 e0 00 00:00:29.053 READ DMA EXT + 25 00 00 00 02 00 00 00 02 63 70 e0 00 00:00:29.042 READ DMA EXT + 25 00 00 00 08 00 00 00 60 08 40 e0 00 00:00:29.041 READ DMA EXT + 25 00 00 00 08 00 00 00 60 50 b0 e0 00 00:00:29.035 READ DMA EXT + +Error 1 [0] occurred at disk power-on lifetime: 16517 hours (688 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 02 63 cd 00 00 Error: UNC at LBA = 0x000263cd = 156621 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 3d 00 00 00 02 63 b1 e0 00 00:00:33.651 READ DMA EXT + 25 00 00 00 3d 00 00 00 02 63 74 e0 00 00:00:33.649 READ DMA EXT + 25 00 00 00 02 00 00 00 02 63 72 e0 00 00:00:33.625 READ DMA EXT + 25 00 00 00 02 00 00 00 02 63 70 e0 00 00:00:33.615 READ DMA EXT + 35 00 00 00 08 00 00 00 5b 94 08 e0 00 00:00:33.615 WRITE DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 30% 23247 - +# 2 Extended offline Completed without error 00% 21665 - +# 3 Extended offline Completed without error 00% 19568 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 31/45 Celsius +Lifetime Min/Max Temperature: 12/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (89) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3500/ST3500418AS/A8522B333FDE b/HDD/Seagate/ST3500/ST3500418AS/A8522B333FDE new file mode 100644 index 000000000..e55794621 --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500418AS/A8522B333FDE @@ -0,0 +1,178 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST3500418AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC44 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Aug 26 06:24:56 2020 CST + +==> WARNING: A firmware update for this drive may be available, +see the following Seagate web pages: +http://knowledge.seagate.com/articles/en_US/FAQ/207931en +http://knowledge.seagate.com/articles/en_US/FAQ/213891en + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 208 (intermediate), recommended: 208 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 592) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 89) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 110 099 006 - 25716805 + 3 Spin_Up_Time PO---- 097 096 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1626 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 080 060 030 - 112777597 + 9 Power_On_Hours -O--CK 086 086 000 - 12533 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1627 +183 Runtime_Bad_Block ------ 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 095 000 - 4295034721 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 055 045 - 41 (Min/Max 32/45) +194 Temperature_Celsius -O---K 041 045 000 - 41 (0 10 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 047 022 000 - 25716805 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 16881 (197 184 0) +241 Total_LBAs_Written ------ 100 253 000 - 1985684228 +242 Total_LBAs_Read ------ 100 253 000 - 555892543 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL,SL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 20% 7082 - +# 2 Extended offline Completed without error 00% 5499 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 32/45 Celsius +Lifetime Min/Max Temperature: 10/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (23) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3500/ST3500418AS/D1B6CB07457C b/HDD/Seagate/ST3500/ST3500418AS/D1B6CB07457C new file mode 100644 index 000000000..46c9beb21 --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500418AS/D1B6CB07457C @@ -0,0 +1,245 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST3500418AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC6B +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Sep 28 14:26:35 2020 BST + +==> WARNING: A firmware update for this drive may be available, +see the following Seagate web pages: +http://knowledge.seagate.com/articles/en_US/FAQ/207931en +http://knowledge.seagate.com/articles/en_US/FAQ/213891en + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 609) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 86) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 106 099 006 - 12442722 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 095 095 020 - 5290 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 085 060 030 - 376601145 + 9 Power_On_Hours -O--CK 087 087 000 - 12222 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 098 098 020 - 2646 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 098 098 000 - 2 +188 Command_Timeout -O--CK 100 099 000 - 34 +189 High_Fly_Writes -O-RCK 097 097 000 - 3 +190 Airflow_Temperature_Cel -O---K 076 054 045 - 24 (Min/Max 15/24) +194 Temperature_Celsius -O---K 024 046 000 - 24 (0 14 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 035 028 000 - 12442722 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 19268 (56 188 0) +241 Total_LBAs_Written ------ 100 253 000 - 877118016 +242 Total_LBAs_Read ------ 100 253 000 - 2379990992 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 7397 hours (308 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 2b ab 64 80 00 00 Error: UNC at LBA = 0x2bab6480 = 732652672 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 2b ab 64 80 e0 00 02:44:49.159 READ DMA EXT + 25 00 00 00 08 00 00 2b ab 64 78 e0 00 02:44:49.158 READ DMA EXT + 25 00 00 00 08 00 00 2b ab 64 70 e0 00 02:44:49.157 READ DMA EXT + 25 00 00 00 08 00 00 2b ab 64 68 e0 00 02:44:49.157 READ DMA EXT + 25 00 00 00 08 00 00 2b ab 64 60 e0 00 02:44:49.157 READ DMA EXT + +Error 1 [0] occurred at disk power-on lifetime: 7397 hours (308 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 2b ab 64 80 00 00 Error: UNC at LBA = 0x2bab6480 = 732652672 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 00 2b ab 5f 20 e0 00 02:44:45.931 READ DMA EXT + 25 00 00 01 00 00 00 2b ab 5e 20 e0 00 02:44:45.903 READ DMA EXT + 25 00 00 00 08 00 00 01 bc 74 78 e0 00 02:44:45.887 READ DMA EXT + 35 00 00 00 20 00 00 0d 64 db c0 e0 00 02:44:45.886 WRITE DMA EXT + 25 00 00 00 08 00 00 0d f3 10 10 e0 00 02:44:45.884 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8996 - +# 2 Short offline Completed without error 00% 8985 - +# 3 Short offline Completed without error 00% 8973 - +# 4 Short offline Completed without error 00% 8961 - +# 5 Short offline Completed without error 00% 8947 - +# 6 Short offline Completed without error 00% 8935 - +# 7 Short offline Completed without error 00% 8920 - +# 8 Short offline Completed without error 00% 8905 - +# 9 Short offline Completed without error 00% 8650 - +#10 Short offline Completed without error 00% 8636 - +#11 Short offline Completed without error 00% 8623 - +#12 Short offline Completed without error 00% 8611 - +#13 Short offline Completed without error 00% 8599 - +#14 Short offline Completed without error 00% 8585 - +#15 Short offline Completed without error 00% 8579 - +#16 Short offline Completed without error 00% 8568 - +#17 Short offline Completed without error 00% 8553 - +#18 Short offline Completed without error 00% 8529 - +#19 Short offline Completed without error 00% 8517 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 15/24 Celsius +Lifetime Min/Max Temperature: 14/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (85) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3500/ST3500418AS/D53F2448A059 b/HDD/Seagate/ST3500/ST3500418AS/D53F2448A059 new file mode 100644 index 000000000..a39ba83b2 --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500418AS/D53F2448A059 @@ -0,0 +1,179 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST3500418AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC38 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sat Aug 22 01:04:25 2020 IST + +==> WARNING: A firmware update for this drive may be available, +see the following Seagate web pages: +http://knowledge.seagate.com/articles/en_US/FAQ/207931en +http://knowledge.seagate.com/articles/en_US/FAQ/213891en + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 83) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 119 099 006 - 213629710 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 097 097 020 - 3362 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 078 060 030 - 69351293 + 9 Power_On_Hours -O--CK 081 081 000 - 16684 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1681 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 071 052 045 - 29 (Min/Max 22/29) +194 Temperature_Celsius -O---K 029 048 000 - 29 (0 12 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 033 020 000 - 213629710 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 20981 (54 65 0) +241 Total_LBAs_Written ------ 100 253 000 - 3978368930 +242 Total_LBAs_Read ------ 100 253 000 - 1728735099 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3393 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 22/29 Celsius +Lifetime Min/Max Temperature: 12/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (28) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3500/ST3500418AS/E46FEF0D1488 b/HDD/Seagate/ST3500/ST3500418AS/E46FEF0D1488 new file mode 100644 index 000000000..e559b0383 --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500418AS/E46FEF0D1488 @@ -0,0 +1,211 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.12 +Device Model: ST3500418AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC37 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sun Nov 1 04:49:21 2020 CST + +==> WARNING: A firmware update for this drive may be available, +see the following Seagate web pages: +http://knowledge.seagate.com/articles/en_US/FAQ/207931en +http://knowledge.seagate.com/articles/en_US/FAQ/213891en + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 254 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 180111256 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 097 097 020 - 3992 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 078 060 030 - 60694695 + 9 Power_On_Hours -O--CK 062 062 000 - 33882 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1747 +183 Runtime_Bad_Block -O--CK 099 099 000 - 1 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 097 000 - 8590197202 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 067 048 045 - 33 (Min/Max 32/38) +194 Temperature_Celsius -O---K 033 052 000 - 33 (0 10 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 023 021 000 - 180111256 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 165 000 - 7317 +240 Head_Flying_Hours ------ 100 253 000 - 38438 (44 84 0) +241 Total_LBAs_Written ------ 100 253 000 - 1455576447 +242 Total_LBAs_Read ------ 100 253 000 - 40079464 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 15321 hours (638 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 71 00 03 00 00 01 00 32 80 40 00 Device Fault; Error: ABRT at LBA = 0x01003280 = 16790144 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 04 00 00 00 f8 00 01 00 40 00 00:01:16.891 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 74 00 00 80 40 00 00:00:45.539 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 46 00 00 80 40 00 00:00:45.531 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 6d 00 00 00 40 00 00:00:45.527 WRITE FPDMA QUEUED + 61 00 00 04 00 00 00 69 00 00 00 40 00 00:00:45.478 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 25737 - +# 2 Short offline Completed without error 00% 24993 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 32/38 Celsius +Lifetime Min/Max Temperature: 10/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (64) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3500/ST3500630NS/6575C5DBA6BC b/HDD/Seagate/ST3500/ST3500630NS/6575C5DBA6BC new file mode 100644 index 000000000..d4f14f289 --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500630NS/6575C5DBA6BC @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda ES +Device Model: ST3500630NS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 3BKS +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Fri Oct 30 07:15:29 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Unexpected SCT status 0xffff (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 171) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 + 3 Spin_Up_Time PO---- 092 091 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 76 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 087 060 030 - 494753410 + 9 Power_On_Hours -O--CK 044 044 000 - 49680 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 76 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 066 050 045 - 34 (Min/Max 27/45) +194 Temperature_Celsius -O---K 034 050 000 - 34 (0 14 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 060 057 000 - 155205798 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 1 Device vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL,SL VS 101 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer +0xff GPL - 23040 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 42627 - +# 2 Short offline Completed without error 00% 40075 - +# 3 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 521 (0x0209) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: --/45 Celsius +Lifetime Min/Max Temperature: --/50 Celsius + +Another SCT command is executing, abort Read Data Table +(SCT ext_status_code 0xffff, action_code=4, function_code=2) +Read SCT Temperature History failed + +Another SCT command is executing, abort Error Recovery Control +(SCT ext_status_code 0xffff, action_code=4, function_code=2) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST3500/ST3500630NS/94466078BAAE b/HDD/Seagate/ST3500/ST3500630NS/94466078BAAE new file mode 100644 index 000000000..6d8500e95 --- /dev/null +++ b/HDD/Seagate/ST3500/ST3500630NS/94466078BAAE @@ -0,0 +1,163 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda ES +Device Model: ST3500630NS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 3BKS +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Fri Oct 30 07:15:30 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Unexpected SCT status 0xffff (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 171) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 + 3 Spin_Up_Time PO---- 092 090 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 76 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 085 060 030 - 373598544 + 9 Power_On_Hours -O--CK 044 044 000 - 49676 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 76 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 063 047 045 - 37 (Min/Max 30/48) +194 Temperature_Celsius -O---K 037 053 000 - 37 (0 14 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 061 057 000 - 234553679 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 1 Device vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL,SL VS 101 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer +0xff GPL - 23040 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 42624 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 521 (0x0209) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: --/48 Celsius +Lifetime Min/Max Temperature: --/53 Celsius + +Another SCT command is executing, abort Read Data Table +(SCT ext_status_code 0xffff, action_code=4, function_code=2) +Read SCT Temperature History failed + +Another SCT command is executing, abort Error Recovery Control +(SCT ext_status_code 0xffff, action_code=4, function_code=2) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST3750/ST3750640NS/17DD0ABA75B4 b/HDD/Seagate/ST3750/ST3750640NS/17DD0ABA75B4 new file mode 100644 index 000000000..cd592e649 --- /dev/null +++ b/HDD/Seagate/ST3750/ST3750640NS/17DD0ABA75B4 @@ -0,0 +1,93 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda ES +Device Model: ST3750640NS +Serial Number: -- +Firmware Version: 3.AEG +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Tue Oct 20 20:39:04 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 202) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 114 085 006 Pre-fail Always - 77579245 + 3 Spin_Up_Time 0x0003 095 093 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 185 + 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 3 + 7 Seek_Error_Rate 0x000f 090 060 030 Pre-fail Always - 980980744 + 9 Power_On_Hours 0x0032 044 044 000 Old_age Always - 49559 + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 213 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 065 047 045 Old_age Always - 35 (Min/Max 34/36) +194 Temperature_Celsius 0x0022 035 053 000 Old_age Always - 35 (0 13 0 0 0) +195 Hardware_ECC_Recovered 0x001a 064 049 000 Old_age Always - 51150302 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 +202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST3750/ST3750640NS/A8E2AEB8D455 b/HDD/Seagate/ST3750/ST3750640NS/A8E2AEB8D455 new file mode 100644 index 000000000..a703368ed --- /dev/null +++ b/HDD/Seagate/ST3750/ST3750640NS/A8E2AEB8D455 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda ES +Device Model: ST3750640NS +Serial Number: -- +Firmware Version: 3.AEG +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Tue Oct 20 20:39:05 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 202) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 115 079 006 Pre-fail Always - 91816384 + 3 Spin_Up_Time 0x0003 095 093 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 257 + 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 60 + 7 Seek_Error_Rate 0x000f 041 036 030 Pre-fail Always - 235940432641184 + 9 Power_On_Hours 0x0032 044 044 000 Old_age Always - 49634 + 10 Spin_Retry_Count 0x0013 099 099 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 288 +187 Reported_Uncorrect 0x0032 096 096 000 Old_age Always - 4 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 066 048 045 Old_age Always - 34 (Min/Max 33/35) +194 Temperature_Celsius 0x0022 034 052 000 Old_age Always - 34 (0 14 0 0 0) +195 Hardware_ECC_Recovered 0x001a 060 052 000 Old_age Always - 19479828 +197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 7456 +198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 7456 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 +202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 + +SMART Error Log Version: 1 +ATA Error Count: 4 + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 4 occurred at disk power-on lifetime: 32279 hours (1344 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 31 cf 0a 00 40 Error: UNC at LBA = 0x00000acf = 2767 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 42 00 80 80 0a 00 40 00 00:03:39.824 READ VERIFY SECTOR(S) EXT + 42 00 80 80 0a 00 40 00 00:03:39.758 READ VERIFY SECTOR(S) EXT + 42 00 80 00 0a 00 40 00 00:03:39.693 READ VERIFY SECTOR(S) EXT + 42 00 80 80 09 00 40 00 00:03:39.627 READ VERIFY SECTOR(S) EXT + 42 00 80 00 09 00 40 00 00:03:39.561 READ VERIFY SECTOR(S) EXT + +Error 3 occurred at disk power-on lifetime: 32279 hours (1344 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 31 cf 0a 00 40 Error: UNC at LBA = 0x00000acf = 2767 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 42 00 80 80 0a 00 40 00 00:03:39.824 READ VERIFY SECTOR(S) EXT + 42 00 80 00 0a 00 40 00 00:03:39.758 READ VERIFY SECTOR(S) EXT + 42 00 80 80 09 00 40 00 00:03:39.693 READ VERIFY SECTOR(S) EXT + 42 00 80 00 09 00 40 00 00:03:39.627 READ VERIFY SECTOR(S) EXT + 42 00 80 80 08 00 40 00 00:03:39.561 READ VERIFY SECTOR(S) EXT + +Error 2 occurred at disk power-on lifetime: 32279 hours (1344 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 31 cf 0a 00 40 Error: UNC at LBA = 0x00000acf = 2767 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 42 00 80 80 0a 00 40 00 00:22:40.880 READ VERIFY SECTOR(S) EXT + 42 00 80 80 0a 00 40 00 00:22:40.814 READ VERIFY SECTOR(S) EXT + 42 00 80 00 0a 00 40 00 00:22:40.749 READ VERIFY SECTOR(S) EXT + 42 00 80 80 09 00 40 00 00:22:40.683 READ VERIFY SECTOR(S) EXT + 42 00 80 00 09 00 40 00 00:22:40.617 READ VERIFY SECTOR(S) EXT + +Error 1 occurred at disk power-on lifetime: 32279 hours (1344 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 31 cf 0a 00 40 Error: UNC at LBA = 0x00000acf = 2767 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 42 00 80 80 0a 00 40 00 00:22:40.880 READ VERIFY SECTOR(S) EXT + 42 00 80 00 0a 00 40 00 00:22:40.814 READ VERIFY SECTOR(S) EXT + 42 00 80 80 09 00 40 00 00:22:40.749 READ VERIFY SECTOR(S) EXT + 42 00 80 00 09 00 40 00 00:22:40.683 READ VERIFY SECTOR(S) EXT + 42 00 80 80 08 00 40 00 00:22:40.617 READ VERIFY SECTOR(S) EXT + +SMART Self-test log structure revision number 1 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST3800/ST380013AS/B61552FBF183 b/HDD/Seagate/ST3800/ST380013AS/B61552FBF183 new file mode 100644 index 000000000..59b53f90d --- /dev/null +++ b/HDD/Seagate/ST3800/ST380013AS/B61552FBF183 @@ -0,0 +1,151 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus +Device Model: ST380013AS +Serial Number: -- +Firmware Version: 3.18 +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 +Local Time is: Wed Aug 19 06:37:41 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 049 043 006 - 172265796 + 3 Spin_Up_Time PO---- 098 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 5 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 2 + 7 Seek_Error_Rate POSR-- 078 060 030 - 78458582 + 9 Power_On_Hours -O--CK 020 020 000 - 70636 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1675 +194 Temperature_Celsius -O---K 032 054 000 - 32 +195 Hardware_ECC_Recovered -O-RC- 049 043 000 - 172265796 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory not supported + +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 SL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x20 SL R/O 1 Streaming performance log [OBS-8] +0x21 SL R/O 1 Write stream error log +0x22 SL R/O 1 Read stream error log +0x23 SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f SL R/W 16 Host vendor specific log +0xa0 SL VS 1 Device vendor specific log +0xa1 SL VS 20 Device vendor specific log +0xa2 SL VS 101 Device vendor specific log +0xa8 SL VS 20 Device vendor specific log +0xa9 SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5096 - +# 2 Short offline Completed without error 00% 5072 - +# 3 Short offline Completed without error 00% 5048 - +# 4 Extended offline Completed without error 00% 5026 - +# 5 Short offline Completed without error 00% 5025 - +# 6 Short offline Completed without error 00% 5001 - +# 7 Short offline Completed without error 00% 4977 - +# 8 Short offline Completed without error 00% 4954 - +# 9 Short offline Completed without error 00% 4930 - +#10 Short offline Completed without error 00% 4907 - +#11 Short offline Completed without error 00% 4883 - +#12 Extended offline Completed without error 00% 4861 - +#13 Short offline Completed without error 00% 4860 - +#14 Short offline Completed without error 00% 4836 - +#15 Short offline Completed without error 00% 4812 - +#16 Short offline Completed without error 00% 4789 - +#17 Short offline Completed without error 00% 4766 - +#18 Short offline Completed without error 00% 4742 - +#19 Short offline Completed without error 00% 4719 - +#20 Extended offline Completed without error 00% 4697 - +#21 Short offline Completed without error 00% 4695 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/HDD/Seagate/ST3802/ST380215A/1A358E718427 b/HDD/Seagate/ST3802/ST380215A/1A358E718427 new file mode 100644 index 000000000..ca99c7dbc --- /dev/null +++ b/HDD/Seagate/ST3802/ST380215A/1A358E718427 @@ -0,0 +1,288 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.10 +Device Model: ST380215A +Serial Number: -- +Firmware Version: 3.AAD +User Capacity: 80,025,280,000 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Wed Aug 26 06:27:05 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 27) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 191461434 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 327 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 081 060 030 - 167294945 + 9 Power_On_Hours -O--CK 094 094 000 - 5824 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 332 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 060 053 045 - 40 (Min/Max 32/43) +194 Temperature_Celsius -O---K 040 047 000 - 40 (0 20 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 074 066 000 - 27785057 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 176 000 - 119 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 1 Device vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL,SL VS 101 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer +0xff GPL - 23552 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 138 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 138 [17] occurred at disk power-on lifetime: 5585 hours (232 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 40 00 0f 00 00 00 00 00 e3 00 Error: ICRC, ABRT 16384 sectors at LBA = 0xf0003000000 = 16492724748288 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.695 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.252 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.810 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.376 READ DMA + c8 00 00 00 40 00 01 1e 00 4d 28 e1 00 00:08:05.938 READ DMA + +Error 137 [16] occurred at disk power-on lifetime: 5585 hours (232 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 40 00 0f 00 00 00 00 00 e3 00 Error: ICRC, ABRT 16384 sectors at LBA = 0xf0003000000 = 16492724748288 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.695 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.252 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.810 READ DMA + c8 00 00 00 40 00 01 1e 00 4d 28 e1 00 00:08:06.376 READ DMA + c8 00 00 00 40 00 01 1e 00 4d 28 e1 00 00:08:05.938 READ DMA + +Error 136 [15] occurred at disk power-on lifetime: 5585 hours (232 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 40 00 a6 00 00 00 00 00 e6 00 Error: ICRC, ABRT 16384 sectors at LBA = 0xa60006000000 = 182519030874112 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 40 00 06 b2 00 a6 a8 e6 00 00:08:07.695 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.252 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.810 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.376 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:05.938 READ DMA + +Error 135 [14] occurred at disk power-on lifetime: 5585 hours (232 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 40 00 0f 00 00 00 00 00 e3 00 Error: ICRC, ABRT 16384 sectors at LBA = 0xf0003000000 = 16492724748288 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.695 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.252 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.810 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.376 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:05.938 READ DMA + +Error 134 [13] occurred at disk power-on lifetime: 5585 hours (232 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 40 00 0f 00 00 00 00 00 e3 00 Error: ICRC, ABRT 16384 sectors at LBA = 0xf0003000000 = 16492724748288 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.695 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.252 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.810 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.376 READ DMA + c8 00 00 00 40 00 01 1e 00 4d 28 e1 00 00:08:05.938 READ DMA + +Error 133 [12] occurred at disk power-on lifetime: 5585 hours (232 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 40 00 0f 00 00 00 00 00 e3 00 Error: ICRC, ABRT 16384 sectors at LBA = 0xf0003000000 = 16492724748288 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.695 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.252 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.810 READ DMA + c8 00 00 00 40 00 01 1e 00 4d 28 e1 00 00:08:06.376 READ DMA + c8 00 00 00 40 00 01 1e 00 4d 28 e1 00 00:08:05.938 READ DMA + +Error 132 [11] occurred at disk power-on lifetime: 5585 hours (232 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 40 00 a6 00 00 00 00 00 e6 00 Error: ICRC, ABRT 16384 sectors at LBA = 0xa60006000000 = 182519030874112 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 40 00 06 b2 00 a6 a8 e6 00 00:08:07.695 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.252 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.810 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.376 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:05.938 READ DMA + +Error 131 [10] occurred at disk power-on lifetime: 5585 hours (232 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 40 00 0f 00 00 00 00 00 e3 00 Error: ICRC, ABRT 16384 sectors at LBA = 0xf0003000000 = 16492724748288 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.695 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:07.252 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.810 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:06.376 READ DMA + c8 00 00 00 40 00 03 1f 00 0f 68 e3 00 00:08:05.938 READ DMA + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 5635 - +# 2 Extended offline Interrupted (host reset) 40% 5614 - +# 3 Extended offline Completed without error 00% 2319 - +# 4 Extended offline Aborted by host 90% 2318 - +# 5 Extended offline Interrupted (host reset) 90% 150 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/HDD/Seagate/ST3808/ST380817AS/381E87D8C3BF b/HDD/Seagate/ST3808/ST380817AS/381E87D8C3BF new file mode 100644 index 000000000..4a4cf4445 --- /dev/null +++ b/HDD/Seagate/ST3808/ST380817AS/381E87D8C3BF @@ -0,0 +1,230 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus +Device Model: ST380817AS +Serial Number: -- +Firmware Version: 3.42 +User Capacity: 80,025,280,000 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 +Local Time is: Thu Aug 6 13:51:23 2020 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 430) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 47) minutes. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 057 049 006 - 74175094 + 3 Spin_Up_Time PO---- 098 098 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1746 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 088 060 030 - 717210961 + 9 Power_On_Hours -O--CK 073 073 000 - 23935 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1715 +194 Temperature_Celsius -O---K 036 047 000 - 36 (0 15 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 057 049 000 - 74175094 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory not supported + +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 SL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x20 SL R/O 1 Streaming performance log [OBS-8] +0x21 SL R/O 1 Write stream error log +0x22 SL R/O 1 Read stream error log +0x23 SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f SL R/W 16 Host vendor specific log +0xa0 SL VS 1 Device vendor specific log +0xa1 SL VS 20 Device vendor specific log +0xa2 SL VS 101 Device vendor specific log +0xa8 SL VS 20 Device vendor specific log +0xa9 SL VS 1 Device vendor specific log +0xe0 SL R/W 1 SCT Command/Status +0xe1 SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +ATA Error Count: 54 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 54 occurred at disk power-on lifetime: 22112 hours (921 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 10 51 10 60 f0 50 e0 Error: IDNF 16 sectors at LBA = 0x0050f060 = 5304416 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 20 10 60 f0 50 e0 00 11:02:14.065 READ DMA EXT + 25 20 10 f0 ee 50 e0 00 11:02:14.064 READ DMA EXT + 25 20 10 e0 ee 50 e0 00 11:02:14.064 READ DMA EXT + 25 20 10 d0 ee 50 e0 00 11:02:14.060 READ DMA EXT + 25 20 10 c0 ee 50 e0 00 11:02:14.069 READ DMA EXT + +Error 53 occurred at disk power-on lifetime: 22098 hours (920 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 10 51 10 60 f0 50 e0 Error: IDNF 16 sectors at LBA = 0x0050f060 = 5304416 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 20 10 60 f0 50 e0 00 21:37:51.656 READ DMA EXT + 25 20 10 f0 ee 50 e0 00 21:37:51.656 READ DMA EXT + 25 20 10 e0 ee 50 e0 00 21:37:51.656 READ DMA EXT + 25 20 10 d0 ee 50 e0 00 21:37:51.656 READ DMA EXT + 25 20 10 c0 ee 50 e0 00 21:37:51.655 READ DMA EXT + +Error 52 occurred at disk power-on lifetime: 22029 hours (917 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 10 51 10 60 f0 50 e0 Error: IDNF 16 sectors at LBA = 0x0050f060 = 5304416 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 20 10 60 f0 50 e0 00 00:00:28.800 READ DMA EXT + 25 20 10 f0 ee 50 e0 00 00:00:28.799 READ DMA EXT + 25 20 10 e0 ee 50 e0 00 00:00:28.799 READ DMA EXT + 25 20 10 d0 ee 50 e0 00 00:00:28.799 READ DMA EXT + 25 20 10 c0 ee 50 e0 00 00:00:28.799 READ DMA EXT + +Error 51 occurred at disk power-on lifetime: 22029 hours (917 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 10 51 10 60 f0 50 e0 Error: IDNF 16 sectors at LBA = 0x0050f060 = 5304416 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 20 10 60 f0 50 e0 00 00:06:38.221 READ DMA EXT + 25 20 10 f0 ee 50 e0 00 00:06:38.220 READ DMA EXT + 25 20 10 e0 ee 50 e0 00 00:06:38.220 READ DMA EXT + 25 20 10 d0 ee 50 e0 00 00:06:38.220 READ DMA EXT + 25 20 10 c0 ee 50 e0 00 00:06:38.219 READ DMA EXT + +Error 50 occurred at disk power-on lifetime: 22029 hours (917 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 10 51 10 60 f0 50 e0 Error: IDNF 16 sectors at LBA = 0x0050f060 = 5304416 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 20 10 60 f0 50 e0 00 00:01:21.205 READ DMA EXT + 25 20 10 f0 ee 50 e0 00 00:01:21.204 READ DMA EXT + 25 20 10 e0 ee 50 e0 00 00:01:21.204 READ DMA EXT + 25 20 10 d0 ee 50 e0 00 00:01:21.200 READ DMA EXT + 25 20 10 c0 ee 50 e0 00 00:01:21.209 READ DMA EXT + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/HDD/Seagate/ST4000/ST4000DM000-1F2168/365BAA8FE70F b/HDD/Seagate/ST4000/ST4000DM000-1F2168/365BAA8FE70F new file mode 100644 index 000000000..82e357e24 --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000DM000-1F2168/365BAA8FE70F @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Desktop HDD.15 +Device Model: ST4000DM000-1F2168 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC52 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5900 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:17:57 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 602) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 521) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 80564976 + 3 Spin_Up_Time PO---- 091 091 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1895 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 057 057 030 - 25773128552 + 9 Power_On_Hours -O--CK 048 048 000 - 45579 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 77 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 074 056 045 - 26 (0 1 39 23 0) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 55 +193 Load_Cycle_Count -O--CK 098 098 000 - 5030 +194 Temperature_Celsius -O---K 026 044 000 - 26 (128 0 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 1124h+31m+43.601s +241 Total_LBAs_Written ------ 100 253 000 - 7353511188 +242 Total_LBAs_Read ------ 100 253 000 - 4977823864 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 1223 Current Device Internal Status Data log +0x25 GPL R/O 1223 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 24/39 Celsius +Lifetime Min/Max Temperature: 14/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST4000/ST4000DM000-1F2168/E61B44DC26E3 b/HDD/Seagate/ST4000/ST4000DM000-1F2168/E61B44DC26E3 new file mode 100644 index 000000000..1a06efb66 --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000DM000-1F2168/E61B44DC26E3 @@ -0,0 +1,213 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Desktop HDD.15 +Device Model: ST4000DM000-1F2168 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC54 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5900 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 4 21:30:13 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 117) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 522) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 175652848 + 3 Spin_Up_Time PO---- 094 093 000 - 0 + 4 Start_Stop_Count -O--CK 076 076 020 - 24757 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 074 060 030 - 25671990 + 9 Power_On_Hours -O--CK 063 063 000 - 32582 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 220 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 0 17 19 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 057 047 045 - 43 (Min/Max 41/44) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 17 +193 Load_Cycle_Count -O--CK 063 063 000 - 74459 +194 Temperature_Celsius -O---K 043 053 000 - 43 (0 15 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 29702h+16m+16.768s +241 Total_LBAs_Written ------ 100 253 000 - 10541512270 +242 Total_LBAs_Read ------ 100 253 000 - 28392946533 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 1223 Current Device Internal Status Data log +0x25 GPL R/O 1223 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 4496 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 5176 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 5 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 32420 - +# 2 Short offline Completed without error 00% 32252 - +# 3 Short offline Completed without error 00% 32155 - +# 4 Short offline Completed without error 00% 31987 - +# 5 Short offline Completed without error 00% 31819 - +# 6 Short offline Completed without error 00% 31651 - +# 7 Short offline Completed without error 00% 31483 - +# 8 Short offline Completed without error 00% 31315 - +# 9 Short offline Completed without error 00% 31147 - +#10 Short offline Completed without error 00% 30979 - +#11 Short offline Completed without error 00% 30811 - +#12 Short offline Completed without error 00% 30643 - +#13 Short offline Completed without error 00% 30475 - +#14 Short offline Completed without error 00% 30307 - +#15 Short offline Completed without error 00% 30139 - +#16 Short offline Completed without error 00% 29971 - +#17 Short offline Completed without error 00% 29803 - +#18 Short offline Completed without error 00% 29635 - +#19 Short offline Completed without error 00% 29467 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 41/44 Celsius +Lifetime Min/Max Temperature: 15/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 220 --- Lifetime Power-On Resets +0x01 0x010 4 32582 --- Power-on Hours +0x01 0x018 6 10538957429 --- Logical Sectors Written +0x01 0x020 6 87453219 --- Number of Write Commands +0x01 0x028 6 28452866171 --- Logical Sectors Read +0x01 0x030 6 229773006 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 30067 --- Spindle Motor Power-on Hours +0x03 0x010 4 22872 --- Head Flying Hours +0x03 0x018 4 74459 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 19 --- Resets Between Cmd Acceptance and Completion + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST4000/ST4000DM004-2CV104/0374DDE0B1C7 b/HDD/Seagate/ST4000/ST4000DM004-2CV104/0374DDE0B1C7 new file mode 100644 index 000000000..5d200bb5e --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000DM004-2CV104/0374DDE0B1C7 @@ -0,0 +1,243 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST4000DM004-2CV104 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 8 14:53:48 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 489) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 072 064 006 - 17018697 + 3 Spin_Up_Time PO---- 097 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 295 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 080 060 045 - 92107995 + 9 Power_On_Hours -O--CK 085 085 000 - 13675 (37 100 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 295 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 1 1 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 069 049 040 - 31 (Min/Max 25/35) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 163 +193 Load_Cycle_Count -O--CK 100 100 000 - 1848 +194 Temperature_Celsius -O---K 031 051 000 - 31 (0 17 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 072 064 000 - 17018697 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 5371h+41m+28.003s +241 Total_LBAs_Written ------ 100 253 000 - 83146070801 +242 Total_LBAs_Read ------ 100 253 000 - 21723588531 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 7012 - +# 2 Short offline Completed without error 00% 4837 - +# 3 Short offline Completed without error 00% 4813 - +# 4 Short offline Completed without error 00% 4789 - +# 5 Short offline Completed without error 00% 4765 - +# 6 Short offline Completed without error 00% 4741 - +# 7 Short offline Completed without error 00% 4717 - +# 8 Short offline Completed without error 00% 4693 - +# 9 Short offline Completed without error 00% 4669 - +#10 Short offline Completed without error 00% 4645 - +#11 Short offline Completed without error 00% 4621 - +#12 Short offline Completed without error 00% 4597 - +#13 Short offline Completed without error 00% 4573 - +#14 Short offline Completed without error 00% 4549 - +#15 Short offline Completed without error 00% 4525 - +#16 Short offline Completed without error 00% 4501 - +#17 Short offline Completed without error 00% 4477 - +#18 Short offline Completed without error 00% 4453 - +#19 Short offline Completed without error 00% 4429 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 25/35 Celsius +Lifetime Min/Max Temperature: 17/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (106) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 295 --- Lifetime Power-On Resets +0x01 0x010 4 13675 --- Power-on Hours +0x01 0x018 6 83197383479 --- Logical Sectors Written +0x01 0x020 6 166261270 --- Number of Write Commands +0x01 0x028 6 21723613289 --- Logical Sectors Read +0x01 0x030 6 92730336 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 13609 --- Spindle Motor Power-on Hours +0x03 0x010 4 215 --- Head Flying Hours +0x03 0x018 4 1848 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 163 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 130 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1626 --- Number of Hardware Resets +0x06 0x010 4 676 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST4000/ST4000DM004-2CV104/0AF2B364E5E4 b/HDD/Seagate/ST4000/ST4000DM004-2CV104/0AF2B364E5E4 new file mode 100644 index 000000000..c47a98d2b --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000DM004-2CV104/0AF2B364E5E4 @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate BarraCuda 3.5 +Device Model: ST4000DM004-2CV104 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Oct 28 22:13:58 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 500) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 080 064 006 - 102669080 + 3 Spin_Up_Time PO---- 097 096 000 - 0 + 4 Start_Stop_Count -O--CK 095 095 020 - 5300 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 087 060 045 - 546692374 + 9 Power_On_Hours -O--CK 077 077 000 - 20743 (82 234 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 71 +183 Runtime_Bad_Block -O--CK 029 029 000 - 71 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 065 056 040 - 35 (Min/Max 32/36) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 365 +193 Load_Cycle_Count -O--CK 090 090 000 - 20970 +194 Temperature_Celsius -O---K 035 044 000 - 35 (0 15 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 080 064 000 - 102669080 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 10939h+256m+11.230s +241 Total_LBAs_Written ------ 100 253 000 - 47740799937 +242 Total_LBAs_Read ------ 100 253 000 - 143639404931 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 31/36 Celsius +Lifetime Min/Max Temperature: 16/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (113) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 71 --- Lifetime Power-On Resets +0x01 0x010 4 20743 --- Power-on Hours +0x01 0x018 6 47751453944 --- Logical Sectors Written +0x01 0x020 6 329083146 --- Number of Write Commands +0x01 0x028 6 143641832312 --- Logical Sectors Read +0x01 0x030 6 859913261 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 16596 --- Spindle Motor Power-on Hours +0x03 0x010 4 12844 --- Head Flying Hours +0x03 0x018 4 20970 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 365 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 1714 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 335 --- Number of Hardware Resets +0x06 0x010 4 26 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST4000/ST4000DM004-2CV104/91A9D3DE5EC0 b/HDD/Seagate/ST4000/ST4000DM004-2CV104/91A9D3DE5EC0 new file mode 100644 index 000000000..4d6c48c51 --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000DM004-2CV104/91A9D3DE5EC0 @@ -0,0 +1,103 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST4000DM004-2CV104 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 12:22:44 2020 +04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 484) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 082 064 006 Pre-fail Always - 159981999 + 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 56 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 063 060 045 Pre-fail Always - 1844644 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 793 (116 91 0) + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 56 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 077 063 040 Old_age Always - 23 (Min/Max 23/29) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 20 +193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 130 +194 Temperature_Celsius 0x0022 023 040 000 Old_age Always - 23 (0 21 0 0 0) +195 Hardware_ECC_Recovered 0x001a 082 064 000 Old_age Always - 159981999 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 184h+24m+25.633s +241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 330148774 +242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 336175535 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Seagate/ST4000/ST4000DM004-2CV104/B6673167872C b/HDD/Seagate/ST4000/ST4000DM004-2CV104/B6673167872C new file mode 100644 index 000000000..3fe579bf3 --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000DM004-2CV104/B6673167872C @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST4000DM004-2CV104 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 14:46:39 2020 SAST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 475) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 064 006 - 128714669 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 225 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 083 060 045 - 204359418 + 9 Power_On_Hours -O--CK 098 098 000 - 2048 (211 229 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 225 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 058 055 040 - 42 (Min/Max 26/42) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 53 +193 Load_Cycle_Count -O--CK 100 100 000 - 231 +194 Temperature_Celsius -O---K 042 045 000 - 42 (0 13 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 081 064 000 - 128714669 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 2031h+59m+50.189s +241 Total_LBAs_Written ------ 100 253 000 - 22617151686 +242 Total_LBAs_Read ------ 100 253 000 - 17005497182 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 26/42 Celsius +Lifetime Min/Max Temperature: 13/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (7) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 225 --- Lifetime Power-On Resets +0x01 0x010 4 2048 --- Power-on Hours +0x01 0x018 6 22639962582 --- Logical Sectors Written +0x01 0x020 6 166244165 --- Number of Write Commands +0x01 0x028 6 17006751835 --- Logical Sectors Read +0x01 0x030 6 78035340 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2038 --- Spindle Motor Power-on Hours +0x03 0x010 4 2038 --- Head Flying Hours +0x03 0x018 4 231 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 53 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 42 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 37 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 29 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 461 --- Number of Hardware Resets +0x06 0x010 4 44 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST4000/ST4000NE0025-2EW107/74233208A78C b/HDD/Seagate/ST4000/ST4000NE0025-2EW107/74233208A78C new file mode 100644 index 000000000..47c72489c --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000NE0025-2EW107/74233208A78C @@ -0,0 +1,231 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf Pro +Device Model: ST4000NE0025-2EW107 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: EN02 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 14:10:02 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 360) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 079 064 044 - 86309441 + 3 Spin_Up_Time PO---- 090 090 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 23 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 083 060 045 - 191964708 + 9 Power_On_Hours -O--CK 077 077 000 - 20695 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 23 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 067 059 040 - 33 (Min/Max 33/39) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 1435 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 42 +193 Load_Cycle_Count -O--CK 096 096 000 - 9294 +194 Temperature_Celsius -O---K 033 041 000 - 33 (0 21 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 004 001 000 - 86309441 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 4254h+28m+36.608s +241 Total_LBAs_Written ------ 100 253 000 - 8551905958 +242 Total_LBAs_Read ------ 100 253 000 - 22077440278 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 33/39 Celsius +Lifetime Min/Max Temperature: 21/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 10/40 Celsius +Min/Max Temperature Limit: 5/60 Celsius +Temperature History Size (Index): 128 (32) + +SCT Error Recovery Control: + Read: 100 (10.0 seconds) + Write: 100 (10.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 20695 --- Power-on Hours +0x01 0x018 6 8551905958 --- Logical Sectors Written +0x01 0x020 6 35613471 --- Number of Write Commands +0x01 0x028 6 22077996308 --- Logical Sectors Read +0x01 0x030 6 88617434 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 504682450 N-- Spindle Motor Power-on Hours +0x03 0x010 4 504666076 N-- Head Flying Hours +0x03 0x018 4 9294 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 42 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 31 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 32 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 20 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 255 --- Number of Hardware Resets +0x06 0x010 4 31 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST4000/ST4000NE0025-2EW107/77A6A4A25A84 b/HDD/Seagate/ST4000/ST4000NE0025-2EW107/77A6A4A25A84 new file mode 100644 index 000000000..f3d26cae3 --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000NE0025-2EW107/77A6A4A25A84 @@ -0,0 +1,231 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf Pro +Device Model: ST4000NE0025-2EW107 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: EN02 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 14:10:03 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 584) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: (1632) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 079 064 044 - 82490432 + 3 Spin_Up_Time PO---- 089 089 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 33 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 083 061 045 - 210583276 + 9 Power_On_Hours -O--CK 072 072 000 - 25392 (32 11 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 33 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 065 058 040 - 35 (Min/Max 34/41) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 1215 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 7 +193 Load_Cycle_Count -O--CK 096 096 000 - 9663 +194 Temperature_Celsius -O---K 035 042 000 - 35 (0 20 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 004 001 000 - 82490432 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 5037h+48m+39.071s +241 Total_LBAs_Written ------ 100 253 000 - 9032945462 +242 Total_LBAs_Read ------ 100 253 000 - 26291021186 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 34/41 Celsius +Lifetime Min/Max Temperature: 20/46 Celsius +Under/Over Temperature Limit Count: 0/3407 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (101) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 25392 --- Power-on Hours +0x01 0x018 6 9032945462 --- Logical Sectors Written +0x01 0x020 6 37876479 --- Number of Write Commands +0x01 0x028 6 26290963669 --- Logical Sectors Read +0x01 0x030 6 105743594 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2388301249 N-- Spindle Motor Power-on Hours +0x03 0x010 4 2388275939 N-- Head Flying Hours +0x03 0x018 4 9663 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 7 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 33 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 32 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 10 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 324 --- Number of Hardware Resets +0x06 0x010 4 36 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST4000/ST4000VN008-2DR166/9EDB8078758A b/HDD/Seagate/ST4000/ST4000VN008-2DR166/9EDB8078758A new file mode 100644 index 000000000..f06746698 --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000VN008-2DR166/9EDB8078758A @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST4000VN008-2DR166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5980 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 18 01:07:18 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 591) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 601) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 078 064 044 - 58664325 + 3 Spin_Up_Time PO---- 095 093 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 263 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 074 060 045 - 26376200 + 9 Power_On_Hours -O--CK 099 099 000 - 1490 (211 57 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 227 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 064 055 040 - 36 (Min/Max 36/37) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 89 +193 Load_Cycle_Count -O--CK 099 099 000 - 2315 +194 Temperature_Celsius -O---K 036 045 000 - 36 (0 17 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 1227 (50 192 0) +241 Total_LBAs_Written ------ 100 253 000 - 1446429977 +242 Total_LBAs_Read ------ 100 253 000 - 8125681120 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xd1 GPL VS 136 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/37 Celsius +Lifetime Min/Max Temperature: 17/44 Celsius +Under/Over Temperature Limit Count: 0/1 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (70) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 227 --- Lifetime Power-On Resets +0x01 0x010 4 1490 --- Power-on Hours +0x01 0x018 6 1446473927 --- Logical Sectors Written +0x01 0x020 6 4904801 --- Number of Write Commands +0x01 0x028 6 8240738920 --- Logical Sectors Read +0x01 0x030 6 11208170 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3874740988 N-- Spindle Motor Power-on Hours +0x03 0x010 4 3874739693 N-- Head Flying Hours +0x03 0x018 4 2315 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 90 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 966 --- Number of Hardware Resets +0x06 0x010 4 543 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST4000/ST4000VN008-2DR166/B41E13EB53ED b/HDD/Seagate/ST4000/ST4000VN008-2DR166/B41E13EB53ED new file mode 100644 index 000000000..1278da1b6 --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000VN008-2DR166/B41E13EB53ED @@ -0,0 +1,222 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST4000VN008-2DR166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5980 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 18 01:07:19 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 581) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 606) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 070 064 044 - 9791795 + 3 Spin_Up_Time PO---- 095 094 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1320 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 080 060 045 - 90242974 + 9 Power_On_Hours -O--CK 097 097 000 - 3075 (128 176 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 218 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 063 055 040 - 37 (Min/Max 37/38) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 935 +193 Load_Cycle_Count -O--CK 096 096 000 - 9757 +194 Temperature_Celsius -O---K 037 045 000 - 37 (0 18 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 1869 (204 53 0) +241 Total_LBAs_Written ------ 100 253 000 - 13204038597 +242 Total_LBAs_Read ------ 100 253 000 - 1304904673 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xd1 GPL VS 136 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 37/38 Celsius +Lifetime Min/Max Temperature: 17/45 Celsius +Under/Over Temperature Limit Count: 0/1 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (6) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 218 --- Lifetime Power-On Resets +0x01 0x010 4 3075 --- Power-on Hours +0x01 0x018 6 13001290189 --- Logical Sectors Written +0x01 0x020 6 30770297 --- Number of Write Commands +0x01 0x028 6 1304586706 --- Logical Sectors Read +0x01 0x030 6 7643829 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 323125784 N-- Spindle Motor Power-on Hours +0x03 0x010 4 323123105 N-- Head Flying Hours +0x03 0x018 4 9757 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 936 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2083 --- Number of Hardware Resets +0x06 0x010 4 451 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST4000/ST4000VX007-2DT166/4C2CD67582E1 b/HDD/Seagate/ST4000/ST4000VX007-2DT166/4C2CD67582E1 new file mode 100644 index 000000000..7554fc694 --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000VX007-2DT166/4C2CD67582E1 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ST4000VX007-2DT166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CV11 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5980 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:32:55 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 591) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 645) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 064 044 - 112630324 + 3 Spin_Up_Time PO---- 094 093 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 17 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 091 060 045 - 1263833149 + 9 Power_On_Hours -O--CK 077 077 000 - 20677 (82 2 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 18 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 065 060 040 - 35 (Min/Max 22/40) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 8 +193 Load_Cycle_Count -O--CK 093 093 000 - 14362 +194 Temperature_Celsius -O---K 035 040 000 - 35 (0 19 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 7281 (142 53 0) +241 Total_LBAs_Written ------ 100 253 000 - 5256461923 +242 Total_LBAs_Read ------ 100 253 000 - 4223960607 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xd1 GPL VS 136 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 22/40 Celsius +Lifetime Min/Max Temperature: 18/48 Celsius +Under/Over Temperature Limit Count: 0/1272 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (11) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 20677 --- Power-on Hours +0x01 0x018 6 5256461856 --- Logical Sectors Written +0x01 0x020 6 24663293 --- Number of Write Commands +0x01 0x028 6 4223960013 --- Logical Sectors Read +0x01 0x030 6 37769305 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1140360650 N-- Spindle Motor Power-on Hours +0x03 0x010 4 1140339973 N-- Head Flying Hours +0x03 0x018 4 14362 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 9 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 898 --- Number of Hardware Resets +0x06 0x010 4 450 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 80 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST4000/ST4000VX007-2DT166/85B51AEF865E b/HDD/Seagate/ST4000/ST4000VX007-2DT166/85B51AEF865E new file mode 100644 index 000000000..cd010086d --- /dev/null +++ b/HDD/Seagate/ST4000/ST4000VX007-2DT166/85B51AEF865E @@ -0,0 +1,222 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ST4000VX007-2DT166 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CV11 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5980 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:32:56 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 591) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 651) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 077 064 044 - 53494078 + 3 Spin_Up_Time PO---- 094 094 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 21 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 084 060 045 - 247191450 + 9 Power_On_Hours -O--CK 077 077 000 - 20681 (141 46 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 22 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 066 058 040 - 34 (Min/Max 24/40) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 6 +193 Load_Cycle_Count -O--CK 097 097 000 - 7160 +194 Temperature_Celsius -O---K 034 042 000 - 34 (0 19 0 0 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 3938 (127 53 0) +241 Total_LBAs_Written ------ 100 253 000 - 4335111724 +242 Total_LBAs_Read ------ 100 253 000 - 2023602922 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xd1 GPL VS 136 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 24/40 Celsius +Lifetime Min/Max Temperature: 19/50 Celsius +Under/Over Temperature Limit Count: 0/1274 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (39) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 20681 --- Power-on Hours +0x01 0x018 6 4321220145 --- Logical Sectors Written +0x01 0x020 6 17909084 --- Number of Write Commands +0x01 0x028 6 2023599709 --- Logical Sectors Read +0x01 0x030 6 12532427 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 958861905 N-- Spindle Motor Power-on Hours +0x03 0x010 4 958841229 N-- Head Flying Hours +0x03 0x018 4 7160 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 7 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 26 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 29 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 900 --- Number of Hardware Resets +0x06 0x010 4 453 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 82 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST500/ST500DM002-1BC142/89B5D2262937 b/HDD/Seagate/ST500/ST500DM002-1BC142/89B5D2262937 new file mode 100644 index 000000000..06b8bd2ea --- /dev/null +++ b/HDD/Seagate/ST500/ST500DM002-1BC142/89B5D2262937 @@ -0,0 +1,342 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST500DM002-1BC142 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: JC4B +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 17 22:23:08 2020 AST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 208 (intermediate), recommended: 208 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 83) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 111 099 006 - 29970045 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 089 089 020 - 11814 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 082 060 030 - 190217706 + 9 Power_On_Hours -O--CK 088 088 000 - 10815 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 089 089 020 - 11989 +183 Runtime_Bad_Block -O--CK 099 099 000 - 1 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 022 022 000 - 78 +188 Command_Timeout -O--CK 100 088 000 - 1 1 3006 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 067 052 045 - 33 (Min/Max 28/38) +194 Temperature_Celsius -O---K 033 048 000 - 33 (0 21 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 035 028 000 - 29970045 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 89 +240 Head_Flying_Hours ------ 100 253 000 - 28312h+18m+37.937s +241 Total_LBAs_Written ------ 100 253 000 - 3504271051 +242 Total_LBAs_Read ------ 100 253 000 - 1834545530 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 79 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 79 [18] occurred at disk power-on lifetime: 2172 hours (90 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 38 43 59 20 00 00 Error: UNC at LBA = 0x38435920 = 943937824 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 00 38 43 58 ca e0 00 00:22:51.373 READ DMA EXT + 35 00 00 00 48 00 00 07 b2 2d a8 e0 00 00:22:51.372 WRITE DMA EXT + 35 00 00 00 38 00 00 07 af 82 50 e0 00 00:22:51.371 WRITE DMA EXT + 25 00 00 00 80 00 00 38 43 64 04 e0 00 00:22:51.312 READ DMA EXT + 25 00 00 00 40 00 00 00 41 7c 00 e0 00 00:22:51.286 READ DMA EXT + +Error 78 [17] occurred at disk power-on lifetime: 2155 hours (89 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 38 43 59 20 00 00 Error: UNC at LBA = 0x38435920 = 943937824 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 00 38 43 58 ca e0 00 01:59:02.873 READ DMA EXT + 25 00 00 00 80 00 00 38 43 64 04 e0 00 01:59:02.862 READ DMA EXT + 25 00 00 00 80 00 00 38 43 54 68 e0 00 01:59:02.860 READ DMA EXT + 25 00 00 00 80 00 00 38 43 53 12 e0 00 01:59:02.849 READ DMA EXT + 25 00 00 00 80 00 00 39 8d f6 d8 e0 00 01:59:02.847 READ DMA EXT + +Error 77 [16] occurred at disk power-on lifetime: 2155 hours (89 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 38 43 59 20 00 00 Error: UNC at LBA = 0x38435920 = 943937824 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 00 38 43 58 ee e0 00 01:55:16.557 READ DMA EXT + 25 00 00 00 80 00 00 39 90 76 78 e0 00 01:55:16.556 READ DMA EXT + 25 00 00 00 80 00 00 38 43 6b 90 e0 00 01:55:16.546 READ DMA EXT + 25 00 00 00 80 00 00 38 43 65 fc e0 00 01:55:16.537 READ DMA EXT + 25 00 00 00 80 00 00 38 44 74 8c e0 00 01:55:16.513 READ DMA EXT + +Error 76 [15] occurred at disk power-on lifetime: 2132 hours (88 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 38 43 59 20 00 00 Error: UNC at LBA = 0x38435920 = 943937824 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 00 38 43 58 ca e0 00 00:39:02.027 READ DMA EXT + 25 00 00 00 80 00 00 38 43 64 04 e0 00 00:39:02.015 READ DMA EXT + 25 00 00 00 80 00 00 38 43 54 68 e0 00 00:39:02.013 READ DMA EXT + 25 00 00 00 80 00 00 38 43 53 12 e0 00 00:39:02.003 READ DMA EXT + 25 00 00 00 80 00 00 39 8d f6 d8 e0 00 00:39:02.000 READ DMA EXT + +Error 75 [14] occurred at disk power-on lifetime: 2132 hours (88 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 38 43 59 20 00 00 Error: UNC at LBA = 0x38435920 = 943937824 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 00 38 43 58 ee e0 00 00:35:57.796 READ DMA EXT + 25 00 00 00 80 00 00 39 90 76 78 e0 00 00:35:57.795 READ DMA EXT + 35 00 00 00 08 00 00 38 44 57 b8 e0 00 00:35:57.795 WRITE DMA EXT + 25 00 00 00 80 00 00 38 43 6b 90 e0 00 00:35:57.786 READ DMA EXT + 35 00 00 00 08 00 00 38 44 57 40 e0 00 00:35:57.785 WRITE DMA EXT + +Error 74 [13] occurred at disk power-on lifetime: 2119 hours (88 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 38 43 59 20 00 00 Error: UNC at LBA = 0x38435920 = 943937824 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 00 38 43 58 ca e0 00 04:47:48.945 READ DMA EXT + 25 00 00 00 10 00 00 39 aa c2 a0 e0 00 04:47:48.945 READ DMA EXT + 25 00 00 00 80 00 00 38 43 64 04 e0 00 04:47:48.937 READ DMA EXT + 25 00 00 00 80 00 00 38 43 54 68 e0 00 04:47:48.936 READ DMA EXT + 25 00 00 00 38 00 00 39 aa c2 68 e0 00 04:47:48.923 READ DMA EXT + +Error 73 [12] occurred at disk power-on lifetime: 2119 hours (88 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 38 43 59 20 00 00 Error: UNC at LBA = 0x38435920 = 943937824 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 00 38 43 58 ee e0 00 04:42:20.396 READ DMA EXT + 25 00 00 00 80 00 00 39 90 76 78 e0 00 04:42:20.382 READ DMA EXT + 25 00 00 00 80 00 00 38 43 6b 90 e0 00 04:42:20.375 READ DMA EXT + 25 00 00 00 80 00 00 38 43 65 fc e0 00 04:42:20.363 READ DMA EXT + 25 00 00 00 80 00 00 38 44 74 8c e0 00 04:42:20.361 READ DMA EXT + +Error 72 [11] occurred at disk power-on lifetime: 2038 hours (84 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 38 43 59 20 00 00 Error: UNC at LBA = 0x38435920 = 943937824 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 80 00 00 38 43 58 ca e0 00 02:56:05.575 READ DMA EXT + 25 00 00 00 80 00 00 38 43 64 04 e0 00 02:56:05.564 READ DMA EXT + 25 00 00 00 80 00 00 38 43 54 68 e0 00 02:56:05.562 READ DMA EXT + 25 00 00 00 80 00 00 38 43 53 12 e0 00 02:56:05.552 READ DMA EXT + 25 00 00 00 80 00 00 39 8d f6 d8 e0 00 02:56:05.549 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 10809 - +# 2 Extended offline Completed without error 00% 9888 - +# 3 Short offline Completed without error 00% 9728 - +# 4 Extended offline Completed without error 00% 9387 - +# 5 Extended offline Completed without error 00% 7235 - +# 6 Short offline Completed without error 00% 7205 - +# 7 Extended offline Completed without error 00% 7199 - +# 8 Extended offline Completed without error 00% 7048 - +# 9 Extended offline Completed without error 00% 6923 - +#10 Extended offline Completed: read failure 10% 6920 943937824 +#11 Extended offline Completed: read failure 10% 6918 943937824 +#12 Extended offline Completed: read failure 60% 6917 518569069 +#13 Extended offline Completed: read failure 60% 6914 494499612 +#14 Extended offline Interrupted (host reset) 90% 6914 - +#15 Extended offline Completed: read failure 60% 6913 487723840 +#16 Extended offline Completed: read failure 70% 6906 397701938 +#17 Extended offline Completed: read failure 70% 6904 397701938 +#18 Extended offline Completed: read failure 70% 6904 361277612 +#19 Extended offline Completed: read failure 70% 6903 360922791 +9 of 9 failed self-tests are outdated by newer successful extended offline self-test # 1 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 28/38 Celsius +Lifetime Min/Max Temperature: 21/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (77) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST500/ST500DM002-1BD142/05A9895E9673 b/HDD/Seagate/ST500/ST500DM002-1BD142/05A9895E9673 new file mode 100644 index 000000000..088e64aa9 --- /dev/null +++ b/HDD/Seagate/ST500/ST500DM002-1BD142/05A9895E9673 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST500DM002-1BD142 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: KC45 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 10:20:09 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 79) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 112 099 006 - 42792352 + 3 Spin_Up_Time PO---- 100 097 000 - 0 + 4 Start_Stop_Count -O--CK 098 098 020 - 2476 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 082 057 030 - 17924925945 + 9 Power_On_Hours -O--CK 024 024 000 - 66718 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 367 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 062 048 045 - 38 (Min/Max 33/39) +194 Temperature_Celsius -O---K 038 052 000 - 38 (0 16 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 025 013 000 - 42792352 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 60619h+06m+45.292s +241 Total_LBAs_Written ------ 100 253 000 - 784360245 +242 Total_LBAs_Read ------ 100 253 000 - 1488587897 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 00% 61052 - +# 2 Short offline Completed without error 00% 61051 - +# 3 Short offline Completed without error 00% 27511 - +# 4 Short offline Completed without error 00% 26614 - +# 5 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 33/39 Celsius +Lifetime Min/Max Temperature: 18/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (54) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST500/ST500DM002-1BD142/6A67A45D8AF0 b/HDD/Seagate/ST500/ST500DM002-1BD142/6A67A45D8AF0 new file mode 100644 index 000000000..4b89ef82a --- /dev/null +++ b/HDD/Seagate/ST500/ST500DM002-1BD142/6A67A45D8AF0 @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST500DM002-1BD142 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: KC48 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Aug 3 18:51:58 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 208 (intermediate), recommended: 208 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 81) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 187246488 + 3 Spin_Up_Time PO---- 100 098 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1928 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 085 060 030 - 360020230 + 9 Power_On_Hours -O--CK 080 080 000 - 17540 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1923 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 0 0 13 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 072 051 045 - 28 (Min/Max 22/28) +194 Temperature_Celsius -O---K 028 049 000 - 28 (0 15 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 062 039 000 - 187246488 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 +240 Head_Flying_Hours ------ 100 253 000 - 17503h+05m+58.892s +241 Total_LBAs_Written ------ 100 253 000 - 3920608150 +242 Total_LBAs_Read ------ 100 253 000 - 2082998520 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 22/27 Celsius +Lifetime Min/Max Temperature: 15/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (125) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST500/ST500DM002-1BD142/DC4C24A2840B b/HDD/Seagate/ST500/ST500DM002-1BD142/DC4C24A2840B new file mode 100644 index 000000000..30388ecbf --- /dev/null +++ b/HDD/Seagate/ST500/ST500DM002-1BD142/DC4C24A2840B @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST500DM002-1BD142 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: KC45 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Oct 25 07:49:49 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 81) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 115 099 006 - 97593040 + 3 Spin_Up_Time PO---- 100 099 000 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1717 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 087 060 030 - 506599972 + 9 Power_On_Hours -O--CK 077 077 000 - 20203 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1712 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 2 2 3 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 067 058 045 - 33 (Min/Max 28/36) +194 Temperature_Celsius -O---K 033 042 000 - 33 (0 15 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 041 015 000 - 97593040 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 20181h+02m+53.779s +241 Total_LBAs_Written ------ 100 253 000 - 994773702 +242 Total_LBAs_Read ------ 100 253 000 - 1011999725 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2928 Device vendor specific log +0xbd GPL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 28/36 Celsius +Lifetime Min/Max Temperature: 15/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (52) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST500/ST500DM002-1ER14C/788AA6B3634F b/HDD/Seagate/ST500/ST500DM002-1ER14C/788AA6B3634F new file mode 100644 index 000000000..31453abb9 --- /dev/null +++ b/HDD/Seagate/ST500/ST500DM002-1ER14C/788AA6B3634F @@ -0,0 +1,101 @@ +smartctl 7.1 2019-12-30 r5022 [DragonFly 5.8-RELEASE x86_64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 7200.14 (AF) +Device Model: ST500DM002-1ER14C +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC45 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Nov 2 19:05:59 2020 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 72) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 50) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 109 099 006 Pre-fail Always - 24962424 + 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1464 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 193504460 + 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21176 + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1483 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 067 059 045 Old_age Always - 33 (Min/Max 24/33) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 503 +193 Load_Cycle_Count 0x0032 085 085 000 Old_age Always - 30448 +194 Temperature_Celsius 0x0022 033 041 000 Old_age Always - 33 (0 19 0 0 0) +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 19552h+29m+12.730s +241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 30254377441 +242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1633835985066 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Seagate/ST500/ST500DM009-2DM14C/36241B42F8DE b/HDD/Seagate/ST500/ST500DM009-2DM14C/36241B42F8DE new file mode 100644 index 000000000..2335ebf23 --- /dev/null +++ b/HDD/Seagate/ST500/ST500DM009-2DM14C/36241B42F8DE @@ -0,0 +1,99 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 3.5 +Device Model: ST500DM009-2DM14C +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: CC46 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 13 20:33:56 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 54) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1085) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 194540936 + 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 543 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 63606864 + 9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 26939 + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 543 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 069 066 045 Old_age Always - 31 (Min/Max 23/32) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 71 +193 Load_Cycle_Count 0x0032 036 036 000 Old_age Always - 129181 +194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 19 0 0 0) +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 24755h+31m+53.588s +241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1675640659 +242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1730787638 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Seagate/ST500/ST500LM012 HN-M500MBB/8B51A34A5C9B b/HDD/Seagate/ST500/ST500LM012 HN-M500MBB/8B51A34A5C9B new file mode 100644 index 000000000..c21519153 --- /dev/null +++ b/HDD/Seagate/ST500/ST500LM012 HN-M500MBB/8B51A34A5C9B @@ -0,0 +1,101 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Samsung SpinPoint M8 (AF) +Device Model: ST500LM012 HN-M500MBB +Serial Number: -- +LU WWN Device Id: 5 0004cf ... +Firmware Version: 2BA30001 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Oct 19 16:53:38 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6540) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 109) minutes. +SCT capabilities: (0x003f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 45 + 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 + 3 Spin_Up_Time 0x0023 094 090 025 Pre-fail Always - 1931 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 933 + 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 + 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 4171 + 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 85 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 929 +191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 641 +192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 61 +194 Temperature_Celsius 0x0002 062 053 000 Old_age Always - 38 (Min/Max 11/47) +195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 24202 +223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 85 +225 Load_Cycle_Count 0x0032 063 063 000 Old_age Always - 375198 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (0-65535) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/Seagate/ST500/ST500LM021-1KJ152/478E57347BAF b/HDD/Seagate/ST500/ST500LM021-1KJ152/478E57347BAF new file mode 100644 index 000000000..e25fc0b8c --- /dev/null +++ b/HDD/Seagate/ST500/ST500LM021-1KJ152/478E57347BAF @@ -0,0 +1,343 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Laptop HDD +Device Model: ST500LM021-1KJ152 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0002LIM1 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Sep 28 14:26:36 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 82) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 097 034 - 234940040 + 3 Spin_Up_Time PO---- 098 098 000 - 0 + 4 Start_Stop_Count -O--CK 097 097 020 - 3186 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 084 060 030 - 275856247 + 9 Power_On_Hours -O--CK 085 085 000 - 13739 (237 116 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 098 098 020 - 2718 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 001 001 000 - 110 +188 Command_Timeout -O--CK 100 100 000 - 4295032833 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 077 050 045 - 23 (0 6 23 16 0) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 363 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 9 +193 Load_Cycle_Count -O--CK 001 001 000 - 365923 +194 Temperature_Celsius -O---K 023 050 000 - 23 (128 0 0 0 0) +196 Reallocated_Event_Count POSR-- 088 088 030 - 10928 (16083 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xbd-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 18 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 110 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 110 [9] occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 81 9d 30 00 00 Error: UNC at LBA = 0x07819d30 = 125934896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 07 81 9d 30 40 00 01:28:41.623 READ FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:28:40.852 FLUSH CACHE EXT + 61 00 00 00 10 00 00 00 86 f7 b0 40 00 01:28:40.852 WRITE FPDMA QUEUED + ef 00 90 00 03 00 00 00 00 00 00 a0 00 01:28:40.791 SET FEATURES [Disable SATA feature] + 61 00 00 00 08 00 00 01 88 a2 f0 40 00 01:28:40.790 WRITE FPDMA QUEUED + +Error 109 [8] occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 81 9d 30 00 00 Error: UNC at LBA = 0x07819d30 = 125934896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 07 81 9d 30 40 00 01:28:38.890 READ FPDMA QUEUED + ef 00 90 00 03 00 00 00 00 00 00 a0 00 01:28:38.057 SET FEATURES [Disable SATA feature] + ef 00 02 00 00 00 00 00 00 00 00 a0 00 01:28:38.006 SET FEATURES [Enable write cache] + 00 00 00 00 00 00 00 00 00 00 00 00 ff 01:28:37.886 NOP [Abort queued commands] + 60 00 00 00 08 00 00 07 81 9d 30 40 00 01:28:36.132 READ FPDMA QUEUED + +Error 108 [7] occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 81 9d 30 00 00 Error: UNC at LBA = 0x07819d30 = 125934896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 07 81 9d 30 40 00 01:28:36.132 READ FPDMA QUEUED + 61 00 00 00 08 00 00 00 86 f7 20 40 00 01:28:35.364 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:28:35.358 FLUSH CACHE EXT + 61 00 00 00 08 00 00 00 86 f7 30 40 00 01:28:35.358 WRITE FPDMA QUEUED + ef 00 90 00 03 00 00 00 00 00 00 a0 00 01:28:35.300 SET FEATURES [Disable SATA feature] + +Error 107 [6] occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 81 9d 30 00 00 Error: UNC at LBA = 0x07819d30 = 125934896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 07 81 9d 30 40 00 01:28:33.415 READ FPDMA QUEUED + 61 00 00 00 08 00 00 05 9a cb 30 40 00 01:28:32.643 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 08 29 04 08 40 00 01:28:32.643 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 8d 51 40 40 00 01:28:32.643 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 8b 70 88 40 00 01:28:32.642 WRITE FPDMA QUEUED + +Error 106 [5] occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 81 9d 30 00 00 Error: UNC at LBA = 0x07819d30 = 125934896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 07 81 9d 30 40 00 01:28:30.680 READ FPDMA QUEUED + ef 00 90 00 03 00 00 00 00 00 00 a0 00 01:28:27.931 SET FEATURES [Disable SATA feature] + ef 00 02 00 00 00 00 00 00 00 00 a0 00 01:28:27.879 SET FEATURES [Enable write cache] + 00 00 00 00 00 00 00 00 00 00 00 00 ff 01:28:27.759 NOP [Abort queued commands] + 60 00 00 00 08 00 00 07 81 9d 30 40 00 01:28:26.007 READ FPDMA QUEUED + +Error 105 [4] occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 81 9d 30 00 00 Error: UNC at LBA = 0x07819d30 = 125934896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 07 81 9d 30 40 00 01:28:26.007 READ FPDMA QUEUED + 61 00 00 00 10 00 00 00 7f f3 70 40 00 01:28:25.493 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 7f f3 08 40 00 01:28:25.492 WRITE FPDMA QUEUED + ef 00 90 00 03 00 00 00 00 00 00 a0 00 01:28:25.149 SET FEATURES [Disable SATA feature] + 61 00 00 00 40 00 00 01 63 53 e0 40 00 01:28:25.148 WRITE FPDMA QUEUED + +Error 104 [3] occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 81 9d 30 00 00 Error: WP at LBA = 0x07819d30 = 125934896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 40 00 00 01 63 53 a0 40 00 01:28:23.221 WRITE FPDMA QUEUED + 60 00 00 00 08 00 00 07 81 9d 30 40 00 01:28:23.221 READ FPDMA QUEUED + ef 00 90 00 03 00 00 00 00 00 00 a0 00 01:28:23.187 SET FEATURES [Disable SATA feature] + 61 00 00 00 40 00 00 01 63 54 20 40 00 01:28:23.187 WRITE FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 a0 00 01:28:23.169 SET FEATURES [Enable write cache] + +Error 103 [2] occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 81 9d 30 00 00 Error: UNC at LBA = 0x07819d30 = 125934896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 07 81 9d 30 40 00 01:28:21.319 READ FPDMA QUEUED + 61 00 00 00 08 00 00 00 60 35 60 40 00 01:28:20.574 WRITE FPDMA QUEUED + ef 00 90 00 03 00 00 00 00 00 00 a0 00 01:28:20.496 SET FEATURES [Disable SATA feature] + 61 00 00 00 40 00 00 01 63 53 e0 40 00 01:28:20.496 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 00 60 35 20 40 00 01:28:20.495 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0x50) Completed without error 00% 8510 - +# 2 Short offline Completed without error 00% 8510 - +# 3 Vendor (0x50) Completed without error 00% 8050 - +# 4 Short offline Completed without error 00% 8050 - +# 5 Vendor (0x50) Completed without error 00% 7468 - +# 6 Short offline Completed without error 00% 7468 - +# 7 Vendor (0x50) Completed without error 00% 6796 - +# 8 Short offline Completed without error 00% 6796 - +# 9 Vendor (0x50) Completed without error 00% 6052 - +#10 Short offline Completed without error 00% 6052 - +#11 Vendor (0x50) Completed without error 00% 5384 - +#12 Short offline Completed without error 00% 5384 - +#13 Vendor (0x50) Completed without error 00% 4681 - +#14 Short offline Completed without error 00% 4680 - +#15 Vendor (0x50) Completed without error 00% 4180 - +#16 Short offline Completed without error 00% 4180 - +#17 Vendor (0x50) Completed without error 00% 3981 - +#18 Short offline Completed without error 00% 3981 - +#19 Vendor (0x50) Completed without error 00% 3942 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 16 Celsius +Power Cycle Min/Max Temperature: 16/16 Celsius +Lifetime Min/Max Temperature: 13/50 Celsius +Under/Over Temperature Limit Count: 0/1 +Vendor specific: +00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 11 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (58) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST500/ST500LT012-1DG142/AFFF48FE4807 b/HDD/Seagate/ST500/ST500LT012-1DG142/AFFF48FE4807 new file mode 100644 index 000000000..fbb662509 --- /dev/null +++ b/HDD/Seagate/ST500/ST500LT012-1DG142/AFFF48FE4807 @@ -0,0 +1,222 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Laptop HDD +Device Model: ST500LT012-1DG142 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 1003YAM1 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 30 14:17:25 2020 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 104) minutes. +SCT capabilities: (0x103d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 119 099 006 - 228469064 + 3 Spin_Up_Time PO---K 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 000 - 859 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-K 076 060 030 - 4340143947 + 9 Power_On_Hours -O--CK 094 094 000 - 5837 + 10 Spin_Retry_Count PO--CK 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 854 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 098 098 000 - 2 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 071 059 045 - 29 (Min/Max 27/29) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 131 +192 Power-Off_Retract_Count -O---K 100 100 000 - 14 +193 Load_Cycle_Count -O--CK 001 001 000 - 279579 +194 Temperature_Celsius -O---K 029 041 000 - 29 (0 9 0 0 0) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xb6 GPL VS 16385 Device vendor specific log +0xbd-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 10 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 18 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 1459 hours (60 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 05 96 ad 28 00 00 Error: UNC at LBA = 0x0596ad28 = 93760808 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 05 96 ad 28 40 00 1d+07:08:09.568 READ FPDMA QUEUED + 60 00 00 00 08 00 00 05 96 ad 20 40 00 1d+07:08:09.567 READ FPDMA QUEUED + 60 00 00 00 08 00 00 05 96 ad 18 40 00 1d+07:08:09.567 READ FPDMA QUEUED + 60 00 00 00 08 00 00 05 96 ad 10 40 00 1d+07:08:09.567 READ FPDMA QUEUED + 60 00 00 00 08 00 00 05 96 ad 08 40 00 1d+07:08:09.567 READ FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 1459 hours (60 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 05 96 ad 28 00 00 Error: UNC at LBA = 0x0596ad28 = 93760808 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 05 96 ac e0 40 00 1d+07:08:06.147 READ FPDMA QUEUED + 60 00 00 01 00 00 00 05 96 ab e0 40 00 1d+07:08:06.147 READ FPDMA QUEUED + 60 00 00 01 00 00 00 05 96 aa e0 40 00 1d+07:08:06.147 READ FPDMA QUEUED + 60 00 00 01 00 00 00 05 96 a9 e0 40 00 1d+07:08:06.147 READ FPDMA QUEUED + 60 00 00 01 00 00 00 05 96 a8 e0 40 00 1d+07:08:06.147 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 27/29 Celsius +Lifetime Min/Max Temperature: 13/42 Celsius +Under/Over Temperature Limit Count: 0/1 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (72) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST500/ST500LT012-9WS142/2FEF686E6376 b/HDD/Seagate/ST500/ST500LT012-9WS142/2FEF686E6376 new file mode 100644 index 000000000..16e6e8d82 --- /dev/null +++ b/HDD/Seagate/ST500/ST500LT012-9WS142/2FEF686E6376 @@ -0,0 +1,188 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Laptop HDD +Device Model: ST500LT012-9WS142 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0002SDM1 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Jul 26 05:56:40 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 97) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x1035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 120 099 006 - 243073744 + 3 Spin_Up_Time PO---- 099 099 000 - 0 + 4 Start_Stop_Count -O--CK 095 095 020 - 5870 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 074 060 030 - 30267522298 + 9 Power_On_Hours -O--CK 087 087 000 - 11518 (203 111 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 095 095 020 - 5382 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 069 048 045 - 31 (Min/Max 31/31) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 948 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 59 +193 Load_Cycle_Count -O--CK 040 040 000 - 121473 +194 Temperature_Celsius -O---K 031 052 000 - 31 (0 14 0 0 0) +196 Reallocated_Event_Count POSR-- 088 088 030 - 11118 (64835 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 088 088 000 - 11118 (253 67 0) +241 Total_LBAs_Written ------ 100 253 000 - 280140703 +242 Total_LBAs_Read ------ 100 253 000 - 3713033464 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xbd-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8991 - +# 2 Short offline Completed without error 00% 6163 - +# 3 Offline Aborted by host 90% 6163 - +# 4 Short offline Aborted by host 90% 3105 - +# 5 Short offline Completed without error 00% 3085 - +# 6 Short offline Completed without error 00% 3081 - +# 7 Short offline Completed without error 00% 2985 - +# 8 Short offline Completed without error 00% 2754 - +# 9 Short offline Completed without error 00% 2545 - +#10 Short offline Completed without error 00% 2083 - +#11 Short offline Completed without error 00% 1866 - +#12 Short offline Completed without error 00% 1651 - +#13 Short offline Completed without error 00% 1449 - +#14 Short offline Completed without error 00% 975 - +#15 Short offline Completed without error 00% 480 - +#16 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 26/30 Celsius +Lifetime Min/Max Temperature: 14/52 Celsius +Specified Max Operating Temperature: 31 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 30 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (79) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST5000/ST5000LM000-2AN170/13F602B26125 b/HDD/Seagate/ST5000/ST5000LM000-2AN170/13F602B26125 new file mode 100644 index 000000000..0ee732be3 --- /dev/null +++ b/HDD/Seagate/ST5000/ST5000LM000-2AN170/13F602B26125 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST5000LM000-2AN170 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 5,000,981,078,016 bytes [5.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5526 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 09:55:44 2020 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 816) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 075 065 006 - 28611293 + 3 Spin_Up_Time PO---- 100 099 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 10 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 066 060 045 - 3816508 + 9 Power_On_Hours -O--CK 100 100 000 - 640 (183 113 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 9 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 063 048 040 - 37 (Min/Max 37/37) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 6 +193 Load_Cycle_Count -O--CK 100 100 000 - 124 +194 Temperature_Celsius -O---K 037 052 000 - 37 (0 26 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 075 065 000 - 28611293 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 16 (197 53 0) +241 Total_LBAs_Written ------ 100 253 000 - 3887163774 +242 Total_LBAs_Read ------ 100 253 000 - 12767175 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 168 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 37/37 Celsius +Lifetime Min/Max Temperature: 26/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (35) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 640 --- Power-on Hours +0x01 0x018 6 3887163412 --- Logical Sectors Written +0x01 0x020 6 15364543 --- Number of Write Commands +0x01 0x028 6 12463199 --- Logical Sectors Read +0x01 0x030 6 167092 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4113469151 N-- Spindle Motor Power-on Hours +0x03 0x010 4 4113468510 N-- Head Flying Hours +0x03 0x018 4 124 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 7 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x05 0x030 1 45 --- Highest Average Short Term Temperature +0x05 0x038 1 34 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 34 --- Number of Hardware Resets +0x06 0x010 4 1 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST5000/ST5000LM000-2AN170/C5332C67F1C0 b/HDD/Seagate/ST5000/ST5000LM000-2AN170/C5332C67F1C0 new file mode 100644 index 000000000..0c48dce73 --- /dev/null +++ b/HDD/Seagate/ST5000/ST5000LM000-2AN170/C5332C67F1C0 @@ -0,0 +1,224 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda 2.5 5400 +Device Model: ST5000LM000-2AN170 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 5,000,981,078,016 bytes [5.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5526 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 12:29:47 2020 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 808) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 084 064 006 - 230717072 + 3 Spin_Up_Time PO---- 097 097 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 27 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 087 060 045 - 519050781 + 9 Power_On_Hours -O--CK 091 091 000 - 8247 (3 131 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 26 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 050 044 040 - 50 (Min/Max 41/56) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 19 +193 Load_Cycle_Count -O--CK 100 100 000 - 391 +194 Temperature_Celsius -O---K 050 056 000 - 50 (0 23 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 084 064 000 - 230717072 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 5117 (188 191 0) +241 Total_LBAs_Written ------ 100 253 000 - 11766625270 +242 Total_LBAs_Read ------ 100 253 000 - 42117305714 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 168 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 51 Celsius +Power Cycle Min/Max Temperature: 39/56 Celsius +Lifetime Min/Max Temperature: 23/56 Celsius +Under/Over Temperature Limit Count: 0/1 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (4) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 8247 --- Power-on Hours +0x01 0x018 6 11766632030 --- Logical Sectors Written +0x01 0x020 6 75249611 --- Number of Write Commands +0x01 0x028 6 42117323330 --- Logical Sectors Read +0x01 0x030 6 175681085 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3659355463 N-- Spindle Motor Power-on Hours +0x03 0x010 4 3659347216 N-- Head Flying Hours +0x03 0x018 4 391 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 20 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 51 --- Current Temperature +0x05 0x010 1 50 --- Average Short Term Temperature +0x05 0x018 1 49 --- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 53 --- Highest Average Short Term Temperature +0x05 0x038 1 35 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 38 --- Lowest Average Long Term Temperature +0x05 0x050 4 11 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2 --- Number of Hardware Resets +0x06 0x010 4 2 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST6000/ST6000DM003-2CY186/624E07A01FE2 b/HDD/Seagate/ST6000/ST6000DM003-2CY186/624E07A01FE2 new file mode 100644 index 000000000..22a56003f --- /dev/null +++ b/HDD/Seagate/ST6000/ST6000DM003-2CY186/624E07A01FE2 @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate BarraCuda 3.5 +Device Model: ST6000DM003-2CY186 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:07 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 689) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 079 064 006 - 85043459 + 3 Spin_Up_Time PO---- 093 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 99 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 090 060 045 - 1010237261 + 9 Power_On_Hours -O--CK 086 086 000 - 12646 (47 165 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 99 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 063 048 040 - 37 (Min/Max 33/38) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 453 +193 Load_Cycle_Count -O--CK 100 100 000 - 745 +194 Temperature_Celsius -O---K 037 052 000 - 37 (0 24 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 079 064 000 - 85043459 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 12542h+43m+00.317s +241 Total_LBAs_Written ------ 100 253 000 - 32855049231 +242 Total_LBAs_Read ------ 100 253 000 - 194231376514 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 33/38 Celsius +Lifetime Min/Max Temperature: 24/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (66) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 99 --- Lifetime Power-On Resets +0x01 0x010 4 12646 --- Power-on Hours +0x01 0x018 6 32855997687 --- Logical Sectors Written +0x01 0x020 6 755188189 --- Number of Write Commands +0x01 0x028 6 194337043606 --- Logical Sectors Read +0x01 0x030 6 2657199476 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 12642 --- Spindle Motor Power-on Hours +0x03 0x010 4 12616 --- Head Flying Hours +0x03 0x018 4 745 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 453 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 36 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 48 --- Highest Average Short Term Temperature +0x05 0x038 1 34 --- Lowest Average Short Term Temperature +0x05 0x040 1 44 --- Highest Average Long Term Temperature +0x05 0x048 1 35 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 100 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 346 --- Number of Hardware Resets +0x06 0x010 4 144 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 26 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST6000/ST6000DM003-2CY186/8CA0AB0FD830 b/HDD/Seagate/ST6000/ST6000DM003-2CY186/8CA0AB0FD830 new file mode 100644 index 000000000..7b2e2be7a --- /dev/null +++ b/HDD/Seagate/ST6000/ST6000DM003-2CY186/8CA0AB0FD830 @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate BarraCuda 3.5 +Device Model: ST6000DM003-2CY186 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:10 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 734) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 083 064 006 - 220099978 + 3 Spin_Up_Time PO---- 094 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 115 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 090 060 045 - 993982977 + 9 Power_On_Hours -O--CK 086 086 000 - 12646 (224 43 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 115 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 047 040 - 41 (Min/Max 37/42) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 499 +193 Load_Cycle_Count -O--CK 100 100 000 - 767 +194 Temperature_Celsius -O---K 041 053 000 - 41 (0 26 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 083 064 000 - 220099978 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 12538h+10m+45.168s +241 Total_LBAs_Written ------ 100 253 000 - 32762216389 +242 Total_LBAs_Read ------ 100 253 000 - 182466294996 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 37/42 Celsius +Lifetime Min/Max Temperature: 26/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (95) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 115 --- Lifetime Power-On Resets +0x01 0x010 4 12646 --- Power-on Hours +0x01 0x018 6 32761724853 --- Logical Sectors Written +0x01 0x020 6 754954730 --- Number of Write Commands +0x01 0x028 6 182422629203 --- Logical Sectors Read +0x01 0x030 6 2616673511 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 12638 --- Spindle Motor Power-on Hours +0x03 0x010 4 12610 --- Head Flying Hours +0x03 0x018 4 767 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 499 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 35 --- Lowest Average Short Term Temperature +0x05 0x040 1 45 --- Highest Average Long Term Temperature +0x05 0x048 1 36 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 60 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 251 --- Number of Hardware Resets +0x06 0x010 4 130 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST6000/ST6000DM003-2CY186/CE61EA71D8E7 b/HDD/Seagate/ST6000/ST6000DM003-2CY186/CE61EA71D8E7 new file mode 100644 index 000000000..16a2e6c29 --- /dev/null +++ b/HDD/Seagate/ST6000/ST6000DM003-2CY186/CE61EA71D8E7 @@ -0,0 +1,227 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate BarraCuda 3.5 +Device Model: ST6000DM003-2CY186 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:10 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 740) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 074 064 006 - 25722442 + 3 Spin_Up_Time PO---- 093 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 116 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 090 060 045 - 997588884 + 9 Power_On_Hours -O--CK 086 086 000 - 12646 (12 41 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 116 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 1 1 2 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 062 051 040 - 38 (Min/Max 35/40) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 499 +193 Load_Cycle_Count -O--CK 100 100 000 - 763 +194 Temperature_Celsius -O---K 038 049 000 - 38 (0 26 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 074 064 000 - 25722442 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 12 +240 Head_Flying_Hours ------ 100 253 000 - 12533h+04m+12.066s +241 Total_LBAs_Written ------ 100 253 000 - 32777438565 +242 Total_LBAs_Read ------ 100 253 000 - 189131068561 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 00% 1839 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 35/40 Celsius +Lifetime Min/Max Temperature: 26/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (98) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 116 --- Lifetime Power-On Resets +0x01 0x010 4 12646 --- Power-on Hours +0x01 0x018 6 32778865965 --- Logical Sectors Written +0x01 0x020 6 756633346 --- Number of Write Commands +0x01 0x028 6 189082202520 --- Logical Sectors Read +0x01 0x030 6 2582881911 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 12638 --- Spindle Motor Power-on Hours +0x03 0x010 4 12610 --- Head Flying Hours +0x03 0x018 4 763 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 499 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 37 --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 33 --- Lowest Average Short Term Temperature +0x05 0x040 1 42 --- Highest Average Long Term Temperature +0x05 0x048 1 35 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 100 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 220 --- Number of Hardware Resets +0x06 0x010 4 130 --- Number of ASR Events +0x06 0x018 4 12 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST6000/ST6000DM003-2CY186/F2E81606AEAF b/HDD/Seagate/ST6000/ST6000DM003-2CY186/F2E81606AEAF new file mode 100644 index 000000000..c412befb1 --- /dev/null +++ b/HDD/Seagate/ST6000/ST6000DM003-2CY186/F2E81606AEAF @@ -0,0 +1,227 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate BarraCuda 3.5 +Device Model: ST6000DM003-2CY186 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:07 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 693) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 083 064 006 - 217824112 + 3 Spin_Up_Time PO---- 093 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 99 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 090 060 045 - 1009918256 + 9 Power_On_Hours -O--CK 086 086 000 - 12646 (142 119 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 99 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 046 040 - 39 (Min/Max 35/41) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 449 +193 Load_Cycle_Count -O--CK 100 100 000 - 742 +194 Temperature_Celsius -O---K 039 054 000 - 39 (0 24 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 083 064 000 - 217824112 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 12544h+03m+51.855s +241 Total_LBAs_Written ------ 100 253 000 - 38156488705 +242 Total_LBAs_Read ------ 100 253 000 - 193075787082 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Aborted by host 70% 412 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 35/41 Celsius +Lifetime Min/Max Temperature: 24/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (67) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 99 --- Lifetime Power-On Resets +0x01 0x010 4 12646 --- Power-on Hours +0x01 0x018 6 38157680449 --- Logical Sectors Written +0x01 0x020 6 777269765 --- Number of Write Commands +0x01 0x028 6 193389218288 --- Logical Sectors Read +0x01 0x030 6 2608833736 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 12642 --- Spindle Motor Power-on Hours +0x03 0x010 4 12616 --- Head Flying Hours +0x03 0x018 4 742 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 449 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 38 --- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 51 --- Highest Average Short Term Temperature +0x05 0x038 1 36 --- Lowest Average Short Term Temperature +0x05 0x040 1 46 --- Highest Average Long Term Temperature +0x05 0x048 1 37 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 80 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 343 --- Number of Hardware Resets +0x06 0x010 4 137 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 26 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST6000/ST6000VN0041-2EL11C/154E6EB2018D b/HDD/Seagate/ST6000/ST6000VN0041-2EL11C/154E6EB2018D new file mode 100644 index 000000000..19801a2a2 --- /dev/null +++ b/HDD/Seagate/ST6000/ST6000VN0041-2EL11C/154E6EB2018D @@ -0,0 +1,229 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST6000VN0041-2EL11C +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC61 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Oct 4 21:39:55 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +Warning! SMART Attribute Data Structure error: invalid SMART checksum. +Read SMART Thresholds failed: Input/output error + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 575) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 580) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 077 064 --- - 47440272 + 3 Spin_Up_Time PO---- 085 085 --- - 0 + 4 Start_Stop_Count -O--CK 099 099 --- - 2045 + 5 Reallocated_Sector_Ct PO--CK 100 100 --- - 0 + 7 Seek_Error_Rate POSR-- 078 060 --- - 61433972 + 9 Power_On_Hours -O--CK 067 067 --- - 29183 (168 73 0) + 10 Spin_Retry_Count PO--C- 100 100 --- - 0 + 12 Power_Cycle_Count -O--CK 100 100 --- - 23 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 096 092 --- - 111670853706 +189 High_Fly_Writes -O-RCK 100 100 --- - 0 +190 Airflow_Temperature_Cel -O---K 071 049 --- - 29 (Min/Max 26/49) +191 G-Sense_Error_Rate -O--CK 100 100 --- - 1163 +192 Power-Off_Retract_Count -O--CK 100 100 --- - 2 +193 Load_Cycle_Count -O--CK 099 099 --- - 3466 +194 Temperature_Celsius -O---K 029 051 --- - 29 (0 22 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 005 002 --- - 47440272 +197 Current_Pending_Sector -O--C- 100 100 --- - 0 +198 Offline_Uncorrectable ----C- 100 100 --- - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 --- - 0 +240 Head_Flying_Hours ------ 100 253 --- - 693 (97 26 0) +241 Total_LBAs_Written ------ 100 253 --- - 18258569095 +242 Total_LBAs_Read ------ 100 253 --- - 5575684530 +255 Unknown_Attribute ------+ 239 000 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 25/49 Celsius +Lifetime Min/Max Temperature: 21/51 Celsius +Under/Over Temperature Limit Count: 0/1274 + +Write SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +Unexpected SCT status 0x0000 (action_code=0, function_code=0) +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 29183 --- Power-on Hours +0x01 0x018 6 18258569095 --- Logical Sectors Written +0x01 0x020 6 73422678 --- Number of Write Commands +0x01 0x028 6 5575684530 --- Logical Sectors Read +0x01 0x030 6 22463912 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1140240084 N-- Spindle Motor Power-on Hours +0x03 0x010 4 1140239903 N-- Head Flying Hours +0x03 0x018 4 3466 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 2 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 76 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 64 NDC+ Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 2422 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 547 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST8000/ST8000AS0002-1NA17Z/69C43C53CDF6 b/HDD/Seagate/ST8000/ST8000AS0002-1NA17Z/69C43C53CDF6 new file mode 100644 index 000000000..0b640812b --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000AS0002-1NA17Z/69C43C53CDF6 @@ -0,0 +1,200 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Archive HDD +Device Model: ST8000AS0002-1NA17Z +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: AR15 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5980 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:17:16 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 955) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 099 006 - 1862360 + 3 Spin_Up_Time PO---- 091 090 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 41 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 076 060 030 - 39015275865 + 9 Power_On_Hours -O--CK 060 060 000 - 35500 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 41 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 4295032836 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 064 051 045 - 36 (Min/Max 33/38) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 40 +193 Load_Cycle_Count -O--CK 099 099 000 - 2445 +194 Temperature_Celsius -O---K 036 049 000 - 36 (0 9 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 100 099 000 - 1862360 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 3 +240 Head_Flying_Hours ------ 100 253 000 - 2333 (162 124 0) +241 Total_LBAs_Written ------ 100 253 000 - 107534579429 +242 Total_LBAs_Read ------ 100 253 000 - 168611456241 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 8 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 8 Write stream error log +0x22 GPL R/O 8 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65528 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xd1 GPL VS 80 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xda GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 33/39 Celsius +Lifetime Min/Max Temperature: 9/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (31) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x010 4 35500 --- Power-on Hours +0x01 0x018 6 107527139832 --- Logical Sectors Written +0x01 0x020 6 561151663 --- Number of Write Commands +0x01 0x028 6 168611273418 --- Logical Sectors Read +0x01 0x030 6 356602784 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 34675 --- Spindle Motor Power-on Hours +0x03 0x010 4 166 --- Head Flying Hours +0x03 0x018 4 2445 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x1f8 7 2 --- Unknown +0x04 ===== = = === == General Errors Statistics (empty) == +0x05 ===== = = === == Temperature Statistics (empty) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000AS0002-1NA17Z/B722602D88A7 b/HDD/Seagate/ST8000/ST8000AS0002-1NA17Z/B722602D88A7 new file mode 100644 index 000000000..1c363a77d --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000AS0002-1NA17Z/B722602D88A7 @@ -0,0 +1,200 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Archive HDD +Device Model: ST8000AS0002-1NA17Z +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: AR15 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5980 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:17:17 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 945) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 126035704 + 3 Spin_Up_Time PO---- 091 090 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 41 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 082 060 030 - 8960813779 + 9 Power_On_Hours -O--CK 060 060 000 - 35501 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 41 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 050 050 000 - 50 +190 Airflow_Temperature_Cel -O---K 066 050 045 - 34 (Min/Max 32/37) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 77 +193 Load_Cycle_Count -O--CK 099 099 000 - 2377 +194 Temperature_Celsius -O---K 034 050 000 - 34 (0 9 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 117 099 000 - 126035704 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 3647 (188 97 0) +241 Total_LBAs_Written ------ 100 253 000 - 107285956148 +242 Total_LBAs_Read ------ 100 253 000 - 190079231822 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 8 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 8 Write stream error log +0x22 GPL R/O 8 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65528 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xd1 GPL VS 80 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xda GPL,SL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 32/37 Celsius +Lifetime Min/Max Temperature: 8/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (68) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 41 --- Lifetime Power-On Resets +0x01 0x010 4 35501 --- Power-on Hours +0x01 0x018 6 107278356818 --- Logical Sectors Written +0x01 0x020 6 611833063 --- Number of Write Commands +0x01 0x028 6 190078999950 --- Logical Sectors Read +0x01 0x030 6 356331982 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 34676 --- Spindle Motor Power-on Hours +0x03 0x010 4 279 --- Head Flying Hours +0x03 0x018 4 2377 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x1f8 7 0 --- Unknown +0x04 ===== = = === == General Errors Statistics (empty) == +0x05 ===== = = === == Temperature Statistics (empty) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000AS0002-1NA17Z/DFDD7A54E24B b/HDD/Seagate/ST8000/ST8000AS0002-1NA17Z/DFDD7A54E24B new file mode 100644 index 000000000..30ddc3e71 --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000AS0002-1NA17Z/DFDD7A54E24B @@ -0,0 +1,213 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Archive HDD +Device Model: ST8000AS0002-1NA17Z +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: AR13 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5980 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 17:48:29 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 948) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 111 099 006 - 29627776 + 3 Spin_Up_Time PO---- 091 091 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 53 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 076 060 030 - 52173536633 + 9 Power_On_Hours -O--CK 071 071 000 - 26082 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 38 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 4295032833 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 053 045 - 39 (Min/Max 24/41) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 422 +193 Load_Cycle_Count -O--CK 099 099 000 - 2376 +194 Temperature_Celsius -O---K 039 047 000 - 39 (0 9 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 111 099 000 - 29627776 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 11399 (229 195 0) +241 Total_LBAs_Written ------ 100 253 000 - 35040178107 +242 Total_LBAs_Read ------ 100 253 000 - 842645180387 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 8 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 8 Write stream error log +0x22 GPL R/O 8 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65528 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xd1 GPL VS 80 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 24/41 Celsius +Lifetime Min/Max Temperature: 9/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (106) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 38 --- Lifetime Power-On Resets +0x01 0x010 4 26082 --- Power-on Hours +0x01 0x018 6 35040166971 --- Logical Sectors Written +0x01 0x020 6 169943533 --- Number of Write Commands +0x01 0x028 6 842645164189 --- Logical Sectors Read +0x01 0x030 6 2791923010 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 25814 --- Spindle Motor Power-on Hours +0x03 0x010 4 405 --- Head Flying Hours +0x03 0x018 4 2376 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 N-- Current Temperature +0x05 0x010 1 41 N-- Average Short Term Temperature +0x05 0x018 1 39 N-- Average Long Term Temperature +0x05 0x020 1 47 N-- Highest Temperature +0x05 0x028 1 9 N-- Lowest Temperature +0x05 0x030 1 41 N-- Highest Average Short Term Temperature +0x05 0x038 1 30 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 0 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000DM002-1YW112/9844B2BAF2E1 b/HDD/Seagate/ST8000/ST8000DM002-1YW112/9844B2BAF2E1 new file mode 100644 index 000000000..6c8ada181 --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000DM002-1YW112/9844B2BAF2E1 @@ -0,0 +1,228 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Desktop HDD.15 +Device Model: ST8000DM002-1YW112 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: DN01 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 14:23:42 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 567) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 704) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 084 064 044 - 225789568 + 3 Spin_Up_Time PO---- 087 084 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 148 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 089 060 045 - 887196422 + 9 Power_On_Hours -O--CK 060 060 000 - 35423 (72 217 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 146 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 1 1 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 054 040 - 39 (Min/Max 38/40) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 144 +193 Load_Cycle_Count -O--CK 100 100 000 - 412 +194 Temperature_Celsius -O---K 039 046 000 - 39 (0 19 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 021 001 000 - 225789568 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 35036h+12m+24.425s +241 Total_LBAs_Written ------ 100 253 000 - 124791651430 +242 Total_LBAs_Read ------ 100 253 000 - 247810009425 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 38/40 Celsius +Lifetime Min/Max Temperature: 19/46 Celsius +Under/Over Temperature Limit Count: 0/65 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (47) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 146 --- Lifetime Power-On Resets +0x01 0x010 4 35423 --- Power-on Hours +0x01 0x018 6 124793520022 --- Logical Sectors Written +0x01 0x020 6 1592927877 --- Number of Write Commands +0x01 0x028 6 247849398283 --- Logical Sectors Read +0x01 0x030 6 1769887042 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 35256 --- Spindle Motor Power-on Hours +0x03 0x010 4 12524 --- Head Flying Hours +0x03 0x018 4 412 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 144 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 38 --- Average Long Term Temperature +0x05 0x020 1 -64 NDC+ Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 130 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 667 --- Number of Hardware Resets +0x06 0x010 4 231 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000DM004-2CX188/5F0F1B8052B1 b/HDD/Seagate/ST8000/ST8000DM004-2CX188/5F0F1B8052B1 new file mode 100644 index 000000000..92b6a6ba0 --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000DM004-2CX188/5F0F1B8052B1 @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda Compute +Device Model: ST8000DM004-2CX188 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 14:35:48 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 964) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 064 006 - 112606720 + 3 Spin_Up_Time PO---- 093 093 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 47 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 074 060 045 - 25587631 + 9 Power_On_Hours -O--CK 092 092 000 - 7293 (155 40 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 47 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 048 040 - 41 (Min/Max 22/47) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 162 +193 Load_Cycle_Count -O--CK 100 100 000 - 238 +194 Temperature_Celsius -O---K 041 052 000 - 41 (0 20 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 081 064 000 - 112606720 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 3220 (146 194 0) +241 Total_LBAs_Written ------ 100 253 000 - 8181007137 +242 Total_LBAs_Read ------ 100 253 000 - 30199935029 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 22/47 Celsius +Lifetime Min/Max Temperature: 20/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (57) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 47 --- Lifetime Power-On Resets +0x01 0x010 4 7293 --- Power-on Hours +0x01 0x018 6 8410993168 --- Logical Sectors Written +0x01 0x020 6 30859196 --- Number of Write Commands +0x01 0x028 6 30540142483 --- Logical Sectors Read +0x01 0x030 6 148206323 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 7289 --- Spindle Motor Power-on Hours +0x03 0x010 4 3357 --- Head Flying Hours +0x03 0x018 4 238 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 162 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 41 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 44 --- Highest Average Short Term Temperature +0x05 0x038 1 34 --- Lowest Average Short Term Temperature +0x05 0x040 1 42 --- Highest Average Long Term Temperature +0x05 0x048 1 37 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 20 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000DM004-2CX188/7A3C847F61C7 b/HDD/Seagate/ST8000/ST8000DM004-2CX188/7A3C847F61C7 new file mode 100644 index 000000000..081351b5a --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000DM004-2CX188/7A3C847F61C7 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate BarraCuda 3.5 +Device Model: ST8000DM004-2CX188 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:17:18 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 986) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 082 064 006 - 165703533 + 3 Spin_Up_Time PO---- 092 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 25 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 080 060 045 - 91568282 + 9 Power_On_Hours -O--CK 088 088 000 - 11222 (250 231 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 25 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 0 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 048 040 - 41 (Min/Max 40/44) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 40 +193 Load_Cycle_Count -O--CK 100 100 000 - 919 +194 Temperature_Celsius -O---K 041 052 000 - 41 (0 25 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 082 064 000 - 165703533 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 892h+164m+54.176s +241 Total_LBAs_Written ------ 100 253 000 - 87305576448 +242 Total_LBAs_Read ------ 100 253 000 - 17391758363 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 40/45 Celsius +Lifetime Min/Max Temperature: 25/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (83) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 11222 --- Power-on Hours +0x01 0x018 6 87306878390 --- Logical Sectors Written +0x01 0x020 6 395692674 --- Number of Write Commands +0x01 0x028 6 17392498463 --- Logical Sectors Read +0x01 0x030 6 93166859 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 10703 --- Spindle Motor Power-on Hours +0x03 0x010 4 1882 --- Head Flying Hours +0x03 0x018 4 919 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 40 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 42 --- Average Short Term Temperature +0x05 0x018 1 42 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 49 --- Highest Average Short Term Temperature +0x05 0x038 1 36 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 39 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 120 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 45 --- Number of Hardware Resets +0x06 0x010 4 3 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST8000/ST8000DM004-2CX188/EA9DE68F3264 b/HDD/Seagate/ST8000/ST8000DM004-2CX188/EA9DE68F3264 new file mode 100644 index 000000000..13942a4c3 --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000DM004-2CX188/EA9DE68F3264 @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Barracuda Compute +Device Model: ST8000DM004-2CX188 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5425 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 1 06:54:21 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: (1004) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x30a5) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 064 006 - 0 + 3 Spin_Up_Time PO---- 094 092 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 77 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 081 060 045 - 115212813 + 9 Power_On_Hours -O--CK 081 081 000 - 17303 (35 171 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 76 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 063 050 040 - 37 (Min/Max 24/38) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 185 +193 Load_Cycle_Count -O--CK 094 094 000 - 13592 +194 Temperature_Celsius -O---K 037 050 000 - 37 (0 20 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 100 064 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 6624 (31 86 0) +241 Total_LBAs_Written ------ 100 253 000 - 16197976323 +242 Total_LBAs_Read ------ 100 253 000 - 202866993458 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 8160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xb0 GPL VS 9048 Device vendor specific log +0xbd GPL VS 8 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL,SL VS 16 Device vendor specific log +0xc3 GPL,SL VS 8 Device vendor specific log +0xc4 GPL,SL VS 24 Device vendor specific log +0xd1 GPL VS 264 Device vendor specific log +0xd3 GPL VS 1920 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 25/39 Celsius +Lifetime Min/Max Temperature: 20/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (47) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 76 --- Lifetime Power-On Resets +0x01 0x010 4 17303 --- Power-on Hours +0x01 0x018 6 16221091555 --- Logical Sectors Written +0x01 0x020 6 79026877 --- Number of Write Commands +0x01 0x028 6 202867071343 --- Logical Sectors Read +0x01 0x030 6 1008568894 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4113485791 N-- Spindle Motor Power-on Hours +0x03 0x010 4 4113475135 N-- Head Flying Hours +0x03 0x018 4 13592 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 185 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 7 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 60 --- Time in Under-Temperature +0x05 0x068 1 13 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 116 --- Number of Hardware Resets +0x06 0x010 4 18 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000VN004-2M2101/67C984B8F838 b/HDD/Seagate/ST8000/ST8000VN004-2M2101/67C984B8F838 new file mode 100644 index 000000000..f0f59f802 --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000VN004-2M2101/67C984B8F838 @@ -0,0 +1,243 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST8000VN004-2M2101 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 11 02:37:44 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 559) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 717) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 080 067 044 - 106538486 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 2 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 068 060 045 - 6526953 + 9 Power_On_Hours -O--CK 100 100 000 - 291 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 2 + 18 Unknown_Attribute PO-R-- 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 048 040 - 39 (Min/Max 33/50) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 +193 Load_Cycle_Count -O--CK 100 100 000 - 55 +194 Temperature_Celsius -O---K 039 052 000 - 39 (0 25 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 080 067 000 - 106538486 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 249 (161 179 0) +241 Total_LBAs_Written ------ 100 253 000 - 3580906032 +242 Total_LBAs_Read ------ 100 253 000 - 2878085535 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 768 Current Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 16320 Device vendor specific log +0xa4 GPL,SL VS 160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 8 Device vendor specific log +0xc3 GPL,SL VS 32 Device vendor specific log +0xc9 GPL,SL VS 8 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xcd GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 336 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 33/50 Celsius +Lifetime Min/Max Temperature: 25/52 Celsius +Under/Over Temperature Limit Count: 0/269 +SMART Status: 0xc24f (PASSED) +Vendor specific: +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 10/25 Celsius +Min/Max Temperature Limit: 5/70 Celsius +Temperature History Size (Index): 128 (38) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3580906032 --- Logical Sectors Written +0x01 0x020 6 24677953 --- Number of Write Commands +0x01 0x028 6 2878085535 --- Logical Sectors Read +0x01 0x030 6 15618754 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 291 --- Spindle Motor Power-on Hours +0x03 0x010 4 253 --- Head Flying Hours +0x03 0x018 4 55 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 1 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 32 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 38 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8 --- Number of Hardware Resets +0x06 0x010 4 2 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x010 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000VN004-2M2101/6DAD885F10CE b/HDD/Seagate/ST8000/ST8000VN004-2M2101/6DAD885F10CE new file mode 100644 index 000000000..0466fcfcc --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000VN004-2M2101/6DAD885F10CE @@ -0,0 +1,243 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST8000VN004-2M2101 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 11 02:37:46 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 567) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 740) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 084 066 044 - 235181622 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 2 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 068 060 045 - 6885203 + 9 Power_On_Hours -O--CK 100 100 000 - 291 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 2 + 18 Unknown_Attribute PO-R-- 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 062 051 040 - 38 (Min/Max 32/49) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 +193 Load_Cycle_Count -O--CK 100 100 000 - 54 +194 Temperature_Celsius -O---K 038 049 000 - 38 (0 25 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 084 066 000 - 235181622 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 249 (33 205 0) +241 Total_LBAs_Written ------ 100 253 000 - 3578319808 +242 Total_LBAs_Read ------ 100 253 000 - 3007685172 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 768 Current Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 16320 Device vendor specific log +0xa4 GPL,SL VS 160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 8 Device vendor specific log +0xc3 GPL,SL VS 32 Device vendor specific log +0xc9 GPL,SL VS 8 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xcd GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 336 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 31/49 Celsius +Lifetime Min/Max Temperature: 25/49 Celsius +Under/Over Temperature Limit Count: 0/272 +SMART Status: 0xc24f (PASSED) +Vendor specific: +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 10/25 Celsius +Min/Max Temperature Limit: 5/70 Celsius +Temperature History Size (Index): 128 (41) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3578319808 --- Logical Sectors Written +0x01 0x020 6 29811356 --- Number of Write Commands +0x01 0x028 6 3007685172 --- Logical Sectors Read +0x01 0x030 6 15219157 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 291 --- Spindle Motor Power-on Hours +0x03 0x010 4 253 --- Head Flying Hours +0x03 0x018 4 54 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 1 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 30 --- Lowest Temperature +0x05 0x030 1 45 --- Highest Average Short Term Temperature +0x05 0x038 1 37 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10 --- Number of Hardware Resets +0x06 0x010 4 2 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x010 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000VN004-2M2101/E35A38D25314 b/HDD/Seagate/ST8000/ST8000VN004-2M2101/E35A38D25314 new file mode 100644 index 000000000..ec0bed3dd --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000VN004-2M2101/E35A38D25314 @@ -0,0 +1,243 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST8000VN004-2M2101 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 11 02:37:42 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 567) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 739) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 075 065 044 - 30777056 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 2 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 068 060 045 - 6964674 + 9 Power_On_Hours -O--CK 100 100 000 - 291 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 2 + 18 Unknown_Attribute PO-R-- 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 060 049 040 - 40 (Min/Max 32/50) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 +193 Load_Cycle_Count -O--CK 100 100 000 - 54 +194 Temperature_Celsius -O---K 040 051 000 - 40 (0 25 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 075 065 000 - 30777056 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 249 (26 240 0) +241 Total_LBAs_Written ------ 100 253 000 - 3579000336 +242 Total_LBAs_Read ------ 100 253 000 - 3046533812 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 768 Current Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 16320 Device vendor specific log +0xa4 GPL,SL VS 160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 8 Device vendor specific log +0xc3 GPL,SL VS 32 Device vendor specific log +0xc9 GPL,SL VS 8 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xcd GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 336 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 32/50 Celsius +Lifetime Min/Max Temperature: 25/51 Celsius +Under/Over Temperature Limit Count: 0/272 +SMART Status: 0xc24f (PASSED) +Vendor specific: +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 10/25 Celsius +Min/Max Temperature Limit: 5/70 Celsius +Temperature History Size (Index): 128 (41) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3579000336 --- Logical Sectors Written +0x01 0x020 6 29743064 --- Number of Write Commands +0x01 0x028 6 3046533812 --- Logical Sectors Read +0x01 0x030 6 14085771 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 291 --- Spindle Motor Power-on Hours +0x03 0x010 4 253 --- Head Flying Hours +0x03 0x018 4 54 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 1 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 32 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 39 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10 --- Number of Hardware Resets +0x06 0x010 4 2 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x010 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000VN004-2M2101/F911C5601DC6 b/HDD/Seagate/ST8000/ST8000VN004-2M2101/F911C5601DC6 new file mode 100644 index 000000000..f4d03d3bf --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000VN004-2M2101/F911C5601DC6 @@ -0,0 +1,243 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST8000VN004-2M2101 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 11 02:37:43 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 567) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 743) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 075 064 044 - 34809280 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 2 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 068 060 045 - 6674993 + 9 Power_On_Hours -O--CK 100 100 000 - 291 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 2 + 18 Unknown_Attribute PO-R-- 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 050 040 - 39 (Min/Max 32/50) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 +193 Load_Cycle_Count -O--CK 100 100 000 - 53 +194 Temperature_Celsius -O---K 039 050 000 - 39 (0 25 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 075 064 000 - 34809280 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 249 (10 185 0) +241 Total_LBAs_Written ------ 100 253 000 - 3582190800 +242 Total_LBAs_Read ------ 100 253 000 - 3046381935 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 768 Current Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 16320 Device vendor specific log +0xa4 GPL,SL VS 160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 8 Device vendor specific log +0xc3 GPL,SL VS 32 Device vendor specific log +0xc9 GPL,SL VS 8 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xcd GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 336 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 32/50 Celsius +Lifetime Min/Max Temperature: 25/50 Celsius +Under/Over Temperature Limit Count: 0/272 +SMART Status: 0xc24f (PASSED) +Vendor specific: +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 10/25 Celsius +Min/Max Temperature Limit: 5/70 Celsius +Temperature History Size (Index): 128 (41) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3582190800 --- Logical Sectors Written +0x01 0x020 6 24719887 --- Number of Write Commands +0x01 0x028 6 3046381935 --- Logical Sectors Read +0x01 0x030 6 14112157 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 291 --- Spindle Motor Power-on Hours +0x03 0x010 4 253 --- Head Flying Hours +0x03 0x018 4 53 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 1 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 31 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 39 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8 --- Number of Hardware Resets +0x06 0x010 4 2 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x010 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000VN004-2M2101/FC4ABCCEDCE9 b/HDD/Seagate/ST8000/ST8000VN004-2M2101/FC4ABCCEDCE9 new file mode 100644 index 000000000..fb667ede1 --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000VN004-2M2101/FC4ABCCEDCE9 @@ -0,0 +1,243 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST8000VN004-2M2101 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 11 02:37:43 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 559) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 720) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 067 044 - 137790022 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 2 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 068 060 045 - 6875687 + 9 Power_On_Hours -O--CK 100 100 000 - 291 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 2 + 18 Unknown_Attribute PO-R-- 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 060 046 040 - 40 (Min/Max 33/51) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 +193 Load_Cycle_Count -O--CK 100 100 000 - 54 +194 Temperature_Celsius -O---K 040 054 000 - 40 (0 25 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 081 067 000 - 137790022 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 249 (55 102 0) +241 Total_LBAs_Written ------ 100 253 000 - 3577539480 +242 Total_LBAs_Read ------ 100 253 000 - 2911704524 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 768 Current Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 16320 Device vendor specific log +0xa4 GPL,SL VS 160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 8 Device vendor specific log +0xc3 GPL,SL VS 32 Device vendor specific log +0xc9 GPL,SL VS 8 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xcd GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 336 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 33/51 Celsius +Lifetime Min/Max Temperature: 25/54 Celsius +Under/Over Temperature Limit Count: 0/270 +SMART Status: 0xc24f (PASSED) +Vendor specific: +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 10/25 Celsius +Min/Max Temperature Limit: 5/70 Celsius +Temperature History Size (Index): 128 (39) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3577539480 --- Logical Sectors Written +0x01 0x020 6 29748309 --- Number of Write Commands +0x01 0x028 6 2911704524 --- Logical Sectors Read +0x01 0x030 6 15947918 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 291 --- Spindle Motor Power-on Hours +0x03 0x010 4 253 --- Head Flying Hours +0x03 0x018 4 54 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 1 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 32 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 39 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10 --- Number of Hardware Resets +0x06 0x010 4 2 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x010 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST8000/ST8000VN004-2M2101/FC9787765339 b/HDD/Seagate/ST8000/ST8000VN004-2M2101/FC9787765339 new file mode 100644 index 000000000..75b6d8799 --- /dev/null +++ b/HDD/Seagate/ST8000/ST8000VN004-2M2101/FC9787765339 @@ -0,0 +1,243 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate IronWolf +Device Model: ST8000VN004-2M2101 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: SC60 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 11 02:37:45 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 559) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 730) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x50bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 082 064 044 - 165984294 + 3 Spin_Up_Time PO---- 096 096 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 2 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-- 068 060 045 - 6982490 + 9 Power_On_Hours -O--CK 100 100 000 - 291 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 2 + 18 Unknown_Attribute PO-R-- 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 061 050 040 - 39 (Min/Max 31/50) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 +193 Load_Cycle_Count -O--CK 100 100 000 - 54 +194 Temperature_Celsius -O---K 039 050 000 - 39 (0 25 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 082 064 000 - 165984294 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 249 (160 158 0) +241 Total_LBAs_Written ------ 100 253 000 - 3578810304 +242 Total_LBAs_Read ------ 100 253 000 - 2939518404 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 768 Current Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 24 Device vendor specific log +0xa2 GPL VS 16320 Device vendor specific log +0xa4 GPL,SL VS 160 Device vendor specific log +0xa6 GPL VS 192 Device vendor specific log +0xa8-0xa9 GPL,SL VS 136 Device vendor specific log +0xab GPL VS 1 Device vendor specific log +0xad GPL VS 16 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xc1 GPL,SL VS 8 Device vendor specific log +0xc3 GPL,SL VS 32 Device vendor specific log +0xc9 GPL,SL VS 8 Device vendor specific log +0xca GPL,SL VS 16 Device vendor specific log +0xcd GPL,SL VS 8 Device vendor specific log +0xd1 GPL VS 336 Device vendor specific log +0xd2 GPL VS 10000 Device vendor specific log +0xd4 GPL VS 2048 Device vendor specific log +0xda GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 31/50 Celsius +Lifetime Min/Max Temperature: 25/50 Celsius +Under/Over Temperature Limit Count: 0/272 +SMART Status: 0xc24f (PASSED) +Vendor specific: +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 3 minutes +Temperature Logging Interval: 59 minutes +Min/Max recommended Temperature: 10/25 Celsius +Min/Max Temperature Limit: 5/70 Celsius +Temperature History Size (Index): 128 (41) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2 --- Lifetime Power-On Resets +0x01 0x010 4 291 --- Power-on Hours +0x01 0x018 6 3578810304 --- Logical Sectors Written +0x01 0x020 6 29559984 --- Number of Write Commands +0x01 0x028 6 2939518404 --- Logical Sectors Read +0x01 0x030 6 15086802 --- Number of Read Commands +0x01 0x038 6 - --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 291 --- Spindle Motor Power-on Hours +0x03 0x010 4 253 --- Head Flying Hours +0x03 0x018 4 54 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 1 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 30 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 38 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10 --- Number of Hardware Resets +0x06 0x010 4 2 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x010 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST9120/ST9120822AS/E0F734DE5274 b/HDD/Seagate/ST9120/ST9120822AS/E0F734DE5274 new file mode 100644 index 000000000..1d1cb5be8 --- /dev/null +++ b/HDD/Seagate/ST9120/ST9120822AS/E0F734DE5274 @@ -0,0 +1,180 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.0-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus 5400.3 +Device Model: ST9120822AS +Serial Number: -- +Firmware Version: 3.CDD +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Fri Oct 2 19:20:48 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 426) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 111) minutes. +SCT capabilities: (0x0001) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 098 006 - 142657268 + 3 Spin_Up_Time PO---- 099 099 085 - 0 + 4 Start_Stop_Count -O--CK 096 096 020 - 4508 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 084 060 030 - 9202688464 + 9 Power_On_Hours -O--CK 072 072 000 - 24693 + 10 Spin_Retry_Count PO--C- 100 100 034 - 0 + 12 Power_Cycle_Count -O--CK 096 096 020 - 4653 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 071 032 045 Past 29 (18 175 29 26 0) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1703 +193 Load_Cycle_Count -O--CK 001 001 000 - 707518 +194 Temperature_Celsius -O---K 029 068 000 - 29 (0 16 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 080 051 000 - 206917851 +197 Current_Pending_Sector -O--C- 100 100 000 - 4 +198 Offline_Uncorrectable ----C- 100 100 000 - 4 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 +202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory not supported + +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 SL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 SL R/O 1 NCQ Command Error log +0x11 SL R/O 1 SATA Phy Event Counters log +0x20 SL R/O 1 Streaming performance log [OBS-8] +0x21 SL R/O 1 Write stream error log +0x22 SL R/O 1 Read stream error log +0x23 SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f SL R/W 16 Host vendor specific log +0xa0 SL VS 1 Device vendor specific log +0xa1 SL VS 20 Device vendor specific log +0xa2 SL VS 101 Device vendor specific log +0xa8 SL VS 20 Device vendor specific log +0xa9 SL VS 1 Device vendor specific log +0xe0 SL R/W 1 SCT Command/Status +0xe1 SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 24691 - +# 2 Short offline Aborted by host 80% 24656 - +# 3 Short offline Aborted by host 40% 24656 - +# 4 Short offline Completed without error 00% 24656 - +# 5 Short offline Completed without error 00% 24655 - +# 6 Short offline Completed without error 00% 24655 - +# 7 Short offline Completed without error 00% 24648 - +# 8 Short offline Aborted by host 60% 24353 - +# 9 Extended offline Completed without error 00% 22419 - +#10 Short offline Completed without error 00% 22370 - +#11 Short offline Completed without error 00% 20741 - +#12 Short offline Completed without error 00% 19679 - +#13 Short offline Completed without error 00% 14930 - +#14 Short offline Completed without error 00% 11840 - +#15 Short offline Completed without error 00% 11823 - +#16 Short offline Completed without error 00% 249 - +#17 Short offline Completed without error 00% 1 - +#18 Short offline Completed without error 00% 1 - +#19 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 521 (0x0209) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x8002 2 0 Vendor specific +0x8003 2 1 Vendor specific +0x8004 2 0 Vendor specific + diff --git a/HDD/Seagate/ST9250/ST9250315AS/0CFBE508772F b/HDD/Seagate/ST9250/ST9250315AS/0CFBE508772F new file mode 100644 index 000000000..632b4c688 --- /dev/null +++ b/HDD/Seagate/ST9250/ST9250315AS/0CFBE508772F @@ -0,0 +1,344 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus 5400.6 +Device Model: ST9250315AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: D005DEM1 +User Capacity: 250,058,268,160 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sat Jul 4 19:43:11 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 70) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 119 082 006 - 229189474 + 3 Spin_Up_Time PO---- 099 099 085 - 0 + 4 Start_Stop_Count -O--CK 096 096 020 - 4461 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 084 060 030 - 310317624 + 9 Power_On_Hours -O--CK 082 082 000 - 15935 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 097 097 020 - 3959 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 001 001 000 - 36126 +188 Command_Timeout -O--CK 100 092 000 - 4295033387 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 054 034 045 Past 46 (Min/Max 25/48 #2636) +191 G-Sense_Error_Rate -O--CK 070 070 000 - 60080 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 117 +193 Load_Cycle_Count -O--CK 003 003 000 - 195322 +194 Temperature_Celsius -O---K 046 066 000 - 46 (255 255 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 050 043 000 - 229189474 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 13669 (71 76 0) +241 Total_LBAs_Written ------ 100 253 000 - 873337495 +242 Total_LBAs_Read ------ 100 253 000 - 177100018 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 34569 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 34569 [8] occurred at disk power-on lifetime: 13081 hours (545 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 03 00 13 00 ce 00 00 Error: UNC at LBA = 0x3001300ce = 12886147278 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:16.547 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:37:16.547 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:14.269 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:37:14.269 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:12.013 READ FPDMA QUEUED + +Error 34568 [7] occurred at disk power-on lifetime: 13081 hours (545 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 03 00 13 00 ce 00 00 Error: UNC at LBA = 0x3001300ce = 12886147278 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:14.269 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:37:14.269 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:12.013 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:37:12.012 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:09.768 READ FPDMA QUEUED + +Error 34567 [6] occurred at disk power-on lifetime: 13081 hours (545 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 03 00 13 00 ce 00 00 Error: UNC at LBA = 0x3001300ce = 12886147278 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:12.013 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:37:12.012 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:09.768 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:37:09.767 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:07.567 READ FPDMA QUEUED + +Error 34566 [5] occurred at disk power-on lifetime: 13081 hours (545 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 03 00 13 00 ce 00 00 Error: UNC at LBA = 0x3001300ce = 12886147278 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:07.567 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:37:07.567 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:05.375 READ FPDMA QUEUED + 61 00 00 00 08 00 5e 00 ed 00 c0 40 00 00:37:05.212 WRITE FPDMA QUEUED + 60 00 00 00 80 00 03 00 16 00 00 40 00 00:37:05.212 READ FPDMA QUEUED + +Error 34565 [4] occurred at disk power-on lifetime: 13081 hours (545 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 03 00 13 00 ce 00 00 Error: UNC at LBA = 0x3001300ce = 12886147278 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:05.375 READ FPDMA QUEUED + 61 00 00 00 08 00 5e 00 ed 00 c0 40 00 00:37:05.212 WRITE FPDMA QUEUED + 60 00 00 00 80 00 03 00 16 00 00 40 00 00:37:05.212 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:37:05.211 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:03.033 READ FPDMA QUEUED + +Error 34564 [3] occurred at disk power-on lifetime: 13081 hours (545 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 03 00 13 00 ce 00 00 Error: UNC at LBA = 0x3001300ce = 12886147278 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:03.033 READ FPDMA QUEUED + 61 00 00 00 08 00 5e 00 ed 00 c0 40 00 00:37:03.033 WRITE FPDMA QUEUED + 60 00 00 00 80 00 03 00 16 00 00 40 00 00:37:03.032 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:37:03.032 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:00.766 READ FPDMA QUEUED + +Error 34563 [2] occurred at disk power-on lifetime: 13081 hours (545 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 03 00 13 00 ce 00 00 Error: UNC at LBA = 0x3001300ce = 12886147278 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:37:00.766 READ FPDMA QUEUED + 61 00 00 00 08 00 5e 00 ed 00 c0 40 00 00:37:00.766 WRITE FPDMA QUEUED + 60 00 00 00 80 00 03 00 16 00 00 40 00 00:37:00.765 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:37:00.765 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:36:58.587 READ FPDMA QUEUED + +Error 34562 [1] occurred at disk power-on lifetime: 13081 hours (545 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 03 00 13 00 ce 00 00 Error: UNC at LBA = 0x3001300ce = 12886147278 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:36:58.587 READ FPDMA QUEUED + 61 00 00 00 08 00 5e 00 ed 00 c0 40 00 00:36:58.586 WRITE FPDMA QUEUED + 60 00 00 00 80 00 03 00 16 00 00 40 00 00:36:58.586 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:36:58.586 READ LOG EXT + 60 00 00 00 80 00 03 00 13 00 80 40 00 00:36:56.308 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 15872 - +# 2 Short offline Completed: read failure 90% 5943 201678 +# 3 Short offline Completed: read failure 90% 5762 203189 +# 4 Short offline Completed: read failure 90% 5537 201678 +# 5 Short offline Completed: read failure 90% 5319 203189 +# 6 Short offline Completed: read failure 90% 5072 201678 +# 7 Short offline Completed: read failure 70% 4244 187470533 +# 8 Short offline Completed: read failure 90% 3721 405921236 +# 9 Short offline Completed: read failure 90% 3517 405924706 +#10 Short offline Completed without error 00% 3394 - +#11 Short offline Completed without error 00% 2821 - +#12 Short offline Completed without error 00% 2422 - +#13 Short offline Completed without error 00% 1834 - +#14 Short offline Completed without error 00% 1758 - +#15 Short offline Completed without error 00% 1511 - +#16 Short offline Completed without error 00% 920 - +#17 Short offline Completed without error 00% 438 - +#18 Short offline Completed without error 00% 368 - +#19 Short offline Completed without error 00% 321 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 25/48 Celsius +Lifetime Min/Max Temperature: 15/51 Celsius +Specified Max Operating Temperature: 36 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (88) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST9250/ST9250410AS/B3B6F05C1619 b/HDD/Seagate/ST9250/ST9250410AS/B3B6F05C1619 new file mode 100644 index 000000000..48faa7fc1 --- /dev/null +++ b/HDD/Seagate/ST9250/ST9250410AS/B3B6F05C1619 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus 7200.4 +Device Model: ST9250410AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: D005SDM1 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Aug 26 20:19:31 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 54) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 167092453 + 3 Spin_Up_Time PO---- 100 100 085 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 423 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 083 060 030 - 217496029 + 9 Power_On_Hours -O--CK 062 062 000 - 33621 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 037 020 - 408 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 075 050 045 - 25 (Min/Max 23/26) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 51 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 13 +193 Load_Cycle_Count -O--CK 001 001 000 - 998452 +194 Temperature_Celsius -O---K 025 050 000 - 25 (0 7 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 045 037 000 - 167092453 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 30760 (55 26 0) +241 Total_LBAs_Written ------ 100 253 000 - 1250274298 +242 Total_LBAs_Read ------ 100 253 000 - 1813754411 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 23/26 Celsius +Lifetime Min/Max Temperature: 7/51 Celsius +Specified Max Operating Temperature: 25 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (85) + +SMART WRITE LOG does not return COUNT and LBA_LOW register +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST9250/ST9250827AS/AF6B37B2A0DD b/HDD/Seagate/ST9250/ST9250827AS/AF6B37B2A0DD new file mode 100644 index 000000000..c5f7f93d1 --- /dev/null +++ b/HDD/Seagate/ST9250/ST9250827AS/AF6B37B2A0DD @@ -0,0 +1,177 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus 5400.4 +Device Model: ST9250827AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 3.AHC +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Sep 16 11:45:04 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Unexpected SCT status 0xffff (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 426) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 93) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 + 3 Spin_Up_Time -O---- 099 099 000 - 0 + 4 Start_Stop_Count PO--CK 095 095 020 - 5415 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 069 060 030 - 51654401770 + 9 Power_On_Hours -O--CK 085 085 000 - 13558 + 10 Spin_Retry_Count PO--C- 100 100 034 - 0 + 12 Power_Cycle_Count PO--CK 097 097 020 - 3366 +184 End-to-End_Error PO--CK 100 253 097 - 0 +187 Reported_Uncorrect -O-RCK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 091 000 - 115965887641 +189 High_Fly_Writes -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 069 046 040 - 31 (Min/Max 14/54) +191 G-Sense_Error_Rate -O--CK 001 001 000 - 644379 +192 Power-Off_Retract_Count -O-RCK 100 100 000 - 1666 +193 Load_Cycle_Count -O--C- 001 001 000 - 407676 +194 Temperature_Celsius -O-RCK 031 054 000 - 31 (0 14 0 0 0) +195 Hardware_ECC_Recovered -OSRCK 057 051 000 - 4240715 +197 Current_Pending_Sector -O--CK 099 084 000 - 31 +198 Offline_Uncorrectable -OSRCK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 1 Device vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL,SL VS 101 Device vendor specific log +0xa8 GPL,SL VS 20 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer +0xff GPL - 23040 Reserved + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4 - +# 2 Short offline Completed without error 00% 3 - +# 3 Short offline Completed without error 00% 3 - +# 4 Short offline Completed without error 00% 2 - +# 5 Short offline Completed without error 00% 2 - +# 6 Short offline Completed without error 00% 2 - +# 7 Short offline Completed without error 00% 1 - +# 8 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 521 (0x0209) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 26/36 Celsius +Lifetime Min/Max Temperature: 15/54 Celsius +Specified Max Operating Temperature: 31 Celsius +Under/Over Temperature Limit Count: 0/1128 + +Another SCT command is executing, abort Read Data Table +(SCT ext_status_code 0xffff, action_code=4, function_code=2) +Read SCT Temperature History failed + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x8002 2 0 Vendor specific +0x8003 2 2 Vendor specific +0x8004 2 0 Vendor specific + + + diff --git a/HDD/Seagate/ST9500/ST9500325AS/FA3F52322C9D b/HDD/Seagate/ST9500/ST9500325AS/FA3F52322C9D new file mode 100644 index 000000000..e48234b6c --- /dev/null +++ b/HDD/Seagate/ST9500/ST9500325AS/FA3F52322C9D @@ -0,0 +1,207 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus 5400.6 +Device Model: ST9500325AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0001SDM1 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Tue Oct 20 16:43:54 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 147) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103b) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 83312045 + 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 397 + 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 107 + 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 163904339 + 9 Power_On_Hours 0x0032 038 038 000 Old_age Always - 54638 + 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 263 +184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 079 079 000 Old_age Always - 21 +188 Command_Timeout 0x0032 100 095 000 Old_age Always - 174 +189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0022 071 054 045 Old_age Always - 29 (Min/Max 27/38) +191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 2 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14 +193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 2175343 +194 Temperature_Celsius 0x0022 029 046 000 Old_age Always - 29 (0 18 0 0 0) +195 Hardware_ECC_Recovered 0x001a 044 031 000 Old_age Always - 83312045 +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +ATA Error Count: 21 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 21 occurred at disk power-on lifetime: 14522 hours (605 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 00 00 ff ff ff ef 00 24d+21:59:32.065 READ DMA EXT + 27 00 00 00 00 00 e0 00 24d+21:59:32.063 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 02 24d+21:59:32.055 IDENTIFY DEVICE + ef 03 46 00 00 00 a0 02 24d+21:59:32.047 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 e0 00 24d+21:59:32.023 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 20 occurred at disk power-on lifetime: 14522 hours (605 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 00 00 ff ff ff ef 00 24d+21:59:28.520 READ DMA EXT + 27 00 00 00 00 00 e0 00 24d+21:59:28.519 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 02 24d+21:59:28.511 IDENTIFY DEVICE + ef 03 46 00 00 00 a0 02 24d+21:59:28.503 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 e0 00 24d+21:59:28.475 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 19 occurred at disk power-on lifetime: 14522 hours (605 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 00 00 ff ff ff ef 00 24d+21:59:25.912 READ DMA EXT + 27 00 00 00 00 00 e0 00 24d+21:59:25.910 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 02 24d+21:59:25.902 IDENTIFY DEVICE + ef 03 46 00 00 00 a0 02 24d+21:59:25.895 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 e0 00 24d+21:59:25.878 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +Error 18 occurred at disk power-on lifetime: 14522 hours (605 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 00 00 ff ff ff ef 00 24d+21:59:13.705 READ DMA EXT + 25 00 00 ff ff ff ef 00 24d+21:59:13.643 READ DMA EXT + 25 00 00 ff ff ff ef 00 24d+21:59:13.623 READ DMA EXT + 25 00 80 ff ff ff ef 00 24d+21:59:10.573 READ DMA EXT + 25 00 00 ff ff ff ef 00 24d+21:59:08.402 READ DMA EXT + +Error 17 occurred at disk power-on lifetime: 14007 hours (583 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 00 00 ff ff ff ef 00 3d+10:17:08.578 READ DMA EXT + 27 00 00 00 00 00 e0 00 3d+10:17:08.576 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 a0 02 3d+10:17:08.551 IDENTIFY DEVICE + ef 03 46 00 00 00 a0 02 3d+10:17:08.504 SET FEATURES [Set transfer mode] + 27 00 00 00 00 00 e0 00 3d+10:17:08.412 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 21404 - +# 2 Short offline Completed without error 00% 21364 - +# 3 Short offline Completed without error 00% 21363 - +# 4 Short offline Completed without error 00% 17754 - +# 5 Short offline Completed without error 00% 17749 - +# 6 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/Seagate/ST9500/ST9500420AS/27E66007BD6A b/HDD/Seagate/ST9500/ST9500420AS/27E66007BD6A new file mode 100644 index 000000000..77213129c --- /dev/null +++ b/HDD/Seagate/ST9500/ST9500420AS/27E66007BD6A @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus 7200.4 +Device Model: ST9500420AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0003LVM1 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Aug 25 22:29:12 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 110) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103b) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 111 099 034 - 38686453 + 3 Spin_Up_Time PO---- 100 097 000 - 0 + 4 Start_Stop_Count -O--CK 096 096 020 - 4826 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 077 060 030 - 39069156104 + 9 Power_On_Hours -O--CK 079 079 000 - 18655 (169 78 0) + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 096 096 020 - 4448 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 098 098 000 - 2 +188 Command_Timeout -O--CK 100 100 000 - 1 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 062 049 045 - 38 (Min/Max 32/44) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 673 +192 Power-Off_Retract_Count -O--CK 085 085 000 - 30170 +193 Load_Cycle_Count -O--CK 001 001 000 - 533368 +194 Temperature_Celsius -O---K 038 051 000 - 38 (0 4 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 045 034 000 - 38686453 +196 Reallocated_Event_Count POSR-- 084 084 030 - 14622 (33621 0) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 13355 hours (556 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 0c e6 9c 97 00 00 Error: UNC at LBA = 0x0ce69c97 = 216439959 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 00 6c 55 60 40 00 00:00:09.188 READ FPDMA QUEUED + 60 00 00 00 08 00 00 00 6a fc 50 40 00 00:00:09.187 READ FPDMA QUEUED + 60 00 00 00 08 00 00 00 6a fc 78 40 00 00:00:09.187 READ FPDMA QUEUED + 60 00 00 00 08 00 00 00 6a fc d8 40 00 00:00:09.187 READ FPDMA QUEUED + 60 00 00 00 08 00 00 00 6a fc d0 40 00 00:00:09.186 READ FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 13355 hours (556 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 0c e6 9c 97 00 00 Error: UNC at LBA = 0x0ce69c97 = 216439959 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 08 00 00 0c e6 9c 90 40 00 00:00:06.545 READ FPDMA QUEUED + 60 00 00 00 08 00 00 0c 8a f8 10 40 00 00:00:06.544 READ FPDMA QUEUED + 60 00 00 00 08 00 00 00 18 5f 70 40 00 00:00:06.533 READ FPDMA QUEUED + 60 00 00 00 08 00 00 00 10 3e e0 40 00 00:00:06.533 READ FPDMA QUEUED + 60 00 00 00 08 00 00 00 6d 99 e8 40 00 00:00:06.532 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9467 - +# 2 Vendor (0x50) Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 32/43 Celsius +Lifetime Min/Max Temperature: 4/51 Celsius +Under/Over Temperature Limit Count: 0/161 +Vendor specific: +00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 11 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (44) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST9500/ST9500420AS/7D8C7F4F84D4 b/HDD/Seagate/ST9500/ST9500420AS/7D8C7F4F84D4 new file mode 100644 index 000000000..8e277f4c2 --- /dev/null +++ b/HDD/Seagate/ST9500/ST9500420AS/7D8C7F4F84D4 @@ -0,0 +1,323 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.0-RELEASE-p12 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus 7200.4 +Device Model: ST9500420AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: 0002SDM1 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Aug 20 12:36:17 2020 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 107) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 065 055 006 - 49850262 + 3 Spin_Up_Time PO---- 100 097 085 - 0 + 4 Start_Stop_Count -O--CK 098 098 020 - 2722 + 5 Reallocated_Sector_Ct PO--CK 076 076 036 - 511 + 7 Seek_Error_Rate POSR-- 066 060 030 - 4923814 + 9 Power_On_Hours -O--CK 064 064 000 - 32147 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 098 098 020 - 2400 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 001 001 000 - 51464 +188 Command_Timeout -O--CK 100 080 000 - 369373741160 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 076 034 045 Past 24 (0 10 25 15 0) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 1 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 0 +193 Load_Cycle_Count -O--CK 054 054 000 - 93950 +194 Temperature_Celsius -O---K 024 066 000 - 24 (0 15 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 038 038 000 - 49850262 +197 Current_Pending_Sector -O--C- 100 100 000 - 6 +198 Offline_Uncorrectable ----C- 100 100 000 - 6 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 28068 (246 137 0) +241 Total_LBAs_Written ------ 100 253 000 - 3969666928 +242 Total_LBAs_Read ------ 100 253 000 - 3545667774 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 17458 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 17458 [17] occurred at disk power-on lifetime: 23289 hours (970 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 00 00 38 00 00 Error: UNC at LBA = 0x07000038 = 117440568 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 07 00 00 00 40 00 7d+00:18:10.644 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 7d+00:18:10.643 READ LOG EXT + 60 00 00 01 00 00 00 07 00 00 00 40 00 7d+00:18:07.675 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 7d+00:18:07.631 READ LOG EXT + 60 00 00 01 00 00 00 07 00 00 00 40 00 7d+00:18:04.293 READ FPDMA QUEUED + +Error 17457 [16] occurred at disk power-on lifetime: 23289 hours (970 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 00 00 38 00 00 Error: UNC at LBA = 0x07000038 = 117440568 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 07 00 00 00 40 00 7d+00:18:07.675 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 7d+00:18:07.631 READ LOG EXT + 60 00 00 01 00 00 00 07 00 00 00 40 00 7d+00:18:04.293 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 7d+00:18:04.191 READ LOG EXT + 60 00 00 01 00 00 00 07 00 00 00 40 00 7d+00:18:00.929 READ FPDMA QUEUED + +Error 17456 [15] occurred at disk power-on lifetime: 23289 hours (970 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 00 00 38 00 00 Error: UNC at LBA = 0x07000038 = 117440568 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 07 00 00 00 40 00 7d+00:18:04.293 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 7d+00:18:04.191 READ LOG EXT + 60 00 00 01 00 00 00 07 00 00 00 40 00 7d+00:18:00.929 READ FPDMA QUEUED + 60 00 00 01 00 00 00 06 00 00 00 40 00 7d+00:17:58.263 READ FPDMA QUEUED + 60 00 00 01 00 00 00 05 00 00 00 40 00 7d+00:17:56.488 READ FPDMA QUEUED + +Error 17455 [14] occurred at disk power-on lifetime: 23289 hours (970 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 00 00 38 00 00 Error: UNC at LBA = 0x07000038 = 117440568 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 07 00 00 00 40 00 7d+00:18:00.929 READ FPDMA QUEUED + 60 00 00 01 00 00 00 06 00 00 00 40 00 7d+00:17:58.263 READ FPDMA QUEUED + 60 00 00 01 00 00 00 05 00 00 00 40 00 7d+00:17:56.488 READ FPDMA QUEUED + 60 00 00 01 00 00 00 04 00 00 00 40 00 7d+00:17:54.086 READ FPDMA QUEUED + 60 00 00 01 00 00 00 03 00 00 00 40 00 7d+00:17:53.572 READ FPDMA QUEUED + +Error 17454 [13] occurred at disk power-on lifetime: 23289 hours (970 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 00 00 38 00 00 Error: UNC at LBA = 0x07000038 = 117440568 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 06 00 00 3f 40 00 7d+00:17:41.023 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 7d+00:17:41.022 READ LOG EXT + 60 00 00 01 00 00 00 06 00 00 3f 40 00 7d+00:17:35.801 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 7d+00:17:35.757 READ LOG EXT + 60 00 00 01 00 00 00 06 00 00 3f 40 00 7d+00:17:30.959 READ FPDMA QUEUED + +Error 17453 [12] occurred at disk power-on lifetime: 23289 hours (970 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 00 00 38 00 00 Error: UNC at LBA = 0x07000038 = 117440568 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 06 00 00 3f 40 00 7d+00:17:35.801 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 7d+00:17:35.757 READ LOG EXT + 60 00 00 01 00 00 00 06 00 00 3f 40 00 7d+00:17:30.959 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 7d+00:17:30.856 READ LOG EXT + 60 00 00 01 00 00 00 06 00 00 3f 40 00 7d+00:17:25.857 READ FPDMA QUEUED + +Error 17452 [11] occurred at disk power-on lifetime: 23289 hours (970 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 00 00 38 00 00 Error: UNC at LBA = 0x07000038 = 117440568 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 06 00 00 3f 40 00 7d+00:17:25.857 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 00 00 7d+00:17:25.856 READ LOG EXT + 60 00 00 01 00 00 00 06 00 00 3f 40 00 7d+00:17:21.010 READ FPDMA QUEUED + 60 00 00 01 00 00 00 05 00 00 3f 40 00 7d+00:17:18.658 READ FPDMA QUEUED + 60 00 00 01 00 00 00 04 00 00 3f 40 00 7d+00:17:16.034 READ FPDMA QUEUED + +Error 17451 [10] occurred at disk power-on lifetime: 23289 hours (970 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 07 00 00 38 00 00 Error: UNC at LBA = 0x07000038 = 117440568 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 01 00 00 00 06 00 00 3f 40 00 7d+00:17:21.010 READ FPDMA QUEUED + 60 00 00 01 00 00 00 05 00 00 3f 40 00 7d+00:17:18.658 READ FPDMA QUEUED + 60 00 00 01 00 00 00 04 00 00 3f 40 00 7d+00:17:16.034 READ FPDMA QUEUED + 60 00 00 01 00 00 00 03 00 00 3f 40 00 7d+00:17:15.026 READ FPDMA QUEUED + 60 00 00 01 00 00 00 02 00 00 3f 40 00 7d+00:17:14.859 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 21/24 Celsius +Lifetime Min/Max Temperature: 17/49 Celsius +Specified Max Operating Temperature: 24 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 14/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 128 (69) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST9500/ST9500530NS 42D0743 42D0746IBM/308EC2C76BCC b/HDD/Seagate/ST9500/ST9500530NS 42D0743 42D0746IBM/308EC2C76BCC new file mode 100644 index 000000000..4de02f7df --- /dev/null +++ b/HDD/Seagate/ST9500/ST9500530NS 42D0743 42D0746IBM/308EC2C76BCC @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ST9500530NS 42D0743 42D0746IBM +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: BE16 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Sep 7 14:43:00 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 650) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 120) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 078 063 044 - 67776367 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 135 + 5 Reallocated_Sector_Ct PO--CK 098 098 036 - 95 + 7 Seek_Error_Rate POSR-- 096 060 030 - 8129224651 + 9 Power_On_Hours -O--CK 094 011 000 - 5325 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 135 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 8590065666 +189 High_Fly_Writes -O-RCK 099 099 000 - 1 +190 Airflow_Temperature_Cel -O---K 076 051 045 - 24 (Min/Max 21/27) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 134 +193 Load_Cycle_Count -O--CK 100 100 000 - 135 +194 Temperature_Celsius -O---K 024 049 000 - 24 (0 12 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 035 022 000 - 67776367 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x12 GPL,SL R/O 1 SATA NCQ Non-Data log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short captive Completed without error 00% 7224 - +# 2 Short captive Completed without error 00% 51435 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 21/27 Celsius +Lifetime Min/Max Temperature: 12/49 Celsius +Under/Over Temperature Limit Count: 0/3006 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (76) + +SMART WRITE LOG does not return COUNT and LBA_LOW register +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Seagate/ST9500/ST9500530NS 42D0743 42D0746IBM/FB0959AEFCE8 b/HDD/Seagate/ST9500/ST9500530NS 42D0743 42D0746IBM/FB0959AEFCE8 new file mode 100644 index 000000000..2ec0a0548 --- /dev/null +++ b/HDD/Seagate/ST9500/ST9500530NS 42D0743 42D0746IBM/FB0959AEFCE8 @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ST9500530NS 42D0743 42D0746IBM +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: BE16 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Sep 7 14:42:54 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 659) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 117) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x103d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 081 063 044 - 131084268 + 3 Spin_Up_Time PO---- 100 100 000 - 0 + 4 Start_Stop_Count -O--CK 100 100 020 - 134 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 071 060 030 - 602984275806 + 9 Power_On_Hours -O--CK 094 011 000 - 5319 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 100 100 020 - 134 +184 End-to-End_Error -O--CK 100 100 099 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 8590065666 +189 High_Fly_Writes -O-RCK 043 043 000 - 57 +190 Airflow_Temperature_Cel -O---K 075 047 045 - 25 (Min/Max 21/28) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 133 +193 Load_Cycle_Count -O--CK 100 100 000 - 134 +194 Temperature_Celsius -O---K 025 053 000 - 25 (0 13 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 030 015 000 - 131084268 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 5 Comprehensive SMART error log +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x12 GPL,SL R/O 1 SATA NCQ Non-Data log +0x21 GPL,SL R/O 1 Write stream error log +0x22 GPL,SL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 129 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 252 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short captive Completed without error 00% 7218 - +# 2 Short captive Completed without error 00% 51431 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 21/28 Celsius +Lifetime Min/Max Temperature: 13/53 Celsius +Under/Over Temperature Limit Count: 0/3007 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 128 (124) + +SMART WRITE LOG does not return COUNT and LBA_LOW register +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + + + diff --git a/HDD/Seagate/ST9500/ST95005620AS/0A70373F7E3B b/HDD/Seagate/ST9500/ST95005620AS/0A70373F7E3B new file mode 100644 index 000000000..3b798163f --- /dev/null +++ b/HDD/Seagate/ST9500/ST95005620AS/0A70373F7E3B @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Seagate Momentus XT +Device Model: ST95005620AS +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: DEM4 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sat Jul 4 14:03:27 2020 EDT + +==> WARNING: These drives may corrupt large files, +see the following web pages for details: +http://knowledge.seagate.com/articles/en_US/FAQ/215451en +https://superuser.com/questions/313447/seagate-momentus-xt-corrupting-files-linux-and-mac + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 634) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 103) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x1007) SCT Status supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 106 099 006 - 11439093 + 3 Spin_Up_Time PO---- 097 097 085 - 0 + 4 Start_Stop_Count -O--CK 099 099 020 - 1827 + 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 + 7 Seek_Error_Rate POSR-- 079 060 030 - 93201453 + 9 Power_On_Hours -O--CK 091 091 000 - 8653 + 10 Spin_Retry_Count PO--C- 100 100 097 - 0 + 12 Power_Cycle_Count -O--CK 099 099 020 - 1944 +184 End-to-End_Error -O--CK 081 081 099 NOW 19 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 253 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 054 049 045 - 46 (Min/Max 35/46) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 334 +193 Load_Cycle_Count -O--CK 004 004 000 - 192929 +194 Temperature_Celsius -O---K 046 051 000 - 46 (0 11 0 0 0) +195 Hardware_ECC_Recovered -O-RC- 045 041 000 - 11439093 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +240 Head_Flying_Hours ------ 100 253 000 - 6170 (209 50 0) +241 Total_LBAs_Written ------ 100 253 000 - 3867060777 +242 Total_LBAs_Read ------ 100 253 000 - 1366994137 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 20 Device vendor specific log +0xa2 GPL VS 2248 Device vendor specific log +0xa8 GPL,SL VS 65 Device vendor specific log +0xa9 GPL,SL VS 1 Device vendor specific log +0xb0 GPL VS 2864 Device vendor specific log +0xbd GPL VS 1 Device vendor specific log +0xbe-0xbf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 522 (0x020a) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 35/46 Celsius +Lifetime Min/Max Temperature: 11/50 Celsius +Specified Max Operating Temperature: 34 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Data Table command not supported + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS + diff --git a/HDD/Toshiba/DT01/DT01ABA300/D61FA82F5082 b/HDD/Toshiba/DT01/DT01ABA300/D61FA82F5082 new file mode 100644 index 000000000..8321ca394 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ABA300/D61FA82F5082 @@ -0,0 +1,221 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ABA... Desktop HDD +Device Model: TOSHIBA DT01ABA300 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MZ6OABB0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5940 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Sep 2 23:11:33 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (26801) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 447) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 144 144 054 - 82 + 3 Spin_Up_Time POS--- 232 232 024 - 252 (Average 222) + 4 Start_Stop_Count -O--C- 099 099 000 - 5460 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 138 138 020 - 33 + 9 Power_On_Hours -O--C- 100 100 000 - 5578 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 5456 +192 Power-Off_Retract_Count -O--CK 096 096 000 - 5572 +193 Load_Cycle_Count -O--C- 096 096 000 - 5572 +194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 15/62) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 8 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5558 - +# 2 Short offline Completed without error 00% 5535 - +# 3 Short offline Completed without error 00% 5511 - +# 4 Short offline Completed without error 00% 5487 - +# 5 Short offline Completed without error 00% 5463 - +# 6 Short offline Completed without error 00% 5439 - +# 7 Short offline Completed without error 00% 5415 - +# 8 Short offline Completed without error 00% 5391 - +# 9 Short offline Completed without error 00% 5367 - +#10 Short offline Completed without error 00% 5343 - +#11 Short offline Completed without error 00% 5319 - +#12 Short offline Completed without error 00% 5295 - +#13 Short offline Completed without error 00% 5271 - +#14 Short offline Completed without error 00% 5247 - +#15 Short offline Completed without error 00% 5223 - +#16 Short offline Completed without error 00% 5199 - +#17 Short offline Completed without error 00% 5175 - +#18 Short offline Completed without error 00% 5151 - +#19 Short offline Completed without error 00% 5127 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 37/38 Celsius +Lifetime Min/Max Temperature: 15/62 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (6) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5456 --- Lifetime Power-On Resets +0x01 0x010 4 5578 --- Power-on Hours +0x01 0x018 6 43941599304 --- Logical Sectors Written +0x01 0x020 6 113674950 --- Number of Write Commands +0x01 0x028 6 33624956822 --- Logical Sectors Read +0x01 0x030 6 131931621 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5564 --- Spindle Motor Power-on Hours +0x03 0x010 4 5564 --- Head Flying Hours +0x03 0x018 4 5572 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 6 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 14 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 37 N-- Average Short Term Temperature +0x05 0x018 1 35 N-- Average Long Term Temperature +0x05 0x020 1 62 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 53 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 48 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 50 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 80738 --- Number of Hardware Resets +0x06 0x010 4 987 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 40 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 23 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Toshiba/DT01/DT01ACA050/6CA7DA67BE1E b/HDD/Toshiba/DT01/DT01ACA050/6CA7DA67BE1E new file mode 100644 index 000000000..f15bb3800 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA050/6CA7DA67BE1E @@ -0,0 +1,305 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA050 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS1OA750 +User Capacity: 500,103,634,432 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 14:11:31 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4836) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 81) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 137 137 054 - 88 + 3 Spin_Up_Time POS--- 105 105 024 - 216 (Average 220) + 4 Start_Stop_Count -O--C- 100 100 000 - 1535 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 108 108 020 - 37 + 9 Power_On_Hours -O--C- 099 099 000 - 8130 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1462 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1702 +193 Load_Cycle_Count -O--C- 099 099 000 - 1702 +194 Temperature_Celsius -O---- 230 230 000 - 26 (Min/Max 16/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 92 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 92 [3] occurred at disk power-on lifetime: 7704 hours (321 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 3a 38 3f b3 0a 00 Error: UNC at LBA = 0x3a383fb3 = 976764851 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 04 00 60 00 00 3a 38 3f b0 40 00 00:00:45.472 READ FPDMA QUEUED + 61 00 10 00 58 00 00 3a 38 36 10 40 00 00:00:45.470 WRITE FPDMA QUEUED + 61 00 10 00 50 00 00 3a 38 34 10 40 00 00:00:45.469 WRITE FPDMA QUEUED + 61 00 10 00 48 00 00 02 06 4a 10 40 00 00:00:45.469 WRITE FPDMA QUEUED + 60 00 10 00 40 00 00 3a 38 36 10 40 00 00:00:45.469 READ FPDMA QUEUED + +Error 91 [2] occurred at disk power-on lifetime: 7310 hours (304 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 3a 38 3f b3 0a 00 Error: UNC at LBA = 0x3a383fb3 = 976764851 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 04 00 38 00 00 3a 38 3f b0 40 00 21:01:04.184 READ FPDMA QUEUED + 60 00 01 00 30 00 00 3a 38 3f ee 40 00 21:01:04.184 READ FPDMA QUEUED + 60 00 01 00 28 00 00 3a 38 3f ee 40 00 21:01:04.177 READ FPDMA QUEUED + 60 00 e0 00 20 00 00 3a 38 36 20 40 00 21:01:04.176 READ FPDMA QUEUED + 60 00 e0 00 18 00 00 3a 38 34 20 40 00 21:01:04.176 READ FPDMA QUEUED + +Error 90 [1] occurred at disk power-on lifetime: 7291 hours (303 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 3a 38 3f ee 0a 00 Error: UNC at LBA = 0x3a383fee = 976764910 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 29 00 00 00 01 00 00 3a 38 3f ee 40 00 01:45:16.271 READ MULTIPLE EXT + 29 00 00 00 e0 00 00 3a 38 36 20 40 00 01:45:16.271 READ MULTIPLE EXT + 29 00 00 00 e0 00 00 3a 38 34 20 40 00 01:45:16.270 READ MULTIPLE EXT + c4 00 00 00 e0 00 00 00 06 4a 20 42 00 01:45:16.270 READ MULTIPLE + c4 00 00 00 e0 00 00 00 06 48 20 42 00 01:45:16.270 READ MULTIPLE + +Error 89 [0] occurred at disk power-on lifetime: 7291 hours (303 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 3a 38 3f ee 0a 00 Error: UNC at LBA = 0x3a383fee = 976764910 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 29 00 00 00 01 00 00 3a 38 3f ee 40 00 01:43:40.171 READ MULTIPLE EXT + 29 00 00 00 10 00 00 3a 38 36 10 40 00 01:43:40.171 READ MULTIPLE EXT + 29 00 00 00 10 00 00 3a 38 34 10 40 00 01:43:40.171 READ MULTIPLE EXT + c4 00 00 00 10 00 00 00 06 4a 10 42 00 01:43:40.171 READ MULTIPLE + 29 00 00 00 01 00 00 3a 38 3f ee 40 00 01:43:40.167 READ MULTIPLE EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8102 - +# 2 Short offline Completed without error 00% 8099 - +# 3 Short offline Completed without error 00% 8093 - +# 4 Short offline Completed without error 00% 8083 - +# 5 Short offline Completed without error 00% 8077 - +# 6 Short offline Completed without error 00% 8074 - +# 7 Short offline Completed without error 00% 8073 - +# 8 Short offline Completed without error 00% 8070 - +# 9 Short offline Completed without error 00% 8069 - +#10 Short offline Completed without error 00% 8057 - +#11 Short offline Completed without error 00% 8051 - +#12 Short offline Completed without error 00% 8034 - +#13 Short offline Completed without error 00% 8012 - +#14 Short offline Completed without error 00% 7996 - +#15 Short offline Completed without error 00% 7947 - +#16 Short offline Completed without error 00% 7906 - +#17 Short offline Completed without error 00% 7826 - +#18 Short offline Completed without error 00% 7119 - +#19 Short offline Completed without error 00% 7021 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 24/26 Celsius +Lifetime Min/Max Temperature: 16/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (122) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1462 --- Lifetime Power-On Resets +0x01 0x010 4 8130 --- Power-on Hours +0x01 0x018 6 12946921902 --- Logical Sectors Written +0x01 0x020 6 201097114 --- Number of Write Commands +0x01 0x028 6 209682170869 --- Logical Sectors Read +0x01 0x030 6 134620466 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8101 --- Spindle Motor Power-on Hours +0x03 0x010 4 8101 --- Head Flying Hours +0x03 0x018 4 1702 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 2 --- Read Recovery Attempts +0x03 0x030 4 9 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 716 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 17 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 30 N-- Average Short Term Temperature +0x05 0x018 1 29 N-- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 36 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 34 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 31793 --- Number of Hardware Resets +0x06 0x010 4 15209 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA050/A11CF896B9DD b/HDD/Toshiba/DT01/DT01ACA050/A11CF896B9DD new file mode 100644 index 000000000..d3d96d824 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA050/A11CF896B9DD @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA050 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS1OA750 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 4 17:03:56 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 3620) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 61) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 140 140 054 - 75 + 3 Spin_Up_Time POS--- 124 124 024 - 185 (Average 185) + 4 Start_Stop_Count -O--C- 100 100 000 - 204 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 118 118 020 - 33 + 9 Power_On_Hours -O--C- 096 096 000 - 30821 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 204 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 213 +193 Load_Cycle_Count -O--C- 100 100 000 - 213 +194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 14/52) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 24951 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 37/44 Celsius +Lifetime Min/Max Temperature: 14/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (53) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 204 --- Lifetime Power-On Resets +0x01 0x010 4 30821 --- Power-on Hours +0x01 0x018 6 85589908310 --- Logical Sectors Written +0x01 0x020 6 929163653 --- Number of Write Commands +0x01 0x028 6 71727487245 --- Logical Sectors Read +0x01 0x030 6 517761989 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 30817 --- Spindle Motor Power-on Hours +0x03 0x010 4 30817 --- Head Flying Hours +0x03 0x018 4 213 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 12 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 41 N-- Average Short Term Temperature +0x05 0x018 1 38 N-- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 50 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 46 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1247 --- Number of Hardware Resets +0x06 0x010 4 1037 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 26 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 26 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA050/B35064B67071 b/HDD/Toshiba/DT01/DT01ACA050/B35064B67071 new file mode 100644 index 000000000..065de28b4 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA050/B35064B67071 @@ -0,0 +1,221 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA050 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS1OA750 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 14 22:25:33 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4768) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 80) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 136 136 054 - 90 + 3 Spin_Up_Time POS--- 127 127 024 - 180 (Average 182) + 4 Start_Stop_Count -O--C- 100 100 000 - 183 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 113 113 020 - 35 + 9 Power_On_Hours -O--C- 091 091 000 - 63008 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 183 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 428 +193 Load_Cycle_Count -O--C- 100 100 000 - 428 +194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 13/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 55563 - +# 2 Short offline Completed without error 00% 55561 - +# 3 Short offline Completed without error 00% 55560 - +# 4 Short offline Completed without error 00% 41573 - +# 5 Short offline Completed without error 00% 41570 - +# 6 Short offline Completed without error 00% 41570 - +# 7 Short offline Completed without error 00% 39448 - +# 8 Short offline Completed without error 00% 39445 - +# 9 Short offline Completed without error 00% 39445 - +#10 Short offline Completed without error 00% 15807 - +#11 Short offline Completed without error 00% 15805 - +#12 Short offline Completed without error 00% 15804 - +#13 Extended offline Completed without error 00% 11857 - +#14 Short offline Completed without error 00% 8292 - +#15 Short offline Completed without error 00% 8290 - +#16 Short offline Completed without error 00% 8289 - +#17 Short offline Completed without error 00% 4 - +#18 Short offline Completed without error 00% 0 - +#19 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 20/47 Celsius +Lifetime Min/Max Temperature: 13/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (60) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 183 --- Lifetime Power-On Resets +0x01 0x010 4 63008 --- Power-on Hours +0x01 0x018 6 138355107696 --- Logical Sectors Written +0x01 0x020 6 733920249 --- Number of Write Commands +0x01 0x028 6 539145405588 --- Logical Sectors Read +0x01 0x030 6 2992461396 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 63000 --- Spindle Motor Power-on Hours +0x03 0x010 4 63000 --- Head Flying Hours +0x03 0x018 4 428 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 28 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 37 N-- Average Short Term Temperature +0x05 0x018 1 35 N-- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 15 N-- Lowest Average Short Term Temperature +0x05 0x040 1 35 N-- Highest Average Long Term Temperature +0x05 0x048 1 18 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 955 --- Number of Hardware Resets +0x06 0x010 4 513 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 59 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 44 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Toshiba/DT01/DT01ACA050/ECA3803B8643 b/HDD/Toshiba/DT01/DT01ACA050/ECA3803B8643 new file mode 100644 index 000000000..60afde549 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA050/ECA3803B8643 @@ -0,0 +1,223 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA050 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS1OA750 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 14:11:29 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 3426) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 57) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 143 143 054 - 67 + 3 Spin_Up_Time POS--- 125 125 024 - 182 (Average 185) + 4 Start_Stop_Count -O--C- 100 100 000 - 1510 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 110 110 020 - 36 + 9 Power_On_Hours -O--C- 099 099 000 - 8130 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1437 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1679 +193 Load_Cycle_Count -O--C- 099 099 000 - 1679 +194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 16/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8101 - +# 2 Short offline Completed without error 00% 8098 - +# 3 Short offline Completed without error 00% 8092 - +# 4 Short offline Completed without error 00% 8083 - +# 5 Short offline Completed without error 00% 8076 - +# 6 Short offline Completed without error 00% 8073 - +# 7 Short offline Completed without error 00% 8073 - +# 8 Short offline Completed without error 00% 8070 - +# 9 Short offline Completed without error 00% 8069 - +#10 Short offline Completed without error 00% 8056 - +#11 Short offline Completed without error 00% 8050 - +#12 Short offline Completed without error 00% 8033 - +#13 Short offline Completed without error 00% 8011 - +#14 Short offline Completed without error 00% 7995 - +#15 Short offline Completed without error 00% 7946 - +#16 Short offline Completed without error 00% 7906 - +#17 Short offline Completed without error 00% 7825 - +#18 Short offline Completed without error 00% 7119 - +#19 Short offline Completed without error 00% 7021 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 23/25 Celsius +Lifetime Min/Max Temperature: 16/40 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (97) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1437 --- Lifetime Power-On Resets +0x01 0x010 4 8130 --- Power-on Hours +0x01 0x018 6 12992704421 --- Logical Sectors Written +0x01 0x020 6 200351423 --- Number of Write Commands +0x01 0x028 6 215324068229 --- Logical Sectors Read +0x01 0x030 6 141550577 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8101 --- Spindle Motor Power-on Hours +0x03 0x010 4 8101 --- Head Flying Hours +0x03 0x018 4 1679 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 6 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 30 N-- Average Short Term Temperature +0x05 0x018 1 29 N-- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 36 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 34 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 27251 --- Number of Hardware Resets +0x06 0x010 4 10663 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA100/076EAC095BA6 b/HDD/Toshiba/DT01/DT01ACA100/076EAC095BA6 new file mode 100644 index 000000000..8a9a3c733 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA100/076EAC095BA6 @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Add. Product Id: DELL(tm) +Firmware Version: MS2OA810 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 17:30:42 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7507) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 126) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 65536 + 2 Throughput_Performance --S--- 142 142 000 - 69 + 3 Spin_Up_Time POS--- 127 127 024 - 182 (Average 180) + 4 Start_Stop_Count -O--C- 100 100 000 - 152 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 000 - 0 + 8 Seek_Time_Performance --S--- 110 110 000 - 36 + 9 Power_On_Hours -O--C- 098 098 000 - 17612 + 10 Spin_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 149 +192 Power-Off_Retract_Count -O--CK 097 097 000 - 3656 +193 Load_Cycle_Count -O--C- 097 097 000 - 3656 +194 Temperature_Celsius -O---- 125 125 000 - 44 (Min/Max 18/56) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 +240 Head_Flying_Hours -O--C- 098 098 000 - 17528 +241 Total_LBAs_Written -O--C- 100 100 000 - 124276678874 +242 Total_LBAs_Read -O--C- 100 100 000 - 12972652569 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 26/49 Celsius +Lifetime Min/Max Temperature: 18/56 Celsius +Specified Max Operating Temperature: 45 Celsius +Under/Over Temperature Limit Count: 0/54 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 15/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 478 (429) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 149 --- Lifetime Power-On Resets +0x01 0x010 4 17612 --- Power-on Hours +0x01 0x018 6 124276679978 --- Logical Sectors Written +0x01 0x020 6 2056053891 --- Number of Write Commands +0x01 0x028 6 33508548946 --- Logical Sectors Read +0x01 0x030 6 183662035 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 17528 --- Spindle Motor Power-on Hours +0x03 0x010 4 17528 --- Head Flying Hours +0x03 0x018 4 3656 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 44 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x010 1 45 N-- Average Short Term Temperature +0x05 0x018 1 46 N-- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 53 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 49 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 50 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 15 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1651 --- Number of Hardware Resets +0x06 0x010 4 1503 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA100/354F1BBE54B0 b/HDD/Toshiba/DT01/DT01ACA100/354F1BBE54B0 new file mode 100644 index 000000000..215e1e3b4 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA100/354F1BBE54B0 @@ -0,0 +1,235 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS2OA750 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 23 14:36:28 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7313) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 122) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 142 142 054 - 70 + 3 Spin_Up_Time POS--- 122 122 024 - 188 (Average 188) + 4 Start_Stop_Count -O--C- 099 099 000 - 5860 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 115 115 020 - 34 + 9 Power_On_Hours -O--C- 098 098 000 - 14992 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 5838 +192 Power-Off_Retract_Count -O--CK 096 096 000 - 5898 +193 Load_Cycle_Count -O--C- 096 096 000 - 5898 +194 Temperature_Celsius -O---- 133 133 000 - 45 (Min/Max 11/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 14106 hours (587 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 41 00 00 3e a1 7e e7 0e 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 2f 00 00 00 01 00 00 00 00 00 10 e0 00 02:38:46.214 READ LOG EXT + 60 01 00 00 20 00 00 3e a1 82 28 40 00 02:38:46.213 READ FPDMA QUEUED + 60 01 00 00 18 00 00 3e a1 81 28 40 00 02:38:46.212 READ FPDMA QUEUED + 60 01 00 00 10 00 00 3e a1 80 28 40 00 02:38:46.212 READ FPDMA QUEUED + 60 01 00 00 08 00 00 3e a1 7f 28 40 00 02:38:46.212 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 33/45 Celsius +Lifetime Min/Max Temperature: 11/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (66) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5838 --- Lifetime Power-On Resets +0x01 0x010 4 14992 --- Power-on Hours +0x01 0x018 6 45850557638 --- Logical Sectors Written +0x01 0x020 6 127975155 --- Number of Write Commands +0x01 0x028 6 378525049285 --- Logical Sectors Read +0x01 0x030 6 195744819 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 14965 --- Spindle Motor Power-on Hours +0x03 0x010 4 14965 --- Head Flying Hours +0x03 0x018 4 5898 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 44 --- Current Temperature +0x05 0x010 1 42 N-- Average Short Term Temperature +0x05 0x018 1 41 N-- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 11 --- Lowest Temperature +0x05 0x030 1 44 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 42 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 46220 --- Number of Hardware Resets +0x06 0x010 4 19879 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 72 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA100/49380A8B26C0 b/HDD/Toshiba/DT01/DT01ACA100/49380A8B26C0 new file mode 100644 index 000000000..578ae9627 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA100/49380A8B26C0 @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS2OA750 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 5 00:16:27 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7313) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 122) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 142 142 054 - 71 + 3 Spin_Up_Time POS--- 143 143 024 - 180 (Average 140) + 4 Start_Stop_Count -O--C- 100 100 000 - 1749 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 115 115 020 - 34 + 9 Power_On_Hours -O--C- 099 099 000 - 12074 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1748 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1820 +193 Load_Cycle_Count -O--C- 099 099 000 - 1820 +194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 25/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1665 - +# 2 Short offline Completed without error 00% 1550 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 30/36 Celsius +Lifetime Min/Max Temperature: 25/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (125) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1748 --- Lifetime Power-On Resets +0x01 0x010 4 12074 --- Power-on Hours +0x01 0x018 6 15202530420 --- Logical Sectors Written +0x01 0x020 6 231473589 --- Number of Write Commands +0x01 0x028 6 473759490632 --- Logical Sectors Read +0x01 0x030 6 224855263 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 12070 --- Spindle Motor Power-on Hours +0x03 0x010 4 12070 --- Head Flying Hours +0x03 0x018 4 1820 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 11 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 11 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 34 N-- Average Short Term Temperature +0x05 0x018 1 35 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 37 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 20267 --- Number of Hardware Resets +0x06 0x010 4 8596 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 46 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 27 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA100/5379E13728D9 b/HDD/Toshiba/DT01/DT01ACA100/5379E13728D9 new file mode 100644 index 000000000..57bfc3946 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA100/5379E13728D9 @@ -0,0 +1,223 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS2OA750 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 13 13:48:19 2020 HKT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7216) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 121) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 142 142 054 - 69 + 3 Spin_Up_Time POS--- 119 119 024 - 193 (Average 193) + 4 Start_Stop_Count -O--C- 100 100 000 - 2852 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 110 110 020 - 36 + 9 Power_On_Hours -O--C- 097 097 000 - 21273 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2843 +192 Power-Off_Retract_Count -O--CK 098 098 000 - 3328 +193 Load_Cycle_Count -O--C- 098 098 000 - 3328 +194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 7/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 18857 - +# 2 Short offline Completed without error 00% 18851 - +# 3 Short offline Completed without error 00% 18832 - +# 4 Short offline Completed without error 00% 18819 - +# 5 Short offline Completed without error 00% 18802 - +# 6 Short offline Completed without error 00% 18791 - +# 7 Extended offline Interrupted (host reset) 30% 18652 - +# 8 Short offline Completed without error 00% 18620 - +# 9 Short offline Completed without error 00% 18605 - +#10 Short offline Completed without error 00% 18594 - +#11 Short offline Completed without error 00% 18588 - +#12 Short offline Completed without error 00% 18584 - +#13 Extended offline Interrupted (host reset) 60% 18576 - +#14 Short offline Completed without error 00% 18546 - +#15 Short offline Completed without error 00% 18536 - +#16 Short offline Completed without error 00% 18532 - +#17 Short offline Completed without error 00% 18528 - +#18 Short offline Completed without error 00% 18520 - +#19 Short offline Completed without error 00% 18509 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 27/36 Celsius +Lifetime Min/Max Temperature: 7/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (87) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2843 --- Lifetime Power-On Resets +0x01 0x010 4 21273 --- Power-on Hours +0x01 0x018 6 38175653802 --- Logical Sectors Written +0x01 0x020 6 664171207 --- Number of Write Commands +0x01 0x028 6 224028887664 --- Logical Sectors Read +0x01 0x030 6 1299433240 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 21214 --- Spindle Motor Power-on Hours +0x03 0x010 4 21214 --- Head Flying Hours +0x03 0x018 4 3328 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 13 --- Read Recovery Attempts +0x03 0x030 4 12 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 21 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 7 --- Lowest Temperature +0x05 0x030 1 41 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 38 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6423 --- Number of Hardware Resets +0x06 0x010 4 3508 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 44 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 44 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA100/5DDD95389076 b/HDD/Toshiba/DT01/DT01ACA100/5DDD95389076 new file mode 100644 index 000000000..7d5fe0913 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA100/5DDD95389076 @@ -0,0 +1,202 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS2OA7L0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 07:59:52 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7264) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 121) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 142 142 054 - 70 + 3 Spin_Up_Time POS--- 127 127 024 - 180 (Average 180) + 4 Start_Stop_Count -O--C- 100 100 000 - 2179 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 115 115 020 - 34 + 9 Power_On_Hours -O--C- 098 098 000 - 19175 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2179 +192 Power-Off_Retract_Count -O--CK 098 098 000 - 2681 +193 Load_Cycle_Count -O--C- 098 098 000 - 2681 +194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 18/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 24/37 Celsius +Lifetime Min/Max Temperature: 18/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (23) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2179 --- Lifetime Power-On Resets +0x01 0x010 4 19175 --- Power-on Hours +0x01 0x018 6 7940761636 --- Logical Sectors Written +0x01 0x020 6 126587664 --- Number of Write Commands +0x01 0x028 6 1394759895845 --- Logical Sectors Read +0x01 0x030 6 80050701 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 19168 --- Spindle Motor Power-on Hours +0x03 0x010 4 19168 --- Head Flying Hours +0x03 0x018 4 2681 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 34 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 38 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 36 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7107 --- Number of Hardware Resets +0x06 0x010 4 4889 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Toshiba/DT01/DT01ACA100/AB871D5C2B2C b/HDD/Toshiba/DT01/DT01ACA100/AB871D5C2B2C new file mode 100644 index 000000000..15a9375ac --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA100/AB871D5C2B2C @@ -0,0 +1,208 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS2OA800 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 14 09:36:45 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7119) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 119) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 098 016 - 0 + 2 Throughput_Performance POS--K 142 100 054 - 68 + 3 Spin_Up_Time PO---K 169 100 024 - 105 (Average 166) + 4 Start_Stop_Count -O--CK 100 100 000 - 88 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-K 100 100 067 - 0 + 8 Seek_Time_Performance P-S--K 113 100 020 - 35 + 9 Power_On_Hours -O--CK 098 098 000 - 14564 + 10 Spin_Retry_Count PO--CK 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 68 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +185 Unknown_Attribute -O--CK 100 100 000 - 65535 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 099 000 - 2 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 064 062 000 - 36 (Min/Max 32/37) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 140 +193 Load_Cycle_Count -O--CK 100 100 000 - 140 +194 Temperature_Celsius -O---K 166 157 000 - 36 (Min/Max 17/38) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 32/37 Celsius +Lifetime Min/Max Temperature: 17/38 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (83) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 68 --- Lifetime Power-On Resets +0x01 0x010 4 14564 --- Power-on Hours +0x01 0x018 6 34811281413 --- Logical Sectors Written +0x01 0x020 6 753666336 --- Number of Write Commands +0x01 0x028 6 105138689194 --- Logical Sectors Read +0x01 0x030 6 585267576 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 14562 --- Spindle Motor Power-on Hours +0x03 0x010 4 14562 --- Head Flying Hours +0x03 0x018 4 140 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 8 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 36 N-- Highest Average Short Term Temperature +0x05 0x038 1 23 N-- Lowest Average Short Term Temperature +0x05 0x040 1 34 N-- Highest Average Long Term Temperature +0x05 0x048 1 23 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 858 --- Number of Hardware Resets +0x06 0x010 4 650 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Toshiba/DT01/DT01ACA100/EE47B719110C b/HDD/Toshiba/DT01/DT01ACA100/EE47B719110C new file mode 100644 index 000000000..2fc26b4ed --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA100/EE47B719110C @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS2OA750 +User Capacity: 1,000,203,804,160 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:11 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7069) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 118) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 142 142 054 - 70 + 3 Spin_Up_Time POS--- 099 099 024 - 235 (Average 226) + 4 Start_Stop_Count -O--C- 100 100 000 - 34 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 115 115 020 - 34 + 9 Power_On_Hours -O--C- 098 098 000 - 14479 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 34 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 585 +193 Load_Cycle_Count -O--C- 100 100 000 - 585 +194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 23/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 14314 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 35/38 Celsius +Lifetime Min/Max Temperature: 23/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (108) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 34 --- Lifetime Power-On Resets +0x01 0x010 4 14479 --- Power-on Hours +0x01 0x018 6 2222270161 --- Logical Sectors Written +0x01 0x020 6 17398258 --- Number of Write Commands +0x01 0x028 6 1079682638140 --- Logical Sectors Read +0x01 0x030 6 15776223 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 14476 --- Spindle Motor Power-on Hours +0x03 0x010 4 14476 --- Head Flying Hours +0x03 0x018 4 585 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1 --- Read Recovery Attempts +0x03 0x030 4 9 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 35 N-- Average Short Term Temperature +0x05 0x018 1 30 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 38 N-- Highest Average Short Term Temperature +0x05 0x038 1 23 N-- Lowest Average Short Term Temperature +0x05 0x040 1 33 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 78 --- Number of Hardware Resets +0x06 0x010 4 58 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA300/1DEDD14E0E0F b/HDD/Toshiba/DT01/DT01ACA300/1DEDD14E0E0F new file mode 100644 index 000000000..a4b6cb25e --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA300/1DEDD14E0E0F @@ -0,0 +1,289 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA300 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OABB0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:34 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (23369) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 390) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 139 139 054 - 72 + 3 Spin_Up_Time POS--- 134 134 024 - 416 (Average 437) + 4 Start_Stop_Count -O--C- 100 100 000 - 84 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 095 095 000 - 39990 + 10 Spin_Retry_Count PO--C- 095 095 060 - 65536 + 12 Power_Cycle_Count -O--CK 100 100 000 - 82 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 230 +193 Load_Cycle_Count -O--C- 100 100 000 - 230 +194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 19/56) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 2 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 988 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 988 [3] occurred at disk power-on lifetime: 23565 hours (981 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 01 00 00 00 b6 3c 8d f8 06 00 Error: ICRC, ABRT 256 sectors at LBA = 0xb63c8df8 = 3057421816 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 01 00 00 00 b6 3c 8d f8 46 04 1d+02:44:20.368 WRITE DMA EXT + 35 00 00 01 00 00 00 b6 3c 8d f8 40 00 1d+02:43:50.487 WRITE DMA EXT + 25 00 00 01 00 00 00 1f 55 97 90 40 00 1d+02:43:50.485 READ DMA EXT + 25 00 00 01 00 00 00 1f 55 95 90 40 00 1d+02:43:50.483 READ DMA EXT + ca 00 00 00 06 00 00 00 00 54 23 e0 00 1d+02:43:50.482 WRITE DMA + +Error 987 [2] occurred at disk power-on lifetime: 23345 hours (972 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 41 00 00 50 59 2c 5f 00 00 Error: ICRC, ABRT at LBA = 0x50592c5f = 1348021343 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 80 00 08 00 00 50 59 2c 20 40 00 00:18:44.783 READ FPDMA QUEUED + 60 00 80 00 f8 00 00 50 59 2b a0 40 00 00:18:44.783 READ FPDMA QUEUED + 60 00 80 00 f0 00 00 50 59 2b 20 40 00 00:18:44.783 READ FPDMA QUEUED + 60 00 80 00 e8 00 00 50 59 2a a0 40 00 00:18:44.783 READ FPDMA QUEUED + 60 00 80 00 e0 00 00 50 59 2a 20 40 00 00:18:44.782 READ FPDMA QUEUED + +Error 986 [1] occurred at disk power-on lifetime: 23345 hours (972 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 18 00 00 f2 72 f4 f0 02 00 Error: WP at LBA = 0xf272f4f0 = 4067620080 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 80 80 40 00 00 d7 7c 1c 2a 40 08 3d+05:18:49.823 WRITE FPDMA QUEUED + 61 00 80 00 38 00 00 d7 78 bb 2a 40 08 3d+05:18:49.822 WRITE FPDMA QUEUED + 61 01 00 80 00 00 00 f2 73 04 08 40 08 3d+05:18:49.816 WRITE FPDMA QUEUED + 60 00 80 00 08 00 00 1d 55 0f 6a 40 08 3d+05:18:49.796 READ FPDMA QUEUED + 61 01 00 00 68 00 00 d7 84 9b 08 40 08 3d+05:18:49.793 WRITE FPDMA QUEUED + +Error 985 [0] occurred at disk power-on lifetime: 23344 hours (972 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 18 00 00 f2 72 f4 f0 02 00 Error: WP at LBA = 0xf272f4f0 = 4067620080 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 5e 00 00 00 00 f2 70 79 aa 40 08 3d+05:02:36.359 WRITE FPDMA QUEUED + 61 01 00 00 60 00 00 87 c0 ed 08 40 08 3d+05:02:36.335 WRITE FPDMA QUEUED + 60 01 00 de b0 00 00 d7 7c 1b 08 40 08 3d+05:02:36.322 READ FPDMA QUEUED + 60 00 de 80 a8 00 00 d7 7c 1a 2a 40 08 3d+05:02:36.322 READ FPDMA QUEUED + 60 00 80 80 a0 00 00 d7 7c 13 2a 40 08 3d+05:02:36.322 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 39830 - +# 2 Short offline Completed without error 00% 39782 - +# 3 Short offline Completed without error 00% 23345 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/33 Celsius +Lifetime Min/Max Temperature: 19/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (68) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 82 --- Lifetime Power-On Resets +0x01 0x010 4 39990 --- Power-on Hours +0x01 0x018 6 76004502443 --- Logical Sectors Written +0x01 0x020 6 1102258577 --- Number of Write Commands +0x01 0x028 6 179536602568 --- Logical Sectors Read +0x01 0x030 6 945288563 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 39985 --- Spindle Motor Power-on Hours +0x03 0x010 4 39985 --- Head Flying Hours +0x03 0x018 4 230 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 36563 --- Read Recovery Attempts +0x03 0x030 4 6 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 986 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 30 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 45 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 35 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1552 --- Number of Hardware Resets +0x06 0x010 4 1351 --- Number of ASR Events +0x06 0x018 4 2 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA300/4202AAACF24D b/HDD/Toshiba/DT01/DT01ACA300/4202AAACF24D new file mode 100644 index 000000000..f5bd3d0ae --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA300/4202AAACF24D @@ -0,0 +1,241 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA300 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OABB0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:29 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (21791) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 364) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 1 + 2 Throughput_Performance P-S--- 139 139 054 - 71 + 3 Spin_Up_Time POS--- 133 133 024 - 432 (Average 428) + 4 Start_Stop_Count -O--C- 100 100 000 - 818 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 095 095 000 - 40823 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 787 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 995 +193 Load_Cycle_Count -O--C- 100 100 000 - 996 +194 Temperature_Celsius -O---- 150 150 000 - 40 (Min/Max 18/56) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 7778 hours (324 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 41 00 00 00 65 ef c7 00 00 Error: ICRC, ABRT at LBA = 0x0065efc7 = 6680519 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 00 65 ef 08 40 08 23:58:07.357 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 65 ee 08 40 08 23:58:07.355 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 65 ec 08 40 08 23:58:07.352 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 65 eb 08 40 08 23:58:07.350 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 65 e9 08 40 08 23:58:07.345 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 40662 - +# 2 Short offline Completed without error 00% 38254 - +# 3 Short offline Completed without error 00% 33401 - +# 4 Short offline Completed without error 00% 25848 - +# 5 Short offline Completed without error 00% 4350 - +# 6 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 36/43 Celsius +Lifetime Min/Max Temperature: 18/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (28) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 787 --- Lifetime Power-On Resets +0x01 0x010 4 40823 --- Power-on Hours +0x01 0x018 6 86196153037 --- Logical Sectors Written +0x01 0x020 6 400505577 --- Number of Write Commands +0x01 0x028 6 220329234454 --- Logical Sectors Read +0x01 0x030 6 1040265089 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 40814 --- Spindle Motor Power-on Hours +0x03 0x010 4 40814 --- Head Flying Hours +0x03 0x018 4 996 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 462 --- Read Recovery Attempts +0x03 0x030 4 17 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 39 N-- Average Short Term Temperature +0x05 0x018 1 38 N-- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3320 --- Number of Hardware Resets +0x06 0x010 4 2086 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA300/477F2FF506E6 b/HDD/Toshiba/DT01/DT01ACA300/477F2FF506E6 new file mode 100644 index 000000000..8e0c06b8d --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA300/477F2FF506E6 @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA300 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OABB0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:13 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (21791) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 364) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 140 140 054 - 69 + 3 Spin_Up_Time POS--- 131 131 024 - 433 (Average 439) + 4 Start_Stop_Count -O--C- 100 100 000 - 127 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 093 093 000 - 49916 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 127 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 322 +193 Load_Cycle_Count -O--C- 100 100 000 - 322 +194 Temperature_Celsius -O---- 146 146 000 - 41 (Min/Max 22/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 27954 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 37/43 Celsius +Lifetime Min/Max Temperature: 22/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (77) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 127 --- Lifetime Power-On Resets +0x01 0x010 4 49916 --- Power-on Hours +0x01 0x018 6 85656987691 --- Logical Sectors Written +0x01 0x020 6 2513012991 --- Number of Write Commands +0x01 0x028 6 200140216433 --- Logical Sectors Read +0x01 0x030 6 1192779195 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 49909 --- Spindle Motor Power-on Hours +0x03 0x010 4 49909 --- Head Flying Hours +0x03 0x018 4 322 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 395 --- Read Recovery Attempts +0x03 0x030 4 6 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 40 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 36 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 417 --- Number of Hardware Resets +0x06 0x010 4 287 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA300/503E331A8BBE b/HDD/Toshiba/DT01/DT01ACA300/503E331A8BBE new file mode 100644 index 000000000..f84c5790f --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA300/503E331A8BBE @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA300 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OABB0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:24 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (21648) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 361) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 139 139 054 - 71 + 3 Spin_Up_Time POS--- 129 129 024 - 443 (Average 444) + 4 Start_Stop_Count -O--C- 100 100 000 - 135 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 8 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 098 098 000 - 20239 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 42 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 280 +193 Load_Cycle_Count -O--C- 100 100 000 - 280 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 24/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 8 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3806 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 29/34 Celsius +Lifetime Min/Max Temperature: 24/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (2) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 42 --- Lifetime Power-On Resets +0x01 0x010 4 20239 --- Power-on Hours +0x01 0x018 6 50356583216 --- Logical Sectors Written +0x01 0x020 6 429460742 --- Number of Write Commands +0x01 0x028 6 29078215863 --- Logical Sectors Read +0x01 0x030 6 203112520 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 20236 --- Spindle Motor Power-on Hours +0x03 0x010 4 20236 --- Head Flying Hours +0x03 0x018 4 280 --- Head Load Events +0x03 0x020 4 8 --- Number of Reallocated Logical Sectors +0x03 0x028 4 123 --- Read Recovery Attempts +0x03 0x030 4 9 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 32 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 38 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 36 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 203 --- Number of Hardware Resets +0x06 0x010 4 157 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA300/5ED1E7684FA1 b/HDD/Toshiba/DT01/DT01ACA300/5ED1E7684FA1 new file mode 100644 index 000000000..9d758638e --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA300/5ED1E7684FA1 @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA300 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OABB0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:27 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (22078) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 368) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 140 140 054 - 69 + 3 Spin_Up_Time POS--- 135 135 024 - 423 (Average 425) + 4 Start_Stop_Count -O--C- 100 100 000 - 48 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 094 094 000 - 47080 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 38 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 363 +193 Load_Cycle_Count -O--C- 100 100 000 - 363 +194 Temperature_Celsius -O---- 150 150 000 - 40 (Min/Max 21/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 10427 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 36/42 Celsius +Lifetime Min/Max Temperature: 21/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (8) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 38 --- Lifetime Power-On Resets +0x01 0x010 4 47080 --- Power-on Hours +0x01 0x018 6 79370700645 --- Logical Sectors Written +0x01 0x020 6 3243684421 --- Number of Write Commands +0x01 0x028 6 60969838273 --- Logical Sectors Read +0x01 0x030 6 664542951 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 47073 --- Spindle Motor Power-on Hours +0x03 0x010 4 47073 --- Head Flying Hours +0x03 0x018 4 363 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 11 --- Read Recovery Attempts +0x03 0x030 4 11 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 39 N-- Average Short Term Temperature +0x05 0x018 1 37 N-- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 38 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 237 --- Number of Hardware Resets +0x06 0x010 4 223 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA300/7357547DA4AF b/HDD/Toshiba/DT01/DT01ACA300/7357547DA4AF new file mode 100644 index 000000000..2e74c3b27 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA300/7357547DA4AF @@ -0,0 +1,289 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA300 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OABB0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:22 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (21504) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 359) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 139 139 054 - 70 + 3 Spin_Up_Time POS--- 154 154 024 - 429 (Average 316) + 4 Start_Stop_Count -O--C- 100 100 000 - 131 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 126 126 020 - 32 + 9 Power_On_Hours -O--C- 095 095 000 - 35481 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 127 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 145 +193 Load_Cycle_Count -O--C- 100 100 000 - 145 +194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 23/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 31 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 31 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 31 [2] occurred at disk power-on lifetime: 22397 hours (933 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 60 00 00 16 82 8b 93 06 00 Error: ICRC, ABRT at LBA = 0x16828b93 = 377654163 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 80 00 a8 00 00 16 82 8b 73 40 00 01:23:53.554 WRITE FPDMA QUEUED + 61 00 80 00 a0 00 00 16 82 8a f3 40 00 01:23:53.553 WRITE FPDMA QUEUED + 61 00 80 00 98 00 00 16 82 8a 73 40 00 01:23:53.553 WRITE FPDMA QUEUED + 61 00 80 00 90 00 00 16 82 89 f3 40 00 01:23:53.553 WRITE FPDMA QUEUED + 61 00 80 00 88 00 00 16 82 89 73 40 00 01:23:53.552 WRITE FPDMA QUEUED + +Error 30 [1] occurred at disk power-on lifetime: 22397 hours (933 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 70 00 00 16 82 81 03 06 00 Error: ICRC, ABRT at LBA = 0x16828103 = 377651459 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 80 00 58 00 00 16 82 80 f3 40 00 01:22:53.324 WRITE FPDMA QUEUED + 61 00 80 00 50 00 00 16 82 80 73 40 00 01:22:53.324 WRITE FPDMA QUEUED + 61 00 80 00 48 00 00 16 82 7f f3 40 00 01:22:53.324 WRITE FPDMA QUEUED + 61 00 80 00 40 00 00 16 82 7f 73 40 00 01:22:53.323 WRITE FPDMA QUEUED + 61 00 80 00 38 00 00 16 82 7e f3 40 00 01:22:53.323 WRITE FPDMA QUEUED + +Error 29 [0] occurred at disk power-on lifetime: 22397 hours (933 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 20 00 00 16 82 3d d3 06 00 Error: ICRC, ABRT at LBA = 0x16823dd3 = 377634259 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 80 00 10 00 00 16 82 3d 73 40 00 01:21:53.026 WRITE FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 00 00 01:21:53.026 SET FEATURES [Enable write cache] + 61 00 80 00 40 00 00 16 82 3d b3 06 ff 01:21:52.966 WRITE FPDMA QUEUED + 61 00 80 00 08 00 00 16 82 3d 73 40 00 01:20:52.858 WRITE FPDMA QUEUED + 61 00 80 00 f8 00 00 16 82 3c f3 40 00 01:20:52.858 WRITE FPDMA QUEUED + +Error 28 [3] occurred at disk power-on lifetime: 22397 hours (933 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 40 00 00 16 82 3d b3 06 00 Error: ICRC, ABRT at LBA = 0x16823db3 = 377634227 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 80 00 08 00 00 16 82 3d 73 40 00 01:20:52.858 WRITE FPDMA QUEUED + 61 00 80 00 f8 00 00 16 82 3c f3 40 00 01:20:52.858 WRITE FPDMA QUEUED + 61 00 80 00 f0 00 00 16 82 3c 73 40 00 01:20:52.857 WRITE FPDMA QUEUED + 61 00 80 00 e8 00 00 16 82 3b f3 40 00 01:20:52.857 WRITE FPDMA QUEUED + 61 00 80 00 e0 00 00 16 82 3b 73 40 00 01:20:52.857 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 35321 - +# 2 Short offline Completed without error 00% 22768 - +# 3 Short offline Completed without error 00% 22396 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/33 Celsius +Lifetime Min/Max Temperature: 23/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (28) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 127 --- Lifetime Power-On Resets +0x01 0x010 4 35481 --- Power-on Hours +0x01 0x018 6 55451964828 --- Logical Sectors Written +0x01 0x020 6 253243516 --- Number of Write Commands +0x01 0x028 6 217662454957 --- Logical Sectors Read +0x01 0x030 6 985031715 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 35476 --- Spindle Motor Power-on Hours +0x03 0x010 4 35476 --- Head Flying Hours +0x03 0x018 4 145 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 571 --- Read Recovery Attempts +0x03 0x030 4 13 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 32 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 38 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 245 --- Number of Hardware Resets +0x06 0x010 4 196 --- Number of ASR Events +0x06 0x018 4 31 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA300/F0B0A9BC1927 b/HDD/Toshiba/DT01/DT01ACA300/F0B0A9BC1927 new file mode 100644 index 000000000..30f7ef31e --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA300/F0B0A9BC1927 @@ -0,0 +1,289 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA300 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OABB0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:20 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (22939) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 383) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 139 139 054 - 72 + 3 Spin_Up_Time POS--- 133 133 024 - 446 (Average 418) + 4 Start_Stop_Count -O--C- 100 100 000 - 119 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 094 094 000 - 48490 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 98 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 361 +193 Load_Cycle_Count -O--C- 100 100 000 - 361 +194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 22/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 230 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 230 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 230 [1] occurred at disk power-on lifetime: 18185 hours (757 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 33 00 00 79 f0 47 77 09 00 Error: ICRC, ABRT at LBA = 0x79f04777 = 2045790071 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 a2 5e 00 00 00 79 f0 47 08 40 08 04:04:19.275 READ FPDMA QUEUED + 61 00 5e 00 00 00 00 79 f0 46 aa 40 08 04:04:19.263 WRITE FPDMA QUEUED + 60 01 00 22 08 00 00 95 da 2b 08 40 08 04:04:19.246 READ FPDMA QUEUED + 60 00 22 10 00 00 00 7c c5 9d 08 40 08 04:04:19.246 READ FPDMA QUEUED + 61 00 10 10 00 00 00 00 00 02 aa 40 08 04:03:56.412 WRITE FPDMA QUEUED + +Error 229 [0] occurred at disk power-on lifetime: 18178 hours (757 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 e1 00 00 dc c1 8d 27 0c 00 Error: ICRC, ABRT at LBA = 0xdcc18d27 = 3703672103 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 90 00 00 dc df d5 08 40 08 6d+02:06:26.029 WRITE FPDMA QUEUED + 61 01 00 00 88 00 00 dc df d4 08 40 08 6d+02:06:26.026 WRITE FPDMA QUEUED + 60 01 00 00 80 00 00 dc df cf 08 40 08 6d+02:06:26.024 READ FPDMA QUEUED + 61 01 00 00 78 00 00 dc df ce 08 40 08 6d+02:06:26.024 WRITE FPDMA QUEUED + 61 01 00 00 70 00 00 dc df cd 08 40 08 6d+02:06:26.022 WRITE FPDMA QUEUED + +Error 228 [3] occurred at disk power-on lifetime: 18131 hours (755 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 d3 00 01 01 5d de 35 01 00 Error: ICRC, ABRT at LBA = 0x1015dde35 = 4317896245 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 00 00 01 01 5d de 08 40 08 4d+03:09:49.277 WRITE FPDMA QUEUED + 61 01 00 00 00 00 01 01 5d dd 08 40 08 4d+03:09:49.275 WRITE FPDMA QUEUED + 61 01 00 00 08 00 01 01 5d dc 08 40 08 4d+03:09:49.273 WRITE FPDMA QUEUED + 61 01 00 00 00 00 01 01 5d db 08 40 08 4d+03:09:49.271 WRITE FPDMA QUEUED + 61 01 00 00 00 00 01 01 5d da 08 40 08 4d+03:09:49.269 WRITE FPDMA QUEUED + +Error 227 [2] occurred at disk power-on lifetime: 18131 hours (755 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 60 00 01 00 83 11 a8 00 00 Error: ICRC, ABRT at LBA = 0x1008311a8 = 4303557032 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 60 00 01 00 83 11 a8 40 ff 4d+02:28:37.610 WRITE FPDMA QUEUED + 61 01 00 00 00 00 01 00 83 11 08 40 08 4d+02:28:37.361 WRITE FPDMA QUEUED + 61 01 00 00 00 00 01 00 83 10 08 40 08 4d+02:28:37.359 WRITE FPDMA QUEUED + 61 01 00 00 18 00 01 00 83 0f 08 40 08 4d+02:28:37.358 WRITE FPDMA QUEUED + 61 01 00 00 08 00 01 00 83 0e 08 40 08 4d+02:28:37.358 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 18273 - +# 2 Short offline Completed without error 00% 23 - +# 3 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 28/33 Celsius +Lifetime Min/Max Temperature: 22/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (122) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 98 --- Lifetime Power-On Resets +0x01 0x010 4 48490 --- Power-on Hours +0x01 0x018 6 77361417364 --- Logical Sectors Written +0x01 0x020 6 3171874954 --- Number of Write Commands +0x01 0x028 6 142411871750 --- Logical Sectors Read +0x01 0x030 6 1018737972 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 48483 --- Spindle Motor Power-on Hours +0x03 0x010 4 48483 --- Head Flying Hours +0x03 0x018 4 361 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1186 --- Read Recovery Attempts +0x03 0x030 4 8 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 139 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 31 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 23 N-- Lowest Average Short Term Temperature +0x05 0x040 1 42 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 550 --- Number of Hardware Resets +0x06 0x010 4 506 --- Number of ASR Events +0x06 0x018 4 230 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/DT01/DT01ACA300/FE5B92AD8DCB b/HDD/Toshiba/DT01/DT01ACA300/FE5B92AD8DCB new file mode 100644 index 000000000..1278fd778 --- /dev/null +++ b/HDD/Toshiba/DT01/DT01ACA300/FE5B92AD8DCB @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" DT01ACA... Desktop HDD +Device Model: TOSHIBA DT01ACA300 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OABB0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:17 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (21504) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 359) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 140 140 054 - 68 + 3 Spin_Up_Time POS--- 135 135 024 - 427 (Average 422) + 4 Start_Stop_Count -O--C- 100 100 000 - 79 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 097 097 000 - 26443 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 76 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 92 +193 Load_Cycle_Count -O--C- 100 100 000 - 92 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 25/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 26283 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 29/34 Celsius +Lifetime Min/Max Temperature: 25/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (21) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 76 --- Lifetime Power-On Resets +0x01 0x010 4 26443 --- Power-on Hours +0x01 0x018 6 38267691332 --- Logical Sectors Written +0x01 0x020 6 168433062 --- Number of Write Commands +0x01 0x028 6 176699160592 --- Logical Sectors Read +0x01 0x030 6 782248271 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 26440 --- Spindle Motor Power-on Hours +0x03 0x010 4 26440 --- Head Flying Hours +0x03 0x018 4 92 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 158 --- Read Recovery Attempts +0x03 0x030 4 6 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 32 N-- Average Short Term Temperature +0x05 0x018 1 37 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 42 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 158 --- Number of Hardware Resets +0x06 0x010 4 116 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/HDWD/HDWD110/568405A953C4 b/HDD/Toshiba/HDWD/HDWD110/568405A953C4 new file mode 100644 index 000000000..3eedde7d8 --- /dev/null +++ b/HDD/Toshiba/HDWD/HDWD110/568405A953C4 @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba P300 +Device Model: TOSHIBA HDWD110 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS2OA8J0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:32 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7022) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 117) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 142 142 054 - 69 + 3 Spin_Up_Time POS--- 127 127 024 - 180 (Average 182) + 4 Start_Stop_Count -O--C- 100 100 000 - 27 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 110 110 020 - 36 + 9 Power_On_Hours -O--C- 097 097 000 - 23313 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 457 +193 Load_Cycle_Count -O--C- 100 100 000 - 457 +194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 22/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 53 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 34/37 Celsius +Lifetime Min/Max Temperature: 22/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (65) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 23313 --- Power-on Hours +0x01 0x018 6 7370250524 --- Logical Sectors Written +0x01 0x020 6 31950578 --- Number of Write Commands +0x01 0x028 6 849228876744 --- Logical Sectors Read +0x01 0x030 6 23455985 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 23309 --- Spindle Motor Power-on Hours +0x03 0x010 4 23309 --- Head Flying Hours +0x03 0x018 4 457 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 36 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 36 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 366 --- Number of Hardware Resets +0x06 0x010 4 264 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/HDWD/HDWD110/6705733D1592 b/HDD/Toshiba/HDWD/HDWD110/6705733D1592 new file mode 100644 index 000000000..ce3da2f53 --- /dev/null +++ b/HDD/Toshiba/HDWD/HDWD110/6705733D1592 @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba P300 +Device Model: TOSHIBA HDWD110 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS2OA8R0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 14:14:06 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7361) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 123) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 142 142 054 - 71 + 3 Spin_Up_Time POS--- 115 115 024 - 205 (Average 193) + 4 Start_Stop_Count -O--C- 100 100 000 - 32 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 115 115 020 - 34 + 9 Power_On_Hours -O--C- 099 099 000 - 11492 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 32 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 475 +193 Load_Cycle_Count -O--C- 100 100 000 - 475 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 14/38) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 27/38 Celsius +Lifetime Min/Max Temperature: 14/38 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (57) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 11492 --- Power-on Hours +0x01 0x018 6 467075065 --- Logical Sectors Written +0x01 0x020 6 1841948 --- Number of Write Commands +0x01 0x028 6 868251963237 --- Logical Sectors Read +0x01 0x030 6 1847732 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 11490 --- Spindle Motor Power-on Hours +0x03 0x010 4 11490 --- Head Flying Hours +0x03 0x018 4 475 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 9 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 34 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 33 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 399 --- Number of Hardware Resets +0x06 0x010 4 368 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 62 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 62 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/HDWD/HDWD110/816F3D93F6E6 b/HDD/Toshiba/HDWD/HDWD110/816F3D93F6E6 new file mode 100644 index 000000000..139ea9fc5 --- /dev/null +++ b/HDD/Toshiba/HDWD/HDWD110/816F3D93F6E6 @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba P300 +Device Model: TOSHIBA HDWD110 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MS2OA8R0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 4 04:59:16 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7313) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 122) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 100 100 054 - 0 + 3 Spin_Up_Time POS--- 100 100 024 - 185 + 4 Start_Stop_Count -O--C- 100 100 000 - 6 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 100 100 020 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 6 +193 Load_Cycle_Count -O--C- 100 100 000 - 6 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 24/35) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 24/35 Celsius +Lifetime Min/Max Temperature: 24/35 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (102) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x010 4 7 --- Power-on Hours +0x01 0x018 6 0 --- Logical Sectors Written +0x01 0x020 6 0 --- Number of Write Commands +0x01 0x028 6 37792 --- Logical Sectors Read +0x01 0x030 6 734 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 7 --- Spindle Motor Power-on Hours +0x03 0x010 4 7 --- Head Flying Hours +0x03 0x018 4 6 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 2 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 - N-- Average Short Term Temperature +0x05 0x018 1 - N-- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 - N-- Highest Average Short Term Temperature +0x05 0x038 1 - N-- Lowest Average Short Term Temperature +0x05 0x040 1 - N-- Highest Average Long Term Temperature +0x05 0x048 1 - N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 30 --- Number of Hardware Resets +0x06 0x010 4 21 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/HDWD/HDWD120/6F45D539EA55 b/HDD/Toshiba/HDWD/HDWD120/6F45D539EA55 new file mode 100644 index 000000000..4bd7a883e --- /dev/null +++ b/HDD/Toshiba/HDWD/HDWD120/6F45D539EA55 @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba P300 +Device Model: TOSHIBA HDWD120 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX4OACF0 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 21 03:11:50 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (14344) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 239) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 140 140 054 - 68 + 3 Spin_Up_Time POS--- 127 127 024 - 296 (Average 298) + 4 Start_Stop_Count -O--C- 100 100 000 - 2002 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 098 098 000 - 17359 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1959 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 2019 +193 Load_Cycle_Count -O--C- 099 099 000 - 2019 +194 Temperature_Celsius -O---- 200 200 000 - 30 (Min/Max 17/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 25/33 Celsius +Lifetime Min/Max Temperature: 17/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (60) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1959 --- Lifetime Power-On Resets +0x01 0x010 4 17359 --- Power-on Hours +0x01 0x018 6 51046058787 --- Logical Sectors Written +0x01 0x020 6 283551819 --- Number of Write Commands +0x01 0x028 6 45935115547 --- Logical Sectors Read +0x01 0x030 6 371029868 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 17336 --- Spindle Motor Power-on Hours +0x03 0x010 4 17336 --- Head Flying Hours +0x03 0x018 4 2019 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 6 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 5 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 15 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 32 N-- Average Short Term Temperature +0x05 0x018 1 30 N-- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 49 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 46 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 12915 --- Number of Hardware Resets +0x06 0x010 4 8617 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/HDWD/HDWD130/C109B894B159 b/HDD/Toshiba/HDWD/HDWD130/C109B894B159 new file mode 100644 index 000000000..a44a59883 --- /dev/null +++ b/HDD/Toshiba/HDWD/HDWD130/C109B894B159 @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba P300 +Device Model: TOSHIBA HDWD130 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OACF0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:35 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (21935) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 366) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 140 140 054 - 67 + 3 Spin_Up_Time POS--- 131 131 024 - 439 (Average 434) + 4 Start_Stop_Count -O--C- 100 100 000 - 58 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 098 098 000 - 16352 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 57 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 65 +193 Load_Cycle_Count -O--C- 100 100 000 - 65 +194 Temperature_Celsius -O---- 162 162 000 - 37 (Min/Max 23/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 16183 - +# 2 Short offline Completed without error 00% 12998 - +# 3 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 33/39 Celsius +Lifetime Min/Max Temperature: 23/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (18) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 57 --- Lifetime Power-On Resets +0x01 0x010 4 16352 --- Power-on Hours +0x01 0x018 6 56375884806 --- Logical Sectors Written +0x01 0x020 6 233179500 --- Number of Write Commands +0x01 0x028 6 99704573673 --- Logical Sectors Read +0x01 0x030 6 461298623 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 16349 --- Spindle Motor Power-on Hours +0x03 0x010 4 16349 --- Head Flying Hours +0x03 0x018 4 65 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 409 --- Read Recovery Attempts +0x03 0x030 4 11 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 36 N-- Average Short Term Temperature +0x05 0x018 1 39 N-- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 42 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 675 --- Number of Hardware Resets +0x06 0x010 4 101 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/Toshiba/HDWD/HDWD130/EF508051A4CF b/HDD/Toshiba/HDWD/HDWD130/EF508051A4CF new file mode 100644 index 000000000..fc455be37 --- /dev/null +++ b/HDD/Toshiba/HDWD/HDWD130/EF508051A4CF @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba P300 +Device Model: TOSHIBA HDWD130 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OACF0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 4 14:09:23 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (22222) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 371) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 140 140 054 - 67 + 3 Spin_Up_Time POS--- 139 139 024 - 427 (Average 398) + 4 Start_Stop_Count -O--C- 100 100 000 - 3763 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 099 099 000 - 7418 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2161 +192 Power-Off_Retract_Count -O--CK 097 097 000 - 3763 +193 Load_Cycle_Count -O--C- 097 097 000 - 3763 +194 Temperature_Celsius -O---- 214 214 000 - 28 (Min/Max 19/56) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 26/28 Celsius +Lifetime Min/Max Temperature: 19/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (79) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2161 --- Lifetime Power-On Resets +0x01 0x010 4 7418 --- Power-on Hours +0x01 0x018 6 14096724181 --- Logical Sectors Written +0x01 0x020 6 75483970 --- Number of Write Commands +0x01 0x028 6 28116148261 --- Logical Sectors Read +0x01 0x030 6 218312520 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 7018 --- Spindle Motor Power-on Hours +0x03 0x010 4 7018 --- Head Flying Hours +0x03 0x018 4 3763 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 193 --- Read Recovery Attempts +0x03 0x030 4 16 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 15 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 38 N-- Average Short Term Temperature +0x05 0x018 1 39 N-- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 47 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 43 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10992 --- Number of Hardware Resets +0x06 0x010 4 4436 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/HDWD/HDWD130/F2F19014831B b/HDD/Toshiba/HDWD/HDWD130/F2F19014831B new file mode 100644 index 000000000..01f85e436 --- /dev/null +++ b/HDD/Toshiba/HDWD/HDWD130/F2F19014831B @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba P300 +Device Model: TOSHIBA HDWD130 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: MX6OACF0 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:30:40 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (21217) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 354) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 140 140 054 - 67 + 3 Spin_Up_Time POS--- 145 145 024 - 398 (Average 391) + 4 Start_Stop_Count -O--C- 100 100 000 - 33 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 124 124 020 - 33 + 9 Power_On_Hours -O--C- 096 096 000 - 30160 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 33 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 105 +193 Load_Cycle_Count -O--C- 100 100 000 - 105 +194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 20/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 7 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x20 GPL R/O 1 Streaming performance log [OBS-8] +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 28/44 Celsius +Lifetime Min/Max Temperature: 20/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (109) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 33 --- Lifetime Power-On Resets +0x01 0x010 4 30160 --- Power-on Hours +0x01 0x018 6 37648491744 --- Logical Sectors Written +0x01 0x020 6 606591593 --- Number of Write Commands +0x01 0x028 6 684567576112 --- Logical Sectors Read +0x01 0x030 6 3196033013 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 30156 --- Spindle Motor Power-on Hours +0x03 0x010 4 30156 --- Head Flying Hours +0x03 0x018 4 105 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 715 --- Read Recovery Attempts +0x03 0x030 4 11 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 38 N-- Average Short Term Temperature +0x05 0x018 1 36 N-- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 42 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 41 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 246 --- Number of Hardware Resets +0x06 0x010 4 213 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 39 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 39 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/Toshiba/HDWE/HDWE150/2A963E093C7A b/HDD/Toshiba/HDWE/HDWE150/2A963E093C7A new file mode 100644 index 000000000..fa26774b3 --- /dev/null +++ b/HDD/Toshiba/HDWE/HDWE150/2A963E093C7A @@ -0,0 +1,369 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba X300 +Device Model: TOSHIBA HDWE150 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FP2A +User Capacity: 5,000,981,078,016 bytes [5.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:17:02 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 558) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 8669 + 4 Start_Stop_Count -O--CK 100 100 000 - 26 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 029 029 000 - 28472 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 26 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 138 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 24 +193 Load_Cycle_Count -O--CK 100 100 000 - 63 +194 Temperature_Celsius -O---K 100 100 000 - 40 (Min/Max 23/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 39 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 033 033 000 - 26885 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 566 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 39 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 39 [38] occurred at disk power-on lifetime: 27655 hours (1152 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 01 56 b7 c8 97 40 00 Error: ICRC, ABRT at LBA = 0x156b7c897 = 5749852311 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 00 00 01 56 b7 c8 68 40 00 13d+07:01:50.181 READ FPDMA QUEUED + 61 00 d8 00 10 00 00 f5 cc 53 08 40 00 13d+07:01:50.180 WRITE FPDMA QUEUED + 61 00 70 00 08 00 00 f5 cc 52 60 40 00 13d+07:01:50.180 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 f5 cc 51 60 40 00 13d+07:01:50.180 WRITE FPDMA QUEUED + 61 00 c8 00 28 00 00 f5 cc 4d e0 40 00 13d+07:01:50.178 WRITE FPDMA QUEUED + +Error 38 [37] occurred at disk power-on lifetime: 25677 hours (1069 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 40 00 00 bc 47 65 3f 40 00 Error: ICRC, ABRT at LBA = 0xbc47653f = 3158795583 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 a8 00 48 00 00 bc 47 65 40 40 00 30d+06:53:08.816 READ FPDMA QUEUED + 60 01 00 00 40 00 00 bc 47 64 40 40 00 30d+06:53:08.816 READ FPDMA QUEUED + 60 01 00 00 38 00 00 bc 47 63 40 40 00 30d+06:53:08.816 READ FPDMA QUEUED + 60 01 00 00 30 00 00 bc 47 62 40 40 00 30d+06:53:08.816 READ FPDMA QUEUED + 60 00 30 00 28 00 00 bc 47 6c 78 40 00 30d+06:53:08.816 READ FPDMA QUEUED + +Error 37 [36] occurred at disk power-on lifetime: 25661 hours (1069 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 00 bd b3 8c 3f 40 00 Error: ICRC, ABRT at LBA = 0xbdb38c3f = 3182660671 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 38 00 00 00 00 bd b3 8c 08 40 00 29d+14:48:35.155 READ FPDMA QUEUED + 60 00 30 00 00 00 01 04 94 4b 10 40 00 29d+14:48:35.153 READ FPDMA QUEUED + 60 00 30 00 00 00 00 bd b3 8b d8 40 00 29d+14:48:35.153 READ FPDMA QUEUED + 60 00 38 00 08 00 01 04 94 4a d8 40 00 29d+14:48:35.151 READ FPDMA QUEUED + 60 00 38 00 00 00 00 bd b3 8b a0 40 00 29d+14:48:35.151 READ FPDMA QUEUED + +Error 36 [35] occurred at disk power-on lifetime: 25572 hours (1065 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 08 00 01 6d 90 7b 1f 40 00 Error: ICRC, ABRT at LBA = 0x16d907b1f = 6133152543 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 38 00 28 00 01 6d 90 82 10 40 00 25d+21:43:47.346 READ FPDMA QUEUED + 60 00 78 00 20 00 01 6d 90 7c 68 40 00 25d+21:43:47.346 READ FPDMA QUEUED + 60 01 00 00 18 00 01 6d 90 7b 68 40 00 25d+21:43:47.346 READ FPDMA QUEUED + 60 00 10 00 10 00 01 6d 90 7b 20 40 00 25d+21:43:47.345 READ FPDMA QUEUED + 60 01 00 00 08 00 01 6d 90 7a 20 40 00 25d+21:43:47.345 READ FPDMA QUEUED + +Error 35 [34] occurred at disk power-on lifetime: 25527 hours (1063 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 01 32 35 10 c7 40 00 Error: ICRC, ABRT at LBA = 0x1323510c7 = 5137305799 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 38 00 00 00 01 32 35 10 90 40 00 24d+00:44:19.854 READ FPDMA QUEUED + 60 00 30 00 00 00 01 32 35 10 28 40 00 24d+00:44:19.854 READ FPDMA QUEUED + 60 00 38 00 00 00 01 32 35 0f f0 40 00 24d+00:44:19.854 READ FPDMA QUEUED + 60 00 38 00 00 00 01 32 35 0f b8 40 00 24d+00:44:19.854 READ FPDMA QUEUED + 60 00 30 00 00 00 01 32 35 0f 88 40 00 24d+00:44:19.853 READ FPDMA QUEUED + +Error 34 [33] occurred at disk power-on lifetime: 25515 hours (1063 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 01 76 df 77 f7 40 00 Error: ICRC, ABRT at LBA = 0x176df77f7 = 6289324023 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 38 00 00 00 01 76 df 77 c0 40 00 23d+13:09:14.918 READ FPDMA QUEUED + 60 00 30 00 00 00 01 76 df 77 90 40 00 23d+13:09:14.918 READ FPDMA QUEUED + 60 00 38 00 00 00 01 76 df 77 58 40 00 23d+13:09:14.918 READ FPDMA QUEUED + 60 00 38 00 00 00 01 76 df 77 20 40 00 23d+13:09:14.918 READ FPDMA QUEUED + 60 00 30 00 00 00 01 76 df 76 f0 40 00 23d+13:09:14.917 READ FPDMA QUEUED + +Error 33 [32] occurred at disk power-on lifetime: 25515 hours (1063 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 20 00 01 76 86 b5 97 40 00 Error: ICRC, ABRT at LBA = 0x17686b597 = 6283507095 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 60 00 28 00 01 76 86 b5 98 40 00 23d+12:58:16.509 READ FPDMA QUEUED + 60 01 00 00 20 00 01 76 86 b4 98 40 00 23d+12:58:16.509 READ FPDMA QUEUED + 60 01 00 00 18 00 01 76 86 b3 98 40 00 23d+12:58:16.509 READ FPDMA QUEUED + 60 01 00 00 08 00 01 76 86 b2 98 40 00 23d+12:58:16.509 READ FPDMA QUEUED + 60 01 00 00 00 00 01 76 86 b1 98 40 00 23d+12:58:16.509 READ FPDMA QUEUED + +Error 32 [31] occurred at disk power-on lifetime: 25512 hours (1063 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 01 db c4 c8 47 40 00 Error: ICRC, ABRT at LBA = 0x1dbc4c847 = 7982073927 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 00 00 01 db c4 c8 18 40 00 23d+10:16:13.001 READ FPDMA QUEUED + 60 00 30 00 00 00 00 c0 0d 9e 40 40 00 23d+10:16:12.677 READ FPDMA QUEUED + 60 00 38 00 00 00 00 b6 91 d6 f8 40 00 23d+10:16:12.549 READ FPDMA QUEUED + 60 00 30 00 00 00 00 b6 91 d6 90 40 00 23d+10:16:12.549 READ FPDMA QUEUED + 60 00 38 00 00 00 00 b6 91 d6 c0 40 00 23d+10:16:12.538 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 37/46 Celsius +Lifetime Min/Max Temperature: 23/57 Celsius +Under/Over Temperature Limit Count: 0/555 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (86) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 28472 --- Power-on Hours +0x01 0x018 6 65375964656 --- Logical Sectors Written +0x01 0x020 6 2105224654 --- Number of Write Commands +0x01 0x028 6 93254745294 --- Logical Sectors Read +0x01 0x030 6 1981459055 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 138 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 28472 --- Spindle Motor Power-on Hours +0x03 0x010 4 26885 --- Head Flying Hours +0x03 0x018 4 63 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 40 N-- Average Short Term Temperature +0x05 0x018 1 43 N-- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 51 N-- Highest Average Short Term Temperature +0x05 0x038 1 36 N-- Lowest Average Short Term Temperature +0x05 0x040 1 49 N-- Highest Average Long Term Temperature +0x05 0x048 1 38 N-- Lowest Average Long Term Temperature +0x05 0x050 4 1915 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1961 --- Number of Hardware Resets +0x06 0x018 4 39 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 27 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/HDWE/HDWE150/36ECBAC662C9 b/HDD/Toshiba/HDWE/HDWE150/36ECBAC662C9 new file mode 100644 index 000000000..dbcee0fcf --- /dev/null +++ b/HDD/Toshiba/HDWE/HDWE150/36ECBAC662C9 @@ -0,0 +1,370 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba X300 +Device Model: TOSHIBA HDWE150 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FP2A +User Capacity: 5,000,981,078,016 bytes [5.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:17:04 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 541) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 8714 + 4 Start_Stop_Count -O--CK 100 100 000 - 27 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 029 029 000 - 28472 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 22154 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 25 +193 Load_Cycle_Count -O--CK 100 100 000 - 39 +194 Temperature_Celsius -O---K 100 100 000 - 41 (Min/Max 23/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 83 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 029 029 000 - 28454 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 553 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 83 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 83 [82] occurred at disk power-on lifetime: 21123 hours (880 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 00 93 2c c9 07 40 00 Error: ICRC, ABRT at LBA = 0x932cc907 = 2469185799 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 00 00 00 93 2c c8 d8 40 00 21d+17:19:51.020 READ FPDMA QUEUED + 60 00 a0 00 00 00 00 93 2c c8 30 40 00 21d+17:19:51.005 READ FPDMA QUEUED + 60 00 30 00 10 00 00 93 2c c7 c8 40 00 21d+17:19:50.999 READ FPDMA QUEUED + 60 00 30 00 08 00 00 93 2c c7 90 40 00 21d+17:19:50.999 READ FPDMA QUEUED + 60 00 30 00 00 00 00 93 2c c7 28 40 00 21d+17:19:50.998 READ FPDMA QUEUED + +Error 82 [81] occurred at disk power-on lifetime: 21112 hours (879 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 00 99 da 0b a7 40 00 Error: ICRC, ABRT at LBA = 0x99da0ba7 = 2581203879 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 00 00 00 99 da 0b 78 40 00 21d+06:45:58.593 READ FPDMA QUEUED + 60 00 38 00 00 00 00 99 da 0b 40 40 00 21d+06:45:58.591 READ FPDMA QUEUED + 60 00 30 00 00 00 00 99 da 0b 10 40 00 21d+06:45:58.589 READ FPDMA QUEUED + 60 00 30 00 00 00 00 99 da 0a d8 40 00 21d+06:45:58.588 READ FPDMA QUEUED + 60 00 68 00 00 00 00 99 da 0a 38 40 00 21d+06:45:58.586 READ FPDMA QUEUED + +Error 81 [80] occurred at disk power-on lifetime: 21112 hours (879 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 01 bb c3 59 af 40 00 Error: ICRC, ABRT at LBA = 0x1bbc359af = 7445109167 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 00 00 01 bb c3 59 80 40 00 21d+06:08:21.300 READ FPDMA QUEUED + 60 00 30 00 00 00 01 bb c3 59 48 40 00 21d+06:08:21.298 READ FPDMA QUEUED + 60 00 38 00 00 00 01 bb c3 59 10 40 00 21d+06:08:21.291 READ FPDMA QUEUED + 60 00 30 00 00 00 01 bb c3 58 e0 40 00 21d+06:08:21.290 READ FPDMA QUEUED + 60 00 30 00 00 00 01 bb c3 58 a8 40 00 21d+06:08:21.289 READ FPDMA QUEUED + +Error 80 [79] occurred at disk power-on lifetime: 21111 hours (879 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 02 12 0d 3f ef 40 00 Error: ICRC, ABRT at LBA = 0x2120d3fef = 8892792815 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 00 00 02 12 0d 3f c0 40 00 21d+05:42:53.360 READ FPDMA QUEUED + 60 00 30 00 00 00 02 12 0d 3f 58 40 00 21d+05:42:53.357 READ FPDMA QUEUED + 60 00 30 00 00 00 02 12 0d 3f 20 40 00 21d+05:42:53.356 READ FPDMA QUEUED + 60 00 30 00 00 00 02 12 0d 3e b8 40 00 21d+05:42:53.352 READ FPDMA QUEUED + 60 00 30 00 00 00 02 12 0d 3e 80 40 00 21d+05:42:53.350 READ FPDMA QUEUED + +Error 79 [78] occurred at disk power-on lifetime: 21111 hours (879 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 02 12 20 d8 87 40 00 Error: ICRC, ABRT at LBA = 0x21220d887 = 8894077063 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 00 00 02 12 20 d8 58 40 00 21d+05:39:42.763 READ FPDMA QUEUED + 60 00 30 00 00 00 02 12 20 d8 20 40 00 21d+05:39:42.762 READ FPDMA QUEUED + 60 00 30 00 00 00 02 12 20 d7 b8 40 00 21d+05:39:42.759 READ FPDMA QUEUED + 60 00 30 00 08 00 02 12 20 d7 80 40 00 21d+05:39:42.738 READ FPDMA QUEUED + 60 00 30 00 00 00 02 12 20 d7 18 40 00 21d+05:39:42.736 READ FPDMA QUEUED + +Error 78 [77] occurred at disk power-on lifetime: 21111 hours (879 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 50 00 00 c3 65 f2 47 40 00 Error: ICRC, ABRT at LBA = 0xc365f247 = 3278238279 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 10 00 00 c3 65 f5 b0 40 00 21d+05:23:51.419 READ FPDMA QUEUED + 60 00 80 00 68 00 00 c3 65 f5 30 40 00 21d+05:23:51.419 READ FPDMA QUEUED + 60 01 00 00 60 00 00 c3 65 f4 30 40 00 21d+05:23:51.419 READ FPDMA QUEUED + 60 01 00 00 18 00 00 c3 65 f3 30 40 00 21d+05:23:51.419 READ FPDMA QUEUED + 60 00 e8 00 58 00 00 c3 65 f2 48 40 00 21d+05:23:51.418 READ FPDMA QUEUED + +Error 77 [76] occurred at disk power-on lifetime: 21111 hours (879 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 00 00 01 ff 5b 92 0f 40 00 Error: ICRC, ABRT at LBA = 0x1ff5b920f = 8579158543 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 00 00 01 ff 5b 91 e0 40 00 21d+04:59:15.873 READ FPDMA QUEUED + 60 00 30 00 00 00 01 ff 5b 91 78 40 00 21d+04:59:15.868 READ FPDMA QUEUED + 60 00 30 00 00 00 01 ff 5b 91 40 40 00 21d+04:59:15.867 READ FPDMA QUEUED + 60 00 38 00 00 00 01 ff 5b 91 08 40 00 21d+04:59:15.866 READ FPDMA QUEUED + 60 00 30 00 00 00 01 ff 5b 90 d8 40 00 21d+04:59:15.865 READ FPDMA QUEUED + +Error 76 [75] occurred at disk power-on lifetime: 21111 hours (879 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 08 00 01 ff 4f 24 6f 40 00 Error: ICRC, ABRT at LBA = 0x1ff4f246f = 8578344047 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 08 00 01 ff 4f 24 40 40 00 21d+04:58:39.392 READ FPDMA QUEUED + 60 00 30 00 08 00 01 ff 4f 23 d8 40 00 21d+04:58:39.388 READ FPDMA QUEUED + 60 00 30 00 08 00 01 ff 4f 23 a0 40 00 21d+04:58:39.386 READ FPDMA QUEUED + 60 00 38 00 10 00 01 ff 4f 23 68 40 00 21d+04:58:39.384 READ FPDMA QUEUED + 60 00 30 00 10 00 01 ff 4f 23 38 40 00 21d+04:58:39.382 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 18878 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 38/46 Celsius +Lifetime Min/Max Temperature: 23/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (184) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 28472 --- Power-on Hours +0x01 0x018 6 66335647984 --- Logical Sectors Written +0x01 0x020 6 2129852589 --- Number of Write Commands +0x01 0x028 6 100806175997 --- Logical Sectors Read +0x01 0x030 6 2157832232 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 22154 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 28471 --- Spindle Motor Power-on Hours +0x03 0x010 4 28454 --- Head Flying Hours +0x03 0x018 4 39 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 41 N-- Average Short Term Temperature +0x05 0x018 1 44 N-- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 50 N-- Highest Average Short Term Temperature +0x05 0x038 1 37 N-- Lowest Average Short Term Temperature +0x05 0x040 1 47 N-- Highest Average Long Term Temperature +0x05 0x048 1 40 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2180 --- Number of Hardware Resets +0x06 0x018 4 83 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 31 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/HDWE/HDWE150/68339BD29162 b/HDD/Toshiba/HDWE/HDWE150/68339BD29162 new file mode 100644 index 000000000..6ac19ae1d --- /dev/null +++ b/HDD/Toshiba/HDWE/HDWE150/68339BD29162 @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba X300 +Device Model: TOSHIBA HDWE150 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FP2A +User Capacity: 5,000,981,078,016 bytes [5.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:17:13 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 544) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 8468 + 4 Start_Stop_Count -O--CK 100 100 000 - 27 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 029 029 000 - 28472 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 98 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 25 +193 Load_Cycle_Count -O--CK 100 100 000 - 36 +194 Temperature_Celsius -O---K 100 100 000 - 42 (Min/Max 23/58) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 029 029 000 - 28455 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 552 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 39/49 Celsius +Lifetime Min/Max Temperature: 23/58 Celsius +Under/Over Temperature Limit Count: 0/3092 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (189) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 28472 --- Power-on Hours +0x01 0x018 6 66320664392 --- Logical Sectors Written +0x01 0x020 6 2136088744 --- Number of Write Commands +0x01 0x028 6 100575987540 --- Logical Sectors Read +0x01 0x030 6 2167833838 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 98 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 28472 --- Spindle Motor Power-on Hours +0x03 0x010 4 28455 --- Head Flying Hours +0x03 0x018 4 36 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 42 --- Current Temperature +0x05 0x010 1 43 N-- Average Short Term Temperature +0x05 0x018 1 46 N-- Average Long Term Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 53 N-- Highest Average Short Term Temperature +0x05 0x038 1 39 N-- Lowest Average Short Term Temperature +0x05 0x040 1 51 N-- Highest Average Long Term Temperature +0x05 0x048 1 43 N-- Lowest Average Long Term Temperature +0x05 0x050 4 7641 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1824 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/HDWE/HDWE150/DC267B339823 b/HDD/Toshiba/HDWE/HDWE150/DC267B339823 new file mode 100644 index 000000000..b0bc2c0fa --- /dev/null +++ b/HDD/Toshiba/HDWE/HDWE150/DC267B339823 @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba X300 +Device Model: TOSHIBA HDWE150 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FP2A +User Capacity: 5,000,981,078,016 bytes [5.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:17:15 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 537) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 8600 + 4 Start_Stop_Count -O--CK 100 100 000 - 27 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 029 029 000 - 28473 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 111 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 25 +193 Load_Cycle_Count -O--CK 100 100 000 - 60 +194 Temperature_Celsius -O---K 100 100 000 - 41 (Min/Max 22/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 029 029 000 - 28453 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 556 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 37/47 Celsius +Lifetime Min/Max Temperature: 22/57 Celsius +Under/Over Temperature Limit Count: 0/250 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (212) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 28473 --- Power-on Hours +0x01 0x018 6 68969431736 --- Logical Sectors Written +0x01 0x020 6 2252917459 --- Number of Write Commands +0x01 0x028 6 105834065443 --- Logical Sectors Read +0x01 0x030 6 2220305493 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 111 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 28473 --- Spindle Motor Power-on Hours +0x03 0x010 4 28453 --- Head Flying Hours +0x03 0x018 4 60 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 42 N-- Average Short Term Temperature +0x05 0x018 1 45 N-- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 51 N-- Highest Average Short Term Temperature +0x05 0x038 1 38 N-- Lowest Average Short Term Temperature +0x05 0x040 1 49 N-- Highest Average Long Term Temperature +0x05 0x048 1 41 N-- Lowest Average Long Term Temperature +0x05 0x050 4 1684 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1951 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 1 R_ERR response for non-data FIS +0x0006 4 1 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 1 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 49 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/HDWE/HDWE150/E41D1691A3E0 b/HDD/Toshiba/HDWE/HDWE150/E41D1691A3E0 new file mode 100644 index 000000000..1d64ed007 --- /dev/null +++ b/HDD/Toshiba/HDWE/HDWE150/E41D1691A3E0 @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba X300 +Device Model: TOSHIBA HDWE150 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FP2A +User Capacity: 5,000,981,078,016 bytes [5.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:17:07 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 548) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 8555 + 4 Start_Stop_Count -O--CK 100 100 000 - 27 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 029 029 000 - 28472 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 27 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 458 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 25 +193 Load_Cycle_Count -O--CK 100 100 000 - 37 +194 Temperature_Celsius -O---K 100 100 000 - 39 (Min/Max 23/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 029 029 000 - 28454 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 546 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 36/44 Celsius +Lifetime Min/Max Temperature: 23/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (185) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 27 --- Lifetime Power-On Resets +0x01 0x010 4 28472 --- Power-on Hours +0x01 0x018 6 66316012960 --- Logical Sectors Written +0x01 0x020 6 2138440993 --- Number of Write Commands +0x01 0x028 6 100773398358 --- Logical Sectors Read +0x01 0x030 6 2205181925 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 458 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 28472 --- Spindle Motor Power-on Hours +0x03 0x010 4 28454 --- Head Flying Hours +0x03 0x018 4 37 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 39 N-- Average Short Term Temperature +0x05 0x018 1 42 N-- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 48 N-- Highest Average Short Term Temperature +0x05 0x038 1 37 N-- Lowest Average Short Term Temperature +0x05 0x040 1 46 N-- Highest Average Long Term Temperature +0x05 0x048 1 39 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2565 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 35 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/HDWE/HDWE150/FFC541FF44EA b/HDD/Toshiba/HDWE/HDWE150/FFC541FF44EA new file mode 100644 index 000000000..30e14fffa --- /dev/null +++ b/HDD/Toshiba/HDWE/HDWE150/FFC541FF44EA @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba X300 +Device Model: TOSHIBA HDWE150 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FP2A +User Capacity: 5,000,981,078,016 bytes [5.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:17:10 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 558) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 8496 + 4 Start_Stop_Count -O--CK 100 100 000 - 28 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 24 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 029 029 000 - 28472 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 28 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 186918 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 26 +193 Load_Cycle_Count -O--CK 100 100 000 - 39 +194 Temperature_Celsius -O---K 100 100 000 - 40 (Min/Max 23/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 2 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 029 029 000 - 28455 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 553 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 37/46 Celsius +Lifetime Min/Max Temperature: 23/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (214) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 28472 --- Power-on Hours +0x01 0x018 6 68965229856 --- Logical Sectors Written +0x01 0x020 6 2247936093 --- Number of Write Commands +0x01 0x028 6 105990999271 --- Logical Sectors Read +0x01 0x030 6 2201886390 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 186918 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 28472 --- Spindle Motor Power-on Hours +0x03 0x010 4 28455 --- Head Flying Hours +0x03 0x018 4 39 --- Head Load Events +0x03 0x020 4 24 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 41 N-- Average Short Term Temperature +0x05 0x018 1 43 N-- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 49 N-- Highest Average Short Term Temperature +0x05 0x038 1 38 N-- Lowest Average Short Term Temperature +0x05 0x040 1 47 N-- Highest Average Long Term Temperature +0x05 0x048 1 41 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 957 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/HDWN/HDWN180/0A9E76D59EC3 b/HDD/Toshiba/HDWN/HDWN180/0A9E76D59EC3 new file mode 100644 index 000000000..cdb2d7ba7 --- /dev/null +++ b/HDD/Toshiba/HDWN/HDWN180/0A9E76D59EC3 @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA HDWN180 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: GX2M +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 14:36:33 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 769) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 10850 + 4 Start_Stop_Count -O--CK 100 100 000 - 6 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 1411 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 +193 Load_Cycle_Count -O--CK 100 100 000 - 309 +194 Temperature_Celsius -O---K 100 100 000 - 40 (Min/Max 21/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 100 100 000 - 283 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 630 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 2 Device Statistics Notification +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 16384 Current Device Internal Status Data log +0x25 GPL R/O 16384 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 35/49 Celsius +Lifetime Min/Max Temperature: 21/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (343) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x010 4 1411 --- Power-on Hours +0x01 0x018 6 8154875624 --- Logical Sectors Written +0x01 0x020 6 37986524 --- Number of Write Commands +0x01 0x028 6 11665646499 --- Logical Sectors Read +0x01 0x030 6 50174654 --- Number of Read Commands +0x01 0x038 6 5080144892 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 0 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1411 --- Spindle Motor Power-on Hours +0x03 0x010 4 283 --- Head Flying Hours +0x03 0x018 4 310 --- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 1 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 40 N-- Average Short Term Temperature +0x05 0x018 1 38 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 44 N-- Highest Average Short Term Temperature +0x05 0x038 1 35 N-- Lowest Average Short Term Temperature +0x05 0x040 1 38 N-- Highest Average Long Term Temperature +0x05 0x048 1 37 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 48 --- Number of Hardware Resets +0x06 0x010 4 15 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/HDWN/HDWN180/11D49BED3EEC b/HDD/Toshiba/HDWN/HDWN180/11D49BED3EEC new file mode 100644 index 000000000..d4fb54cbc --- /dev/null +++ b/HDD/Toshiba/HDWN/HDWN180/11D49BED3EEC @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA HDWN180 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: GX2M +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 14:36:35 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 755) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 10730 + 4 Start_Stop_Count -O--CK 100 100 000 - 6 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 1411 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 +193 Load_Cycle_Count -O--CK 100 100 000 - 311 +194 Temperature_Celsius -O---K 100 100 000 - 39 (Min/Max 20/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 100 100 000 - 281 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 624 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 2 Device Statistics Notification +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 16384 Current Device Internal Status Data log +0x25 GPL R/O 16384 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 35/49 Celsius +Lifetime Min/Max Temperature: 20/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (429) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x010 4 1411 --- Power-on Hours +0x01 0x018 6 8154857048 --- Logical Sectors Written +0x01 0x020 6 38296308 --- Number of Write Commands +0x01 0x028 6 11700195642 --- Logical Sectors Read +0x01 0x030 6 51625316 --- Number of Read Commands +0x01 0x038 6 5080212020 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 0 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1411 --- Spindle Motor Power-on Hours +0x03 0x010 4 281 --- Head Flying Hours +0x03 0x018 4 312 --- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 1 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 40 N-- Average Short Term Temperature +0x05 0x018 1 37 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 34 N-- Lowest Average Short Term Temperature +0x05 0x040 1 37 N-- Highest Average Long Term Temperature +0x05 0x048 1 36 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 48 --- Number of Hardware Resets +0x06 0x010 4 15 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/HDWN/HDWN180/E391EBB53D47 b/HDD/Toshiba/HDWN/HDWN180/E391EBB53D47 new file mode 100644 index 000000000..393e01a9b --- /dev/null +++ b/HDD/Toshiba/HDWN/HDWN180/E391EBB53D47 @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA HDWN180 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: GX2M +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 14:36:30 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 746) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 10519 + 4 Start_Stop_Count -O--CK 100 100 000 - 11 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 3479 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 11 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 +193 Load_Cycle_Count -O--CK 100 100 000 - 436 +194 Temperature_Celsius -O---K 100 100 000 - 36 (Min/Max 20/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 099 099 000 - 482 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 627 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 2 Device Statistics Notification +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 16384 Current Device Internal Status Data log +0x25 GPL R/O 16384 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 31/43 Celsius +Lifetime Min/Max Temperature: 20/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (109) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 3479 --- Power-on Hours +0x01 0x018 6 19201904600 --- Logical Sectors Written +0x01 0x020 6 84292832 --- Number of Write Commands +0x01 0x028 6 43932141480 --- Logical Sectors Read +0x01 0x030 6 179971678 --- Number of Read Commands +0x01 0x038 6 12526514592 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 0 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3479 --- Spindle Motor Power-on Hours +0x03 0x010 4 482 --- Head Flying Hours +0x03 0x018 4 437 --- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 4 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 1 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 35 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 48 N-- Highest Average Short Term Temperature +0x05 0x038 1 30 N-- Lowest Average Short Term Temperature +0x05 0x040 1 42 N-- Highest Average Long Term Temperature +0x05 0x048 1 32 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 750 --- Number of Hardware Resets +0x06 0x010 4 82 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/HDWQ/HDWQ140/0BB147197A93 b/HDD/Toshiba/HDWQ/HDWQ140/0BB147197A93 new file mode 100644 index 000000000..d8cea3b99 --- /dev/null +++ b/HDD/Toshiba/HDWQ/HDWQ140/0BB147197A93 @@ -0,0 +1,302 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA HDWQ140 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FJ1M +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 09:54:58 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 445) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 6652 + 4 Start_Stop_Count -O--CK 100 100 000 - 12 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 093 093 000 - 3009 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 12 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 23 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 9 +193 Load_Cycle_Count -O--CK 100 100 000 - 14 +194 Temperature_Celsius -O---K 100 100 000 - 44 (Min/Max 24/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 4 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 093 093 000 - 3008 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 563 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 4 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 4 [3] occurred at disk power-on lifetime: 243 hours (10 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 58 00 00 c0 a8 ab cf 40 00 Error: ICRC, ABRT at LBA = 0xc0a8abcf = 3232279503 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 40 00 58 00 00 c0 a8 ab 90 40 00 10d+03:55:17.951 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 10d+03:55:17.943 FLUSH CACHE EXT + 61 00 40 00 48 00 00 c0 a8 ab 50 40 00 10d+03:55:17.943 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 10d+03:55:17.935 FLUSH CACHE EXT + 61 00 40 00 38 00 00 c0 a8 ab 10 40 00 10d+03:55:17.934 WRITE FPDMA QUEUED + +Error 3 [2] occurred at disk power-on lifetime: 224 hours (9 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 10 00 00 93 da fb 27 40 00 Error: ICRC, ABRT at LBA = 0x93dafb27 = 2480601895 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 28 00 10 00 00 93 da fb 00 40 00 9d+08:14:10.262 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 9d+08:14:10.177 FLUSH CACHE EXT + 61 00 18 00 00 00 00 75 84 e0 30 40 00 9d+08:14:10.177 WRITE FPDMA QUEUED + 61 00 08 00 f8 00 00 75 84 e0 28 40 00 9d+08:14:10.177 WRITE FPDMA QUEUED + 61 00 08 00 f0 00 00 75 84 e0 20 40 00 9d+08:14:10.176 WRITE FPDMA QUEUED + +Error 2 [1] occurred at disk power-on lifetime: 109 hours (4 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 58 00 00 c0 8c 4d 17 40 00 Error: ICRC, ABRT at LBA = 0xc08c4d17 = 3230420247 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 40 00 58 00 00 c0 8c 4c d8 40 00 4d+13:49:09.036 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 4d+13:49:09.023 FLUSH CACHE EXT + 61 00 40 00 48 00 00 c0 8c 4c 98 40 00 4d+13:49:09.023 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 4d+13:49:09.005 FLUSH CACHE EXT + 61 00 40 00 38 00 00 c0 8c 4c 58 40 00 4d+13:49:09.005 WRITE FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 54 hours (2 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 80 00 00 c0 79 c0 b7 40 00 Error: ICRC, ABRT at LBA = 0xc079c0b7 = 3229204663 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 40 00 80 00 00 c0 79 c0 78 40 00 2d+06:09:56.079 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 2d+06:09:55.866 FLUSH CACHE EXT + 61 00 08 00 70 00 01 d1 c0 bd 38 40 00 2d+06:09:55.865 WRITE FPDMA QUEUED + 61 00 08 00 68 00 01 d1 c0 bb 38 40 00 2d+06:09:55.865 WRITE FPDMA QUEUED + 61 00 08 00 60 00 00 00 00 03 38 40 00 2d+06:09:55.865 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 30/47 Celsius +Lifetime Min/Max Temperature: 24/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (63) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 3009 --- Power-on Hours +0x01 0x018 6 4502366583 --- Logical Sectors Written +0x01 0x020 6 178275548 --- Number of Write Commands +0x01 0x028 6 5874984899 --- Logical Sectors Read +0x01 0x030 6 35694584 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 23 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3009 --- Spindle Motor Power-on Hours +0x03 0x010 4 3008 --- Head Flying Hours +0x03 0x018 4 14 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 75 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 44 --- Current Temperature +0x05 0x010 1 43 N-- Average Short Term Temperature +0x05 0x018 1 42 N-- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 46 N-- Highest Average Short Term Temperature +0x05 0x038 1 41 N-- Lowest Average Short Term Temperature +0x05 0x040 1 43 N-- Highest Average Long Term Temperature +0x05 0x048 1 42 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 124 --- Number of Hardware Resets +0x06 0x018 4 4 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MC04/MC04ACA400E/58CDB783646B b/HDD/Toshiba/MC04/MC04ACA400E/58CDB783646B new file mode 100644 index 000000000..93368abcb --- /dev/null +++ b/HDD/Toshiba/MC04/MC04ACA400E/58CDB783646B @@ -0,0 +1,218 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA MC04ACA400E +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FP2A +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 16:42:03 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 481) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 6961 + 4 Start_Stop_Count -O--CK 100 100 000 - 11 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 039 039 000 - 24571 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 10 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 7512 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 6 +193 Load_Cycle_Count -O--CK 100 100 000 - 837 +194 Temperature_Celsius -O---K 100 100 000 - 34 (Min/Max 26/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 040 040 000 - 24273 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 635 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4891 - +# 2 Short offline Completed without error 00% 27 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 31/42 Celsius +Lifetime Min/Max Temperature: 26/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (376) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 10 --- Lifetime Power-On Resets +0x01 0x010 4 24571 --- Power-on Hours +0x01 0x018 6 222935258086 --- Logical Sectors Written +0x01 0x020 6 2789520484 --- Number of Write Commands +0x01 0x028 6 241198144842 --- Logical Sectors Read +0x01 0x030 6 3060695053 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 7512 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 24571 --- Spindle Motor Power-on Hours +0x03 0x010 4 24273 --- Head Flying Hours +0x03 0x018 4 837 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 34 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 26 --- Lowest Temperature +0x05 0x030 1 35 N-- Highest Average Short Term Temperature +0x05 0x038 1 30 N-- Lowest Average Short Term Temperature +0x05 0x040 1 34 N-- Highest Average Long Term Temperature +0x05 0x048 1 31 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 766 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 189 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 188 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/MC04/MC04ACA400E/984864E3415E b/HDD/Toshiba/MC04/MC04ACA400E/984864E3415E new file mode 100644 index 000000000..3cefeaad2 --- /dev/null +++ b/HDD/Toshiba/MC04/MC04ACA400E/984864E3415E @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA MC04ACA400E +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FP2A +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 16:42:01 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 480) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 6888 + 4 Start_Stop_Count -O--CK 100 100 000 - 12 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 039 039 000 - 24571 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 10 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 12 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 6 +193 Load_Cycle_Count -O--CK 100 100 000 - 835 +194 Temperature_Celsius -O---K 100 100 000 - 35 (Min/Max 26/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 040 040 000 - 24292 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 648 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4891 - +# 2 Short offline Completed without error 00% 27 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 32/45 Celsius +Lifetime Min/Max Temperature: 26/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (404) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 10 --- Lifetime Power-On Resets +0x01 0x010 4 24571 --- Power-on Hours +0x01 0x018 6 207347260735 --- Logical Sectors Written +0x01 0x020 6 2768026679 --- Number of Write Commands +0x01 0x028 6 256597969131 --- Logical Sectors Read +0x01 0x030 6 3067849038 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 12 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 24571 --- Spindle Motor Power-on Hours +0x03 0x010 4 24292 --- Head Flying Hours +0x03 0x018 4 835 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 35 N-- Average Short Term Temperature +0x05 0x018 1 35 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 26 --- Lowest Temperature +0x05 0x030 1 37 N-- Highest Average Short Term Temperature +0x05 0x038 1 31 N-- Lowest Average Short Term Temperature +0x05 0x040 1 36 N-- Highest Average Long Term Temperature +0x05 0x048 1 32 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 766 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 189 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 189 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MG04/MG04ACA400E/8AF54DD50653 b/HDD/Toshiba/MG04/MG04ACA400E/8AF54DD50653 new file mode 100644 index 000000000..3f924792b --- /dev/null +++ b/HDD/Toshiba/MG04/MG04ACA400E/8AF54DD50653 @@ -0,0 +1,225 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" MG04ACA... Enterprise HDD +Device Model: TOSHIBA MG04ACA400E +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FP3B +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:32:58 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x85) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 478) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 7019 + 4 Start_Stop_Count -O--CK 100 100 000 - 32 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 008 008 000 - 36851 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 32 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 4550 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 +193 Load_Cycle_Count -O--CK 100 100 000 - 378 +194 Temperature_Celsius -O---K 100 100 000 - 48 (Min/Max 23/62) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 010 010 000 - 36016 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 202 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 34847 - +# 2 Extended offline Completed without error 00% 34828 - +# 3 Extended offline Completed without error 00% 32239 - +# 4 Extended offline Completed without error 00% 32219 - +# 5 Extended offline Completed without error 00% 31380 - +# 6 Extended offline Completed without error 00% 31361 - +# 7 Extended offline Completed without error 00% 31346 - +# 8 Extended offline Completed without error 00% 31326 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 39/59 Celsius +Lifetime Min/Max Temperature: 23/62 Celsius +Under/Over Temperature Limit Count: 0/372632 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (194) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 36851 --- Power-on Hours +0x01 0x018 6 262591058518 --- Logical Sectors Written +0x01 0x020 6 4194429383 --- Number of Write Commands +0x01 0x028 6 78728527613 --- Logical Sectors Read +0x01 0x030 6 648647286 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 4550 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 36851 --- Spindle Motor Power-on Hours +0x03 0x010 4 36016 --- Head Flying Hours +0x03 0x018 4 378 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 48 --- Current Temperature +0x05 0x010 1 48 N-- Average Short Term Temperature +0x05 0x018 1 47 N-- Average Long Term Temperature +0x05 0x020 1 62 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 59 N-- Highest Average Short Term Temperature +0x05 0x038 1 37 N-- Lowest Average Short Term Temperature +0x05 0x040 1 57 N-- Highest Average Long Term Temperature +0x05 0x048 1 41 N-- Lowest Average Long Term Temperature +0x05 0x050 4 414583 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 382 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 92 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 92 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/MG04/MG04ACA400E/C2FF10CBBACB b/HDD/Toshiba/MG04/MG04ACA400E/C2FF10CBBACB new file mode 100644 index 000000000..7dfd5d1dc --- /dev/null +++ b/HDD/Toshiba/MG04/MG04ACA400E/C2FF10CBBACB @@ -0,0 +1,227 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" MG04ACA... Enterprise HDD +Device Model: TOSHIBA MG04ACA400E +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FP3B +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:32:55 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 476) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 6981 + 4 Start_Stop_Count -O--CK 100 100 000 - 32 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 008 008 000 - 36851 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 32 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 41297 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 +193 Load_Cycle_Count -O--CK 100 100 000 - 279 +194 Temperature_Celsius -O---K 100 100 000 - 48 (Min/Max 23/62) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 010 010 000 - 36363 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 195 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 34848 - +# 2 Extended offline Completed without error 00% 34828 - +# 3 Extended offline Completed without error 00% 32240 - +# 4 Extended offline Completed without error 00% 32220 - +# 5 Extended offline Completed without error 00% 31381 - +# 6 Extended offline Completed without error 00% 31362 - +# 7 Extended offline Completed without error 00% 31347 - +# 8 Extended offline Completed without error 00% 31327 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 38/59 Celsius +Lifetime Min/Max Temperature: 23/62 Celsius +Under/Over Temperature Limit Count: 0/410149 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (370) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 36851 --- Power-on Hours +0x01 0x018 6 271201935808 --- Logical Sectors Written +0x01 0x020 6 4501275293 --- Number of Write Commands +0x01 0x028 6 125457963368 --- Logical Sectors Read +0x01 0x030 6 967856606 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 41297 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 36851 --- Spindle Motor Power-on Hours +0x03 0x010 4 36363 --- Head Flying Hours +0x03 0x018 4 279 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 49 --- Current Temperature +0x05 0x010 1 48 N-- Average Short Term Temperature +0x05 0x018 1 47 N-- Average Long Term Temperature +0x05 0x020 1 62 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 59 N-- Highest Average Short Term Temperature +0x05 0x038 1 38 N-- Lowest Average Short Term Temperature +0x05 0x040 1 58 N-- Highest Average Long Term Temperature +0x05 0x048 1 42 N-- Lowest Average Long Term Temperature +0x05 0x050 4 458002 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 383 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 92 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 92 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MG04/MG04ACA600E/9652C0F736D5 b/HDD/Toshiba/MG04/MG04ACA600E/9652C0F736D5 new file mode 100644 index 000000000..853fc28fc --- /dev/null +++ b/HDD/Toshiba/MG04/MG04ACA600E/9652C0F736D5 @@ -0,0 +1,221 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 3.5" MG04ACA... Enterprise HDD +Device Model: TOSHIBA MG04ACA600E +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: FS3B +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 5 15:16:23 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 649) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 10491 + 4 Start_Stop_Count -O--CK 100 100 000 - 426 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 675 + 10 Spin_Retry_Count PO--CK 108 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 290 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 65 +193 Load_Cycle_Count -O--CK 100 100 000 - 701 +194 Temperature_Celsius -O---K 100 100 000 - 36 (Min/Max 12/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 100 100 000 - 370 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 628 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 12288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 20/37 Celsius +Lifetime Min/Max Temperature: 12/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (120) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 290 --- Lifetime Power-On Resets +0x01 0x010 4 675 --- Power-on Hours +0x01 0x018 6 12040157769 --- Logical Sectors Written +0x01 0x020 6 49120034 --- Number of Write Commands +0x01 0x028 6 13703249673 --- Logical Sectors Read +0x01 0x030 6 59070264 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 0 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 603 --- Spindle Motor Power-on Hours +0x03 0x010 4 370 --- Head Flying Hours +0x03 0x018 4 701 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 47 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 - N-- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 12 --- Lowest Temperature +0x05 0x030 1 47 N-- Highest Average Short Term Temperature +0x05 0x038 1 28 N-- Lowest Average Short Term Temperature +0x05 0x040 1 - N-- Highest Average Long Term Temperature +0x05 0x048 1 - N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 834 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MK1517/MK1517GAP/67114BB47F6D b/HDD/Toshiba/MK1517/MK1517GAP/67114BB47F6D new file mode 100644 index 000000000..6acb2bca6 --- /dev/null +++ b/HDD/Toshiba/MK1517/MK1517GAP/67114BB47F6D @@ -0,0 +1,175 @@ +smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA MK1517GAP +Serial Number: -- +Firmware Version: A1.04 A +User Capacity: 15,103,033,344 bytes [15.1 GB] +Sector Size: 512 bytes logical/physical +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA/ATAPI-5 (minor revision not indicated) +Local Time is: Wed Oct 21 19:54:19 2020 +10 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 175) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 20) minutes. + +SMART Attributes Data Structure revision number: 6 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 253 100 050 Pre-fail Always - 0 + 2 Throughput_Performance 0x0004 120 100 050 Old_age Offline - 0 + 3 Spin_Up_Time 0x0026 100 100 001 Old_age Always - 1609 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3392 + 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0004 100 100 050 Old_age Offline - 0 + 9 Power_On_Hours 0x0032 078 078 050 Old_age Always - 9137 + 10 Spin_Retry_Count 0x0033 167 100 030 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2562 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 434 +220 Disk_Shift 0x0002 100 100 001 Old_age Always - 4117 +222 Loaded_Hours 0x0032 093 093 050 Old_age Always - 2977 +223 Load_Retry_Count 0x0032 100 100 050 Old_age Always - 0 +224 Load_Friction 0x0022 100 100 050 Old_age Always - 0 +225 Load_Cycle_Count 0x0032 057 057 070 Old_age Always FAILING_NOW 433643 +226 Load-in_Time 0x0026 100 100 001 Old_age Always - 385 +228 Power-off_Retract_Count 0x0032 100 100 060 Old_age Always - 323 +240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 3 + +SMART Error Log Version: 1 +ATA Error Count: 489 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 489 occurred at disk power-on lifetime: 7283 hours (303 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 01 3f 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x0000003f = 63 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 ff 01 3f 00 00 e0 00 00:00:18.258 READ DMA + 20 ff 01 00 00 00 e0 00 00:00:18.245 READ SECTOR(S) + c8 ff 01 00 00 00 e0 00 00:00:18.049 READ DMA + 20 ff 01 00 00 00 e0 00 00:00:16.796 READ SECTOR(S) + 20 ff 01 de 70 00 e0 00 00:00:16.795 READ SECTOR(S) + +Error 488 occurred at disk power-on lifetime: 7283 hours (303 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 01 00 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 ff 01 00 00 00 e0 00 00:00:18.049 READ DMA + 20 ff 01 00 00 00 e0 00 00:00:16.796 READ SECTOR(S) + 20 ff 01 de 70 00 e0 00 00:00:16.795 READ SECTOR(S) + 20 ff 01 dd 70 00 e0 00 00:00:16.795 READ SECTOR(S) + 20 ff 01 dc 70 00 e0 00 00:00:16.794 READ SECTOR(S) + +Error 487 occurred at disk power-on lifetime: 7282 hours (303 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 01 bf 70 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x000070bf = 28863 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 04 01 bf 70 00 e0 00 00:01:08.352 READ DMA + 20 04 01 65 00 00 e0 00 00:01:08.337 READ SECTOR(S) + c8 04 01 65 00 00 e0 00 00:01:08.155 READ DMA + 20 04 01 bf 70 00 e0 00 00:01:01.023 READ SECTOR(S) + c8 04 01 bf 70 00 e0 00 00:01:00.880 READ DMA + +Error 486 occurred at disk power-on lifetime: 7282 hours (303 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 01 65 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000065 = 101 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 04 01 65 00 00 e0 00 00:01:08.155 READ DMA + 20 04 01 bf 70 00 e0 00 00:01:01.023 READ SECTOR(S) + c8 04 01 bf 70 00 e0 00 00:01:00.880 READ DMA + 20 04 01 65 00 00 e0 00 00:01:00.865 READ SECTOR(S) + c8 04 01 65 00 00 e0 00 00:01:00.323 READ DMA + +Error 485 occurred at disk power-on lifetime: 7282 hours (303 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 84 51 01 bf 70 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x000070bf = 28863 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 04 01 bf 70 00 e0 00 00:01:00.880 READ DMA + 20 04 01 65 00 00 e0 00 00:01:00.865 READ SECTOR(S) + c8 04 01 65 00 00 e0 00 00:01:00.323 READ DMA + 20 04 01 bf 70 00 e0 00 00:00:26.666 READ SECTOR(S) + c8 04 01 bf 70 00 e0 00 00:00:26.523 READ DMA + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/HDD/Toshiba/MK2018/MK2018GAP/CDC6BA4A52B6 b/HDD/Toshiba/MK2018/MK2018GAP/CDC6BA4A52B6 new file mode 100644 index 000000000..0dc7f47bd --- /dev/null +++ b/HDD/Toshiba/MK2018/MK2018GAP/CDC6BA4A52B6 @@ -0,0 +1,208 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD (10-20 GB) +Device Model: TOSHIBA MK2018GAP +Serial Number: -- +Firmware Version: M1.42 A +User Capacity: 20,003,880,960 bytes [20.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-5 (minor revision not indicated) +Local Time is: Wed Sep 16 23:09:11 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 212) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 24) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 979 + 4 Start_Stop_Count -O--CK 100 100 000 - 1340 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 31 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 093 093 000 - 3037 + 10 Spin_Retry_Count PO--CK 126 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1334 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 64 +193 Load_Cycle_Count -O--CK 089 089 000 - 118941 +196 Reallocated_Event_Count -O--CK 100 100 000 - 19 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 4200 +222 Loaded_Hours -O--CK 096 096 000 - 1880 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 353 +240 Head_Flying_Hours P----- 100 100 001 - 3 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +ATA Error Count: 212 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 212 occurred at disk power-on lifetime: 2914 hours (121 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 08 4a b7 e1 Error: UNC at LBA = 0x01b74a08 = 28789256 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 40 00 80 8f 49 b7 e1 00 00:23:25.810 READ VERIFY SECTOR(S) + 40 00 90 7f 49 b7 e1 00 00:23:16.981 READ VERIFY SECTOR(S) + 40 00 a0 6f 49 b7 e1 00 00:23:08.152 READ VERIFY SECTOR(S) + 40 00 b0 5f 49 b7 e1 00 00:22:59.352 READ VERIFY SECTOR(S) + 40 00 c0 4f 49 b7 e1 00 00:22:50.581 READ VERIFY SECTOR(S) + +Error 211 occurred at disk power-on lifetime: 2914 hours (121 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 08 4a b7 e1 Error: UNC at LBA = 0x01b74a08 = 28789256 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 40 00 90 7f 49 b7 e1 00 00:23:16.981 READ VERIFY SECTOR(S) + 40 00 a0 6f 49 b7 e1 00 00:23:08.152 READ VERIFY SECTOR(S) + 40 00 b0 5f 49 b7 e1 00 00:22:59.352 READ VERIFY SECTOR(S) + 40 00 c0 4f 49 b7 e1 00 00:22:50.581 READ VERIFY SECTOR(S) + 40 00 d0 3f 49 b7 e1 00 00:22:41.765 READ VERIFY SECTOR(S) + +Error 210 occurred at disk power-on lifetime: 2914 hours (121 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 08 4a b7 e1 Error: UNC at LBA = 0x01b74a08 = 28789256 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 40 00 a0 6f 49 b7 e1 00 00:23:08.152 READ VERIFY SECTOR(S) + 40 00 b0 5f 49 b7 e1 00 00:22:59.352 READ VERIFY SECTOR(S) + 40 00 c0 4f 49 b7 e1 00 00:22:50.581 READ VERIFY SECTOR(S) + 40 00 d0 3f 49 b7 e1 00 00:22:41.765 READ VERIFY SECTOR(S) + 40 00 f0 1f 4a b7 e1 00 00:22:41.738 READ VERIFY SECTOR(S) + +Error 209 occurred at disk power-on lifetime: 2914 hours (121 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 08 4a b7 e1 Error: UNC at LBA = 0x01b74a08 = 28789256 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 40 00 b0 5f 49 b7 e1 00 00:22:59.352 READ VERIFY SECTOR(S) + 40 00 c0 4f 49 b7 e1 00 00:22:50.581 READ VERIFY SECTOR(S) + 40 00 d0 3f 49 b7 e1 00 00:22:41.765 READ VERIFY SECTOR(S) + 40 00 f0 1f 4a b7 e1 00 00:22:41.738 READ VERIFY SECTOR(S) + 40 00 10 ff 49 b7 e1 00 00:22:32.938 READ VERIFY SECTOR(S) + +Error 208 occurred at disk power-on lifetime: 2914 hours (121 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 00 08 4a b7 e1 Error: UNC at LBA = 0x01b74a08 = 28789256 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 40 00 c0 4f 49 b7 e1 00 00:22:50.581 READ VERIFY SECTOR(S) + 40 00 d0 3f 49 b7 e1 00 00:22:41.765 READ VERIFY SECTOR(S) + 40 00 f0 1f 4a b7 e1 00 00:22:41.738 READ VERIFY SECTOR(S) + 40 00 10 ff 49 b7 e1 00 00:22:32.938 READ VERIFY SECTOR(S) + 40 00 30 df 49 b7 e1 00 00:22:24.109 READ VERIFY SECTOR(S) + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/HDD/Toshiba/MK3259/MK3259GSXP/3B4AB5F2AF60 b/HDD/Toshiba/MK3259/MK3259GSXP/3B4AB5F2AF60 new file mode 100644 index 000000000..dd05bc4b6 --- /dev/null +++ b/HDD/Toshiba/MK3259/MK3259GSXP/3B4AB5F2AF60 @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.0-RELEASE-p13 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MK..59GSXP (AF) +Device Model: TOSHIBA MK3259GSXP +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: GN003J +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 20 13:49:27 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 101) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1204 + 4 Start_Stop_Count -O--CK 100 100 000 - 2688 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 081 081 000 - 7838 + 10 Spin_Retry_Count PO--CK 153 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2247 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 22 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 78 +193 Load_Cycle_Count -O--CK 034 034 000 - 667772 +194 Temperature_Celsius -O---K 100 100 000 - 35 (Min/Max 12/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 53 +222 Loaded_Hours -O--CK 086 086 000 - 5903 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 312 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 22 hours (0 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + f2 00 00 00 01 00 00 00 00 00 00 00 00 00:01:46.264 SECURITY UNLOCK + f2 00 00 01 01 00 00 00 00 00 00 00 00 00:01:35.543 SECURITY UNLOCK + 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:32.372 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:32.349 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:32.349 READ DMA EXT + +Error 1 [0] occurred at disk power-on lifetime: 22 hours (0 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 01 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + f2 00 00 01 01 00 00 00 00 00 00 00 00 00:01:35.543 SECURITY UNLOCK + 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:32.372 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:32.349 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:32.349 READ DMA EXT + 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:32.349 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 25/39 Celsius +Lifetime Min/Max Temperature: 12/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (17) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/MK3265/MK3265GSXN/189EB0B35A89 b/HDD/Toshiba/MK3265/MK3265GSXN/189EB0B35A89 new file mode 100644 index 000000000..1de229958 --- /dev/null +++ b/HDD/Toshiba/MK3265/MK3265GSXN/189EB0B35A89 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MK..65GSX +Device Model: TOSHIBA MK3265GSXN +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: GH101M +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Jul 15 05:53:22 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 98) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1170 + 4 Start_Stop_Count -O--CK 100 100 000 - 1110 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 8 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 094 094 000 - 2733 + 10 Spin_Retry_Count PO--CK 122 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1105 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 31 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 17 +193 Load_Cycle_Count -O--CK 093 093 000 - 76022 +194 Temperature_Celsius -O---K 100 100 000 - 42 (Min/Max 11/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 2 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 21 +222 Loaded_Hours -O--CK 096 096 000 - 1765 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 306 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2 - +# 2 Short offline Completed without error 00% 2 - +# 3 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 26/42 Celsius +Lifetime Min/Max Temperature: 11/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (138) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/MK7575/MK7575GSX/8938C7C4843C b/HDD/Toshiba/MK7575/MK7575GSX/8938C7C4843C new file mode 100644 index 000000000..9197baad2 --- /dev/null +++ b/HDD/Toshiba/MK7575/MK7575GSX/8938C7C4843C @@ -0,0 +1,326 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MK..75GSX +Device Model: TOSHIBA MK7575GSX +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: GT001C +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Aug 29 16:15:00 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 248) Self-test routine in progress... + 80% of test remaining. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 179) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 2 Throughput_Performance POS--K 100 100 050 - 0 + 3 Spin_Up_Time PO---K 100 100 002 - 1996 + 4 Start_Stop_Count -O--CK 100 100 000 - 9464 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate POSR-K 100 100 050 - 0 + 8 Seek_Time_Performance P-S--K 100 100 050 - 0 + 9 Power_On_Hours -O--CK 064 064 000 - 14517 + 10 Spin_Retry_Count PO--CK 253 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 9224 +183 Runtime_Bad_Block -O--CK 100 100 001 - 127 +184 End-to-End_Error PO--CK 100 100 097 - 0 +185 Unknown_Attribute -O--CK 100 100 001 - 65535 +187 Reported_Uncorrect -O--CK 095 095 000 - 5 +188 Command_Timeout -O--CK 100 088 000 - 71 +189 High_Fly_Writes -O-RCK 100 100 001 - 0 +190 Airflow_Temperature_Cel -O---K 055 043 040 - 45 (Min/Max 30/45) +191 G-Sense_Error_Rate -O--CK 100 100 000 - 1676 +192 Power-Off_Retract_Count -O---K 100 100 000 - 6357089 +193 Load_Cycle_Count -O--CK 096 096 000 - 46450 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 9 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 9 [8] occurred at disk power-on lifetime: 14399 hours (599 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 2a 00 00 04 f8 ae 48 64 00 Error: UNC at LBA = 0x04f8ae48 = 83406408 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 28 00 00 04 f8 ad 58 40 00 00:02:53.881 READ FPDMA QUEUED + 60 00 08 00 20 00 00 04 cc ef f0 40 00 00:02:53.863 READ FPDMA QUEUED + 60 00 08 00 18 00 00 04 d9 d9 78 40 00 00:02:53.856 READ FPDMA QUEUED + 60 00 78 00 10 00 00 05 09 52 28 40 00 00:02:53.856 READ FPDMA QUEUED + 60 00 08 00 08 00 00 04 ed 18 d8 40 00 00:02:53.847 READ FPDMA QUEUED + +Error 8 [7] occurred at disk power-on lifetime: 14399 hours (599 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 92 00 00 04 f8 ae 48 64 00 Error: UNC at LBA = 0x04f8ae48 = 83406408 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 d8 00 00 04 ed 18 d8 40 00 00:02:49.682 READ FPDMA QUEUED + 61 00 08 00 d0 00 00 00 66 7a c0 40 00 00:02:49.682 WRITE FPDMA QUEUED + 60 00 78 00 c8 00 00 05 09 52 28 40 00 00:02:49.677 READ FPDMA QUEUED + 60 00 08 00 c0 00 00 04 cc ef f0 40 00 00:02:49.673 READ FPDMA QUEUED + 61 00 08 00 b8 00 00 04 1d 84 00 40 00 00:02:49.672 WRITE FPDMA QUEUED + +Error 7 [6] occurred at disk power-on lifetime: 14399 hours (599 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 f2 00 00 04 f8 ae 48 64 00 Error: UNC at LBA = 0x04f8ae48 = 83406408 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 10 00 00 04 f8 af 58 40 00 00:02:41.576 READ FPDMA QUEUED + 60 01 00 00 08 00 00 04 f8 ae 58 40 00 00:02:41.575 READ FPDMA QUEUED + 60 01 00 00 f8 00 00 00 ff 53 30 40 00 00:02:41.574 READ FPDMA QUEUED + 60 01 00 00 f0 00 00 04 f8 ad 58 40 00 00:02:41.574 READ FPDMA QUEUED + 60 00 80 00 e8 00 00 00 ff 52 b0 40 00 00:02:41.573 READ FPDMA QUEUED + +Error 6 [5] occurred at disk power-on lifetime: 14399 hours (599 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 b2 00 00 04 f8 ae 48 64 00 Error: UNC at LBA = 0x04f8ae48 = 83406408 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 b0 00 00 04 f8 ad 58 40 00 00:02:37.179 READ FPDMA QUEUED + 60 01 00 00 a8 00 00 04 f8 ae 58 40 00 00:02:37.179 READ FPDMA QUEUED + 60 01 00 00 a0 00 00 04 f8 af 58 40 00 00:02:37.179 READ FPDMA QUEUED + 60 00 90 00 98 00 00 04 f8 b0 58 40 00 00:02:37.179 READ FPDMA QUEUED + 61 00 08 00 90 00 00 00 63 f8 88 40 00 00:02:37.179 WRITE FPDMA QUEUED + +Error 5 [4] occurred at disk power-on lifetime: 14399 hours (599 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 62 00 00 04 f8 ae 48 64 00 Error: UNC at LBA = 0x04f8ae48 = 83406408 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 40 00 88 00 00 03 1e 3d 00 40 00 00:02:32.913 READ FPDMA QUEUED + 60 00 40 00 80 00 00 03 1e 3c c0 40 00 00:02:32.912 READ FPDMA QUEUED + 60 00 90 00 78 00 00 04 f8 b0 58 40 00 00:02:32.912 READ FPDMA QUEUED + 60 01 00 00 70 00 00 04 f8 af 58 40 00 00:02:32.912 READ FPDMA QUEUED + 60 01 00 00 68 00 00 04 f8 ae 58 40 00 00:02:32.912 READ FPDMA QUEUED + +Error 4 [3] occurred at disk power-on lifetime: 13528 hours (563 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 05 cd 1e 67 40 00 Error: ICRC, ABRT 1 sectors at LBA = 0x05cd1e67 = 97328743 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 00 80 00 00 05 cd 1d e8 40 00 00:02:05.244 WRITE DMA EXT + 35 00 00 00 80 00 00 05 cd 1d 68 40 00 00:02:05.241 WRITE DMA EXT + 35 00 00 00 80 00 00 05 cd 1c e8 40 00 00:02:05.237 WRITE DMA EXT + 35 00 00 00 80 00 00 05 cd 1c 68 40 00 00:02:05.234 WRITE DMA EXT + 35 00 00 00 80 00 00 05 cd 1b e8 40 00 00:02:05.230 WRITE DMA EXT + +Error 3 [2] occurred at disk power-on lifetime: 8326 hours (346 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 21 f1 cb 4f 40 00 Error: ICRC, ABRT 1 sectors at LBA = 0x21f1cb4f = 569494351 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 00 08 00 00 21 f1 cb 48 40 00 00:00:17.441 WRITE DMA EXT + 35 00 00 00 08 00 00 21 f1 cb 40 40 00 00:00:17.441 WRITE DMA EXT + 35 00 00 00 10 00 00 21 f1 cb 30 40 00 00:00:17.441 WRITE DMA EXT + 35 00 00 00 08 00 00 21 f1 cb 28 40 00 00:00:17.441 WRITE DMA EXT + 35 00 00 00 08 00 00 21 f1 cb 20 40 00 00:00:17.441 WRITE DMA EXT + +Error 2 [1] occurred at disk power-on lifetime: 2765 hours (115 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 10 7b 56 5f 40 00 Error: ICRC, ABRT 1 sectors at LBA = 0x107b565f = 276518495 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 35 00 00 00 80 00 00 10 7b 55 e0 40 00 00:01:27.167 WRITE DMA EXT + 35 00 00 00 80 00 00 10 7b 55 60 40 00 00:01:27.166 WRITE DMA EXT + 35 00 00 00 80 00 00 10 7b 54 e0 40 00 00:01:27.166 WRITE DMA EXT + 35 00 00 00 80 00 00 10 7b 54 60 40 00 00:01:27.165 WRITE DMA EXT + 35 00 00 00 80 00 00 10 7b 53 e0 40 00 00:01:27.165 WRITE DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 14427 - +# 2 Short offline Aborted by host 90% 14427 - +# 3 Short offline Aborted by host 90% 14384 - +# 4 Short offline Completed without error 00% 14334 - +# 5 Short offline Aborted by host 90% 14333 - +# 6 Short offline Aborted by host 90% 14333 - +# 7 Short offline Completed without error 00% 13996 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: DST executing in background (3) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 30/45 Celsius +Lifetime Min/Max Temperature: 2/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 0/60 Celsius +Temperature History Size (Index): 478 (75) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 12 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/MK8025/MK8025GAS/D3D3632FBAA4 b/HDD/Toshiba/MK8025/MK8025GAS/D3D3632FBAA4 new file mode 100644 index 000000000..09d799b22 --- /dev/null +++ b/HDD/Toshiba/MK8025/MK8025GAS/D3D3632FBAA4 @@ -0,0 +1,82 @@ +smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD (80 GB and above) +Device Model: TOSHIBA MK8025GAS +Serial Number: -- +Firmware Version: KA024A +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-6 (minor revision not indicated) +Local Time is: Tue Aug 11 01:40:33 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 375) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 75) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 + 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1361 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 206 + 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 120 + 10 Spin_Retry_Count 0x0033 103 100 030 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 98 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 13 +193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2260 +194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 33 (Min/Max 8/40) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +220 Disk_Shift 0x0002 100 100 000 Old_age Always - 47 +222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 104 +223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 +224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 +226 Load-in_Time 0x0026 100 100 000 Old_age Always - 216 +240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/HDD/Toshiba/MQ01/MQ01ABD100/26DB33073293 b/HDD/Toshiba/MQ01/MQ01ABD100/26DB33073293 new file mode 100644 index 000000000..c9ac360ba --- /dev/null +++ b/HDD/Toshiba/MQ01/MQ01ABD100/26DB33073293 @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MQ01ABD... +Device Model: TOSHIBA MQ01ABD100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: AX0P3D +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Sun Nov 1 15:37:11 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 244) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 128 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1727 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 094 094 000 - 2784 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1134 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 143 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 127 +193 Load_Cycle_Count -O--CK 096 096 000 - 41489 +194 Temperature_Celsius -O---K 100 100 000 - 50 (Min/Max 16/59) +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +240 Head_Flying_Hours -O--CK 095 095 000 - 2248 +241 Total_LBAs_Written -O--CK 100 100 000 - 11868223644 +242 Total_LBAs_Read -O--CK 100 100 000 - 11380225717 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 50 Celsius +Power Cycle Min/Max Temperature: 28/57 Celsius +Lifetime Min/Max Temperature: 16/59 Celsius +Specified Max Operating Temperature: 39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 15/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 478 (408) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1134 --- Lifetime Power-On Resets +0x01 0x010 4 2784 --- Power-on Hours +0x01 0x018 6 11868223644 --- Logical Sectors Written +0x01 0x020 6 100220808 --- Number of Write Commands +0x01 0x028 6 11380225717 --- Logical Sectors Read +0x01 0x030 6 132166109 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 143 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2745 --- Spindle Motor Power-on Hours +0x03 0x010 4 2248 --- Head Flying Hours +0x03 0x018 4 41489 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 50 --- Current Temperature +0x05 0x010 1 47 N-- Average Short Term Temperature +0x05 0x018 1 46 N-- Average Long Term Temperature +0x05 0x020 1 59 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 52 N-- Highest Average Short Term Temperature +0x05 0x038 1 28 N-- Lowest Average Short Term Temperature +0x05 0x040 1 46 N-- Highest Average Long Term Temperature +0x05 0x048 1 32 N-- Lowest Average Long Term Temperature +0x05 0x050 4 1691 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 15 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2470 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 0 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/MQ01/MQ01ABD100/5CA3A23D6B14 b/HDD/Toshiba/MQ01/MQ01ABD100/5CA3A23D6B14 new file mode 100644 index 000000000..fc0d730d8 --- /dev/null +++ b/HDD/Toshiba/MQ01/MQ01ABD100/5CA3A23D6B14 @@ -0,0 +1,385 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MQ01ABD... +Device Model: TOSHIBA MQ01ABD100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: AX003F +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 23 20:51:41 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 231) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1698 + 4 Start_Stop_Count -O--CK 100 100 000 - 13146 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 072 072 000 - 11477 + 10 Spin_Retry_Count PO--CK 253 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5422 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 350 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 184 +193 Load_Cycle_Count -O--CK 094 094 000 - 68978 +194 Temperature_Celsius -O---K 100 100 000 - 30 (Min/Max 9/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 712 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 076 076 000 - 9783 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 263 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 12350 (device log contains only the most recent 256 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 12350 [61] occurred at disk power-on lifetime: 11468 hours (477 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 68 00 00 02 9f 19 78 40 00 Error: WP at LBA = 0x029f1978 = 43981176 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 70 00 00 00 48 0e 78 40 00 00:02:01.070 WRITE FPDMA QUEUED + 61 00 10 00 60 00 00 00 66 35 58 40 00 00:02:01.067 WRITE FPDMA QUEUED + 61 00 08 00 58 00 00 00 66 35 18 40 00 00:02:01.066 WRITE FPDMA QUEUED + 61 00 08 00 50 00 00 00 66 34 f8 40 00 00:02:01.066 WRITE FPDMA QUEUED + 61 00 08 00 48 00 00 00 66 33 c0 40 00 00:02:01.066 WRITE FPDMA QUEUED + +Error 12349 [60] occurred at disk power-on lifetime: 11468 hours (477 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 f8 00 00 02 9f 19 70 40 00 Error: WP at LBA = 0x029f1970 = 43981168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 50 00 00 00 65 a1 50 40 00 00:01:57.430 WRITE FPDMA QUEUED + 61 00 08 00 48 00 00 00 65 44 30 40 00 00:01:57.430 WRITE FPDMA QUEUED + 61 00 08 00 40 00 00 00 65 2d e8 40 00 00:01:57.429 WRITE FPDMA QUEUED + 61 00 08 00 38 00 00 00 65 2b 70 40 00 00:01:57.429 WRITE FPDMA QUEUED + 61 00 08 00 30 00 00 00 65 20 a8 40 00 00:01:57.428 WRITE FPDMA QUEUED + +Error 12348 [59] occurred at disk power-on lifetime: 11468 hours (477 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 02 9f 19 68 40 00 Error: WP at LBA = 0x029f1968 = 43981160 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 e0 00 00 00 64 56 88 40 00 00:01:53.641 WRITE FPDMA QUEUED + 61 00 20 00 d8 00 00 00 64 56 60 40 00 00:01:53.641 WRITE FPDMA QUEUED + 61 00 08 00 d0 00 00 00 64 55 f8 40 00 00:01:53.640 WRITE FPDMA QUEUED + 61 00 18 00 c8 00 00 00 64 55 d0 40 00 00:01:53.640 WRITE FPDMA QUEUED + 61 00 08 00 c0 00 00 00 64 55 b8 40 00 00:01:53.639 WRITE FPDMA QUEUED + +Error 12347 [58] occurred at disk power-on lifetime: 11468 hours (477 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 28 00 00 02 9f 19 60 40 00 Error: WP at LBA = 0x029f1960 = 43981152 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 78 00 00 1d fe dd f0 40 00 00:01:49.876 WRITE FPDMA QUEUED + 61 00 08 00 70 00 00 1d fe c9 18 40 00 00:01:49.875 WRITE FPDMA QUEUED + 61 00 08 00 68 00 00 1d fe b8 f0 40 00 00:01:49.875 WRITE FPDMA QUEUED + 61 00 08 00 60 00 00 1d fe b0 b0 40 00 00:01:49.874 WRITE FPDMA QUEUED + 61 00 08 00 58 00 00 1d fd 0d 98 40 00 00:01:49.873 WRITE FPDMA QUEUED + +Error 12346 [57] occurred at disk power-on lifetime: 11468 hours (477 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 98 00 00 02 9f 19 58 40 00 Error: WP at LBA = 0x029f1958 = 43981144 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 f8 00 00 00 68 59 48 40 00 00:01:46.265 WRITE FPDMA QUEUED + 61 00 20 00 f0 00 00 00 60 bf e8 40 00 00:01:46.264 WRITE FPDMA QUEUED + 61 00 10 00 e8 00 00 00 68 58 e0 40 00 00:01:46.264 WRITE FPDMA QUEUED + 61 00 08 00 e0 00 00 00 63 a8 08 40 00 00:01:46.264 WRITE FPDMA QUEUED + 61 00 08 00 d8 00 00 00 68 58 c0 40 00 00:01:46.264 WRITE FPDMA QUEUED + +Error 12345 [56] occurred at disk power-on lifetime: 11468 hours (477 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 40 00 00 02 9f 19 50 40 00 Error: WP at LBA = 0x029f1950 = 43981136 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 58 00 00 00 68 4e 48 40 00 00:01:42.710 WRITE FPDMA QUEUED + 60 00 78 00 50 00 00 01 59 53 e8 40 00 00:01:42.709 READ FPDMA QUEUED + 61 00 10 00 48 00 00 00 60 bf c0 40 00 00:01:42.709 WRITE FPDMA QUEUED + 60 00 08 00 40 00 00 02 9f 19 50 40 00 00:01:42.709 READ FPDMA QUEUED + 61 00 08 00 38 00 00 00 0f 4c 30 40 00 00:01:42.709 WRITE FPDMA QUEUED + +Error 12344 [55] occurred at disk power-on lifetime: 11468 hours (477 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 d0 00 00 02 9f 19 48 40 00 Error: WP at LBA = 0x029f1948 = 43981128 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 e8 00 00 00 68 4d b0 40 00 00:01:39.091 WRITE FPDMA QUEUED + 61 00 08 00 e0 00 00 00 60 bf b0 40 00 00:01:39.091 WRITE FPDMA QUEUED + 60 00 80 00 d8 00 00 04 8e 6c c0 40 00 00:01:39.091 READ FPDMA QUEUED + 60 00 08 00 d0 00 00 02 9f 19 48 40 00 00:01:39.090 READ FPDMA QUEUED + 61 00 10 00 c8 00 00 00 08 08 28 40 00 00:01:39.090 WRITE FPDMA QUEUED + +Error 12343 [54] occurred at disk power-on lifetime: 11468 hours (477 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 30 00 00 02 9f 19 40 40 00 Error: UNC at LBA = 0x029f1940 = 43981120 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 80 00 60 00 00 18 a0 fd 00 40 00 00:01:35.447 READ FPDMA QUEUED + 61 00 08 00 58 00 00 00 68 45 40 40 00 00:01:35.447 WRITE FPDMA QUEUED + 61 00 08 00 50 00 00 0c b5 e5 d8 40 00 00:01:35.447 WRITE FPDMA QUEUED + 61 00 08 00 48 00 00 00 bd 03 10 40 00 00:01:35.447 WRITE FPDMA QUEUED + 61 00 08 00 40 00 00 00 68 44 68 40 00 00:01:35.446 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8500 - +# 2 Short offline Completed without error 00% 8016 - +# 3 Short offline Completed without error 00% 8013 - +# 4 Short offline Completed without error 00% 8003 - +# 5 Short offline Completed without error 00% 7990 - +# 6 Short offline Completed without error 00% 7985 - +# 7 Short offline Aborted by host 60% 7972 - +# 8 Short offline Completed without error 00% 7961 - +# 9 Short offline Completed without error 00% 7952 - +#10 Short offline Completed without error 00% 7945 - +#11 Short offline Completed without error 00% 7935 - +#12 Short offline Aborted by host 70% 7927 - +#13 Short offline Completed without error 00% 7918 - +#14 Short offline Completed without error 00% 7910 - +#15 Short offline Completed without error 00% 7898 - +#16 Short offline Completed without error 00% 7886 - +#17 Short offline Completed without error 00% 7880 - +#18 Short offline Completed without error 00% 7866 - +#19 Short offline Completed without error 00% 7855 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 23/32 Celsius +Lifetime Min/Max Temperature: 10/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (122) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 5422 --- Lifetime Power-On Resets +0x01 0x010 4 11477 --- Power-on Hours +0x01 0x018 6 96284108297 --- Logical Sectors Written +0x01 0x020 6 944246310 --- Number of Write Commands +0x01 0x028 6 71056727386 --- Logical Sectors Read +0x01 0x030 6 939794827 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 350 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8222 --- Spindle Motor Power-on Hours +0x03 0x010 4 9783 --- Head Flying Hours +0x03 0x018 4 68978 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 205 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 12226 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 17 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 37 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 10 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 38 N-- Highest Average Long Term Temperature +0x05 0x048 1 34 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 32868 --- Number of Hardware Resets +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 19 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MQ01/MQ01ABD100/B6F9BDDC1FBF b/HDD/Toshiba/MQ01/MQ01ABD100/B6F9BDDC1FBF new file mode 100644 index 000000000..d06a59014 --- /dev/null +++ b/HDD/Toshiba/MQ01/MQ01ABD100/B6F9BDDC1FBF @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MQ01ABD... +Device Model: TOSHIBA MQ01ABD100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: AX0P3D +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 14:01:39 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 25) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 243) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 128 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1749 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 094 094 000 - 2445 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2276 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 121 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 11 +193 Load_Cycle_Count -O--CK 100 100 000 - 6856 +194 Temperature_Celsius -O---K 100 100 000 - 30 (Min/Max 15/42) +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +240 Head_Flying_Hours -O--CK 095 095 000 - 2103 +241 Total_LBAs_Written -O--CK 100 100 000 - 3273577315 +242 Total_LBAs_Read -O--CK 100 100 000 - 4521339613 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 90% 8 - +# 2 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 29/30 Celsius +Lifetime Min/Max Temperature: 15/42 Celsius +Specified Max Operating Temperature: 28 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 15/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 478 (86) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2276 --- Lifetime Power-On Resets +0x01 0x010 4 2445 --- Power-on Hours +0x01 0x018 6 3273577315 --- Logical Sectors Written +0x01 0x020 6 54863911 --- Number of Write Commands +0x01 0x028 6 4521339613 --- Logical Sectors Read +0x01 0x030 6 85815525 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 121 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2440 --- Spindle Motor Power-on Hours +0x03 0x010 4 2103 --- Head Flying Hours +0x03 0x018 4 6856 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 29 N-- Average Short Term Temperature +0x05 0x018 1 28 N-- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 33 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 29 N-- Highest Average Long Term Temperature +0x05 0x048 1 27 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 6 --- Time in Under-Temperature +0x05 0x068 1 15 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3678 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/MQ01/MQ01ABD100/E526480D5330 b/HDD/Toshiba/MQ01/MQ01ABD100/E526480D5330 new file mode 100644 index 000000000..d49d74cc9 --- /dev/null +++ b/HDD/Toshiba/MQ01/MQ01ABD100/E526480D5330 @@ -0,0 +1,225 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MQ01ABD... +Device Model: TOSHIBA MQ01ABD100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: AX0P2D +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Sep 12 07:04:34 2020 +0545 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 233) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 128 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1721 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 084 084 000 - 6600 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4751 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 159 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 247 +193 Load_Cycle_Count -O--CK 095 095 000 - 56941 +194 Temperature_Celsius -O---K 100 100 000 - 32 (Min/Max 7/47) +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 148158850 +200 Multi_Zone_Error_Rate -O--CK 100 100 000 - 451193914 +240 Head_Flying_Hours -O--CK 086 086 000 - 5811 +241 Total_LBAs_Written -O--CK 100 100 000 - 48442000093 +242 Total_LBAs_Read -O--CK 100 100 000 - 59486311001 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6586 - +# 2 Short offline Completed without error 00% 6570 - +# 3 Short offline Completed without error 00% 6554 - +# 4 Short offline Completed without error 00% 6537 - +# 5 Short offline Completed without error 00% 6520 - +# 6 Short offline Completed without error 00% 6497 - +# 7 Short offline Completed without error 00% 6483 - +# 8 Short offline Completed without error 00% 6461 - +# 9 Short offline Completed without error 00% 6448 - +#10 Short offline Completed without error 00% 6435 - +#11 Short offline Completed without error 00% 6418 - +#12 Short offline Completed without error 00% 6404 - +#13 Short offline Aborted by host 90% 6383 - +#14 Short offline Aborted by host 90% 6383 - +#15 Short offline Completed without error 00% 6382 - +#16 Short offline Completed without error 00% 6366 - +#17 Short offline Completed without error 00% 6353 - +#18 Short offline Completed without error 00% 6342 - +#19 Short offline Completed without error 00% 6332 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 24/32 Celsius +Lifetime Min/Max Temperature: 7/47 Celsius +Specified Max Operating Temperature: 31 Celsius +Under/Over Temperature Limit Count: 13/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 15/55 Celsius +Min/Max Temperature Limit: 10/60 Celsius +Temperature History Size (Index): 478 (17) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 4751 --- Lifetime Power-On Resets +0x01 0x010 4 6600 --- Power-on Hours +0x01 0x018 6 48442000095 --- Logical Sectors Written +0x01 0x020 6 722283838 --- Number of Write Commands +0x01 0x028 6 59486311001 --- Logical Sectors Read +0x01 0x030 6 811037412 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 159 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6403 --- Spindle Motor Power-on Hours +0x03 0x010 4 5811 --- Head Flying Hours +0x03 0x018 4 56941 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 38 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 7 --- Lowest Temperature +0x05 0x030 1 39 N-- Highest Average Short Term Temperature +0x05 0x038 1 22 N-- Lowest Average Short Term Temperature +0x05 0x040 1 34 N-- Highest Average Long Term Temperature +0x05 0x048 1 26 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 1446 --- Time in Under-Temperature +0x05 0x068 1 15 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8887 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/MQ01/MQ01ABD100H/E352007C55A3 b/HDD/Toshiba/MQ01/MQ01ABD100H/E352007C55A3 new file mode 100644 index 000000000..7f9a4e049 --- /dev/null +++ b/HDD/Toshiba/MQ01/MQ01ABD100H/E352007C55A3 @@ -0,0 +1,216 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA MQ01ABD100H +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: AUF02A +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:17:00 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 242) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 2308 + 4 Start_Stop_Count -O--CK 100 100 000 - 241 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 47286 + 10 Spin_Retry_Count PO--CK 104 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 241 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 3 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 100 +193 Load_Cycle_Count -O--CK 080 080 000 - 209135 +194 Temperature_Celsius -O---K 100 100 000 - 30 (Min/Max 16/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 086 086 000 - 5608 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 259 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 27/38 Celsius +Lifetime Min/Max Temperature: 16/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (48) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 241 --- Lifetime Power-On Resets +0x01 0x010 4 47286 --- Power-on Hours +0x01 0x018 6 31450795101 --- Logical Sectors Written +0x01 0x020 6 615546292 --- Number of Write Commands +0x01 0x028 6 189234625559 --- Logical Sectors Read +0x01 0x030 6 1169449909 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 3 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 26524 --- Spindle Motor Power-on Hours +0x03 0x010 4 5608 --- Head Flying Hours +0x03 0x018 4 209135 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 20 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 30 N-- Average Short Term Temperature +0x05 0x018 1 31 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 36 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 34 N-- Highest Average Long Term Temperature +0x05 0x048 1 26 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2235 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 78 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MQ01/MQ01ABF050/02C2C2A9C9E2 b/HDD/Toshiba/MQ01/MQ01ABF050/02C2C2A9C9E2 new file mode 100644 index 000000000..492984d94 --- /dev/null +++ b/HDD/Toshiba/MQ01/MQ01ABF050/02C2C2A9C9E2 @@ -0,0 +1,245 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MQ01ABF... +Device Model: TOSHIBA MQ01ABF050 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: AM0B1J +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 16:03:23 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 1 (minimum power consumption with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 118) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1374 + 4 Start_Stop_Count -O--CK 100 100 000 - 10438 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 096 096 000 - 1619 + 10 Spin_Retry_Count PO--CK 253 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1298 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 273 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 25 +193 Load_Cycle_Count -O--CK 097 097 000 - 30456 +194 Temperature_Celsius -O---K 100 100 000 - 20 (Min/Max 15/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 1 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 097 097 000 - 1420 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 176 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 10 00 00 00 35 cd 08 40 00 Error: ICRC, ABRT at LBA = 0x0035cd08 = 3525896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 b0 00 10 00 00 00 35 cc 59 40 00 00:07:31.579 READ FPDMA QUEUED + 60 01 00 00 08 00 00 00 35 cb 59 40 00 00:07:31.579 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 35 ca 59 40 00 00:07:31.579 READ FPDMA QUEUED + 60 00 18 00 10 00 00 00 35 ca 31 40 00 00:07:31.577 READ FPDMA QUEUED + 60 01 00 00 08 00 00 00 35 c9 31 40 00 00:07:31.577 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 20 Celsius +Power Cycle Min/Max Temperature: 18/20 Celsius +Lifetime Min/Max Temperature: 15/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (401) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1298 --- Lifetime Power-On Resets +0x01 0x010 4 1619 --- Power-on Hours +0x01 0x018 6 7096601972 --- Logical Sectors Written +0x01 0x020 6 130760626 --- Number of Write Commands +0x01 0x028 6 9764772829 --- Logical Sectors Read +0x01 0x030 6 159432558 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 273 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 896 --- Spindle Motor Power-on Hours +0x03 0x010 4 1420 --- Head Flying Hours +0x03 0x018 4 30456 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 20 --- Current Temperature +0x05 0x010 1 24 N-- Average Short Term Temperature +0x05 0x018 1 29 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 34 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 31 N-- Highest Average Long Term Temperature +0x05 0x048 1 29 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 11610 --- Number of Hardware Resets +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/MQ01/MQ01ABF050/F59E3F5BD2CA b/HDD/Toshiba/MQ01/MQ01ABF050/F59E3F5BD2CA new file mode 100644 index 000000000..8d4a542eb --- /dev/null +++ b/HDD/Toshiba/MQ01/MQ01ABF050/F59E3F5BD2CA @@ -0,0 +1,281 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MQ01ABF... +Device Model: TOSHIBA MQ01ABF050 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: AM001J +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Nov 1 11:01:39 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 1 (minimum power consumption with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 121) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1338 + 4 Start_Stop_Count -O--CK 100 100 000 - 7119 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 1579 + 10 Spin_Retry_Count PO--CK 240 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2827 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 922 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 232 +193 Load_Cycle_Count -O--CK 099 099 000 - 12006 +194 Temperature_Celsius -O---K 100 100 000 - 26 (Min/Max 14/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 097 097 000 - 1562 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 185 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 3 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3 [2] occurred at disk power-on lifetime: 768 hours (32 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 90 00 00 00 5f 33 c0 40 00 Error: UNC at LBA = 0x005f33c0 = 6239168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 90 00 00 00 5f 33 c0 40 00 00:00:21.077 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:00:21.077 READ LOG EXT + 60 00 08 00 88 00 00 00 5f 33 c0 40 00 00:00:17.314 READ FPDMA QUEUED + 60 00 08 00 80 00 00 00 5f 33 b8 40 00 00:00:17.314 READ FPDMA QUEUED + 60 00 08 00 78 00 00 00 5f 33 b0 40 00 00:00:17.314 READ FPDMA QUEUED + +Error 2 [1] occurred at disk power-on lifetime: 768 hours (32 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 00 5f 33 c0 40 00 Error: UNC at LBA = 0x005f33c0 = 6239168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 88 00 00 00 5f 33 c0 40 00 00:00:17.314 READ FPDMA QUEUED + 60 00 08 00 80 00 00 00 5f 33 b8 40 00 00:00:17.314 READ FPDMA QUEUED + 60 00 08 00 78 00 00 00 5f 33 b0 40 00 00:00:17.314 READ FPDMA QUEUED + 60 00 08 00 70 00 00 00 5f 33 a8 40 00 00:00:17.314 READ FPDMA QUEUED + 60 00 08 00 68 00 00 00 5f 33 a0 40 00 00:00:17.301 READ FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 768 hours (32 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 20 00 00 00 5f 33 c0 40 00 Error: WP at LBA = 0x005f33c0 = 6239168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 10 00 40 00 00 00 03 a8 00 40 00 00:00:13.504 WRITE FPDMA QUEUED + 60 00 20 00 38 00 00 3a 28 b8 00 40 00 00:00:13.496 READ FPDMA QUEUED + 60 00 40 00 30 00 00 00 5f 34 30 40 00 00:00:13.496 READ FPDMA QUEUED + 60 00 10 00 28 00 00 3a 28 b8 00 40 00 00:00:13.472 READ FPDMA QUEUED + 60 00 50 00 20 00 00 00 5f 33 a0 40 00 00:00:13.472 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1577 - +# 2 Short offline Aborted by host 30% 10 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 22/26 Celsius +Lifetime Min/Max Temperature: 14/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (271) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2827 --- Lifetime Power-On Resets +0x01 0x010 4 1579 --- Power-on Hours +0x01 0x018 6 9148768545 --- Logical Sectors Written +0x01 0x020 6 164857027 --- Number of Write Commands +0x01 0x028 6 15206897263 --- Logical Sectors Read +0x01 0x030 6 219497005 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 922 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 522 --- Spindle Motor Power-on Hours +0x03 0x010 4 1562 --- Head Flying Hours +0x03 0x018 4 12006 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 32 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 36 N-- Highest Average Short Term Temperature +0x05 0x038 1 30 N-- Lowest Average Short Term Temperature +0x05 0x040 1 33 N-- Highest Average Long Term Temperature +0x05 0x048 1 32 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8339 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/HDD/Toshiba/MQ01/MQ01UBB200/B7D7A829BA60 b/HDD/Toshiba/MQ01/MQ01UBB200/B7D7A829BA60 new file mode 100644 index 000000000..ebb67906e --- /dev/null +++ b/HDD/Toshiba/MQ01/MQ01UBB200/B7D7A829BA60 @@ -0,0 +1,216 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MQ01UBB... (USB 3.0) +Device Model: TOSHIBA MQ01UBB200 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: AY000U +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 30 07:09:26 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 479) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 5066 + 4 Start_Stop_Count -O--CK 100 100 000 - 1763 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 036 036 000 - 25628 + 10 Spin_Retry_Count PO--CK 135 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 58 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 5 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 8 +193 Load_Cycle_Count -O--CK 100 100 000 - 2588 +194 Temperature_Celsius -O---K 100 100 000 - 25 (Min/Max 13/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 099 099 000 - 612 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 178 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 17/31 Celsius +Lifetime Min/Max Temperature: 13/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/55 Celsius +Min/Max Temperature Limit: 5/55 Celsius +Temperature History Size (Index): 478 (131) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 25628 --- Power-on Hours +0x01 0x018 6 10456700931 --- Logical Sectors Written +0x01 0x020 6 124972332 --- Number of Write Commands +0x01 0x028 6 12971335798 --- Logical Sectors Read +0x01 0x030 6 102287833 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 5 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 78185569 --- Spindle Motor Power-on Hours +0x03 0x010 4 612 --- Head Flying Hours +0x03 0x018 4 2588 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 24 N-- Average Short Term Temperature +0x05 0x018 1 22 N-- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 16 N-- Lowest Average Short Term Temperature +0x05 0x040 1 32 N-- Highest Average Long Term Temperature +0x05 0x048 1 18 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 32 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 42 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 1043748 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 0 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MQ02/MQ02ABD100H/7310CE5C9FA9 b/HDD/Toshiba/MQ02/MQ02ABD100H/7310CE5C9FA9 new file mode 100644 index 000000000..53a3c3e88 --- /dev/null +++ b/HDD/Toshiba/MQ02/MQ02ABD100H/7310CE5C9FA9 @@ -0,0 +1,361 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA MQ02ABD100H +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: HEF01D +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 28 16:15:04 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 213) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 128 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 2760 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 64 + 9 Power_On_Hours -O--CK 080 080 000 - 8383 + 12 Power_Cycle_Count -O--CK 100 100 000 - 671 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 51 +193 Load_Cycle_Count -O--CK 066 066 000 - 347591 +194 Temperature_Celsius -O---K 100 100 000 - 28 (Min/Max 16/44) +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +240 Head_Flying_Hours -O--CK 092 092 000 - 3208 +241 Total_LBAs_Written -O--CK 100 100 000 - 12722944112 +242 Total_LBAs_Read -O--CK 100 100 000 - 11961272298 +254 Free_Fall_Sensor -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 3562 (device log contains only the most recent 256 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3562 [233] occurred at disk power-on lifetime: 8136 hours (339 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 e0 00 00 52 2e 1e e8 40 00 Error: WP at LBA = 0x522e1ee8 = 1378754280 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 38 00 00 3e 6a 08 38 40 00 00:04:25.155 WRITE FPDMA QUEUED + 61 01 00 00 30 00 00 3e 6a 07 38 40 00 00:04:25.155 WRITE FPDMA QUEUED + 61 01 00 00 28 00 00 3e 6a 06 38 40 00 00:04:25.155 WRITE FPDMA QUEUED + 61 01 00 00 20 00 00 3e 6a 05 38 40 00 00:04:25.155 WRITE FPDMA QUEUED + 61 01 00 00 18 00 00 3e 6a 04 38 40 00 00:04:25.155 WRITE FPDMA QUEUED + +Error 3561 [232] occurred at disk power-on lifetime: 8136 hours (339 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 08 00 00 52 2e 1e a8 40 00 Error: WP at LBA = 0x522e1ea8 = 1378754216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 78 00 78 00 00 00 5d d3 f8 40 00 00:04:24.891 WRITE FPDMA QUEUED + 61 01 00 00 80 00 00 3e 69 f0 38 40 00 00:04:21.738 WRITE FPDMA QUEUED + 61 01 00 00 78 00 00 3e 69 ef 38 40 00 00:04:21.738 WRITE FPDMA QUEUED + 61 01 00 00 28 00 00 3e 69 ee 38 40 00 00:04:21.738 WRITE FPDMA QUEUED + 61 01 00 00 20 00 00 3e 69 ed 38 40 00 00:04:21.738 WRITE FPDMA QUEUED + +Error 3560 [231] occurred at disk power-on lifetime: 8136 hours (339 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 70 00 00 52 2e 1e a8 40 00 Error: WP at LBA = 0x522e1ea8 = 1378754216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 18 00 00 3e 68 08 38 40 00 00:04:10.422 WRITE FPDMA QUEUED + 61 01 00 00 10 00 00 3e 68 07 38 40 00 00:04:10.422 WRITE FPDMA QUEUED + 61 01 00 00 08 00 00 3e 68 06 38 40 00 00:04:10.422 WRITE FPDMA QUEUED + 61 01 00 00 f8 00 00 3e 68 05 38 40 00 00:04:10.422 WRITE FPDMA QUEUED + 61 01 00 00 f0 00 00 3e 68 04 38 40 00 00:04:10.422 WRITE FPDMA QUEUED + +Error 3559 [230] occurred at disk power-on lifetime: 7023 hours (292 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 98 00 00 00 01 29 10 40 00 Error: UNC at LBA = 0x00012910 = 76048 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 98 00 00 00 01 29 10 40 00 05:08:39.406 READ FPDMA QUEUED + 60 00 08 00 90 00 00 00 01 29 08 40 00 05:08:39.406 READ FPDMA QUEUED + 60 00 08 00 78 00 00 00 01 29 00 40 00 05:08:39.403 READ FPDMA QUEUED + 47 00 00 00 01 00 00 00 00 00 12 a0 00 05:08:39.403 READ LOG DMA EXT + 47 00 00 00 01 00 00 00 00 00 00 a0 00 05:08:39.402 READ LOG DMA EXT + +Error 3558 [229] occurred at disk power-on lifetime: 7023 hours (292 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 88 00 00 00 01 29 10 40 00 Error: UNC at LBA = 0x00012910 = 76048 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 40 00 88 00 00 00 01 29 00 40 00 05:08:35.043 READ FPDMA QUEUED + 60 00 40 00 80 00 00 00 00 29 00 40 00 05:08:35.010 READ FPDMA QUEUED + 60 00 08 00 78 00 00 74 70 67 f8 40 00 05:08:35.010 READ FPDMA QUEUED + 60 00 40 00 70 00 00 00 00 18 00 40 00 05:08:35.010 READ FPDMA QUEUED + 60 00 40 00 68 00 00 00 00 10 00 40 00 05:08:35.009 READ FPDMA QUEUED + +Error 3557 [228] occurred at disk power-on lifetime: 6975 hours (290 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 08 00 00 00 b2 92 70 40 00 Error: UNC at LBA = 0x00b29270 = 11702896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 80 00 08 00 00 00 b2 92 10 40 00 00:01:18.422 READ FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:01:18.422 SET FEATURES [Enable write cache] + aa aa aa aa aa aa aa aa aa aa aa aa ff 00:01:18.402 [RESERVED] + 60 00 80 00 08 00 00 00 b2 92 10 40 00 00:01:18.173 READ FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:01:18.172 SET FEATURES [Enable write cache] + +Error 3556 [227] occurred at disk power-on lifetime: 6975 hours (290 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 08 00 00 00 b2 92 70 40 00 Error: UNC at LBA = 0x00b29270 = 11702896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 80 00 08 00 00 00 b2 92 10 40 00 00:01:18.173 READ FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:01:18.172 SET FEATURES [Enable write cache] + aa aa aa aa aa aa aa aa aa aa aa aa ff 00:01:18.147 [RESERVED] + 60 00 80 00 08 00 00 00 b2 92 10 40 00 00:01:17.908 READ FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:01:17.907 SET FEATURES [Enable write cache] + +Error 3555 [226] occurred at disk power-on lifetime: 6975 hours (290 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 41 00 08 00 00 00 b2 92 70 40 00 Error: UNC at LBA = 0x00b29270 = 11702896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 80 00 08 00 00 00 b2 92 10 40 00 00:01:17.908 READ FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:01:17.907 SET FEATURES [Enable write cache] + aa aa aa aa aa aa aa aa aa aa aa aa ff 00:01:17.880 [RESERVED] + 60 00 80 00 08 00 00 00 b2 92 10 40 00 00:01:17.642 READ FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:01:17.642 SET FEATURES [Enable write cache] + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 20/28 Celsius +Lifetime Min/Max Temperature: 16/44 Celsius +Specified Max Operating Temperature: 31 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: 5/60 Celsius +Temperature History Size (Index): 478 (123) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 671 --- Lifetime Power-On Resets +0x01 0x010 4 8382 --- Power-on Hours +0x01 0x018 6 12722944112 --- Logical Sectors Written +0x01 0x020 6 266306177 --- Number of Write Commands +0x01 0x028 6 11961272298 --- Logical Sectors Read +0x01 0x030 6 132961646 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 0 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 7984 --- Spindle Motor Power-on Hours +0x03 0x010 4 3208 --- Head Flying Hours +0x03 0x018 4 347591 --- Head Load Events +0x03 0x020 4 64 --- Number of Reallocated Logical Sectors +0x03 0x028 4 25 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 851 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 24 N-- Average Short Term Temperature +0x05 0x018 1 28 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 37 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 33 N-- Highest Average Long Term Temperature +0x05 0x048 1 27 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4327 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MQ04/MQ04ABF100/2953B086DE7C b/HDD/Toshiba/MQ04/MQ04ABF100/2953B086DE7C new file mode 100644 index 000000000..e80ef74e1 --- /dev/null +++ b/HDD/Toshiba/MQ04/MQ04ABF100/2953B086DE7C @@ -0,0 +1,222 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA MQ04ABF100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: JU0A0E +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 9 13:23:52 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 176) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1240 + 4 Start_Stop_Count -O--CK 100 100 000 - 38 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 46 + 10 Spin_Retry_Count PO--CK 100 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 34 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 4 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 8 +193 Load_Cycle_Count -O--CK 100 100 000 - 178 +194 Temperature_Celsius -O---K 100 100 000 - 30 (Min/Max 17/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +206 Flying_Height -----K 100 100 000 - 17044 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 100 100 000 - 10 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 251 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 45056 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 17/30 Celsius +Lifetime Min/Max Temperature: 17/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 0/60 Celsius +Temperature History Size (Index): 478 (205) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 34 --- Lifetime Power-On Resets +0x01 0x010 4 46 --- Power-on Hours +0x01 0x018 6 3207611342 --- Logical Sectors Written +0x01 0x020 6 13013393 --- Number of Write Commands +0x01 0x028 6 60010695 --- Logical Sectors Read +0x01 0x030 6 619911 --- Number of Read Commands +0x01 0x038 6 166506435 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 4 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 45 --- Spindle Motor Power-on Hours +0x03 0x010 4 10 --- Head Flying Hours +0x03 0x018 4 179 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 8 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 34 N-- Average Short Term Temperature +0x05 0x018 1 - N-- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 34 N-- Highest Average Short Term Temperature +0x05 0x038 1 34 N-- Lowest Average Short Term Temperature +0x05 0x040 1 - N-- Highest Average Long Term Temperature +0x05 0x048 1 - N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 188 --- Number of Hardware Resets +0x06 0x010 4 65 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MQ04/MQ04ABF100/7B566C07648D b/HDD/Toshiba/MQ04/MQ04ABF100/7B566C07648D new file mode 100644 index 000000000..68b1acb90 --- /dev/null +++ b/HDD/Toshiba/MQ04/MQ04ABF100/7B566C07648D @@ -0,0 +1,222 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA MQ04ABF100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: JU000A +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Jul 5 10:16:43 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 170) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1331 + 4 Start_Stop_Count -O--CK 100 100 000 - 1545 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 093 093 000 - 3034 + 10 Spin_Retry_Count PO--CK 130 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1271 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 2177 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 180 +193 Load_Cycle_Count -O--CK 100 100 000 - 6056 +194 Temperature_Celsius -O---K 100 100 000 - 35 (Min/Max 3/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 093 093 000 - 2818 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 268 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 2 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 32768 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 23/35 Celsius +Lifetime Min/Max Temperature: 3/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 0/60 Celsius +Temperature History Size (Index): 478 (220) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1271 --- Lifetime Power-On Resets +0x01 0x010 4 3034 --- Power-on Hours +0x01 0x018 6 9845905482 --- Logical Sectors Written +0x01 0x020 6 76859423 --- Number of Write Commands +0x01 0x028 6 12896391211 --- Logical Sectors Read +0x01 0x030 6 104164991 --- Number of Read Commands +0x01 0x038 6 10923976785 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 2177 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 3023 --- Spindle Motor Power-on Hours +0x03 0x010 4 2818 --- Head Flying Hours +0x03 0x018 4 6056 --- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 3516 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 180 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 39 N-- Average Short Term Temperature +0x05 0x018 1 36 N-- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 3 --- Lowest Temperature +0x05 0x030 1 44 N-- Highest Average Short Term Temperature +0x05 0x038 1 26 N-- Lowest Average Short Term Temperature +0x05 0x040 1 38 N-- Highest Average Long Term Temperature +0x05 0x048 1 30 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2453 --- Number of Hardware Resets +0x06 0x010 4 1716 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MQ04/MQ04ABF100/7C90E33F3D75 b/HDD/Toshiba/MQ04/MQ04ABF100/7C90E33F3D75 new file mode 100644 index 000000000..9472cd5bb --- /dev/null +++ b/HDD/Toshiba/MQ04/MQ04ABF100/7C90E33F3D75 @@ -0,0 +1,222 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA MQ04ABF100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: JU000J +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:18:29 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 1 (minimum power consumption with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 172) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 1266 + 4 Start_Stop_Count -O--CK 100 100 000 - 24525 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 3821 + 10 Spin_Retry_Count PO--CK 253 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2331 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 35 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 16 +193 Load_Cycle_Count -O--CK 096 096 000 - 42211 +194 Temperature_Celsius -O---K 100 100 000 - 27 (Min/Max 14/52) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 100 100 000 - 250 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 181 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 2 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 32768 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 24/34 Celsius +Lifetime Min/Max Temperature: 14/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 0/60 Celsius +Temperature History Size (Index): 478 (79) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2331 --- Lifetime Power-On Resets +0x01 0x010 4 3821 --- Power-on Hours +0x01 0x018 6 8072574703 --- Logical Sectors Written +0x01 0x020 6 25441443 --- Number of Write Commands +0x01 0x028 6 4386337356 --- Logical Sectors Read +0x01 0x030 6 15823527 --- Number of Read Commands +0x01 0x038 6 13757801761 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 35 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 367 --- Spindle Motor Power-on Hours +0x03 0x010 4 250 --- Head Flying Hours +0x03 0x018 4 42212 --- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 129 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 16 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 26 N-- Average Short Term Temperature +0x05 0x018 1 27 N-- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 34 N-- Highest Average Short Term Temperature +0x05 0x038 1 23 N-- Lowest Average Short Term Temperature +0x05 0x040 1 29 N-- Highest Average Long Term Temperature +0x05 0x048 1 26 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4254 --- Number of Hardware Resets +0x06 0x010 4 2447 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MQ04/MQ04ABF100/F7E0653D845B b/HDD/Toshiba/MQ04/MQ04ABF100/F7E0653D845B new file mode 100644 index 000000000..55ab5a0eb --- /dev/null +++ b/HDD/Toshiba/MQ04/MQ04ABF100/F7E0653D845B @@ -0,0 +1,223 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA MQ04ABF100 +Serial Number: -- +LU WWN Device Id: 5 000039 ... +Firmware Version: JU001C +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 4 17:35:09 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 172) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 32 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 239 + 3 Spin_Up_Time PO---K 100 100 002 - 1255 + 4 Start_Stop_Count -O--CK 100 100 000 - 5595 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate POSR-K 100 100 070 - 41910 + 9 Power_On_Hours -O--CK 100 100 000 - 1001 + 10 Spin_Retry_Count PO--CK 100 100 050 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5036 +183 Runtime_Bad_Block -O--CK 100 100 000 - 1 +184 End-to-End_Error PO-RCK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 High_Fly_Writes -O-RCK 100 100 000 - 0 +191 G-Sense_Error_Rate -O--CK 047 047 000 - 53 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 163208757286 +193 Load_Cycle_Count -O--CK 097 097 000 - 7218 +194 Temperature_Celsius -O---K 038 052 000 - 38 (Min/Max 23/38) +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 2 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 32768 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xb6 GPL VS 8191 Device vendor specific log +0xbb GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 702 - +# 2 Short offline Completed without error 00% 563 - +# 3 Short offline Completed without error 00% 499 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 23/38 Celsius +Lifetime Min/Max Temperature: 16/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 0/60 Celsius +Temperature History Size (Index): 478 (168) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5036 --- Lifetime Power-On Resets +0x01 0x010 4 1001 --- Power-on Hours +0x01 0x018 6 3446866939 --- Logical Sectors Written +0x01 0x020 6 51910159 --- Number of Write Commands +0x01 0x028 6 3378846444 --- Logical Sectors Read +0x01 0x030 6 53218969 --- Number of Read Commands +0x01 0x038 6 3604026573 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 53 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 997 --- Spindle Motor Power-on Hours +0x03 0x010 4 192 --- Head Flying Hours +0x03 0x018 4 7256 --- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 239 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 38 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 32 N-- Average Short Term Temperature +0x05 0x018 1 - N-- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 39 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 - N-- Highest Average Long Term Temperature +0x05 0x048 1 - N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6876 --- Number of Hardware Resets +0x06 0x010 4 5498 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MQ04/MQ04UBD200/4FA755F082A7 b/HDD/Toshiba/MQ04/MQ04UBD200/4FA755F082A7 new file mode 100644 index 000000000..b5e244fd6 --- /dev/null +++ b/HDD/Toshiba/MQ04/MQ04UBD200/4FA755F082A7 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MQ04UBD... +Device Model: TOSHIBA MQ04UBD200 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: JT000U +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 30 07:09:22 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 338) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 2349 + 4 Start_Stop_Count -O--CK 100 100 000 - 2505 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 046 046 000 - 21752 + 10 Spin_Retry_Count PO--CK 150 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 34 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 13 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 4 +193 Load_Cycle_Count -O--CK 100 100 000 - 2875 +194 Temperature_Celsius -O---K 100 100 000 - 24 (Min/Max 15/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 096 096 000 - 1900 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 187 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 2 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 32768 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 15/41 Celsius +Lifetime Min/Max Temperature: 15/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 0/60 Celsius +Temperature History Size (Index): 478 (76) + +SMART WRITE LOG does not return COUNT and LBA_LOW register +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 34 --- Lifetime Power-On Resets +0x01 0x010 4 21752 --- Power-on Hours +0x01 0x018 6 14378983265 --- Logical Sectors Written +0x01 0x020 6 204627297 --- Number of Write Commands +0x01 0x028 6 54471246038 --- Logical Sectors Read +0x01 0x030 6 4115756023 --- Number of Read Commands +0x01 0x038 6 78307287131 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 13 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1971 --- Spindle Motor Power-on Hours +0x03 0x010 4 1900 --- Head Flying Hours +0x03 0x018 4 2876 --- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 20 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 4 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 24 N-- Average Short Term Temperature +0x05 0x018 1 25 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 16 N-- Lowest Average Short Term Temperature +0x05 0x040 1 34 N-- Highest Average Long Term Temperature +0x05 0x048 1 17 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 54 --- Number of Hardware Resets +0x06 0x010 4 85 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/Toshiba/MQ04/MQ04UBF100/8DDDBD525F4A b/HDD/Toshiba/MQ04/MQ04UBF100/8DDDBD525F4A new file mode 100644 index 000000000..06ff3b53c --- /dev/null +++ b/HDD/Toshiba/MQ04/MQ04UBF100/8DDDBD525F4A @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba 2.5" HDD MQ04UBF... (USB 3.0) +Device Model: TOSHIBA MQ04UBF100 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: JU002U +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 30 07:09:17 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 172) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--K 100 100 001 - 2531 + 4 Start_Stop_Count -O--CK 100 100 000 - 1034 + 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 + 8 Seek_Time_Performance P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--CK 065 065 000 - 14211 + 10 Spin_Retry_Count PO--CK 120 100 030 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 57 +191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 +193 Load_Cycle_Count -O--CK 100 100 000 - 1367 +194 Temperature_Celsius -O---K 100 100 000 - 22 (Min/Max 14/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +220 Disk_Shift -O---- 100 100 000 - 0 +222 Loaded_Hours -O--CK 100 100 000 - 16 +223 Load_Retry_Count -O--CK 100 100 000 - 0 +224 Load_Friction -O---K 100 100 000 - 0 +226 Load-in_Time -OS--K 100 100 000 - 185 +240 Head_Flying_Hours P----- 100 100 001 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 2 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 32768 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa7 GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 22 Celsius +Power Cycle Min/Max Temperature: 15/28 Celsius +Lifetime Min/Max Temperature: 14/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 0/60 Celsius +Temperature History Size (Index): 478 (299) + +SMART WRITE LOG does not return COUNT and LBA_LOW register +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 57 --- Lifetime Power-On Resets +0x01 0x010 4 14211 --- Power-on Hours +0x01 0x018 6 190612118 --- Logical Sectors Written +0x01 0x020 6 3454715 --- Number of Write Commands +0x01 0x028 6 77161149 --- Logical Sectors Read +0x01 0x030 6 1224383 --- Number of Read Commands +0x01 0x038 6 51160176141 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (rev 1) == +0x02 0x010 4 0 --- Overlimit Shock Events +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 59 --- Spindle Motor Power-on Hours +0x03 0x010 4 16 --- Head Flying Hours +0x03 0x018 4 1368 --- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 1 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 12 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 15 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 22 --- Current Temperature +0x05 0x010 1 21 N-- Average Short Term Temperature +0x05 0x018 1 20 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 33 N-- Highest Average Short Term Temperature +0x05 0x038 1 14 N-- Lowest Average Short Term Temperature +0x05 0x040 1 28 N-- Highest Average Long Term Temperature +0x05 0x048 1 15 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 228 --- Number of Hardware Resets +0x06 0x010 4 265 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/HDD/WDC/WD10/WD10EACS-00D6B0/4534A40B4289 b/HDD/WDC/WD10/WD10EACS-00D6B0/4534A40B4289 new file mode 100644 index 000000000..1fb74c962 --- /dev/null +++ b/HDD/WDC/WD10/WD10EACS-00D6B0/4534A40B4289 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Green +Device Model: WDC WD10EACS-00D6B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Wed Aug 19 14:11:11 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (23400) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 268) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 163 156 021 - 6825 + 4 Start_Stop_Count -O--CK 094 094 000 - 6587 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 051 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 91693 + 10 Spin_Retry_Count -O--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 051 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1135 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 146 +193 Load_Cycle_Count -O--CK 198 198 000 - 6587 +194 Temperature_Celsius -O---K 111 100 000 - 39 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 65502 - +# 2 Short offline Interrupted (host reset) 90% 51152 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 27/45 Celsius +Lifetime Min/Max Temperature: 38/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (118) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x8000 4 461766 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EADS-00L5B1/83AB415DF1A7 b/HDD/WDC/WD10/WD10EADS-00L5B1/83AB415DF1A7 new file mode 100644 index 000000000..09dc45169 --- /dev/null +++ b/HDD/WDC/WD10/WD10EADS-00L5B1/83AB415DF1A7 @@ -0,0 +1,163 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Green +Device Model: WDC WD10EADS-00L5B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Thu Oct 29 17:22:44 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (24000) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 275) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 2 + 3 Spin_Up_Time POS--K 166 161 021 - 6658 + 4 Start_Stop_Count -O--CK 092 092 000 - 8153 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 95263 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 160 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 85 +193 Load_Cycle_Count -O--CK 198 198 000 - 8153 +194 Temperature_Celsius -O---K 115 098 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 30/37 Celsius +Lifetime Min/Max Temperature: 35/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (344) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x8000 4 5779252 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EADS-00L5B1/F66FE1F639DD b/HDD/WDC/WD10/WD10EADS-00L5B1/F66FE1F639DD new file mode 100644 index 000000000..a3c18aac6 --- /dev/null +++ b/HDD/WDC/WD10/WD10EADS-00L5B1/F66FE1F639DD @@ -0,0 +1,163 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Green +Device Model: WDC WD10EADS-00L5B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Thu Oct 29 17:22:43 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (23400) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 268) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 166 162 021 - 6675 + 4 Start_Stop_Count -O--CK 092 092 000 - 8145 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 95269 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 153 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 75 +193 Load_Cycle_Count -O--CK 198 198 000 - 8145 +194 Temperature_Celsius -O---K 116 100 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 30/37 Celsius +Lifetime Min/Max Temperature: 33/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (300) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x8000 4 5779208 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EALX-009BA0/DA7D523233C1 b/HDD/WDC/WD10/WD10EALX-009BA0/DA7D523233C1 new file mode 100644 index 000000000..49137defe --- /dev/null +++ b/HDD/WDC/WD10/WD10EALX-009BA0/DA7D523233C1 @@ -0,0 +1,181 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EALX-009BA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 15.01H15 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 1 10:54:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (16860) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 195) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 175 171 021 - 4233 + 4 Start_Stop_Count -O--CK 100 100 000 - 984 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 027 027 000 - 53805 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 962 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 391 +193 Load_Cycle_Count -O--CK 200 200 000 - 592 +194 Temperature_Celsius -O---K 107 096 000 - 40 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 52783 - +# 2 Short offline Completed without error 00% 52745 - +# 3 Extended offline Completed without error 00% 52725 - +# 4 Short offline Completed without error 00% 52722 - +# 5 Short offline Completed without error 00% 52698 - +# 6 Short offline Completed without error 00% 52674 - +# 7 Short offline Completed without error 00% 52644 - +# 8 Short offline Completed without error 00% 52620 - +# 9 Short offline Completed without error 00% 52585 - +#10 Short offline Completed without error 00% 52561 - +#11 Extended offline Completed without error 00% 52541 - +#12 Short offline Completed without error 00% 52537 - +#13 Short offline Completed without error 00% 52513 - +#14 Short offline Completed without error 00% 52489 - +#15 Short offline Completed without error 00% 52465 - +#16 Short offline Completed without error 00% 52442 - +#17 Short offline Completed without error 00% 52418 - +#18 Short offline Completed without error 00% 52394 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 27/40 Celsius +Lifetime Min/Max Temperature: 28/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (233) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 1507 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EARS-00MVWB0/ADFD2042323B b/HDD/WDC/WD10/WD10EARS-00MVWB0/ADFD2042323B new file mode 100644 index 000000000..38de0d0db --- /dev/null +++ b/HDD/WDC/WD10/WD10EARS-00MVWB0/ADFD2042323B @@ -0,0 +1,161 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Green (AF) +Device Model: WDC WD10EARS-00MVWB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 51.0AB51 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Oct 29 11:07:17 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (24960) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 243) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 172 163 021 - 6391 + 4 Start_Stop_Count -O--CK 100 100 000 - 86 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 006 006 000 - 68744 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 86 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 66 +193 Load_Cycle_Count -O--CK 001 001 000 - 2172141 +194 Temperature_Celsius -O---K 125 095 000 - 25 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 22/32 Celsius +Lifetime Min/Max Temperature: 22/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (312) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 5249205 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EARS-00Y5B1/A2A5DA25B817 b/HDD/WDC/WD10/WD10EARS-00Y5B1/A2A5DA25B817 new file mode 100644 index 000000000..855d7110b --- /dev/null +++ b/HDD/WDC/WD10/WD10EARS-00Y5B1/A2A5DA25B817 @@ -0,0 +1,162 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Green (AF) +Device Model: WDC WD10EARS-00Y5B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sat Jul 4 19:43:10 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (19380) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 223) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 133 128 021 - 6316 + 4 Start_Stop_Count -O--CK 098 098 000 - 2248 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 3926 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 847 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 334 +193 Load_Cycle_Count -O--CK 188 188 000 - 36561 +194 Temperature_Celsius -O---K 107 098 000 - 40 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3864 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 26/45 Celsius +Lifetime Min/Max Temperature: ?/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (81) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 31145 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68FYTN0/1210C72A1F9D b/HDD/WDC/WD10/WD10EFRX-68FYTN0/1210C72A1F9D new file mode 100644 index 000000000..5a3dfc60a --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68FYTN0/1210C72A1F9D @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68FYTN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:32:52 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13680) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 156) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 133 133 021 - 4341 + 4 Start_Stop_Count -O--CK 100 100 000 - 9 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 4335 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 9 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 3 +193 Load_Cycle_Count -O--CK 200 200 000 - 21 +194 Temperature_Celsius -O---K 108 102 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 26/41 Celsius +Lifetime Min/Max Temperature: 23/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (236) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 4335 --- Power-on Hours +0x01 0x018 6 5865144462 --- Logical Sectors Written +0x01 0x020 6 97771900 --- Number of Write Commands +0x01 0x028 6 10075399673 --- Logical Sectors Read +0x01 0x030 6 159881161 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4316 --- Spindle Motor Power-on Hours +0x03 0x010 4 4314 --- Head Flying Hours +0x03 0x018 4 25 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 91 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 31 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1187 --- Number of Hardware Resets +0x06 0x010 4 200 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 104 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 131 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 4585432 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68FYTN0/876504DB5539 b/HDD/WDC/WD10/WD10EFRX-68FYTN0/876504DB5539 new file mode 100644 index 000000000..b5125ef85 --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68FYTN0/876504DB5539 @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68FYTN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 10 15:00:52 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (15060) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 170) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 100 253 021 - 0 + 4 Start_Stop_Count -O--CK 100 100 000 - 4 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 6035 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 1 +193 Load_Cycle_Count -O--CK 200 200 000 - 44 +194 Temperature_Celsius -O---K 110 107 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 32/33 Celsius +Lifetime Min/Max Temperature: 0/36 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (8) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 4 --- Lifetime Power-On Resets +0x01 0x010 4 6035 --- Power-on Hours +0x01 0x018 6 19017990586 --- Logical Sectors Written +0x01 0x020 6 434392856 --- Number of Write Commands +0x01 0x028 6 5095039625 --- Logical Sectors Read +0x01 0x030 6 141109593 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6010 --- Spindle Motor Power-on Hours +0x03 0x010 4 5979 --- Head Flying Hours +0x03 0x018 4 46 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 4 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 84 --- Number of Hardware Resets +0x06 0x010 4 61 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 910 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68FYTN0/969E0C42E2B2 b/HDD/WDC/WD10/WD10EFRX-68FYTN0/969E0C42E2B2 new file mode 100644 index 000000000..6d62333ce --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68FYTN0/969E0C42E2B2 @@ -0,0 +1,369 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68FYTN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jul 16 11:00:34 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13200) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 150) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 13 + 3 Spin_Up_Time POS--K 138 136 021 - 4083 + 4 Start_Stop_Count -O--CK 100 100 000 - 893 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 085 085 000 - 11004 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 893 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 130 +193 Load_Cycle_Count -O--CK 200 200 000 - 906 +194 Temperature_Celsius -O---K 107 102 000 - 36 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1800 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1800 [23] occurred at disk power-on lifetime: 6458 hours (269 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 40 00 00 5d 08 9f 00 40 00 Error: UNC 64 sectors at LBA = 0x5d089f00 = 1560846080 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 40 00 00 5d 08 9f 00 40 00 03:01:21.730 READ DMA EXT + 25 00 00 00 40 00 00 5d 08 9e c0 40 00 03:01:21.730 READ DMA EXT + 25 00 00 00 40 00 00 5d 0a 2e 40 40 00 03:01:21.723 READ DMA EXT + 25 00 00 00 40 00 00 5d 09 61 80 40 00 03:01:21.723 READ DMA EXT + 25 00 00 00 40 00 00 5d 09 61 40 40 00 03:01:21.723 READ DMA EXT + +Error 1799 [22] occurred at disk power-on lifetime: 6127 hours (255 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 64 51 75 48 40 00 Error: UNC 1 sectors at LBA = 0x64517548 = 1683060040 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 64 51 75 48 40 00 04:28:19.333 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 47 40 00 04:28:19.332 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 46 40 00 04:28:19.332 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 45 40 00 04:28:19.332 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 44 40 00 04:28:19.332 READ DMA EXT + +Error 1798 [21] occurred at disk power-on lifetime: 6127 hours (255 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 64 51 75 48 40 00 Error: UNC 1 sectors at LBA = 0x64517548 = 1683060040 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 64 51 75 48 40 00 04:28:09.858 READ DMA EXT + ca 00 00 00 01 00 00 00 00 9f 20 e0 00 04:28:08.810 WRITE DMA + ca 00 00 00 40 00 00 05 0b 53 40 e5 00 04:28:08.279 WRITE DMA + ca 00 00 00 40 00 00 05 0b 52 c0 e5 00 04:28:08.279 WRITE DMA + ca 00 00 00 01 00 00 00 00 9f 1f e0 00 04:28:08.279 WRITE DMA + +Error 1797 [20] occurred at disk power-on lifetime: 6127 hours (255 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 64 51 75 48 40 00 Error: UNC 1 sectors at LBA = 0x64517548 = 1683060040 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 64 51 75 48 40 00 04:27:58.695 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 47 40 00 04:27:58.695 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 46 40 00 04:27:58.695 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 45 40 00 04:27:58.695 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 44 40 00 04:27:58.695 READ DMA EXT + +Error 1796 [19] occurred at disk power-on lifetime: 6127 hours (255 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 64 51 75 48 40 00 Error: UNC 1 sectors at LBA = 0x64517548 = 1683060040 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 64 51 75 48 40 00 04:27:49.882 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 47 40 00 04:27:49.882 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 46 40 00 04:27:49.882 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 45 40 00 04:27:49.882 READ DMA EXT + 25 00 00 00 01 00 00 64 51 75 44 40 00 04:27:49.882 READ DMA EXT + +Error 1795 [18] occurred at disk power-on lifetime: 6127 hours (255 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 62 8e 19 48 40 00 Error: UNC 1 sectors at LBA = 0x628e1948 = 1653479752 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 62 8e 19 48 40 00 04:26:28.235 READ DMA EXT + ca 00 00 00 01 00 00 00 00 9f 3c e0 00 04:26:27.276 WRITE DMA + ca 00 00 00 40 00 00 05 0b 53 40 e5 00 04:26:26.745 WRITE DMA + ca 00 00 00 40 00 00 05 0b 52 c0 e5 00 04:26:26.745 WRITE DMA + ca 00 00 00 01 00 00 00 00 9f 3b e0 00 04:26:26.745 WRITE DMA + +Error 1794 [17] occurred at disk power-on lifetime: 6127 hours (255 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 62 8e 19 48 40 00 Error: UNC 1 sectors at LBA = 0x628e1948 = 1653479752 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 62 8e 19 48 40 00 04:26:18.206 READ DMA EXT + 25 00 00 00 01 00 00 62 8e 19 47 40 00 04:26:18.206 READ DMA EXT + 25 00 00 00 01 00 00 62 8e 19 46 40 00 04:26:18.206 READ DMA EXT + 25 00 00 00 01 00 00 62 8e 19 45 40 00 04:26:18.206 READ DMA EXT + 25 00 00 00 01 00 00 62 8e 19 44 40 00 04:26:18.206 READ DMA EXT + +Error 1793 [16] occurred at disk power-on lifetime: 6127 hours (255 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 62 8e 19 48 40 00 Error: UNC 1 sectors at LBA = 0x628e1948 = 1653479752 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 62 8e 19 48 40 00 04:25:40.975 READ DMA EXT + 25 00 00 00 01 00 00 62 8e 19 47 40 00 04:25:40.974 READ DMA EXT + 25 00 00 00 01 00 00 62 8e 19 46 40 00 04:25:40.974 READ DMA EXT + 25 00 00 00 01 00 00 62 8e 19 45 40 00 04:25:40.974 READ DMA EXT + 25 00 00 00 01 00 00 62 8e 19 44 40 00 04:25:40.974 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed: read failure 90% 6075 144184968 +# 2 Short offline Completed without error 00% 6063 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 26/40 Celsius +Lifetime Min/Max Temperature: 0/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (47) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 893 --- Lifetime Power-On Resets +0x01 0x010 4 11004 --- Power-on Hours +0x01 0x018 6 74436548695 --- Logical Sectors Written +0x01 0x020 6 720683065 --- Number of Write Commands +0x01 0x028 6 46019238684 --- Logical Sectors Read +0x01 0x030 6 683941585 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 10963 --- Spindle Motor Power-on Hours +0x03 0x010 4 10912 --- Head Flying Hours +0x03 0x018 4 1037 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 1795 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 14 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 36 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2775 --- Number of Hardware Resets +0x06 0x010 4 1465 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 349891 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68FYTN0/A7C89314A0CD b/HDD/WDC/WD10/WD10EFRX-68FYTN0/A7C89314A0CD new file mode 100644 index 000000000..0f3d42f43 --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68FYTN0/A7C89314A0CD @@ -0,0 +1,218 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68FYTN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Jul 4 17:03:59 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13500) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 154) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 128 121 021 - 4600 + 4 Start_Stop_Count -O--CK 100 100 000 - 183 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 060 060 000 - 29582 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 183 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 120 +193 Load_Cycle_Count -O--CK 189 189 000 - 34637 +194 Temperature_Celsius -O---K 104 103 000 - 39 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 23725 - +# 2 Extended offline Completed without error 00% 20551 - +# 3 Short offline Completed without error 00% 11191 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 33/40 Celsius +Lifetime Min/Max Temperature: 14/40 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (225) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 183 --- Lifetime Power-On Resets +0x01 0x010 4 29582 --- Power-on Hours +0x01 0x018 6 2587537849 --- Logical Sectors Written +0x01 0x020 6 11716164 --- Number of Write Commands +0x01 0x028 6 22801420596 --- Logical Sectors Read +0x01 0x030 6 2013669703 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 29547 --- Spindle Motor Power-on Hours +0x03 0x010 4 8718 --- Head Flying Hours +0x03 0x018 4 34758 --- Head Load Events +0x03 0x020 4 200 N-- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1084 --- Number of Hardware Resets +0x06 0x010 4 524 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 27 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 28 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2444137 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68FYTN0/B76B9D6CC553 b/HDD/WDC/WD10/WD10EFRX-68FYTN0/B76B9D6CC553 new file mode 100644 index 000000000..0cd7032ab --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68FYTN0/B76B9D6CC553 @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68FYTN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 10 15:00:52 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13200) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 150) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 100 253 021 - 0 + 4 Start_Stop_Count -O--CK 100 100 000 - 5 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 6035 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 2 +193 Load_Cycle_Count -O--CK 200 200 000 - 16 +194 Temperature_Celsius -O---K 106 101 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 36/37 Celsius +Lifetime Min/Max Temperature: 0/42 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (32) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 6035 --- Power-on Hours +0x01 0x018 6 20708934138 --- Logical Sectors Written +0x01 0x020 6 444920383 --- Number of Write Commands +0x01 0x028 6 6482642778 --- Logical Sectors Read +0x01 0x030 6 147632565 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6011 --- Spindle Motor Power-on Hours +0x03 0x010 4 6001 --- Head Flying Hours +0x03 0x018 4 19 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 29 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 33 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 33 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 85 --- Number of Hardware Resets +0x06 0x010 4 61 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 910 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68PJCN0/02DAE526CA4B b/HDD/WDC/WD10/WD10EFRX-68PJCN0/02DAE526CA4B new file mode 100644 index 000000000..cdeafaac8 --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68PJCN0/02DAE526CA4B @@ -0,0 +1,193 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68PJCN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:58:13 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (14160) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 162) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 140 136 021 - 3975 + 4 Start_Stop_Count -O--CK 100 100 000 - 101 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 033 033 000 - 49086 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 101 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 95 +193 Load_Cycle_Count -O--CK 195 195 000 - 16373 +194 Temperature_Celsius -O---K 110 100 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 4 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4675 - +# 2 Short offline Completed without error 00% 4651 - +# 3 Short offline Completed without error 00% 4629 - +# 4 Short offline Completed without error 00% 4603 - +# 5 Extended offline Completed without error 00% 4582 - +# 6 Short offline Completed without error 00% 4556 - +# 7 Short offline Completed without error 00% 4532 - +# 8 Short offline Completed without error 00% 4508 - +# 9 Short offline Completed without error 00% 4484 - +#10 Short offline Completed without error 00% 4460 - +#11 Short offline Completed without error 00% 4436 - +#12 Short offline Completed without error 00% 4412 - +#13 Short offline Completed without error 00% 4388 - +#14 Short offline Completed without error 00% 4364 - +#15 Extended offline Completed without error 00% 4343 - +#16 Short offline Completed without error 00% 4318 - +#17 Short offline Completed without error 00% 4294 - +#18 Short offline Completed without error 00% 4270 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 29/42 Celsius +Lifetime Min/Max Temperature: 15/44 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (462) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 9672055 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68PJCN0/57926D3AE5A4 b/HDD/WDC/WD10/WD10EFRX-68PJCN0/57926D3AE5A4 new file mode 100644 index 000000000..2c7aef087 --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68PJCN0/57926D3AE5A4 @@ -0,0 +1,241 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68PJCN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:58:12 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13620) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 155) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 140 133 021 - 3958 + 4 Start_Stop_Count -O--CK 100 100 000 - 123 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 024 024 000 - 55973 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 123 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 117 +193 Load_Cycle_Count -O--CK 195 195 000 - 16418 +194 Temperature_Celsius -O---K 108 098 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 3 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 4922 hours (205 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 50 74 19 08 40 00 Error: IDNF at LBA = 0x50741908 = 1349785864 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 00 00 00 50 74 19 08 40 00 11d+01:56:01.057 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 50 74 18 08 40 00 11d+01:56:01.056 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 50 74 17 08 40 00 11d+01:56:01.055 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 50 74 16 08 40 00 11d+01:56:01.053 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 50 74 15 08 40 00 11d+01:56:01.052 WRITE FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 1568 hours (65 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 36 a8 b6 30 40 00 Error: IDNF at LBA = 0x36a8b630 = 917026352 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 e0 00 00 00 00 36 a8 b6 30 40 00 47d+12:36:07.443 WRITE FPDMA QUEUED + 61 00 30 00 00 00 00 36 a8 b5 e0 40 00 47d+12:36:07.443 WRITE FPDMA QUEUED + 61 00 e0 00 00 00 00 36 a8 b5 00 40 00 47d+12:36:07.442 WRITE FPDMA QUEUED + 61 00 58 00 00 00 00 36 a8 b4 88 40 00 47d+12:36:07.442 WRITE FPDMA QUEUED + 61 00 e0 00 00 00 00 36 a8 b3 a8 40 00 47d+12:36:07.441 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 28346 - +# 2 Extended offline Completed without error 00% 27602 - +# 3 Extended offline Completed without error 00% 26860 - +# 4 Extended offline Completed without error 00% 26142 - +# 5 Extended offline Completed without error 00% 25399 - +# 6 Extended offline Completed without error 00% 24679 - +# 7 Extended offline Completed without error 00% 23937 - +# 8 Extended offline Completed without error 00% 23273 - +# 9 Extended offline Completed without error 00% 22530 - +#10 Extended offline Completed without error 00% 21788 - +#11 Extended offline Completed without error 00% 21068 - +#12 Extended offline Completed without error 00% 20324 - +#13 Extended offline Completed without error 00% 19605 - +#14 Extended offline Completed without error 00% 18865 - +#15 Extended offline Completed without error 00% 18122 - +#16 Extended offline Completed without error 00% 17402 - +#17 Extended offline Completed without error 00% 16659 - +#18 Extended offline Completed without error 00% 15940 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 30/44 Celsius +Lifetime Min/Max Temperature: 2/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (344) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 9672039 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68PJCN0/69A7EB7788C3 b/HDD/WDC/WD10/WD10EFRX-68PJCN0/69A7EB7788C3 new file mode 100644 index 000000000..7bf6fc0b4 --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68PJCN0/69A7EB7788C3 @@ -0,0 +1,193 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68PJCN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:58:13 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13980) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 159) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 141 133 021 - 3908 + 4 Start_Stop_Count -O--CK 100 100 000 - 123 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 024 024 000 - 55970 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 123 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 119 +193 Load_Cycle_Count -O--CK 195 195 000 - 16215 +194 Temperature_Celsius -O---K 109 096 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 28346 - +# 2 Extended offline Completed without error 00% 27602 - +# 3 Extended offline Completed without error 00% 26860 - +# 4 Extended offline Completed without error 00% 26142 - +# 5 Extended offline Completed without error 00% 25399 - +# 6 Extended offline Completed without error 00% 24679 - +# 7 Extended offline Completed without error 00% 23937 - +# 8 Extended offline Completed without error 00% 23273 - +# 9 Extended offline Completed without error 00% 22530 - +#10 Extended offline Completed without error 00% 21788 - +#11 Extended offline Completed without error 00% 21068 - +#12 Extended offline Completed without error 00% 20324 - +#13 Extended offline Completed without error 00% 19605 - +#14 Extended offline Completed without error 00% 18865 - +#15 Extended offline Completed without error 00% 18122 - +#16 Extended offline Completed without error 00% 17402 - +#17 Extended offline Completed without error 00% 16659 - +#18 Extended offline Completed without error 00% 15940 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 31/43 Celsius +Lifetime Min/Max Temperature: 15/47 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (176) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 9672005 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68PJCN0/7B0E0107E9E9 b/HDD/WDC/WD10/WD10EFRX-68PJCN0/7B0E0107E9E9 new file mode 100644 index 000000000..2f6274a21 --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68PJCN0/7B0E0107E9E9 @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68PJCN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:58:13 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13920) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 158) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 143 137 021 - 3841 + 4 Start_Stop_Count -O--CK 100 100 000 - 68 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 058 058 000 - 30978 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 68 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 66 +193 Load_Cycle_Count -O--CK 191 191 000 - 29896 +194 Temperature_Celsius -O---K 112 088 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 5 hours (0 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 6b 27 92 a0 40 00 Error: IDNF at LBA = 0x6b2792a0 = 1797755552 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 30 00 00 00 00 6b 27 92 a0 40 00 05:23:19.037 WRITE FPDMA QUEUED + 61 00 b0 00 00 00 00 6b 27 91 10 40 00 05:23:19.036 WRITE FPDMA QUEUED + 61 00 30 00 00 00 00 6b 27 91 c0 40 00 05:23:19.035 WRITE FPDMA QUEUED + 61 00 28 00 00 00 00 6b 27 90 28 40 00 05:23:19.035 WRITE FPDMA QUEUED + 61 00 30 00 00 00 00 6b 27 90 e0 40 00 05:23:19.035 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 29/41 Celsius +Lifetime Min/Max Temperature: 15/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (316) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 9671918 Vendor specific + diff --git a/HDD/WDC/WD10/WD10EFRX-68PJCN0/A3D14760837C b/HDD/WDC/WD10/WD10EFRX-68PJCN0/A3D14760837C new file mode 100644 index 000000000..8e0205b3a --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68PJCN0/A3D14760837C @@ -0,0 +1,193 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68PJCN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:58:13 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13500) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 154) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 139 131 021 - 4008 + 4 Start_Stop_Count -O--CK 100 100 000 - 125 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 024 024 000 - 56011 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 125 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 119 +193 Load_Cycle_Count -O--CK 195 195 000 - 15852 +194 Temperature_Celsius -O---K 110 097 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 4 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 28385 - +# 2 Extended offline Completed without error 00% 27641 - +# 3 Extended offline Completed without error 00% 26899 - +# 4 Extended offline Completed without error 00% 26181 - +# 5 Extended offline Completed without error 00% 25438 - +# 6 Extended offline Completed without error 00% 24718 - +# 7 Extended offline Completed without error 00% 23976 - +# 8 Extended offline Completed without error 00% 23312 - +# 9 Extended offline Completed without error 00% 22569 - +#10 Extended offline Completed without error 00% 21827 - +#11 Extended offline Completed without error 00% 21107 - +#12 Extended offline Completed without error 00% 20363 - +#13 Extended offline Completed without error 00% 19644 - +#14 Extended offline Completed without error 00% 18904 - +#15 Extended offline Completed without error 00% 18161 - +#16 Extended offline Completed without error 00% 17441 - +#17 Extended offline Completed without error 00% 16698 - +#18 Extended offline Completed without error 00% 15979 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 30/42 Celsius +Lifetime Min/Max Temperature: 2/46 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (245) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 9672012 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68PJCN0/AAA4AAB54DBC b/HDD/WDC/WD10/WD10EFRX-68PJCN0/AAA4AAB54DBC new file mode 100644 index 000000000..2d386fbad --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68PJCN0/AAA4AAB54DBC @@ -0,0 +1,193 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68PJCN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:58:12 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (14160) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 162) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 140 133 021 - 3966 + 4 Start_Stop_Count -O--CK 100 100 000 - 123 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 024 024 000 - 55970 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 123 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 119 +193 Load_Cycle_Count -O--CK 195 195 000 - 15835 +194 Temperature_Celsius -O---K 109 096 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 199 000 - 2 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 28346 - +# 2 Extended offline Completed without error 00% 27603 - +# 3 Extended offline Completed without error 00% 26860 - +# 4 Extended offline Completed without error 00% 26142 - +# 5 Extended offline Completed without error 00% 25399 - +# 6 Extended offline Completed without error 00% 24679 - +# 7 Extended offline Completed without error 00% 23937 - +# 8 Extended offline Completed without error 00% 23273 - +# 9 Extended offline Completed without error 00% 22530 - +#10 Extended offline Completed without error 00% 21788 - +#11 Extended offline Completed without error 00% 21069 - +#12 Extended offline Completed without error 00% 20324 - +#13 Extended offline Completed without error 00% 19605 - +#14 Extended offline Completed without error 00% 18865 - +#15 Extended offline Completed without error 00% 18122 - +#16 Extended offline Completed without error 00% 17403 - +#17 Extended offline Completed without error 00% 16659 - +#18 Extended offline Completed without error 00% 15940 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 31/44 Celsius +Lifetime Min/Max Temperature: 15/47 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (152) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 9672049 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68PJCN0/CEB18DF4ADAB b/HDD/WDC/WD10/WD10EFRX-68PJCN0/CEB18DF4ADAB new file mode 100644 index 000000000..c46262c97 --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68PJCN0/CEB18DF4ADAB @@ -0,0 +1,241 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68PJCN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:58:13 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13200) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 150) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 2 + 3 Spin_Up_Time POS--K 137 129 021 - 4125 + 4 Start_Stop_Count -O--CK 100 100 000 - 130 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 026 026 000 - 54653 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 130 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 123 +193 Load_Cycle_Count -O--CK 196 196 000 - 14686 +194 Temperature_Celsius -O---K 110 098 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 5 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 42919 hours (1788 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 02 3d 7d 58 40 00 Error: UNC at LBA = 0x023d7d58 = 37584216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 58 00 18 00 00 02 3d 7e 98 40 00 30d+03:22:18.069 READ FPDMA QUEUED + 60 01 00 00 10 00 00 02 3d 7d 98 40 00 30d+03:22:18.062 READ FPDMA QUEUED + 60 00 58 00 08 00 00 02 3d 7d 40 40 00 30d+03:22:18.061 READ FPDMA QUEUED + 60 01 00 00 00 00 00 02 3d 7c 40 40 00 30d+03:22:18.061 READ FPDMA QUEUED + 60 00 08 00 48 00 00 02 3d 7c 38 40 00 30d+03:22:18.040 READ FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 41247 hours (1718 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 02 3d 98 c0 40 00 Error: UNC at LBA = 0x023d98c0 = 37591232 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 28 00 00 02 3d 9b 40 40 00 27d+20:05:18.483 READ FPDMA QUEUED + 60 00 30 00 20 00 00 02 3d 9c 20 40 00 27d+20:05:18.483 READ FPDMA QUEUED + 60 00 28 00 18 00 00 02 3d 9b f8 40 00 27d+20:05:18.483 READ FPDMA QUEUED + 60 00 28 00 10 00 00 02 3d 9b c8 40 00 27d+20:05:18.483 READ FPDMA QUEUED + 60 00 28 00 00 00 00 02 3d 9b 70 40 00 27d+20:05:18.483 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 28385 - +# 2 Extended offline Completed without error 00% 27642 - +# 3 Extended offline Completed without error 00% 26899 - +# 4 Extended offline Completed without error 00% 26181 - +# 5 Extended offline Completed without error 00% 25438 - +# 6 Extended offline Completed without error 00% 24719 - +# 7 Extended offline Completed without error 00% 23976 - +# 8 Extended offline Completed without error 00% 23313 - +# 9 Extended offline Completed without error 00% 22570 - +#10 Extended offline Completed without error 00% 21827 - +#11 Extended offline Completed without error 00% 21108 - +#12 Extended offline Completed without error 00% 20363 - +#13 Extended offline Completed without error 00% 19644 - +#14 Extended offline Completed without error 00% 18904 - +#15 Extended offline Completed without error 00% 18161 - +#16 Extended offline Completed without error 00% 17442 - +#17 Extended offline Completed without error 00% 16698 - +#18 Extended offline Completed without error 00% 15979 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 30/42 Celsius +Lifetime Min/Max Temperature: 15/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (101) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 9672147 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EFRX-68PJCN0/D2FBDCD5B712 b/HDD/WDC/WD10/WD10EFRX-68PJCN0/D2FBDCD5B712 new file mode 100644 index 000000000..be8d37de8 --- /dev/null +++ b/HDD/WDC/WD10/WD10EFRX-68PJCN0/D2FBDCD5B712 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10EFRX-68PJCN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:58:13 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13320) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 152) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 142 135 021 - 3891 + 4 Start_Stop_Count -O--CK 100 100 000 - 125 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 024 024 000 - 56018 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 125 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 118 +193 Load_Cycle_Count -O--CK 195 195 000 - 15661 +194 Temperature_Celsius -O---K 110 097 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 199 000 - 4 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 16864 hours (702 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 16 bb 75 b8 40 00 Error: UNC at LBA = 0x16bb75b8 = 381384120 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 f8 00 08 00 00 16 bb 76 d8 40 00 1d+19:29:47.461 READ FPDMA QUEUED + 60 01 00 00 00 00 00 16 bb 75 b8 40 00 1d+19:29:47.461 READ FPDMA QUEUED + 60 00 e0 00 00 00 00 16 bb 74 d8 40 00 1d+19:29:47.460 READ FPDMA QUEUED + 60 00 e0 00 00 00 00 16 bb 73 f8 40 00 1d+19:29:47.460 READ FPDMA QUEUED + 60 00 e0 00 08 00 00 16 bb 73 18 40 00 1d+19:29:47.460 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 28385 - +# 2 Extended offline Completed without error 00% 27642 - +# 3 Extended offline Completed without error 00% 26899 - +# 4 Extended offline Completed without error 00% 26181 - +# 5 Extended offline Completed without error 00% 25438 - +# 6 Extended offline Completed without error 00% 24718 - +# 7 Extended offline Completed without error 00% 23976 - +# 8 Extended offline Completed without error 00% 23312 - +# 9 Extended offline Completed without error 00% 22569 - +#10 Extended offline Completed without error 00% 21827 - +#11 Extended offline Completed without error 00% 21108 - +#12 Extended offline Completed without error 00% 20363 - +#13 Extended offline Completed without error 00% 19644 - +#14 Extended offline Completed without error 00% 18904 - +#15 Extended offline Completed without error 00% 18161 - +#16 Extended offline Completed without error 00% 17442 - +#17 Extended offline Completed without error 00% 16698 - +#18 Extended offline Completed without error 00% 15979 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 31/43 Celsius +Lifetime Min/Max Temperature: 15/46 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (184) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 9672118 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EURX-61C57Y0/BB05D9B2D3DC b/HDD/WDC/WD10/WD10EURX-61C57Y0/BB05D9B2D3DC new file mode 100644 index 000000000..69135ea02 --- /dev/null +++ b/HDD/WDC/WD10/WD10EURX-61C57Y0/BB05D9B2D3DC @@ -0,0 +1,193 @@ +smartctl 7.1 2019-12-30 r5022 [DragonFly 5.9-DEVELOPMENT x86_64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital AV-GP (AF) +Device Model: WDC WD10EURX-61C57Y0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 1 08:52:02 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13440) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 153) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 5 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 814 + 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 2 +193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2 +194 Temperature_Celsius 0x0022 107 100 000 Old_age Always - 36 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +ATA Error Count: 131 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 131 occurred at disk power-on lifetime: 27564 hours (1148 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 04 51 01 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + b0 d6 01 e0 4f c2 00 00 40d+11:15:45.590 SMART WRITE LOG + b0 d1 01 00 4f c2 00 00 40d+11:15:45.586 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 d8 00 00 4f c2 00 00 40d+11:15:45.556 SMART ENABLE OPERATIONS + e5 00 00 00 00 00 00 00 40d+11:15:45.556 CHECK POWER MODE + b0 d0 01 00 4f c2 00 00 40d+11:15:45.553 SMART READ DATA + +Error 130 occurred at disk power-on lifetime: 26886 hours (1120 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 04 51 01 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + b0 d6 01 e0 4f c2 00 00 12d+05:06:37.369 SMART WRITE LOG + b0 d1 01 00 4f c2 00 00 12d+05:06:37.365 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 d8 00 00 4f c2 00 00 12d+05:06:37.336 SMART ENABLE OPERATIONS + e5 00 00 00 00 00 00 00 12d+05:06:37.336 CHECK POWER MODE + b0 d0 01 00 4f c2 00 00 12d+05:06:37.331 SMART READ DATA + +Error 129 occurred at disk power-on lifetime: 26593 hours (1108 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 04 51 01 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + b0 d6 01 e0 4f c2 00 00 00:00:55.239 SMART WRITE LOG + b0 d1 01 00 4f c2 00 00 00:00:55.235 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 d8 00 00 4f c2 00 00 00:00:55.205 SMART ENABLE OPERATIONS + e5 00 00 00 00 00 00 00 00:00:55.205 CHECK POWER MODE + b0 d0 01 00 4f c2 00 00 00:00:55.202 SMART READ DATA + +Error 128 occurred at disk power-on lifetime: 24429 hours (1017 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 04 51 01 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + b0 d6 01 e0 4f c2 00 00 28d+05:56:26.637 SMART WRITE LOG + b0 d1 01 00 4f c2 00 00 28d+05:56:26.633 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 d8 00 00 4f c2 00 00 28d+05:56:26.603 SMART ENABLE OPERATIONS + e5 00 00 00 00 00 00 00 28d+05:56:26.603 CHECK POWER MODE + b0 d0 01 00 4f c2 00 00 28d+05:56:26.600 SMART READ DATA + +Error 127 occurred at disk power-on lifetime: 23751 hours (989 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 04 51 01 00 00 00 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + b0 d6 01 e0 4f c2 00 00 00:00:52.542 SMART WRITE LOG + b0 d1 01 00 4f c2 00 00 00:00:52.538 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 d8 00 00 4f c2 00 00 00:00:52.507 SMART ENABLE OPERATIONS + e5 00 00 00 00 00 00 00 00:00:52.507 CHECK POWER MODE + b0 d0 01 00 4f c2 00 00 00:00:52.504 SMART READ DATA + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD10/WD10EURX-83UY4Y0/E57C1181CADE b/HDD/WDC/WD10/WD10EURX-83UY4Y0/E57C1181CADE new file mode 100644 index 000000000..9f74560c8 --- /dev/null +++ b/HDD/WDC/WD10/WD10EURX-83UY4Y0/E57C1181CADE @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital AV-GP (AF) +Device Model: WDC WD10EURX-83UY4Y0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Aug 22 01:04:25 2020 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x03) Offline data collection activity + is in progress. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12840) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 147) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 129 127 021 - 4541 + 4 Start_Stop_Count -O--CK 100 100 000 - 341 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 096 096 000 - 2920 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 232 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 81 +193 Load_Cycle_Count -O--CK 200 200 000 - 260 +194 Temperature_Celsius -O---K 114 094 000 - 29 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Selective offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x8): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 24/29 Celsius +Lifetime Min/Max Temperature: 0/49 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (163) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 232 --- Lifetime Power-On Resets +0x01 0x010 4 2920 --- Power-on Hours +0x01 0x018 6 10429239137 --- Logical Sectors Written +0x01 0x020 6 142331928 --- Number of Write Commands +0x01 0x028 6 1011655589 --- Logical Sectors Read +0x01 0x030 6 3962311 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2876 --- Spindle Motor Power-on Hours +0x03 0x010 4 2874 --- Head Flying Hours +0x03 0x018 4 342 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 46 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 44 --- Highest Average Long Term Temperature +0x05 0x048 1 39 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2012 --- Number of Hardware Resets +0x06 0x010 4 306 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 30394 Vendor specific + diff --git a/HDD/WDC/WD10/WD10EZEX-00BN5A0/9D4F7E3C3EA2 b/HDD/WDC/WD10/WD10EZEX-00BN5A0/9D4F7E3C3EA2 new file mode 100644 index 000000000..dd7b30f19 --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-00BN5A0/9D4F7E3C3EA2 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-00BN5A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 16 03:47:02 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11580) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 120) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 175 174 021 - 2216 + 4 Start_Stop_Count -O--CK 098 098 000 - 2867 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 085 085 000 - 11604 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2867 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 52 +193 Load_Cycle_Count -O--CK 200 200 000 - 2815 +194 Temperature_Celsius -O---K 113 100 000 - 30 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 23/30 Celsius +Lifetime Min/Max Temperature: 0/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (327) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1479 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EZEX-00WN4A0/E6269FD4ACE8 b/HDD/WDC/WD10/WD10EZEX-00WN4A0/E6269FD4ACE8 new file mode 100644 index 000000000..a8cff8b6d --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-00WN4A0/E6269FD4ACE8 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-00WN4A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 19:50:29 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11760) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 122) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 188 169 021 - 1591 + 4 Start_Stop_Count -O--CK 098 098 000 - 2380 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 090 090 000 - 7880 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2292 +192 Power-Off_Retract_Count -O--CK 199 199 000 - 1050 +193 Load_Cycle_Count -O--CK 199 199 000 - 4279 +194 Temperature_Celsius -O---K 100 094 000 - 43 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 10% 7576 - +# 2 Short offline Completed without error 00% 257 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 27/43 Celsius +Lifetime Min/Max Temperature: 19/49 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (30) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 44117 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EZEX-08WN4A0/849AA485DE70 b/HDD/WDC/WD10/WD10EZEX-08WN4A0/849AA485DE70 new file mode 100644 index 000000000..b950bf31e --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-08WN4A0/849AA485DE70 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-08WN4A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 02.01A02 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Jul 4 17:03:59 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10800) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 113) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 180 167 021 - 1983 + 4 Start_Stop_Count -O--CK 100 100 000 - 75 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 087 087 000 - 9940 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 75 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 44 +193 Load_Cycle_Count -O--CK 199 199 000 - 3693 +194 Temperature_Celsius -O---K 099 098 000 - 44 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6037 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 37/45 Celsius +Lifetime Min/Max Temperature: 15/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (431) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 26 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 27 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2443784 Vendor specific + diff --git a/HDD/WDC/WD10/WD10EZEX-08WN4A0/BDEC47E52680 b/HDD/WDC/WD10/WD10EZEX-08WN4A0/BDEC47E52680 new file mode 100644 index 000000000..b294865c3 --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-08WN4A0/BDEC47E52680 @@ -0,0 +1,327 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-08WN4A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 14 17:19:20 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12180) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 126) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 199 051 - 0 + 3 Spin_Up_Time POS--K 177 171 021 - 2108 + 4 Start_Stop_Count -O--CK 100 100 000 - 54 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 056 056 000 - 32638 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 54 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 44 +193 Load_Cycle_Count -O--CK 200 200 000 - 37 +194 Temperature_Celsius -O---K 103 094 000 - 40 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 2 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 77 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 77 [4] occurred at disk power-on lifetime: 29990 hours (1249 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 13 23 48 40 00 Error: UNC at LBA = 0x00132348 = 1254216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 38 00 00 00 0a bf 68 40 08 19d+10:58:37.329 READ FPDMA QUEUED + 60 00 08 00 30 00 00 00 13 23 48 40 08 19d+10:58:37.329 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 19d+10:58:37.329 READ LOG EXT + 60 00 08 00 20 00 00 00 0a bf 68 40 08 19d+10:58:33.591 READ FPDMA QUEUED + 60 00 08 00 18 00 00 00 13 23 48 40 08 19d+10:58:33.591 READ FPDMA QUEUED + +Error 76 [3] occurred at disk power-on lifetime: 29990 hours (1249 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 13 23 48 40 00 Error: UNC at LBA = 0x00132348 = 1254216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 20 00 00 00 0a bf 68 40 08 19d+10:58:33.591 READ FPDMA QUEUED + 60 00 08 00 18 00 00 00 13 23 48 40 08 19d+10:58:33.591 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 19d+10:58:33.591 READ LOG EXT + 61 00 10 00 08 00 00 21 d8 c4 f0 40 08 19d+10:58:29.770 WRITE FPDMA QUEUED + 61 00 40 00 00 00 00 21 d8 bd b0 40 08 19d+10:58:29.770 WRITE FPDMA QUEUED + +Error 75 [2] occurred at disk power-on lifetime: 29990 hours (1249 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 13 23 48 40 00 Error: WP at LBA = 0x00132348 = 1254216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 10 00 08 00 00 21 d8 c4 f0 40 08 19d+10:58:29.770 WRITE FPDMA QUEUED + 61 00 40 00 00 00 00 21 d8 bd b0 40 08 19d+10:58:29.770 WRITE FPDMA QUEUED + 60 00 08 00 f8 00 00 00 0a bf 68 40 08 19d+10:58:29.770 READ FPDMA QUEUED + 60 00 08 00 f0 00 00 00 13 23 48 40 08 19d+10:58:29.770 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 19d+10:58:29.770 READ LOG EXT + +Error 74 [1] occurred at disk power-on lifetime: 29990 hours (1249 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 13 23 48 40 00 Error: WP at LBA = 0x00132348 = 1254216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 10 00 e0 00 00 21 d8 c4 f0 40 08 19d+10:58:26.041 WRITE FPDMA QUEUED + 61 00 40 00 d8 00 00 21 d8 bd b0 40 08 19d+10:58:26.041 WRITE FPDMA QUEUED + 60 00 08 00 d0 00 00 00 0a bf 68 40 08 19d+10:58:26.040 READ FPDMA QUEUED + 61 00 10 00 c8 00 00 21 d8 b8 f8 40 08 19d+10:58:26.040 WRITE FPDMA QUEUED + 61 00 90 00 c0 00 00 70 5c c0 78 40 08 19d+10:58:26.040 WRITE FPDMA QUEUED + +Error 73 [0] occurred at disk power-on lifetime: 29990 hours (1249 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 13 23 48 40 00 Error: UNC at LBA = 0x00132348 = 1254216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 a8 00 00 00 0a bf 68 40 08 19d+10:58:25.007 READ FPDMA QUEUED + 61 00 10 00 a0 00 00 21 d8 b8 f8 40 08 19d+10:58:24.467 WRITE FPDMA QUEUED + 61 00 90 00 98 00 00 70 5c c0 78 40 08 19d+10:58:22.293 WRITE FPDMA QUEUED + 60 00 08 00 90 00 00 00 13 23 48 40 08 19d+10:58:22.292 READ FPDMA QUEUED + 61 00 90 00 88 00 00 70 5c be 68 40 08 19d+10:58:22.271 WRITE FPDMA QUEUED + +Error 72 [23] occurred at disk power-on lifetime: 29990 hours (1249 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 13 23 48 40 00 Error: UNC at LBA = 0x00132348 = 1254216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 18 00 c8 00 00 00 0a c6 58 40 08 19d+10:58:13.095 READ FPDMA QUEUED + 60 00 08 00 c0 00 00 00 1f b5 f0 40 08 19d+10:58:13.095 READ FPDMA QUEUED + 60 00 08 00 b8 00 00 00 20 95 20 40 08 19d+10:58:13.095 READ FPDMA QUEUED + 60 00 08 00 b0 00 00 53 ac 4a 28 40 08 19d+10:58:13.095 READ FPDMA QUEUED + 60 00 08 00 a8 00 00 00 13 23 48 40 08 19d+10:58:13.095 READ FPDMA QUEUED + +Error 71 [22] occurred at disk power-on lifetime: 29990 hours (1249 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 13 23 48 40 00 Error: UNC at LBA = 0x00132348 = 1254216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 18 00 98 00 00 00 0a c6 58 40 08 19d+10:58:09.357 READ FPDMA QUEUED + 60 00 08 00 90 00 00 00 1f b5 f0 40 08 19d+10:58:09.357 READ FPDMA QUEUED + 60 00 08 00 88 00 00 00 20 95 20 40 08 19d+10:58:09.357 READ FPDMA QUEUED + 60 00 08 00 80 00 00 53 ac 4a 28 40 08 19d+10:58:09.357 READ FPDMA QUEUED + 60 00 08 00 78 00 00 00 13 23 48 40 08 19d+10:58:09.357 READ FPDMA QUEUED + +Error 70 [21] occurred at disk power-on lifetime: 29990 hours (1249 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 13 23 48 40 00 Error: UNC at LBA = 0x00132348 = 1254216 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 18 00 68 00 00 00 0a c6 58 40 08 19d+10:58:05.611 READ FPDMA QUEUED + 60 00 08 00 60 00 00 00 1f b5 f0 40 08 19d+10:58:05.611 READ FPDMA QUEUED + 60 00 08 00 58 00 00 00 20 95 20 40 08 19d+10:58:05.611 READ FPDMA QUEUED + 60 00 08 00 50 00 00 53 ac 4a 28 40 08 19d+10:58:05.611 READ FPDMA QUEUED + 60 00 38 00 48 00 00 00 00 79 10 40 08 19d+10:58:05.611 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed: read failure 90% 2157 1267424 +# 2 Short offline Completed: read failure 90% 2157 1267424 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 32/45 Celsius +Lifetime Min/Max Temperature: 20/49 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (442) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 11213991 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EZEX-08WN4A0/D4E1A00143C6 b/HDD/WDC/WD10/WD10EZEX-08WN4A0/D4E1A00143C6 new file mode 100644 index 000000000..4e46ff387 --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-08WN4A0/D4E1A00143C6 @@ -0,0 +1,173 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-08WN4A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 14 17:19:20 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11700) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 121) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 184 173 021 - 1758 + 4 Start_Stop_Count -O--CK 100 100 000 - 48 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 059 059 000 - 30167 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 48 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 40 +193 Load_Cycle_Count -O--CK 200 200 000 - 20 +194 Temperature_Celsius -O---K 106 098 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 29/43 Celsius +Lifetime Min/Max Temperature: 18/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (466) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 11213286 Vendor specific + diff --git a/HDD/WDC/WD10/WD10EZEX-08WN4A0/D5066787AD5D b/HDD/WDC/WD10/WD10EZEX-08WN4A0/D5066787AD5D new file mode 100644 index 000000000..967e3b6e0 --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-08WN4A0/D5066787AD5D @@ -0,0 +1,175 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-08WN4A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 14 17:19:20 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12540) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 130) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 173 171 021 - 2333 + 4 Start_Stop_Count -O--CK 100 100 000 - 54 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 056 056 000 - 32638 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 54 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 44 +193 Load_Cycle_Count -O--CK 200 200 000 - 32 +194 Temperature_Celsius -O---K 105 097 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 30/43 Celsius +Lifetime Min/Max Temperature: 19/46 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (451) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 11213993 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EZEX-08WN4A0/DEEAF7BCBD96 b/HDD/WDC/WD10/WD10EZEX-08WN4A0/DEEAF7BCBD96 new file mode 100644 index 000000000..a0e9a17a0 --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-08WN4A0/DEEAF7BCBD96 @@ -0,0 +1,180 @@ +smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-RELEASE amd64] (local build) +Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-08WN4A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 02.01A02 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Jul 15 14:06:21 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10920) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 114) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 183 171 021 - 1816 + 4 Start_Stop_Count -O--CK 100 100 000 - 183 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 076 076 000 - 17762 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 183 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 175 +193 Load_Cycle_Count -O--CK 200 200 000 - 1966 +194 Temperature_Celsius -O---K 095 087 000 - 48 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers +Read GP Log Directory failed + +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x09 SL R/W 1 Selective self-test log +0x30 SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f SL R/W 16 Host vendor specific log +0xa0-0xa7 SL VS 16 Device vendor specific log +0xa8-0xb6 SL VS 1 Device vendor specific log +0xb7 SL VS 48 Device vendor specific log +0xbd SL VS 1 Device vendor specific log +0xc0 SL VS 1 Device vendor specific log +0xdf SL VS 1 Device vendor specific log +0xe0 SL R/W 1 SCT Command/Status +0xe1 SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 17746 - +# 2 Short offline Completed without error 00% 17722 - +# 3 Short offline Completed without error 00% 17698 - +# 4 Extended offline Completed without error 00% 17677 - +# 5 Short offline Completed without error 00% 17674 - +# 6 Short offline Completed without error 00% 17650 - +# 7 Short offline Completed without error 00% 17626 - +# 8 Short offline Completed without error 00% 17602 - +# 9 Short offline Completed without error 00% 17578 - +#10 Short offline Completed without error 00% 17554 - +#11 Short offline Completed without error 00% 17530 - +#12 Extended offline Completed without error 00% 17509 - +#13 Short offline Completed without error 00% 17506 - +#14 Short offline Completed without error 00% 17482 - +#15 Short offline Completed without error 00% 17458 - +#16 Short offline Completed without error 00% 17434 - +#17 Short offline Completed without error 00% 17410 - +#18 Short offline Completed without error 00% 17386 - +#19 Short offline Completed without error 00% 17362 - +#20 Extended offline Completed without error 00% 17341 - +#21 Short offline Completed without error 00% 17338 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +SCT Support Level: 1 +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 39/56 Celsius +Lifetime Min/Max Temperature: 22/56 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (370) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers +Read SATA Phy Event Counters failed + + + diff --git a/HDD/WDC/WD10/WD10EZEX-08WN4A0/FB01E29BCF59 b/HDD/WDC/WD10/WD10EZEX-08WN4A0/FB01E29BCF59 new file mode 100644 index 000000000..95d5eadec --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-08WN4A0/FB01E29BCF59 @@ -0,0 +1,180 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-08WN4A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 02.01A02 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 16:21:28 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11100) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 115) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 172 171 021 - 2375 + 4 Start_Stop_Count -O--CK 100 100 000 - 95 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 077 077 000 - 17442 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 95 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 47 +193 Load_Cycle_Count -O--CK 200 200 000 - 109 +194 Temperature_Celsius -O---K 112 103 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 5 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 90% 16238 - +# 2 Short offline Interrupted (host reset) 90% 16238 - +# 3 Extended offline Completed without error 00% 14850 - +# 4 Short offline Completed without error 00% 14848 - +# 5 Extended offline Completed without error 00% 14138 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 27/36 Celsius +Lifetime Min/Max Temperature: 21/40 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (371) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 3464395 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EZEX-22MFCA0/271428D922ED b/HDD/WDC/WD10/WD10EZEX-22MFCA0/271428D922ED new file mode 100644 index 000000000..970f041d8 --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-22MFCA0/271428D922ED @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-22MFCA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 6 13:51:23 2020 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10800) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 113) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 173 173 021 - 2316 + 4 Start_Stop_Count -O--CK 100 100 000 - 9 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 087 087 000 - 9754 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 9 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 0 +193 Load_Cycle_Count -O--CK 199 199 000 - 5299 +194 Temperature_Celsius -O---K 106 102 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 32/41 Celsius +Lifetime Min/Max Temperature: 25/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (129) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 141 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 150 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5977322 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EZEX-22MFCA0/7077BE2DB9CF b/HDD/WDC/WD10/WD10EZEX-22MFCA0/7077BE2DB9CF new file mode 100644 index 000000000..6e2975f22 --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-22MFCA0/7077BE2DB9CF @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-22MFCA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 16:21:29 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11760) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 122) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 173 171 021 - 2341 + 4 Start_Stop_Count -O--CK 100 100 000 - 197 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 053 053 000 - 34406 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 197 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 77 +193 Load_Cycle_Count -O--CK 200 200 000 - 2148 +194 Temperature_Celsius -O---K 109 100 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 29/38 Celsius +Lifetime Min/Max Temperature: 21/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (328) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 3464304 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EZEX-22MFCA0/B4E55F09934C b/HDD/WDC/WD10/WD10EZEX-22MFCA0/B4E55F09934C new file mode 100644 index 000000000..5c2a66ea0 --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-22MFCA0/B4E55F09934C @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-22MFCA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 4 17:03:59 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10800) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 113) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 100 253 021 - 0 + 4 Start_Stop_Count -O--CK 100 100 000 - 3 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 781 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 1 +193 Load_Cycle_Count -O--CK 200 200 000 - 68 +194 Temperature_Celsius -O---K 099 099 000 - 44 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 38/45 Celsius +Lifetime Min/Max Temperature: 25/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (66) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 26 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 27 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2442932 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EZEX-60M2NA0/6D31FF503289 b/HDD/WDC/WD10/WD10EZEX-60M2NA0/6D31FF503289 new file mode 100644 index 000000000..3647d95fc --- /dev/null +++ b/HDD/WDC/WD10/WD10EZEX-60M2NA0/6D31FF503289 @@ -0,0 +1,330 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZEX-60M2NA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 07:45:54 2020 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11400) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 118) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 21 + 3 Spin_Up_Time POS--K 176 170 021 - 2191 + 4 Start_Stop_Count -O--CK 100 100 000 - 545 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate POSR-K 200 200 051 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 2413 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 545 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 089 000 - 21 +188 Command_Timeout -O--CK 100 099 000 - 4 +190 Airflow_Temperature_Cel -O---K 067 053 040 - 33 (Min/Max 32/37) +192 Power-Off_Retract_Count -O--CK 200 200 000 - 5 +193 Load_Cycle_Count -O--CK 200 200 000 - 539 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0d GPL,SL R/O 8 LPS Mis-alignment log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 302 Device vendor specific log +0xb6 SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 21 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 21 [20] occurred at disk power-on lifetime: 603 hours (25 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 03 96 af 99 e0 00 Error: UNC 256 sectors at LBA = 0x0396af99 = 60207001 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 00 03 96 af 99 e0 00 01:56:36.458 READ DMA EXT + 35 00 00 00 08 00 00 00 66 0f 20 e0 00 01:56:33.207 WRITE DMA EXT + ea 00 00 00 00 66 0f b8 00 00 00 e0 00 01:56:33.142 FLUSH CACHE EXT + 35 00 00 00 08 00 00 00 66 0f b0 e0 00 01:56:33.142 WRITE DMA EXT + 35 00 00 00 08 00 00 00 8a 50 a0 e0 00 01:56:33.035 WRITE DMA EXT + +Error 20 [19] occurred at disk power-on lifetime: 603 hours (25 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 03 96 af 99 e0 00 Error: UNC 1 sectors at LBA = 0x0396af99 = 60207001 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 03 96 af 99 e0 00 01:56:28.473 READ DMA EXT + 35 00 00 00 60 00 00 3a 38 31 00 e0 00 01:56:28.459 WRITE DMA EXT + 25 00 00 00 60 00 00 00 67 70 00 e0 00 01:56:28.458 READ DMA EXT + 25 00 00 00 01 00 00 03 96 af 98 e0 00 01:56:24.009 READ DMA EXT + 35 00 00 00 08 00 00 00 0b 68 18 e0 00 01:56:22.538 WRITE DMA EXT + +Error 19 [18] occurred at disk power-on lifetime: 603 hours (25 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 03 96 af 98 e0 00 Error: UNC 1 sectors at LBA = 0x0396af98 = 60207000 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 03 96 af 98 e0 00 01:56:24.009 READ DMA EXT + 35 00 00 00 08 00 00 00 0b 68 18 e0 00 01:56:22.538 WRITE DMA EXT + 35 00 00 00 20 00 00 3a 38 30 e0 e0 00 01:56:22.538 WRITE DMA EXT + 25 00 00 00 20 00 00 00 0b 68 00 e0 00 01:56:22.532 READ DMA EXT + 35 00 00 00 08 00 00 04 cf 91 b8 e0 00 01:56:22.531 WRITE DMA EXT + +Error 18 [17] occurred at disk power-on lifetime: 602 hours (25 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 03 96 af 98 e0 00 Error: UNC 1 sectors at LBA = 0x0396af98 = 60207000 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 03 96 af 98 e0 00 01:49:57.114 READ DMA EXT + 25 00 00 00 01 00 00 03 96 af 97 e0 00 01:49:57.114 READ DMA EXT + 25 00 00 00 01 00 00 03 96 af 96 e0 00 01:49:57.113 READ DMA EXT + 25 00 00 00 01 00 00 03 96 af 95 e0 00 01:49:57.113 READ DMA EXT + 25 00 00 00 01 00 00 03 96 af 94 e0 00 01:49:57.113 READ DMA EXT + +Error 17 [16] occurred at disk power-on lifetime: 602 hours (25 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 03 96 af 18 e0 00 Error: UNC 256 sectors at LBA = 0x0396af18 = 60206872 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 01 00 00 00 03 96 af 18 e0 00 01:49:52.452 READ DMA EXT + 25 00 00 01 00 00 00 03 96 ae 18 e0 00 01:49:52.451 READ DMA EXT + 25 00 00 00 08 00 00 03 96 ae 10 e0 00 01:49:52.450 READ DMA EXT + 25 00 00 01 00 00 00 03 96 ad 10 e0 00 01:49:52.449 READ DMA EXT + 25 00 00 01 00 00 00 03 96 ac 10 e0 00 01:49:52.449 READ DMA EXT + +Error 16 [15] occurred at disk power-on lifetime: 602 hours (25 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 03 96 af 98 e0 00 Error: UNC 1 sectors at LBA = 0x0396af98 = 60207000 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 03 96 af 98 e0 00 01:05:49.697 READ DMA EXT + 35 00 00 00 08 00 00 00 66 0f 28 e0 00 01:05:49.422 WRITE DMA EXT + ea 00 00 00 00 66 0f b8 00 00 00 e0 00 01:05:49.388 FLUSH CACHE EXT + 35 00 00 00 08 00 00 00 66 0f b0 e0 00 01:05:49.388 WRITE DMA EXT + 35 00 00 00 60 00 00 00 66 b3 f8 e0 00 01:05:49.343 WRITE DMA EXT + +Error 15 [14] occurred at disk power-on lifetime: 602 hours (25 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 03 96 af 98 e0 00 Error: UNC 1 sectors at LBA = 0x0396af98 = 60207000 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 03 96 af 98 e0 00 01:05:39.679 READ DMA EXT + 25 00 00 00 28 00 00 06 8d 85 0a e0 00 01:05:39.665 READ DMA EXT + 35 00 00 00 08 00 00 00 66 0f 20 e0 00 01:05:36.831 WRITE DMA EXT + ea 00 00 00 00 66 0f b8 00 00 00 e0 00 01:05:36.804 FLUSH CACHE EXT + 35 00 00 00 08 00 00 00 66 0f b0 e0 00 01:05:36.804 WRITE DMA EXT + +Error 14 [13] occurred at disk power-on lifetime: 602 hours (25 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 03 96 af 98 e0 00 Error: UNC 1 sectors at LBA = 0x0396af98 = 60207000 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 03 96 af 98 e0 00 01:05:16.651 READ DMA EXT + 25 00 00 00 40 00 00 06 a7 56 22 e0 00 01:05:16.629 READ DMA EXT + 25 00 00 00 40 00 00 3a 62 f4 a2 e0 00 01:05:16.627 READ DMA EXT + 25 00 00 00 40 00 00 3a 63 22 ba e0 00 01:05:16.619 READ DMA EXT + 25 00 00 00 40 00 00 3a 63 23 8a e0 00 01:05:16.608 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 32/37 Celsius +Lifetime Min/Max Temperature: 12/47 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (19) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 39 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 40 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2231787 Vendor specific + diff --git a/HDD/WDC/WD10/WD10EZRX-00L4HB0/198128F1B099 b/HDD/WDC/WD10/WD10EZRX-00L4HB0/198128F1B099 new file mode 100644 index 000000000..8a963ca93 --- /dev/null +++ b/HDD/WDC/WD10/WD10EZRX-00L4HB0/198128F1B099 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Green +Device Model: WDC WD10EZRX-00L4HB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 21:10:02 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (14880) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 168) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 138 121 021 - 4075 + 4 Start_Stop_Count -O--CK 094 094 000 - 6557 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 067 067 000 - 24703 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 094 094 000 - 6554 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 78 +193 Load_Cycle_Count -O--CK 130 130 000 - 212219 +194 Temperature_Celsius -O---K 114 106 000 - 29 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 15274 - +# 2 Short offline Completed without error 00% 13319 - +# 3 Short offline Completed without error 00% 3808 - +# 4 Short offline Completed without error 00% 2606 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 29/30 Celsius +Lifetime Min/Max Temperature: 0/37 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (294) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 859 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10EZRZ-00HTKB0/AE655B8D14E0 b/HDD/WDC/WD10/WD10EZRZ-00HTKB0/AE655B8D14E0 new file mode 100644 index 000000000..166688a32 --- /dev/null +++ b/HDD/WDC/WD10/WD10EZRZ-00HTKB0/AE655B8D14E0 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10EZRZ-00HTKB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 21:10:02 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13620) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 155) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 133 127 021 - 4333 + 4 Start_Stop_Count -O--CK 099 099 000 - 1899 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 086 086 000 - 10714 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1898 +192 Power-Off_Retract_Count -O--CK 199 199 000 - 927 +193 Load_Cycle_Count -O--CK 133 133 000 - 201316 +194 Temperature_Celsius -O---K 111 103 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 32/33 Celsius +Lifetime Min/Max Temperature: 0/40 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (454) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 859 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10JFCX-68N6GN0/965A2B89F677 b/HDD/WDC/WD10/WD10JFCX-68N6GN0/965A2B89F677 new file mode 100644 index 000000000..d2ef89a5d --- /dev/null +++ b/HDD/WDC/WD10/WD10JFCX-68N6GN0/965A2B89F677 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD10JFCX-68N6GN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:18:29 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (18900) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 211) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 180 176 021 - 1983 + 4 Start_Stop_Count -O--CK 100 100 000 - 42 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 065 065 000 - 25845 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 42 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 29 +193 Load_Cycle_Count -O--CK 200 200 000 - 2647 +194 Temperature_Celsius -O---K 119 102 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 38 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 24/32 Celsius +Lifetime Min/Max Temperature: 13/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (154) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 676301 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10JMVW-11AJGS4/EBD4E4E5E5EF b/HDD/WDC/WD10/WD10JMVW-11AJGS4/EBD4E4E5E5EF new file mode 100644 index 000000000..4d034621c --- /dev/null +++ b/HDD/WDC/WD10/WD10JMVW-11AJGS4/EBD4E4E5E5EF @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Elements / My Passport (USB, AF) +Device Model: WDC WD10JMVW-11AJGS4 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,171,332,096 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Aug 1 21:14:51 2020 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (18120) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 203) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 118 112 021 - 5075 + 4 Start_Stop_Count -O--CK 100 100 000 - 737 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 392 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 237 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 90 +193 Load_Cycle_Count -O--CK 199 199 000 - 3183 +194 Temperature_Celsius -O---K 109 098 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 38 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xcf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 30/38 Celsius +Lifetime Min/Max Temperature: 17/49 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (110) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 921 Vendor specific + diff --git a/HDD/WDC/WD10/WD10JPCX-24UE4T0/A5A98F9254C8 b/HDD/WDC/WD10/WD10JPCX-24UE4T0/A5A98F9254C8 new file mode 100644 index 000000000..da335fdaa --- /dev/null +++ b/HDD/WDC/WD10/WD10JPCX-24UE4T0/A5A98F9254C8 @@ -0,0 +1,99 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD10JPCX-24UE4T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 12:31:28 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (18240) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 204) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 182 178 021 Pre-fail Always - 1875 + 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 148794 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 8027 + 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2423 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 103 +193 Load_Cycle_Count 0x0032 123 123 000 Old_age Always - 231767 +194 Temperature_Celsius 0x0022 123 101 000 Old_age Always - 24 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 +240 Head_Flying_Hours 0x0032 096 096 000 Old_age Always - 3059 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0x50) Completed without error 00% 5 - +# 2 Short offline Completed without error 00% 5 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD10/WD10JPLX-00MBPT0/0BD1D84AFFA7 b/HDD/WDC/WD10/WD10JPLX-00MBPT0/0BD1D84AFFA7 new file mode 100644 index 000000000..d31e0441c --- /dev/null +++ b/HDD/WDC/WD10/WD10JPLX-00MBPT0/0BD1D84AFFA7 @@ -0,0 +1,96 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black Mobile +Device Model: WDC WD10JPLX-00MBPT0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 01.01H01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Oct 19 20:56:29 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 45) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 174) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 + 3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0 + 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 343 + 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 95 + 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 65 +191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 7 +193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 2353 +194 Temperature_Celsius 0x0002 150 150 000 Old_age Always - 40 (Min/Max 22/58) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 +223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD10/WD10JPVX-08JC3T5/C7B531CB1C16 b/HDD/WDC/WD10/WD10JPVX-08JC3T5/C7B531CB1C16 new file mode 100644 index 000000000..059f2bf52 --- /dev/null +++ b/HDD/WDC/WD10/WD10JPVX-08JC3T5/C7B531CB1C16 @@ -0,0 +1,113 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD10JPVX-08JC3T5 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01A05 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 06:13:04 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (18420) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 206) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 3 + 3 Spin_Up_Time 0x0027 183 179 021 Pre-fail Always - 1808 + 4 Start_Stop_Count 0x0032 089 089 000 Old_age Always - 11200 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16295 + 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5667 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 125 +193 Load_Cycle_Count 0x0032 073 073 000 Old_age Always - 383078 +194 Temperature_Celsius 0x0022 111 093 000 Old_age Always - 36 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 +240 Head_Flying_Hours 0x0032 079 079 000 Old_age Always - 15898 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0x50) Completed without error 00% 14074 - +# 2 Short offline Aborted by host 10% 14074 - +# 3 Short offline Aborted by host 10% 13787 - +# 4 Vendor (0x50) Completed without error 00% 12893 - +# 5 Short offline Aborted by host 10% 12893 - +# 6 Vendor (0x50) Aborted by host 10% 12220 - +# 7 Short offline Aborted by host 10% 12220 - +# 8 Vendor (0x50) Completed without error 00% 11474 - +# 9 Short offline Aborted by host 10% 11474 - +#10 Short offline Aborted by host 90% 10027 - +#11 Vendor (0x50) Completed without error 00% 9161 - +#12 Short offline Aborted by host 10% 9161 - +#13 Vendor (0x50) Completed without error 00% 8866 - +#14 Short offline Aborted by host 10% 8866 - +#15 Vendor (0x50) Completed without error 00% 5432 - +#16 Short offline Completed without error 00% 5432 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD10/WD10JPVX-22JC3T0/B4926EC39319 b/HDD/WDC/WD10/WD10JPVX-22JC3T0/B4926EC39319 new file mode 100644 index 000000000..391ed1883 --- /dev/null +++ b/HDD/WDC/WD10/WD10JPVX-22JC3T0/B4926EC39319 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD10JPVX-22JC3T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 22 15:08:56 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (18720) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 209) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 182 177 021 - 1900 + 4 Start_Stop_Count -O--CK 078 078 000 - 22342 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 6361 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2087 +191 G-Sense_Error_Rate -O--CK 083 083 000 - 17 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 +193 Load_Cycle_Count -O--CK 135 135 000 - 197503 +194 Temperature_Celsius -O---K 109 084 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 38 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Stand-by (1) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 27/38 Celsius +Lifetime Min/Max Temperature: 0/63 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (99) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 26430 Vendor specific + diff --git a/HDD/WDC/WD10/WD10JPVX-22JC3T0/B818ED3C5633 b/HDD/WDC/WD10/WD10JPVX-22JC3T0/B818ED3C5633 new file mode 100644 index 000000000..9c7c6c9ac --- /dev/null +++ b/HDD/WDC/WD10/WD10JPVX-22JC3T0/B818ED3C5633 @@ -0,0 +1,97 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD10JPVX-22JC3T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Jul 3 04:16:42 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (17760) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 199) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 184 183 021 Pre-fail Always - 1758 + 4 Start_Stop_Count 0x0032 089 089 000 Old_age Always - 11752 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4211 + 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 180 +191 G-Sense_Error_Rate 0x0032 099 099 000 Old_age Always - 1 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 115 +193 Load_Cycle_Count 0x0032 191 191 000 Old_age Always - 27183 +194 Temperature_Celsius 0x0022 110 092 000 Old_age Always - 37 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD10/WD10PURX-64D85Y0/2DC8B01859A3 b/HDD/WDC/WD10/WD10PURX-64D85Y0/2DC8B01859A3 new file mode 100644 index 000000000..1cec75b98 --- /dev/null +++ b/HDD/WDC/WD10/WD10PURX-64D85Y0/2DC8B01859A3 @@ -0,0 +1,96 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Purple +Device Model: WDC WD10PURX-64D85Y0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Oct 31 00:10:57 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13620) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 155) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 140 138 021 Pre-fail Always - 4000 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 69 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 053 052 000 Old_age Always - 34700 + 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 46 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29 +193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1030 +194 Temperature_Celsius 0x0022 110 102 000 Old_age Always - 33 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD10/WD10PURZ-85U8XY0/0E3CB54E68EA b/HDD/WDC/WD10/WD10PURZ-85U8XY0/0E3CB54E68EA new file mode 100644 index 000000000..1a4994d6d --- /dev/null +++ b/HDD/WDC/WD10/WD10PURZ-85U8XY0/0E3CB54E68EA @@ -0,0 +1,216 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Purple +Device Model: WDC WD10PURZ-85U8XY0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:16 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13140) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 149) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 133 133 021 - 4316 + 4 Start_Stop_Count -O--CK 100 100 000 - 29 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 074 074 000 - 19675 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 29 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 27 +193 Load_Cycle_Count -O--CK 200 200 000 - 2 +194 Temperature_Celsius -O---K 106 101 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 35/39 Celsius +Lifetime Min/Max Temperature: 0/42 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (68) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 19675 --- Power-on Hours +0x01 0x018 6 167885886515 --- Logical Sectors Written +0x01 0x020 6 1134937713 --- Number of Write Commands +0x01 0x028 6 5109725490 --- Logical Sectors Read +0x01 0x030 6 25322391 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 21935 --- Spindle Motor Power-on Hours +0x03 0x010 4 21935 --- Head Flying Hours +0x03 0x018 4 30 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 4 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1446 --- Number of Hardware Resets +0x06 0x010 4 102 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 339 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 411508 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10SPZX-00Z10T0/0C9A767A95DB b/HDD/WDC/WD10/WD10SPZX-00Z10T0/0C9A767A95DB new file mode 100644 index 000000000..c84e747b9 --- /dev/null +++ b/HDD/WDC/WD10/WD10SPZX-00Z10T0/0C9A767A95DB @@ -0,0 +1,175 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10SPZX-00Z10T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 21:43:12 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1320) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 103) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 193 183 021 - 1341 + 4 Start_Stop_Count -O--CK 096 096 000 - 4514 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 1373 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2073 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 69 +193 Load_Cycle_Count -O--CK 191 191 000 - 29930 +194 Temperature_Celsius -O---K 108 079 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 277 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 74 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 507 - +# 2 Short offline Completed without error 00% 153 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 31/35 Celsius +Lifetime Min/Max Temperature: -1/64 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (103) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 18698 Vendor specific + diff --git a/HDD/WDC/WD10/WD10SPZX-00Z10T0/3A45628E93EC b/HDD/WDC/WD10/WD10SPZX-00Z10T0/3A45628E93EC new file mode 100644 index 000000000..970db3e5f --- /dev/null +++ b/HDD/WDC/WD10/WD10SPZX-00Z10T0/3A45628E93EC @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10SPZX-00Z10T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 11:43:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4980) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 113) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 194 191 021 - 1266 + 4 Start_Stop_Count -O--CK 100 100 000 - 127 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 954 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 127 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 5 +193 Load_Cycle_Count -O--CK 200 200 000 - 575 +194 Temperature_Celsius -O---K 113 104 000 - 30 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 74 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 25/31 Celsius +Lifetime Min/Max Temperature: 19/39 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (11) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 7749 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10SPZX-21Z10T0/0C284F0488CA b/HDD/WDC/WD10/WD10SPZX-21Z10T0/0C284F0488CA new file mode 100644 index 000000000..35b2365f4 --- /dev/null +++ b/HDD/WDC/WD10/WD10SPZX-21Z10T0/0C284F0488CA @@ -0,0 +1,194 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10SPZX-21Z10T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 02.01A02 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 4 10:54:18 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9360) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 380) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 192 189 021 - 1375 + 4 Start_Stop_Count -O--CK 001 001 000 - 197157 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 089 089 000 - 8435 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 768 +191 G-Sense_Error_Rate -O--CK 001 001 000 - 24578 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 111 +193 Load_Cycle_Count -O--CK 001 001 000 - 626042 +194 Temperature_Celsius -O---K 106 094 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 277 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 74 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8381 - +# 2 Short offline Completed without error 00% 8358 - +# 3 Short offline Completed without error 00% 8320 - +# 4 Extended offline Completed without error 00% 8303 - +# 5 Short offline Completed without error 00% 8296 - +# 6 Short offline Completed without error 00% 8272 - +# 7 Extended offline Completed without error 00% 8196 - +# 8 Short offline Completed without error 00% 8189 - +# 9 Short offline Completed without error 00% 8074 - +#10 Short offline Completed without error 00% 8050 - +#11 Short offline Completed without error 00% 8026 - +#12 Short offline Completed without error 00% 8002 - +#13 Short offline Completed without error 00% 7966 - +#14 Extended offline Completed without error 00% 7949 - +#15 Short offline Completed without error 00% 7942 - +#16 Short offline Completed without error 00% 7893 - +#17 Short offline Completed without error 00% 7844 - +#18 Extended offline Completed without error 00% 7827 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 21/37 Celsius +Lifetime Min/Max Temperature: 20/49 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (13) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 8838 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10SPZX-21Z10T0/C096B441A6F2 b/HDD/WDC/WD10/WD10SPZX-21Z10T0/C096B441A6F2 new file mode 100644 index 000000000..46d330215 --- /dev/null +++ b/HDD/WDC/WD10/WD10SPZX-21Z10T0/C096B441A6F2 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10SPZX-21Z10T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 02.01A02 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 7 10:03:50 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 240) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 73) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 195 193 021 - 1233 + 4 Start_Stop_Count -O--CK 047 047 000 - 53298 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 2830 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1537 +191 G-Sense_Error_Rate -O--CK 001 001 000 - 450 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 670 +193 Load_Cycle_Count -O--CK 150 150 000 - 151436 +194 Temperature_Celsius -O---K 111 096 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 277 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 74 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Conveyance offline Completed without error 00% 1926 - +# 2 Short offline Completed without error 00% 1926 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 21/32 Celsius +Lifetime Min/Max Temperature: 19/47 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (67) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5023 Vendor specific + diff --git a/HDD/WDC/WD10/WD10SPZX-22Z10T0/A60DA2425B03 b/HDD/WDC/WD10/WD10SPZX-22Z10T0/A60DA2425B03 new file mode 100644 index 000000000..af86575be --- /dev/null +++ b/HDD/WDC/WD10/WD10SPZX-22Z10T0/A60DA2425B03 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10SPZX-22Z10T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 1 21:14:51 2020 PST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1920) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 195 187 021 - 1250 + 4 Start_Stop_Count -O--CK 053 053 000 - 47170 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 094 094 000 - 4742 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 097 097 000 - 3359 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 383 +193 Load_Cycle_Count -O--CK 174 174 000 - 78381 +194 Temperature_Celsius -O---K 104 087 000 - 39 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 277 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 74 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3266 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 38/41 Celsius +Lifetime Min/Max Temperature: 20/56 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (39) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 9226 Vendor specific + + + diff --git a/HDD/WDC/WD10/WD10SPZX-24Z10/7BA72CE7F794 b/HDD/WDC/WD10/WD10SPZX-24Z10/7BA72CE7F794 new file mode 100644 index 000000000..424b1aa7d --- /dev/null +++ b/HDD/WDC/WD10/WD10SPZX-24Z10/7BA72CE7F794 @@ -0,0 +1,110 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10SPZX-24Z10 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 04.01A04 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 14:46:10 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1140) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 26) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 194 188 021 Pre-fail Always - 1266 + 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5512 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2636 + 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1308 +187 Reported_Uncorrect 0x0032 095 095 000 Old_age Always - 5 +192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 882 +193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 12605 +194 Temperature_Celsius 0x0022 117 085 000 Old_age Always - 26 (Min/Max 21/58) +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 +206 Flying_Height 0x0022 100 000 000 Old_age Always - 36 +240 Head_Flying_Hours 0x0032 098 098 000 Old_age Always - 1962 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Aborted by host 80% 1385 - +# 2 Extended offline Completed without error 00% 376 - +# 3 Short offline Completed without error 00% 290 - +# 4 Extended offline Completed without error 00% 3 - +# 5 Conveyance offline Completed without error 00% 3 - +# 6 Extended offline Aborted by host 60% 3 - +# 7 Extended offline Completed without error 00% 2 - +# 8 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD10/WD10SPZX-24Z10/F415239B4144 b/HDD/WDC/WD10/WD10SPZX-24Z10/F415239B4144 new file mode 100644 index 000000000..66999ee98 --- /dev/null +++ b/HDD/WDC/WD10/WD10SPZX-24Z10/F415239B4144 @@ -0,0 +1,184 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD10SPZX-24Z10 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01A05 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 07:27:23 2020 +0330 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 480) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 20) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 195 193 021 - 1208 + 4 Start_Stop_Count -O--CK 100 100 000 - 326 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 91 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 163 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 31 +193 Load_Cycle_Count -O--CK 200 200 000 - 758 +194 Temperature_Celsius -O---K 112 102 000 - 31 (Min/Max 16/41) +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 +206 Flying_Height -O---K 100 000 000 - 36 +240 Head_Flying_Hours -O--CK 100 100 000 - 52 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 74 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 24/33 Celsius +Lifetime Min/Max Temperature: 16/41 Celsius +Specified Max Operating Temperature: 33 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (113) + +SCT Error Recovery Control: + Read: 150 (15.0 seconds) + Write: 150 (15.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 4946 Vendor specific + + + diff --git a/HDD/WDC/WD1001/WD1001FAES-75W7A0/10DEF5C025FD b/HDD/WDC/WD1001/WD1001FAES-75W7A0/10DEF5C025FD new file mode 100644 index 000000000..d5f3a77bd --- /dev/null +++ b/HDD/WDC/WD1001/WD1001FAES-75W7A0/10DEF5C025FD @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD1001FAES-75W7A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01D05 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Jul 30 13:36:29 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (16560) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 192) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 2 + 3 Spin_Up_Time POS--K 182 175 021 - 3875 + 4 Start_Stop_Count -O--CK 100 100 000 - 308 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 029 029 000 - 52397 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 306 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 31 +193 Load_Cycle_Count -O--CK 200 200 000 - 276 +194 Temperature_Celsius -O---K 107 104 000 - 40 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 +240 Head_Flying_Hours -O--CK 032 032 000 - 49775 +241 Total_LBAs_Written -O--CK 200 200 000 - 113345591443 +242 Total_LBAs_Read -O--CK 200 200 000 - 181772986509 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 52386 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/40 Celsius +Lifetime Min/Max Temperature: 40/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (214) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 5177 Vendor specific + diff --git a/HDD/WDC/WD1001/WD1001FALS-00J7B0/256355057E82 b/HDD/WDC/WD1001/WD1001FALS-00J7B0/256355057E82 new file mode 100644 index 000000000..fbecf5c6a --- /dev/null +++ b/HDD/WDC/WD1001/WD1001FALS-00J7B0/256355057E82 @@ -0,0 +1,163 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD1001FALS-00J7B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.00K05 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Thu Oct 29 18:34:40 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (19200) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 221) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 253 253 021 - 6308 + 4 Start_Stop_Count -O--CK 089 089 000 - 11107 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 051 - 0 + 9 Power_On_Hours -O--CK 060 060 000 - 29222 + 10 Spin_Retry_Count -O--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 051 - 0 + 12 Power_Cycle_Count -O--CK 096 096 000 - 4695 +192 Power-Off_Retract_Count -O--CK 199 199 000 - 859 +193 Load_Cycle_Count -O--CK 197 197 000 - 11037 +194 Temperature_Celsius -O---K 113 098 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Unknown (18) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 17/37 Celsius +Lifetime Min/Max Temperature: ?/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (116) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x8000 4 26626 Vendor specific + + + diff --git a/HDD/WDC/WD1002/WD1002FAEX-00Y9A0/01B22AD15917 b/HDD/WDC/WD1002/WD1002FAEX-00Y9A0/01B22AD15917 new file mode 100644 index 000000000..2528d7c6e --- /dev/null +++ b/HDD/WDC/WD1002/WD1002FAEX-00Y9A0/01B22AD15917 @@ -0,0 +1,282 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD1002FAEX-00Y9A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01D05 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 21 12:57:56 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (17100) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 176) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 42 + 3 Spin_Up_Time POS--K 172 169 021 - 4391 + 4 Start_Stop_Count -O--CK 094 094 000 - 6222 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 064 064 000 - 26945 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 094 094 000 - 6217 +192 Power-Off_Retract_Count -O--CK 197 197 000 - 2954 +193 Load_Cycle_Count -O--CK 199 199 000 - 3269 +194 Temperature_Celsius -O---K 114 095 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 6 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 6 [5] occurred at disk power-on lifetime: 13954 hours (581 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 2b 00 d6 54 e0 00 Error: UNC at LBA = 0x2b00d654 = 721475156 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 24 00 00 00 01 00 00 2b 00 d6 54 e0 00 01:05:13.639 READ SECTOR(S) EXT + 42 00 00 00 ff 00 00 2b 00 d5 6d e0 00 01:05:11.943 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2b 00 d4 6e e0 00 01:05:11.942 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2b 00 d3 6f e0 00 01:05:11.941 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2b 00 d2 70 e0 00 01:05:11.938 READ VERIFY SECTOR(S) EXT + +Error 5 [4] occurred at disk power-on lifetime: 13954 hours (581 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 ff 00 00 2b 00 d5 6d e0 00 Error: UNC at LBA = 0x2b00d56d = 721474925 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 42 00 00 00 ff 00 00 2b 00 d5 6d e0 00 01:05:11.943 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2b 00 d4 6e e0 00 01:05:11.942 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2b 00 d3 6f e0 00 01:05:11.941 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2b 00 d2 70 e0 00 01:05:11.938 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2b 00 d1 71 e0 00 01:05:11.938 READ VERIFY SECTOR(S) EXT + +Error 4 [3] occurred at disk power-on lifetime: 13954 hours (581 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 2a 8b 49 0a e0 00 Error: UNC at LBA = 0x2a8b490a = 713771274 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 24 00 00 00 01 00 00 2a 8b 49 0a e0 00 01:00:34.805 READ SECTOR(S) EXT + 42 00 00 00 ff 00 00 2a 8b 49 01 e0 00 01:00:33.102 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2a 8b 48 02 e0 00 01:00:33.101 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2a 8b 47 03 e0 00 01:00:33.100 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2a 8b 46 04 e0 00 01:00:33.099 READ VERIFY SECTOR(S) EXT + +Error 3 [2] occurred at disk power-on lifetime: 13954 hours (581 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 ff 00 00 2a 8b 49 01 e0 00 Error: UNC at LBA = 0x2a8b4901 = 713771265 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 42 00 00 00 ff 00 00 2a 8b 49 01 e0 00 01:00:33.102 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2a 8b 48 02 e0 00 01:00:33.101 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2a 8b 47 03 e0 00 01:00:33.100 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2a 8b 46 04 e0 00 01:00:33.099 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 2a 8b 45 05 e0 00 01:00:33.098 READ VERIFY SECTOR(S) EXT + +Error 2 [1] occurred at disk power-on lifetime: 13953 hours (581 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 00 f3 bd d9 e0 00 Error: UNC at LBA = 0x00f3bdd9 = 15973849 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 24 00 00 00 01 00 00 00 f3 bd d9 e0 00 00:06:53.932 READ SECTOR(S) EXT + 42 00 00 00 ff 00 00 00 f3 bd 4e e0 00 00:06:52.237 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 00 f3 bc 4f e0 00 00:06:52.236 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 00 f3 bb 50 e0 00 00:06:52.234 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 00 f3 ba 51 e0 00 00:06:52.233 READ VERIFY SECTOR(S) EXT + +Error 1 [0] occurred at disk power-on lifetime: 13953 hours (581 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 ff 00 00 00 f3 bd 4e e0 00 Error: UNC at LBA = 0x00f3bd4e = 15973710 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 42 00 00 00 ff 00 00 00 f3 bd 4e e0 00 00:06:52.237 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 00 f3 bc 4f e0 00 00:06:52.236 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 00 f3 bb 50 e0 00 00:06:52.234 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 00 f3 ba 51 e0 00 00:06:52.233 READ VERIFY SECTOR(S) EXT + 42 00 00 00 ff 00 00 00 f3 b9 52 e0 00 00:06:52.232 READ VERIFY SECTOR(S) EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 11932 - +# 2 Short offline Completed without error 00% 4403 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 23/33 Celsius +Lifetime Min/Max Temperature: 0/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (329) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 965 Vendor specific + + + diff --git a/HDD/WDC/WD1002/WD1002FAEX-00Y9A0/1DEB5617EA6C b/HDD/WDC/WD1002/WD1002FAEX-00Y9A0/1DEB5617EA6C new file mode 100644 index 000000000..0e4d8bd40 --- /dev/null +++ b/HDD/WDC/WD1002/WD1002FAEX-00Y9A0/1DEB5617EA6C @@ -0,0 +1,162 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD1002FAEX-00Y9A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01D05 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 15:57:47 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (16560) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 171) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 172 166 021 - 4358 + 4 Start_Stop_Count -O--CK 100 100 000 - 433 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 4190 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 430 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 89 +193 Load_Cycle_Count -O--CK 200 200 000 - 343 +194 Temperature_Celsius -O---K 098 085 000 - 49 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 49 Celsius +Power Cycle Min/Max Temperature: 28/55 Celsius +Lifetime Min/Max Temperature: 28/63 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (227) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 282633 Vendor specific + diff --git a/HDD/WDC/WD1002/WD1002FAEX-00Y9A0/DD0DF20F7546 b/HDD/WDC/WD1002/WD1002FAEX-00Y9A0/DD0DF20F7546 new file mode 100644 index 000000000..572f2566e --- /dev/null +++ b/HDD/WDC/WD1002/WD1002FAEX-00Y9A0/DD0DF20F7546 @@ -0,0 +1,172 @@ +smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-RELEASE amd64] (local build) +Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD1002FAEX-00Y9A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01D05 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 6.0 Gb/s +Local Time is: Wed Jul 15 14:06:21 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 121) The previous self-test completed having + the read element of the test failed. +Total time to complete Offline +data collection: (16560) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 171) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 243 165 021 - 841 + 4 Start_Stop_Count -O--CK 099 099 000 - 1135 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 76195 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1092 +192 Power-Off_Retract_Count -O--CK 199 199 000 - 1018 +193 Load_Cycle_Count -O--CK 200 200 000 - 118 +194 Temperature_Celsius -O---K 097 088 000 - 50 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 2 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 10 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers +Read GP Log Directory failed + +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x09 SL R/W 1 Selective self-test log +0x80-0x9f SL R/W 16 Host vendor specific log +0xa0-0xa7 SL VS 16 Device vendor specific log +0xa8-0xb5 SL VS 1 Device vendor specific log +0xb7 SL VS 1 Device vendor specific log +0xbd SL VS 1 Device vendor specific log +0xc0 SL VS 1 Device vendor specific log +0xe0 SL R/W 1 SCT Command/Status +0xe1 SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed: read failure 90% 10643 443810896 +# 2 Short offline Completed: read failure 90% 10619 443810896 +# 3 Short offline Completed: read failure 90% 10595 443810896 +# 4 Extended offline Completed: read failure 90% 10572 443810896 +# 5 Short offline Completed: read failure 90% 10571 443810896 +# 6 Short offline Completed: read failure 90% 10547 443810896 +# 7 Short offline Completed: read failure 90% 10523 443810896 +# 8 Short offline Completed: read failure 90% 10499 443810896 +# 9 Short offline Completed: read failure 90% 10475 443810896 +#10 Short offline Completed: read failure 90% 10451 443810896 +#11 Short offline Completed: read failure 90% 10427 443810896 +#12 Extended offline Completed: read failure 90% 10404 443810896 +#13 Short offline Completed: read failure 90% 10403 443810896 +#14 Short offline Completed: read failure 10% 10381 443810896 +#15 Short offline Completed: read failure 90% 10355 443810896 +#16 Short offline Completed: read failure 90% 10331 443810896 +#17 Short offline Completed: read failure 90% 10307 443810896 +#18 Short offline Completed: read failure 90% 10284 443810896 +#19 Short offline Completed: read failure 90% 10260 443810896 +#20 Extended offline Completed: read failure 90% 10237 443810896 +#21 Short offline Completed: read failure 90% 10235 443810896 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +SCT Support Level: 1 +Device State: Active (0) +Current Temperature: 50 Celsius +Power Cycle Min/Max Temperature: 42/55 Celsius +Lifetime Min/Max Temperature: 42/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (208) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers +Read SATA Phy Event Counters failed + + + diff --git a/HDD/WDC/WD1002/WD1002FAEX-00Z3A0/7B395F51FAB7 b/HDD/WDC/WD1002/WD1002FAEX-00Z3A0/7B395F51FAB7 new file mode 100644 index 000000000..e208267f9 --- /dev/null +++ b/HDD/WDC/WD1002/WD1002FAEX-00Z3A0/7B395F51FAB7 @@ -0,0 +1,248 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD1002FAEX-00Z3A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01D05 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 21 12:57:56 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (17460) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 202) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 177 174 021 - 4108 + 4 Start_Stop_Count -O--CK 098 098 000 - 2185 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 082 082 000 - 13727 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2185 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 379 +193 Load_Cycle_Count -O--CK 200 200 000 - 1805 +194 Temperature_Celsius -O---K 113 095 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 4 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 4 [3] occurred at disk power-on lifetime: 738 hours (30 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 62 92 7b 54 e0 00 Error: UNC at LBA = 0x62927b54 = 1653766996 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 24 03 00 00 01 00 00 62 92 7b 54 e0 00 02:15:56.679 READ SECTOR(S) EXT + 42 03 00 00 ff 00 00 62 92 7a 70 e0 00 02:15:54.978 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 62 92 79 71 e0 00 02:15:54.977 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 62 92 78 72 e0 00 02:15:54.976 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 62 92 77 73 e0 00 02:15:54.974 READ VERIFY SECTOR(S) EXT + +Error 3 [2] occurred at disk power-on lifetime: 738 hours (30 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 ff 00 00 62 92 7b 54 e0 00 Error: UNC at LBA = 0x62927b54 = 1653766996 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 42 03 00 00 ff 00 00 62 92 7a 70 e0 00 02:15:54.978 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 62 92 79 71 e0 00 02:15:54.977 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 62 92 78 72 e0 00 02:15:54.976 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 62 92 77 73 e0 00 02:15:54.974 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 62 92 76 74 e0 00 02:15:54.973 READ VERIFY SECTOR(S) EXT + +Error 2 [1] occurred at disk power-on lifetime: 738 hours (30 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 52 39 1b 38 e0 00 Error: UNC at LBA = 0x52391b38 = 1379474232 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 24 03 00 00 01 00 00 52 39 1b 38 e0 00 01:46:04.819 READ SECTOR(S) EXT + 42 03 00 00 ff 00 00 52 39 1a 5a e0 00 01:46:03.119 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 52 39 19 5b e0 00 01:46:03.117 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 52 39 18 5c e0 00 01:46:03.116 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 52 39 17 5d e0 00 01:46:03.114 READ VERIFY SECTOR(S) EXT + +Error 1 [0] occurred at disk power-on lifetime: 738 hours (30 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 ff 00 00 52 39 1b 38 e0 00 Error: UNC at LBA = 0x52391b38 = 1379474232 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 42 03 00 00 ff 00 00 52 39 1a 5a e0 00 01:46:03.119 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 52 39 19 5b e0 00 01:46:03.117 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 52 39 18 5c e0 00 01:46:03.116 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 52 39 17 5d e0 00 01:46:03.114 READ VERIFY SECTOR(S) EXT + 42 03 00 00 ff 00 00 52 39 16 5e e0 00 01:46:03.113 READ VERIFY SECTOR(S) EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed: read failure 90% 539 1625608582 +# 2 Extended offline Completed: read failure 90% 441 1625608582 +# 3 Extended offline Completed: read failure 90% 441 1625608582 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 24/33 Celsius +Lifetime Min/Max Temperature: 0/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (174) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 965 Vendor specific + + + diff --git a/HDD/WDC/WD1002/WD1002FBYS-02A6B0/1162B903A588 b/HDD/WDC/WD1002/WD1002FBYS-02A6B0/1162B903A588 new file mode 100644 index 000000000..0e1bf3cd8 --- /dev/null +++ b/HDD/WDC/WD1002/WD1002FBYS-02A6B0/1162B903A588 @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital RE3 Serial ATA +Device Model: WDC WD1002FBYS-02A6B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 03.00C06 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Wed Jul 15 17:32:54 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (18000) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 208) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 253 253 021 - 1083 + 4 Start_Stop_Count -O--CK 100 100 000 - 125 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 91435 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 124 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 101 +193 Load_Cycle_Count -O--CK 200 200 000 - 23 +194 Temperature_Celsius -O---K 108 099 000 - 42 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 26/48 Celsius +Lifetime Min/Max Temperature: 41/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (164) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x8000 4 4585215 Vendor specific + + + diff --git a/HDD/WDC/WD1002/WD1002FBYS-02A6B0/DDDC14EF6798 b/HDD/WDC/WD1002/WD1002FBYS-02A6B0/DDDC14EF6798 new file mode 100644 index 000000000..234258b87 --- /dev/null +++ b/HDD/WDC/WD1002/WD1002FBYS-02A6B0/DDDC14EF6798 @@ -0,0 +1,200 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital RE3 Serial ATA +Device Model: WDC WD1002FBYS-02A6B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 03.00C06 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Wed Jul 15 17:32:54 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (18000) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 208) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 253 253 021 - 1075 + 4 Start_Stop_Count -O--CK 100 100 000 - 127 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 91273 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 123 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 101 +193 Load_Cycle_Count -O--CK 200 200 000 - 25 +194 Temperature_Celsius -O---K 108 099 000 - 42 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 351 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 21584 hours (899 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 74 6d 00 70 af 40 00 Error: IDNF at LBA = 0x746d0070af = 500044951727 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 01 00 c8 00 00 74 70 6d af 40 08 10:08:45.704 WRITE FPDMA QUEUED + 61 00 01 00 c0 00 00 74 70 6d af 40 08 10:08:24.895 WRITE FPDMA QUEUED + 61 00 04 00 b8 00 00 3e 80 00 bf 40 08 10:08:19.840 WRITE FPDMA QUEUED + 61 00 0c 00 b0 00 00 3e 80 2f 5f 40 08 10:08:19.840 WRITE FPDMA QUEUED + 61 00 20 00 a8 00 00 3e 80 2f 3f 40 08 10:08:19.840 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8837 - +# 2 Extended offline Aborted by host 90% 8837 - +# 3 Short offline Completed without error 00% 8834 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 26/49 Celsius +Lifetime Min/Max Temperature: 40/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (15) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x8000 4 4585234 Vendor specific + + + diff --git a/HDD/WDC/WD1003/WD1003FBYX-01Y7B1/0CACBA462703 b/HDD/WDC/WD1003/WD1003FBYX-01Y7B1/0CACBA462703 new file mode 100644 index 000000000..31bc226f4 --- /dev/null +++ b/HDD/WDC/WD1003/WD1003FBYX-01Y7B1/0CACBA462703 @@ -0,0 +1,191 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital RE4 +Device Model: WDC WD1003FBYX-01Y7B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01V02 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 19 06:36:01 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (16080) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 158) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 2 + 3 Spin_Up_Time POS--K 170 170 021 - 4500 + 4 Start_Stop_Count -O--CK 100 100 000 - 39 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 003 003 000 - 71446 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 33 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 16 +193 Load_Cycle_Count -O--CK 200 200 000 - 22 +194 Temperature_Celsius -O---K 116 108 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5905 - +# 2 Short offline Completed without error 00% 5881 - +# 3 Short offline Completed without error 00% 5858 - +# 4 Short offline Completed without error 00% 5834 - +# 5 Extended offline Completed without error 00% 5813 - +# 6 Short offline Completed without error 00% 5810 - +# 7 Short offline Completed without error 00% 5786 - +# 8 Short offline Completed without error 00% 5762 - +# 9 Short offline Completed without error 00% 5738 - +#10 Short offline Completed without error 00% 5714 - +#11 Short offline Completed without error 00% 5690 - +#12 Short offline Completed without error 00% 5666 - +#13 Extended offline Completed without error 00% 5645 - +#14 Short offline Completed without error 00% 5642 - +#15 Short offline Completed without error 00% 5618 - +#16 Short offline Completed without error 00% 5594 - +#17 Short offline Completed without error 00% 5570 - +#18 Short offline Completed without error 00% 5546 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 28/35 Celsius +Lifetime Min/Max Temperature: 28/39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (351) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 41 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 41 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 25372525 Vendor specific + + + diff --git a/HDD/WDC/WD1003/WD1003FBYX-01Y7B1/2073A1073529 b/HDD/WDC/WD1003/WD1003FBYX-01Y7B1/2073A1073529 new file mode 100644 index 000000000..fa7c7ded1 --- /dev/null +++ b/HDD/WDC/WD1003/WD1003FBYX-01Y7B1/2073A1073529 @@ -0,0 +1,191 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital RE4 +Device Model: WDC WD1003FBYX-01Y7B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01V02 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 19 06:36:01 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (15600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 153) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 169 169 021 - 4541 + 4 Start_Stop_Count -O--CK 100 100 000 - 44 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 003 003 000 - 71452 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 37 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 20 +193 Load_Cycle_Count -O--CK 200 200 000 - 23 +194 Temperature_Celsius -O---K 115 106 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5912 - +# 2 Short offline Completed without error 00% 5888 - +# 3 Short offline Completed without error 00% 5864 - +# 4 Short offline Completed without error 00% 5840 - +# 5 Extended offline Completed without error 00% 5820 - +# 6 Short offline Completed without error 00% 5816 - +# 7 Short offline Completed without error 00% 5792 - +# 8 Short offline Completed without error 00% 5768 - +# 9 Short offline Completed without error 00% 5744 - +#10 Short offline Completed without error 00% 5720 - +#11 Short offline Completed without error 00% 5696 - +#12 Short offline Completed without error 00% 5672 - +#13 Extended offline Completed without error 00% 5652 - +#14 Short offline Completed without error 00% 5648 - +#15 Short offline Completed without error 00% 5625 - +#16 Short offline Completed without error 00% 5601 - +#17 Short offline Completed without error 00% 5577 - +#18 Short offline Completed without error 00% 5553 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/36 Celsius +Lifetime Min/Max Temperature: 29/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (391) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 41 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 41 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 25372624 Vendor specific + + + diff --git a/HDD/WDC/WD1003/WD1003FBYX-01Y7B1/7593F514247A b/HDD/WDC/WD1003/WD1003FBYX-01Y7B1/7593F514247A new file mode 100644 index 000000000..688a517a9 --- /dev/null +++ b/HDD/WDC/WD1003/WD1003FBYX-01Y7B1/7593F514247A @@ -0,0 +1,189 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital RE4 +Device Model: WDC WD1003FBYX-01Y7B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01V02 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 19 06:36:01 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (16500) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 162) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 + 3 Spin_Up_Time POS--K 171 170 021 - 4441 + 4 Start_Stop_Count -O--CK 100 100 000 - 39 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 003 003 000 - 71452 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 33 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 16 +193 Load_Cycle_Count -O--CK 200 200 000 - 22 +194 Temperature_Celsius -O---K 115 106 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5912 - +# 2 Short offline Completed without error 00% 5888 - +# 3 Short offline Completed without error 00% 5864 - +# 4 Short offline Completed without error 00% 5840 - +# 5 Extended offline Completed without error 00% 5820 - +# 6 Short offline Completed without error 00% 5816 - +# 7 Short offline Completed without error 00% 5792 - +# 8 Short offline Completed without error 00% 5768 - +# 9 Short offline Completed without error 00% 5744 - +#10 Short offline Completed without error 00% 5720 - +#11 Short offline Completed without error 00% 5696 - +#12 Short offline Completed without error 00% 5672 - +#13 Extended offline Completed without error 00% 5652 - +#14 Short offline Completed without error 00% 5648 - +#15 Short offline Completed without error 00% 5624 - +#16 Short offline Completed without error 00% 5600 - +#17 Short offline Completed without error 00% 5577 - +#18 Short offline Completed without error 00% 5553 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/36 Celsius +Lifetime Min/Max Temperature: 29/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (320) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 41 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 41 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 25372298 Vendor specific + diff --git a/HDD/WDC/WD1003/WD1003FBYX-05Y7B0/CC30870C0244 b/HDD/WDC/WD1003/WD1003FBYX-05Y7B0/CC30870C0244 new file mode 100644 index 000000000..19a9b1a17 --- /dev/null +++ b/HDD/WDC/WD1003/WD1003FBYX-05Y7B0/CC30870C0244 @@ -0,0 +1,177 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-BETA2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital RE4 +Device Model: WDC WD1003FBYX-05Y7B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 00.0NS03 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 20 23:03:46 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (16800) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 165) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 174 168 021 - 4266 + 4 Start_Stop_Count -O--CK 099 099 000 - 1730 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 1357 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1271 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 155 +193 Load_Cycle_Count -O--CK 200 200 000 - 1574 +194 Temperature_Celsius -O---K 109 102 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80 GPL R/W 65535 Host vendor specific log +0x80 SL R/W 255 Host vendor specific log +0x81-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 80% 361 - +# 2 Short offline Completed without error 00% 69 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 37/38 Celsius +Lifetime Min/Max Temperature: 0/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (331) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 9307 Vendor specific + + + diff --git a/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/053B933150C1 b/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/053B933150C1 new file mode 100644 index 000000000..24bf306eb --- /dev/null +++ b/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/053B933150C1 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black +Device Model: WDC WD1003FZEX-00K3CA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Jul 15 14:16:55 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11040) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 114) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 173 173 021 - 2308 + 4 Start_Stop_Count -O--CK 100 100 000 - 54 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 102 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 54 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 32 +193 Load_Cycle_Count -O--CK 200 200 000 - 48 +194 Temperature_Celsius -O---K 115 090 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 24/27 Celsius +Lifetime Min/Max Temperature: 22/53 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (421) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 453 Vendor specific + + + diff --git a/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/175981BD1E24 b/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/175981BD1E24 new file mode 100644 index 000000000..29a8de39c --- /dev/null +++ b/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/175981BD1E24 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black +Device Model: WDC WD1003FZEX-00K3CA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Jul 15 14:16:55 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11100) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 115) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 170 169 021 - 2466 + 4 Start_Stop_Count -O--CK 100 100 000 - 56 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 91 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 56 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 35 +193 Load_Cycle_Count -O--CK 200 200 000 - 46 +194 Temperature_Celsius -O---K 115 088 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 198 000 - 4 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 24/27 Celsius +Lifetime Min/Max Temperature: 23/55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (206) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 453 Vendor specific + + + diff --git a/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/3F4CEB33DC7F b/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/3F4CEB33DC7F new file mode 100644 index 000000000..43538e793 --- /dev/null +++ b/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/3F4CEB33DC7F @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black +Device Model: WDC WD1003FZEX-00K3CA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Jul 15 14:16:55 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10800) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 113) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 175 175 021 - 2216 + 4 Start_Stop_Count -O--CK 100 100 000 - 54 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 93 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 54 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 35 +193 Load_Cycle_Count -O--CK 200 200 000 - 49 +194 Temperature_Celsius -O---K 116 088 000 - 27 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 24/27 Celsius +Lifetime Min/Max Temperature: 22/55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (380) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 453 Vendor specific + diff --git a/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/7C6F5A32B0A4 b/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/7C6F5A32B0A4 new file mode 100644 index 000000000..06223f51e --- /dev/null +++ b/HDD/WDC/WD1003/WD1003FZEX-00K3CA0/7C6F5A32B0A4 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black +Device Model: WDC WD1003FZEX-00K3CA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 24 23:50:53 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12060) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 125) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 174 173 021 - 2300 + 4 Start_Stop_Count -O--CK 100 100 000 - 261 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 253 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 237 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 64 +193 Load_Cycle_Count -O--CK 200 200 000 - 336 +194 Temperature_Celsius -O---K 113 109 000 - 30 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 27/30 Celsius +Lifetime Min/Max Temperature: 22/34 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (113) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 13 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 6495 Vendor specific + + + diff --git a/HDD/WDC/WD1003/WD1003FZEX-00MK2A0/AA9BFC08193B b/HDD/WDC/WD1003/WD1003FZEX-00MK2A0/AA9BFC08193B new file mode 100644 index 000000000..d684a6dd2 --- /dev/null +++ b/HDD/WDC/WD1003/WD1003FZEX-00MK2A0/AA9BFC08193B @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black +Device Model: WDC WD1003FZEX-00MK2A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Jul 26 20:39:37 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10800) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 113) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 170 168 021 - 2483 + 4 Start_Stop_Count -O--CK 098 098 000 - 2159 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 090 090 000 - 7721 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2138 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 216 +193 Load_Cycle_Count -O--CK 200 200 000 - 1942 +194 Temperature_Celsius -O---K 114 104 000 - 29 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 21/29 Celsius +Lifetime Min/Max Temperature: 14/39 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (430) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1381 Vendor specific + + + diff --git a/HDD/WDC/WD1003/WD1003FZEX-00MK2A0/E11D1DB26353 b/HDD/WDC/WD1003/WD1003FZEX-00MK2A0/E11D1DB26353 new file mode 100644 index 000000000..285941fd7 --- /dev/null +++ b/HDD/WDC/WD1003/WD1003FZEX-00MK2A0/E11D1DB26353 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black +Device Model: WDC WD1003FZEX-00MK2A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 13:51:23 2020 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11280) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 117) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 175 172 021 - 2216 + 4 Start_Stop_Count -O--CK 100 100 000 - 90 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 030 030 000 - 51697 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 74 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 36 +193 Load_Cycle_Count -O--CK 199 199 000 - 3041 +194 Temperature_Celsius -O---K 107 100 000 - 36 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 30/40 Celsius +Lifetime Min/Max Temperature: -3/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (390) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1284 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 150 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5977062 Vendor specific + + + diff --git a/HDD/WDC/WD120/WD120EFAX-68UNTN0/6304BFD300BA b/HDD/WDC/WD120/WD120EFAX-68UNTN0/6304BFD300BA new file mode 100644 index 000000000..663d884a6 --- /dev/null +++ b/HDD/WDC/WD120/WD120EFAX-68UNTN0/6304BFD300BA @@ -0,0 +1,216 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD120EFAX-68UNTN0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 81.00A81 +User Capacity: 12,000,138,625,024 bytes [12.0 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 07:52:00 2020 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 87) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1340) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 126 126 054 - 116 + 3 Spin_Up_Time POS--- 157 157 024 - 420 (Average 420) + 4 Start_Stop_Count -O--C- 100 100 000 - 23 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 140 140 020 - 15 + 9 Power_On_Hours -O--C- 100 100 000 - 1418 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6 + 22 Unknown_Attribute PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 243 +193 Load_Cycle_Count -O--C- 100 100 000 - 243 +194 Temperature_Celsius -O---- 166 166 000 - 39 (Min/Max 19/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 38/44 Celsius +Lifetime Min/Max Temperature: 19/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (29) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x010 4 1418 --- Power-on Hours +0x01 0x018 6 12399810616 --- Logical Sectors Written +0x01 0x020 6 49136221 --- Number of Write Commands +0x01 0x028 6 9836076 --- Logical Sectors Read +0x01 0x030 6 544331 --- Number of Read Commands +0x01 0x038 6 5104902750 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 287 --- Spindle Motor Power-on Hours +0x03 0x010 4 287 --- Head Flying Hours +0x03 0x018 4 243 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 39 N-- Average Short Term Temperature +0x05 0x018 1 41 N-- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 53 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 42 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 90 --- Number of Hardware Resets +0x06 0x010 4 26 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 24 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 24 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD120/WD120EMAZ-11BLFA0/5CA4A56EEBCD b/HDD/WDC/WD120/WD120EMAZ-11BLFA0/5CA4A56EEBCD new file mode 100644 index 000000000..252858bc6 --- /dev/null +++ b/HDD/WDC/WD120/WD120EMAZ-11BLFA0/5CA4A56EEBCD @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Ultrastar He10/12 +Device Model: WDC WD120EMAZ-11BLFA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 81.00A81 +User Capacity: 12,000,138,625,024 bytes [12.0 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:01 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 87) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1270) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 127 127 054 - 112 + 3 Spin_Up_Time POS--- 186 186 024 - 365 (Average 342) + 4 Start_Stop_Count -O--C- 100 100 000 - 13 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 140 140 020 - 15 + 9 Power_On_Hours -O--C- 099 099 000 - 7768 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 886 +193 Load_Cycle_Count -O--C- 100 100 000 - 886 +194 Temperature_Celsius -O---- 232 232 000 - 28 (Min/Max 21/38) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 22/37 Celsius +Lifetime Min/Max Temperature: 21/38 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (116) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 7768 --- Power-on Hours +0x01 0x018 6 32053352205 --- Logical Sectors Written +0x01 0x020 6 130721631 --- Number of Write Commands +0x01 0x028 6 38156243740 --- Logical Sectors Read +0x01 0x030 6 174247068 --- Number of Read Commands +0x01 0x038 6 27967668750 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1523 --- Spindle Motor Power-on Hours +0x03 0x010 4 1523 --- Head Flying Hours +0x03 0x018 4 886 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 30 N-- Average Short Term Temperature +0x05 0x018 1 28 N-- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 36 N-- Highest Average Short Term Temperature +0x05 0x038 1 22 N-- Lowest Average Short Term Temperature +0x05 0x040 1 31 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 117 --- Number of Hardware Resets +0x06 0x010 4 33 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD120/WD120EMFZ-11A6JA0/A9F9FBA8D6FE b/HDD/WDC/WD120/WD120EMFZ-11A6JA0/A9F9FBA8D6FE new file mode 100644 index 000000000..da7602d72 --- /dev/null +++ b/HDD/WDC/WD120/WD120EMFZ-11A6JA0/A9F9FBA8D6FE @@ -0,0 +1,221 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD120EMFZ-11A6JA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 81.00A81 +User Capacity: 12,000,138,625,024 bytes [12.0 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:02 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1306) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0 + 2 Throughput_Performance --S--- 135 135 054 - 112 + 3 Spin_Up_Time POS--- 081 081 001 - 387 (Average 387) + 4 Start_Stop_Count -O--C- 100 100 000 - 5 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 001 - 0 + 8 Seek_Time_Performance --S--- 133 133 020 - 18 + 9 Power_On_Hours -O--C- 100 100 000 - 334 + 10 Spin_Retry_Count -O--C- 100 100 001 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 55 +193 Load_Cycle_Count -O--C- 100 100 000 - 55 +194 Temperature_Celsius -O---- 057 057 000 - 28 (Min/Max 23/37) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 23/37 Celsius +Lifetime Min/Max Temperature: 23/37 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) +Minimum supported ERC Time Limit: 70 (7.0 seconds) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (98) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 334 --- Power-on Hours +0x01 0x018 6 11429477477 --- Logical Sectors Written +0x01 0x020 6 45814012 --- Number of Write Commands +0x01 0x028 6 7924016 --- Logical Sectors Read +0x01 0x030 6 345622 --- Number of Read Commands +0x01 0x038 6 1204207650 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 43 --- Spindle Motor Power-on Hours +0x03 0x010 4 43 --- Head Flying Hours +0x03 0x018 4 55 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x04 0x018 4 0 --- Physical Element Status Changed +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 29 N-- Average Short Term Temperature +0x05 0x018 1 - N-- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 35 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 - N-- Highest Average Long Term Temperature +0x05 0x048 1 - N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 18 --- Number of Hardware Resets +0x06 0x010 4 5 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD1200/WD1200BEVT-22ZCT0/7A03DA5A0FA4 b/HDD/WDC/WD1200/WD1200BEVT-22ZCT0/7A03DA5A0FA4 new file mode 100644 index 000000000..92526374e --- /dev/null +++ b/HDD/WDC/WD1200/WD1200BEVT-22ZCT0/7A03DA5A0FA4 @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Blue Serial ATA +Device Model: WDC WD1200BEVT-22ZCT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 11.01A11 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Thu Oct 29 10:09:12 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 128 +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4560) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 57) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 160 159 021 - 1000 + 4 Start_Stop_Count -O--CK 099 099 000 - 1408 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 196 000 - 0 + 9 Power_On_Hours -O--CK 075 075 000 - 18870 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1228 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 482 +193 Load_Cycle_Count -O--CK 001 001 000 - 2243902 +194 Temperature_Celsius -O---K 119 087 000 - 24 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 17915 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 21/28 Celsius +Lifetime Min/Max Temperature: 11/56 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 1/85 Celsius +Temperature History Size (Index): 128 (64) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 0 Device-to-host register FISes sent due to a COMRESET +0x8000 4 1518114 Vendor specific + + + diff --git a/HDD/WDC/WD1600/WD1600AAJS-00PSA0/E72BA36A70BC b/HDD/WDC/WD1600/WD1600AAJS-00PSA0/E72BA36A70BC new file mode 100644 index 000000000..5a67f33af --- /dev/null +++ b/HDD/WDC/WD1600/WD1600AAJS-00PSA0/E72BA36A70BC @@ -0,0 +1,162 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Blue Serial ATA +Device Model: WDC WD1600AAJS-00PSA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.06H05 +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Mon Sep 14 17:19:20 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4200) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 56) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 + 3 Spin_Up_Time PO---- 180 161 021 - 1966 + 4 Start_Stop_Count -O--CK 100 100 000 - 269 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-- 200 200 051 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 101015 + 10 Spin_Retry_Count -O--C- 100 100 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 265 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 212 +193 Load_Cycle_Count -O--CK 200 200 000 - 276 +194 Temperature_Celsius -O---K 103 090 000 - 40 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--C- 200 200 000 - 0 +198 Offline_Uncorrectable ----C- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 12 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 31/45 Celsius +Lifetime Min/Max Temperature: 35/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: 1/85 Celsius +Temperature History Size (Index): 128 (4) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x8000 4 11213830 Vendor specific + + + diff --git a/HDD/WDC/WD1600/WD1600AAJS-60B4A0/C6D486CA5EAC b/HDD/WDC/WD1600/WD1600AAJS-60B4A0/C6D486CA5EAC new file mode 100644 index 000000000..070a1f30c --- /dev/null +++ b/HDD/WDC/WD1600/WD1600AAJS-60B4A0/C6D486CA5EAC @@ -0,0 +1,98 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Blue Serial ATA +Device Model: WDC WD1600AAJS-60B4A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 02.03A02 +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Tue Jul 21 18:28:07 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2880) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 38) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 17 + 3 Spin_Up_Time 0x0027 156 154 021 Pre-fail Always - 3158 + 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3156 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 20948 + 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3140 +184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 088 000 Old_age Always - 24 +190 Airflow_Temperature_Cel 0x0022 066 057 040 Old_age Always - 34 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 154 +193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 3156 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD1600/WD1600BEVT-22ZCT0/7056EF5B4A08 b/HDD/WDC/WD1600/WD1600BEVT-22ZCT0/7056EF5B4A08 new file mode 100644 index 000000000..6163a1779 --- /dev/null +++ b/HDD/WDC/WD1600/WD1600BEVT-22ZCT0/7056EF5B4A08 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Blue Serial ATA +Device Model: WDC WD1600BEVT-22ZCT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 11.01A11 +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Fri Mar 30 10:39:09 2001 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4800) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 59) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 161 157 021 - 908 + 4 Start_Stop_Count -O--CK 099 099 000 - 1897 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 1100 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1491 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 62 +193 Load_Cycle_Count -O--CK 194 194 000 - 19351 +194 Temperature_Celsius -O---K 109 090 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 30/33 Celsius +Lifetime Min/Max Temperature: 22/55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 1/85 Celsius +Temperature History Size (Index): 128 (35) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x8000 4 1020 Vendor specific + diff --git a/HDD/WDC/WD20/WD20EARS-00MVWB0/12CBA6E01FE2 b/HDD/WDC/WD20/WD20EARS-00MVWB0/12CBA6E01FE2 new file mode 100644 index 000000000..12d8e8d32 --- /dev/null +++ b/HDD/WDC/WD20/WD20EARS-00MVWB0/12CBA6E01FE2 @@ -0,0 +1,164 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Green (AF) +Device Model: WDC WD20EARS-00MVWB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 51.0AB51 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Aug 14 22:17:10 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: FAILED! +Drive failure expected in less than 24 hours. SAVE ALL DATA. +See vendor-specific Attribute list for failed Attributes. + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (37500) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 361) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 253 166 021 - 1016 + 4 Start_Stop_Count -O--CK 099 099 000 - 1333 + 5 Reallocated_Sector_Ct PO--CK 133 133 140 NOW 1265 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 018 018 000 - 60382 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 129 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 74 +193 Load_Cycle_Count -O--CK 001 001 000 - 1164001 +194 Temperature_Celsius -O---K 120 088 000 - 30 +196 Reallocated_Event_Count -O--CK 001 001 000 - 1265 +197 Current_Pending_Sector -O--CK 199 196 000 - 609 +198 Offline_Uncorrectable ----CK 200 199 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 103 001 000 - 26112 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed: read failure 90% 49785 312625480 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 26/34 Celsius +Lifetime Min/Max Temperature: 26/62 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (390) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 977472 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EFAX-68FB5N0/404872E35D10 b/HDD/WDC/WD20/WD20EFAX-68FB5N0/404872E35D10 new file mode 100644 index 000000000..e05db317c --- /dev/null +++ b/HDD/WDC/WD20/WD20EFAX-68FB5N0/404872E35D10 @@ -0,0 +1,98 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD20EFAX-68FB5N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 09:49:34 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 60) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 171 169 021 Pre-fail Always - 2433 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 25 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2756 + 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 25 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 20 +193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 30 +194 Temperature_Celsius 0x0022 118 108 000 Old_age Always - 25 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD20/WD20EFAX-68FB5N0/4AA4DE4181E7 b/HDD/WDC/WD20/WD20EFAX-68FB5N0/4AA4DE4181E7 new file mode 100644 index 000000000..dbd7bcc11 --- /dev/null +++ b/HDD/WDC/WD20/WD20EFAX-68FB5N0/4AA4DE4181E7 @@ -0,0 +1,98 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD20EFAX-68FB5N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 09:49:34 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 60) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 171 170 021 Pre-fail Always - 2425 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 25 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2756 + 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 25 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 20 +193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 39 +194 Temperature_Celsius 0x0022 117 107 000 Old_age Always - 26 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD20/WD20EFAX-68FB5N0/52C4F2B3616A b/HDD/WDC/WD20/WD20EFAX-68FB5N0/52C4F2B3616A new file mode 100644 index 000000000..a0cb2868c --- /dev/null +++ b/HDD/WDC/WD20/WD20EFAX-68FB5N0/52C4F2B3616A @@ -0,0 +1,98 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD20EFAX-68FB5N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 09:49:34 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 60) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 169 169 021 Pre-fail Always - 2525 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 25 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2756 + 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 25 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 20 +193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 40 +194 Temperature_Celsius 0x0022 118 108 000 Old_age Always - 25 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD20/WD20EFRX-68AX9N0/0BF87762544A b/HDD/WDC/WD20/WD20EFRX-68AX9N0/0BF87762544A new file mode 100644 index 000000000..6c1f86c8f --- /dev/null +++ b/HDD/WDC/WD20/WD20EFRX-68AX9N0/0BF87762544A @@ -0,0 +1,192 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD20EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:33:01 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (27360) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 276) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 172 170 021 - 4383 + 4 Start_Stop_Count -O--CK 100 100 000 - 127 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 017 017 000 - 60863 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 126 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 75 +193 Load_Cycle_Count -O--CK 200 200 000 - 51 +194 Temperature_Celsius -O---K 119 114 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 55159 - +# 2 Short offline Completed without error 00% 48830 - +# 3 Short offline Completed without error 00% 48710 - +# 4 Short offline Completed without error 00% 48590 - +# 5 Extended offline Completed without error 00% 48548 - +# 6 Short offline Completed without error 00% 48446 - +# 7 Short offline Completed without error 00% 48326 - +# 8 Short offline Completed without error 00% 48206 - +# 9 Short offline Completed without error 00% 48086 - +#10 Short offline Completed without error 00% 47968 - +#11 Short offline Completed without error 00% 47848 - +#12 Extended offline Completed without error 00% 47807 - +#13 Short offline Completed without error 00% 47776 - +#14 Short offline Completed without error 00% 47656 - +#15 Short offline Completed without error 00% 47536 - +#16 Short offline Completed without error 00% 47416 - +#17 Short offline Completed without error 00% 47296 - +#18 Short offline Completed without error 00% 47176 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 23/28 Celsius +Lifetime Min/Max Temperature: 16/33 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (383) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 15027719 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EFRX-68AX9N0/6A552EF76DBD b/HDD/WDC/WD20/WD20EFRX-68AX9N0/6A552EF76DBD new file mode 100644 index 000000000..ecd04d7a9 --- /dev/null +++ b/HDD/WDC/WD20/WD20EFRX-68AX9N0/6A552EF76DBD @@ -0,0 +1,326 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD20EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 21 12:57:56 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (26280) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 266) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 178 175 021 - 6083 + 4 Start_Stop_Count -O--CK 097 097 000 - 3214 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 067 067 000 - 24732 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 097 097 000 - 3207 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 170 +193 Load_Cycle_Count -O--CK 199 199 000 - 3043 +194 Temperature_Celsius -O---K 122 107 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1810 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1810 [9] occurred at disk power-on lifetime: 5094 hours (212 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 00 00 00 40 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + e0 00 00 00 00 00 00 00 00 00 00 40 08 14:59:14.747 STANDBY IMMEDIATE + ea 00 00 00 00 00 00 00 00 00 00 40 08 14:59:13.850 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 40 08 14:59:13.784 FLUSH CACHE EXT + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.872 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.728 READ FPDMA QUEUED + +Error 1809 [8] occurred at disk power-on lifetime: 5094 hours (212 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 00 00 00 40 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 14:59:13.850 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 40 08 14:59:13.784 FLUSH CACHE EXT + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.872 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.728 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.728 READ LOG EXT + +Error 1808 [7] occurred at disk power-on lifetime: 5094 hours (212 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 00 00 00 00 40 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 14:59:13.784 FLUSH CACHE EXT + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.872 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.728 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.728 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.584 READ FPDMA QUEUED + +Error 1807 [6] occurred at disk power-on lifetime: 5093 hours (212 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 4d f6 5b aa 00 00 Device Fault; Error: ABRT at LBA = 0x4df65baa = 1307990954 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.728 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.728 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.584 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.584 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.440 READ FPDMA QUEUED + +Error 1806 [5] occurred at disk power-on lifetime: 5093 hours (212 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 4d f6 5b aa 00 00 Device Fault; Error: ABRT at LBA = 0x4df65baa = 1307990954 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.584 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.584 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.440 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.439 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.296 READ FPDMA QUEUED + +Error 1805 [4] occurred at disk power-on lifetime: 5093 hours (212 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 4d f6 5b aa 00 00 Device Fault; Error: ABRT at LBA = 0x4df65baa = 1307990954 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.440 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.439 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.296 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.295 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.151 READ FPDMA QUEUED + +Error 1804 [3] occurred at disk power-on lifetime: 5093 hours (212 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 4d f6 5b aa 00 00 Device Fault; Error: ABRT at LBA = 0x4df65baa = 1307990954 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.296 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.295 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.151 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.151 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 29 40 08 14:29:21.007 READ FPDMA QUEUED + +Error 1803 [2] occurred at disk power-on lifetime: 5093 hours (212 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 61 00 00 00 00 4d f6 5b aa 00 00 Device Fault; Error: ABRT at LBA = 0x4df65baa = 1307990954 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 01 00 08 00 00 00 00 00 28 40 08 14:29:21.151 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.151 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 29 40 08 14:29:21.007 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 14:29:21.007 READ LOG EXT + 60 00 01 00 08 00 00 00 00 00 29 40 08 14:29:20.863 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8751 - +# 2 Short offline Completed without error 00% 2723 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 23/28 Celsius +Lifetime Min/Max Temperature: 2/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (55) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 963 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EFRX-68AX9N0/B820F8C2D21D b/HDD/WDC/WD20/WD20EFRX-68AX9N0/B820F8C2D21D new file mode 100644 index 000000000..5b9f7bf75 --- /dev/null +++ b/HDD/WDC/WD20/WD20EFRX-68AX9N0/B820F8C2D21D @@ -0,0 +1,192 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD20EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:33:01 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (28020) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 283) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 179 177 021 - 6008 + 4 Start_Stop_Count -O--CK 100 100 000 - 120 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 024 023 000 - 56165 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 119 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 71 +193 Load_Cycle_Count -O--CK 200 200 000 - 48 +194 Temperature_Celsius -O---K 117 109 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 51653 - +# 2 Extended offline Completed without error 00% 51619 - +# 3 Short offline Completed without error 00% 45924 - +# 4 Short offline Completed without error 00% 45924 - +# 5 Short offline Completed without error 00% 45804 - +# 6 Extended offline Completed without error 00% 45762 - +# 7 Short offline Completed without error 00% 45684 - +# 8 Short offline Completed without error 00% 45684 - +# 9 Short offline Completed without error 00% 45565 - +#10 Short offline Completed without error 00% 45564 - +#11 Short offline Completed without error 00% 45445 - +#12 Short offline Completed without error 00% 45444 - +#13 Short offline Completed without error 00% 45325 - +#14 Short offline Completed without error 00% 45205 - +#15 Short offline Completed without error 00% 45085 - +#16 Extended offline Completed without error 00% 45043 - +#17 Short offline Completed without error 00% 44941 - +#18 Short offline Completed without error 00% 44821 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 28/35 Celsius +Lifetime Min/Max Temperature: 17/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (31) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 15027691 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EFRX-68EUZN0/622FF38F89B6 b/HDD/WDC/WD20/WD20EFRX-68EUZN0/622FF38F89B6 new file mode 100644 index 000000000..5983146a6 --- /dev/null +++ b/HDD/WDC/WD20/WD20EFRX-68EUZN0/622FF38F89B6 @@ -0,0 +1,216 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD20EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 30 11:42:21 2020 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (26160) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 177 176 021 - 4116 + 4 Start_Stop_Count -O--CK 100 100 000 - 28 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 093 093 000 - 5752 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 28 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 23 +193 Load_Cycle_Count -O--CK 200 200 000 - 388 +194 Temperature_Celsius -O---K 116 107 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 29/32 Celsius +Lifetime Min/Max Temperature: 24/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (286) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 5752 --- Power-on Hours +0x01 0x018 6 24279092513 --- Logical Sectors Written +0x01 0x020 6 573324567 --- Number of Write Commands +0x01 0x028 6 516623335 --- Logical Sectors Read +0x01 0x030 6 3941341 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5749 --- Spindle Motor Power-on Hours +0x03 0x010 4 5595 --- Head Flying Hours +0x03 0x018 4 412 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 33 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 90 --- Number of Hardware Resets +0x06 0x010 4 35 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 184849 Vendor specific + diff --git a/HDD/WDC/WD20/WD20EFRX-68EUZN0/6AD40DFD29CC b/HDD/WDC/WD20/WD20EFRX-68EUZN0/6AD40DFD29CC new file mode 100644 index 000000000..e84afadea --- /dev/null +++ b/HDD/WDC/WD20/WD20EFRX-68EUZN0/6AD40DFD29CC @@ -0,0 +1,215 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD20EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 21 12:57:57 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (27540) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 278) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 174 170 021 - 4275 + 4 Start_Stop_Count -O--CK 099 099 000 - 1127 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 088 088 000 - 8885 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1127 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 15 +193 Load_Cycle_Count -O--CK 197 197 000 - 10294 +194 Temperature_Celsius -O---K 119 101 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 24/28 Celsius +Lifetime Min/Max Temperature: 17/46 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (285) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1127 --- Lifetime Power-On Resets +0x01 0x010 4 8885 --- Power-on Hours +0x01 0x018 6 4465913932 --- Logical Sectors Written +0x01 0x020 6 23642531 --- Number of Write Commands +0x01 0x028 6 1713858791 --- Logical Sectors Read +0x01 0x030 6 39981912 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8866 --- Spindle Motor Power-on Hours +0x03 0x010 4 1359 --- Head Flying Hours +0x03 0x018 4 10310 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 32 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2291 --- Number of Hardware Resets +0x06 0x010 4 3135 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 966 Vendor specific + diff --git a/HDD/WDC/WD20/WD20EFRX-68EUZN0/8263C108FEA5 b/HDD/WDC/WD20/WD20EFRX-68EUZN0/8263C108FEA5 new file mode 100644 index 000000000..00a31cfbf --- /dev/null +++ b/HDD/WDC/WD20/WD20EFRX-68EUZN0/8263C108FEA5 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD20EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 13:56:34 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (27600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 279) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 178 177 021 - 4066 + 4 Start_Stop_Count -O--CK 100 100 000 - 436 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 042 042 000 - 42701 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 70 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 44 +193 Load_Cycle_Count -O--CK 178 178 000 - 66333 +194 Temperature_Celsius -O---K 112 100 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 21800 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 29/38 Celsius +Lifetime Min/Max Temperature: 21/47 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (210) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 3417725 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EFRX-68EUZN0/85AF050A31D5 b/HDD/WDC/WD20/WD20EFRX-68EUZN0/85AF050A31D5 new file mode 100644 index 000000000..d039fabfa --- /dev/null +++ b/HDD/WDC/WD20/WD20EFRX-68EUZN0/85AF050A31D5 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD20EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 13:56:33 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (26160) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 175 174 021 - 4216 + 4 Start_Stop_Count -O--CK 100 100 000 - 820 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 034 034 000 - 48894 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 110 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 70 +193 Load_Cycle_Count -O--CK 166 166 000 - 103955 +194 Temperature_Celsius -O---K 113 098 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 27993 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 29/38 Celsius +Lifetime Min/Max Temperature: 21/50 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (349) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 3417749 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EFRX-68EUZN0/9ECD66DCF233 b/HDD/WDC/WD20/WD20EFRX-68EUZN0/9ECD66DCF233 new file mode 100644 index 000000000..385398dee --- /dev/null +++ b/HDD/WDC/WD20/WD20EFRX-68EUZN0/9ECD66DCF233 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD20EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 13:56:34 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (26760) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 270) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 177 176 021 - 4141 + 4 Start_Stop_Count -O--CK 100 100 000 - 897 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 034 034 000 - 48589 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 104 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 69 +193 Load_Cycle_Count -O--CK 177 177 000 - 69888 +194 Temperature_Celsius -O---K 113 098 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 28881 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 28/37 Celsius +Lifetime Min/Max Temperature: 21/49 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (445) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 3417782 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EFRX-68EUZN0/DE4DC3CB6745 b/HDD/WDC/WD20/WD20EFRX-68EUZN0/DE4DC3CB6745 new file mode 100644 index 000000000..789dce2d3 --- /dev/null +++ b/HDD/WDC/WD20/WD20EFRX-68EUZN0/DE4DC3CB6745 @@ -0,0 +1,326 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD20EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 21 12:57:56 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (25800) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 261) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 248 + 3 Spin_Up_Time POS--K 169 165 021 - 4508 + 4 Start_Stop_Count -O--CK 097 097 000 - 3011 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 1 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 078 078 000 - 16269 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2195 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 108 +193 Load_Cycle_Count -O--CK 186 186 000 - 43490 +194 Temperature_Celsius -O---K 120 099 000 - 27 +196 Reallocated_Event_Count -O--CK 199 199 000 - 1 +197 Current_Pending_Sector -O--CK 200 200 000 - 1 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 377 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 377 [16] occurred at disk power-on lifetime: 2879 hours (119 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 e3 b6 64 90 40 00 Error: UNC at LBA = 0xe3b66490 = 3820381328 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 08 00 00 e3 b6 64 90 40 08 00:13:51.700 READ FPDMA QUEUED + 60 00 08 00 00 00 00 e2 5d ca 00 40 08 00:13:51.697 READ FPDMA QUEUED + 60 00 10 00 f8 00 00 e2 57 01 c0 40 08 00:13:51.664 READ FPDMA QUEUED + 60 00 08 00 f0 00 00 e2 57 01 d0 40 08 00:13:51.642 READ FPDMA QUEUED + 60 00 10 00 e8 00 00 e2 5d ca 60 40 08 00:13:51.570 READ FPDMA QUEUED + +Error 376 [15] occurred at disk power-on lifetime: 411 hours (17 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 1a 12 29 70 40 00 Error: WP at LBA = 0x1a122970 = 437397872 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 68 00 00 34 01 b0 40 40 08 00:09:08.588 WRITE FPDMA QUEUED + 61 01 00 00 68 00 00 34 01 af 40 40 08 00:09:08.588 WRITE FPDMA QUEUED + 61 01 00 00 68 00 00 34 01 ae 40 40 08 00:09:08.587 WRITE FPDMA QUEUED + 61 01 00 00 68 00 00 34 01 ad 40 40 08 00:09:08.587 WRITE FPDMA QUEUED + 61 01 00 00 68 00 00 34 01 ac 40 40 08 00:09:08.586 WRITE FPDMA QUEUED + +Error 375 [14] occurred at disk power-on lifetime: 411 hours (17 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 03 0a 91 e0 40 00 Error: WP at LBA = 0x030a91e0 = 51024352 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 28 00 00 1a 1d ae 20 40 08 00:06:09.326 WRITE FPDMA QUEUED + 61 00 10 00 28 00 00 1a 1d ae 28 40 08 00:06:09.326 WRITE FPDMA QUEUED + 61 00 08 00 28 00 00 1a 1d 9d 90 40 08 00:06:09.324 WRITE FPDMA QUEUED + 61 00 10 00 28 00 00 1a 1d 9d 50 40 08 00:06:09.324 WRITE FPDMA QUEUED + 61 00 08 00 28 00 00 1a 1d 9d 28 40 08 00:06:09.324 WRITE FPDMA QUEUED + +Error 374 [13] occurred at disk power-on lifetime: 411 hours (17 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 03 cf 94 d8 40 00 Error: WP at LBA = 0x03cf94d8 = 63935704 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 d8 00 00 1a 56 be c8 40 08 00:03:42.755 WRITE FPDMA QUEUED + 61 01 00 00 d8 00 00 1a 56 bd c8 40 08 00:03:42.754 WRITE FPDMA QUEUED + 61 01 00 00 d8 00 00 1a 56 bc c8 40 08 00:03:42.753 WRITE FPDMA QUEUED + 61 01 00 00 d8 00 00 1a 56 bb c8 40 08 00:03:42.753 WRITE FPDMA QUEUED + 61 01 00 00 d8 00 00 1a 56 ba c8 40 08 00:03:42.751 WRITE FPDMA QUEUED + +Error 373 [12] occurred at disk power-on lifetime: 411 hours (17 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 1a 29 a2 80 40 00 Error: IDNF at LBA = 0x1a29a280 = 438936192 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 60 00 00 1a 29 a2 80 40 08 00:02:17.250 WRITE FPDMA QUEUED + 61 01 00 00 60 00 00 1a 29 a1 80 40 08 00:02:17.249 WRITE FPDMA QUEUED + 61 01 00 00 60 00 00 1a 29 a0 80 40 08 00:02:17.249 WRITE FPDMA QUEUED + 61 01 00 00 60 00 00 1a 29 9f 80 40 08 00:02:17.248 WRITE FPDMA QUEUED + 61 01 00 00 60 00 00 1a 29 9e 80 40 08 00:02:17.246 WRITE FPDMA QUEUED + +Error 372 [11] occurred at disk power-on lifetime: 411 hours (17 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 1a 2b da 80 00 00 Error: IDNF at LBA = 0x1a2bda80 = 439081600 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 c8 00 f0 00 00 1a 2b da 80 40 08 00:29:21.858 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:29:21.858 READ LOG EXT + 61 00 c8 00 b0 00 00 1a 2b da 80 40 08 00:29:14.860 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:29:14.860 READ LOG EXT + 61 00 c8 00 70 00 00 1a 2b da 80 40 08 00:29:07.859 WRITE FPDMA QUEUED + +Error 371 [10] occurred at disk power-on lifetime: 411 hours (17 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 1a 2b da 80 00 00 Error: IDNF at LBA = 0x1a2bda80 = 439081600 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 c8 00 b0 00 00 1a 2b da 80 40 08 00:29:14.860 WRITE FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:29:14.860 READ LOG EXT + 61 00 c8 00 70 00 00 1a 2b da 80 40 08 00:29:07.859 WRITE FPDMA QUEUED + 61 00 c8 00 68 00 00 1a 2b de 80 40 08 00:29:07.858 WRITE FPDMA QUEUED + 61 00 c8 00 60 00 00 1a 2b e1 80 40 08 00:29:07.858 WRITE FPDMA QUEUED + +Error 370 [9] occurred at disk power-on lifetime: 411 hours (17 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 1a 2b da 80 40 00 Error: IDNF at LBA = 0x1a2bda80 = 439081600 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 c8 00 70 00 00 1a 2b da 80 40 08 00:29:07.859 WRITE FPDMA QUEUED + 61 00 c8 00 68 00 00 1a 2b de 80 40 08 00:29:07.858 WRITE FPDMA QUEUED + 61 00 c8 00 60 00 00 1a 2b e1 80 40 08 00:29:07.858 WRITE FPDMA QUEUED + 61 01 00 00 58 00 00 1a 26 51 48 40 08 00:29:07.857 WRITE FPDMA QUEUED + 61 00 d0 00 50 00 00 1a 2b df 80 40 08 00:29:07.857 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 373 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 23/27 Celsius +Lifetime Min/Max Temperature: 2/48 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (291) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 964 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EZAZ-00GGJB0/26B190CA4E7B b/HDD/WDC/WD20/WD20EZAZ-00GGJB0/26B190CA4E7B new file mode 100644 index 000000000..792a2c16d --- /dev/null +++ b/HDD/WDC/WD20/WD20EZAZ-00GGJB0/26B190CA4E7B @@ -0,0 +1,225 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD20EZAZ-00GGJB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 2 00:04:43 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (58620) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 233) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 172 172 021 - 2383 + 4 Start_Stop_Count -O--CK 100 100 000 - 6 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 6740 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 4 +193 Load_Cycle_Count -O--CK 156 156 000 - 132393 +194 Temperature_Celsius -O---K 111 106 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 291 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 74 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 24/37 Celsius +Lifetime Min/Max Temperature: 24/37 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (220) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x010 4 6740 --- Power-on Hours +0x01 0x018 6 32773854321 --- Logical Sectors Written +0x01 0x020 6 659645007 --- Number of Write Commands +0x01 0x028 6 85211394196 --- Logical Sectors Read +0x01 0x030 6 391907043 --- Number of Read Commands +0x01 0x038 6 2789163520 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6627 --- Spindle Motor Power-on Hours +0x03 0x010 4 6449 --- Head Flying Hours +0x03 0x018 4 132398 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 4 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 37 --- Number of Hardware Resets +0x06 0x010 4 18 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x008 7 0 --- Vendor Specific +0xff 0x010 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 23018564 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EZAZ-00GGJB0/3B5AF02E9179 b/HDD/WDC/WD20/WD20EZAZ-00GGJB0/3B5AF02E9179 new file mode 100644 index 000000000..e0449ec31 --- /dev/null +++ b/HDD/WDC/WD20/WD20EZAZ-00GGJB0/3B5AF02E9179 @@ -0,0 +1,225 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD20EZAZ-00GGJB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 2 00:04:44 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (51720) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 193) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 100 253 021 - 0 + 4 Start_Stop_Count -O--CK 100 100 000 - 5 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 6740 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 3 +193 Load_Cycle_Count -O--CK 150 150 000 - 150848 +194 Temperature_Celsius -O---K 110 104 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 291 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 74 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 25/39 Celsius +Lifetime Min/Max Temperature: 20/39 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (220) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 6740 --- Power-on Hours +0x01 0x018 6 33738960446 --- Logical Sectors Written +0x01 0x020 6 689283264 --- Number of Write Commands +0x01 0x028 6 85381703578 --- Logical Sectors Read +0x01 0x030 6 405778898 --- Number of Read Commands +0x01 0x038 6 2789163520 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6626 --- Spindle Motor Power-on Hours +0x03 0x010 4 6419 --- Head Flying Hours +0x03 0x018 4 150852 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 3 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 26 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 33 --- Number of Hardware Resets +0x06 0x010 4 17 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x008 7 0 --- Vendor Specific +0xff 0x010 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 23018646 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EZAZ-00GGJB0/9AB7380DC6FB b/HDD/WDC/WD20/WD20EZAZ-00GGJB0/9AB7380DC6FB new file mode 100644 index 000000000..4fdb5fb2d --- /dev/null +++ b/HDD/WDC/WD20/WD20EZAZ-00GGJB0/9AB7380DC6FB @@ -0,0 +1,223 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD20EZAZ-00GGJB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 2 00:04:44 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (58740) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 225) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 172 172 021 - 2400 + 4 Start_Stop_Count -O--CK 100 100 000 - 6 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 6740 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 0 +193 Load_Cycle_Count -O--CK 155 155 000 - 135549 +194 Temperature_Celsius -O---K 112 106 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 291 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 74 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 22/37 Celsius +Lifetime Min/Max Temperature: 18/37 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (216) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 6 --- Lifetime Power-On Resets +0x01 0x010 4 6740 --- Power-on Hours +0x01 0x018 6 32800691553 --- Logical Sectors Written +0x01 0x020 6 658868177 --- Number of Write Commands +0x01 0x028 6 85150688899 --- Logical Sectors Read +0x01 0x030 6 394254800 --- Number of Read Commands +0x01 0x038 6 2789163520 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6626 --- Spindle Motor Power-on Hours +0x03 0x010 4 6444 --- Head Flying Hours +0x03 0x018 4 135550 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 770 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 0 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 37 --- Number of Hardware Resets +0x06 0x010 4 19 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x008 7 0 --- Vendor Specific +0xff 0x010 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 23018479 Vendor specific + diff --git a/HDD/WDC/WD20/WD20EZAZ-00GGJB0/C30BC72582C5 b/HDD/WDC/WD20/WD20EZAZ-00GGJB0/C30BC72582C5 new file mode 100644 index 000000000..f5f9e6ae9 --- /dev/null +++ b/HDD/WDC/WD20/WD20EZAZ-00GGJB0/C30BC72582C5 @@ -0,0 +1,225 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD20EZAZ-00GGJB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 2 00:04:43 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (58320) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 195) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 100 253 021 - 0 + 4 Start_Stop_Count -O--CK 100 100 000 - 5 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 6740 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 1 +193 Load_Cycle_Count -O--CK 150 150 000 - 150832 +194 Temperature_Celsius -O---K 114 108 000 - 29 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 291 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 74 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 21/35 Celsius +Lifetime Min/Max Temperature: 19/35 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (215) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 6740 --- Power-on Hours +0x01 0x018 6 33738899582 --- Logical Sectors Written +0x01 0x020 6 690939811 --- Number of Write Commands +0x01 0x028 6 85435780477 --- Logical Sectors Read +0x01 0x030 6 406010710 --- Number of Read Commands +0x01 0x038 6 2789163520 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6626 --- Spindle Motor Power-on Hours +0x03 0x010 4 6419 --- Head Flying Hours +0x03 0x018 4 150834 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 2 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 1 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 35 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 33 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 33 --- Number of Hardware Resets +0x06 0x010 4 17 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == +0xff 0x008 7 0 --- Vendor Specific +0xff 0x010 7 0 --- Vendor Specific +0xff 0x018 7 0 --- Vendor Specific + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 23018320 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EZRX-00D8PB0/A023DDB70B35 b/HDD/WDC/WD20/WD20EZRX-00D8PB0/A023DDB70B35 new file mode 100644 index 000000000..ecd892ade --- /dev/null +++ b/HDD/WDC/WD20/WD20EZRX-00D8PB0/A023DDB70B35 @@ -0,0 +1,319 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Green +Device Model: WDC WD20EZRX-00D8PB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 30 22:22:52 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (25920) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 262) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 173 168 021 - 4325 + 4 Start_Stop_Count -O--CK 100 100 000 - 149 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 023 023 000 - 56553 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 149 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 110 +193 Load_Cycle_Count -O--CK 178 178 000 - 66617 +194 Temperature_Celsius -O---K 115 106 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 40 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 40 [15] occurred at disk power-on lifetime: 56425 hours (2351 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:26.304 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:26.267 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.201 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:26.198 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.198 IDENTIFY DEVICE + +Error 39 [14] occurred at disk power-on lifetime: 56405 hours (2350 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:24.055 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:23.989 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.989 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:23.936 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:23.936 IDENTIFY DEVICE + +Error 38 [13] occurred at disk power-on lifetime: 56390 hours (2349 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:01:00.583 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:01:00.519 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:00.519 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:01:00.467 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:00.466 IDENTIFY DEVICE + +Error 37 [12] occurred at disk power-on lifetime: 56390 hours (2349 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:26.415 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:26.387 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.375 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:26.304 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.304 IDENTIFY DEVICE + +Error 36 [11] occurred at disk power-on lifetime: 56390 hours (2349 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:25.337 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:25.302 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:25.302 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:25.240 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:25.240 IDENTIFY DEVICE + +Error 35 [10] occurred at disk power-on lifetime: 56112 hours (2338 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 03:30:59.909 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 03:30:59.882 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 03:30:59.870 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 03:30:59.846 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 03:30:59.846 IDENTIFY DEVICE + +Error 34 [9] occurred at disk power-on lifetime: 56109 hours (2337 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:24.454 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:24.431 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.430 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:24.333 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.333 IDENTIFY DEVICE + +Error 33 [8] occurred at disk power-on lifetime: 56109 hours (2337 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:44.250 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:44.184 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:44.183 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:44.131 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:44.130 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 32/35 Celsius +Lifetime Min/Max Temperature: 2/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (368) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 459210 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EZRX-00D8PB0/BA75430679CF b/HDD/WDC/WD20/WD20EZRX-00D8PB0/BA75430679CF new file mode 100644 index 000000000..f05b97361 --- /dev/null +++ b/HDD/WDC/WD20/WD20EZRX-00D8PB0/BA75430679CF @@ -0,0 +1,319 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Green +Device Model: WDC WD20EZRX-00D8PB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 30 22:22:52 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (28080) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 284) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 176 172 021 - 4166 + 4 Start_Stop_Count -O--CK 100 100 000 - 147 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 023 023 000 - 56664 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 147 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 108 +193 Load_Cycle_Count -O--CK 178 178 000 - 67641 +194 Temperature_Celsius -O---K 116 106 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 40 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 40 [15] occurred at disk power-on lifetime: 56537 hours (2355 days + 17 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:26.504 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:26.436 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.436 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:26.383 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.382 IDENTIFY DEVICE + +Error 39 [14] occurred at disk power-on lifetime: 56516 hours (2354 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:24.423 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:24.396 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.383 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:24.314 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.313 IDENTIFY DEVICE + +Error 38 [13] occurred at disk power-on lifetime: 56501 hours (2354 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:01:00.851 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:01:00.824 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:00.812 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:01:00.744 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:00.744 IDENTIFY DEVICE + +Error 37 [12] occurred at disk power-on lifetime: 56501 hours (2354 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:26.602 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:26.535 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.534 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:26.482 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.482 IDENTIFY DEVICE + +Error 36 [11] occurred at disk power-on lifetime: 56501 hours (2354 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:25.596 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:25.536 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:25.535 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:25.483 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:25.483 IDENTIFY DEVICE + +Error 35 [10] occurred at disk power-on lifetime: 56224 hours (2342 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 03:31:00.223 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 03:31:00.200 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 03:31:00.200 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 03:31:00.145 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 03:31:00.143 IDENTIFY DEVICE + +Error 34 [9] occurred at disk power-on lifetime: 56220 hours (2342 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:24.744 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:24.717 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.704 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:24.681 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.680 IDENTIFY DEVICE + +Error 33 [8] occurred at disk power-on lifetime: 56220 hours (2342 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 3f 00 00 00 01 00 00 00 00 00 e0 40 00 00:00:44.532 WRITE LOG EXT + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:44.489 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:44.426 IDENTIFY DEVICE + b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:00:44.423 SMART READ DATA + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:44.422 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 31/34 Celsius +Lifetime Min/Max Temperature: 17/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (358) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 459214 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20EZRX-00DC0B0/D76D8DE2B93D b/HDD/WDC/WD20/WD20EZRX-00DC0B0/D76D8DE2B93D new file mode 100644 index 000000000..0abb7926c --- /dev/null +++ b/HDD/WDC/WD20/WD20EZRX-00DC0B0/D76D8DE2B93D @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Green +Device Model: WDC WD20EZRX-00DC0B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 29 10:15:25 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (26940) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 272) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70b5) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 2 + 3 Spin_Up_Time POS--K 177 174 021 - 6150 + 4 Start_Stop_Count -O--CK 100 100 000 - 367 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 017 017 000 - 60647 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 366 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 233 +193 Load_Cycle_Count -O--CK 001 001 000 - 5961077 +194 Temperature_Celsius -O---K 109 096 000 - 41 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 59818 - +# 2 Short offline Completed without error 00% 59794 - +# 3 Short offline Completed without error 00% 47895 - +# 4 Short offline Completed without error 00% 47871 - +# 5 Short offline Completed without error 00% 47847 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 37/43 Celsius +Lifetime Min/Max Temperature: 18/54 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (380) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 12 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 53793 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20NMVW-59EDZS7/E0F32C67F709 b/HDD/WDC/WD20/WD20NMVW-59EDZS7/E0F32C67F709 new file mode 100644 index 000000000..9dce5f67c --- /dev/null +++ b/HDD/WDC/WD20/WD20NMVW-59EDZS7/E0F32C67F709 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Elements / My Passport (USB, AF) +Device Model: WDC WD20NMVW-59EDZS7 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 16:17:19 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (36840) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 407) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 201 200 021 - 4950 + 4 Start_Stop_Count -O--CK 100 100 000 - 512 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 090 090 000 - 7683 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 25 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 14 +193 Load_Cycle_Count -O--CK 171 171 000 - 89867 +194 Temperature_Celsius -O---K 115 097 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 39 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 22/55 Celsius +Lifetime Min/Max Temperature: 14/55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (68) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 20641926 Vendor specific + diff --git a/HDD/WDC/WD20/WD20PURX-64P6ZY0/FD0E4AF11A52 b/HDD/WDC/WD20/WD20PURX-64P6ZY0/FD0E4AF11A52 new file mode 100644 index 000000000..b2d6c791d --- /dev/null +++ b/HDD/WDC/WD20/WD20PURX-64P6ZY0/FD0E4AF11A52 @@ -0,0 +1,98 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Purple +Device Model: WDC WD20PURX-64P6ZY0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 23:09:28 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (26400) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 266) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 178 174 021 Pre-fail Always - 4066 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 278 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 18457 + 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 276 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 28 +193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 601 +194 Temperature_Celsius 0x0022 111 089 000 Old_age Always - 36 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD20/WD20SDRW-11VUUS0/D403A6A5CE94 b/HDD/WDC/WD20/WD20SDRW-11VUUS0/D403A6A5CE94 new file mode 100644 index 000000000..a33e516a8 --- /dev/null +++ b/HDD/WDC/WD20/WD20SDRW-11VUUS0/D403A6A5CE94 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD20SDRW-11VUUS0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 2,000,365,379,584 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 08:39:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 840) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 194 189 021 - 3291 + 4 Start_Stop_Count -O--CK 099 099 000 - 1181 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 098 098 000 - 1974 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 95 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 74 +193 Load_Cycle_Count -O--CK 198 198 000 - 8032 +194 Temperature_Celsius -O---K 114 091 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 76 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xcf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 32/47 Celsius +Lifetime Min/Max Temperature: 22/56 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (45) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 85594 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20SDZW-11JJ8S0/118D4A992C00 b/HDD/WDC/WD20/WD20SDZW-11JJ8S0/118D4A992C00 new file mode 100644 index 000000000..42c6112a5 --- /dev/null +++ b/HDD/WDC/WD20/WD20SDZW-11JJ8S0/118D4A992C00 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD20SDZW-11JJ8S0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 2,000,365,379,584 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 16:17:13 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1980) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 142) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 199 193 021 - 3033 + 4 Start_Stop_Count -O--CK 100 100 000 - 503 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 5873 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 6 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 0 +193 Load_Cycle_Count -O--CK 200 200 000 - 1973 +194 Temperature_Celsius -O---K 114 093 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 76 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xcf GPL VS 65535 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 22/54 Celsius +Lifetime Min/Max Temperature: 18/54 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (41) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 970 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 972 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 20641908 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20SPZX-22UA7T0/1AFC2F1323E1 b/HDD/WDC/WD20/WD20SPZX-22UA7T0/1AFC2F1323E1 new file mode 100644 index 000000000..f59b392b7 --- /dev/null +++ b/HDD/WDC/WD20/WD20SPZX-22UA7T0/1AFC2F1323E1 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD20SPZX-22UA7T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 16 12:50:34 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 240) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 127) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 216 216 021 - 2158 + 4 Start_Stop_Count -O--CK 100 100 000 - 22 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 539 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 22 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 15 +193 Load_Cycle_Count -O--CK 189 189 000 - 33771 +194 Temperature_Celsius -O---K 113 104 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 76 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 25/42 Celsius +Lifetime Min/Max Temperature: 24/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (24) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 830520 Vendor specific + + + diff --git a/HDD/WDC/WD20/WD20SPZX-22UA7T0/9B354F617A9D b/HDD/WDC/WD20/WD20SPZX-22UA7T0/9B354F617A9D new file mode 100644 index 000000000..54db69395 --- /dev/null +++ b/HDD/WDC/WD20/WD20SPZX-22UA7T0/9B354F617A9D @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD20SPZX-22UA7T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 16 12:50:34 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 240) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 125) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 223 223 021 - 1816 + 4 Start_Stop_Count -O--CK 100 100 000 - 22 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 539 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 22 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 15 +193 Load_Cycle_Count -O--CK 189 189 000 - 33734 +194 Temperature_Celsius -O---K 114 105 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 288 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 76 Device vendor specific log +0xb9 GPL,SL VS 4 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 25/41 Celsius +Lifetime Min/Max Temperature: 24/42 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (25) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 830523 Vendor specific + diff --git a/HDD/WDC/WD2000/WD2000FYYX/0DA384D7BA35 b/HDD/WDC/WD2000/WD2000FYYX/0DA384D7BA35 new file mode 100644 index 000000000..a9a465586 --- /dev/null +++ b/HDD/WDC/WD2000/WD2000FYYX/0DA384D7BA35 @@ -0,0 +1,188 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WD2000FYYX +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Add. Product Id: DELL(tm) +Firmware Version: 00.0D1K5 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 7 10:58:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 90) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 277) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 211 210 021 - 4450 + 4 Start_Stop_Count -O--CK 100 100 000 - 13 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 060 060 000 - 29736 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 + 16 Unknown_Attribute -O---K 136 000 000 - 7311640014391 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 7 +193 Load_Cycle_Count -O--CK 200 200 000 - 16 +194 Temperature_Celsius -O---K 122 116 000 - 28 (Min/Max 18/34) +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 +241 Total_LBAs_Written -O--CK 193 193 000 - 7301700044362 +242 Total_LBAs_Read -O--CK 200 200 000 - 9939970029 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 1 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xd0 GPL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3428 - +# 2 Short offline Completed without error 00% 3244 - +# 3 Short offline Completed without error 00% 1850 - +# 4 Short offline Completed without error 00% 186 - +# 5 Short offline Completed without error 00% 2 - +# 6 Vendor (0xdf) Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 24/34 Celsius +Lifetime Min/Max Temperature: 18/34 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (85) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 69 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 70 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 98006650 Vendor specific + diff --git a/HDD/WDC/WD2000/WD2000FYYX/1ABCA4E5F625 b/HDD/WDC/WD2000/WD2000FYYX/1ABCA4E5F625 new file mode 100644 index 000000000..232ce4fb4 --- /dev/null +++ b/HDD/WDC/WD2000/WD2000FYYX/1ABCA4E5F625 @@ -0,0 +1,189 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WD2000FYYX +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Add. Product Id: DELL(tm) +Firmware Version: 00.0D1K5 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 7 10:58:41 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 90) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 277) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 213 212 021 - 4316 + 4 Start_Stop_Count -O--CK 100 100 000 - 11 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 049 049 000 - 37689 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 11 + 16 Unknown_Attribute -O---K 044 000 000 - 2412036586262 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 7 +193 Load_Cycle_Count -O--CK 200 200 000 - 8 +194 Temperature_Celsius -O---K 119 114 000 - 31 (Min/Max 18/36) +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 +241 Total_LBAs_Written -O--CK 198 198 000 - 2196155782032 +242 Total_LBAs_Read -O--CK 200 200 000 - 215880804230 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 1 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xd0 GPL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 11377 - +# 2 Short offline Completed without error 00% 11192 - +# 3 Short offline Completed without error 00% 186 - +# 4 Short offline Completed without error 00% 2 - +# 5 Vendor (0xdf) Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 28/36 Celsius +Lifetime Min/Max Temperature: 18/36 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (386) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 85 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 86 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 98007098 Vendor specific + + + diff --git a/HDD/WDC/WD2000/WD2000FYYX/1CEEBB1625D0 b/HDD/WDC/WD2000/WD2000FYYX/1CEEBB1625D0 new file mode 100644 index 000000000..a4cc86535 --- /dev/null +++ b/HDD/WDC/WD2000/WD2000FYYX/1CEEBB1625D0 @@ -0,0 +1,187 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WD2000FYYX +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Add. Product Id: DELL(tm) +Firmware Version: 00.0D1K5 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 7 10:58:41 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 90) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 274) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 213 212 021 - 4341 + 4 Start_Stop_Count -O--CK 100 100 000 - 11 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 051 051 000 - 36496 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 11 + 16 Unknown_Attribute -O---K 043 000 000 - 2356608721693 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 7 +193 Load_Cycle_Count -O--CK 200 200 000 - 14 +194 Temperature_Celsius -O---K 122 117 000 - 28 (Min/Max 0/33) +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 +241 Total_LBAs_Written -O--CK 198 198 000 - 2148528492140 +242 Total_LBAs_Read -O--CK 200 200 000 - 208080229553 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 1 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xd0 GPL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 11377 - +# 2 Short offline Completed without error 00% 11192 - +# 3 Short offline Completed without error 00% 186 - +# 4 Short offline Completed without error 00% 2 - +# 5 Vendor (0xdf) Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 27/33 Celsius +Lifetime Min/Max Temperature: 0/33 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (386) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 85 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 86 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 98007155 Vendor specific + diff --git a/HDD/WDC/WD2000/WD2000FYYX/C7149C7B4A16 b/HDD/WDC/WD2000/WD2000FYYX/C7149C7B4A16 new file mode 100644 index 000000000..698736bba --- /dev/null +++ b/HDD/WDC/WD2000/WD2000FYYX/C7149C7B4A16 @@ -0,0 +1,190 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WD2000FYYX +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Add. Product Id: DELL(tm) +Firmware Version: 00.0D1K5 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 7 10:58:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 90) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 273) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 213 211 021 - 4341 + 4 Start_Stop_Count -O--CK 100 100 000 - 16 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 050 050 000 - 36894 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 + 16 Unknown_Attribute -O---K 157 000 000 - 8463818717575 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 7 +193 Load_Cycle_Count -O--CK 200 200 000 - 13 +194 Temperature_Celsius -O---K 119 113 000 - 31 (Min/Max 0/37) +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 +241 Total_LBAs_Written -O--CK 192 192 000 - 8447299958581 +242 Total_LBAs_Read -O--CK 200 200 000 - 16518758994 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 1 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xd0 GPL VS 1 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 10587 - +# 2 Short offline Completed without error 00% 10402 - +# 3 Short offline Completed without error 00% 9008 - +# 4 Short offline Completed without error 00% 186 - +# 5 Short offline Completed without error 00% 2 - +# 6 Vendor (0xdf) Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 25/37 Celsius +Lifetime Min/Max Temperature: 0/37 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (86) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 69 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 70 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 98006539 Vendor specific + + + diff --git a/HDD/WDC/WD2000/WD2000FYYZ-01UL1B1/094383D630BE b/HDD/WDC/WD2000/WD2000FYYZ-01UL1B1/094383D630BE new file mode 100644 index 000000000..3a5677288 --- /dev/null +++ b/HDD/WDC/WD2000/WD2000FYYZ-01UL1B1/094383D630BE @@ -0,0 +1,120 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Re +Device Model: WDC WD2000FYYZ-01UL1B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01K02 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 22 11:33:22 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (25620) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 279) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 180 174 021 Pre-fail Always - 5991 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 44 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 032 032 000 Old_age Always - 50089 + 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 11 +193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 119 +194 Temperature_Celsius 0x0022 112 101 000 Old_age Always - 38 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 49019 - +# 2 Extended offline Completed without error 00% 43604 - +# 3 Extended offline Completed without error 00% 43587 - +# 4 Extended offline Completed without error 00% 42998 - +# 5 Extended offline Completed without error 00% 42981 - +# 6 Extended offline Completed without error 00% 39537 - +# 7 Extended offline Completed without error 00% 39520 - +# 8 Extended offline Completed without error 00% 38768 - +# 9 Extended offline Completed without error 00% 38751 - +#10 Extended offline Completed without error 00% 37167 - +#11 Extended offline Completed without error 00% 37150 - +#12 Extended offline Completed without error 00% 35308 - +#13 Extended offline Completed without error 00% 35291 - +#14 Extended offline Completed without error 00% 32878 - +#15 Extended offline Completed without error 00% 32861 - +#16 Extended offline Completed without error 00% 29956 - +#17 Extended offline Completed without error 00% 29939 - +#18 Extended offline Completed without error 00% 18904 - +#19 Extended offline Completed without error 00% 18888 - +#20 Extended offline Completed without error 00% 18867 - +#21 Short offline Completed without error 00% 18862 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD2000/WD2000FYYZ-01UL1B1/157885FEC56B b/HDD/WDC/WD2000/WD2000FYYZ-01UL1B1/157885FEC56B new file mode 100644 index 000000000..18c8e5e58 --- /dev/null +++ b/HDD/WDC/WD2000/WD2000FYYZ-01UL1B1/157885FEC56B @@ -0,0 +1,194 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Re +Device Model: WDC WD2000FYYZ-01UL1B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01K02 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 27 08:23:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x85) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (25440) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 277) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 184 174 021 - 5791 + 4 Start_Stop_Count -O--CK 100 100 000 - 20 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 025 025 000 - 55253 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 20 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 9 +193 Load_Cycle_Count -O--CK 200 200 000 - 89 +194 Temperature_Celsius -O---K 118 107 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 1 Current Device Internal Status Data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 55247 - +# 2 Short offline Completed without error 00% 55223 - +# 3 Short offline Completed without error 00% 55199 - +# 4 Short offline Completed without error 00% 55175 - +# 5 Short offline Completed without error 00% 55151 - +# 6 Extended offline Completed without error 00% 55134 - +# 7 Short offline Completed without error 00% 55127 - +# 8 Short offline Completed without error 00% 55103 - +# 9 Short offline Completed without error 00% 55079 - +#10 Short offline Completed without error 00% 55055 - +#11 Short offline Completed without error 00% 55031 - +#12 Short offline Completed without error 00% 55007 - +#13 Short offline Completed without error 00% 54983 - +#14 Extended offline Completed without error 00% 54967 - +#15 Short offline Completed without error 00% 54959 - +#16 Short offline Completed without error 00% 54935 - +#17 Short offline Completed without error 00% 54911 - +#18 Short offline Completed without error 00% 54887 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 28/43 Celsius +Lifetime Min/Max Temperature: 21/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (200) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 74 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 75 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 28292331 Vendor specific + + + diff --git a/HDD/WDC/WD2000/WD2000FYYZ-01UL1B1/B6967C63AF15 b/HDD/WDC/WD2000/WD2000FYYZ-01UL1B1/B6967C63AF15 new file mode 100644 index 000000000..0416d739e --- /dev/null +++ b/HDD/WDC/WD2000/WD2000FYYZ-01UL1B1/B6967C63AF15 @@ -0,0 +1,225 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Re +Device Model: WDC WD2000FYYZ-01UL1B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01K02 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 27 08:23:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x85) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (25440) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 277) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 181 173 021 - 5941 + 4 Start_Stop_Count -O--CK 100 100 000 - 20 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 025 025 000 - 55254 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 20 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 9 +193 Load_Cycle_Count -O--CK 200 200 000 - 90 +194 Temperature_Celsius -O---K 120 109 000 - 30 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 1 Current Device Internal Status Data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 25077 hours (1044 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 67 53 e3 20 40 00 Error: UNC at LBA = 0x6753e320 = 1733550880 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 60 00 00 67 53 e3 20 40 08 10d+12:02:44.388 READ FPDMA QUEUED + 60 00 18 00 58 00 00 67 53 e3 08 40 08 10d+12:02:44.388 READ FPDMA QUEUED + 60 00 90 00 50 00 00 67 53 e2 20 40 08 10d+12:02:44.388 READ FPDMA QUEUED + 60 00 80 00 48 00 00 67 53 e1 a0 40 08 10d+12:02:44.387 READ FPDMA QUEUED + 60 00 40 00 40 00 00 67 53 e1 60 40 08 10d+12:02:44.387 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 55248 - +# 2 Short offline Completed without error 00% 55224 - +# 3 Short offline Completed without error 00% 55200 - +# 4 Short offline Completed without error 00% 55176 - +# 5 Short offline Completed without error 00% 55152 - +# 6 Extended offline Completed without error 00% 55135 - +# 7 Short offline Completed without error 00% 55128 - +# 8 Short offline Completed without error 00% 55104 - +# 9 Short offline Completed without error 00% 55080 - +#10 Short offline Completed without error 00% 55056 - +#11 Short offline Completed without error 00% 55032 - +#12 Short offline Completed without error 00% 55008 - +#13 Short offline Completed without error 00% 54984 - +#14 Extended offline Completed without error 00% 54968 - +#15 Short offline Completed without error 00% 54960 - +#16 Short offline Completed without error 00% 54936 - +#17 Short offline Completed without error 00% 54912 - +#18 Short offline Completed without error 00% 54888 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 28/41 Celsius +Lifetime Min/Max Temperature: 21/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (226) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 75 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 75 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 28292543 Vendor specific + + + diff --git a/HDD/WDC/WD2001/WD2001FASS-00U0B0/0A62A4BB2BEA b/HDD/WDC/WD2001/WD2001FASS-00U0B0/0A62A4BB2BEA new file mode 100644 index 000000000..eff5c1700 --- /dev/null +++ b/HDD/WDC/WD2001/WD2001FASS-00U0B0/0A62A4BB2BEA @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD2001FASS-00U0B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.00101 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Oct 29 12:02:30 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (31800) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 363) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 052 040 021 - 14408 + 4 Start_Stop_Count -O--CK 100 100 000 - 88 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 87884 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 86 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 72 +193 Load_Cycle_Count -O--CK 107 107 000 - 280827 +194 Temperature_Celsius -O---K 108 086 000 - 44 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Unknown (8) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 43/51 Celsius +Lifetime Min/Max Temperature: ?/65 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (410) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 20460052 Vendor specific + + + diff --git a/HDD/WDC/WD2001/WD2001FASS-00U0B0/C714A4414E3B b/HDD/WDC/WD2001/WD2001FASS-00U0B0/C714A4414E3B new file mode 100644 index 000000000..9a5696c96 --- /dev/null +++ b/HDD/WDC/WD2001/WD2001FASS-00U0B0/C714A4414E3B @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD2001FASS-00U0B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.00101 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Oct 29 12:02:30 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (31680) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 362) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 14 + 3 Spin_Up_Time POS--K 040 040 021 - 15000 + 4 Start_Stop_Count -O--CK 100 100 000 - 101 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 10 + 9 Power_On_Hours -O--CK 001 001 000 - 89942 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 100 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 83 +193 Load_Cycle_Count -O--CK 105 105 000 - 285129 +194 Temperature_Celsius -O---K 107 100 000 - 45 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 3 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 43/52 Celsius +Lifetime Min/Max Temperature: 43/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (182) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 20459702 Vendor specific + + + diff --git a/HDD/WDC/WD2001/WD2001FASS-00W2B0/8C830FDFE762 b/HDD/WDC/WD2001/WD2001FASS-00W2B0/8C830FDFE762 new file mode 100644 index 000000000..941c611ff --- /dev/null +++ b/HDD/WDC/WD2001/WD2001FASS-00W2B0/8C830FDFE762 @@ -0,0 +1,315 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD2001FASS-00W2B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.00101 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Oct 29 12:02:30 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (30180) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 307) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 199 199 051 - 82651 + 3 Spin_Up_Time POS--K 192 148 021 - 12358 + 4 Start_Stop_Count -O--CK 100 100 000 - 84 + 5 Reallocated_Sector_Ct PO--CK 176 176 140 - 191 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 013 011 000 - 64081 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 82 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 67 +193 Load_Cycle_Count -O--CK 124 124 000 - 229614 +194 Temperature_Celsius -O---K 108 101 000 - 44 +196 Reallocated_Event_Count -O--CK 013 013 000 - 187 +197 Current_Pending_Sector -O--CK 200 197 000 - 4 +198 Offline_Uncorrectable ----CK 200 199 000 - 5 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 191 000 - 19 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 39265 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 39265 [0] occurred at disk power-on lifetime: 64575 hours (2690 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 75 cd 0c 5b 40 00 Error: UNC at LBA = 0x75cd0c5b = 1976372315 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 58 00 10 00 00 75 cd 0f 20 40 08 8d+19:37:51.274 READ FPDMA QUEUED + 60 00 e8 00 08 00 00 75 cd 0e 38 40 08 8d+19:37:51.274 READ FPDMA QUEUED + 60 01 00 00 00 00 00 75 cd 0d 38 40 08 8d+19:37:51.274 READ FPDMA QUEUED + 60 01 00 00 f8 00 00 75 cd 0c 38 40 08 8d+19:37:51.274 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 8d+19:37:50.891 READ LOG EXT + +Error 39264 [23] occurred at disk power-on lifetime: 64575 hours (2690 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 75 cd 0c 5b 40 00 Error: UNC at LBA = 0x75cd0c5b = 1976372315 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 58 00 e8 00 00 75 cd 0f 20 40 08 8d+19:37:49.001 READ FPDMA QUEUED + 60 00 e8 00 e0 00 00 75 cd 0e 38 40 08 8d+19:37:49.001 READ FPDMA QUEUED + 60 01 00 00 d8 00 00 75 cd 0d 38 40 08 8d+19:37:49.001 READ FPDMA QUEUED + 60 01 00 00 d0 00 00 75 cd 0c 38 40 08 8d+19:37:49.001 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 8d+19:37:48.619 READ LOG EXT + +Error 39263 [22] occurred at disk power-on lifetime: 64575 hours (2690 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 75 cd 0c 5b 40 00 Error: UNC at LBA = 0x75cd0c5b = 1976372315 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 58 00 c0 00 00 75 cd 0f 20 40 08 8d+19:37:46.712 READ FPDMA QUEUED + 60 00 e8 00 b8 00 00 75 cd 0e 38 40 08 8d+19:37:46.711 READ FPDMA QUEUED + 60 01 00 00 b0 00 00 75 cd 0d 38 40 08 8d+19:37:46.711 READ FPDMA QUEUED + 60 01 00 00 a8 00 00 75 cd 0c 38 40 08 8d+19:37:46.711 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 8d+19:37:46.329 READ LOG EXT + +Error 39262 [21] occurred at disk power-on lifetime: 64575 hours (2690 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 75 cd 0c 5b 40 00 Error: UNC at LBA = 0x75cd0c5b = 1976372315 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 58 00 98 00 00 75 cd 0f 20 40 08 8d+19:37:44.431 READ FPDMA QUEUED + 60 00 e8 00 90 00 00 75 cd 0e 38 40 08 8d+19:37:44.431 READ FPDMA QUEUED + 60 01 00 00 88 00 00 75 cd 0d 38 40 08 8d+19:37:44.430 READ FPDMA QUEUED + 60 01 00 00 80 00 00 75 cd 0c 38 40 08 8d+19:37:44.430 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 8d+19:37:44.048 READ LOG EXT + +Error 39261 [20] occurred at disk power-on lifetime: 64575 hours (2690 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 75 cd 0c 5b 40 00 Error: UNC at LBA = 0x75cd0c5b = 1976372315 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 58 00 70 00 00 75 cd 0f 20 40 08 8d+19:37:42.158 READ FPDMA QUEUED + 60 00 e8 00 68 00 00 75 cd 0e 38 40 08 8d+19:37:42.156 READ FPDMA QUEUED + 60 01 00 00 60 00 00 75 cd 0d 38 40 08 8d+19:37:42.156 READ FPDMA QUEUED + 60 01 00 00 58 00 00 75 cd 0c 38 40 08 8d+19:37:42.155 READ FPDMA QUEUED + 60 01 00 00 50 00 00 75 cd 0b 38 40 08 8d+19:37:42.155 READ FPDMA QUEUED + +Error 39260 [19] occurred at disk power-on lifetime: 63736 hours (2655 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 75 cd 0c 5b 40 00 Error: UNC at LBA = 0x75cd0c5b = 1976372315 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 e8 00 58 00 00 75 cd 18 d8 40 08 23d+14:19:05.706 READ FPDMA QUEUED + 60 01 00 00 50 00 00 75 cd 17 d8 40 08 23d+14:19:05.706 READ FPDMA QUEUED + 60 01 00 00 48 00 00 75 cd 16 d8 40 08 23d+14:19:05.705 READ FPDMA QUEUED + 60 01 00 00 40 00 00 75 cd 15 d8 40 08 23d+14:19:05.705 READ FPDMA QUEUED + 60 01 00 00 38 00 00 75 cd 14 d8 40 08 23d+14:19:05.705 READ FPDMA QUEUED + +Error 39259 [18] occurred at disk power-on lifetime: 63736 hours (2655 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 75 cd 0c 5b 40 00 Error: UNC at LBA = 0x75cd0c5b = 1976372315 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 e8 00 e0 00 00 75 cd 18 d8 40 08 23d+14:19:03.432 READ FPDMA QUEUED + 60 01 00 00 d8 00 00 75 cd 17 d8 40 08 23d+14:19:03.432 READ FPDMA QUEUED + 60 01 00 00 d0 00 00 75 cd 16 d8 40 08 23d+14:19:03.432 READ FPDMA QUEUED + 60 01 00 00 c8 00 00 75 cd 15 d8 40 08 23d+14:19:03.432 READ FPDMA QUEUED + 60 01 00 00 c0 00 00 75 cd 14 d8 40 08 23d+14:19:03.432 READ FPDMA QUEUED + +Error 39258 [17] occurred at disk power-on lifetime: 63736 hours (2655 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 01 00 00 00 75 cd 0c 5b 40 00 Error: UNC at LBA = 0x75cd0c5b = 1976372315 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 e8 00 68 00 00 75 cd 18 d8 40 08 23d+14:19:01.159 READ FPDMA QUEUED + 60 01 00 00 60 00 00 75 cd 17 d8 40 08 23d+14:19:01.159 READ FPDMA QUEUED + 60 01 00 00 58 00 00 75 cd 16 d8 40 08 23d+14:19:01.159 READ FPDMA QUEUED + 60 01 00 00 50 00 00 75 cd 15 d8 40 08 23d+14:19:01.159 READ FPDMA QUEUED + 60 01 00 00 48 00 00 75 cd 14 d8 40 08 23d+14:19:01.159 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 41/51 Celsius +Lifetime Min/Max Temperature: 41/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (432) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 20460167 Vendor specific + + + diff --git a/HDD/WDC/WD2002/WD2002FAEX-007BA0/23DCEE8CB8BD b/HDD/WDC/WD2002/WD2002FAEX-007BA0/23DCEE8CB8BD new file mode 100644 index 000000000..58ac1f8a0 --- /dev/null +++ b/HDD/WDC/WD2002/WD2002FAEX-007BA0/23DCEE8CB8BD @@ -0,0 +1,94 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD2002FAEX-007BA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01D05 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 24 18:33:27 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (31860) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 308) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 26 + 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 8225 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 35 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 092 091 000 Old_age Always - 5964 + 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 35 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 32 +193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2 +194 Temperature_Celsius 0x0022 120 107 000 Old_age Always - 32 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD2003/WD2003FYYS-007BA0/DDB49344C69B b/HDD/WDC/WD2003/WD2003FYYS-007BA0/DDB49344C69B new file mode 100644 index 000000000..f695239f9 --- /dev/null +++ b/HDD/WDC/WD2003/WD2003FYYS-007BA0/DDB49344C69B @@ -0,0 +1,129 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital RE4 +Device Model: WDC WD2003FYYS-007BA0 +Serial Number: -- +LU WWN Device Id: d d52000 ... +Firmware Version: 01.02C.7 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +Local Time is: Sun Nov 1 04:49:21 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (32520) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 327) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 4 Start_Stop_Count P-SRCK+ 100 100 000 - 37 +194 Temperature_Celsius POSRCK+ 120 106 000 - 32 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 3919344 Vendor specific + + + diff --git a/HDD/WDC/WD2003/WD2003FZEX-00SRLA0/68E4E3C35F03 b/HDD/WDC/WD2003/WD2003FZEX-00SRLA0/68E4E3C35F03 new file mode 100644 index 000000000..79d74bff5 --- /dev/null +++ b/HDD/WDC/WD2003/WD2003FZEX-00SRLA0/68E4E3C35F03 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black +Device Model: WDC WD2003FZEX-00SRLA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jun 30 16:52:40 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 212) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x203d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0 + 3 Spin_Up_Time POS--K 100 253 021 - 0 + 4 Start_Stop_Count -O--CK 100 100 000 - 1 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 0 +193 Load_Cycle_Count -O--CK 200 200 000 - 1 +194 Temperature_Celsius -O---K 107 107 000 - 40 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 901 Pending Defects log +0x0d GPL,SL R/O 8 LPS Mis-alignment log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 192 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xb6 GPL,SL VS 16 Device vendor specific log +0xb7 GPL,SL VS 39 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 26/40 Celsius +Lifetime Min/Max Temperature: 26/40 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (137) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1 -D- Lifetime Power-On Resets +0x01 0x010 4 2 -D- Power-on Hours +0x01 0x018 6 37149399 -D- Logical Sectors Written +0x01 0x020 6 329439 -D- Number of Write Commands +0x01 0x028 6 15476 -D- Logical Sectors Read +0x01 0x030 6 263 -D- Number of Read Commands +0x01 0x038 6 7200000 -D- Date and Time TimeStamp +0x01 0x048 2 0 ND- Workload Utilization +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 2 -D- Spindle Motor Power-on Hours +0x03 0x010 4 2 -D- Head Flying Hours +0x03 0x018 4 1 -D- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 0 -D- Read Recovery Attempts +0x03 0x030 4 0 -D- Number of Mechanical Start Failures +0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 0 -D- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 -D- Current Temperature +0x05 0x010 1 - -D- Average Short Term Temperature +0x05 0x018 1 - -D- Average Long Term Temperature +0x05 0x020 1 40 -D- Highest Temperature +0x05 0x028 1 30 -D- Lowest Temperature +0x05 0x030 1 - -D- Highest Average Short Term Temperature +0x05 0x038 1 - -D- Lowest Average Short Term Temperature +0x05 0x040 1 - -D- Highest Average Long Term Temperature +0x05 0x048 1 - -D- Lowest Average Long Term Temperature +0x05 0x050 4 0 -D- Time in Over-Temperature +0x05 0x058 1 60 -D- Specified Maximum Operating Temperature +0x05 0x060 4 0 -D- Time in Under-Temperature +0x05 0x068 1 0 -D- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4 -D- Number of Hardware Resets +0x06 0x010 4 4 -D- Number of ASR Events +0x06 0x018 4 0 -D- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 0 Vendor specific + + + diff --git a/HDD/WDC/WD2004/WD2004FBYZ-01YCBB1/505BF1432E94 b/HDD/WDC/WD2004/WD2004FBYZ-01YCBB1/505BF1432E94 new file mode 100644 index 000000000..98dbb64b0 --- /dev/null +++ b/HDD/WDC/WD2004/WD2004FBYZ-01YCBB1/505BF1432E94 @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Re +Device Model: WDC WD2004FBYZ-01YCBB1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: RR04 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 07:19:26 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 220) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 189 179 021 - 3550 + 4 Start_Stop_Count -O--CK 083 083 000 - 17363 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 200 000 - 0 + 9 Power_On_Hours -O--CK 062 062 000 - 27802 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 247 + 16 Total_LBAs_Read -O---K 000 200 000 - 26337445121 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 42 +193 Load_Cycle_Count -O--CK 189 189 000 - 35001 +194 Temperature_Celsius -O---K 117 102 000 - 30 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x0c GPL R/O 113 Pending Defects log +0x0d GPL,SL R/O 8 LPS Mis-alignment log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 189 Current Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xb6 GPL,SL VS 16 Device vendor specific log +0xb7 GPL,SL VS 39 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 23/30 Celsius +Lifetime Min/Max Temperature: 10/45 Celsius +Specified Max Operating Temperature: 60 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (260) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 247 -D- Lifetime Power-On Resets +0x01 0x010 4 27802 -D- Power-on Hours +0x01 0x018 6 12555644396 -D- Logical Sectors Written +0x01 0x020 6 188132682 -D- Number of Write Commands +0x01 0x028 6 13781800725 -D- Logical Sectors Read +0x01 0x030 6 223683479 -D- Number of Read Commands +0x01 0x038 6 1302952192 -D- Date and Time TimeStamp +0x01 0x048 2 49 ND- Workload Utilization +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 21214 -D- Spindle Motor Power-on Hours +0x03 0x010 4 16337 -D- Head Flying Hours +0x03 0x018 4 35044 -D- Head Load Events +0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors +0x03 0x028 4 0 -D- Read Recovery Attempts +0x03 0x030 4 0 -D- Number of Mechanical Start Failures +0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 42 -D- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 -D- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 -D- Current Temperature +0x05 0x010 1 34 -D- Average Short Term Temperature +0x05 0x018 1 33 -D- Average Long Term Temperature +0x05 0x020 1 46 -D- Highest Temperature +0x05 0x028 1 15 -D- Lowest Temperature +0x05 0x030 1 41 -D- Highest Average Short Term Temperature +0x05 0x038 1 24 -D- Lowest Average Short Term Temperature +0x05 0x040 1 39 -D- Highest Average Long Term Temperature +0x05 0x048 1 32 -D- Lowest Average Long Term Temperature +0x05 0x050 4 0 -D- Time in Over-Temperature +0x05 0x058 1 60 -D- Specified Maximum Operating Temperature +0x05 0x060 4 0 -D- Time in Under-Temperature +0x05 0x068 1 0 -D- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 18063 -D- Number of Hardware Resets +0x06 0x010 4 728 -D- Number of ASR Events +0x06 0x018 4 0 -D- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 0 Vendor specific + diff --git a/HDD/WDC/WD2500/WD2500AAJS-08L7A0/D6398619C884 b/HDD/WDC/WD2500/WD2500AAJS-08L7A0/D6398619C884 new file mode 100644 index 000000000..fdb04a557 --- /dev/null +++ b/HDD/WDC/WD2500/WD2500AAJS-08L7A0/D6398619C884 @@ -0,0 +1,160 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Blue Serial ATA +Device Model: WDC WD2500AAJS-08L7A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 03.03E03 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Thu Oct 29 13:59:42 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5580) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 68) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 137 136 021 - 4108 + 4 Start_Stop_Count -O--CK 100 100 000 - 632 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 021 021 000 - 57943 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 630 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 133 +193 Load_Cycle_Count -O--CK 200 200 000 - 632 +194 Temperature_Celsius -O---K 098 090 000 - 45 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0x50) Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 38/48 Celsius +Lifetime Min/Max Temperature: 40/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (66) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x8000 4 1377024 Vendor specific + diff --git a/HDD/WDC/WD2500/WD2500AAKX-07U6AA0/2BB5194937DE b/HDD/WDC/WD2500/WD2500AAKX-07U6AA0/2BB5194937DE new file mode 100644 index 000000000..5a9e5a538 --- /dev/null +++ b/HDD/WDC/WD2500/WD2500AAKX-07U6AA0/2BB5194937DE @@ -0,0 +1,164 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RC3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD2500AAKX-07U6AA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 17.01H17 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:36:45 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4080) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 44) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 141 140 021 - 3916 + 4 Start_Stop_Count -O--CK 099 099 000 - 1954 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 058 058 000 - 30952 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1932 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 92 +193 Load_Cycle_Count -O--CK 200 200 000 - 1865 +194 Temperature_Celsius -O---K 111 099 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 30/33 Celsius +Lifetime Min/Max Temperature: 0/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (459) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 81858 Vendor specific + + + diff --git a/HDD/WDC/WD2500/WD2500AAKX-19U6AA0/9811EEF1F2B8 b/HDD/WDC/WD2500/WD2500AAKX-19U6AA0/9811EEF1F2B8 new file mode 100644 index 000000000..bc08138de --- /dev/null +++ b/HDD/WDC/WD2500/WD2500AAKX-19U6AA0/9811EEF1F2B8 @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD2500AAKX-19U6AA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 15.01H15 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Oct 28 22:13:59 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4380) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 47) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 151 142 021 - 3425 + 4 Start_Stop_Count -O--CK 099 099 000 - 1317 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 080 080 000 - 14729 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 824 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 89 +193 Load_Cycle_Count -O--CK 200 200 000 - 1228 +194 Temperature_Celsius -O---K 108 087 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 7326 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 30/35 Celsius +Lifetime Min/Max Temperature: 0/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (116) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 1236638 Vendor specific + + + diff --git a/HDD/WDC/WD2500/WD2500BEVS-08VAT2/37CA64F7341B b/HDD/WDC/WD2500/WD2500BEVS-08VAT2/37CA64F7341B new file mode 100644 index 000000000..41408f049 --- /dev/null +++ b/HDD/WDC/WD2500/WD2500BEVS-08VAT2/37CA64F7341B @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Blue Serial ATA +Device Model: WDC WD2500BEVS-08VAT2 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 14.01A14 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 1.5 Gb/s +Local Time is: Sun Jul 19 19:05:37 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8100) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 96) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 193 186 021 - 1333 + 4 Start_Stop_Count -O--CK 098 098 000 - 2386 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate POSR-K 200 200 051 - 0 + 9 Power_On_Hours -O--CK 082 082 000 - 13759 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2290 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 51 +193 Load_Cycle_Count -O--CK 001 001 000 - 1002444 +194 Temperature_Celsius -O---K 102 094 000 - 45 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 +240 Head_Flying_Hours -O--CK 085 085 000 - 11509 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 27/47 Celsius +Lifetime Min/Max Temperature: ?/57 Celsius +Specified Max Operating Temperature: 31 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 1/85 Celsius +Temperature History Size (Index): 128 (20) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x8000 4 33665 Vendor specific + diff --git a/HDD/WDC/WD2500/WD2500BEVT-22A23T0/D07E94D50913 b/HDD/WDC/WD2500/WD2500BEVT-22A23T0/D07E94D50913 new file mode 100644 index 000000000..46c69fba0 --- /dev/null +++ b/HDD/WDC/WD2500/WD2500BEVT-22A23T0/D07E94D50913 @@ -0,0 +1,94 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Blue Serial ATA +Device Model: WDC WD2500BEVT-22A23T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Oct 30 19:25:32 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 79) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 155 133 021 Pre-fail Always - 1225 + 4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4293 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1198 + 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1751 +191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 1951 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 32 +193 Load_Cycle_Count 0x0032 180 180 000 Old_age Always - 60416 +194 Temperature_Celsius 0x0022 117 095 000 Old_age Always - 26 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD2500/WD2500BEVT-60A23T0/4A8D6014CA7D b/HDD/WDC/WD2500/WD2500BEVT-60A23T0/4A8D6014CA7D new file mode 100644 index 000000000..22e808eb1 --- /dev/null +++ b/HDD/WDC/WD2500/WD2500BEVT-60A23T0/4A8D6014CA7D @@ -0,0 +1,324 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Blue Serial ATA +Device Model: WDC WD2500BEVT-60A23T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 02.01A02 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sat Jul 4 19:43:12 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6660) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 69) minutes. +SCT capabilities: (0x703f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 + 3 Spin_Up_Time POS--K 154 144 021 - 1258 + 4 Start_Stop_Count -O--CK 098 098 000 - 2769 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate POSR-K 200 200 051 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 6005 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2310 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 082 000 - 37 +188 Command_Timeout -O--CK 100 084 000 - 133146607657 +190 Airflow_Temperature_Cel -O---K 052 046 040 - 48 (Min/Max 25/48) +191 G-Sense_Error_Rate -O--CK 001 001 000 - 1816 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 288 +193 Load_Cycle_Count -O--CK 121 121 000 - 239687 +194 Temperature_Celsius -O---K 095 089 000 - 48 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 48 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 48 [23] occurred at disk power-on lifetime: 5126 hours (213 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 f7 df 38 47 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:28:49.608 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:28:41.113 FLUSH CACHE EXT + 61 00 08 00 50 00 00 10 09 20 88 40 08 1d+11:28:41.103 WRITE FPDMA QUEUED + 61 00 08 00 48 00 00 10 09 20 70 40 08 1d+11:28:41.102 WRITE FPDMA QUEUED + 61 00 18 00 40 00 00 11 dc 1c 98 40 08 1d+11:28:41.102 WRITE FPDMA QUEUED + +Error 47 [22] occurred at disk power-on lifetime: 5126 hours (213 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 f7 df 38 47 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:28:41.113 FLUSH CACHE EXT + 61 00 08 00 50 00 00 10 09 20 88 40 08 1d+11:28:41.103 WRITE FPDMA QUEUED + 61 00 08 00 48 00 00 10 09 20 70 40 08 1d+11:28:41.102 WRITE FPDMA QUEUED + 61 00 18 00 40 00 00 11 dc 1c 98 40 08 1d+11:28:41.102 WRITE FPDMA QUEUED + 61 00 08 00 38 00 00 11 dc 1c 60 40 08 1d+11:28:41.102 WRITE FPDMA QUEUED + +Error 46 [21] occurred at disk power-on lifetime: 5126 hours (213 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 f7 df 38 47 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:25:36.488 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:25:27.994 FLUSH CACHE EXT + 61 00 08 00 90 00 00 10 09 16 10 40 08 1d+11:25:27.984 WRITE FPDMA QUEUED + 61 00 08 00 88 00 00 10 09 15 f8 40 08 1d+11:25:27.984 WRITE FPDMA QUEUED + 61 00 08 00 80 00 00 11 dc 06 f8 40 08 1d+11:25:27.984 WRITE FPDMA QUEUED + +Error 45 [20] occurred at disk power-on lifetime: 5126 hours (213 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 f7 df 38 47 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:25:27.994 FLUSH CACHE EXT + 61 00 08 00 90 00 00 10 09 16 10 40 08 1d+11:25:27.984 WRITE FPDMA QUEUED + 61 00 08 00 88 00 00 10 09 15 f8 40 08 1d+11:25:27.984 WRITE FPDMA QUEUED + 61 00 08 00 80 00 00 11 dc 06 f8 40 08 1d+11:25:27.984 WRITE FPDMA QUEUED + 61 00 08 00 78 00 00 11 dc 06 e8 40 08 1d+11:25:27.983 WRITE FPDMA QUEUED + +Error 44 [19] occurred at disk power-on lifetime: 5126 hours (213 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 f7 df 38 47 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:24:14.276 FLUSH CACHE EXT + 61 00 08 00 48 00 00 10 5e 64 08 40 08 1d+11:24:14.267 WRITE FPDMA QUEUED + 61 00 08 00 40 00 00 10 3c 68 68 40 08 1d+11:24:14.267 WRITE FPDMA QUEUED + 61 00 08 00 38 00 00 10 09 12 48 40 08 1d+11:24:14.267 WRITE FPDMA QUEUED + 61 00 08 00 30 00 00 10 09 12 30 40 08 1d+11:24:14.267 WRITE FPDMA QUEUED + +Error 43 [18] occurred at disk power-on lifetime: 5126 hours (213 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 f7 df 38 47 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:23:44.836 FLUSH CACHE EXT + 61 00 10 00 78 00 00 11 5d 0f a8 40 08 1d+11:23:44.835 WRITE FPDMA QUEUED + 61 00 08 00 70 00 00 11 5d 0f 98 40 08 1d+11:23:44.835 WRITE FPDMA QUEUED + 61 00 10 00 68 00 00 11 09 a7 60 40 08 1d+11:23:44.835 WRITE FPDMA QUEUED + 61 00 08 00 60 00 00 11 09 a7 40 40 08 1d+11:23:44.835 WRITE FPDMA QUEUED + +Error 42 [17] occurred at disk power-on lifetime: 5126 hours (213 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 f7 df 38 47 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:21:56.608 FLUSH CACHE EXT + 61 00 80 00 68 00 00 11 b1 14 28 40 08 1d+11:21:56.608 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:21:48.113 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:21:39.618 FLUSH CACHE EXT + 61 00 08 00 50 00 00 10 09 0b 50 40 08 1d+11:21:39.618 WRITE FPDMA QUEUED + +Error 41 [16] occurred at disk power-on lifetime: 5126 hours (213 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 f7 df 38 47 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:21:48.113 FLUSH CACHE EXT + ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+11:21:39.618 FLUSH CACHE EXT + 61 00 08 00 50 00 00 10 09 0b 50 40 08 1d+11:21:39.618 WRITE FPDMA QUEUED + 61 00 08 00 48 00 00 11 db f0 58 40 08 1d+11:21:39.618 WRITE FPDMA QUEUED + 61 00 08 00 40 00 00 11 db f0 48 40 08 1d+11:21:39.617 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5943 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 25/51 Celsius +Lifetime Min/Max Temperature: ?/55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (44) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 31154 Vendor specific + + + diff --git a/HDD/WDC/WD2500/WD2500HHTZ-04N21V1/0C2A0A235525 b/HDD/WDC/WD2500/WD2500HHTZ-04N21V1/0C2A0A235525 new file mode 100644 index 000000000..11b35ef91 --- /dev/null +++ b/HDD/WDC/WD2500/WD2500HHTZ-04N21V1/0C2A0A235525 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital VelociRaptor (AF) +Device Model: WDC WD2500HHTZ-04N21V1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 04.06A01 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 10000 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 26 11:31:51 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2400) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 31) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x30bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 171 170 021 - 2450 + 4 Start_Stop_Count -O--CK 100 100 000 - 372 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 098 098 000 - 1778 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 369 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 50 +193 Load_Cycle_Count -O--CK 200 200 000 - 321 +194 Temperature_Celsius -O---K 117 106 000 - 30 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 25/30 Celsius +Lifetime Min/Max Temperature: 16/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (398) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 901 Vendor specific + + + diff --git a/HDD/WDC/WD2500/WD2500JS-75NCB2/32F29549F000 b/HDD/WDC/WD2500/WD2500JS-75NCB2/32F29549F000 new file mode 100644 index 000000000..152bfcfce --- /dev/null +++ b/HDD/WDC/WD2500/WD2500JS-75NCB2/32F29549F000 @@ -0,0 +1,94 @@ +smartctl 7.1 2019-12-30 r5022 [DragonFly 5.8-RELEASE x86_64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar SE Serial ATA +Device Model: WDC WD2500JS-75NCB2 +Serial Number: -- +Firmware Version: 10.02E03 +User Capacity: 250,000,000,000 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Wed Sep 16 06:41:37 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7680) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 90) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0003 196 184 021 Pre-fail Always - 5158 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 902 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21335 + 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 + 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 901 +190 Airflow_Temperature_Cel 0x0022 049 039 045 Old_age Always In_the_past 51 +194 Temperature_Celsius 0x0022 099 089 000 Old_age Always - 51 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD2500/WD2500JS-75NCB2/3935B0087277 b/HDD/WDC/WD2500/WD2500JS-75NCB2/3935B0087277 new file mode 100644 index 000000000..b79ee600f --- /dev/null +++ b/HDD/WDC/WD2500/WD2500JS-75NCB2/3935B0087277 @@ -0,0 +1,97 @@ +smartctl 7.1 2019-12-30 r5022 [DragonFly 5.8-RELEASE x86_64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar SE Serial ATA +Device Model: WDC WD2500JS-75NCB2 +Serial Number: -- +Firmware Version: 10.02E03 +User Capacity: 250,000,000,000 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Wed Sep 16 06:41:36 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7080) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 83) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0003 195 179 021 Pre-fail Always - 5241 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 902 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21344 + 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 + 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 901 +190 Airflow_Temperature_Cel 0x0022 052 043 045 Old_age Always In_the_past 48 +194 Temperature_Celsius 0x0022 102 093 000 Old_age Always - 48 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short captive Interrupted (host reset) 50% 14041 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/HDD/WDC/WD2500/WD2500KS-00MJB0/5B42832806C0 b/HDD/WDC/WD2500/WD2500KS-00MJB0/5B42832806C0 new file mode 100644 index 000000000..bcb848d0d --- /dev/null +++ b/HDD/WDC/WD2500/WD2500KS-00MJB0/5B42832806C0 @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar SE16 Serial ATA +Device Model: WDC WD2500KS-00MJB0 +Serial Number: -- +Firmware Version: 02.01C03 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Fri Oct 30 14:24:07 2020 NDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 7080) seconds. +Offline data collection +capabilities: (0xc8) No SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + No Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0xc8c8) Does not save SMART data before + entering power-saving mode. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 25600 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE +100 Unknown_Attribute P--RCK+ 001 001 --- - 219043332096 +200 Multi_Zone_Error_Rate ------ 223 000 200 Past 64424513290 +200 Multi_Zone_Error_Rate ------ 100 000 200 NOW 214748365461 + 85 Unknown_Attribute P-SR-K+ 200 000 --- - 81604378624 +100 Unknown_Attribute ------ 200 200 --- - 77309411328 +100 Unknown_Attribute ------ 079 000 --- - 214748380827 +100 Unknown_Attribute P--RCK+ 000 000 --- - 149216559104 + 35 Unknown_Attribute -O-R-K 000 000 --- - 149283667968 + 85 Unknown_Attribute -O-R-K 100 000 --- - 214748365461 +200 Multi_Zone_Error_Rate ------ 045 000 200 NOW 77309411383 +200 Multi_Zone_Error_Rate ------ 095 000 200 NOW 68719476791 +200 Multi_Zone_Error_Rate ------ 200 000 200 NOW 266287972352 +200 Multi_Zone_Error_Rate ------ 200 000 200 NOW 38654705664 +200 Multi_Zone_Error_Rate ------ 000 000 200 NOW 184720134504448 + 1 Raw_Read_Error_Rate PO-RCK+ 200 001 --- - 1921 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 00 01 01 00 53 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 3f b0 1e 86 00 00 00 00 00 5b 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 01 d5 00 e0 1e 3f 00 86 b0 00 5b 00 00:00:57.345 NOP [Reserved subcommand] [OBS-ACS-2] + 00 3a 25 1e 86 00 01 00 00 00 5b 00 12 17d+16:38:47.099 NOP [Reserved subcommand] [OBS-ACS-2] + 00 40 00 00 80 1e 30 10 86 25 00 5b 00 00:00:16.448 NOP [Abort queued commands] + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x48): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 55 Celsius +Power Cycle Min/Max Temperature: --/57 Celsius +Lifetime Min/Max Temperature: --/67 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 13105 minutes +Temperature Logging Interval: 13364 minutes +Min/Max recommended Temperature: 5/65 Celsius +Min/Max Temperature Limit: 1/60 Celsius +Temperature History Size (Index): 13619 (879) +Invalid Temperature History Size or Index + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x8000 4 1528727 Vendor specific + diff --git a/HDD/WDC/WD2500/WD2500LPCX-24C6HT0/CB708D1A20F0 b/HDD/WDC/WD2500/WD2500LPCX-24C6HT0/CB708D1A20F0 new file mode 100644 index 000000000..0125e7a29 --- /dev/null +++ b/HDD/WDC/WD2500/WD2500LPCX-24C6HT0/CB708D1A20F0 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD2500LPCX-24C6HT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 02.01A02 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 4 01:56:48 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4560) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 56) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 153 144 021 - 1350 + 4 Start_Stop_Count -O--CK 034 034 000 - 66899 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate POSR-K 200 200 051 - 0 + 9 Power_On_Hours -O--CK 081 081 000 - 14599 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2885 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 225 +193 Load_Cycle_Count -O--CK 110 110 000 - 270344 +194 Temperature_Celsius -O---K 114 100 000 - 29 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 +240 Head_Flying_Hours -O--CK 082 082 000 - 13831 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 38 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0x50) Completed without error 00% 1150 - +# 2 Short offline Completed without error 00% 1150 - +# 3 Vendor (0x50) Completed without error 00% 65 - +# 4 Short offline Completed without error 00% 65 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Stand-by (1) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 28/29 Celsius +Lifetime Min/Max Temperature: 15/44 Celsius +Specified Max Operating Temperature: 31 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (56) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2156 Vendor specific + diff --git a/HDD/WDC/WD30/WD30EFRX-68AX9N0/0038E5A488C7 b/HDD/WDC/WD30/WD30EFRX-68AX9N0/0038E5A488C7 new file mode 100644 index 000000000..a57549406 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68AX9N0/0038E5A488C7 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 20:11:47 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40980) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 411) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 179 177 021 - 6025 + 4 Start_Stop_Count -O--CK 100 100 000 - 311 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 013 013 000 - 63738 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 310 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 198 +193 Load_Cycle_Count -O--CK 200 200 000 - 112 +194 Temperature_Celsius -O---K 105 087 000 - 45 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 43/48 Celsius +Lifetime Min/Max Temperature: 19/63 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (161) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 818004 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68AX9N0/331C9546971D b/HDD/WDC/WD30/WD30EFRX-68AX9N0/331C9546971D new file mode 100644 index 000000000..ac3e38658 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68AX9N0/331C9546971D @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 20:11:47 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (38460) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 386) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 182 178 021 - 5900 + 4 Start_Stop_Count -O--CK 100 100 000 - 311 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 013 013 000 - 63738 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 310 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 198 +193 Load_Cycle_Count -O--CK 200 200 000 - 112 +194 Temperature_Celsius -O---K 103 087 000 - 47 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 45/50 Celsius +Lifetime Min/Max Temperature: 18/63 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (345) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 818005 Vendor specific + diff --git a/HDD/WDC/WD30/WD30EFRX-68AX9N0/591B3071AECD b/HDD/WDC/WD30/WD30EFRX-68AX9N0/591B3071AECD new file mode 100644 index 000000000..5e1008b06 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68AX9N0/591B3071AECD @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 20:11:47 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (37920) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 380) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 178 177 021 - 6075 + 4 Start_Stop_Count -O--CK 100 100 000 - 301 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 017 017 000 - 61272 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 300 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 195 +193 Load_Cycle_Count -O--CK 200 200 000 - 105 +194 Temperature_Celsius -O---K 104 091 000 - 46 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 196 000 - 15 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 43/49 Celsius +Lifetime Min/Max Temperature: 19/58 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (361) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 818006 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68AX9N0/70E955C3A84C b/HDD/WDC/WD30/WD30EFRX-68AX9N0/70E955C3A84C new file mode 100644 index 000000000..e2d41a79f --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68AX9N0/70E955C3A84C @@ -0,0 +1,192 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 23 21:11:19 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40080) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 402) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 182 182 021 - 5900 + 4 Start_Stop_Count -O--CK 076 076 000 - 24848 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 041 041 000 - 43711 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 079 079 000 - 21850 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 146 +193 Load_Cycle_Count -O--CK 192 192 000 - 24701 +194 Temperature_Celsius -O---K 116 099 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 40969 - +# 2 Short offline Completed without error 00% 40226 - +# 3 Short offline Completed without error 00% 39575 - +# 4 Short offline Completed without error 00% 39167 - +# 5 Short offline Completed without error 00% 38867 - +# 6 Short offline Completed without error 00% 38541 - +# 7 Short offline Completed without error 00% 38179 - +# 8 Short offline Completed without error 00% 37776 - +# 9 Short offline Completed without error 00% 37375 - +#10 Short offline Completed without error 00% 36809 - +#11 Short offline Completed without error 00% 36414 - +#12 Short offline Completed without error 00% 35917 - +#13 Short offline Completed without error 00% 35335 - +#14 Short offline Completed without error 00% 34810 - +#15 Short offline Completed without error 00% 34304 - +#16 Short offline Completed without error 00% 33857 - +#17 Short offline Completed without error 00% 33337 - +#18 Short offline Completed without error 00% 32813 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 21/34 Celsius +Lifetime Min/Max Temperature: 2/51 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (262) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 19690 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68AX9N0/8714E08680FD b/HDD/WDC/WD30/WD30EFRX-68AX9N0/8714E08680FD new file mode 100644 index 000000000..127da0b8a --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68AX9N0/8714E08680FD @@ -0,0 +1,324 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 20:11:47 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40020) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 401) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 183 180 021 - 5808 + 4 Start_Stop_Count -O--CK 100 100 000 - 311 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 013 013 000 - 63738 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 310 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 201 +193 Load_Cycle_Count -O--CK 200 200 000 - 109 +194 Temperature_Celsius -O---K 102 088 000 - 48 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 5362 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1381 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1381 [12] occurred at disk power-on lifetime: 11492 hours (478 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 6e 9e ac 5a 00 00 Error: WP at LBA = 0x6e9eac5a = 1855892570 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 ab 00 68 00 00 e4 36 cc 1a 40 08 16d+22:39:13.703 WRITE FPDMA QUEUED + 60 00 55 00 60 00 00 6e 9e ac 5a 40 08 16d+22:39:13.681 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 16d+22:39:13.633 READ LOG EXT + 61 00 ab 00 60 00 00 e4 36 cc 1a 40 08 16d+22:39:06.700 WRITE FPDMA QUEUED + 60 00 55 00 58 00 00 6e 9e ac 5a 40 08 16d+22:39:06.678 READ FPDMA QUEUED + +Error 1380 [11] occurred at disk power-on lifetime: 11492 hours (478 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 6e 9e ac 5a 00 00 Error: WP at LBA = 0x6e9eac5a = 1855892570 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 ab 00 60 00 00 e4 36 cc 1a 40 08 16d+22:39:06.700 WRITE FPDMA QUEUED + 60 00 55 00 58 00 00 6e 9e ac 5a 40 08 16d+22:39:06.678 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 16d+22:39:06.630 READ LOG EXT + 61 00 ab 00 58 00 00 e4 36 cc 1a 40 08 16d+22:38:59.698 WRITE FPDMA QUEUED + 60 00 55 00 50 00 00 6e 9e ac 5a 40 08 16d+22:38:59.676 READ FPDMA QUEUED + +Error 1379 [10] occurred at disk power-on lifetime: 11492 hours (478 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 6e 9e ac 5a 00 00 Error: WP at LBA = 0x6e9eac5a = 1855892570 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 ab 00 58 00 00 e4 36 cc 1a 40 08 16d+22:38:59.698 WRITE FPDMA QUEUED + 60 00 55 00 50 00 00 6e 9e ac 5a 40 08 16d+22:38:59.676 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 16d+22:38:59.628 READ LOG EXT + 61 00 ab 00 50 00 00 e4 36 cc 1a 40 08 16d+22:38:52.634 WRITE FPDMA QUEUED + 61 00 ab 00 50 00 00 e4 36 cb 6f 40 08 16d+22:38:52.634 WRITE FPDMA QUEUED + +Error 1378 [9] occurred at disk power-on lifetime: 11492 hours (478 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 6e 9e ac 5a 40 00 Error: WP at LBA = 0x6e9eac5a = 1855892570 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 ab 00 50 00 00 e4 36 cc 1a 40 08 16d+22:38:52.634 WRITE FPDMA QUEUED + 61 00 ab 00 50 00 00 e4 36 cb 6f 40 08 16d+22:38:52.634 WRITE FPDMA QUEUED + 61 00 ab 00 50 00 00 e4 36 ca c4 40 08 16d+22:38:52.634 WRITE FPDMA QUEUED + 61 00 ab 00 50 00 00 e4 36 ca 19 40 08 16d+22:38:52.633 WRITE FPDMA QUEUED + 61 00 ab 00 50 00 00 e4 36 c9 6e 40 08 16d+22:38:52.633 WRITE FPDMA QUEUED + +Error 1377 [8] occurred at disk power-on lifetime: 11492 hours (478 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 e4 1b ad 6a 00 00 Error: UNC at LBA = 0xe41bad6a = 3827019114 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 ab 00 10 00 00 e4 1b b5 42 40 08 16d+22:38:12.500 READ FPDMA QUEUED + 60 01 00 00 08 00 00 e4 1b b4 42 40 08 16d+22:38:12.478 READ FPDMA QUEUED + 60 00 ab 00 00 00 00 e4 1b ad 6a 40 08 16d+22:38:12.456 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 16d+22:38:12.408 READ LOG EXT + 60 00 ab 00 f8 00 00 e4 1b b5 42 40 08 16d+22:38:05.498 READ FPDMA QUEUED + +Error 1376 [7] occurred at disk power-on lifetime: 11492 hours (478 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 e4 1b ad 6a 00 00 Error: UNC at LBA = 0xe41bad6a = 3827019114 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 ab 00 f8 00 00 e4 1b b5 42 40 08 16d+22:38:05.498 READ FPDMA QUEUED + 60 01 00 00 f0 00 00 e4 1b b4 42 40 08 16d+22:38:05.476 READ FPDMA QUEUED + 60 00 ab 00 e8 00 00 e4 1b ad 6a 40 08 16d+22:38:05.454 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 16d+22:38:05.406 READ LOG EXT + 60 00 ab 00 e0 00 00 e4 1b b5 42 40 08 16d+22:37:58.496 READ FPDMA QUEUED + +Error 1375 [6] occurred at disk power-on lifetime: 11492 hours (478 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 e4 1b ad 6a 00 00 Error: UNC at LBA = 0xe41bad6a = 3827019114 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 ab 00 e0 00 00 e4 1b b5 42 40 08 16d+22:37:58.496 READ FPDMA QUEUED + 60 01 00 00 d8 00 00 e4 1b b4 42 40 08 16d+22:37:58.474 READ FPDMA QUEUED + 60 00 ab 00 d0 00 00 e4 1b ad 6a 40 08 16d+22:37:58.452 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 16d+22:37:58.404 READ LOG EXT + 61 00 06 00 d0 00 00 6e 1c 42 3d 40 08 16d+22:37:51.411 WRITE FPDMA QUEUED + +Error 1374 [5] occurred at disk power-on lifetime: 11492 hours (478 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 e4 1b ad 6a 40 00 Error: WP at LBA = 0xe41bad6a = 3827019114 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 06 00 d0 00 00 6e 1c 42 3d 40 08 16d+22:37:51.411 WRITE FPDMA QUEUED + 61 00 51 00 d0 00 01 4a 79 f3 4c 40 08 16d+22:37:51.410 WRITE FPDMA QUEUED + 61 00 02 00 d0 00 01 4a 79 f3 47 40 08 16d+22:37:51.410 WRITE FPDMA QUEUED + 61 00 36 00 d0 00 00 e4 36 08 49 40 08 16d+22:37:51.410 WRITE FPDMA QUEUED + 61 00 0b 00 d0 00 00 e4 0f 5a f5 40 08 16d+22:37:51.410 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 45/52 Celsius +Lifetime Min/Max Temperature: 19/62 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (114) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 818005 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68AX9N0/9CA8999C5C88 b/HDD/WDC/WD30/WD30EFRX-68AX9N0/9CA8999C5C88 new file mode 100644 index 000000000..c2d1ea454 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68AX9N0/9CA8999C5C88 @@ -0,0 +1,192 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 23 21:11:19 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (39060) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 392) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 178 177 021 - 6100 + 4 Start_Stop_Count -O--CK 076 076 000 - 24851 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 041 041 000 - 43728 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 079 079 000 - 21855 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 147 +193 Load_Cycle_Count -O--CK 192 192 000 - 24703 +194 Temperature_Celsius -O---K 118 099 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 40986 - +# 2 Short offline Completed without error 00% 40242 - +# 3 Short offline Completed without error 00% 39592 - +# 4 Short offline Completed without error 00% 39183 - +# 5 Short offline Completed without error 00% 38883 - +# 6 Short offline Completed without error 00% 38557 - +# 7 Short offline Completed without error 00% 38195 - +# 8 Short offline Completed without error 00% 37791 - +# 9 Short offline Completed without error 00% 37390 - +#10 Short offline Completed without error 00% 36824 - +#11 Short offline Completed without error 00% 36429 - +#12 Short offline Completed without error 00% 35932 - +#13 Short offline Completed without error 00% 35350 - +#14 Short offline Completed without error 00% 34825 - +#15 Short offline Completed without error 00% 34319 - +#16 Short offline Completed without error 00% 33871 - +#17 Short offline Completed without error 00% 33351 - +#18 Short offline Completed without error 00% 32827 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 20/32 Celsius +Lifetime Min/Max Temperature: 2/51 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (268) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 19690 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68AX9N0/BD1B508822CE b/HDD/WDC/WD30/WD30EFRX-68AX9N0/BD1B508822CE new file mode 100644 index 000000000..7906ced90 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68AX9N0/BD1B508822CE @@ -0,0 +1,192 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 23 21:11:19 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40500) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 406) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 178 178 021 - 6083 + 4 Start_Stop_Count -O--CK 076 076 000 - 24847 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 043 043 000 - 41846 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 079 079 000 - 21850 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 147 +193 Load_Cycle_Count -O--CK 192 192 000 - 24699 +194 Temperature_Celsius -O---K 117 100 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 39545 - +# 2 Short offline Completed without error 00% 39137 - +# 3 Short offline Completed without error 00% 38838 - +# 4 Short offline Completed without error 00% 38513 - +# 5 Short offline Completed without error 00% 38150 - +# 6 Short offline Completed without error 00% 37748 - +# 7 Short offline Completed without error 00% 37347 - +# 8 Short offline Completed without error 00% 36781 - +# 9 Short offline Completed without error 00% 36386 - +#10 Short offline Completed without error 00% 35890 - +#11 Short offline Completed without error 00% 35308 - +#12 Short offline Completed without error 00% 34783 - +#13 Short offline Completed without error 00% 34278 - +#14 Short offline Completed without error 00% 33831 - +#15 Short offline Completed without error 00% 33311 - +#16 Short offline Completed without error 00% 32787 - +#17 Short offline Completed without error 00% 32370 - +#18 Short offline Completed without error 00% 31882 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 20/33 Celsius +Lifetime Min/Max Temperature: 2/50 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (231) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 19690 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68AX9N0/DE64061641BB b/HDD/WDC/WD30/WD30EFRX-68AX9N0/DE64061641BB new file mode 100644 index 000000000..5909ca803 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68AX9N0/DE64061641BB @@ -0,0 +1,192 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68AX9N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 23 21:11:19 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40860) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 410) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70bd) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 175 175 021 - 6225 + 4 Start_Stop_Count -O--CK 076 076 000 - 24847 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 041 041 000 - 43772 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 079 079 000 - 21849 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 143 +193 Load_Cycle_Count -O--CK 192 192 000 - 24703 +194 Temperature_Celsius -O---K 118 100 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 41028 - +# 2 Short offline Completed without error 00% 40285 - +# 3 Short offline Completed without error 00% 39635 - +# 4 Short offline Completed without error 00% 39225 - +# 5 Short offline Completed without error 00% 38924 - +# 6 Short offline Completed without error 00% 38598 - +# 7 Short offline Completed without error 00% 38234 - +# 8 Short offline Completed without error 00% 37830 - +# 9 Short offline Completed without error 00% 37428 - +#10 Short offline Completed without error 00% 36860 - +#11 Short offline Completed without error 00% 36465 - +#12 Short offline Completed without error 00% 35967 - +#13 Short offline Completed without error 00% 35384 - +#14 Short offline Completed without error 00% 34859 - +#15 Short offline Completed without error 00% 34352 - +#16 Short offline Completed without error 00% 33905 - +#17 Short offline Completed without error 00% 33384 - +#18 Short offline Completed without error 00% 32859 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 21/33 Celsius +Lifetime Min/Max Temperature: 2/50 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (158) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 19690 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/390F5D794543 b/HDD/WDC/WD30/WD30EFRX-68EUZN0/390F5D794543 new file mode 100644 index 000000000..65f99e2b7 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/390F5D794543 @@ -0,0 +1,179 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Sep 3 19:15:53 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (39840) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 399) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 184 180 021 - 5783 + 4 Start_Stop_Count -O--CK 100 100 000 - 24 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 034 034 000 - 48416 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 24 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 11 +193 Load_Cycle_Count -O--CK 184 184 000 - 49910 +194 Temperature_Celsius -O---K 118 111 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 40820 - +# 2 Extended offline Completed without error 00% 23706 - +# 3 Extended offline Completed without error 00% 15631 - +# 4 Short offline Completed without error 00% 6180 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/35 Celsius +Lifetime Min/Max Temperature: 2/39 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (108) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 6317500 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/3DF5ECC16C60 b/HDD/WDC/WD30/WD30EFRX-68EUZN0/3DF5ECC16C60 new file mode 100644 index 000000000..95511d8bc --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/3DF5ECC16C60 @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 13:56:33 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (39840) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 399) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 186 180 021 - 5700 + 4 Start_Stop_Count -O--CK 100 100 000 - 88 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 053 053 000 - 34343 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 86 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 63 +193 Load_Cycle_Count -O--CK 184 184 000 - 49352 +194 Temperature_Celsius -O---K 117 107 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 15829 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 28/36 Celsius +Lifetime Min/Max Temperature: 2/44 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (329) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 3417745 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/42A73DA952BC b/HDD/WDC/WD30/WD30EFRX-68EUZN0/42A73DA952BC new file mode 100644 index 000000000..862b40d30 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/42A73DA952BC @@ -0,0 +1,329 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:13 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (41040) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 412) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 176 174 021 - 6166 + 4 Start_Stop_Count -O--CK 100 100 000 - 157 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 056 055 000 - 32516 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 157 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 126 +193 Load_Cycle_Count -O--CK 200 200 000 - 276 +194 Temperature_Celsius -O---K 111 107 000 - 39 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 84 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 84 [11] occurred at disk power-on lifetime: 19033 hours (793 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 e8 3a 54 08 40 00 Error: UNC at LBA = 0xe83a5408 = 3896136712 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 e8 3a 54 08 40 08 5d+13:27:04.967 READ FPDMA QUEUED + 61 00 80 00 00 00 00 e8 3a 54 2a 40 08 5d+13:27:04.966 WRITE FPDMA QUEUED + 60 00 80 00 00 00 00 e8 3a 54 2a 40 08 5d+13:27:04.949 READ FPDMA QUEUED + 61 00 5e 00 00 00 00 e8 1f bf aa 40 08 5d+13:27:02.981 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 7c c5 9c 08 40 08 5d+13:27:02.971 WRITE FPDMA QUEUED + +Error 83 [10] occurred at disk power-on lifetime: 19033 hours (793 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 7c c5 9c aa 40 00 Error: IDNF at LBA = 0x7cc59caa = 2093325482 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 5e 00 00 00 00 7c c5 9c aa 40 08 5d+13:13:32.302 WRITE FPDMA QUEUED + 60 00 5e 00 00 00 00 7c c5 9c aa 40 08 5d+13:13:32.301 READ FPDMA QUEUED + 61 01 00 00 00 00 00 e8 3a 52 08 40 08 5d+13:13:08.350 WRITE FPDMA QUEUED + 61 00 62 00 00 00 00 e8 3a 52 48 40 08 5d+13:13:05.282 WRITE FPDMA QUEUED + 60 00 62 00 00 00 00 e8 3a 52 48 40 08 5d+13:13:05.266 READ FPDMA QUEUED + +Error 82 [9] occurred at disk power-on lifetime: 19032 hours (793 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 e8 3a 46 2a 40 00 Error: IDNF at LBA = 0xe83a462a = 3896133162 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 80 00 00 00 00 e8 3a 46 2a 40 08 5d+12:27:40.252 WRITE FPDMA QUEUED + 60 00 80 00 00 00 00 e8 3a 46 2a 40 08 5d+12:27:40.251 READ FPDMA QUEUED + 61 00 80 00 00 00 00 7c c5 9c 2a 40 08 5d+12:27:35.246 WRITE FPDMA QUEUED + 60 00 80 00 00 00 00 7c c5 9c 2a 40 08 5d+12:27:35.245 READ FPDMA QUEUED + 61 01 00 00 00 00 00 e8 3a 46 08 40 08 5d+12:27:09.223 WRITE FPDMA QUEUED + +Error 81 [8] occurred at disk power-on lifetime: 19032 hours (793 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 e8 3a 3a 2a 40 00 Error: IDNF at LBA = 0xe83a3a2a = 3896130090 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 80 00 00 00 00 e8 3a 3a 2a 40 08 5d+12:15:40.435 WRITE FPDMA QUEUED + 60 00 80 00 00 00 00 e8 3a 3a 2a 40 08 5d+12:15:40.423 READ FPDMA QUEUED + 61 00 80 00 00 00 00 7c c5 9c 2a 40 08 5d+12:15:36.433 WRITE FPDMA QUEUED + 60 00 80 00 00 00 00 7c c5 9c 2a 40 08 5d+12:15:36.418 READ FPDMA QUEUED + b0 00 d0 00 00 00 00 00 c2 4f 00 a0 08 5d+12:15:20.898 SMART READ DATA + +Error 80 [7] occurred at disk power-on lifetime: 18899 hours (787 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 00 b0 90 08 40 00 Error: IDNF at LBA = 0x00b09008 = 11571208 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 00 00 00 00 b0 90 08 40 08 16d+09:03:29.584 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 00 b0 8f 08 40 08 16d+09:03:27.381 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 00 b0 8e 08 40 08 16d+09:03:25.292 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 00 b0 8d 08 40 08 16d+09:03:22.675 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 00 b0 8c 08 40 08 16d+09:03:20.072 WRITE FPDMA QUEUED + +Error 79 [6] occurred at disk power-on lifetime: 18899 hours (787 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 00 b0 74 08 40 00 Error: IDNF at LBA = 0x00b07408 = 11564040 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 00 00 00 00 b0 74 08 40 00 16d+09:02:57.756 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 00 b0 73 08 40 00 16d+09:02:57.245 WRITE FPDMA QUEUED + b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 16d+09:02:57.242 SMART READ DATA + ef 00 aa 00 00 00 00 00 00 00 00 a0 00 16d+09:02:57.242 SET FEATURES [Enable read look-ahead] + ef 00 03 00 46 00 00 00 00 00 00 a0 00 16d+09:02:57.242 SET FEATURES [Set transfer mode] + +Error 78 [5] occurred at disk power-on lifetime: 18504 hours (771 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 7c c5 9c 2a 40 00 Error: IDNF at LBA = 0x7cc59c2a = 2093325354 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 80 00 00 00 00 7c c5 9c 2a 40 08 03:05:52.133 WRITE FPDMA QUEUED + 60 00 80 00 00 00 00 7c c5 9c 2a 40 08 03:05:52.132 READ FPDMA QUEUED + 61 00 20 00 00 00 00 cd 37 f4 8a 40 08 03:05:29.733 WRITE FPDMA QUEUED + 60 00 20 00 00 00 00 cd 37 f4 8a 40 08 03:05:27.099 READ FPDMA QUEUED + 61 01 00 00 00 00 00 7c c5 9c 08 40 08 03:05:23.118 WRITE FPDMA QUEUED + +Error 77 [4] occurred at disk power-on lifetime: 18504 hours (771 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 97 93 80 2a 40 00 Error: UNC at LBA = 0x9793802a = 2543026218 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 80 00 00 00 00 97 93 80 2a 40 08 02:59:27.834 READ FPDMA QUEUED + 61 01 00 00 00 00 00 7c c5 9c 08 40 08 02:59:23.553 WRITE FPDMA QUEUED + 61 00 5e 00 00 00 00 97 87 ff aa 40 08 02:59:23.550 WRITE FPDMA QUEUED + 60 00 a2 00 00 00 00 97 87 ff 08 40 08 02:59:23.529 READ FPDMA QUEUED + b0 00 d0 00 00 00 00 00 c2 4f 00 a0 08 02:58:59.197 SMART READ DATA + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 19034 - +# 2 Short offline Completed without error 00% 18505 - +# 3 Short offline Completed without error 00% 17611 - +# 4 Extended offline Completed without error 00% 3203 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 37/41 Celsius +Lifetime Min/Max Temperature: 2/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (296) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 411509 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/5718D611530D b/HDD/WDC/WD30/WD30EFRX-68EUZN0/5718D611530D new file mode 100644 index 000000000..368c97dc0 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/5718D611530D @@ -0,0 +1,176 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 13:56:33 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40320) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 404) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 189 183 021 - 5550 + 4 Start_Stop_Count -O--CK 100 100 000 - 87 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 053 053 000 - 34344 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 85 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 62 +193 Load_Cycle_Count -O--CK 184 184 000 - 49350 +194 Temperature_Celsius -O---K 115 104 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 15829 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 29/38 Celsius +Lifetime Min/Max Temperature: 2/48 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (270) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 3417742 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/7D48A78DCFD3 b/HDD/WDC/WD30/WD30EFRX-68EUZN0/7D48A78DCFD3 new file mode 100644 index 000000000..3d7857393 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/7D48A78DCFD3 @@ -0,0 +1,218 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 13:56:33 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40680) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 408) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 186 183 021 - 5700 + 4 Start_Stop_Count -O--CK 100 100 000 - 42 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 069 069 000 - 22696 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 40 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 29 +193 Load_Cycle_Count -O--CK 191 191 000 - 29793 +194 Temperature_Celsius -O---K 115 101 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 5375 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 29/37 Celsius +Lifetime Min/Max Temperature: 2/49 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (61) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 40 --- Lifetime Power-On Resets +0x01 0x010 4 22696 --- Power-on Hours +0x01 0x018 6 18267948086 --- Logical Sectors Written +0x01 0x020 6 174602624 --- Number of Write Commands +0x01 0x028 6 18943851291 --- Logical Sectors Read +0x01 0x030 6 81970242 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 27303 --- Spindle Motor Power-on Hours +0x03 0x010 4 6780 --- Head Flying Hours +0x03 0x018 4 29823 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 145921 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 33 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 17127 --- Number of Hardware Resets +0x06 0x010 4 52324 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 3417689 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/A5415806E450 b/HDD/WDC/WD30/WD30EFRX-68EUZN0/A5415806E450 new file mode 100644 index 000000000..b088a776b --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/A5415806E450 @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:03:57 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (42000) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 421) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 184 177 021 - 5766 + 4 Start_Stop_Count -O--CK 100 100 000 - 49 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 690 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 49 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 40 +193 Load_Cycle_Count -O--CK 200 200 000 - 463 +194 Temperature_Celsius -O---K 119 109 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 27/35 Celsius +Lifetime Min/Max Temperature: 24/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (275) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 49 --- Lifetime Power-On Resets +0x01 0x010 4 690 --- Power-on Hours +0x01 0x018 6 6300760222 --- Logical Sectors Written +0x01 0x020 6 27945625 --- Number of Write Commands +0x01 0x028 6 1966897642 --- Logical Sectors Read +0x01 0x030 6 9053056 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 687 --- Spindle Motor Power-on Hours +0x03 0x010 4 307 --- Head Flying Hours +0x03 0x018 4 504 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 27 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 26 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 420 --- Number of Hardware Resets +0x06 0x010 4 218505 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 535881 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/ACCD391B379E b/HDD/WDC/WD30/WD30EFRX-68EUZN0/ACCD391B379E new file mode 100644 index 000000000..9efdb7fbe --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/ACCD391B379E @@ -0,0 +1,370 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:03:58 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40680) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 408) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 190 182 021 - 5500 + 4 Start_Stop_Count -O--CK 100 100 000 - 121 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 084 084 000 - 12068 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 121 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 93 +193 Load_Cycle_Count -O--CK 200 200 000 - 1176 +194 Temperature_Celsius -O---K 120 107 000 - 30 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 11 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 11 [10] occurred at disk power-on lifetime: 11288 hours (470 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 00 08 00 40 00 Error: UNC at LBA = 0x00000800 = 2048 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 00 00 08 00 40 08 00:02:51.089 READ FPDMA QUEUED + 60 01 00 00 f8 00 00 00 00 00 00 40 08 00:02:51.089 READ FPDMA QUEUED + 60 00 08 00 98 00 00 08 00 29 48 40 08 00:02:43.329 READ FPDMA QUEUED + 60 00 08 00 f0 00 00 08 00 29 d0 40 08 00:02:43.318 READ FPDMA QUEUED + 60 00 08 00 90 00 00 08 00 29 38 40 08 00:02:43.309 READ FPDMA QUEUED + +Error 10 [9] occurred at disk power-on lifetime: 11245 hours (468 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 00 08 00 40 00 Error: UNC at LBA = 0x00000800 = 2048 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 78 00 00 00 00 08 00 40 08 00:01:35.930 READ FPDMA QUEUED + 60 01 00 00 70 00 00 00 00 00 00 40 08 00:01:35.930 READ FPDMA QUEUED + 60 00 08 00 98 00 00 04 01 00 c8 40 08 00:01:28.117 READ FPDMA QUEUED + 60 00 08 00 68 00 00 08 00 29 d0 40 08 00:01:28.116 READ FPDMA QUEUED + 60 00 08 00 60 00 00 08 00 29 c8 40 08 00:01:28.113 READ FPDMA QUEUED + +Error 9 [8] occurred at disk power-on lifetime: 10233 hours (426 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 01 36 16 d6 68 40 00 Error: IDNF at LBA = 0x13616d668 = 5202433640 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 00 00 01 36 16 d6 68 40 00 00:14:17.632 WRITE FPDMA QUEUED + 61 01 00 00 08 00 01 36 16 d4 68 40 00 00:14:08.975 WRITE FPDMA QUEUED + 61 01 00 00 00 00 01 36 16 d3 68 40 00 00:14:08.975 WRITE FPDMA QUEUED + 61 00 08 00 00 00 01 36 11 c3 08 40 00 00:14:08.975 WRITE FPDMA QUEUED + 61 00 08 00 08 00 01 3e 14 5b 88 40 00 00:14:08.974 WRITE FPDMA QUEUED + +Error 8 [7] occurred at disk power-on lifetime: 10211 hours (425 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 01 24 11 c1 40 00 00 Error: IDNF at LBA = 0x12411c140 = 4900110656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 18 00 00 00 01 24 11 c1 40 40 00 01:33:55.730 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 01:33:52.069 FLUSH CACHE EXT + 61 00 08 00 18 00 01 5d 50 a1 20 40 00 01:33:52.068 WRITE FPDMA QUEUED + 61 00 08 00 10 00 01 5d 50 9f 20 40 00 01:33:52.068 WRITE FPDMA QUEUED + 61 00 08 00 08 00 00 00 10 0b 20 40 00 01:33:52.068 WRITE FPDMA QUEUED + +Error 7 [6] occurred at disk power-on lifetime: 10211 hours (425 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 01 36 13 55 58 00 00 Error: IDNF at LBA = 0x136135558 = 5202203992 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 00 00 01 36 13 55 58 40 00 01:33:09.440 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 01:33:05.188 FLUSH CACHE EXT + 61 00 08 00 18 00 01 5d 50 a1 d8 40 00 01:33:05.188 WRITE FPDMA QUEUED + 61 00 08 00 10 00 01 5d 50 9f d8 40 00 01:33:05.188 WRITE FPDMA QUEUED + 61 00 08 00 08 00 00 00 10 0b d8 40 00 01:33:05.188 WRITE FPDMA QUEUED + +Error 6 [5] occurred at disk power-on lifetime: 10211 hours (425 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 01 24 10 93 70 00 00 Error: IDNF at LBA = 0x124109370 = 4900033392 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 10 00 00 00 01 24 10 93 70 40 00 01:17:26.746 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 01:17:23.647 FLUSH CACHE EXT + 61 00 08 00 18 00 01 5d 50 a1 18 40 00 01:17:23.646 WRITE FPDMA QUEUED + 61 00 08 00 10 00 01 5d 50 9f 18 40 00 01:17:23.646 WRITE FPDMA QUEUED + 61 00 08 00 08 00 00 00 10 0b 18 40 00 01:17:23.646 WRITE FPDMA QUEUED + +Error 5 [4] occurred at disk power-on lifetime: 10211 hours (425 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 01 32 11 bd e0 00 00 Error: IDNF at LBA = 0x13211bde0 = 5134990816 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 00 00 01 32 11 bd e0 40 00 01:16:41.223 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 01:16:36.233 FLUSH CACHE EXT + 61 00 08 00 18 00 01 5d 50 a1 e0 40 00 01:16:36.233 WRITE FPDMA QUEUED + 61 00 08 00 10 00 01 5d 50 9f e0 40 00 01:16:36.233 WRITE FPDMA QUEUED + 61 00 08 00 08 00 00 00 10 0b e0 40 00 01:16:36.233 WRITE FPDMA QUEUED + +Error 4 [3] occurred at disk power-on lifetime: 10211 hours (425 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 01 24 10 7d 58 00 00 Error: IDNF at LBA = 0x124107d58 = 4900027736 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 10 00 00 00 01 24 10 7d 58 40 00 01:03:08.700 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 01:03:04.846 FLUSH CACHE EXT + 61 00 08 00 18 00 01 5d 50 a1 e8 40 00 01:03:04.846 WRITE FPDMA QUEUED + 61 00 08 00 10 00 01 5d 50 9f e8 40 00 01:03:04.846 WRITE FPDMA QUEUED + 61 00 08 00 08 00 00 00 10 0b e8 40 00 01:03:04.846 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 10493 - +# 2 Extended offline Completed without error 00% 10232 - +# 3 Extended offline Completed without error 00% 10219 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 26/34 Celsius +Lifetime Min/Max Temperature: 2/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (274) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 121 --- Lifetime Power-On Resets +0x01 0x010 4 12068 --- Power-on Hours +0x01 0x018 6 43138942247 --- Logical Sectors Written +0x01 0x020 6 735989561 --- Number of Write Commands +0x01 0x028 6 47285106676 --- Logical Sectors Read +0x01 0x030 6 70587702 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 11790 --- Spindle Motor Power-on Hours +0x03 0x010 4 11367 --- Head Flying Hours +0x03 0x018 4 1270 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 56 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 10 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 917518 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 761 --- Number of Hardware Resets +0x06 0x010 4 426365 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 535880 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/B2819228C2D1 b/HDD/WDC/WD30/WD30EFRX-68EUZN0/B2819228C2D1 new file mode 100644 index 000000000..bab168dc4 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/B2819228C2D1 @@ -0,0 +1,175 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 20:26:48 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40680) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 408) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 174 174 021 - 6266 + 4 Start_Stop_Count -O--CK 100 100 000 - 56 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 028 028 000 - 52700 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 54 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 32 +193 Load_Cycle_Count -O--CK 200 200 000 - 557 +194 Temperature_Celsius -O---K 116 106 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 18/37 Celsius +Lifetime Min/Max Temperature: 15/44 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (386) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5969504 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/C5FB1A836F6E b/HDD/WDC/WD30/WD30EFRX-68EUZN0/C5FB1A836F6E new file mode 100644 index 000000000..9a541f5f3 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/C5FB1A836F6E @@ -0,0 +1,177 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:33:01 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (38880) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 390) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 194 174 021 - 5300 + 4 Start_Stop_Count -O--CK 100 100 000 - 61 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 053 053 000 - 34349 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 61 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 45 +193 Load_Cycle_Count -O--CK 194 194 000 - 19911 +194 Temperature_Celsius -O---K 117 110 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 27460 - +# 2 Extended offline Completed without error 00% 27422 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 29/36 Celsius +Lifetime Min/Max Temperature: 2/40 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (161) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 15027808 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/C7E99298BB42 b/HDD/WDC/WD30/WD30EFRX-68EUZN0/C7E99298BB42 new file mode 100644 index 000000000..6c6f1c110 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/C7E99298BB42 @@ -0,0 +1,218 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:33:01 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (38940) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 391) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 183 181 021 - 5850 + 4 Start_Stop_Count -O--CK 100 100 000 - 59 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 058 058 000 - 31389 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 59 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 44 +193 Load_Cycle_Count -O--CK 195 195 000 - 16777 +194 Temperature_Celsius -O---K 119 113 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 24501 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 27/34 Celsius +Lifetime Min/Max Temperature: 2/37 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (67) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 59 --- Lifetime Power-On Resets +0x01 0x010 4 31389 --- Power-on Hours +0x01 0x018 6 3190457088 --- Logical Sectors Written +0x01 0x020 6 19184052 --- Number of Write Commands +0x01 0x028 6 217223677975 --- Logical Sectors Read +0x01 0x030 6 881487822 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 31294 --- Spindle Motor Power-on Hours +0x03 0x010 4 18070 --- Head Flying Hours +0x03 0x018 4 16822 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 436 --- Number of Hardware Resets +0x06 0x010 4 180721 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 15027568 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/DC59A2C620AC b/HDD/WDC/WD30/WD30EFRX-68EUZN0/DC59A2C620AC new file mode 100644 index 000000000..ed21a2fd7 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/DC59A2C620AC @@ -0,0 +1,371 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:03:56 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (39120) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 393) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 186 177 021 - 5666 + 4 Start_Stop_Count -O--CK 100 100 000 - 122 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 084 084 000 - 12066 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 122 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 92 +193 Load_Cycle_Count -O--CK 200 200 000 - 1182 +194 Temperature_Celsius -O---K 119 106 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 19 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 19 [18] occurred at disk power-on lifetime: 11287 hours (470 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 00 08 00 40 00 Error: UNC at LBA = 0x00000800 = 2048 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 90 00 00 00 00 08 00 40 08 00:02:50.817 READ FPDMA QUEUED + 60 01 00 00 88 00 00 00 00 00 00 40 08 00:02:50.817 READ FPDMA QUEUED + 60 00 08 00 d8 00 00 02 00 29 30 40 08 00:02:43.038 READ FPDMA QUEUED + 60 00 08 00 c8 00 00 04 01 00 c8 40 08 00:02:43.029 READ FPDMA QUEUED + 60 00 08 00 28 00 00 02 00 2a a8 40 08 00:02:43.023 READ FPDMA QUEUED + +Error 18 [17] occurred at disk power-on lifetime: 11244 hours (468 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 00 08 00 40 00 Error: UNC at LBA = 0x00000800 = 2048 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 b8 00 00 00 00 08 00 40 08 00:01:35.676 READ FPDMA QUEUED + 60 01 00 00 b0 00 00 00 00 00 00 40 08 00:01:35.676 READ FPDMA QUEUED + 60 00 08 00 30 00 00 08 00 29 48 40 08 00:01:27.880 READ FPDMA QUEUED + 60 00 08 00 28 00 00 08 00 29 38 40 08 00:01:27.869 READ FPDMA QUEUED + 60 00 08 00 20 00 00 02 00 29 30 40 08 00:01:27.869 READ FPDMA QUEUED + +Error 17 [16] occurred at disk power-on lifetime: 10485 hours (436 days + 21 hours) + When the command that caused the error occurred, the device was doing SMART Offline or Self-test. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 00 00 00 40 00 Error: UNC at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 00 00 00 00 40 00 12:45:27.592 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 10 08 00 40 00 12:45:17.508 READ FPDMA QUEUED + 60 01 00 00 08 00 00 00 00 08 00 40 00 12:45:17.508 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 00 00 00 40 00 12:45:17.508 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 10 08 00 40 00 12:45:17.439 READ FPDMA QUEUED + +Error 16 [15] occurred at disk power-on lifetime: 10472 hours (436 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 01 36 20 71 08 00 00 Error: IDNF at LBA = 0x136207108 = 5203063048 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 00 00 01 36 20 71 08 40 00 00:33:50.608 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 00 00:33:46.617 FLUSH CACHE EXT + 61 00 08 00 18 00 01 5d 50 a1 50 40 00 00:33:46.617 WRITE FPDMA QUEUED + 61 00 08 00 10 00 01 5d 50 9f 50 40 00 00:33:46.617 WRITE FPDMA QUEUED + 61 00 08 00 08 00 00 00 10 0b 50 40 00 00:33:46.617 WRITE FPDMA QUEUED + +Error 15 [14] occurred at disk power-on lifetime: 10233 hours (426 days + 9 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 00 de 19 dc d8 40 00 Error: IDNF at LBA = 0xde19dcd8 = 3726236888 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 07 b0 00 00 00 00 de 19 dc d8 40 00 00:21:23.702 WRITE FPDMA QUEUED + 61 07 d0 00 08 00 00 de 19 d5 08 40 00 00:21:23.700 WRITE FPDMA QUEUED + 61 01 00 00 00 00 00 de 19 5f 18 40 00 00:21:23.699 WRITE FPDMA QUEUED + 61 01 00 00 10 00 00 de 19 5b f0 40 00 00:21:23.698 WRITE FPDMA QUEUED + 61 02 00 00 08 00 00 de 19 59 80 40 00 00:21:23.698 WRITE FPDMA QUEUED + +Error 14 [13] occurred at disk power-on lifetime: 10232 hours (426 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 01 24 14 65 78 40 00 Error: IDNF at LBA = 0x124146578 = 4900283768 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 07 d0 00 08 00 01 24 14 65 78 40 00 00:17:08.913 WRITE FPDMA QUEUED + 61 07 80 00 00 00 01 24 14 5d f8 40 00 00:17:08.911 WRITE FPDMA QUEUED + 61 07 b0 00 08 00 01 24 14 56 48 40 00 00:17:08.908 WRITE FPDMA QUEUED + 61 04 d0 00 00 00 01 24 14 51 00 40 00 00:17:08.901 WRITE FPDMA QUEUED + 61 07 c8 00 08 00 01 24 14 49 38 40 00 00:17:08.890 WRITE FPDMA QUEUED + +Error 13 [12] occurred at disk power-on lifetime: 10232 hours (426 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 01 36 17 6a 78 40 00 Error: IDNF at LBA = 0x136176a78 = 5202471544 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 08 00 00 00 00 01 36 17 6a 78 40 00 00:14:31.510 WRITE FPDMA QUEUED + 61 08 00 00 08 00 01 36 17 62 78 40 00 00:14:31.485 WRITE FPDMA QUEUED + 61 08 00 00 00 00 01 36 17 5a 78 40 00 00:14:31.484 WRITE FPDMA QUEUED + 61 08 00 00 08 00 01 36 17 52 78 40 00 00:14:31.481 WRITE FPDMA QUEUED + 61 08 00 00 00 00 01 36 17 4a 78 40 00 00:14:31.479 WRITE FPDMA QUEUED + +Error 12 [11] occurred at disk power-on lifetime: 10232 hours (426 days + 8 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 cc 25 96 a8 40 00 Error: WP at LBA = 0xcc2596a8 = 3425015464 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 08 00 00 10 00 01 36 16 63 e8 40 00 00:14:07.616 WRITE FPDMA QUEUED + 61 08 00 00 10 00 01 36 16 5b e8 40 00 00:14:07.613 WRITE FPDMA QUEUED + 61 08 00 00 10 00 01 36 16 53 e8 40 00 00:14:07.611 WRITE FPDMA QUEUED + 61 05 00 00 10 00 01 36 16 47 d0 40 00 00:14:07.609 WRITE FPDMA QUEUED + 61 01 00 00 10 00 01 36 16 3e c8 40 00 00:14:07.608 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 10492 - +# 2 Extended offline Completed without error 00% 10229 - +# 3 Extended offline Interrupted (host reset) 90% 10211 - +# 4 Short offline Completed without error 00% 10211 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 27/35 Celsius +Lifetime Min/Max Temperature: 2/44 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (254) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 122 --- Lifetime Power-On Resets +0x01 0x010 4 12066 --- Power-on Hours +0x01 0x018 6 43138724687 --- Logical Sectors Written +0x01 0x020 6 737173259 --- Number of Write Commands +0x01 0x028 6 47951230455 --- Logical Sectors Read +0x01 0x030 6 87634354 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 11789 --- Spindle Motor Power-on Hours +0x03 0x010 4 11362 --- Head Flying Hours +0x03 0x018 4 1275 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 19 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 19 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1376277 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 27 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 657 --- Number of Hardware Resets +0x06 0x010 4 495513 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 535880 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EFRX-68EUZN0/FB1DB32A5F46 b/HDD/WDC/WD30/WD30EFRX-68EUZN0/FB1DB32A5F46 new file mode 100644 index 000000000..508790983 --- /dev/null +++ b/HDD/WDC/WD30/WD30EFRX-68EUZN0/FB1DB32A5F46 @@ -0,0 +1,173 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD30EFRX-68EUZN0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 20:26:49 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40980) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 411) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 178 177 021 - 6083 + 4 Start_Stop_Count -O--CK 100 100 000 - 52 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 029 029 000 - 52026 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 52 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 29 +193 Load_Cycle_Count -O--CK 200 200 000 - 2806 +194 Temperature_Celsius -O---K 117 108 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 18/36 Celsius +Lifetime Min/Max Temperature: 2/42 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (143) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5969480 Vendor specific + diff --git a/HDD/WDC/WD30/WD30EZRX-00DC0B0/A616E60F2590 b/HDD/WDC/WD30/WD30EZRX-00DC0B0/A616E60F2590 new file mode 100644 index 000000000..998ef8f6f --- /dev/null +++ b/HDD/WDC/WD30/WD30EZRX-00DC0B0/A616E60F2590 @@ -0,0 +1,170 @@ +smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Green +Device Model: WDC WD30EZRX-00DC0B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 19 20:26:12 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (40380) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 405) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70b5) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 200 172 021 - 4975 + 4 Start_Stop_Count -O--CK 100 100 000 - 70 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 057 057 000 - 32001 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 70 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 32 +193 Load_Cycle_Count -O--CK 012 012 000 - 566441 +194 Temperature_Celsius -O---K 110 102 000 - 40 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +SCT Support Level: 1 +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 37/47 Celsius +Lifetime Min/Max Temperature: 2/48 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (460) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 957078 Vendor specific + + + diff --git a/HDD/WDC/WD30/WD30EZRX-00DC0B0/E95459303940 b/HDD/WDC/WD30/WD30EZRX-00DC0B0/E95459303940 new file mode 100644 index 000000000..2de206fd5 --- /dev/null +++ b/HDD/WDC/WD30/WD30EZRX-00DC0B0/E95459303940 @@ -0,0 +1,168 @@ +smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Green +Device Model: WDC WD30EZRX-00DC0B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 19 20:26:12 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (41520) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 417) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70b5) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 192 173 021 - 5358 + 4 Start_Stop_Count -O--CK 100 100 000 - 75 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 056 056 000 - 32129 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 74 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 35 +193 Load_Cycle_Count -O--CK 009 009 000 - 573581 +194 Temperature_Celsius -O---K 113 102 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +SCT Support Level: 1 +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 35/46 Celsius +Lifetime Min/Max Temperature: 10/48 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (33) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 957070 Vendor specific + diff --git a/HDD/WDC/WD30/WD30EZRZ-00Z5HB0/0AC54C3AC914 b/HDD/WDC/WD30/WD30EZRZ-00Z5HB0/0AC54C3AC914 new file mode 100644 index 000000000..5bfd0b3a3 --- /dev/null +++ b/HDD/WDC/WD30/WD30EZRZ-00Z5HB0/0AC54C3AC914 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD30EZRZ-00Z5HB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 3,000,592,982,016 bytes [3.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 14 22:30:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (38400) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 385) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 182 180 021 - 5900 + 4 Start_Stop_Count -O--CK 100 100 000 - 39 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 050 050 000 - 37044 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 39 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 15 +193 Load_Cycle_Count -O--CK 052 052 000 - 445771 +194 Temperature_Celsius -O---K 113 108 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 39 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 25/42 Celsius +Lifetime Min/Max Temperature: 2/42 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (316) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 29 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 29 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 53113751 Vendor specific + diff --git a/HDD/WDC/WD3000/WD3000GLFS-01F8U0/3DD074D5A4DA b/HDD/WDC/WD3000/WD3000GLFS-01F8U0/3DD074D5A4DA new file mode 100644 index 000000000..a60860d96 --- /dev/null +++ b/HDD/WDC/WD3000/WD3000GLFS-01F8U0/3DD074D5A4DA @@ -0,0 +1,304 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital VelociRaptor +Device Model: WDC WD3000GLFS-01F8U0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 03.03V01 +User Capacity: 300,069,052,416 bytes [300 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 10000 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Fri Aug 7 10:56:03 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4680) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 107 + 3 Spin_Up_Time PO---- 202 199 021 - 2875 + 4 Start_Stop_Count -O--CK 097 097 000 - 3261 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-- 200 200 000 - 0 + 9 Power_On_Hours -O--CK 041 041 000 - 43792 + 10 Spin_Retry_Count -O--C- 100 100 000 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2932 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 144 +193 Load_Cycle_Count -O--CK 199 199 000 - 3261 +194 Temperature_Celsius -O---K 113 103 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--C- 200 200 000 - 0 +198 Offline_Uncorrectable ----C- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 71 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 71 [22] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 0b 61 57 ea 00 00 00 00 00 02 00 0a 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 08 18 08 00 77 57 0b 0a ea 61 00 02 08 00:01:03.264 DEVICE RESET + 0a 0b 60 57 ea 00 18 08 77 08 02 00 1d 10:55:15.979 [RESERVED] + 08 10 08 00 bf 57 0b 1d ea 60 00 02 08 00:00:48.912 DEVICE RESET + +Error 70 [21] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 48 61 57 d2 00 00 00 00 00 02 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 08 38 10 00 97 57 47 01 d2 61 00 02 08 00:00:38.712 DEVICE RESET + 01 47 60 57 d2 00 38 08 97 10 02 00 1d 10:55:09.895 [RESERVED] + 08 30 08 00 cf 57 47 1d d2 60 00 02 08 00:00:53.040 DEVICE RESET + +Error 69 [20] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 42 61 57 ba 00 00 00 00 00 02 00 15 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 08 38 08 00 8f 57 42 15 ba 61 00 02 08 00:00:36.664 DEVICE RESET + 15 3b 61 57 ba 00 38 08 8f 08 02 00 0a 10:55:03.746 RECALIBRATE [RET-4] + 08 28 08 00 f7 57 3b 0a ba 61 00 02 08 00:01:03.272 DEVICE RESET + +Error 68 [19] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 96 60 57 a2 00 00 00 00 00 02 00 1d 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 08 38 50 00 d7 57 96 1d a2 60 00 02 08 00:00:55.096 DEVICE RESET + 1d 96 60 57 a2 00 38 08 d7 50 02 00 1d 10:54:57.686 RECALIBRATE [RET-4] + 08 38 50 00 d7 57 96 1d a2 60 00 02 08 00:00:55.096 DEVICE RESET + +Error 67 [18] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 04 61 57 8b 00 00 00 00 00 02 00 0a 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 08 08 08 00 ff 57 02 0a 8b 61 00 02 08 00:01:05.288 DEVICE RESET + 0a 02 61 57 8b 00 08 08 ff 08 02 00 03 10:54:51.650 [RESERVED] + 08 30 08 00 a7 57 02 03 8b 61 00 02 08 00:00:42.800 DEVICE RESET + +Error 66 [17] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 40 61 57 73 00 00 00 00 00 02 00 0a 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 08 10 08 00 f7 57 40 0a 73 61 00 02 08 00:01:03.248 DEVICE RESET + 0a 40 61 57 73 00 10 08 f7 08 02 00 03 10:54:45.568 [RESERVED] + 08 30 08 00 a7 57 40 03 73 61 00 02 08 00:00:42.800 DEVICE RESET + +Error 65 [16] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 e2 60 57 5a 00 00 00 00 00 02 00 1d 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 08 40 08 00 cf 57 e2 1d 5a 60 00 02 08 00:00:53.056 DEVICE RESET + 1d e2 60 57 5a 00 40 08 cf 08 02 00 1d 10:54:39.330 RECALIBRATE [RET-4] + 08 40 08 00 cf 57 e2 1d 5a 60 00 02 08 00:00:53.056 DEVICE RESET + +Error 64 [15] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 38 61 57 43 00 00 00 00 00 02 00 0a 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 08 30 08 00 2f 57 32 13 43 61 00 02 08 00:01:05.344 DEVICE RESET + 13 31 61 57 43 00 30 08 2f 08 02 00 13 10:54:33.266 RECALIBRATE [RET-4] + 08 30 08 00 a7 57 31 13 43 61 00 02 08 00:00:42.800 DEVICE RESET + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 28/40 Celsius +Lifetime Min/Max Temperature: 28/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (13) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 317 Device-to-host register FISes sent due to a COMRESET +0x8000 4 1012611 Vendor specific + diff --git a/HDD/WDC/WD3200/WD3200AAKS-00L9A0/4064AF4948E4 b/HDD/WDC/WD3200/WD3200AAKS-00L9A0/4064AF4948E4 new file mode 100644 index 000000000..212d2e739 --- /dev/null +++ b/HDD/WDC/WD3200/WD3200AAKS-00L9A0/4064AF4948E4 @@ -0,0 +1,177 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Blue (SATA) +Device Model: WDC WD3200AAKS-00L9A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.03E01 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Wed Aug 19 06:38:45 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 79) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 135 134 021 - 4233 + 4 Start_Stop_Count -O--CK 100 100 000 - 59 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 80835 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 55 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 43 +193 Load_Cycle_Count -O--CK 200 200 000 - 59 +194 Temperature_Celsius -O---K 112 104 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 15294 - +# 2 Short offline Completed without error 00% 15270 - +# 3 Short offline Completed without error 00% 15246 - +# 4 Short offline Completed without error 00% 15222 - +# 5 Extended offline Completed without error 00% 15201 - +# 6 Short offline Completed without error 00% 15198 - +# 7 Short offline Completed without error 00% 15174 - +# 8 Short offline Completed without error 00% 15151 - +# 9 Short offline Completed without error 00% 15127 - +#10 Short offline Completed without error 00% 15103 - +#11 Short offline Completed without error 00% 15079 - +#12 Short offline Completed without error 00% 15055 - +#13 Extended offline Completed without error 00% 15033 - +#14 Short offline Completed without error 00% 15031 - +#15 Short offline Completed without error 00% 15007 - +#16 Short offline Completed without error 00% 14983 - +#17 Short offline Completed without error 00% 14959 - +#18 Short offline Completed without error 00% 14935 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 28/32 Celsius +Lifetime Min/Max Temperature: 30/39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (415) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x8000 4 10267872 Vendor specific + diff --git a/HDD/WDC/WD3200/WD3200AAKS-00V6A0/69D506FDD7AE b/HDD/WDC/WD3200/WD3200AAKS-00V6A0/69D506FDD7AE new file mode 100644 index 000000000..728c51448 --- /dev/null +++ b/HDD/WDC/WD3200/WD3200AAKS-00V6A0/69D506FDD7AE @@ -0,0 +1,181 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Blue (SATA) +Device Model: WDC WD3200AAKS-00V6A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01D05 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Jul 15 14:11:34 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6780) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 82) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0xb037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 144 142 021 - 3775 + 4 Start_Stop_Count -O--CK 098 098 000 - 2664 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 083 083 000 - 12806 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2645 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 489 +193 Load_Cycle_Count -O--CK 200 200 000 - 2174 +194 Temperature_Celsius -O---K 118 097 000 - 25 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12778 - +# 2 Short offline Completed without error 00% 12775 - +# 3 Short offline Completed without error 00% 12769 - +# 4 Short offline Completed without error 00% 12760 - +# 5 Short offline Completed without error 00% 12754 - +# 6 Short offline Completed without error 00% 12751 - +# 7 Short offline Completed without error 00% 12750 - +# 8 Short offline Completed without error 00% 12747 - +# 9 Short offline Completed without error 00% 12747 - +#10 Short offline Completed without error 00% 12734 - +#11 Short offline Completed without error 00% 12728 - +#12 Short offline Completed without error 00% 12711 - +#13 Short offline Completed without error 00% 12690 - +#14 Short offline Completed without error 00% 12675 - +#15 Short offline Completed without error 00% 12626 - +#16 Short offline Completed without error 00% 12586 - +#17 Short offline Completed without error 00% 12506 - +#18 Short offline Completed without error 00% 4766 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 23/25 Celsius +Lifetime Min/Max Temperature: 25/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (116) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 0 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 141 Vendor specific + + + diff --git a/HDD/WDC/WD3200/WD3200AAKX-00ERMA0/436BD333BF05 b/HDD/WDC/WD3200/WD3200AAKX-00ERMA0/436BD333BF05 new file mode 100644 index 000000000..f15e03083 --- /dev/null +++ b/HDD/WDC/WD3200/WD3200AAKX-00ERMA0/436BD333BF05 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD3200AAKX-00ERMA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 15.01H15 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 23:26:54 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6360) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 66) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 142 142 021 - 3900 + 4 Start_Stop_Count -O--CK 100 100 000 - 167 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 013 013 000 - 63861 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 167 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 7 +193 Load_Cycle_Count -O--CK 200 200 000 - 196 +194 Temperature_Celsius -O---K 111 105 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 25404 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 31/36 Celsius +Lifetime Min/Max Temperature: 0/38 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (256) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 2348896 Vendor specific + + + diff --git a/HDD/WDC/WD3200/WD3200BEKT-75PVMT1/899E6C041FA7 b/HDD/WDC/WD3200/WD3200BEKT-75PVMT1/899E6C041FA7 new file mode 100644 index 000000000..c5d2b249e --- /dev/null +++ b/HDD/WDC/WD3200/WD3200BEKT-75PVMT1/899E6C041FA7 @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Black +Device Model: WDC WD3200BEKT-75PVMT1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Oct 29 13:22:21 2020 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5880) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 61) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 162 151 021 - 883 + 4 Start_Stop_Count -O--CK 099 099 000 - 1245 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 090 090 000 - 7579 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1237 +191 G-Sense_Error_Rate -O--CK 001 001 000 - 489 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 303 +193 Load_Cycle_Count -O--CK 126 126 000 - 223151 +194 Temperature_Celsius -O---K 105 085 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 +240 Head_Flying_Hours -O--CK 092 092 000 - 6156 +241 Total_LBAs_Written -O--CK 200 200 000 - 4333639763 +242 Total_LBAs_Read -O--CK 200 200 000 - 5783823925 +254 Free_Fall_Sensor -O--CK 187 187 000 - 13 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6997 - +# 2 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 30/38 Celsius +Lifetime Min/Max Temperature: 0/58 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (123) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 4430 Vendor specific + diff --git a/HDD/WDC/WD3200/WD3200BEVE-00A0HT0/7A2154F05A02 b/HDD/WDC/WD3200/WD3200BEVE-00A0HT0/7A2154F05A02 new file mode 100644 index 000000000..4d40c17c9 --- /dev/null +++ b/HDD/WDC/WD3200/WD3200BEVE-00A0HT0/7A2154F05A02 @@ -0,0 +1,93 @@ +smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Blue EIDE +Device Model: WDC WD3200BEVE-00A0HT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 11.01A11 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5 +Local Time is: Mon Oct 19 18:30:27 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10800) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 127) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x2037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 186 185 021 Pre-fail Always - 1675 + 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1662 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 481 + 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 452 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 57 +193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6881 +194 Temperature_Celsius 0x0022 109 093 000 Old_age Always - 38 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD3200/WD3200BEVT-00A0RT0/FB82A154313D b/HDD/WDC/WD3200/WD3200BEVT-00A0RT0/FB82A154313D new file mode 100644 index 000000000..ff17e191e --- /dev/null +++ b/HDD/WDC/WD3200/WD3200BEVT-00A0RT0/FB82A154313D @@ -0,0 +1,315 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Blue Serial ATA +Device Model: WDC WD3200BEVT-00A0RT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Aug 31 23:35:58 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9600) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 113) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 185 178 021 - 1708 + 4 Start_Stop_Count -O--CK 089 089 000 - 11030 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 069 069 000 - 22710 + 10 Spin_Retry_Count -O--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 092 092 000 - 8619 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 384 +193 Load_Cycle_Count -O--CK 169 169 000 - 93332 +194 Temperature_Celsius -O---K 107 092 000 - 40 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 70 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 70 [21] occurred at disk power-on lifetime: 17198 hours (716 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 1f 46 2f 46 40 00 Error: UNC at LBA = 0x1f462f46 = 524693318 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 01 00 a0 00 00 1f 46 2f 46 40 08 00:07:47.654 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:47.653 READ LOG EXT + 60 00 01 00 90 00 00 1f 46 2f 46 40 08 00:07:45.057 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:45.056 READ LOG EXT + 60 00 01 00 80 00 00 1f 46 2f 46 40 08 00:07:42.459 READ FPDMA QUEUED + +Error 69 [20] occurred at disk power-on lifetime: 17198 hours (716 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 1f 46 2f 46 40 00 Error: UNC at LBA = 0x1f462f46 = 524693318 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 01 00 90 00 00 1f 46 2f 46 40 08 00:07:45.057 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:45.056 READ LOG EXT + 60 00 01 00 80 00 00 1f 46 2f 46 40 08 00:07:42.459 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:42.459 READ LOG EXT + 60 00 01 00 70 00 00 1f 46 2f 46 40 08 00:07:39.862 READ FPDMA QUEUED + +Error 68 [19] occurred at disk power-on lifetime: 17198 hours (716 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 1f 46 2f 46 40 00 Error: UNC at LBA = 0x1f462f46 = 524693318 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 01 00 80 00 00 1f 46 2f 46 40 08 00:07:42.459 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:42.459 READ LOG EXT + 60 00 01 00 70 00 00 1f 46 2f 46 40 08 00:07:39.862 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:39.861 READ LOG EXT + 60 00 01 00 60 00 00 1f 46 2f 46 40 08 00:07:37.282 READ FPDMA QUEUED + +Error 67 [18] occurred at disk power-on lifetime: 17198 hours (716 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 1f 46 2f 46 40 00 Error: UNC at LBA = 0x1f462f46 = 524693318 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 01 00 70 00 00 1f 46 2f 46 40 08 00:07:39.862 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:39.861 READ LOG EXT + 60 00 01 00 60 00 00 1f 46 2f 46 40 08 00:07:37.282 READ FPDMA QUEUED + 60 00 01 00 58 00 00 1f 46 2f 45 40 08 00:07:37.282 READ FPDMA QUEUED + 60 00 01 00 50 00 00 1f 46 2f 44 40 08 00:07:37.282 READ FPDMA QUEUED + +Error 66 [17] occurred at disk power-on lifetime: 17198 hours (716 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 01 00 00 1f 46 2f 46 40 00 Error: UNC at LBA = 0x1f462f46 = 524693318 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 01 00 60 00 00 1f 46 2f 46 40 08 00:07:37.282 READ FPDMA QUEUED + 60 00 01 00 58 00 00 1f 46 2f 45 40 08 00:07:37.282 READ FPDMA QUEUED + 60 00 01 00 50 00 00 1f 46 2f 44 40 08 00:07:37.282 READ FPDMA QUEUED + 60 00 01 00 48 00 00 1f 46 2f 43 40 08 00:07:37.282 READ FPDMA QUEUED + 60 00 01 00 40 00 00 1f 46 2f 42 40 08 00:07:37.281 READ FPDMA QUEUED + +Error 65 [16] occurred at disk power-on lifetime: 17198 hours (716 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 1f 46 2f 46 40 00 Error: UNC at LBA = 0x1f462f46 = 524693318 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 20 00 00 1f 46 2f 40 40 08 00:07:29.372 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:29.372 READ LOG EXT + 60 00 08 00 10 00 00 1f 46 2f 40 40 08 00:07:26.775 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:26.774 READ LOG EXT + 60 00 08 00 00 00 00 1f 46 2f 40 40 08 00:07:24.178 READ FPDMA QUEUED + +Error 64 [15] occurred at disk power-on lifetime: 17198 hours (716 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 1f 46 2f 46 40 00 Error: UNC at LBA = 0x1f462f46 = 524693318 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 10 00 00 1f 46 2f 40 40 08 00:07:26.775 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:26.774 READ LOG EXT + 60 00 08 00 00 00 00 1f 46 2f 40 40 08 00:07:24.178 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:24.177 READ LOG EXT + 60 00 08 00 f0 00 00 1f 46 2f 40 40 08 00:07:21.580 READ FPDMA QUEUED + +Error 63 [14] occurred at disk power-on lifetime: 17198 hours (716 days + 14 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 1f 46 2f 46 40 00 Error: UNC at LBA = 0x1f462f46 = 524693318 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 00 00 00 1f 46 2f 40 40 08 00:07:24.178 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:24.177 READ LOG EXT + 60 00 08 00 f0 00 00 1f 46 2f 40 40 08 00:07:21.580 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:07:21.580 READ LOG EXT + 60 00 08 00 e0 00 00 1f 46 2f 40 40 08 00:07:19.002 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 18995 - +# 2 Short offline Completed without error 00% 16515 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 30/41 Celsius +Lifetime Min/Max Temperature: ?/57 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (116) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 350089 Vendor specific + diff --git a/HDD/WDC/WD3200/WD3200BEVT-22ZCT0/FC5674D2C316 b/HDD/WDC/WD3200/WD3200BEVT-22ZCT0/FC5674D2C316 new file mode 100644 index 000000000..74b16ebf4 --- /dev/null +++ b/HDD/WDC/WD3200/WD3200BEVT-22ZCT0/FC5674D2C316 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Blue Serial ATA +Device Model: WDC WD3200BEVT-22ZCT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 11.01A11 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Wed Jul 8 13:36:36 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 128 +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9960) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 118) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 22 + 3 Spin_Up_Time POS--K 185 182 021 - 1725 + 4 Start_Stop_Count -O--CK 095 095 000 - 5007 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 6629 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 096 096 000 - 4767 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 171 +193 Load_Cycle_Count -O--CK 162 162 000 - 115804 +194 Temperature_Celsius -O---K 110 084 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 27/39 Celsius +Lifetime Min/Max Temperature: ?/63 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: 1/85 Celsius +Temperature History Size (Index): 128 (69) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 0 Device-to-host register FISes sent due to a COMRESET +0x8000 4 83143 Vendor specific + diff --git a/HDD/WDC/WD3200/WD3200BEVT-60ZCT0/018E00A449D9 b/HDD/WDC/WD3200/WD3200BEVT-60ZCT0/018E00A449D9 new file mode 100644 index 000000000..04f07ae5f --- /dev/null +++ b/HDD/WDC/WD3200/WD3200BEVT-60ZCT0/018E00A449D9 @@ -0,0 +1,313 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Blue Serial ATA +Device Model: WDC WD3200BEVT-60ZCT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 11.01A11 +User Capacity: 320,072,933,376 bytes [320 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Sat Jul 4 19:43:10 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (10380) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 122) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 187 184 021 - 1641 + 4 Start_Stop_Count -O--CK 093 093 000 - 7024 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate POSR-K 200 200 051 - 0 + 9 Power_On_Hours -O--CK 096 096 000 - 3205 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 096 096 000 - 4047 +187 Reported_Uncorrect -O--CK 100 092 000 - 29 +188 Command_Timeout -O--CK 100 097 000 - 7 +190 Airflow_Temperature_Cel -O---K 054 032 040 Past 46 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 547 +193 Load_Cycle_Count -O--CK 184 184 000 - 48164 +194 Temperature_Celsius -O---K 101 079 000 - 46 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 +200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 12 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 8 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 8 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 7f 60 01 b9 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 01 00 00 10 01 7e 00 b9 2f 00 00 00 00:00:16.288 NOP [Abort queued commands] + 00 9a 60 01 ac 00 80 00 ef 28 00 00 00 00:01:49.726 NOP [Reserved subcommand] [OBS-ACS-2] + 00 70 40 00 b7 01 9a 00 ac 60 00 00 00 00:01:01.304 NOP [Reserved subcommand] [OBS-ACS-2] + +Error 7 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 9e 60 01 ac 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 78 48 00 ef 01 9a 00 ac 60 00 00 00 00:01:01.312 NOP [Reserved subcommand] [OBS-ACS-2] + 00 8e 60 01 ac 00 70 00 b7 40 00 00 00 00:01:49.722 NOP [Reserved subcommand] [OBS-ACS-2] + 00 60 48 00 6f 01 8b 12 ac 60 00 00 00 00:00:22.376 NOP [Reserved subcommand] [OBS-ACS-2] + +Error 6 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 14 60 01 72 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 01 00 00 10 01 13 00 72 2f 00 00 00 00:00:16.144 NOP [Abort queued commands] + 00 cd 60 01 65 00 f8 00 3f 40 00 00 00 00:01:31.597 NOP [Reserved subcommand] [OBS-ACS-2] + 00 e8 40 00 bf 01 cc 00 65 60 00 00 00 00:01:05.520 NOP [Reserved subcommand] [OBS-ACS-2] + +Error 5 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 cd 60 01 65 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 f0 40 00 ff 01 cd 00 65 60 00 00 00 00:00:16.376 NOP [Reserved subcommand] [OBS-ACS-2] + 00 cb 60 01 65 00 e8 00 bf 40 00 00 00 00:01:31.596 NOP [Reserved subcommand] [OBS-ACS-2] + 00 d8 40 00 3f 01 cb 00 65 60 00 00 00 00:00:32.736 NOP [Reserved subcommand] [OBS-ACS-2] + +Error 4 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 f1 60 01 9e 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 01 00 00 10 01 f1 00 9e 2f 00 00 00 00:00:16.256 NOP [Abort queued commands] + 00 84 60 01 92 00 70 00 6f 08 00 00 13 00:01:43.046 NOP [Reserved subcommand] [OBS-ACS-2] + 00 60 48 00 d7 01 83 13 92 60 00 00 00 00:00:49.000 NOP [Reserved subcommand] [OBS-ACS-2] + +Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 86 60 01 92 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 68 20 00 bf 01 84 13 92 60 00 00 00 00:00:28.528 NOP [Reserved subcommand] [OBS-ACS-2] + 13 83 60 01 92 00 60 00 d7 48 00 00 13 00:01:43.043 RECALIBRATE [RET-4] + 00 50 48 00 7f 01 82 13 92 60 00 00 00 00:00:26.456 NOP [Reserved subcommand] [OBS-ACS-2] + +Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 de 60 01 78 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 01 00 00 10 01 dd 00 78 2f 00 00 00 00:00:16.200 NOP [Abort queued commands] + 00 2c 60 01 6d 00 38 00 07 08 00 00 00 00:01:33.495 NOP [Reserved subcommand] [OBS-ACS-2] + 00 20 40 00 ff 01 2b 00 6d 60 00 00 00 00:00:16.168 NOP [Reserved subcommand] [OBS-ACS-2] + +Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 00 01 00 00 51 00 00 40 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 37 60 01 6d 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] + 00 28 40 00 3f 01 2c 00 6d 60 00 00 00 00:00:01.848 NOP [Reserved subcommand] [OBS-ACS-2] + 00 2b 60 01 6d 00 20 00 ff 40 00 00 00 00:01:33.483 NOP [Reserved subcommand] [OBS-ACS-2] + 00 10 40 00 7f 01 2b 00 6d 60 00 00 00 00:00:48.920 NOP [Reserved subcommand] [OBS-ACS-2] + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3142 - +# 2 Short offline Completed without error 00% 1676 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 24/48 Celsius +Lifetime Min/Max Temperature: ?/68 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/60 Celsius +Min/Max Temperature Limit: 1/85 Celsius +Temperature History Size (Index): 128 (5) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x8000 4 31095 Vendor specific + + + diff --git a/HDD/WDC/WD3750/WD3750LMCW-11D9GS3/AD455D82F6F6 b/HDD/WDC/WD3750/WD3750LMCW-11D9GS3/AD455D82F6F6 new file mode 100644 index 000000000..c7facd582 --- /dev/null +++ b/HDD/WDC/WD3750/WD3750LMCW-11D9GS3/AD455D82F6F6 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RC3 arm64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD3750LMCW-11D9GS3 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 375,083,606,016 bytes [375 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 1.5 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:12:50 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8640) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 100) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 115 111 021 - 3216 + 4 Start_Stop_Count -O--CK 100 100 000 - 146 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 062 062 000 - 28300 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 48 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 22 +193 Load_Cycle_Count -O--CK 001 001 000 - 1031559 +194 Temperature_Celsius -O---K 105 092 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 31/40 Celsius +Lifetime Min/Max Temperature: 22/52 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (3) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 232471 Vendor specific + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/0A599B4228D7 b/HDD/WDC/WD40/WD40EFRX-68N32N0/0A599B4228D7 new file mode 100644 index 000000000..c0a4c535b --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/0A599B4228D7 @@ -0,0 +1,238 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 27 08:34:51 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (43560) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 463) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 169 167 021 - 6533 + 4 Start_Stop_Count -O--CK 096 096 000 - 4238 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 6993 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 32 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 7 +193 Load_Cycle_Count -O--CK 197 197 000 - 9959 +194 Temperature_Celsius -O---K 128 105 000 - 22 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6973 - +# 2 Short offline Completed without error 00% 6949 - +# 3 Extended offline Completed without error 00% 6945 - +# 4 Short offline Completed without error 00% 6925 - +# 5 Short offline Completed without error 00% 6901 - +# 6 Short offline Completed without error 00% 6877 - +# 7 Short offline Completed without error 00% 6853 - +# 8 Short offline Completed without error 00% 6829 - +# 9 Extended offline Completed without error 00% 6825 - +#10 Short offline Completed without error 00% 6805 - +#11 Short offline Completed without error 00% 6781 - +#12 Short offline Completed without error 00% 6757 - +#13 Short offline Completed without error 00% 6733 - +#14 Short offline Completed without error 00% 6709 - +#15 Extended offline Completed without error 00% 6705 - +#16 Short offline Completed without error 00% 6685 - +#17 Short offline Completed without error 00% 6661 - +#18 Short offline Completed without error 00% 6637 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 22 Celsius +Power Cycle Min/Max Temperature: 20/36 Celsius +Lifetime Min/Max Temperature: 15/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (355) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 6993 --- Power-on Hours +0x01 0x018 6 37894959081 --- Logical Sectors Written +0x01 0x020 6 361939988 --- Number of Write Commands +0x01 0x028 6 46006991258 --- Logical Sectors Read +0x01 0x030 6 333311117 --- Number of Read Commands +0x01 0x038 6 3699963520 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5109 --- Spindle Motor Power-on Hours +0x03 0x010 4 4454 --- Head Flying Hours +0x03 0x018 4 9967 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 7 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 22 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 27 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 44 --- Highest Average Short Term Temperature +0x05 0x038 1 18 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 20 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 281 --- Number of Hardware Resets +0x06 0x010 4 149 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1343504 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/0D136A6D0885 b/HDD/WDC/WD40/WD40EFRX-68N32N0/0D136A6D0885 new file mode 100644 index 000000000..7864001d4 --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/0D136A6D0885 @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:22:45 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (44700) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 474) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 180 164 021 - 5975 + 4 Start_Stop_Count -O--CK 100 100 000 - 76 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 060 060 000 - 29612 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 76 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 74 +193 Load_Cycle_Count -O--CK 199 199 000 - 4028 +194 Temperature_Celsius -O---K 116 102 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 30/36 Celsius +Lifetime Min/Max Temperature: 17/48 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (200) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 76 --- Lifetime Power-On Resets +0x01 0x010 4 29612 --- Power-on Hours +0x01 0x018 6 86410265541 --- Logical Sectors Written +0x01 0x020 6 333926939 --- Number of Write Commands +0x01 0x028 6 312544555863 --- Logical Sectors Read +0x01 0x030 6 513046323 --- Number of Read Commands +0x01 0x038 6 3523984896 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 29508 --- Spindle Motor Power-on Hours +0x03 0x010 4 24603 --- Head Flying Hours +0x03 0x018 4 4103 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 59 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 74 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1242 --- Number of Hardware Resets +0x06 0x010 4 117 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 73 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5778281 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/1D720682A80E b/HDD/WDC/WD40/WD40EFRX-68N32N0/1D720682A80E new file mode 100644 index 000000000..c7ebbc75a --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/1D720682A80E @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:22:44 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (44640) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 473) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 184 171 021 - 5766 + 4 Start_Stop_Count -O--CK 100 100 000 - 47 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 084 084 000 - 12049 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 47 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 45 +193 Load_Cycle_Count -O--CK 200 200 000 - 70 +194 Temperature_Celsius -O---K 120 104 000 - 30 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 25/31 Celsius +Lifetime Min/Max Temperature: 21/46 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (200) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 47 --- Lifetime Power-On Resets +0x01 0x010 4 12049 --- Power-on Hours +0x01 0x018 6 40113128987 --- Logical Sectors Written +0x01 0x020 6 226909755 --- Number of Write Commands +0x01 0x028 6 131831357938 --- Logical Sectors Read +0x01 0x030 6 237102060 --- Number of Read Commands +0x01 0x038 6 426727040 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 11994 --- Spindle Motor Power-on Hours +0x03 0x010 4 11935 --- Head Flying Hours +0x03 0x018 4 116 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 161 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 45 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 330 --- Number of Hardware Resets +0x06 0x010 4 72 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 17 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5778259 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/3301F27CF55F b/HDD/WDC/WD40/WD40EFRX-68N32N0/3301F27CF55F new file mode 100644 index 000000000..2baa0b6df --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/3301F27CF55F @@ -0,0 +1,238 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Sep 12 18:21:12 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (43920) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 466) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 165 164 021 - 6708 + 4 Start_Stop_Count -O--CK 100 100 000 - 236 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 578 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 236 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 34 +193 Load_Cycle_Count -O--CK 200 200 000 - 1041 +194 Temperature_Celsius -O---K 119 112 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 573 - +# 2 Short offline Completed without error 00% 557 - +# 3 Short offline Completed without error 00% 490 - +# 4 Short offline Completed without error 00% 457 - +# 5 Short offline Completed without error 00% 451 - +# 6 Short offline Completed without error 00% 417 - +# 7 Short offline Completed without error 00% 415 - +# 8 Short offline Completed without error 00% 414 - +# 9 Short offline Completed without error 00% 411 - +#10 Short offline Completed without error 00% 393 - +#11 Conveyance offline Completed without error 00% 379 - +#12 Short offline Completed without error 00% 378 - +#13 Short offline Completed without error 00% 369 - +#14 Short offline Completed without error 00% 329 - +#15 Short offline Completed without error 00% 304 - +#16 Short offline Completed without error 00% 297 - +#17 Short offline Completed without error 00% 284 - +#18 Short offline Completed without error 00% 276 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 30/31 Celsius +Lifetime Min/Max Temperature: 22/38 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (185) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 236 --- Lifetime Power-On Resets +0x01 0x010 4 578 --- Power-on Hours +0x01 0x018 6 1643495050 --- Logical Sectors Written +0x01 0x020 6 11947578 --- Number of Write Commands +0x01 0x028 6 13338380998 --- Logical Sectors Read +0x01 0x030 6 58727881 --- Number of Read Commands +0x01 0x038 6 2080800000 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 577 --- Spindle Motor Power-on Hours +0x03 0x010 4 340 --- Head Flying Hours +0x03 0x018 4 1076 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 34 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1854 --- Number of Hardware Resets +0x06 0x010 4 785 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2827 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/3F20CA88A45F b/HDD/WDC/WD40/WD40EFRX-68N32N0/3F20CA88A45F new file mode 100644 index 000000000..af23c5bf8 --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/3F20CA88A45F @@ -0,0 +1,221 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 16:15:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (43740) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 464) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 207 182 021 - 4616 + 4 Start_Stop_Count -O--CK 100 100 000 - 20 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 071 071 000 - 21838 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 20 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 9 +193 Load_Cycle_Count -O--CK 200 200 000 - 1927 +194 Temperature_Celsius -O---K 118 110 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 13625 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/35 Celsius +Lifetime Min/Max Temperature: 17/40 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (92) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 21838 --- Power-on Hours +0x01 0x018 6 29047885838 --- Logical Sectors Written +0x01 0x020 6 946134283 --- Number of Write Commands +0x01 0x028 6 172121308702 --- Logical Sectors Read +0x01 0x030 6 1007804476 --- Number of Read Commands +0x01 0x038 6 1307388672 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 21802 --- Spindle Motor Power-on Hours +0x03 0x010 4 11859 --- Head Flying Hours +0x03 0x018 4 1937 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 9 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 393 --- Number of Hardware Resets +0x06 0x010 4 82 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 7763654 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/5EEA15AAFF75 b/HDD/WDC/WD40/WD40EFRX-68N32N0/5EEA15AAFF75 new file mode 100644 index 000000000..0485a2271 --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/5EEA15AAFF75 @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:22:45 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (45180) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 480) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 182 167 021 - 5900 + 4 Start_Stop_Count -O--CK 100 100 000 - 77 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 060 060 000 - 29629 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 77 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 75 +193 Load_Cycle_Count -O--CK 199 199 000 - 3798 +194 Temperature_Celsius -O---K 117 105 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 28/34 Celsius +Lifetime Min/Max Temperature: 16/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (261) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 77 --- Lifetime Power-On Resets +0x01 0x010 4 29629 --- Power-on Hours +0x01 0x018 6 81445019590 --- Logical Sectors Written +0x01 0x020 6 436589220 --- Number of Write Commands +0x01 0x028 6 294492247759 --- Logical Sectors Read +0x01 0x030 6 678619118 --- Number of Read Commands +0x01 0x038 6 3585184896 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 29519 --- Spindle Motor Power-on Hours +0x03 0x010 4 25628 --- Head Flying Hours +0x03 0x018 4 3874 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 75 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 13067 --- Number of Hardware Resets +0x06 0x010 4 122 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 79 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5778232 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/63F4A125206E b/HDD/WDC/WD40/WD40EFRX-68N32N0/63F4A125206E new file mode 100644 index 000000000..6741be9ae --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/63F4A125206E @@ -0,0 +1,221 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Aug 3 16:15:07 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (43920) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 466) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 207 181 021 - 4625 + 4 Start_Stop_Count -O--CK 100 100 000 - 20 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 071 071 000 - 21837 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 20 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 9 +193 Load_Cycle_Count -O--CK 200 200 000 - 1921 +194 Temperature_Celsius -O---K 118 109 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 13624 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/34 Celsius +Lifetime Min/Max Temperature: 17/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (24) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 21837 --- Power-on Hours +0x01 0x018 6 30177001502 --- Logical Sectors Written +0x01 0x020 6 1015450708 --- Number of Write Commands +0x01 0x028 6 175140617745 --- Logical Sectors Read +0x01 0x030 6 1008397748 --- Number of Read Commands +0x01 0x038 6 1303788672 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 21800 --- Spindle Motor Power-on Hours +0x03 0x010 4 11824 --- Head Flying Hours +0x03 0x018 4 1931 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 9 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 401 --- Number of Hardware Resets +0x06 0x010 4 69 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 7763602 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/8879B8C4A349 b/HDD/WDC/WD40/WD40EFRX-68N32N0/8879B8C4A349 new file mode 100644 index 000000000..6bd81bb1c --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/8879B8C4A349 @@ -0,0 +1,221 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 16:15:07 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (45000) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 478) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 207 181 021 - 4641 + 4 Start_Stop_Count -O--CK 100 100 000 - 20 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 071 071 000 - 21837 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 20 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 9 +193 Load_Cycle_Count -O--CK 200 200 000 - 1884 +194 Temperature_Celsius -O---K 118 110 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 13623 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/35 Celsius +Lifetime Min/Max Temperature: 16/40 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (13) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 21837 --- Power-on Hours +0x01 0x018 6 30226658486 --- Logical Sectors Written +0x01 0x020 6 1021576580 --- Number of Write Commands +0x01 0x028 6 174672232192 --- Logical Sectors Read +0x01 0x030 6 1008455230 --- Number of Read Commands +0x01 0x038 6 1303788672 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 21800 --- Spindle Motor Power-on Hours +0x03 0x010 4 11816 --- Head Flying Hours +0x03 0x018 4 1894 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 9 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 393 --- Number of Hardware Resets +0x06 0x010 4 94 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 7763560 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/9CA65696D4A2 b/HDD/WDC/WD40/WD40EFRX-68N32N0/9CA65696D4A2 new file mode 100644 index 000000000..32efe59fd --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/9CA65696D4A2 @@ -0,0 +1,221 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:33:02 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (44040) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 467) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 166 165 021 - 6658 + 4 Start_Stop_Count -O--CK 100 100 000 - 47 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 6959 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 47 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 39 +193 Load_Cycle_Count -O--CK 200 200 000 - 9 +194 Temperature_Celsius -O---K 124 119 000 - 26 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 72 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 21/27 Celsius +Lifetime Min/Max Temperature: 16/28 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (444) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 47 --- Lifetime Power-On Resets +0x01 0x010 4 6959 --- Power-on Hours +0x01 0x018 6 2864742158 --- Logical Sectors Written +0x01 0x020 6 14137893 --- Number of Write Commands +0x01 0x028 6 35359361935 --- Logical Sectors Read +0x01 0x030 6 143113628 --- Number of Read Commands +0x01 0x038 6 3577563520 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6932 --- Spindle Motor Power-on Hours +0x03 0x010 4 6931 --- Head Flying Hours +0x03 0x018 4 49 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 39 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 25 --- Average Short Term Temperature +0x05 0x018 1 24 --- Average Long Term Temperature +0x05 0x020 1 28 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 26 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 24 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 290 --- Number of Hardware Resets +0x06 0x010 4 240 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 18 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 15027332 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/BA94DF5DDA04 b/HDD/WDC/WD40/WD40EFRX-68N32N0/BA94DF5DDA04 new file mode 100644 index 000000000..f0ac670af --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/BA94DF5DDA04 @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:22:45 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (44880) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 477) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 181 164 021 - 5925 + 4 Start_Stop_Count -O--CK 100 100 000 - 75 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 060 060 000 - 29592 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 75 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 73 +193 Load_Cycle_Count -O--CK 200 200 000 - 304 +194 Temperature_Celsius -O---K 118 104 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 28/33 Celsius +Lifetime Min/Max Temperature: 17/46 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (391) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 75 --- Lifetime Power-On Resets +0x01 0x010 4 29592 --- Power-on Hours +0x01 0x018 6 111978508075 --- Logical Sectors Written +0x01 0x020 6 398840246 --- Number of Write Commands +0x01 0x028 6 323994172595 --- Logical Sectors Read +0x01 0x030 6 518570747 --- Number of Read Commands +0x01 0x038 6 3451984896 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 29469 --- Spindle Motor Power-on Hours +0x03 0x010 4 28256 --- Head Flying Hours +0x03 0x018 4 378 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 73 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 558 --- Number of Hardware Resets +0x06 0x010 4 114 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 25 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5778265 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/BDC976344F1D b/HDD/WDC/WD40/WD40EFRX-68N32N0/BDC976344F1D new file mode 100644 index 000000000..8c0f11fbc --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/BDC976344F1D @@ -0,0 +1,238 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Sep 12 18:21:13 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (44880) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 477) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 167 166 021 - 6608 + 4 Start_Stop_Count -O--CK 100 100 000 - 236 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 578 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 236 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 34 +193 Load_Cycle_Count -O--CK 200 200 000 - 891 +194 Temperature_Celsius -O---K 118 111 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 573 - +# 2 Short offline Completed without error 00% 557 - +# 3 Short offline Completed without error 00% 490 - +# 4 Short offline Completed without error 00% 457 - +# 5 Short offline Completed without error 00% 451 - +# 6 Short offline Completed without error 00% 416 - +# 7 Short offline Completed without error 00% 415 - +# 8 Short offline Completed without error 00% 414 - +# 9 Short offline Completed without error 00% 410 - +#10 Short offline Completed without error 00% 393 - +#11 Conveyance offline Completed without error 00% 379 - +#12 Short offline Completed without error 00% 378 - +#13 Short offline Completed without error 00% 369 - +#14 Short offline Completed without error 00% 329 - +#15 Short offline Completed without error 00% 304 - +#16 Short offline Completed without error 00% 297 - +#17 Short offline Completed without error 00% 284 - +#18 Short offline Completed without error 00% 276 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 30/32 Celsius +Lifetime Min/Max Temperature: 22/39 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (175) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 236 --- Lifetime Power-On Resets +0x01 0x010 4 578 --- Power-on Hours +0x01 0x018 6 1639885690 --- Logical Sectors Written +0x01 0x020 6 11804028 --- Number of Write Commands +0x01 0x028 6 13263001959 --- Logical Sectors Read +0x01 0x030 6 57238017 --- Number of Read Commands +0x01 0x038 6 2080800000 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 577 --- Spindle Motor Power-on Hours +0x03 0x010 4 359 --- Head Flying Hours +0x03 0x018 4 926 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 34 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1853 --- Number of Hardware Resets +0x06 0x010 4 778 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2828 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/D13D182608FA b/HDD/WDC/WD40/WD40EFRX-68N32N0/D13D182608FA new file mode 100644 index 000000000..c645042fa --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/D13D182608FA @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:22:44 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (43860) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 465) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 186 171 021 - 5666 + 4 Start_Stop_Count -O--CK 100 100 000 - 72 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 072 072 000 - 20660 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 72 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 56 +193 Load_Cycle_Count -O--CK 200 200 000 - 108 +194 Temperature_Celsius -O---K 118 103 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 27/34 Celsius +Lifetime Min/Max Temperature: 21/47 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (288) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 72 --- Lifetime Power-On Resets +0x01 0x010 4 20660 --- Power-on Hours +0x01 0x018 6 67327413655 --- Logical Sectors Written +0x01 0x020 6 290751307 --- Number of Write Commands +0x01 0x028 6 221768541000 --- Logical Sectors Read +0x01 0x030 6 392913260 --- Number of Read Commands +0x01 0x038 6 1361555968 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 20580 --- Spindle Motor Power-on Hours +0x03 0x010 4 20496 --- Head Flying Hours +0x03 0x018 4 165 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 56 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 45 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 29 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 523 --- Number of Hardware Resets +0x06 0x010 4 268 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5778329 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/D9F5C8E7F5DB b/HDD/WDC/WD40/WD40EFRX-68N32N0/D9F5C8E7F5DB new file mode 100644 index 000000000..627ec6d08 --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/D9F5C8E7F5DB @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Aug 3 16:15:07 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (44880) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 477) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 208 181 021 - 4575 + 4 Start_Stop_Count -O--CK 100 100 000 - 20 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 071 071 000 - 21841 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 20 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 9 +193 Load_Cycle_Count -O--CK 200 200 000 - 1931 +194 Temperature_Celsius -O---K 118 112 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 13628 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/34 Celsius +Lifetime Min/Max Temperature: 16/38 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (241) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 21841 --- Power-on Hours +0x01 0x018 6 29031764470 --- Logical Sectors Written +0x01 0x020 6 942353540 --- Number of Write Commands +0x01 0x028 6 172410632228 --- Logical Sectors Read +0x01 0x030 6 1011494841 --- Number of Read Commands +0x01 0x038 6 1318188672 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 21805 --- Spindle Motor Power-on Hours +0x03 0x010 4 11955 --- Head Flying Hours +0x03 0x018 4 1941 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 9 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 19 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 401 --- Number of Hardware Resets +0x06 0x010 4 73 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 7763801 Vendor specific + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/DDCA23FB78CD b/HDD/WDC/WD40/WD40EFRX-68N32N0/DDCA23FB78CD new file mode 100644 index 000000000..20f811c9e --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/DDCA23FB78CD @@ -0,0 +1,238 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Sep 12 18:21:11 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (43860) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 465) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 169 167 021 - 6550 + 4 Start_Stop_Count -O--CK 100 100 000 - 236 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 579 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 236 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 34 +193 Load_Cycle_Count -O--CK 200 200 000 - 1027 +194 Temperature_Celsius -O---K 119 112 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 573 - +# 2 Short offline Completed without error 00% 557 - +# 3 Short offline Completed without error 00% 490 - +# 4 Short offline Completed without error 00% 457 - +# 5 Short offline Completed without error 00% 451 - +# 6 Short offline Completed without error 00% 417 - +# 7 Short offline Completed without error 00% 415 - +# 8 Short offline Completed without error 00% 414 - +# 9 Short offline Completed without error 00% 411 - +#10 Short offline Completed without error 00% 393 - +#11 Conveyance offline Completed without error 00% 379 - +#12 Short offline Completed without error 00% 378 - +#13 Short offline Completed without error 00% 369 - +#14 Short offline Completed without error 00% 329 - +#15 Short offline Completed without error 00% 304 - +#16 Short offline Completed without error 00% 297 - +#17 Short offline Completed without error 00% 284 - +#18 Short offline Completed without error 00% 276 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 30/31 Celsius +Lifetime Min/Max Temperature: 22/38 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (238) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 236 --- Lifetime Power-On Resets +0x01 0x010 4 579 --- Power-on Hours +0x01 0x018 6 1643583674 --- Logical Sectors Written +0x01 0x020 6 12585863 --- Number of Write Commands +0x01 0x028 6 13442539215 --- Logical Sectors Read +0x01 0x030 6 59182798 --- Number of Read Commands +0x01 0x038 6 2084400000 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 577 --- Spindle Motor Power-on Hours +0x03 0x010 4 344 --- Head Flying Hours +0x03 0x018 4 1062 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 34 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1597 --- Number of Hardware Resets +0x06 0x010 4 1359 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2826 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/E31A509E741D b/HDD/WDC/WD40/WD40EFRX-68N32N0/E31A509E741D new file mode 100644 index 000000000..863645cae --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/E31A509E741D @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:22:44 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (44640) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 473) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 179 162 021 - 6025 + 4 Start_Stop_Count -O--CK 100 100 000 - 73 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 072 072 000 - 20665 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 73 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 57 +193 Load_Cycle_Count -O--CK 200 200 000 - 108 +194 Temperature_Celsius -O---K 115 102 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 31/37 Celsius +Lifetime Min/Max Temperature: 21/48 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (71) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 73 --- Lifetime Power-On Resets +0x01 0x010 4 20665 --- Power-on Hours +0x01 0x018 6 67584309397 --- Logical Sectors Written +0x01 0x020 6 293812614 --- Number of Write Commands +0x01 0x028 6 221876974040 --- Logical Sectors Read +0x01 0x030 6 388935935 --- Number of Read Commands +0x01 0x038 6 1379555968 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 20585 --- Spindle Motor Power-on Hours +0x03 0x010 4 20495 --- Head Flying Hours +0x03 0x018 4 166 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 5 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 57 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 46 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 30 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 524 --- Number of Hardware Resets +0x06 0x010 4 268 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 5778285 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/E384E5446A14 b/HDD/WDC/WD40/WD40EFRX-68N32N0/E384E5446A14 new file mode 100644 index 000000000..6a14ded75 --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/E384E5446A14 @@ -0,0 +1,222 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:33:01 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (42900) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 455) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 167 166 021 - 6625 + 4 Start_Stop_Count -O--CK 100 100 000 - 47 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 6949 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 46 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 40 +193 Load_Cycle_Count -O--CK 200 200 000 - 7 +194 Temperature_Celsius -O---K 124 119 000 - 26 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 22 - +# 2 Short offline Completed without error 00% 14 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 21/27 Celsius +Lifetime Min/Max Temperature: 16/28 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (340) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 46 --- Lifetime Power-On Resets +0x01 0x010 4 6949 --- Power-on Hours +0x01 0x018 6 2882154873 --- Logical Sectors Written +0x01 0x020 6 14180845 --- Number of Write Commands +0x01 0x028 6 34059068982 --- Logical Sectors Read +0x01 0x030 6 138299050 --- Number of Read Commands +0x01 0x038 6 3541563520 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6922 --- Spindle Motor Power-on Hours +0x03 0x010 4 6922 --- Head Flying Hours +0x03 0x018 4 48 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 40 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 25 --- Average Short Term Temperature +0x05 0x018 1 24 --- Average Long Term Temperature +0x05 0x020 1 28 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 26 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 24 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 364 --- Number of Hardware Resets +0x06 0x010 4 258 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 38 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 49 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 15027517 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68N32N0/F4037022764F b/HDD/WDC/WD40/WD40EFRX-68N32N0/F4037022764F new file mode 100644 index 000000000..2a41fffcf --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68N32N0/F4037022764F @@ -0,0 +1,238 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68N32N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Sep 12 18:21:12 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (45360) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 482) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 168 166 021 - 6600 + 4 Start_Stop_Count -O--CK 100 100 000 - 236 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 578 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 236 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 34 +193 Load_Cycle_Count -O--CK 200 200 000 - 889 +194 Temperature_Celsius -O---K 119 113 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 573 - +# 2 Short offline Completed without error 00% 557 - +# 3 Short offline Completed without error 00% 490 - +# 4 Short offline Completed without error 00% 457 - +# 5 Short offline Completed without error 00% 451 - +# 6 Short offline Completed without error 00% 416 - +# 7 Short offline Completed without error 00% 415 - +# 8 Short offline Completed without error 00% 414 - +# 9 Short offline Completed without error 00% 410 - +#10 Short offline Completed without error 00% 393 - +#11 Conveyance offline Completed without error 00% 379 - +#12 Short offline Completed without error 00% 378 - +#13 Short offline Completed without error 00% 369 - +#14 Short offline Completed without error 00% 329 - +#15 Short offline Completed without error 00% 304 - +#16 Short offline Completed without error 00% 297 - +#17 Short offline Completed without error 00% 284 - +#18 Short offline Completed without error 00% 276 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 30/31 Celsius +Lifetime Min/Max Temperature: 22/37 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (201) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 236 --- Lifetime Power-On Resets +0x01 0x010 4 578 --- Power-on Hours +0x01 0x018 6 1638316826 --- Logical Sectors Written +0x01 0x020 6 12466322 --- Number of Write Commands +0x01 0x028 6 13276792382 --- Logical Sectors Read +0x01 0x030 6 57887247 --- Number of Read Commands +0x01 0x038 6 2080800000 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 577 --- Spindle Motor Power-on Hours +0x03 0x010 4 359 --- Head Flying Hours +0x03 0x018 4 924 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 34 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1840 --- Number of Hardware Resets +0x06 0x010 4 1381 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2826 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68WT0N0/49666C1A4B62 b/HDD/WDC/WD40/WD40EFRX-68WT0N0/49666C1A4B62 new file mode 100644 index 000000000..d55237b11 --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68WT0N0/49666C1A4B62 @@ -0,0 +1,177 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68WT0N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:33:01 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (51540) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 515) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 179 178 021 - 8016 + 4 Start_Stop_Count -O--CK 100 100 000 - 58 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 058 058 000 - 31292 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 58 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 44 +193 Load_Cycle_Count -O--CK 195 195 000 - 16085 +194 Temperature_Celsius -O---K 123 119 000 - 29 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 39 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 24405 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 23/29 Celsius +Lifetime Min/Max Temperature: 18/32 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (420) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 39 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 39 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 15027417 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EFRX-68WT0N0/CA27004DB6FC b/HDD/WDC/WD40/WD40EFRX-68WT0N0/CA27004DB6FC new file mode 100644 index 000000000..1e382c061 --- /dev/null +++ b/HDD/WDC/WD40/WD40EFRX-68WT0N0/CA27004DB6FC @@ -0,0 +1,224 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD40EFRX-68WT0N0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 27 08:34:51 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (55920) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 559) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 184 174 021 - 7800 + 4 Start_Stop_Count -O--CK 086 086 000 - 14810 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 037 037 000 - 46401 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 424 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 69 +193 Load_Cycle_Count -O--CK 189 189 000 - 33713 +194 Temperature_Celsius -O---K 127 106 000 - 25 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 44996 hours (1874 days + 20 hours) + When the command that caused the error occurred, the device was doing SMART Offline or Self-test. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 00 00 01 7c 65 f9 a8 40 00 Error: IDNF at LBA = 0x17c65f9a8 = 6382025128 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 d0 00 01 7c 65 f9 a8 40 08 1d+23:59:30.191 WRITE FPDMA QUEUED + b0 00 d4 00 00 00 00 00 c2 4f 01 40 08 1d+23:59:28.941 SMART EXECUTE OFF-LINE IMMEDIATE + b0 00 d0 00 01 00 00 00 c2 4f 00 40 08 1d+23:59:28.938 SMART READ DATA + b0 00 d5 00 01 00 00 00 c2 4f 01 40 08 1d+23:59:28.937 SMART READ LOG + b0 00 d5 00 01 00 00 00 c2 4f 06 40 08 1d+23:59:28.937 SMART READ LOG + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 46380 - +# 2 Short offline Completed without error 00% 46356 - +# 3 Extended offline Completed without error 00% 46355 - +# 4 Short offline Completed without error 00% 46332 - +# 5 Short offline Completed without error 00% 46308 - +# 6 Short offline Completed without error 00% 46284 - +# 7 Short offline Completed without error 00% 46260 - +# 8 Short offline Completed without error 00% 46236 - +# 9 Extended offline Completed without error 00% 46235 - +#10 Short offline Completed without error 00% 46212 - +#11 Short offline Completed without error 00% 46188 - +#12 Short offline Completed without error 00% 46164 - +#13 Short offline Completed without error 00% 46140 - +#14 Short offline Completed without error 00% 46116 - +#15 Extended offline Completed without error 00% 46115 - +#16 Short offline Completed without error 00% 46092 - +#17 Short offline Completed without error 00% 46068 - +#18 Short offline Completed without error 00% 46045 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 23/37 Celsius +Lifetime Min/Max Temperature: 7/46 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (203) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1343676 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40EZRX-00SPEB0/27C595DA50B1 b/HDD/WDC/WD40/WD40EZRX-00SPEB0/27C595DA50B1 new file mode 100644 index 000000000..a1b0bfcbb --- /dev/null +++ b/HDD/WDC/WD40/WD40EZRX-00SPEB0/27C595DA50B1 @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Green +Device Model: WDC WD40EZRX-00SPEB0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:17:57 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (50460) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 505) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 184 178 021 - 7766 + 4 Start_Stop_Count -O--CK 099 099 000 - 1926 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 066 066 000 - 25241 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 74 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 49 +193 Load_Cycle_Count -O--CK 178 178 000 - 67528 +194 Temperature_Celsius -O---K 123 109 000 - 29 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 39 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Stand-by (1) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 20/40 Celsius +Lifetime Min/Max Temperature: 16/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (129) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 17777465 Vendor specific + + + diff --git a/HDD/WDC/WD40/WD40PURZ-85TTDY0/093ED928EEF8 b/HDD/WDC/WD40/WD40PURZ-85TTDY0/093ED928EEF8 new file mode 100644 index 000000000..08a80b63d --- /dev/null +++ b/HDD/WDC/WD40/WD40PURZ-85TTDY0/093ED928EEF8 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Purple +Device Model: WDC WD40PURZ-85TTDY0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:13:59 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (43860) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 465) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 191 165 021 - 5441 + 4 Start_Stop_Count -O--CK 095 095 000 - 5313 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 067 067 000 - 24346 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 66 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 48 +193 Load_Cycle_Count -O--CK 199 199 000 - 5269 +194 Temperature_Celsius -O---K 119 108 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 56 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 27/32 Celsius +Lifetime Min/Max Temperature: 14/42 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (349) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 66 --- Lifetime Power-On Resets +0x01 0x010 4 24346 --- Power-on Hours +0x01 0x018 6 57592802287 --- Logical Sectors Written +0x01 0x020 6 526456991 --- Number of Write Commands +0x01 0x028 6 158203676213 --- Logical Sectors Read +0x01 0x030 6 890298383 --- Number of Read Commands +0x01 0x038 6 1746254080 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 24277 --- Spindle Motor Power-on Hours +0x03 0x010 4 24267 --- Head Flying Hours +0x03 0x018 4 5318 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors +0x03 0x040 4 48 --- Number of High Priority Unload Events +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 452 --- Number of Hardware Resets +0x06 0x010 4 33 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1236612 Vendor specific + + + diff --git a/HDD/WDC/WD400/WD400BB-00GFA0/EAE81E205F77 b/HDD/WDC/WD400/WD400BB-00GFA0/EAE81E205F77 new file mode 100644 index 000000000..da8e8a600 --- /dev/null +++ b/HDD/WDC/WD400/WD400BB-00GFA0/EAE81E205F77 @@ -0,0 +1,127 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar +Device Model: WDC WD400BB-00GFA0 +Serial Number: -- +Firmware Version: 09.01B09 +User Capacity: 40,020,664,320 bytes [40.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-5 (minor revision not indicated) +Local Time is: Sun Oct 4 21:30:12 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1506) seconds. +Offline data collection +capabilities: (0x3b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 28) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 200 200 051 - 0 + 3 Spin_Up_Time POS--- 105 093 021 - 2125 + 4 Start_Stop_Count -O--CK 100 100 040 - 817 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate PO-R-- 200 200 051 - 0 + 9 Power_On_Hours -O--CK 008 008 000 - 67399 + 10 Spin_Retry_Count PO--C- 100 100 051 - 0 + 11 Calibration_Retry_Count PO--C- 100 100 051 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 767 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--C- 200 200 000 - 0 +198 Offline_Uncorrectable -O--C- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 0 +200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 614 - +# 2 Short offline Completed without error 00% 446 - +# 3 Short offline Completed without error 00% 348 - +# 4 Short offline Completed without error 00% 180 - +# 5 Short offline Completed without error 00% 12 - +# 6 Short offline Completed without error 00% 936 - +# 7 Short offline Completed without error 00% 768 - +# 8 Short offline Completed without error 00% 600 - +# 9 Short offline Completed without error 00% 432 - +#10 Short offline Completed without error 00% 264 - +#11 Short offline Completed without error 00% 96 - +#12 Short offline Completed without error 00% 1022 - +#13 Short offline Completed without error 00% 855 - +#14 Short offline Completed without error 00% 689 - +#15 Short offline Completed without error 00% 521 - +#16 Short offline Completed without error 00% 353 - +#17 Short offline Completed without error 00% 184 - +#18 Short offline Completed without error 00% 16 - +#19 Short offline Completed without error 00% 942 - +#20 Short offline Completed without error 00% 774 - +#21 Short offline Completed without error 00% 606 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/HDD/WDC/WD4003/WD4003FFBX-68MU3N0/9AE670D69C59 b/HDD/WDC/WD4003/WD4003FFBX-68MU3N0/9AE670D69C59 new file mode 100644 index 000000000..07a0673cb --- /dev/null +++ b/HDD/WDC/WD4003/WD4003FFBX-68MU3N0/9AE670D69C59 @@ -0,0 +1,245 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red Pro +Device Model: WDC WD4003FFBX-68MU3N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.00A83 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 12:25:48 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 87) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 478) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 132 132 054 - 96 + 3 Spin_Up_Time POS--- 153 153 024 - 393 (Average 394) + 4 Start_Stop_Count -O--C- 100 100 000 - 230 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 099 099 000 - 13592 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 230 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 857 +193 Load_Cycle_Count -O--C- 100 100 000 - 857 +194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 22/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 41 00 00 00 00 00 00 00 00 00 00 Error: IDNF at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 e0 00 00 0c 8c bf 78 40 08 22:52:56.462 WRITE FPDMA QUEUED + 61 00 f8 00 e8 00 00 0c 8c c0 78 40 08 22:52:49.490 WRITE FPDMA QUEUED + 61 01 00 00 d8 00 00 0c 8c be 78 40 08 22:52:48.148 WRITE FPDMA QUEUED + 61 01 00 00 d0 00 00 0c 8c bd 78 40 08 22:52:48.148 WRITE FPDMA QUEUED + 61 01 00 00 c8 00 00 0c 8c bc 78 40 08 22:52:47.110 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 38/40 Celsius +Lifetime Min/Max Temperature: 22/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (100) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 230 --- Lifetime Power-On Resets +0x01 0x010 4 13592 --- Power-on Hours +0x01 0x018 6 19873768370 --- Logical Sectors Written +0x01 0x020 6 409055911 --- Number of Write Commands +0x01 0x028 6 1748565835 --- Logical Sectors Read +0x01 0x030 6 25680879 --- Number of Read Commands +0x01 0x038 6 48931358600 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 12860 --- Spindle Motor Power-on Hours +0x03 0x010 4 12860 --- Head Flying Hours +0x03 0x018 4 857 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 2 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 38 N-- Average Short Term Temperature +0x05 0x018 1 37 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 42 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4 --- Number of Hardware Resets +0x06 0x010 4 119 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/WDC/WD4003/WD4003FFBX-68MU3N0/CD5B71F29875 b/HDD/WDC/WD4003/WD4003FFBX-68MU3N0/CD5B71F29875 new file mode 100644 index 000000000..21c529205 --- /dev/null +++ b/HDD/WDC/WD4003/WD4003FFBX-68MU3N0/CD5B71F29875 @@ -0,0 +1,216 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red Pro +Device Model: WDC WD4003FFBX-68MU3N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.00A83 +User Capacity: 4,000,787,030,016 bytes [4.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 12:25:48 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 87) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 490) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 130 130 054 - 100 + 3 Spin_Up_Time POS--- 137 137 024 - 312 (Average 307) + 4 Start_Stop_Count -O--C- 100 100 000 - 231 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 099 099 000 - 13591 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 230 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 861 +193 Load_Cycle_Count -O--C- 100 100 000 - 861 +194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 22/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/38 Celsius +Lifetime Min/Max Temperature: 22/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (109) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 230 --- Lifetime Power-On Resets +0x01 0x010 4 13591 --- Power-on Hours +0x01 0x018 6 19783549840 --- Logical Sectors Written +0x01 0x020 6 407662709 --- Number of Write Commands +0x01 0x028 6 1721694739 --- Logical Sectors Read +0x01 0x030 6 25069681 --- Number of Read Commands +0x01 0x038 6 48930686150 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 12857 --- Spindle Motor Power-on Hours +0x03 0x010 4 12857 --- Head Flying Hours +0x03 0x018 4 861 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 1 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 36 N-- Average Short Term Temperature +0x05 0x018 1 35 N-- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 39 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4 --- Number of Hardware Resets +0x06 0x010 4 118 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD5000/WD5000AAKS-60WWPA0/8D97552F4B09 b/HDD/WDC/WD5000/WD5000AAKS-60WWPA0/8D97552F4B09 new file mode 100644 index 000000000..6ad56822c --- /dev/null +++ b/HDD/WDC/WD5000/WD5000AAKS-60WWPA0/8D97552F4B09 @@ -0,0 +1,319 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Blue (SATA) +Device Model: WDC WD5000AAKS-60WWPA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 16.01H16 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Jul 14 00:43:14 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9180) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 93) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 208 + 3 Spin_Up_Time POS--K 141 139 021 - 3916 + 4 Start_Stop_Count -O--CK 098 098 000 - 2692 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate POSR-K 200 200 051 - 0 + 9 Power_On_Hours -O--CK 074 074 000 - 19172 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2670 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 001 000 - 241 +188 Command_Timeout -O--CK 100 099 000 - 7 +190 Airflow_Temperature_Cel -O---K 069 056 040 - 31 (Min/Max 26/32) +192 Power-Off_Retract_Count -O--CK 200 200 000 - 251 +193 Load_Cycle_Count -O--CK 200 200 000 - 2440 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 241 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 241 [0] occurred at disk power-on lifetime: 6424 hours (267 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 14 c6 22 9c e0 00 Error: UNC 8 sectors at LBA = 0x14c6229c = 348529308 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 14 c6 22 98 e0 00 00:01:09.365 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 90 e0 00 00:01:09.365 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 88 e0 00 00:01:09.365 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 80 e0 00 00:01:09.365 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 78 e0 00 00:01:09.365 READ DMA EXT + +Error 240 [23] occurred at disk power-on lifetime: 6424 hours (267 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 14 c6 22 9c e0 00 Error: UNC 8 sectors at LBA = 0x14c6229c = 348529308 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 14 c6 22 98 e0 00 00:00:44.931 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 90 e0 00 00:00:44.931 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 88 e0 00 00:00:44.931 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 80 e0 00 00:00:44.930 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 78 e0 00 00:00:44.930 READ DMA EXT + +Error 239 [22] occurred at disk power-on lifetime: 6424 hours (267 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 14 c6 22 9c e0 00 Error: UNC 8 sectors at LBA = 0x14c6229c = 348529308 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 14 c6 22 98 e0 00 00:05:30.732 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 90 e0 00 00:05:30.732 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 88 e0 00 00:05:30.732 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 80 e0 00 00:05:30.732 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 78 e0 00 00:05:30.732 READ DMA EXT + +Error 238 [21] occurred at disk power-on lifetime: 6352 hours (264 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 14 c6 22 9c e0 00 Error: UNC 8 sectors at LBA = 0x14c6229c = 348529308 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 14 c6 22 98 e0 00 00:01:09.299 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 90 e0 00 00:01:09.299 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 88 e0 00 00:01:09.299 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 80 e0 00 00:01:09.299 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 78 e0 00 00:01:09.299 READ DMA EXT + +Error 237 [20] occurred at disk power-on lifetime: 6352 hours (264 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 14 c6 22 9c e0 00 Error: UNC 8 sectors at LBA = 0x14c6229c = 348529308 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 14 c6 22 98 e0 00 23:59:16.053 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 90 e0 00 23:59:16.052 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 88 e0 00 23:59:16.052 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 80 e0 00 23:59:16.052 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 78 e0 00 23:59:16.052 READ DMA EXT + +Error 236 [19] occurred at disk power-on lifetime: 6352 hours (264 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 14 c6 22 9c e0 00 Error: UNC 8 sectors at LBA = 0x14c6229c = 348529308 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 14 c6 22 98 e0 00 23:58:47.082 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 90 e0 00 23:58:47.081 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 88 e0 00 23:58:47.081 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 80 e0 00 23:58:47.081 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 78 e0 00 23:58:47.081 READ DMA EXT + +Error 235 [18] occurred at disk power-on lifetime: 6352 hours (264 days + 16 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 14 c6 22 9c e0 00 Error: UNC 8 sectors at LBA = 0x14c6229c = 348529308 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 14 c6 22 98 e0 00 23:56:43.546 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 90 e0 00 23:56:43.546 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 88 e0 00 23:56:43.546 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 80 e0 00 23:56:43.545 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 78 e0 00 23:56:43.545 READ DMA EXT + +Error 234 [17] occurred at disk power-on lifetime: 6334 hours (263 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 08 00 00 14 c6 22 9c e0 00 Error: UNC 8 sectors at LBA = 0x14c6229c = 348529308 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 14 c6 22 98 e0 00 06:00:56.217 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 90 e0 00 06:00:56.216 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 88 e0 00 06:00:56.216 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 80 e0 00 06:00:56.216 READ DMA EXT + 25 00 00 00 08 00 00 14 c6 22 78 e0 00 06:00:56.216 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 16367 - +# 2 Extended offline Interrupted (host reset) 90% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 26/32 Celsius +Lifetime Min/Max Temperature: 26/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (110) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 28308 Vendor specific + diff --git a/HDD/WDC/WD5000/WD5000AAKX-22ERMA0/12D0521DC6B8 b/HDD/WDC/WD5000/WD5000AAKX-22ERMA0/12D0521DC6B8 new file mode 100644 index 000000000..ae1d2739e --- /dev/null +++ b/HDD/WDC/WD5000/WD5000AAKX-22ERMA0/12D0521DC6B8 @@ -0,0 +1,313 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD5000AAKX-22ERMA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 17.01H17 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 24 15:25:49 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8580) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 87) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 9 + 3 Spin_Up_Time POS--K 144 142 021 - 3783 + 4 Start_Stop_Count -O--CK 099 099 000 - 1360 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 055 055 000 - 33379 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1359 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 154 +193 Load_Cycle_Count -O--CK 198 198 000 - 6795 +194 Temperature_Celsius -O---K 094 087 000 - 49 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 2 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 9 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 9 [8] occurred at disk power-on lifetime: 8934 hours (372 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 1b 12 61 78 40 00 Error: UNC at LBA = 0x1b126178 = 454189432 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 58 00 00 1b 12 61 78 40 08 05:41:29.883 READ FPDMA QUEUED + 61 04 00 00 50 00 00 1b 61 a4 00 40 08 04:23:02.889 WRITE FPDMA QUEUED + 61 04 00 00 48 00 00 1b 61 a0 00 40 08 04:23:02.885 WRITE FPDMA QUEUED + 61 04 00 00 40 00 00 1b 61 9c 00 40 08 04:23:02.880 WRITE FPDMA QUEUED + 61 04 00 00 38 00 00 1b 61 98 00 40 08 04:23:02.876 WRITE FPDMA QUEUED + +Error 8 [7] occurred at disk power-on lifetime: 8931 hours (372 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 1b 12 61 78 40 00 Error: UNC at LBA = 0x1b126178 = 454189432 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 b8 00 00 1b 12 61 78 40 08 04:22:52.152 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 04:22:52.149 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 04:22:52.149 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 04:22:52.148 IDENTIFY DEVICE + ef 00 03 00 46 00 00 00 00 00 00 a0 08 04:22:52.148 SET FEATURES [Set transfer mode] + +Error 7 [6] occurred at disk power-on lifetime: 8931 hours (372 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 1b 12 61 78 40 00 Error: UNC at LBA = 0x1b126178 = 454189432 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 b0 00 00 1b 12 61 78 40 08 04:22:50.241 READ FPDMA QUEUED + 61 04 00 00 a8 00 00 1b 71 4c 00 40 08 04:22:50.226 WRITE FPDMA QUEUED + 61 04 00 00 a0 00 00 1b 71 48 00 40 08 04:22:50.222 WRITE FPDMA QUEUED + 61 04 00 00 98 00 00 1b 71 44 00 40 08 04:22:50.216 WRITE FPDMA QUEUED + 61 04 00 00 90 00 00 1b 71 40 00 40 08 04:22:50.212 WRITE FPDMA QUEUED + +Error 6 [5] occurred at disk power-on lifetime: 8931 hours (372 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 1b 12 61 78 40 00 Error: UNC at LBA = 0x1b126178 = 454189432 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 90 00 00 1b 12 61 00 40 08 04:22:46.521 READ FPDMA QUEUED + 60 01 00 00 88 00 00 1b 12 60 00 40 08 04:22:46.520 READ FPDMA QUEUED + 60 01 00 00 80 00 00 1b 12 5f 00 40 08 04:22:46.519 READ FPDMA QUEUED + 60 01 00 00 78 00 00 1b 12 5e 00 40 08 04:22:46.518 READ FPDMA QUEUED + 60 01 00 00 70 00 00 1b 12 5d 00 40 08 04:22:46.517 READ FPDMA QUEUED + +Error 5 [4] occurred at disk power-on lifetime: 8931 hours (372 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 1b 12 61 78 40 00 Error: UNC at LBA = 0x1b126178 = 454189432 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 d8 00 00 1b 12 61 78 40 08 02:06:21.177 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 02:06:14.282 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 02:06:14.282 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 02:06:14.281 IDENTIFY DEVICE + ef 00 03 00 46 00 00 00 00 00 00 a0 08 02:06:14.281 SET FEATURES [Set transfer mode] + +Error 4 [3] occurred at disk power-on lifetime: 8931 hours (372 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 1b 12 61 78 40 00 Error: UNC at LBA = 0x1b126178 = 454189432 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 d0 00 00 1b 12 61 78 40 08 02:06:12.046 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 02:00:58.896 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 02:00:58.896 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 02:00:58.895 IDENTIFY DEVICE + ef 00 03 00 46 00 00 00 00 00 00 a0 08 02:00:58.895 SET FEATURES [Set transfer mode] + +Error 3 [2] occurred at disk power-on lifetime: 8930 hours (372 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 1b 12 61 78 40 00 Error: UNC at LBA = 0x1b126178 = 454189432 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 c8 00 00 1b 12 61 78 40 08 02:00:56.993 READ FPDMA QUEUED + 60 01 00 00 c0 00 00 1b 12 62 00 40 08 02:00:56.990 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 02:00:56.990 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 02:00:56.990 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 02:00:56.989 IDENTIFY DEVICE + +Error 2 [1] occurred at disk power-on lifetime: 8930 hours (372 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 1b 12 61 78 40 00 Error: UNC at LBA = 0x1b126178 = 454189432 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 b8 00 00 1b 12 61 78 40 08 02:00:55.092 READ FPDMA QUEUED + 60 01 00 00 b0 00 00 1b 12 62 00 40 08 02:00:55.092 READ FPDMA QUEUED + ef 00 10 00 02 00 00 00 00 00 00 a0 08 02:00:55.092 SET FEATURES [Enable SATA feature] + 27 00 00 00 00 00 00 00 00 00 00 e0 08 02:00:55.092 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] + ec 00 00 00 00 00 00 00 00 00 00 a0 08 02:00:55.091 IDENTIFY DEVICE + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 49 Celsius +Power Cycle Min/Max Temperature: 27/50 Celsius +Lifetime Min/Max Temperature: 0/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (233) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 95523 Vendor specific + diff --git a/HDD/WDC/WD5000/WD5000AAKX-603CA0/CDD5796CC15B b/HDD/WDC/WD5000/WD5000AAKX-603CA0/CDD5796CC15B new file mode 100644 index 000000000..809d3fce5 --- /dev/null +++ b/HDD/WDC/WD5000/WD5000AAKX-603CA0/CDD5796CC15B @@ -0,0 +1,116 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD5000AAKX-603CA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 18.01H18 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Oct 25 10:59:17 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7980) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 81) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1 + 3 Spin_Up_Time 0x0027 141 138 021 Pre-fail Always - 3933 + 4 Start_Stop_Count 0x0032 084 084 000 Old_age Always - 16686 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 040 040 000 Old_age Always - 43866 + 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 084 084 000 Old_age Always - 16291 +184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 099 000 Old_age Always - 2 +190 Airflow_Temperature_Cel 0x0022 063 047 040 Old_age Always - 37 (Min/Max 33/47) +192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 790 +193 Load_Cycle_Count 0x0032 195 195 000 Old_age Always - 15895 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 38034 - +# 2 Short offline Completed without error 00% 28570 - +# 3 Short offline Completed without error 00% 25720 - +# 4 Short offline Completed without error 00% 16403 - +# 5 Short offline Completed without error 00% 11827 - +# 6 Short offline Completed without error 00% 11679 - +# 7 Short offline Completed without error 00% 11400 - +# 8 Short offline Completed without error 00% 10958 - +# 9 Short offline Completed without error 00% 10924 - +#10 Short offline Completed without error 00% 10788 - +#11 Short offline Completed without error 00% 10722 - +#12 Short offline Completed without error 00% 10667 - +#13 Short offline Completed without error 00% 10637 - +#14 Short offline Completed without error 00% 10628 - +#15 Short offline Completed without error 00% 10566 - +#16 Short offline Completed without error 00% 10531 - +#17 Short offline Interrupted (host reset) 60% 1080 - +#18 Extended offline Interrupted (host reset) 90% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD5000/WD5000AAKX-60U6AA0/4E89CEECB8DB b/HDD/WDC/WD5000/WD5000AAKX-60U6AA0/4E89CEECB8DB new file mode 100644 index 000000000..d1c4f8555 --- /dev/null +++ b/HDD/WDC/WD5000/WD5000AAKX-60U6AA0/4E89CEECB8DB @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD5000AAKX-60U6AA0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 18.01H18 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 23:21:14 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8580) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 87) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 141 141 021 - 3916 + 4 Start_Stop_Count -O--CK 100 100 000 - 267 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate POSR-K 200 200 051 - 0 + 9 Power_On_Hours -O--CK 029 029 000 - 51892 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 266 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 054 047 040 - 46 (Min/Max 45/48) +192 Power-Off_Retract_Count -O--CK 200 200 000 - 82 +193 Load_Cycle_Count -O--CK 200 200 000 - 240 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 45/48 Celsius +Lifetime Min/Max Temperature: 0/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (57) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 664055 Vendor specific + diff --git a/HDD/WDC/WD5000/WD5000B/EBDE241C2336 b/HDD/WDC/WD5000/WD5000B/EBDE241C2336 new file mode 100644 index 000000000..053f41ddd --- /dev/null +++ b/HDD/WDC/WD5000/WD5000B/EBDE241C2336 @@ -0,0 +1,328 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WD5000B +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 15.05G15 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +Local Time is: Thu Jul 23 20:51:43 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 128 (quiet), recommended: 128 +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13080) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 130) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 192 192 051 - 48231 + 3 Spin_Up_Time POS--K 186 179 021 - 1675 + 4 Start_Stop_Count -O--CK 098 098 000 - 2813 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 6054 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1550 +184 End-to-End_Error PO--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 001 000 - 46798 +190 Airflow_Temperature_Cel -O---K 069 039 000 - 31 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 72 +193 Load_Cycle_Count -O--CK 197 197 000 - 10356 +194 Temperature_Celsius -O---K 116 086 000 - 31 +195 Hardware_ECC_Recovered -OS-CK 200 200 000 - 0 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 46798 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 46798 [21] occurred at disk power-on lifetime: 4033 hours (168 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 25 76 80 40 00 Error: WP at LBA = 0x00257680 = 2455168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 28 00 00 00 5f 03 50 40 00 00:49:20.181 WRITE FPDMA QUEUED + 61 00 08 00 08 00 00 00 5f 03 60 40 00 00:49:20.180 WRITE FPDMA QUEUED + 60 00 08 00 20 00 00 00 30 31 42 40 00 00:49:20.179 READ FPDMA QUEUED + 60 00 c0 00 18 00 00 00 25 75 da 40 00 00:49:20.179 READ FPDMA QUEUED + 60 00 08 00 10 00 00 00 15 e1 32 40 00 00:49:20.179 READ FPDMA QUEUED + +Error 46797 [20] occurred at disk power-on lifetime: 4033 hours (168 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 25 76 80 40 00 Error: UNC at LBA = 0x00257680 = 2455168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 c0 00 38 00 00 00 25 75 da 40 00 00:49:17.248 READ FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:49:17.248 SET FEATURES [Enable write cache] + 61 00 08 00 28 00 00 00 5f 03 68 40 00 00:49:14.243 WRITE FPDMA QUEUED + 61 00 08 00 20 00 00 00 03 4a 40 40 00 00:49:14.242 WRITE FPDMA QUEUED + 61 00 08 00 18 00 00 00 64 f4 e0 40 00 00:49:14.242 WRITE FPDMA QUEUED + +Error 46796 [19] occurred at disk power-on lifetime: 4033 hours (168 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 25 76 80 40 00 Error: WP at LBA = 0x00257680 = 2455168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 28 00 00 00 5f 03 68 40 00 00:49:14.243 WRITE FPDMA QUEUED + 61 00 08 00 20 00 00 00 03 4a 40 40 00 00:49:14.242 WRITE FPDMA QUEUED + 61 00 08 00 18 00 00 00 64 f4 e0 40 00 00:49:14.242 WRITE FPDMA QUEUED + 61 00 08 00 10 00 00 00 5f 03 58 40 00 00:49:14.242 WRITE FPDMA QUEUED + 61 00 08 00 08 00 00 00 5f 03 60 40 00 00:49:14.242 WRITE FPDMA QUEUED + +Error 46795 [18] occurred at disk power-on lifetime: 4033 hours (168 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 25 76 80 40 00 Error: WP at LBA = 0x00257680 = 2455168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 20 00 00 00 03 4a 40 40 00 00:49:10.393 WRITE FPDMA QUEUED + 61 00 08 00 18 00 00 00 5f 03 68 40 00 00:49:10.393 WRITE FPDMA QUEUED + 61 00 08 00 10 00 00 00 64 f4 e0 40 00 00:49:10.393 WRITE FPDMA QUEUED + 61 00 08 00 08 00 00 00 60 58 28 40 00 00:49:10.392 WRITE FPDMA QUEUED + 60 00 c0 00 30 00 00 00 25 75 da 40 00 00:49:10.391 READ FPDMA QUEUED + +Error 46794 [17] occurred at disk power-on lifetime: 4033 hours (168 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 25 76 80 40 00 Error: WP at LBA = 0x00257680 = 2455168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 20 00 00 00 03 4a 40 40 00 00:49:07.432 WRITE FPDMA QUEUED + 61 00 08 00 18 00 00 00 64 f4 e0 40 00 00:49:07.432 WRITE FPDMA QUEUED + 61 00 08 00 10 00 00 00 5f 03 60 40 00 00:49:07.431 WRITE FPDMA QUEUED + 61 00 01 00 10 00 00 00 50 1e 68 40 00 00:49:07.430 WRITE FPDMA QUEUED + 60 00 c0 00 50 00 00 00 25 75 da 40 00 00:49:07.430 READ FPDMA QUEUED + +Error 46793 [16] occurred at disk power-on lifetime: 4033 hours (168 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 25 76 80 40 00 Error: WP at LBA = 0x00257680 = 2455168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 38 00 00 00 03 4a 40 40 00 00:49:04.425 WRITE FPDMA QUEUED + 61 00 08 00 30 00 00 00 63 fc 70 40 00 00:49:04.425 WRITE FPDMA QUEUED + 61 00 08 00 28 00 00 00 5f 03 68 40 00 00:49:04.424 WRITE FPDMA QUEUED + 61 00 08 00 28 00 00 02 69 fd c3 40 00 00:49:04.424 WRITE FPDMA QUEUED + 61 00 08 00 18 00 00 02 69 fd bb 40 00 00:49:04.424 WRITE FPDMA QUEUED + +Error 46792 [15] occurred at disk power-on lifetime: 4033 hours (168 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 25 76 80 40 00 Error: WP at LBA = 0x00257680 = 2455168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 18 00 00 00 5f 03 50 40 00 00:49:01.291 WRITE FPDMA QUEUED + 61 00 08 00 08 00 00 00 5f 03 60 40 00 00:49:01.290 WRITE FPDMA QUEUED + 60 00 c0 00 10 00 00 00 25 75 da 40 00 00:49:01.290 READ FPDMA QUEUED + 61 00 08 00 08 00 00 00 60 58 20 40 00 00:49:01.290 WRITE FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:49:01.289 SET FEATURES [Enable write cache] + +Error 46791 [14] occurred at disk power-on lifetime: 4033 hours (168 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 25 76 80 40 00 Error: UNC at LBA = 0x00257680 = 2455168 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 c0 00 08 00 00 00 25 75 da 40 00 00:48:58.173 READ FPDMA QUEUED + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:48:58.173 SET FEATURES [Enable write cache] + ef 00 02 00 00 00 00 00 00 00 00 00 00 00:48:58.173 SET FEATURES [Enable write cache] + 60 00 c0 00 d8 00 00 00 25 75 da 40 00 00:48:55.246 READ FPDMA QUEUED + 61 00 08 00 08 00 00 00 63 fc 68 40 00 00:48:55.246 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed: read failure 10% 2619 6658104 +# 2 Short offline Completed: read failure 10% 2553 6658104 +# 3 Short offline Completed: read failure 40% 1521 4192504 +# 4 Short offline Completed without error 00% 1226 - +# 5 Short offline Completed: read failure 10% 284 9457920 +# 6 Short offline Completed: read failure 10% 284 9457920 + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 23/30 Celsius +Lifetime Min/Max Temperature: 15/61 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (63) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2636 Vendor specific + diff --git a/HDD/WDC/WD5000/WD5000BMVV-11A1CS0/02BD908C2B7F b/HDD/WDC/WD5000/WD5000BMVV-11A1CS0/02BD908C2B7F new file mode 100644 index 000000000..f0fa25ef9 --- /dev/null +++ b/HDD/WDC/WD5000/WD5000BMVV-11A1CS0/02BD908C2B7F @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Elements / My Passport (USB) +Device Model: WDC WD5000BMVV-11A1CS0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Oct 30 01:13:29 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12780) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 149) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 148 141 021 - 3575 + 4 Start_Stop_Count -O--CK 069 069 000 - 31397 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 057 057 000 - 31405 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 784 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 231 +193 Load_Cycle_Count -O--CK 159 159 000 - 125364 +194 Temperature_Celsius -O---K 110 094 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Stand-by (1) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 34/48 Celsius +Lifetime Min/Max Temperature: 24/53 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (7) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 6144074 Vendor specific + diff --git a/HDD/WDC/WD5000/WD5000LPCX-21VHAT0/93BF86AB1292 b/HDD/WDC/WD5000/WD5000LPCX-21VHAT0/93BF86AB1292 new file mode 100644 index 000000000..61b090da1 --- /dev/null +++ b/HDD/WDC/WD5000/WD5000LPCX-21VHAT0/93BF86AB1292 @@ -0,0 +1,97 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD5000LPCX-21VHAT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 14:43:16 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8220) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 95) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 151 143 021 Pre-fail Always - 1441 + 4 Start_Stop_Count 0x0032 090 090 000 Old_age Always - 10251 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 936 + 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 630 +191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 239 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 35 +193 Load_Cycle_Count 0x0032 183 183 000 Old_age Always - 51922 +194 Temperature_Celsius 0x0022 107 088 000 Old_age Always - 36 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD5000/WD5000LPCX-24VHAT0/AB55E09B7CC3 b/HDD/WDC/WD5000/WD5000LPCX-24VHAT0/AB55E09B7CC3 new file mode 100644 index 000000000..2a424b0df --- /dev/null +++ b/HDD/WDC/WD5000/WD5000LPCX-24VHAT0/AB55E09B7CC3 @@ -0,0 +1,175 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD5000LPCX-24VHAT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 02.01A02 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 24 23:35:33 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8520) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 99) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 152 148 021 - 1391 + 4 Start_Stop_Count -O--CK 099 099 000 - 1584 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 3689 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1164 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 105 +193 Load_Cycle_Count -O--CK 200 200 000 - 1836 +194 Temperature_Celsius -O---K 112 099 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 48 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0x50) Completed without error 00% 8 - +# 2 Short offline Completed without error 00% 8 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Stand-by (1) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 24/32 Celsius +Lifetime Min/Max Temperature: 16/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (112) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 20978 Vendor specific + + + diff --git a/HDD/WDC/WD5000/WD5000LPLX-00ZNTT0/5E05FFF75E42 b/HDD/WDC/WD5000/WD5000LPLX-00ZNTT0/5E05FFF75E42 new file mode 100644 index 000000000..a8148aacf --- /dev/null +++ b/HDD/WDC/WD5000/WD5000LPLX-00ZNTT0/5E05FFF75E42 @@ -0,0 +1,116 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black Mobile +Device Model: WDC WD5000LPLX-00ZNTT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 15:05:53 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6420) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 75) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 144 143 021 Pre-fail Always - 1766 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 304 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 597 + 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 304 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 5 +193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 12180 +194 Temperature_Celsius 0x0022 104 095 000 Old_age Always - 39 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 90% 596 - +# 2 Extended offline Interrupted (host reset) 10% 582 - +# 3 Short offline Completed without error 00% 542 - +# 4 Extended offline Interrupted (host reset) 10% 532 - +# 5 Short offline Completed without error 00% 524 - +# 6 Short offline Completed without error 00% 513 - +# 7 Short offline Aborted by host 10% 510 - +# 8 Extended offline Interrupted (host reset) 80% 508 - +# 9 Extended offline Interrupted (host reset) 90% 489 - +#10 Extended offline Interrupted (host reset) 70% 485 - +#11 Short offline Completed without error 00% 481 - +#12 Short offline Completed without error 00% 473 - +#13 Short offline Completed without error 00% 471 - +#14 Short offline Completed without error 00% 467 - +#15 Extended offline Interrupted (host reset) 60% 464 - +#16 Short offline Aborted by host 70% 460 - +#17 Extended offline Interrupted (host reset) 80% 453 - +#18 Short offline Completed without error 00% 443 - +#19 Extended offline Interrupted (host reset) 70% 379 - +#20 Extended offline Interrupted (host reset) 30% 369 - +#21 Short offline Aborted by host 10% 366 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD5000/WD5000LPVT-75G33T0/C0C2510667E9 b/HDD/WDC/WD5000/WD5000LPVT-75G33T0/C0C2510667E9 new file mode 100644 index 000000000..cf86f364f --- /dev/null +++ b/HDD/WDC/WD5000/WD5000LPVT-75G33T0/C0C2510667E9 @@ -0,0 +1,179 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WD5000LPVT-75G33T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 14 22:17:02 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8700) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 97) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70b5) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 151 147 021 - 1433 + 4 Start_Stop_Count -O--CK 099 099 000 - 1602 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 077 077 000 - 16997 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 099 099 000 - 1599 +191 G-Sense_Error_Rate -O--CK 001 001 000 - 138 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 36 +193 Load_Cycle_Count -O--CK 140 140 000 - 182190 +194 Temperature_Celsius -O---K 113 100 000 - 30 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 +240 Head_Flying_Hours -O--CK 098 098 000 - 2012 +241 Total_LBAs_Written -O--CK 200 200 000 - 9293550239 +242 Total_LBAs_Read -O--CK 200 200 000 - 9202157351 +254 Free_Fall_Sensor -O--CK 186 186 000 - 14 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 510 - +# 2 Short offline Completed without error 00% 232 - +# 3 Short offline Completed without error 00% 1 - +# 4 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 28/34 Celsius +Lifetime Min/Max Temperature: 23/43 Celsius +Specified Max Operating Temperature: 28 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (104) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 977446 Vendor specific + + + diff --git a/HDD/WDC/WD5000/WD5000LPVX-22V0TT0/FC1D248F6467 b/HDD/WDC/WD5000/WD5000LPVX-22V0TT0/FC1D248F6467 new file mode 100644 index 000000000..4bc92d4ea --- /dev/null +++ b/HDD/WDC/WD5000/WD5000LPVX-22V0TT0/FC1D248F6467 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD5000LPVX-22V0TT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 20 12:02:21 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9660) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 111) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 155 149 021 - 1241 + 4 Start_Stop_Count -O--CK 098 098 000 - 2289 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 546 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 587 +191 G-Sense_Error_Rate -O--CK 086 086 000 - 14 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 52 +193 Load_Cycle_Count -O--CK 198 198 000 - 6250 +194 Temperature_Celsius -O---K 111 101 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 38 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 28/34 Celsius +Lifetime Min/Max Temperature: 0/42 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (51) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 55493 Vendor specific + diff --git a/HDD/WDC/WD5000/WD5000LPVX-60V0TT0/27CF3A7418EB b/HDD/WDC/WD5000/WD5000LPVX-60V0TT0/27CF3A7418EB new file mode 100644 index 000000000..803bf92ff --- /dev/null +++ b/HDD/WDC/WD5000/WD5000LPVX-60V0TT0/27CF3A7418EB @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD5000LPVX-60V0TT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 14:27:22 2020 +08 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9000) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 104) minutes. +SCT capabilities: (0x703d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 152 143 021 - 1383 + 4 Start_Stop_Count -O--CK 098 098 000 - 2589 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate POSR-K 200 200 051 - 0 + 9 Power_On_Hours -O--CK 089 089 000 - 8191 + 10 Spin_Retry_Count PO--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2087 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O---K 059 047 040 - 41 (Min/Max 24/41) +191 G-Sense_Error_Rate -O--CK 001 001 000 - 125 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 111 +193 Load_Cycle_Count -O--CK 151 151 000 - 149904 +194 Temperature_Celsius -O---K 102 090 000 - 41 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 38 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6920 - +# 2 Short offline Completed without error 00% 6550 - +# 3 Short offline Completed without error 00% 6157 - +# 4 Short offline Completed without error 00% 5887 - +# 5 Short offline Completed without error 00% 5609 - +# 6 Short offline Completed without error 00% 5484 - +# 7 Short offline Completed without error 00% 5464 - +# 8 Short offline Completed without error 00% 4957 - +# 9 Short offline Completed without error 00% 4934 - +#10 Short offline Completed without error 00% 4505 - +#11 Short offline Completed without error 00% 4437 - +#12 Short offline Completed without error 00% 4437 - +#13 Short offline Completed without error 00% 4347 - +#14 Short offline Completed without error 00% 4149 - +#15 Short offline Completed without error 00% 4087 - +#16 Short offline Completed without error 00% 4083 - +#17 Short offline Completed without error 00% 3816 - +#18 Short offline Aborted by host 90% 3759 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 24/41 Celsius +Lifetime Min/Max Temperature: -13/53 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (31) + +SCT Error Recovery Control: + Read: 85 (8.5 seconds) + Write: 85 (8.5 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 21381 Vendor specific + diff --git a/HDD/WDC/WD5001/WD5001AALS-00E3A0/137ABCB84D41 b/HDD/WDC/WD5001/WD5001AALS-00E3A0/137ABCB84D41 new file mode 100644 index 000000000..a276d5760 --- /dev/null +++ b/HDD/WDC/WD5001/WD5001AALS-00E3A0/137ABCB84D41 @@ -0,0 +1,162 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD5001AALS-00E3A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 05.01D05 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Aug 26 11:31:51 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7860) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 94) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 173 168 021 - 4350 + 4 Start_Stop_Count -O--CK 100 100 000 - 337 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 074 074 000 - 19585 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 328 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 22 +193 Load_Cycle_Count -O--CK 200 200 000 - 314 +194 Temperature_Celsius -O---K 112 098 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2468 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 26/34 Celsius +Lifetime Min/Max Temperature: 26/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (170) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 898 Vendor specific + diff --git a/HDD/WDC/WD5002/WD5002AALX-00J37A0/01749A5394DD b/HDD/WDC/WD5002/WD5002AALX-00J37A0/01749A5394DD new file mode 100644 index 000000000..fd3238ccf --- /dev/null +++ b/HDD/WDC/WD5002/WD5002AALX-00J37A0/01749A5394DD @@ -0,0 +1,181 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD5002AALX-00J37A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 15.01H15 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:28:52 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 9060) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 92) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 144 143 021 - 3791 + 4 Start_Stop_Count -O--CK 100 100 000 - 94 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 73821 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 92 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 91 +193 Load_Cycle_Count -O--CK 200 200 000 - 2 +194 Temperature_Celsius -O---K 116 107 000 - 27 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8281 - +# 2 Short offline Completed without error 00% 8257 - +# 3 Short offline Completed without error 00% 8233 - +# 4 Short offline Completed without error 00% 8209 - +# 5 Short offline Completed without error 00% 8185 - +# 6 Short offline Completed without error 00% 8161 - +# 7 Short offline Completed without error 00% 8137 - +# 8 Short offline Completed without error 00% 8113 - +# 9 Short offline Completed without error 00% 8089 - +#10 Short offline Completed without error 00% 8065 - +#11 Short offline Completed without error 00% 8041 - +#12 Short offline Completed without error 00% 8017 - +#13 Short offline Completed without error 00% 7993 - +#14 Short offline Completed without error 00% 7970 - +#15 Short offline Completed without error 00% 7946 - +#16 Short offline Completed without error 00% 7922 - +#17 Short offline Completed without error 00% 7898 - +#18 Short offline Completed without error 00% 7874 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 24/29 Celsius +Lifetime Min/Max Temperature: 24/36 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (143) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 91 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 25371845 Vendor specific + + + diff --git a/HDD/WDC/WD5002/WD5002AALX-00J37A0/24970D1CA195 b/HDD/WDC/WD5002/WD5002AALX-00J37A0/24970D1CA195 new file mode 100644 index 000000000..0a3a369bf --- /dev/null +++ b/HDD/WDC/WD5002/WD5002AALX-00J37A0/24970D1CA195 @@ -0,0 +1,181 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD5002AALX-00J37A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 15.01H15 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:28:52 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8460) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 86) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 2 + 3 Spin_Up_Time POS--K 145 144 021 - 3716 + 4 Start_Stop_Count -O--CK 100 100 000 - 93 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 74579 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 91 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 71 +193 Load_Cycle_Count -O--CK 200 200 000 - 21 +194 Temperature_Celsius -O---K 117 103 000 - 26 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9038 - +# 2 Short offline Completed without error 00% 9014 - +# 3 Short offline Completed without error 00% 8990 - +# 4 Short offline Completed without error 00% 8966 - +# 5 Short offline Completed without error 00% 8942 - +# 6 Short offline Completed without error 00% 8919 - +# 7 Short offline Completed without error 00% 8895 - +# 8 Short offline Completed without error 00% 8871 - +# 9 Short offline Completed without error 00% 8847 - +#10 Short offline Completed without error 00% 8823 - +#11 Short offline Completed without error 00% 8799 - +#12 Short offline Completed without error 00% 8775 - +#13 Short offline Completed without error 00% 8751 - +#14 Short offline Completed without error 00% 8727 - +#15 Short offline Completed without error 00% 8703 - +#16 Short offline Completed without error 00% 8679 - +#17 Short offline Completed without error 00% 8655 - +#18 Short offline Completed without error 00% 8631 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 24/29 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (104) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 50 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 25371807 Vendor specific + + + diff --git a/HDD/WDC/WD5002/WD5002AALX-00J37A0/37A291244800 b/HDD/WDC/WD5002/WD5002AALX-00J37A0/37A291244800 new file mode 100644 index 000000000..767d06c74 --- /dev/null +++ b/HDD/WDC/WD5002/WD5002AALX-00J37A0/37A291244800 @@ -0,0 +1,181 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD5002AALX-00J37A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 15.01H15 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:28:52 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8400) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 145 144 021 - 3750 + 4 Start_Stop_Count -O--CK 100 100 000 - 93 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 73698 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 91 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 90 +193 Load_Cycle_Count -O--CK 200 200 000 - 2 +194 Temperature_Celsius -O---K 116 106 000 - 27 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8158 - +# 2 Short offline Completed without error 00% 8134 - +# 3 Short offline Completed without error 00% 8110 - +# 4 Short offline Completed without error 00% 8086 - +# 5 Short offline Completed without error 00% 8062 - +# 6 Short offline Completed without error 00% 8038 - +# 7 Short offline Completed without error 00% 8014 - +# 8 Short offline Completed without error 00% 7990 - +# 9 Short offline Completed without error 00% 7966 - +#10 Short offline Completed without error 00% 7942 - +#11 Short offline Completed without error 00% 7918 - +#12 Short offline Completed without error 00% 7894 - +#13 Short offline Completed without error 00% 7870 - +#14 Short offline Completed without error 00% 7846 - +#15 Short offline Completed without error 00% 7822 - +#16 Short offline Completed without error 00% 7798 - +#17 Short offline Completed without error 00% 7774 - +#18 Short offline Completed without error 00% 7750 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 24/30 Celsius +Lifetime Min/Max Temperature: 24/37 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (107) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 100 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 25371630 Vendor specific + + + diff --git a/HDD/WDC/WD5002/WD5002AALX-00J37A0/388ADB49A063 b/HDD/WDC/WD5002/WD5002AALX-00J37A0/388ADB49A063 new file mode 100644 index 000000000..b3fee5698 --- /dev/null +++ b/HDD/WDC/WD5002/WD5002AALX-00J37A0/388ADB49A063 @@ -0,0 +1,181 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD5002AALX-00J37A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 15.01H15 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:28:52 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8760) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 89) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 144 143 021 - 3766 + 4 Start_Stop_Count -O--CK 100 100 000 - 93 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 74574 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 91 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 71 +193 Load_Cycle_Count -O--CK 200 200 000 - 21 +194 Temperature_Celsius -O---K 116 102 000 - 27 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9033 - +# 2 Short offline Completed without error 00% 9009 - +# 3 Short offline Completed without error 00% 8985 - +# 4 Short offline Completed without error 00% 8961 - +# 5 Short offline Completed without error 00% 8937 - +# 6 Short offline Completed without error 00% 8914 - +# 7 Short offline Completed without error 00% 8890 - +# 8 Short offline Completed without error 00% 8866 - +# 9 Short offline Completed without error 00% 8842 - +#10 Short offline Completed without error 00% 8818 - +#11 Short offline Completed without error 00% 8794 - +#12 Short offline Completed without error 00% 8770 - +#13 Short offline Completed without error 00% 8746 - +#14 Short offline Completed without error 00% 8722 - +#15 Short offline Completed without error 00% 8698 - +#16 Short offline Completed without error 00% 8674 - +#17 Short offline Completed without error 00% 8650 - +#18 Short offline Completed without error 00% 8626 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 25/29 Celsius +Lifetime Min/Max Temperature: 25/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (126) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 0 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 25371931 Vendor specific + + + diff --git a/HDD/WDC/WD5002/WD5002AALX-00J37A0/3A62347E6F44 b/HDD/WDC/WD5002/WD5002AALX-00J37A0/3A62347E6F44 new file mode 100644 index 000000000..7cc928192 --- /dev/null +++ b/HDD/WDC/WD5002/WD5002AALX-00J37A0/3A62347E6F44 @@ -0,0 +1,179 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD5002AALX-00J37A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 15.01H15 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:28:53 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8400) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 143 143 021 - 3825 + 4 Start_Stop_Count -O--CK 100 100 000 - 93 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 73804 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 91 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 90 +193 Load_Cycle_Count -O--CK 200 200 000 - 2 +194 Temperature_Celsius -O---K 117 105 000 - 26 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8264 - +# 2 Short offline Completed without error 00% 8240 - +# 3 Short offline Completed without error 00% 8216 - +# 4 Short offline Completed without error 00% 8192 - +# 5 Short offline Completed without error 00% 8168 - +# 6 Short offline Completed without error 00% 8144 - +# 7 Short offline Completed without error 00% 8120 - +# 8 Short offline Completed without error 00% 8096 - +# 9 Short offline Completed without error 00% 8072 - +#10 Short offline Completed without error 00% 8048 - +#11 Short offline Completed without error 00% 8024 - +#12 Short offline Completed without error 00% 8000 - +#13 Short offline Completed without error 00% 7976 - +#14 Short offline Completed without error 00% 7952 - +#15 Short offline Completed without error 00% 7928 - +#16 Short offline Completed without error 00% 7904 - +#17 Short offline Completed without error 00% 7880 - +#18 Short offline Completed without error 00% 7857 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 24/29 Celsius +Lifetime Min/Max Temperature: 24/38 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (99) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 75 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 25371612 Vendor specific + diff --git a/HDD/WDC/WD5002/WD5002AALX-00J37A0/FA75128B632E b/HDD/WDC/WD5002/WD5002AALX-00J37A0/FA75128B632E new file mode 100644 index 000000000..55ffbc105 --- /dev/null +++ b/HDD/WDC/WD5002/WD5002AALX-00J37A0/FA75128B632E @@ -0,0 +1,181 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Black +Device Model: WDC WD5002AALX-00J37A0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 15.01H15 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:28:52 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8160) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 83) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 140 139 021 - 3975 + 4 Start_Stop_Count -O--CK 100 100 000 - 93 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 73772 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 91 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 90 +193 Load_Cycle_Count -O--CK 200 200 000 - 2 +194 Temperature_Celsius -O---K 115 106 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb5 GPL,SL VS 1 Device vendor specific log +0xb6 GPL VS 1 Device vendor specific log +0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8232 - +# 2 Short offline Completed without error 00% 8208 - +# 3 Short offline Completed without error 00% 8184 - +# 4 Short offline Completed without error 00% 8160 - +# 5 Short offline Completed without error 00% 8136 - +# 6 Short offline Completed without error 00% 8112 - +# 7 Short offline Completed without error 00% 8088 - +# 8 Short offline Completed without error 00% 8064 - +# 9 Short offline Completed without error 00% 8040 - +#10 Short offline Completed without error 00% 8016 - +#11 Short offline Completed without error 00% 7992 - +#12 Short offline Completed without error 00% 7968 - +#13 Short offline Completed without error 00% 7944 - +#14 Short offline Completed without error 00% 7920 - +#15 Short offline Completed without error 00% 7896 - +#16 Short offline Completed without error 00% 7872 - +#17 Short offline Completed without error 00% 7848 - +#18 Short offline Completed without error 00% 7824 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 25/30 Celsius +Lifetime Min/Max Temperature: 25/37 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (207) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 100 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 25371753 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/019B4DB7160E b/HDD/WDC/WD60/WD60EFRX-68L0BN1/019B4DB7160E new file mode 100644 index 000000000..c8e085b7b --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/019B4DB7160E @@ -0,0 +1,252 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:09 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7604) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 729) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 204 196 021 - 8791 + 4 Start_Stop_Count -O--CK 100 100 000 - 143 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 059 059 000 - 29958 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 143 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 126 +193 Load_Cycle_Count -O--CK 198 198 000 - 8635 +194 Temperature_Celsius -O---K 114 099 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 4 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 6534 hours (272 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 2b b5 25 b0 40 00 Error: UNC at LBA = 0x2bb525b0 = 733291952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 30 00 20 00 01 2b 23 47 00 40 00 23d+17:25:08.973 READ FPDMA QUEUED + 60 00 30 00 18 00 01 2a 80 75 98 40 00 23d+17:25:08.950 READ FPDMA QUEUED + 60 00 38 00 10 00 01 2a 80 75 60 40 00 23d+17:25:08.900 READ FPDMA QUEUED + 60 00 40 00 08 00 00 2b b5 25 f0 40 00 23d+17:25:08.635 READ FPDMA QUEUED + 60 00 40 00 00 00 00 2b b5 25 b0 40 00 23d+17:25:08.635 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 6571 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 34/39 Celsius +Lifetime Min/Max Temperature: 22/53 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (473) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 143 --- Lifetime Power-On Resets +0x01 0x010 4 29958 --- Power-on Hours +0x01 0x018 6 93192279133 --- Logical Sectors Written +0x01 0x020 6 1565562728 --- Number of Write Commands +0x01 0x028 6 397082092824 --- Logical Sectors Read +0x01 0x030 6 4145833958 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 29851 --- Spindle Motor Power-on Hours +0x03 0x010 4 29075 --- Head Flying Hours +0x03 0x018 4 8762 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 1 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 37 --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 47 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1236 --- Number of Hardware Resets +0x06 0x010 4 259 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 181 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1591646 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/01FA8438879B b/HDD/WDC/WD60/WD60EFRX-68L0BN1/01FA8438879B new file mode 100644 index 000000000..e6e9ec1fd --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/01FA8438879B @@ -0,0 +1,346 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:16 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6164) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 715) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 197 021 - 9108 + 4 Start_Stop_Count -O--CK 100 100 000 - 44 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 065 065 000 - 25977 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 44 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 42 +193 Load_Cycle_Count -O--CK 200 200 000 - 915 +194 Temperature_Celsius -O---K 121 113 000 - 31 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 40 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 12 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 12 [11] occurred at disk power-on lifetime: 910 hours (37 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 02 ba a0 f1 50 40 00 Error: UNC at LBA = 0x2baa0f150 = 11721044304 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 e0 00 18 00 02 ba a0 f2 a0 40 00 05:30:22.518 READ FPDMA QUEUED + 60 00 e0 00 10 00 02 ba a0 f0 a0 40 00 05:30:22.518 READ FPDMA QUEUED + 60 00 e0 00 08 00 00 00 40 02 a0 40 00 05:30:22.518 READ FPDMA QUEUED + 60 00 e0 00 00 00 00 00 40 00 a0 40 00 05:30:22.518 READ FPDMA QUEUED + ec 00 00 00 00 00 00 00 00 00 00 00 00 05:30:22.517 IDENTIFY DEVICE + +Error 11 [10] occurred at disk power-on lifetime: 909 hours (37 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 00 02 80 40 00 Error: UNC at LBA = 0x00000280 = 640 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 00 00 02 80 40 00 04:30:58.336 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 00 02 80 40 00 04:30:58.334 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 40 02 80 40 00 04:30:58.332 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 40 02 80 40 00 04:30:58.331 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 00 01 80 40 00 04:30:58.330 READ FPDMA QUEUED + +Error 10 [9] occurred at disk power-on lifetime: 909 hours (37 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 3f fc 80 40 00 Error: UNC at LBA = 0x003ffc80 = 4193408 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 00 3f fc 80 40 00 04:28:34.244 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 40 03 80 40 00 04:28:34.243 READ FPDMA QUEUED + 60 01 00 00 08 00 00 00 00 02 00 40 00 04:28:34.241 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 40 02 80 40 00 04:28:34.241 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 00 02 80 40 00 04:28:34.240 READ FPDMA QUEUED + +Error 9 [8] occurred at disk power-on lifetime: 909 hours (37 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 40 01 00 40 00 Error: UNC at LBA = 0x00400100 = 4194560 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 00 40 00 80 40 00 04:27:23.212 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 00 02 00 40 00 04:27:23.211 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 00 01 00 40 00 04:27:23.210 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 00 00 00 40 00 04:27:23.209 READ FPDMA QUEUED + ec 00 00 00 00 00 00 00 00 00 00 00 00 04:27:23.208 IDENTIFY DEVICE + +Error 8 [7] occurred at disk power-on lifetime: 909 hours (37 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 00 01 80 40 00 Error: UNC at LBA = 0x00000180 = 384 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 00 00 01 80 40 00 04:25:13.635 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 00 00 80 40 00 04:25:13.635 READ FPDMA QUEUED + ec 00 00 00 00 00 00 00 00 00 00 00 00 04:25:13.634 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 04:25:13.399 IDENTIFY DEVICE + 60 01 00 00 10 00 00 00 3f ff 80 40 00 04:25:12.463 READ FPDMA QUEUED + +Error 7 [6] occurred at disk power-on lifetime: 909 hours (37 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 3f fd e0 40 00 Error: UNC at LBA = 0x003ffde0 = 4193760 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 00 3f fd 80 40 00 04:07:05.476 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 3f ff 80 40 00 04:07:05.474 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 40 02 80 40 00 04:07:05.473 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 40 02 80 40 00 04:07:05.471 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 3f fc 80 40 00 04:07:05.470 READ FPDMA QUEUED + +Error 6 [5] occurred at disk power-on lifetime: 907 hours (37 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 00 00 00 e0 40 00 Error: UNC at LBA = 0x000000e0 = 224 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 00 00 00 00 80 40 00 02:40:16.417 READ FPDMA QUEUED + ec 00 00 00 00 00 00 00 00 00 00 00 00 02:40:16.416 IDENTIFY DEVICE + 60 01 00 00 10 00 02 ba a0 f3 80 40 00 02:40:15.546 READ FPDMA QUEUED + 60 01 00 00 08 00 00 00 3f ff 80 40 00 02:40:15.546 READ FPDMA QUEUED + 60 01 00 00 00 00 02 ba a0 f3 80 40 00 02:40:15.546 READ FPDMA QUEUED + +Error 5 [4] occurred at disk power-on lifetime: 907 hours (37 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 02 ba a0 f1 70 40 00 Error: UNC at LBA = 0x2baa0f170 = 11721044336 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 00 00 02 ba a0 f0 80 40 00 02:28:41.406 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 3f fc 80 40 00 02:28:41.405 READ FPDMA QUEUED + 60 01 00 00 00 00 02 ba a0 f1 80 40 00 02:28:41.404 READ FPDMA QUEUED + 60 01 00 00 00 00 02 ba a0 f1 00 40 00 02:28:41.402 READ FPDMA QUEUED + 60 01 00 00 00 00 00 00 40 03 80 40 00 02:28:41.401 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 25888 - +# 2 Short offline Completed without error 00% 25887 - +# 3 Short offline Completed without error 00% 25886 - +# 4 Short offline Completed without error 00% 25885 - +# 5 Short offline Completed without error 00% 25884 - +# 6 Short offline Completed without error 00% 25884 - +# 7 Short offline Completed without error 00% 25882 - +# 8 Short offline Completed without error 00% 25881 - +# 9 Short offline Completed without error 00% 25881 - +#10 Short offline Completed without error 00% 25880 - +#11 Short offline Completed without error 00% 25879 - +#12 Short offline Completed without error 00% 25878 - +#13 Short offline Completed without error 00% 25876 - +#14 Short offline Completed without error 00% 25876 - +#15 Short offline Completed without error 00% 25875 - +#16 Short offline Completed without error 00% 25874 - +#17 Short offline Completed without error 00% 25872 - +#18 Short offline Completed without error 00% 25869 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 30/39 Celsius +Lifetime Min/Max Temperature: 17/39 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (154) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14786565 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/03256901EFA8 b/HDD/WDC/WD60/WD60EFRX-68L0BN1/03256901EFA8 new file mode 100644 index 000000000..ed4e77b90 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/03256901EFA8 @@ -0,0 +1,196 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:16 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6344) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 717) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 197 021 - 9108 + 4 Start_Stop_Count -O--CK 100 100 000 - 44 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 067 067 000 - 24784 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 44 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 42 +193 Load_Cycle_Count -O--CK 200 200 000 - 962 +194 Temperature_Celsius -O---K 119 111 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 24695 - +# 2 Short offline Completed without error 00% 24694 - +# 3 Short offline Completed without error 00% 24693 - +# 4 Short offline Completed without error 00% 24692 - +# 5 Short offline Completed without error 00% 24691 - +# 6 Short offline Completed without error 00% 24691 - +# 7 Short offline Completed without error 00% 24689 - +# 8 Short offline Completed without error 00% 24688 - +# 9 Short offline Completed without error 00% 24687 - +#10 Short offline Completed without error 00% 24686 - +#11 Short offline Completed without error 00% 24685 - +#12 Short offline Completed without error 00% 24684 - +#13 Short offline Completed without error 00% 24683 - +#14 Short offline Completed without error 00% 24682 - +#15 Short offline Completed without error 00% 24682 - +#16 Short offline Completed without error 00% 24681 - +#17 Short offline Completed without error 00% 24679 - +#18 Short offline Completed without error 00% 24676 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 31/41 Celsius +Lifetime Min/Max Temperature: 25/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (164) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14786673 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/07FAA7B44982 b/HDD/WDC/WD60/WD60EFRX-68L0BN1/07FAA7B44982 new file mode 100644 index 000000000..ce6e44b6c --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/07FAA7B44982 @@ -0,0 +1,194 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:17 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6824) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 722) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 198 198 021 - 9100 + 4 Start_Stop_Count -O--CK 100 100 000 - 43 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 067 067 000 - 24783 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 43 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 41 +193 Load_Cycle_Count -O--CK 200 200 000 - 952 +194 Temperature_Celsius -O---K 119 111 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 24695 - +# 2 Short offline Completed without error 00% 24694 - +# 3 Short offline Completed without error 00% 24693 - +# 4 Short offline Completed without error 00% 24692 - +# 5 Short offline Completed without error 00% 24691 - +# 6 Short offline Completed without error 00% 24690 - +# 7 Short offline Completed without error 00% 24689 - +# 8 Short offline Completed without error 00% 24688 - +# 9 Short offline Completed without error 00% 24687 - +#10 Short offline Completed without error 00% 24686 - +#11 Short offline Completed without error 00% 24685 - +#12 Short offline Completed without error 00% 24684 - +#13 Short offline Completed without error 00% 24683 - +#14 Short offline Completed without error 00% 24682 - +#15 Short offline Completed without error 00% 24682 - +#16 Short offline Completed without error 00% 24680 - +#17 Short offline Completed without error 00% 24675 - +#18 Short offline Completed without error 00% 24674 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 31/39 Celsius +Lifetime Min/Max Temperature: 17/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (147) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 93 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14786595 Vendor specific + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/17D3CF8C9752 b/HDD/WDC/WD60/WD60EFRX-68L0BN1/17D3CF8C9752 new file mode 100644 index 000000000..a655d6ec1 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/17D3CF8C9752 @@ -0,0 +1,196 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:16 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6824) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 722) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 198 197 021 - 9100 + 4 Start_Stop_Count -O--CK 100 100 000 - 43 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 067 067 000 - 24784 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 43 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 41 +193 Load_Cycle_Count -O--CK 200 200 000 - 934 +194 Temperature_Celsius -O---K 119 112 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 24695 - +# 2 Short offline Completed without error 00% 24694 - +# 3 Short offline Completed without error 00% 24693 - +# 4 Short offline Completed without error 00% 24692 - +# 5 Short offline Completed without error 00% 24691 - +# 6 Short offline Completed without error 00% 24691 - +# 7 Short offline Completed without error 00% 24689 - +# 8 Short offline Completed without error 00% 24688 - +# 9 Short offline Completed without error 00% 24687 - +#10 Short offline Completed without error 00% 24686 - +#11 Short offline Completed without error 00% 24686 - +#12 Short offline Completed without error 00% 24683 - +#13 Short offline Completed without error 00% 24683 - +#14 Short offline Completed without error 00% 24682 - +#15 Short offline Completed without error 00% 24681 - +#16 Short offline Completed without error 00% 24676 - +#17 Short offline Completed without error 00% 24675 - +#18 Short offline Completed without error 00% 24527 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 31/40 Celsius +Lifetime Min/Max Temperature: 17/40 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (170) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 37 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14786700 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/2966196B7B58 b/HDD/WDC/WD60/WD60EFRX-68L0BN1/2966196B7B58 new file mode 100644 index 000000000..f7c076ca9 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/2966196B7B58 @@ -0,0 +1,196 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:16 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 7424) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 727) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 197 021 - 9133 + 4 Start_Stop_Count -O--CK 100 100 000 - 43 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 065 065 000 - 25977 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 43 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 41 +193 Load_Cycle_Count -O--CK 200 200 000 - 939 +194 Temperature_Celsius -O---K 119 111 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 25888 - +# 2 Short offline Completed without error 00% 25887 - +# 3 Short offline Completed without error 00% 25886 - +# 4 Short offline Completed without error 00% 25885 - +# 5 Short offline Completed without error 00% 25884 - +# 6 Short offline Completed without error 00% 25884 - +# 7 Short offline Completed without error 00% 25882 - +# 8 Short offline Completed without error 00% 25881 - +# 9 Short offline Completed without error 00% 25880 - +#10 Short offline Completed without error 00% 25879 - +#11 Short offline Completed without error 00% 25879 - +#12 Short offline Completed without error 00% 25877 - +#13 Short offline Completed without error 00% 25876 - +#14 Short offline Completed without error 00% 25876 - +#15 Short offline Completed without error 00% 25875 - +#16 Short offline Completed without error 00% 25874 - +#17 Short offline Completed without error 00% 25869 - +#18 Short offline Completed without error 00% 25868 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 31/40 Celsius +Lifetime Min/Max Temperature: 17/41 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (168) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 43 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14786607 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/384030D69613 b/HDD/WDC/WD60/WD60EFRX-68L0BN1/384030D69613 new file mode 100644 index 000000000..6bc72c978 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/384030D69613 @@ -0,0 +1,196 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:14 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6524) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 719) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 197 021 - 9108 + 4 Start_Stop_Count -O--CK 100 100 000 - 43 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 067 067 000 - 24535 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 43 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 41 +193 Load_Cycle_Count -O--CK 200 200 000 - 930 +194 Temperature_Celsius -O---K 120 112 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 24447 - +# 2 Short offline Completed without error 00% 24446 - +# 3 Short offline Completed without error 00% 24445 - +# 4 Short offline Completed without error 00% 24444 - +# 5 Short offline Completed without error 00% 24443 - +# 6 Short offline Completed without error 00% 24442 - +# 7 Short offline Completed without error 00% 24441 - +# 8 Short offline Completed without error 00% 24440 - +# 9 Short offline Completed without error 00% 24439 - +#10 Short offline Completed without error 00% 24438 - +#11 Short offline Completed without error 00% 24437 - +#12 Short offline Completed without error 00% 24436 - +#13 Short offline Completed without error 00% 24435 - +#14 Short offline Completed without error 00% 24434 - +#15 Short offline Completed without error 00% 24432 - +#16 Short offline Completed without error 00% 24431 - +#17 Short offline Completed without error 00% 24427 - +#18 Short offline Completed without error 00% 24426 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 32/40 Celsius +Lifetime Min/Max Temperature: 17/40 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (67) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 93 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14786765 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/39983ACBE586 b/HDD/WDC/WD60/WD60EFRX-68L0BN1/39983ACBE586 new file mode 100644 index 000000000..5b55d8692 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/39983ACBE586 @@ -0,0 +1,196 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:14 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 6344) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 717) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 197 021 - 9108 + 4 Start_Stop_Count -O--CK 100 100 000 - 43 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 065 065 000 - 25977 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 43 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 41 +193 Load_Cycle_Count -O--CK 200 200 000 - 960 +194 Temperature_Celsius -O---K 120 113 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 25888 - +# 2 Short offline Completed without error 00% 25887 - +# 3 Short offline Completed without error 00% 25886 - +# 4 Short offline Completed without error 00% 25885 - +# 5 Short offline Completed without error 00% 25884 - +# 6 Short offline Completed without error 00% 25884 - +# 7 Short offline Completed without error 00% 25882 - +# 8 Short offline Completed without error 00% 25881 - +# 9 Short offline Completed without error 00% 25880 - +#10 Short offline Completed without error 00% 25879 - +#11 Short offline Completed without error 00% 25879 - +#12 Short offline Completed without error 00% 25877 - +#13 Short offline Completed without error 00% 25876 - +#14 Short offline Completed without error 00% 25875 - +#15 Short offline Completed without error 00% 25875 - +#16 Short offline Completed without error 00% 25874 - +#17 Short offline Completed without error 00% 25872 - +#18 Short offline Completed without error 00% 25869 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 31/39 Celsius +Lifetime Min/Max Temperature: 16/39 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (167) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 92 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14786703 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/400862ABD99C b/HDD/WDC/WD60/WD60EFRX-68L0BN1/400862ABD99C new file mode 100644 index 000000000..edcd399b7 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/400862ABD99C @@ -0,0 +1,121 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 19 09:55:45 2020 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status command failed: Input/output error +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 3164) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 685) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 222 197 021 - 7858 + 4 Start_Stop_Count -O--CK 100 100 000 - 12 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 42 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 11 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 +193 Load_Cycle_Count -O--CK 200 200 000 - 16 +194 Temperature_Celsius -O---K 115 105 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: Input/output error +Read GP Log Directory failed + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +Read SMART Error Log failed: Input/output error + +SMART Extended Self-test Log (GP Log 0x07) not supported + +Read SMART Self-test Log failed: Input/output error + +Read SMART Selective Self-test Log failed: Input/output error + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: Input/output error +Read SATA Phy Event Counters failed + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/59866223177E b/HDD/WDC/WD60/WD60EFRX-68L0BN1/59866223177E new file mode 100644 index 000000000..221dc958a --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/59866223177E @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:10 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2804) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 682) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 192 182 021 - 9358 + 4 Start_Stop_Count -O--CK 100 100 000 - 166 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 042 042 000 - 42696 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 166 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 142 +193 Load_Cycle_Count -O--CK 198 198 000 - 8838 +194 Temperature_Celsius -O---K 115 098 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 40 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12312 - +# 2 Short offline Completed without error 00% 12288 - +# 3 Short offline Completed without error 00% 12264 - +# 4 Extended offline Completed without error 00% 12254 - +# 5 Short offline Completed without error 00% 12240 - +# 6 Short offline Completed without error 00% 12216 - +# 7 Short offline Completed without error 00% 12192 - +# 8 Short offline Completed without error 00% 12168 - +# 9 Short offline Completed without error 00% 12144 - +#10 Short offline Completed without error 00% 12120 - +#11 Extended offline Completed without error 00% 12096 - +#12 Short offline Completed without error 00% 12072 - +#13 Short offline Completed without error 00% 12048 - +#14 Short offline Completed without error 00% 12024 - +#15 Short offline Completed without error 00% 12000 - +#16 Short offline Completed without error 00% 11976 - +#17 Short offline Completed without error 00% 11952 - +#18 Extended offline Completed without error 00% 11938 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 33/38 Celsius +Lifetime Min/Max Temperature: 2/54 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (327) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 267 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1591642 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/62E52102476C b/HDD/WDC/WD60/WD60EFRX-68L0BN1/62E52102476C new file mode 100644 index 000000000..8184eac9b --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/62E52102476C @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:10 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1064) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 665) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 205 196 021 - 8725 + 4 Start_Stop_Count -O--CK 100 100 000 - 166 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 042 042 000 - 42695 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 166 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 139 +193 Load_Cycle_Count -O--CK 188 188 000 - 38320 +194 Temperature_Celsius -O---K 114 097 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 4 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 40 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 21999 hours (916 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 01 a1 8e 4f 10 40 00 Error: UNC at LBA = 0x1a18e4f10 = 7005425424 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 40 00 10 00 01 a1 8e 4f 10 40 00 43d+06:24:31.354 READ FPDMA QUEUED + 60 00 38 00 08 00 01 9b 2f 7f e0 40 00 43d+06:24:31.354 READ FPDMA QUEUED + 60 00 30 00 00 00 01 88 25 67 50 40 00 43d+06:24:31.354 READ FPDMA QUEUED + 60 00 40 00 10 00 01 a1 8e 4e d0 40 00 43d+06:24:31.348 READ FPDMA QUEUED + 60 00 38 00 08 00 01 a1 8e 4e 98 40 00 43d+06:24:31.347 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12312 - +# 2 Short offline Completed without error 00% 12288 - +# 3 Short offline Completed without error 00% 12264 - +# 4 Extended offline Completed without error 00% 12253 - +# 5 Short offline Completed without error 00% 12240 - +# 6 Short offline Completed without error 00% 12216 - +# 7 Short offline Completed without error 00% 12192 - +# 8 Short offline Completed without error 00% 12167 - +# 9 Short offline Completed without error 00% 12143 - +#10 Short offline Completed without error 00% 12119 - +#11 Extended offline Completed without error 00% 12096 - +#12 Short offline Completed without error 00% 12072 - +#13 Short offline Completed without error 00% 12047 - +#14 Short offline Completed without error 00% 12023 - +#15 Short offline Completed without error 00% 12000 - +#16 Short offline Completed without error 00% 11976 - +#17 Short offline Completed without error 00% 11952 - +#18 Extended offline Completed without error 00% 11937 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 35/39 Celsius +Lifetime Min/Max Temperature: 2/55 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (251) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 247 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1591609 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/6B93295A6940 b/HDD/WDC/WD60/WD60EFRX-68L0BN1/6B93295A6940 new file mode 100644 index 000000000..8d1bd5fc3 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/6B93295A6940 @@ -0,0 +1,196 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:16 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 8144) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 735) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 197 021 - 9108 + 4 Start_Stop_Count -O--CK 100 100 000 - 44 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 067 067 000 - 24784 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 44 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 42 +193 Load_Cycle_Count -O--CK 200 200 000 - 963 +194 Temperature_Celsius -O---K 122 113 000 - 30 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 24695 - +# 2 Short offline Completed without error 00% 24694 - +# 3 Short offline Completed without error 00% 24693 - +# 4 Short offline Completed without error 00% 24692 - +# 5 Short offline Completed without error 00% 24691 - +# 6 Short offline Completed without error 00% 24691 - +# 7 Short offline Completed without error 00% 24689 - +# 8 Short offline Completed without error 00% 24688 - +# 9 Short offline Completed without error 00% 24687 - +#10 Short offline Completed without error 00% 24686 - +#11 Short offline Completed without error 00% 24685 - +#12 Short offline Completed without error 00% 24683 - +#13 Short offline Completed without error 00% 24683 - +#14 Short offline Completed without error 00% 24682 - +#15 Short offline Completed without error 00% 24681 - +#16 Short offline Completed without error 00% 24676 - +#17 Short offline Completed without error 00% 24675 - +#18 Short offline Completed without error 00% 24526 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 29/39 Celsius +Lifetime Min/Max Temperature: 17/39 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (168) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14786616 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/840C460E9380 b/HDD/WDC/WD60/WD60EFRX-68L0BN1/840C460E9380 new file mode 100644 index 000000000..6277991b7 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/840C460E9380 @@ -0,0 +1,346 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:51:42 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4244) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 696) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 196 196 051 - 164 + 3 Spin_Up_Time POS--K 200 197 021 - 8966 + 4 Start_Stop_Count -O--CK 100 100 000 - 38 + 5 Reallocated_Sector_Ct PO--CK 161 161 140 - 1148 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 082 082 000 - 13159 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 38 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 36 +193 Load_Cycle_Count -O--CK 200 200 000 - 486 +194 Temperature_Celsius -O---K 122 113 000 - 30 +196 Reallocated_Event_Count -O--CK 001 001 000 - 310 +197 Current_Pending_Sector -O--CK 200 200 000 - 25 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 122 (device log contains only the most recent 24 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 122 [1] occurred at disk power-on lifetime: 11202 hours (466 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 61 12 c3 18 40 00 Error: WP at LBA = 0x6112c318 = 1628619544 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 28 00 02 ba a0 f0 40 40 00 05:33:50.493 WRITE FPDMA QUEUED + 61 00 08 00 20 00 00 00 40 02 40 40 00 05:33:50.493 WRITE FPDMA QUEUED + 61 00 08 00 18 00 02 ba a0 f2 40 40 00 05:33:50.493 WRITE FPDMA QUEUED + 61 00 08 00 10 00 00 00 40 04 40 40 00 05:33:50.493 WRITE FPDMA QUEUED + 60 00 20 00 08 00 00 61 12 ca d8 40 00 05:33:50.493 READ FPDMA QUEUED + +Error 121 [0] occurred at disk power-on lifetime: 11202 hours (466 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 61 12 b5 c0 40 00 Error: WP at LBA = 0x6112b5c0 = 1628616128 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 20 00 20 00 00 61 12 a8 98 40 00 05:33:44.539 WRITE FPDMA QUEUED + 61 00 20 00 18 00 00 61 12 a8 50 40 00 05:33:44.539 WRITE FPDMA QUEUED + 61 00 20 00 10 00 00 61 12 a8 f8 40 00 05:33:44.538 WRITE FPDMA QUEUED + 61 00 20 00 08 00 00 61 12 a7 f0 40 00 05:33:44.538 WRITE FPDMA QUEUED + 61 00 20 00 60 00 00 61 12 a7 48 40 00 05:33:44.538 WRITE FPDMA QUEUED + +Error 120 [23] occurred at disk power-on lifetime: 11202 hours (466 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 61 12 b5 28 40 00 Error: UNC at LBA = 0x6112b528 = 1628615976 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 20 00 38 00 00 61 12 b5 50 40 00 05:33:39.096 READ FPDMA QUEUED + 61 00 08 00 30 00 02 53 d3 e1 50 40 00 05:33:39.096 WRITE FPDMA QUEUED + 61 00 08 00 28 00 02 53 79 88 c0 40 00 05:33:39.096 WRITE FPDMA QUEUED + 61 00 10 00 20 00 02 46 a8 95 f0 40 00 05:33:39.096 WRITE FPDMA QUEUED + 61 00 08 00 18 00 01 a9 cc 0a d0 40 00 05:33:39.096 WRITE FPDMA QUEUED + +Error 119 [22] occurred at disk power-on lifetime: 11202 hours (466 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 61 12 a8 60 40 00 Error: UNC at LBA = 0x6112a860 = 1628612704 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 20 00 30 00 00 61 12 ac e8 40 00 05:33:34.777 READ FPDMA QUEUED + 61 00 08 00 28 00 00 cd 16 9c 58 40 00 05:33:34.777 WRITE FPDMA QUEUED + 60 00 e8 00 20 00 00 61 12 ac 00 40 00 05:33:34.777 READ FPDMA QUEUED + 60 01 00 00 18 00 00 61 12 ab 00 40 00 05:33:34.775 READ FPDMA QUEUED + 60 01 00 00 10 00 00 61 12 aa 00 40 00 05:33:34.775 READ FPDMA QUEUED + +Error 118 [21] occurred at disk power-on lifetime: 11202 hours (466 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 61 12 a7 d8 40 00 Error: UNC at LBA = 0x6112a7d8 = 1628612568 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 20 00 00 00 00 61 12 ac e8 40 00 05:33:30.469 READ FPDMA QUEUED + 61 00 08 00 40 00 00 cd 16 9c 58 40 00 05:33:30.468 WRITE FPDMA QUEUED + 60 00 e8 00 38 00 00 61 12 ac 00 40 00 05:33:30.468 READ FPDMA QUEUED + 60 01 00 00 30 00 00 61 12 ab 00 40 00 05:33:30.468 READ FPDMA QUEUED + 60 01 00 00 28 00 00 61 12 aa 00 40 00 05:33:30.468 READ FPDMA QUEUED + +Error 117 [20] occurred at disk power-on lifetime: 11202 hours (466 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 61 12 9a f8 40 00 Error: WP at LBA = 0x61129af8 = 1628609272 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 10 00 10 00 02 ba a0 f0 90 40 00 05:33:24.955 WRITE FPDMA QUEUED + 61 00 10 00 08 00 02 ba a0 ee 90 40 00 05:33:24.954 WRITE FPDMA QUEUED + 61 00 10 00 00 00 00 80 5b 7a 48 40 00 05:33:24.954 WRITE FPDMA QUEUED + 60 00 08 00 90 00 00 61 12 a2 b8 40 00 05:33:24.939 READ FPDMA QUEUED + 60 01 00 00 88 00 00 61 12 a1 b8 40 00 05:33:24.939 READ FPDMA QUEUED + +Error 116 [19] occurred at disk power-on lifetime: 11202 hours (466 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 61 12 8d 90 40 00 Error: UNC at LBA = 0x61128d90 = 1628605840 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 70 00 00 61 12 9d b8 40 00 05:33:20.485 READ FPDMA QUEUED + 60 01 00 00 68 00 00 61 12 9c b8 40 00 05:33:20.485 READ FPDMA QUEUED + 60 01 00 00 60 00 00 61 12 9b b8 40 00 05:33:20.485 READ FPDMA QUEUED + 61 00 10 00 58 00 00 20 5a c5 08 40 00 05:33:20.485 WRITE FPDMA QUEUED + 60 00 10 00 50 00 02 ba a0 f0 90 40 00 05:33:20.485 READ FPDMA QUEUED + +Error 115 [18] occurred at disk power-on lifetime: 11202 hours (466 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 61 12 9a 88 40 00 Error: UNC at LBA = 0x61129a88 = 1628609160 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 88 00 00 61 12 8f 90 40 00 05:33:15.607 READ FPDMA QUEUED + 60 01 00 00 80 00 00 61 12 8e 90 40 00 05:33:15.607 READ FPDMA QUEUED + 60 01 00 00 78 00 00 61 12 8d 90 40 00 05:33:15.607 READ FPDMA QUEUED + 60 00 08 00 70 00 00 61 12 a2 b8 40 00 05:33:15.607 READ FPDMA QUEUED + 60 01 00 00 68 00 00 61 12 a1 b8 40 00 05:33:15.607 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed: read failure 80% 12473 1624842592 +# 2 Extended offline Completed: read failure 80% 11866 1624849432 +# 3 Short offline Completed without error 00% 11865 - +# 4 Short offline Completed without error 00% 11800 - +# 5 Short offline Completed without error 00% 11799 - +# 6 Short offline Completed without error 00% 11798 - +# 7 Short offline Completed without error 00% 11797 - +# 8 Short offline Completed without error 00% 11796 - +# 9 Short offline Completed without error 00% 11795 - +#10 Short offline Completed without error 00% 11794 - +#11 Short offline Completed without error 00% 11793 - +#12 Short offline Completed without error 00% 11792 - +#13 Short offline Completed without error 00% 11791 - +#14 Short offline Completed without error 00% 11790 - +#15 Short offline Completed without error 00% 11789 - +#16 Short offline Completed without error 00% 11788 - +#17 Short offline Completed without error 00% 11787 - +#18 Short offline Completed without error 00% 11786 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 26/36 Celsius +Lifetime Min/Max Temperature: 17/39 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (246) + +SCT Error Recovery Control: + Read: 1 (0.1 seconds) + Write: 1 (0.1 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14816767 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/84179213200B b/HDD/WDC/WD60/WD60EFRX-68L0BN1/84179213200B new file mode 100644 index 000000000..f84574abe --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/84179213200B @@ -0,0 +1,345 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:09 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 3164) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 685) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 204 193 021 - 8791 + 4 Start_Stop_Count -O--CK 100 100 000 - 160 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 042 042 000 - 42697 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 160 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 135 +193 Load_Cycle_Count -O--CK 198 198 000 - 8974 +194 Temperature_Celsius -O---K 114 098 000 - 38 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 40 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 18 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 18 [17] occurred at disk power-on lifetime: 38066 hours (1586 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 02 ba a0 b2 70 40 00 Error: UNC at LBA = 0x2baa0b270 = 11721028208 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 e0 00 00 00 02 ba a0 b2 20 40 00 00:02:10.704 READ FPDMA QUEUED + 60 00 e0 00 00 00 02 ba a0 b0 20 40 00 00:02:10.674 READ FPDMA QUEUED + 60 00 e0 00 00 00 00 01 40 06 20 40 00 00:02:10.672 READ FPDMA QUEUED + 60 00 e0 00 00 00 00 01 40 04 20 40 00 00:02:10.663 READ FPDMA QUEUED + 61 00 10 00 00 00 00 01 40 06 10 40 00 00:02:10.662 WRITE FPDMA QUEUED + +Error 17 [16] occurred at disk power-on lifetime: 38066 hours (1586 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 01 40 06 10 40 00 Error: WP at LBA = 0x01400610 = 20973072 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 10 00 10 00 02 ba a0 b2 10 40 00 00:02:06.256 WRITE FPDMA QUEUED + 61 00 10 00 08 00 02 ba a0 b0 10 40 00 00:02:06.256 WRITE FPDMA QUEUED + 60 00 10 00 10 00 02 ba a0 b2 10 40 00 00:02:06.255 READ FPDMA QUEUED + 60 00 10 00 08 00 02 ba a0 b0 10 40 00 00:02:06.255 READ FPDMA QUEUED + 60 00 10 00 00 00 00 01 40 06 10 40 00 00:02:06.255 READ FPDMA QUEUED + +Error 16 [15] occurred at disk power-on lifetime: 38066 hours (1586 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 02 ba a0 b2 70 40 00 Error: UNC at LBA = 0x2baa0b270 = 11721028208 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 e0 00 00 00 02 ba a0 b2 20 40 00 00:02:02.233 READ FPDMA QUEUED + 60 00 e0 00 00 00 02 ba a0 b0 20 40 00 00:02:02.203 READ FPDMA QUEUED + 60 00 e0 00 00 00 00 01 40 06 20 40 00 00:02:02.181 READ FPDMA QUEUED + 60 00 e0 00 00 00 00 01 40 04 20 40 00 00:02:02.166 READ FPDMA QUEUED + 61 00 10 00 00 00 02 ba a0 b2 10 40 00 00:02:02.165 WRITE FPDMA QUEUED + +Error 15 [14] occurred at disk power-on lifetime: 38066 hours (1586 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 01 40 06 10 40 00 Error: WP at LBA = 0x01400610 = 20973072 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 10 00 10 00 02 ba a0 b2 10 40 00 00:01:58.232 WRITE FPDMA QUEUED + 61 00 10 00 08 00 02 ba a0 b0 10 40 00 00:01:58.231 WRITE FPDMA QUEUED + 60 00 10 00 10 00 02 ba a0 b2 10 40 00 00:01:58.231 READ FPDMA QUEUED + 60 00 10 00 08 00 02 ba a0 b0 10 40 00 00:01:58.231 READ FPDMA QUEUED + 60 00 10 00 00 00 00 01 40 06 10 40 00 00:01:58.231 READ FPDMA QUEUED + +Error 14 [13] occurred at disk power-on lifetime: 38066 hours (1586 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 01 40 06 10 40 00 Error: UNC at LBA = 0x01400610 = 20973072 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 10 00 02 ba a0 b2 10 40 00 00:01:53.882 READ FPDMA QUEUED + 60 00 10 00 08 00 02 ba a0 b0 10 40 00 00:01:53.882 READ FPDMA QUEUED + 60 00 10 00 00 00 00 01 40 06 10 40 00 00:01:53.882 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:53.881 READ LOG EXT + 60 00 e0 00 00 00 02 ba a0 b2 20 40 00 00:01:49.859 READ FPDMA QUEUED + +Error 13 [12] occurred at disk power-on lifetime: 38066 hours (1586 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 02 ba a0 b2 70 40 00 Error: UNC at LBA = 0x2baa0b270 = 11721028208 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 e0 00 00 00 02 ba a0 b2 20 40 00 00:01:49.859 READ FPDMA QUEUED + 60 00 e0 00 00 00 02 ba a0 b0 20 40 00 00:01:49.830 READ FPDMA QUEUED + 60 00 e0 00 00 00 00 01 40 06 20 40 00 00:01:49.807 READ FPDMA QUEUED + 60 00 e0 00 00 00 00 01 40 04 20 40 00 00:01:49.803 READ FPDMA QUEUED + 61 00 10 00 00 00 02 ba a0 b2 10 40 00 00:01:49.802 WRITE FPDMA QUEUED + +Error 12 [11] occurred at disk power-on lifetime: 38066 hours (1586 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 01 40 06 10 40 00 Error: WP at LBA = 0x01400610 = 20973072 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 10 00 08 00 02 ba a0 b2 10 40 00 00:01:45.937 WRITE FPDMA QUEUED + 61 00 10 00 08 00 02 ba a0 b0 10 40 00 00:01:45.935 WRITE FPDMA QUEUED + 60 00 10 00 10 00 02 ba a0 b2 10 40 00 00:01:45.929 READ FPDMA QUEUED + 60 00 10 00 08 00 02 ba a0 b0 10 40 00 00:01:45.929 READ FPDMA QUEUED + 60 00 10 00 00 00 00 01 40 06 10 40 00 00:01:45.929 READ FPDMA QUEUED + +Error 11 [10] occurred at disk power-on lifetime: 38066 hours (1586 days + 2 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 01 40 06 10 40 00 Error: UNC at LBA = 0x01400610 = 20973072 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 10 00 02 ba a0 b2 10 40 00 00:01:38.210 READ FPDMA QUEUED + 60 00 10 00 08 00 02 ba a0 b0 10 40 00 00:01:38.210 READ FPDMA QUEUED + 60 00 10 00 00 00 00 01 40 06 10 40 00 00:01:38.210 READ FPDMA QUEUED + 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:38.209 READ LOG EXT + 60 00 e0 00 00 00 02 ba a0 b2 20 40 00 00:01:33.771 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12312 - +# 2 Short offline Completed without error 00% 12288 - +# 3 Short offline Completed without error 00% 12264 - +# 4 Extended offline Completed without error 00% 12254 - +# 5 Short offline Completed without error 00% 12240 - +# 6 Short offline Completed without error 00% 12216 - +# 7 Short offline Completed without error 00% 12192 - +# 8 Short offline Completed without error 00% 12168 - +# 9 Short offline Completed without error 00% 12144 - +#10 Short offline Completed without error 00% 12120 - +#11 Extended offline Completed without error 00% 12097 - +#12 Short offline Completed without error 00% 12072 - +#13 Short offline Completed without error 00% 12048 - +#14 Short offline Completed without error 00% 12024 - +#15 Short offline Completed without error 00% 12000 - +#16 Short offline Completed without error 00% 11976 - +#17 Short offline Completed without error 00% 11952 - +#18 Extended offline Completed without error 00% 11939 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 35/40 Celsius +Lifetime Min/Max Temperature: 35/54 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (338) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 181 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1591651 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/8ACB88C55BDD b/HDD/WDC/WD60/WD60EFRX-68L0BN1/8ACB88C55BDD new file mode 100644 index 000000000..0b5ec09f2 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/8ACB88C55BDD @@ -0,0 +1,222 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:16 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 3164) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 685) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 197 021 - 9133 + 4 Start_Stop_Count -O--CK 100 100 000 - 11 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 081 081 000 - 14112 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 11 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 9 +193 Load_Cycle_Count -O--CK 200 200 000 - 490 +194 Temperature_Celsius -O---K 123 113 000 - 29 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 5824 - +# 2 Short offline Completed without error 00% 5811 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 28/39 Celsius +Lifetime Min/Max Temperature: 24/39 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (103) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 11 --- Lifetime Power-On Resets +0x01 0x010 4 14112 --- Power-on Hours +0x01 0x018 6 37942079927 --- Logical Sectors Written +0x01 0x020 6 1549777473 --- Number of Write Commands +0x01 0x028 6 102646954004 --- Logical Sectors Read +0x01 0x030 6 643717787 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 14036 --- Spindle Motor Power-on Hours +0x03 0x010 4 14030 --- Head Flying Hours +0x03 0x018 4 500 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 90 --- Number of Hardware Resets +0x06 0x010 4 57 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14786911 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/A1BBF730792D b/HDD/WDC/WD60/WD60EFRX-68L0BN1/A1BBF730792D new file mode 100644 index 000000000..1e82ed092 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/A1BBF730792D @@ -0,0 +1,243 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:09 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1544) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 669) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 200 190 021 - 8983 + 4 Start_Stop_Count -O--CK 100 100 000 - 156 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 042 042 000 - 42649 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 156 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 134 +193 Load_Cycle_Count -O--CK 189 189 000 - 33320 +194 Temperature_Celsius -O---K 115 098 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 40 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 2 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2 [1] occurred at disk power-on lifetime: 30018 hours (1250 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 02 04 03 c6 b0 40 00 Error: UNC at LBA = 0x20403c6b0 = 8657290928 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 40 00 00 00 02 03 f5 03 a8 40 00 00:01:17.284 READ FPDMA QUEUED + 60 00 08 00 08 00 01 68 15 96 60 40 00 00:01:17.252 READ FPDMA QUEUED + 60 00 08 00 60 00 01 68 0f ab c8 40 00 00:01:17.246 READ FPDMA QUEUED + 60 00 08 00 00 00 01 67 ec 8e a8 40 00 00:01:17.242 READ FPDMA QUEUED + 60 00 08 00 08 00 01 67 1e fc 90 40 00 00:01:17.231 READ FPDMA QUEUED + +Error 1 [0] occurred at disk power-on lifetime: 24351 hours (1014 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 08 8d a2 58 40 00 Error: UNC at LBA = 0x088da258 = 143499864 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 10 00 00 08 8d a3 58 40 00 34d+15:54:35.498 READ FPDMA QUEUED + 60 01 00 00 08 00 00 08 8d a2 58 40 00 34d+15:54:35.498 READ FPDMA QUEUED + 60 00 40 00 00 00 02 5e 52 0e 10 40 00 34d+15:54:35.498 READ FPDMA QUEUED + 60 00 40 00 08 00 00 08 8d a2 18 40 00 34d+15:54:35.491 READ FPDMA QUEUED + 60 00 80 00 00 00 00 08 8d a1 98 40 00 34d+15:54:35.490 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12265 - +# 2 Short offline Completed without error 00% 12241 - +# 3 Short offline Completed without error 00% 12217 - +# 4 Extended offline Completed without error 00% 12207 - +# 5 Short offline Completed without error 00% 12193 - +# 6 Short offline Completed without error 00% 12169 - +# 7 Short offline Completed without error 00% 12145 - +# 8 Short offline Completed without error 00% 12121 - +# 9 Short offline Completed without error 00% 12097 - +#10 Short offline Completed without error 00% 12073 - +#11 Extended offline Completed without error 00% 12049 - +#12 Short offline Completed without error 00% 12025 - +#13 Short offline Completed without error 00% 12001 - +#14 Short offline Completed without error 00% 11977 - +#15 Short offline Completed without error 00% 11953 - +#16 Short offline Completed without error 00% 11929 - +#17 Short offline Completed without error 00% 11905 - +#18 Extended offline Completed without error 00% 11891 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 33/38 Celsius +Lifetime Min/Max Temperature: 2/54 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (374) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 204 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1591627 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/F85BFD476D6E b/HDD/WDC/WD60/WD60EFRX-68L0BN1/F85BFD476D6E new file mode 100644 index 000000000..6e3ee2e36 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/F85BFD476D6E @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:10 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4064) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 694) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 187 021 - 9141 + 4 Start_Stop_Count -O--CK 100 100 000 - 166 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 042 042 000 - 42696 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 165 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 142 +193 Load_Cycle_Count -O--CK 188 188 000 - 38533 +194 Temperature_Celsius -O---K 113 098 000 - 39 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 40 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 12312 - +# 2 Short offline Completed without error 00% 12288 - +# 3 Short offline Completed without error 00% 12264 - +# 4 Extended offline Completed without error 00% 12254 - +# 5 Short offline Completed without error 00% 12240 - +# 6 Short offline Completed without error 00% 12216 - +# 7 Short offline Completed without error 00% 12192 - +# 8 Short offline Completed without error 00% 12168 - +# 9 Short offline Completed without error 00% 12144 - +#10 Short offline Completed without error 00% 12120 - +#11 Extended offline Completed without error 00% 12097 - +#12 Short offline Completed without error 00% 12072 - +#13 Short offline Completed without error 00% 12048 - +#14 Short offline Completed without error 00% 12024 - +#15 Short offline Completed without error 00% 12000 - +#16 Short offline Completed without error 00% 11976 - +#17 Short offline Completed without error 00% 11952 - +#18 Extended offline Completed without error 00% 11939 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 35/40 Celsius +Lifetime Min/Max Temperature: 2/54 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (304) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 235 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 1591636 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/F8E9B4E7316F b/HDD/WDC/WD60/WD60EFRX-68L0BN1/F8E9B4E7316F new file mode 100644 index 000000000..b5bcf240a --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/F8E9B4E7316F @@ -0,0 +1,196 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:17 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 3824) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 692) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 197 021 - 9150 + 4 Start_Stop_Count -O--CK 100 100 000 - 43 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 067 067 000 - 24784 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 43 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 41 +193 Load_Cycle_Count -O--CK 200 200 000 - 943 +194 Temperature_Celsius -O---K 120 112 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 24695 - +# 2 Short offline Completed without error 00% 24694 - +# 3 Short offline Completed without error 00% 24693 - +# 4 Short offline Completed without error 00% 24692 - +# 5 Short offline Completed without error 00% 24691 - +# 6 Short offline Completed without error 00% 24691 - +# 7 Short offline Completed without error 00% 24689 - +# 8 Short offline Completed without error 00% 24688 - +# 9 Short offline Completed without error 00% 24687 - +#10 Short offline Completed without error 00% 24686 - +#11 Short offline Completed without error 00% 24685 - +#12 Short offline Completed without error 00% 24684 - +#13 Short offline Completed without error 00% 24683 - +#14 Short offline Completed without error 00% 24682 - +#15 Short offline Completed without error 00% 24682 - +#16 Short offline Completed without error 00% 24681 - +#17 Short offline Completed without error 00% 24679 - +#18 Short offline Completed without error 00% 24676 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 31/40 Celsius +Lifetime Min/Max Temperature: 18/40 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (164) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 42 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 14786639 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EFRX-68L0BN1/F9085192C53B b/HDD/WDC/WD60/WD60EFRX-68L0BN1/F9085192C53B new file mode 100644 index 000000000..222c43d71 --- /dev/null +++ b/HDD/WDC/WD60/WD60EFRX-68L0BN1/F9085192C53B @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD60EFRX-68L0BN1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 82.00A82 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 09:55:44 2020 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4064) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 694) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 229 209 021 - 7516 + 4 Start_Stop_Count -O--CK 100 100 000 - 17 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 084 084 000 - 11955 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 17 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 +193 Load_Cycle_Count -O--CK 197 197 000 - 11546 +194 Temperature_Celsius -O---K 113 106 000 - 39 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 2048 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 38/39 Celsius +Lifetime Min/Max Temperature: 22/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (284) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 17 --- Lifetime Power-On Resets +0x01 0x010 4 11955 --- Power-on Hours +0x01 0x018 6 25326537326 --- Logical Sectors Written +0x01 0x020 6 74308783 --- Number of Write Commands +0x01 0x028 6 6928157891 --- Logical Sectors Read +0x01 0x030 6 426381582 --- Number of Read Commands +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 11950 --- Spindle Motor Power-on Hours +0x03 0x010 4 1981 --- Head Flying Hours +0x03 0x018 4 11557 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 25 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 37 --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 26 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 33 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 233 --- Number of Hardware Resets +0x06 0x010 4 100 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 4502 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/2C106047BD4A b/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/2C106047BD4A new file mode 100644 index 000000000..221ed6455 --- /dev/null +++ b/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/2C106047BD4A @@ -0,0 +1,173 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD60EZRZ-00GZ5B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 4 19:13:02 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2144) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 675) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 196 196 021 - 9166 + 4 Start_Stop_Count -O--CK 100 100 000 - 43 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 085 085 000 - 11386 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 41 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 15 +193 Load_Cycle_Count -O--CK 199 199 000 - 3801 +194 Temperature_Celsius -O---K 119 101 000 - 33 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 31/35 Celsius +Lifetime Min/Max Temperature: 24/51 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (406) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 915197 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/733B6903B2F2 b/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/733B6903B2F2 new file mode 100644 index 000000000..5eeee5028 --- /dev/null +++ b/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/733B6903B2F2 @@ -0,0 +1,173 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD60EZRZ-00GZ5B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 4 19:13:02 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1904) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 673) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 196 196 021 - 9183 + 4 Start_Stop_Count -O--CK 100 100 000 - 53 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 085 085 000 - 11412 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 51 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 24 +193 Load_Cycle_Count -O--CK 200 200 000 - 201 +194 Temperature_Celsius -O---K 120 101 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 31/34 Celsius +Lifetime Min/Max Temperature: 23/51 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (46) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 22 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 915198 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/BB401AF0132E b/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/BB401AF0132E new file mode 100644 index 000000000..36e859c2d --- /dev/null +++ b/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/BB401AF0132E @@ -0,0 +1,173 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD60EZRZ-00GZ5B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 4 19:13:02 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2804) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 682) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 196 021 - 9150 + 4 Start_Stop_Count -O--CK 100 100 000 - 54 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 085 085 000 - 11451 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 24 +193 Load_Cycle_Count -O--CK 200 200 000 - 1039 +194 Temperature_Celsius -O---K 120 103 000 - 32 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 30/34 Celsius +Lifetime Min/Max Temperature: 20/49 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (39) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 22 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 915203 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/C80BF67B4B54 b/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/C80BF67B4B54 new file mode 100644 index 000000000..b30965651 --- /dev/null +++ b/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/C80BF67B4B54 @@ -0,0 +1,173 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD60EZRZ-00GZ5B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 4 19:13:02 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 3164) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 685) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 197 021 - 9133 + 4 Start_Stop_Count -O--CK 100 100 000 - 52 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 085 085 000 - 11399 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 50 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 24 +193 Load_Cycle_Count -O--CK 200 200 000 - 181 +194 Temperature_Celsius -O---K 117 100 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 33/36 Celsius +Lifetime Min/Max Temperature: 23/52 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (227) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 22 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 915197 Vendor specific + + + diff --git a/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/E01E31C2C7E5 b/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/E01E31C2C7E5 new file mode 100644 index 000000000..8d85652a5 --- /dev/null +++ b/HDD/WDC/WD60/WD60EZRZ-00GZ5B1/E01E31C2C7E5 @@ -0,0 +1,173 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Blue +Device Model: WDC WD60EZRZ-00GZ5B1 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 80.00A80 +User Capacity: 6,001,175,126,016 bytes [6.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5700 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 4 19:13:02 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 3344) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 687) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 197 197 021 - 9150 + 4 Start_Stop_Count -O--CK 100 100 000 - 54 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 085 085 000 - 11427 + 10 Spin_Retry_Count -O--CK 100 253 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 52 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 24 +193 Load_Cycle_Count -O--CK 200 200 000 - 307 +194 Temperature_Celsius -O---K 118 101 000 - 34 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 54 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 32/35 Celsius +Lifetime Min/Max Temperature: 21/51 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 478 (13) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 22 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 915201 Vendor specific + + + diff --git a/HDD/WDC/WD6400/WD6400AAKS-00A7B0/6998047A5A0B b/HDD/WDC/WD6400/WD6400AAKS-00A7B0/6998047A5A0B new file mode 100644 index 000000000..a2a3d5eb2 --- /dev/null +++ b/HDD/WDC/WD6400/WD6400AAKS-00A7B0/6998047A5A0B @@ -0,0 +1,181 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Blue (SATA) +Device Model: WDC WD6400AAKS-00A7B0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.03B01 +User Capacity: 640,135,028,736 bytes [640 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Wed Aug 19 16:26:47 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11580) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 136) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x303f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 153 147 021 - 5350 + 4 Start_Stop_Count -O--CK 093 093 000 - 7697 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 051 - 0 + 9 Power_On_Hours -O--CK 041 041 000 - 43662 + 10 Spin_Retry_Count -O--CK 100 100 051 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 051 - 0 + 12 Power_Cycle_Count -O--CK 094 094 000 - 6304 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 749 +193 Load_Cycle_Count -O--CK 198 198 000 - 7678 +194 Temperature_Celsius -O---K 112 095 000 - 35 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 138 +200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 39389 - +# 2 Short offline Completed without error 00% 38424 - +# 3 Short offline Completed without error 00% 37496 - +# 4 Short offline Completed without error 00% 37480 - +# 5 Short offline Completed without error 00% 37465 - +# 6 Short offline Completed without error 00% 37453 - +# 7 Short offline Completed without error 00% 37439 - +# 8 Short offline Completed without error 00% 37426 - +# 9 Extended offline Interrupted (host reset) 90% 37410 - +#10 Short offline Completed without error 00% 37398 - +#11 Short offline Completed without error 00% 37382 - +#12 Short offline Completed without error 00% 37364 - +#13 Short offline Completed without error 00% 37348 - +#14 Short offline Completed without error 00% 36922 - +#15 Short offline Completed without error 00% 36903 - +#16 Short offline Completed without error 00% 36808 - +#17 Short offline Completed without error 00% 36789 - +#18 Short offline Completed without error 00% 36779 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 29/36 Celsius +Lifetime Min/Max Temperature: 29/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (117) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x8000 4 33428 Vendor specific + + + diff --git a/HDD/WDC/WD6400/WD6400AAKS-22A7B2/71E4AAA514C5 b/HDD/WDC/WD6400/WD6400AAKS-22A7B2/71E4AAA514C5 new file mode 100644 index 000000000..8c45899ae --- /dev/null +++ b/HDD/WDC/WD6400/WD6400AAKS-22A7B2/71E4AAA514C5 @@ -0,0 +1,159 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar Blue (SATA) +Device Model: WDC WD6400AAKS-22A7B2 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.03B01 +User Capacity: 640,135,028,736 bytes [640 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.5, 3.0 Gb/s +Local Time is: Sat Jul 4 14:09:23 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (11580) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 136) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x3037) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 11 + 3 Spin_Up_Time POS--K 164 159 021 - 4800 + 4 Start_Stop_Count -O--CK 094 094 000 - 6565 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 + 9 Power_On_Hours -O--CK 086 086 000 - 10727 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 095 095 000 - 5268 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 728 +193 Load_Cycle_Count -O--CK 198 198 000 - 6536 +194 Temperature_Celsius -O---K 119 089 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 200 200 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 24 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Invalid Error Log index = 0x0000 (reserved = 0x00) +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 26/27 Celsius +Lifetime Min/Max Temperature: 26/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (75) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x8000 4 202 Vendor specific + + + diff --git a/HDD/WDC/WD7500/WD7500BMVW-11AJGS4/482E74ED216F b/HDD/WDC/WD7500/WD7500BMVW-11AJGS4/482E74ED216F new file mode 100644 index 000000000..4b3e79cc4 --- /dev/null +++ b/HDD/WDC/WD7500/WD7500BMVW-11AJGS4/482E74ED216F @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Elements / My Passport (USB, AF) +Device Model: WDC WD7500BMVW-11AJGS4 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 23:26:54 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (14280) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 161) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 133 124 021 - 4341 + 4 Start_Stop_Count -O--CK 100 100 000 - 403 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 051 051 000 - 36000 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 8 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 2 +193 Load_Cycle_Count -O--CK 198 198 000 - 6555 +194 Temperature_Celsius -O---K 110 100 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb6 GPL,SL VS 1 Device vendor specific log +0xb7 GPL,SL VS 38 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 31/43 Celsius +Lifetime Min/Max Temperature: 20/47 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (18) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 16 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 2348927 Vendor specific + diff --git a/HDD/WDC/WD7500/WD7500BPKT-00PK4T0/7AF82D9494CD b/HDD/WDC/WD7500/WD7500BPKT-00PK4T0/7AF82D9494CD new file mode 100644 index 000000000..5e41edda2 --- /dev/null +++ b/HDD/WDC/WD7500/WD7500BPKT-00PK4T0/7AF82D9494CD @@ -0,0 +1,93 @@ +smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Black (AF) +Device Model: WDC WD7500BPKT-00PK4T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Oct 19 13:56:03 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12780) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 127) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 194 191 021 Pre-fail Always - 1258 + 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 548 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 764 + 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 548 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 67 +193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6046 +194 Temperature_Celsius 0x0022 100 092 000 Old_age Always - 47 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD7500/WD7500BPKT-75PK4T0/8BED3DE179F6 b/HDD/WDC/WD7500/WD7500BPKT-75PK4T0/8BED3DE179F6 new file mode 100644 index 000000000..a0a523ae2 --- /dev/null +++ b/HDD/WDC/WD7500/WD7500BPKT-75PK4T0/8BED3DE179F6 @@ -0,0 +1,337 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Black (AF) +Device Model: WDC WD7500BPKT-75PK4T0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sun Sep 6 18:50:54 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12900) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 128) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 195 191 021 - 1216 + 4 Start_Stop_Count -O--CK 096 096 000 - 4329 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 079 079 000 - 15652 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 096 096 000 - 4324 +191 G-Sense_Error_Rate -O--CK 001 001 000 - 85717 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 519 +193 Load_Cycle_Count -O--CK 173 173 000 - 81608 +194 Temperature_Celsius -O---K 107 084 000 - 40 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 +240 Head_Flying_Hours -O--CK 080 080 000 - 15087 +241 Total_LBAs_Written -O--CK 200 200 000 - 64434910289 +242 Total_LBAs_Read -O--CK 200 200 000 - 79597180926 +254 Free_Fall_Sensor -O--CK 178 178 000 - 22 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +Device Error Count: 10 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 10 [9] occurred at disk power-on lifetime: 4501 hours (187 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 09 8f 46 90 40 00 Error: WP at LBA = 0x098f4690 = 160384656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 20 00 18 00 00 17 7d 1a 20 40 00 03:30:15.783 WRITE FPDMA QUEUED + 61 00 08 00 10 00 00 00 5f 0e f0 40 00 03:30:15.768 WRITE FPDMA QUEUED + 61 00 08 00 10 00 00 00 5f 0f 00 40 00 03:30:15.767 WRITE FPDMA QUEUED + 60 01 00 00 60 00 00 09 8f 46 20 40 00 03:30:15.767 READ FPDMA QUEUED + 60 01 00 00 58 00 00 09 8f 47 20 40 00 03:30:15.767 READ FPDMA QUEUED + +Error 9 [8] occurred at disk power-on lifetime: 4501 hours (187 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 09 8f 46 90 40 00 Error: UNC at LBA = 0x098f4690 = 160384656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 00 00 80 00 00 09 8f 46 20 40 00 03:30:13.715 READ FPDMA QUEUED + 61 00 10 00 18 00 00 00 03 b9 40 40 00 03:30:13.715 WRITE FPDMA QUEUED + 60 00 20 00 10 00 00 14 66 3b c0 40 00 03:30:13.715 READ FPDMA QUEUED + 60 01 00 00 08 00 00 09 8f 47 20 40 00 03:30:13.715 READ FPDMA QUEUED + ef 00 90 00 03 00 00 00 00 00 00 00 00 03:30:13.715 SET FEATURES [Disable SATA feature] + +Error 8 [7] occurred at disk power-on lifetime: 4501 hours (187 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 09 8f 46 90 40 00 Error: UNC at LBA = 0x098f4690 = 160384656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 20 00 70 00 00 14 66 3b c0 40 00 03:30:11.599 READ FPDMA QUEUED + 61 00 08 00 68 00 00 14 66 34 b0 40 00 03:30:11.599 WRITE FPDMA QUEUED + 61 00 08 00 60 00 00 14 65 c0 28 40 00 03:30:11.598 WRITE FPDMA QUEUED + 61 00 08 00 58 00 00 14 64 79 00 40 00 03:30:11.597 WRITE FPDMA QUEUED + 61 00 08 00 50 00 00 14 64 70 e0 40 00 03:30:11.595 WRITE FPDMA QUEUED + +Error 7 [6] occurred at disk power-on lifetime: 4501 hours (187 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 09 8f 46 90 40 00 Error: WP at LBA = 0x098f4690 = 160384656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 18 00 50 00 00 09 09 41 f0 40 00 03:30:09.525 WRITE FPDMA QUEUED + 61 00 20 00 38 00 00 00 03 5b 50 40 00 03:30:09.524 WRITE FPDMA QUEUED + 61 00 08 00 30 00 00 00 03 2a 70 40 00 03:30:09.524 WRITE FPDMA QUEUED + 60 00 e0 00 28 00 00 09 8f 49 20 40 00 03:30:09.524 READ FPDMA QUEUED + 61 00 08 00 20 00 00 00 5f 0f 00 40 00 03:30:09.524 WRITE FPDMA QUEUED + +Error 6 [5] occurred at disk power-on lifetime: 4501 hours (187 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 09 8f 46 90 40 00 Error: WP at LBA = 0x098f4690 = 160384656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 18 00 40 00 00 09 09 41 f0 40 00 03:30:07.490 WRITE FPDMA QUEUED + 61 00 20 00 38 00 00 00 03 5b 50 40 00 03:30:07.490 WRITE FPDMA QUEUED + 61 00 08 00 30 00 00 00 03 2a 70 40 00 03:30:07.490 WRITE FPDMA QUEUED + 60 00 e0 00 28 00 00 09 8f 49 20 40 00 03:30:07.490 READ FPDMA QUEUED + 61 00 08 00 20 00 00 00 5f 0f 00 40 00 03:30:07.490 WRITE FPDMA QUEUED + +Error 5 [4] occurred at disk power-on lifetime: 4501 hours (187 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 09 8f 46 90 40 00 Error: WP at LBA = 0x098f4690 = 160384656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 18 00 40 00 00 09 09 41 f0 40 00 03:30:05.467 WRITE FPDMA QUEUED + 61 00 20 00 38 00 00 00 03 5b 50 40 00 03:30:05.467 WRITE FPDMA QUEUED + 61 00 08 00 30 00 00 00 03 2a 70 40 00 03:30:05.467 WRITE FPDMA QUEUED + 60 00 e0 00 28 00 00 09 8f 49 20 40 00 03:30:05.467 READ FPDMA QUEUED + 61 00 08 00 20 00 00 00 5f 0f 00 40 00 03:30:05.467 WRITE FPDMA QUEUED + +Error 4 [3] occurred at disk power-on lifetime: 4501 hours (187 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 09 8f 46 90 40 00 Error: WP at LBA = 0x098f4690 = 160384656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 18 00 48 00 00 09 09 41 f0 40 00 03:30:03.443 WRITE FPDMA QUEUED + 61 00 20 00 40 00 00 00 03 5b 50 40 00 03:30:03.443 WRITE FPDMA QUEUED + 61 00 08 00 38 00 00 00 03 2a 70 40 00 03:30:03.443 WRITE FPDMA QUEUED + 60 00 e0 00 28 00 00 09 8f 49 20 40 00 03:30:03.443 READ FPDMA QUEUED + 61 00 08 00 20 00 00 00 5f 0f 00 40 00 03:30:03.443 WRITE FPDMA QUEUED + +Error 3 [2] occurred at disk power-on lifetime: 4501 hours (187 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 51 00 00 00 00 09 8f 46 90 40 00 Error: WP at LBA = 0x098f4690 = 160384656 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 08 00 08 00 00 00 5f 0f 00 40 00 03:30:01.350 WRITE FPDMA QUEUED + 61 00 20 00 40 00 00 00 03 5b 50 40 00 03:30:01.350 WRITE FPDMA QUEUED + 61 00 08 00 38 00 00 00 03 2a 70 40 00 03:30:01.350 WRITE FPDMA QUEUED + 60 00 e0 00 30 00 00 09 8f 49 20 40 00 03:30:01.350 READ FPDMA QUEUED + 60 01 00 00 28 00 00 09 8f 48 20 40 00 03:30:01.349 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 14447 - +# 2 Short offline Aborted by host 90% 14447 - +# 3 Offline Interrupted (host reset) 00% 14443 - +# 4 Offline Interrupted (host reset) 00% 14443 - +# 5 Short offline Completed without error 00% 14443 - +# 6 Short offline Completed without error 00% 11217 - +# 7 Short offline Completed without error 00% 11017 - +# 8 Short offline Completed without error 00% 10857 - +# 9 Short offline Completed without error 00% 10594 - +#10 Offline Interrupted (host reset) 00% 9923 - +#11 Short offline Completed without error 00% 9351 - +#12 Short offline Aborted by host 10% 7849 - +#13 Short offline Completed without error 00% 7102 - +#14 Short offline Completed without error 00% 6650 - +#15 Short offline Completed without error 00% 5957 - +#16 Short offline Completed without error 00% 5783 - +#17 Short offline Completed without error 00% 5545 - +#18 Short offline Completed without error 00% 5295 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 40/41 Celsius +Lifetime Min/Max Temperature: 21/63 Celsius +Specified Max Operating Temperature: 28 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (54) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x8000 4 1386 Vendor specific + diff --git a/HDD/WDC/WD7500/WD7500BPKX-00HPJT0/64D8DD049F88 b/HDD/WDC/WD7500/WD7500BPKX-00HPJT0/64D8DD049F88 new file mode 100644 index 000000000..c417bc6b3 --- /dev/null +++ b/HDD/WDC/WD7500/WD7500BPKX-00HPJT0/64D8DD049F88 @@ -0,0 +1,101 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black Mobile +Device Model: WDC WD7500BPKX-00HPJT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Oct 20 00:56:48 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13200) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 131) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70b5) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 + 3 Spin_Up_Time 0x0027 194 192 021 Pre-fail Always - 1258 + 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2683 + 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 9832 + 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 + 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2683 +192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 4 +193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 611418 +194 Temperature_Celsius 0x0022 107 095 000 Old_age Always - 40 +196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 +200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Interrupted (host reset) 10% 4697 - +# 2 Short offline Completed without error 00% 784 - +# 3 Short offline Completed without error 00% 729 - +# 4 Extended offline Interrupted (host reset) 60% 679 - +# 5 Extended offline Interrupted (host reset) 70% 608 - +# 6 Short offline Completed without error 00% 177 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/HDD/WDC/WD7500/WD7500BPKX-80HPJT0/6A78DDC2E81C b/HDD/WDC/WD7500/WD7500BPKX-80HPJT0/6A78DDC2E81C new file mode 100644 index 000000000..cea846939 --- /dev/null +++ b/HDD/WDC/WD7500/WD7500BPKX-80HPJT0/6A78DDC2E81C @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Black Mobile +Device Model: WDC WD7500BPKX-80HPJT0 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 1 02:55:43 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (12180) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 121) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x70b5) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 + 3 Spin_Up_Time POS--K 194 186 021 - 1266 + 4 Start_Stop_Count -O--CK 098 098 000 - 2728 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 4278 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2715 +191 G-Sense_Error_Rate -O--CK 001 001 000 - 7949 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 253 +193 Load_Cycle_Count -O--CK 170 170 000 - 90193 +194 Temperature_Celsius -O---K 119 104 000 - 28 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 27/28 Celsius +Lifetime Min/Max Temperature: 0/43 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (65) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 112 Vendor specific + diff --git a/HDD/WDC/WD7500/WD7500BPVT-80HXZT3/C28D5A8B4FF0 b/HDD/WDC/WD7500/WD7500BPVT-80HXZT3/C28D5A8B4FF0 new file mode 100644 index 000000000..205781805 --- /dev/null +++ b/HDD/WDC/WD7500/WD7500BPVT-80HXZT3/C28D5A8B4FF0 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Scorpio Blue Serial ATA (AF) +Device Model: WDC WD7500BPVT-80HXZT3 +Serial Number: -- +LU WWN Device Id: 5 0014ee ... +Firmware Version: 01.01A01 +User Capacity: 750,156,374,016 bytes [750 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Aug 26 21:00:57 2020 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 96 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (15900) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 156) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x7035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 + 3 Spin_Up_Time POS--K 179 175 021 - 2050 + 4 Start_Stop_Count -O--CK 050 050 000 - 50371 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 + 9 Power_On_Hours -O--CK 088 088 000 - 9349 + 10 Spin_Retry_Count -O--CK 100 100 000 - 0 + 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 + 12 Power_Cycle_Count -O--CK 097 097 000 - 3493 +191 G-Sense_Error_Rate -O--CK 001 001 000 - 7738 +192 Power-Off_Retract_Count -O--CK 200 200 000 - 331 +193 Load_Cycle_Count -O--CK 001 001 000 - 744356 +194 Temperature_Celsius -O---K 110 102 000 - 37 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 +200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xbd GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xc1 GPL VS 93 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 258 (0x0102) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 29/37 Celsius +Lifetime Min/Max Temperature: 20/45 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -41/85 Celsius +Temperature History Size (Index): 128 (3) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x8000 4 7918 Vendor specific + diff --git a/HDD/WDC/WD80/WD80EFAX-68KNBN0/6C057E51CE88 b/HDD/WDC/WD80/WD80EFAX-68KNBN0/6C057E51CE88 new file mode 100644 index 000000000..a4903672d --- /dev/null +++ b/HDD/WDC/WD80/WD80EFAX-68KNBN0/6C057E51CE88 @@ -0,0 +1,217 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFAX-68KNBN0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 81.00A81 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:56:15 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 87) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 837) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 129 129 054 - 104 + 3 Spin_Up_Time POS--- 100 100 024 - 0 + 4 Start_Stop_Count -O--C- 100 100 000 - 3 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 100 100 000 - 6138 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 2011 +193 Load_Cycle_Count -O--C- 099 099 000 - 2011 +194 Temperature_Celsius -O---- 185 185 000 - 35 (Min/Max 25/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 34/45 Celsius +Lifetime Min/Max Temperature: 25/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (39) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 6138 --- Power-on Hours +0x01 0x018 6 161466 --- Logical Sectors Written +0x01 0x020 6 1827 --- Number of Write Commands +0x01 0x028 6 172514 --- Logical Sectors Read +0x01 0x030 6 2670 --- Number of Read Commands +0x01 0x038 6 22097866000 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5227 --- Spindle Motor Power-on Hours +0x03 0x010 4 5227 --- Head Flying Hours +0x03 0x018 4 2011 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 34 N-- Average Short Term Temperature +0x05 0x018 1 36 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 44 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 42 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5 --- Number of Hardware Resets +0x06 0x010 4 5 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFAX-68KNBN0/73B06296A136 b/HDD/WDC/WD80/WD80EFAX-68KNBN0/73B06296A136 new file mode 100644 index 000000000..47c658811 --- /dev/null +++ b/HDD/WDC/WD80/WD80EFAX-68KNBN0/73B06296A136 @@ -0,0 +1,217 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFAX-68KNBN0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 81.00A81 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:56:14 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 87) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 863) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 128 128 054 - 108 + 3 Spin_Up_Time POS--- 100 100 024 - 0 + 4 Start_Stop_Count -O--C- 100 100 000 - 3 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 100 100 000 - 6138 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 2001 +193 Load_Cycle_Count -O--C- 099 099 000 - 2001 +194 Temperature_Celsius -O---- 175 175 000 - 37 (Min/Max 25/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 36/47 Celsius +Lifetime Min/Max Temperature: 25/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (29) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 6138 --- Power-on Hours +0x01 0x018 6 160202 --- Logical Sectors Written +0x01 0x020 6 1705 --- Number of Write Commands +0x01 0x028 6 172264 --- Logical Sectors Read +0x01 0x030 6 2553 --- Number of Read Commands +0x01 0x038 6 22098211200 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5231 --- Spindle Motor Power-on Hours +0x03 0x010 4 5231 --- Head Flying Hours +0x03 0x018 4 2001 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 36 N-- Average Short Term Temperature +0x05 0x018 1 38 N-- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 46 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 44 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5 --- Number of Hardware Resets +0x06 0x010 4 5 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFAX-68KNBN0/98AE64579943 b/HDD/WDC/WD80/WD80EFAX-68KNBN0/98AE64579943 new file mode 100644 index 000000000..681e3ee00 --- /dev/null +++ b/HDD/WDC/WD80/WD80EFAX-68KNBN0/98AE64579943 @@ -0,0 +1,217 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFAX-68KNBN0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 81.00A81 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:56:15 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 87) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 916) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 127 127 054 - 112 + 3 Spin_Up_Time POS--- 100 100 024 - 0 + 4 Start_Stop_Count -O--C- 100 100 000 - 4 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 100 100 000 - 6138 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 2006 +193 Load_Cycle_Count -O--C- 099 099 000 - 2006 +194 Temperature_Celsius -O---- 175 175 000 - 37 (Min/Max 24/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 36/47 Celsius +Lifetime Min/Max Temperature: 24/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (25) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4 --- Lifetime Power-On Resets +0x01 0x010 4 6138 --- Power-on Hours +0x01 0x018 6 161466 --- Logical Sectors Written +0x01 0x020 6 1836 --- Number of Write Commands +0x01 0x028 6 177058 --- Logical Sectors Read +0x01 0x030 6 2583 --- Number of Read Commands +0x01 0x038 6 22097934450 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5232 --- Spindle Motor Power-on Hours +0x03 0x010 4 5232 --- Head Flying Hours +0x03 0x018 4 2006 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 36 N-- Average Short Term Temperature +0x05 0x018 1 38 N-- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 46 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 44 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5 --- Number of Hardware Resets +0x06 0x010 4 5 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFAX-68KNBN0/A623A48989CE b/HDD/WDC/WD80/WD80EFAX-68KNBN0/A623A48989CE new file mode 100644 index 000000000..80bb75e2e --- /dev/null +++ b/HDD/WDC/WD80/WD80EFAX-68KNBN0/A623A48989CE @@ -0,0 +1,217 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFAX-68KNBN0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 81.00A81 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Thu Oct 29 15:56:14 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 87) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 920) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 127 127 054 - 112 + 3 Spin_Up_Time POS--- 100 100 024 - 0 + 4 Start_Stop_Count -O--C- 100 100 000 - 3 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 100 100 000 - 6138 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 1991 +193 Load_Cycle_Count -O--C- 099 099 000 - 1991 +194 Temperature_Celsius -O---- 171 171 000 - 38 (Min/Max 24/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x2f GPL - 1 Set Sector Configuration +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 37/47 Celsius +Lifetime Min/Max Temperature: 24/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (24) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 6138 --- Power-on Hours +0x01 0x018 6 160186 --- Logical Sectors Written +0x01 0x020 6 1705 --- Number of Write Commands +0x01 0x028 6 172914 --- Logical Sectors Read +0x01 0x030 6 2677 --- Number of Read Commands +0x01 0x038 6 22097894500 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5230 --- Spindle Motor Power-on Hours +0x03 0x010 4 5230 --- Head Flying Hours +0x03 0x018 4 1991 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 37 N-- Average Short Term Temperature +0x05 0x018 1 39 N-- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 46 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 44 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5 --- Number of Hardware Resets +0x06 0x010 4 5 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFAX-68LHPN0/22E3149D7C3C b/HDD/WDC/WD80/WD80EFAX-68LHPN0/22E3149D7C3C new file mode 100644 index 000000000..3b3afdb5c --- /dev/null +++ b/HDD/WDC/WD80/WD80EFAX-68LHPN0/22E3149D7C3C @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFAX-68LHPN0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 14 14:23:42 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 975) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 130 130 054 - 109 + 3 Spin_Up_Time POS--- 168 168 024 - 385 (Average 399) + 4 Start_Stop_Count -O--C- 100 100 000 - 1492 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 099 099 000 - 9431 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1073 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 098 098 000 - 2630 +193 Load_Cycle_Count -O--C- 098 098 000 - 2630 +194 Temperature_Celsius -O---- 171 171 000 - 38 (Min/Max 21/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 37/39 Celsius +Lifetime Min/Max Temperature: 21/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (3) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1073 --- Lifetime Power-On Resets +0x01 0x010 4 9431 --- Power-on Hours +0x01 0x018 6 99481711270 --- Logical Sectors Written +0x01 0x020 6 908630775 --- Number of Write Commands +0x01 0x028 6 65293083253 --- Logical Sectors Read +0x01 0x030 6 361705923 --- Number of Read Commands +0x01 0x038 6 33954513000 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8860 --- Spindle Motor Power-on Hours +0x03 0x010 4 8860 --- Head Flying Hours +0x03 0x018 4 2630 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 539409 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 37 N-- Average Short Term Temperature +0x05 0x018 1 37 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 42 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 38 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4 --- Number of Hardware Resets +0x06 0x010 4 1198 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 215 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFAX-68LHPN0/BA25B7D37C7C b/HDD/WDC/WD80/WD80EFAX-68LHPN0/BA25B7D37C7C new file mode 100644 index 000000000..e963309e7 --- /dev/null +++ b/HDD/WDC/WD80/WD80EFAX-68LHPN0/BA25B7D37C7C @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFAX-68LHPN0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:05 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1016) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 129 129 054 - 112 + 3 Spin_Up_Time POS--- 164 164 024 - 404 (Average 399) + 4 Start_Stop_Count -O--C- 100 100 000 - 111 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 097 097 000 - 25352 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 111 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 091 091 000 - 11469 +193 Load_Cycle_Count -O--C- 091 091 000 - 11469 +194 Temperature_Celsius -O---- 250 250 000 - 26 (Min/Max 18/58) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 32 - +# 2 Extended offline Aborted by host 90% 32 - +# 3 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 21/35 Celsius +Lifetime Min/Max Temperature: 18/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (13) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 111 --- Lifetime Power-On Resets +0x01 0x010 4 25352 --- Power-on Hours +0x01 0x018 6 27256341837 --- Logical Sectors Written +0x01 0x020 6 136828653 --- Number of Write Commands +0x01 0x028 6 76655673343 --- Logical Sectors Read +0x01 0x030 6 667953344 --- Number of Read Commands +0x01 0x038 6 91267283550 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6484 --- Spindle Motor Power-on Hours +0x03 0x010 4 6484 --- Head Flying Hours +0x03 0x018 4 11469 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 692372 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 28 N-- Average Short Term Temperature +0x05 0x018 1 27 N-- Average Long Term Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 57 N-- Highest Average Short Term Temperature +0x05 0x038 1 18 N-- Lowest Average Short Term Temperature +0x05 0x040 1 55 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 80 --- Number of Hardware Resets +0x06 0x010 4 10594 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 79 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 80 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFAX-68LHPN0/C94BE678976C b/HDD/WDC/WD80/WD80EFAX-68LHPN0/C94BE678976C new file mode 100644 index 000000000..751d0315a --- /dev/null +++ b/HDD/WDC/WD80/WD80EFAX-68LHPN0/C94BE678976C @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFAX-68LHPN0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 10:31:10 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1031) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 127 127 054 - 120 + 3 Spin_Up_Time POS--- 151 151 024 - 433 (Average 437) + 4 Start_Stop_Count -O--C- 100 100 000 - 35 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 098 098 000 - 15985 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 35 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 096 096 000 - 5691 +193 Load_Cycle_Count -O--C- 096 096 000 - 5691 +194 Temperature_Celsius -O---- 141 141 000 - 46 (Min/Max 20/60) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 31/58 Celsius +Lifetime Min/Max Temperature: 20/60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (49) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 35 --- Lifetime Power-On Resets +0x01 0x010 4 15985 --- Power-on Hours +0x01 0x018 6 6837039461 --- Logical Sectors Written +0x01 0x020 6 91528224 --- Number of Write Commands +0x01 0x028 6 233551965326 --- Logical Sectors Read +0x01 0x030 6 1380984978 --- Number of Read Commands +0x01 0x038 6 57549031250 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4498 --- Spindle Motor Power-on Hours +0x03 0x010 4 4498 --- Head Flying Hours +0x03 0x018 4 5691 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 46 --- Current Temperature +0x05 0x010 1 45 N-- Average Short Term Temperature +0x05 0x018 1 46 N-- Average Long Term Temperature +0x05 0x020 1 60 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 56 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 48 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2 --- Number of Hardware Resets +0x06 0x010 4 49 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFZX-68UW8N0/190EDF80708A b/HDD/WDC/WD80/WD80EFZX-68UW8N0/190EDF80708A new file mode 100644 index 000000000..83da24ccd --- /dev/null +++ b/HDD/WDC/WD80/WD80EFZX-68UW8N0/190EDF80708A @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFZX-68UW8N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:08 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1083) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 131 131 054 - 116 + 3 Spin_Up_Time POS--- 182 182 024 - 395 (Average 329) + 4 Start_Stop_Count -O--C- 100 100 000 - 117 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 096 096 000 - 29825 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 117 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 090 090 000 - 12763 +193 Load_Cycle_Count -O--C- 090 090 000 - 12763 +194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 21/58) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 25/49 Celsius +Lifetime Min/Max Temperature: 21/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (99) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 117 --- Lifetime Power-On Resets +0x01 0x018 6 10201533179 --- Logical Sectors Written +0x01 0x020 6 76097423 --- Number of Write Commands +0x01 0x028 6 100399465846 --- Logical Sectors Read +0x01 0x030 6 872090412 --- Number of Read Commands +0x01 0x038 6 107370917350 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 7673 --- Spindle Motor Power-on Hours +0x03 0x010 4 7673 --- Head Flying Hours +0x03 0x018 4 12763 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1935024 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 37 N-- Average Short Term Temperature +0x05 0x018 1 37 N-- Average Long Term Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 54 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 43 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 80 --- Number of Hardware Resets +0x06 0x010 4 10645 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 79 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 80 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFZX-68UW8N0/441FDC5EB249 b/HDD/WDC/WD80/WD80EFZX-68UW8N0/441FDC5EB249 new file mode 100644 index 000000000..a0ab2c27d --- /dev/null +++ b/HDD/WDC/WD80/WD80EFZX-68UW8N0/441FDC5EB249 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFZX-68UW8N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 09:47:36 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1409) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 131 131 054 - 116 + 3 Spin_Up_Time POS--- 158 158 024 - 416 (Average 418) + 4 Start_Stop_Count -O--C- 100 100 000 - 67 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 096 096 000 - 31427 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 67 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 092 092 000 - 10339 +193 Load_Cycle_Count -O--C- 092 092 000 - 10339 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 14/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 30/38 Celsius +Lifetime Min/Max Temperature: 14/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (46) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x018 6 41809742119 --- Logical Sectors Written +0x01 0x020 6 1080421875 --- Number of Write Commands +0x01 0x028 6 173588457952 --- Logical Sectors Read +0x01 0x030 6 1753882502 --- Number of Read Commands +0x01 0x038 6 113137648450 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 17340 --- Spindle Motor Power-on Hours +0x03 0x010 4 17340 --- Head Flying Hours +0x03 0x018 4 10339 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 3774945 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 32 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 46 N-- Highest Average Short Term Temperature +0x05 0x038 1 15 N-- Lowest Average Short Term Temperature +0x05 0x040 1 43 N-- Highest Average Long Term Temperature +0x05 0x048 1 19 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7 --- Number of Hardware Resets +0x06 0x010 4 55 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFZX-68UW8N0/50046E11B906 b/HDD/WDC/WD80/WD80EFZX-68UW8N0/50046E11B906 new file mode 100644 index 000000000..8c9aaaec4 --- /dev/null +++ b/HDD/WDC/WD80/WD80EFZX-68UW8N0/50046E11B906 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFZX-68UW8N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 09:47:36 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1100) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 132 132 054 - 112 + 3 Spin_Up_Time POS--- 151 151 024 - 415 (Average 453) + 4 Start_Stop_Count -O--C- 100 100 000 - 69 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 096 096 000 - 31658 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 69 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 092 092 000 - 10398 +193 Load_Cycle_Count -O--C- 092 092 000 - 10398 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 14/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 30/38 Celsius +Lifetime Min/Max Temperature: 14/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (8) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 69 --- Lifetime Power-On Resets +0x01 0x018 6 54126922580 --- Logical Sectors Written +0x01 0x020 6 1176817235 --- Number of Write Commands +0x01 0x028 6 190573968751 --- Logical Sectors Read +0x01 0x030 6 1872673443 --- Number of Read Commands +0x01 0x038 6 113972391300 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 17396 --- Spindle Motor Power-on Hours +0x03 0x010 4 17396 --- Head Flying Hours +0x03 0x018 4 10398 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 3763100 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 32 N-- Average Short Term Temperature +0x05 0x018 1 32 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 15 N-- Lowest Average Short Term Temperature +0x05 0x040 1 35 N-- Highest Average Long Term Temperature +0x05 0x048 1 20 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7 --- Number of Hardware Resets +0x06 0x010 4 57 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFZX-68UW8N0/7E834C8E9520 b/HDD/WDC/WD80/WD80EFZX-68UW8N0/7E834C8E9520 new file mode 100644 index 000000000..ac6cec606 --- /dev/null +++ b/HDD/WDC/WD80/WD80EFZX-68UW8N0/7E834C8E9520 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFZX-68UW8N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:06 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1083) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 131 131 054 - 116 + 3 Spin_Up_Time POS--- 167 167 024 - 395 (Average 393) + 4 Start_Stop_Count -O--C- 100 100 000 - 166 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 096 096 000 - 30476 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 166 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 089 089 000 - 14041 +193 Load_Cycle_Count -O--C- 089 089 000 - 14041 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 21/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 24/46 Celsius +Lifetime Min/Max Temperature: 21/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (11) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 166 --- Lifetime Power-On Resets +0x01 0x018 6 18203175192 --- Logical Sectors Written +0x01 0x020 6 110201439 --- Number of Write Commands +0x01 0x028 6 109804942498 --- Logical Sectors Read +0x01 0x030 6 907058400 --- Number of Read Commands +0x01 0x038 6 109715315400 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8075 --- Spindle Motor Power-on Hours +0x03 0x010 4 8075 --- Head Flying Hours +0x03 0x018 4 14041 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 2013234 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 35 N-- Average Short Term Temperature +0x05 0x018 1 35 N-- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 51 N-- Highest Average Short Term Temperature +0x05 0x038 1 23 N-- Lowest Average Short Term Temperature +0x05 0x040 1 41 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 80 --- Number of Hardware Resets +0x06 0x010 4 10668 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 79 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 80 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFZX-68UW8N0/7EC4145202D8 b/HDD/WDC/WD80/WD80EFZX-68UW8N0/7EC4145202D8 new file mode 100644 index 000000000..12b3803d3 --- /dev/null +++ b/HDD/WDC/WD80/WD80EFZX-68UW8N0/7EC4145202D8 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFZX-68UW8N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:09 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1083) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 125 125 054 - 140 + 3 Spin_Up_Time POS--- 170 170 024 - 396 (Average 378) + 4 Start_Stop_Count -O--C- 100 100 000 - 117 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 096 096 000 - 29819 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 117 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 090 090 000 - 12885 +193 Load_Cycle_Count -O--C- 090 090 000 - 12885 +194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 21/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 23/44 Celsius +Lifetime Min/Max Temperature: 21/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (11) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 117 --- Lifetime Power-On Resets +0x01 0x018 6 10198738032 --- Logical Sectors Written +0x01 0x020 6 77818421 --- Number of Write Commands +0x01 0x028 6 99662759179 --- Logical Sectors Read +0x01 0x030 6 872159878 --- Number of Read Commands +0x01 0x038 6 107350762050 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 7662 --- Spindle Motor Power-on Hours +0x03 0x010 4 7662 --- Head Flying Hours +0x03 0x018 4 12885 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1930256 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 34 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 49 N-- Highest Average Short Term Temperature +0x05 0x038 1 22 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 80 --- Number of Hardware Resets +0x06 0x010 4 10687 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 79 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 80 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFZX-68UW8N0/98F3DB04E067 b/HDD/WDC/WD80/WD80EFZX-68UW8N0/98F3DB04E067 new file mode 100644 index 000000000..89a1eb574 --- /dev/null +++ b/HDD/WDC/WD80/WD80EFZX-68UW8N0/98F3DB04E067 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFZX-68UW8N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 09:47:36 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1083) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 129 129 054 - 124 + 3 Spin_Up_Time POS--- 152 152 024 - 414 (Average 453) + 4 Start_Stop_Count -O--C- 100 100 000 - 69 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 096 096 000 - 31659 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 69 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 092 092 000 - 10381 +193 Load_Cycle_Count -O--C- 092 092 000 - 10381 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 14/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 30/38 Celsius +Lifetime Min/Max Temperature: 14/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (77) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 69 --- Lifetime Power-On Resets +0x01 0x018 6 53867084711 --- Logical Sectors Written +0x01 0x020 6 1133791328 --- Number of Write Commands +0x01 0x028 6 190163847481 --- Logical Sectors Read +0x01 0x030 6 1849269250 --- Number of Read Commands +0x01 0x038 6 113974852550 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 17394 --- Spindle Motor Power-on Hours +0x03 0x010 4 17394 --- Head Flying Hours +0x03 0x018 4 10381 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 3901321 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 44 N-- Highest Average Short Term Temperature +0x05 0x038 1 15 N-- Lowest Average Short Term Temperature +0x05 0x040 1 39 N-- Highest Average Long Term Temperature +0x05 0x048 1 20 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7 --- Number of Hardware Resets +0x06 0x010 4 58 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFZX-68UW8N0/9AD727707936 b/HDD/WDC/WD80/WD80EFZX-68UW8N0/9AD727707936 new file mode 100644 index 000000000..f2cbcac25 --- /dev/null +++ b/HDD/WDC/WD80/WD80EFZX-68UW8N0/9AD727707936 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFZX-68UW8N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:07 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1167) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 128 128 054 - 127 + 3 Spin_Up_Time POS--- 180 180 024 - 398 (Average 332) + 4 Start_Stop_Count -O--C- 100 100 000 - 117 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 096 096 000 - 29823 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 117 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 089 089 000 - 13216 +193 Load_Cycle_Count -O--C- 089 089 000 - 13216 +194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 20/58) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 24/49 Celsius +Lifetime Min/Max Temperature: 20/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (116) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 117 --- Lifetime Power-On Resets +0x01 0x018 6 10456089101 --- Logical Sectors Written +0x01 0x020 6 79495426 --- Number of Write Commands +0x01 0x028 6 99940888811 --- Logical Sectors Read +0x01 0x030 6 877875712 --- Number of Read Commands +0x01 0x038 6 107364233850 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 7729 --- Spindle Motor Power-on Hours +0x03 0x010 4 7729 --- Head Flying Hours +0x03 0x018 4 13216 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1961951 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 37 N-- Average Short Term Temperature +0x05 0x018 1 37 N-- Average Long Term Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 54 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 43 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 80 --- Number of Hardware Resets +0x06 0x010 4 10644 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 79 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 80 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFZX-68UW8N0/E00A35394704 b/HDD/WDC/WD80/WD80EFZX-68UW8N0/E00A35394704 new file mode 100644 index 000000000..4c32097cd --- /dev/null +++ b/HDD/WDC/WD80/WD80EFZX-68UW8N0/E00A35394704 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFZX-68UW8N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 14 14:23:43 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1259) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 131 131 054 - 116 + 3 Spin_Up_Time POS--- 175 175 024 - 366 (Average 386) + 4 Start_Stop_Count -O--C- 100 100 000 - 132 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 099 099 000 - 7269 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 110 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 427 +193 Load_Cycle_Count -O--C- 100 100 000 - 427 +194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 21/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 34/37 Celsius +Lifetime Min/Max Temperature: 21/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (123) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 110 --- Lifetime Power-On Resets +0x01 0x018 6 85229346097 --- Logical Sectors Written +0x01 0x020 6 806308557 --- Number of Write Commands +0x01 0x028 6 64186854176 --- Logical Sectors Read +0x01 0x030 6 274325074 --- Number of Read Commands +0x01 0x038 6 26169492950 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 7090 --- Spindle Motor Power-on Hours +0x03 0x010 4 7090 --- Head Flying Hours +0x03 0x018 4 427 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 415528 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 35 N-- Average Short Term Temperature +0x05 0x018 1 34 N-- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 43 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 41 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4 --- Number of Hardware Resets +0x06 0x010 4 839 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 243 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EFZX-68UW8N0/F0AB36A3E823 b/HDD/WDC/WD80/WD80EFZX-68UW8N0/F0AB36A3E823 new file mode 100644 index 000000000..e52edc585 --- /dev/null +++ b/HDD/WDC/WD80/WD80EFZX-68UW8N0/F0AB36A3E823 @@ -0,0 +1,209 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EFZX-68UW8N0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 09:47:36 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1217) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 130 130 054 - 120 + 3 Spin_Up_Time POS--- 158 158 024 - 415 (Average 418) + 4 Start_Stop_Count -O--C- 100 100 000 - 68 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 096 096 000 - 31659 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 68 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 092 092 000 - 10478 +193 Load_Cycle_Count -O--C- 092 092 000 - 10478 +194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 15/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 30/40 Celsius +Lifetime Min/Max Temperature: 15/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (35) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 68 --- Lifetime Power-On Resets +0x01 0x018 6 54090223532 --- Logical Sectors Written +0x01 0x020 6 1177480952 --- Number of Write Commands +0x01 0x028 6 190373151700 --- Logical Sectors Read +0x01 0x030 6 1868739373 --- Number of Read Commands +0x01 0x038 6 113975676300 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 17163 --- Spindle Motor Power-on Hours +0x03 0x010 4 17163 --- Head Flying Hours +0x03 0x018 4 10478 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 3920198 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 45 N-- Highest Average Short Term Temperature +0x05 0x038 1 16 N-- Lowest Average Short Term Temperature +0x05 0x040 1 43 N-- Highest Average Long Term Temperature +0x05 0x048 1 20 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7 --- Number of Hardware Resets +0x06 0x010 4 57 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/WDC/WD80/WD80EMAZ-00WJTA0/3ED59BD7D450 b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/3ED59BD7D450 new file mode 100644 index 000000000..b84c5ca98 --- /dev/null +++ b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/3ED59BD7D450 @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Ultrastar He10/12 +Device Model: WDC WD80EMAZ-00WJTA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 10:31:09 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 977) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 129 129 054 - 112 + 3 Spin_Up_Time POS--- 152 152 024 - 428 (Average 437) + 4 Start_Stop_Count -O--C- 100 100 000 - 50 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 098 098 000 - 15903 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 50 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 096 096 000 - 5402 +193 Load_Cycle_Count -O--C- 096 096 000 - 5402 +194 Temperature_Celsius -O---- 132 132 000 - 49 (Min/Max 20/58) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 497 - +# 2 Short offline Completed without error 00% 481 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 49 Celsius +Power Cycle Min/Max Temperature: 29/54 Celsius +Lifetime Min/Max Temperature: 20/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (95) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 50 --- Lifetime Power-On Resets +0x01 0x010 4 15903 --- Power-on Hours +0x01 0x018 6 6665010013 --- Logical Sectors Written +0x01 0x020 6 84714363 --- Number of Write Commands +0x01 0x028 6 214437284873 --- Logical Sectors Read +0x01 0x030 6 1232690410 --- Number of Read Commands +0x01 0x038 6 57252189550 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4346 --- Spindle Motor Power-on Hours +0x03 0x010 4 4346 --- Head Flying Hours +0x03 0x018 4 5402 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 49 --- Current Temperature +0x05 0x010 1 46 N-- Average Short Term Temperature +0x05 0x018 1 44 N-- Average Long Term Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 54 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 46 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2 --- Number of Hardware Resets +0x06 0x010 4 40 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EMAZ-00WJTA0/5AAEC768026E b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/5AAEC768026E new file mode 100644 index 000000000..724382ca1 --- /dev/null +++ b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/5AAEC768026E @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Ultrastar He10/12 +Device Model: WDC WD80EMAZ-00WJTA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:03 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1024) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 129 129 054 - 112 + 3 Spin_Up_Time POS--- 175 175 024 - 341 (Average 410) + 4 Start_Stop_Count -O--C- 100 100 000 - 109 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 097 097 000 - 25349 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 109 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 091 091 000 - 11508 +193 Load_Cycle_Count -O--C- 091 091 000 - 11508 +194 Temperature_Celsius -O---- 250 250 000 - 26 (Min/Max 17/43) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 42 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 21/34 Celsius +Lifetime Min/Max Temperature: 17/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (97) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 109 --- Lifetime Power-On Resets +0x01 0x010 4 25349 --- Power-on Hours +0x01 0x018 6 36996784309 --- Logical Sectors Written +0x01 0x020 6 174092175 --- Number of Write Commands +0x01 0x028 6 76661784643 --- Logical Sectors Read +0x01 0x030 6 641478944 --- Number of Read Commands +0x01 0x038 6 91257112450 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6594 --- Spindle Motor Power-on Hours +0x03 0x010 4 6594 --- Head Flying Hours +0x03 0x018 4 11508 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10459 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 28 N-- Average Short Term Temperature +0x05 0x018 1 26 N-- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 18 N-- Lowest Average Short Term Temperature +0x05 0x040 1 34 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 80 --- Number of Hardware Resets +0x06 0x010 4 10592 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 79 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 80 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EMAZ-00WJTA0/9C3791A7D036 b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/9C3791A7D036 new file mode 100644 index 000000000..8eda9c6c5 --- /dev/null +++ b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/9C3791A7D036 @@ -0,0 +1,215 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Ultrastar He10/12 +Device Model: WDC WD80EMAZ-00WJTA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 10:31:13 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 965) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 129 129 054 - 112 + 3 Spin_Up_Time POS--- 147 147 024 - 446 (Average 448) + 4 Start_Stop_Count -O--C- 100 100 000 - 30 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 098 098 000 - 15937 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 30 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 096 096 000 - 5567 +193 Load_Cycle_Count -O--C- 096 096 000 - 5567 +194 Temperature_Celsius -O---- 147 147 000 - 44 (Min/Max 20/54) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 29/51 Celsius +Lifetime Min/Max Temperature: 20/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (65) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 15937 --- Power-on Hours +0x01 0x018 6 6798731479 --- Logical Sectors Written +0x01 0x020 6 90864458 --- Number of Write Commands +0x01 0x028 6 224277135047 --- Logical Sectors Read +0x01 0x030 6 1324499238 --- Number of Read Commands +0x01 0x038 6 57375715200 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4415 --- Spindle Motor Power-on Hours +0x03 0x010 4 4415 --- Head Flying Hours +0x03 0x018 4 5567 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 44 --- Current Temperature +0x05 0x010 1 42 N-- Average Short Term Temperature +0x05 0x018 1 41 N-- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 52 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 43 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2 --- Number of Hardware Resets +0x06 0x010 4 45 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/WDC/WD80/WD80EMAZ-00WJTA0/A1598306BAA9 b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/A1598306BAA9 new file mode 100644 index 000000000..c60fc9d7a --- /dev/null +++ b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/A1598306BAA9 @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Ultrastar He10/12 +Device Model: WDC WD80EMAZ-00WJTA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 10:31:09 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1009) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 129 129 054 - 112 + 3 Spin_Up_Time POS--- 151 151 024 - 435 (Average 438) + 4 Start_Stop_Count -O--C- 100 100 000 - 30 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 098 098 000 - 15937 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 30 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 096 096 000 - 5564 +193 Load_Cycle_Count -O--C- 096 096 000 - 5564 +194 Temperature_Celsius -O---- 138 138 000 - 47 (Min/Max 20/59) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 31/57 Celsius +Lifetime Min/Max Temperature: 20/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (46) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 30 --- Lifetime Power-On Resets +0x01 0x010 4 15937 --- Power-on Hours +0x01 0x018 6 6796607591 --- Logical Sectors Written +0x01 0x020 6 90778077 --- Number of Write Commands +0x01 0x028 6 224489430850 --- Logical Sectors Read +0x01 0x030 6 1312867319 --- Number of Read Commands +0x01 0x038 6 57375953550 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4477 --- Spindle Motor Power-on Hours +0x03 0x010 4 4477 --- Head Flying Hours +0x03 0x018 4 5564 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x010 1 45 N-- Average Short Term Temperature +0x05 0x018 1 46 N-- Average Long Term Temperature +0x05 0x020 1 59 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 56 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 48 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2 --- Number of Hardware Resets +0x06 0x010 4 42 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EMAZ-00WJTA0/ABC65C8CE003 b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/ABC65C8CE003 new file mode 100644 index 000000000..d9591bf3d --- /dev/null +++ b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/ABC65C8CE003 @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Ultrastar He10/12 +Device Model: WDC WD80EMAZ-00WJTA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:10 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1070) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 126 126 054 - 122 + 3 Spin_Up_Time POS--- 156 156 024 - 398 (Average 447) + 4 Start_Stop_Count -O--C- 100 100 000 - 3296 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 098 098 000 - 14369 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 804 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 086 086 000 - 17749 +193 Load_Cycle_Count -O--C- 086 086 000 - 17749 +194 Temperature_Celsius -O---- 250 250 000 - 26 (Min/Max 9/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 21/37 Celsius +Lifetime Min/Max Temperature: 9/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (76) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 804 --- Lifetime Power-On Resets +0x01 0x010 4 14369 --- Power-on Hours +0x01 0x018 6 13869207970 --- Logical Sectors Written +0x01 0x020 6 66342820 --- Number of Write Commands +0x01 0x028 6 22561668429 --- Logical Sectors Read +0x01 0x030 6 235253532 --- Number of Read Commands +0x01 0x038 6 51729928100 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 4923 --- Spindle Motor Power-on Hours +0x03 0x010 4 4923 --- Head Flying Hours +0x03 0x018 4 17749 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 28 N-- Average Short Term Temperature +0x05 0x018 1 27 N-- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 41 N-- Highest Average Short Term Temperature +0x05 0x038 1 21 N-- Lowest Average Short Term Temperature +0x05 0x040 1 39 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 40 --- Number of Hardware Resets +0x06 0x010 4 725 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 39 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 40 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EMAZ-00WJTA0/C3099E4975D8 b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/C3099E4975D8 new file mode 100644 index 000000000..c0ef1ed9a --- /dev/null +++ b/HDD/WDC/WD80/WD80EMAZ-00WJTA0/C3099E4975D8 @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Ultrastar He10/12 +Device Model: WDC WD80EMAZ-00WJTA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:06 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 164 (intermediate level without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 955) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 129 129 054 - 112 + 3 Spin_Up_Time POS--- 174 174 024 - 343 (Average 412) + 4 Start_Stop_Count -O--C- 100 100 000 - 109 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 097 097 000 - 25332 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 109 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 091 091 000 - 11560 +193 Load_Cycle_Count -O--C- 091 091 000 - 11560 +194 Temperature_Celsius -O---- 232 232 000 - 28 (Min/Max 15/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 30 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 21/34 Celsius +Lifetime Min/Max Temperature: 15/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (93) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 109 --- Lifetime Power-On Resets +0x01 0x010 4 25332 --- Power-on Hours +0x01 0x018 6 23920216597 --- Logical Sectors Written +0x01 0x020 6 123192865 --- Number of Write Commands +0x01 0x028 6 76727229425 --- Logical Sectors Read +0x01 0x030 6 655454226 --- Number of Read Commands +0x01 0x038 6 91196442100 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6476 --- Spindle Motor Power-on Hours +0x03 0x010 4 6476 --- Head Flying Hours +0x03 0x018 4 11560 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 18 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 29 N-- Average Short Term Temperature +0x05 0x018 1 27 N-- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 41 N-- Highest Average Short Term Temperature +0x05 0x038 1 19 N-- Lowest Average Short Term Temperature +0x05 0x040 1 34 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 80 --- Number of Hardware Resets +0x06 0x010 4 10595 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 79 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 80 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EZAZ-11TDBA0/2A52873A362D b/HDD/WDC/WD80/WD80EZAZ-11TDBA0/2A52873A362D new file mode 100644 index 000000000..99a8223f0 --- /dev/null +++ b/HDD/WDC/WD80/WD80EZAZ-11TDBA0/2A52873A362D @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WDC HGST Ultrastar He10 +Device Model: WDC WD80EZAZ-11TDBA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 20:11:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1087) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 127 127 054 - 120 + 3 Spin_Up_Time POS--- 155 155 024 - 448 (Average 402) + 4 Start_Stop_Count -O--C- 100 100 000 - 23 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 099 099 000 - 11821 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 098 098 000 - 3171 +193 Load_Cycle_Count -O--C- 098 098 000 - 3171 +194 Temperature_Celsius -O---- 122 122 000 - 53 (Min/Max 23/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 53 Celsius +Power Cycle Min/Max Temperature: 49/57 Celsius +Lifetime Min/Max Temperature: 23/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (5) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 11821 --- Power-on Hours +0x01 0x018 6 14277857828 --- Logical Sectors Written +0x01 0x020 6 133479828 --- Number of Write Commands +0x01 0x028 6 18207640796 --- Logical Sectors Read +0x01 0x030 6 176292471 --- Number of Read Commands +0x01 0x038 6 42557000500 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6860 --- Spindle Motor Power-on Hours +0x03 0x010 4 6860 --- Head Flying Hours +0x03 0x018 4 3171 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 53 --- Current Temperature +0x05 0x010 1 52 N-- Average Short Term Temperature +0x05 0x018 1 52 N-- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 56 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 52 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5 --- Number of Hardware Resets +0x06 0x010 4 13 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EZAZ-11TDBA0/2F3875BDC52C b/HDD/WDC/WD80/WD80EZAZ-11TDBA0/2F3875BDC52C new file mode 100644 index 000000000..33b955a9e --- /dev/null +++ b/HDD/WDC/WD80/WD80EZAZ-11TDBA0/2F3875BDC52C @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WDC HGST Ultrastar He10 +Device Model: WDC WD80EZAZ-11TDBA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 20:11:47 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1020) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 129 129 054 - 112 + 3 Spin_Up_Time POS--- 155 155 024 - 454 (Average 394) + 4 Start_Stop_Count -O--C- 100 100 000 - 23 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 099 099 000 - 11821 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 098 098 000 - 3164 +193 Load_Cycle_Count -O--C- 098 098 000 - 3164 +194 Temperature_Celsius -O---- 118 118 000 - 55 (Min/Max 22/58) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 55 Celsius +Power Cycle Min/Max Temperature: 49/58 Celsius +Lifetime Min/Max Temperature: 22/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (90) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 11821 --- Power-on Hours +0x01 0x018 6 14288579480 --- Logical Sectors Written +0x01 0x020 6 134468168 --- Number of Write Commands +0x01 0x028 6 18117868108 --- Logical Sectors Read +0x01 0x030 6 178723449 --- Number of Read Commands +0x01 0x038 6 42557169450 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6828 --- Spindle Motor Power-on Hours +0x03 0x010 4 6828 --- Head Flying Hours +0x03 0x018 4 3164 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 55 --- Current Temperature +0x05 0x010 1 54 N-- Average Short Term Temperature +0x05 0x018 1 53 N-- Average Long Term Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 57 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 53 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5 --- Number of Hardware Resets +0x06 0x010 4 11 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EZAZ-11TDBA0/3D2D5FA4D55E b/HDD/WDC/WD80/WD80EZAZ-11TDBA0/3D2D5FA4D55E new file mode 100644 index 000000000..21459398c --- /dev/null +++ b/HDD/WDC/WD80/WD80EZAZ-11TDBA0/3D2D5FA4D55E @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WDC HGST Ultrastar He10 +Device Model: WDC WD80EZAZ-11TDBA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 20:11:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1190) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 129 129 054 - 112 + 3 Spin_Up_Time POS--- 159 159 024 - 424 (Average 404) + 4 Start_Stop_Count -O--C- 100 100 000 - 24 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 099 099 000 - 11821 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 24 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 098 098 000 - 3224 +193 Load_Cycle_Count -O--C- 098 098 000 - 3224 +194 Temperature_Celsius -O---- 138 138 000 - 47 (Min/Max 23/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 44/50 Celsius +Lifetime Min/Max Temperature: 23/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (50) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 24 --- Lifetime Power-On Resets +0x01 0x010 4 11821 --- Power-on Hours +0x01 0x018 6 14402556338 --- Logical Sectors Written +0x01 0x020 6 141268608 --- Number of Write Commands +0x01 0x028 6 18721503076 --- Logical Sectors Read +0x01 0x030 6 190008359 --- Number of Read Commands +0x01 0x038 6 42557175050 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6818 --- Spindle Motor Power-on Hours +0x03 0x010 4 6818 --- Head Flying Hours +0x03 0x018 4 3224 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x010 1 46 N-- Average Short Term Temperature +0x05 0x018 1 46 N-- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 50 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 46 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5 --- Number of Hardware Resets +0x06 0x010 4 12 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EZAZ-11TDBA0/3D3BDD010FCF b/HDD/WDC/WD80/WD80EZAZ-11TDBA0/3D3BDD010FCF new file mode 100644 index 000000000..19dafd1f1 --- /dev/null +++ b/HDD/WDC/WD80/WD80EZAZ-11TDBA0/3D3BDD010FCF @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WDC HGST Ultrastar He10 +Device Model: WDC WD80EZAZ-11TDBA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 20:11:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1000) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 128 128 054 - 116 + 3 Spin_Up_Time POS--- 153 153 024 - 455 (Average 406) + 4 Start_Stop_Count -O--C- 100 100 000 - 23 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 099 099 000 - 11821 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 098 098 000 - 3216 +193 Load_Cycle_Count -O--C- 098 098 000 - 3216 +194 Temperature_Celsius -O---- 122 122 000 - 53 (Min/Max 22/56) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 53 Celsius +Power Cycle Min/Max Temperature: 48/56 Celsius +Lifetime Min/Max Temperature: 22/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (79) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 11821 --- Power-on Hours +0x01 0x018 6 14402469560 --- Logical Sectors Written +0x01 0x020 6 140788617 --- Number of Write Commands +0x01 0x028 6 18803631567 --- Logical Sectors Read +0x01 0x030 6 187266959 --- Number of Read Commands +0x01 0x038 6 42557189900 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 6842 --- Spindle Motor Power-on Hours +0x03 0x010 4 6842 --- Head Flying Hours +0x03 0x018 4 3216 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 0 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 53 --- Current Temperature +0x05 0x010 1 52 N-- Average Short Term Temperature +0x05 0x018 1 52 N-- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 55 N-- Highest Average Short Term Temperature +0x05 0x038 1 24 N-- Lowest Average Short Term Temperature +0x05 0x040 1 52 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5 --- Number of Hardware Resets +0x06 0x010 4 13 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EZAZ-11TDBA0/FF9A03A14AEE b/HDD/WDC/WD80/WD80EZAZ-11TDBA0/FF9A03A14AEE new file mode 100644 index 000000000..7611148a2 --- /dev/null +++ b/HDD/WDC/WD80/WD80EZAZ-11TDBA0/FF9A03A14AEE @@ -0,0 +1,218 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Ultrastar He10/12 +Device Model: WDC WD80EZAZ-11TDBA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A83 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 10:31:11 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 93) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 925) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance --S--- 129 129 054 - 112 + 3 Spin_Up_Time POS--- 154 154 024 - 423 (Average 429) + 4 Start_Stop_Count -O--C- 100 100 000 - 55 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 + 8 Seek_Time_Performance --S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 098 098 000 - 16151 + 10 Spin_Retry_Count -O--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 55 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 097 097 000 - 4553 +193 Load_Cycle_Count -O--C- 097 097 000 - 4553 +194 Temperature_Celsius -O---- 144 144 000 - 45 (Min/Max 20/58) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL R/O 256 Device Statistics log +0x04 SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x0c GPL R/O 5501 Pending Defects log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x15 GPL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 141 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 31/56 Celsius +Lifetime Min/Max Temperature: 20/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (82) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 55 --- Lifetime Power-On Resets +0x01 0x010 4 16151 --- Power-on Hours +0x01 0x018 6 18044184860 --- Logical Sectors Written +0x01 0x020 6 183798209 --- Number of Write Commands +0x01 0x028 6 254728388310 --- Logical Sectors Read +0x01 0x030 6 1545405848 --- Number of Read Commands +0x01 0x038 6 58145662600 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 5020 --- Spindle Motor Power-on Hours +0x03 0x010 4 5020 --- Head Flying Hours +0x03 0x018 4 4553 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 75 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x010 1 43 N-- Average Short Term Temperature +0x05 0x018 1 45 N-- Average Long Term Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 55 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 47 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1 --- Number of Hardware Resets +0x06 0x010 4 50 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0xff ===== = = === == Vendor Specific Statistics (rev 1) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) +No Defects Logged + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EZZX-11CSGA0/040D6536873E b/HDD/WDC/WD80/WD80EZZX-11CSGA0/040D6536873E new file mode 100644 index 000000000..4b2dae2b9 --- /dev/null +++ b/HDD/WDC/WD80/WD80EZZX-11CSGA0/040D6536873E @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EZZX-11CSGA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A03 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 14:23:42 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1242) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 130 130 054 - 120 + 3 Spin_Up_Time POS--- 171 171 024 - 377 (Average 393) + 4 Start_Stop_Count -O--C- 100 100 000 - 2023 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 097 097 000 - 26656 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1097 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 097 097 000 - 3643 +193 Load_Cycle_Count -O--C- 097 097 000 - 3643 +194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 18/48) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 32/35 Celsius +Lifetime Min/Max Temperature: 18/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (42) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1097 --- Lifetime Power-On Resets +0x01 0x018 6 156417604649 --- Logical Sectors Written +0x01 0x020 6 1610384098 --- Number of Write Commands +0x01 0x028 6 273352948334 --- Logical Sectors Read +0x01 0x030 6 1333914022 --- Number of Read Commands +0x01 0x038 6 95963100150 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 25972 --- Spindle Motor Power-on Hours +0x03 0x010 4 25972 --- Head Flying Hours +0x03 0x018 4 3643 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 1976734 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 33 N-- Average Short Term Temperature +0x05 0x018 1 33 N-- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 46 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 40 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3 --- Number of Hardware Resets +0x06 0x010 4 374 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EZZX-11CSGA0/257571EC7BD5 b/HDD/WDC/WD80/WD80EZZX-11CSGA0/257571EC7BD5 new file mode 100644 index 000000000..8367a118c --- /dev/null +++ b/HDD/WDC/WD80/WD80EZZX-11CSGA0/257571EC7BD5 @@ -0,0 +1,209 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EZZX-11CSGA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A03 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:35:53 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1100) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 132 132 054 - 110 + 3 Spin_Up_Time POS--- 146 146 024 - 451 (Average 450) + 4 Start_Stop_Count -O--C- 100 100 000 - 822 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 100 100 000 - 999 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 822 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 829 +193 Load_Cycle_Count -O--C- 100 100 000 - 829 +194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 19/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 24/24 Celsius +Lifetime Min/Max Temperature: 19/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (16) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 822 --- Lifetime Power-On Resets +0x01 0x018 6 394628386982 --- Logical Sectors Written +0x01 0x020 6 1552528252 --- Number of Write Commands +0x01 0x028 6 999391787 --- Logical Sectors Read +0x01 0x030 6 44115802 --- Number of Read Commands +0x01 0x038 6 3598815800 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 995 --- Spindle Motor Power-on Hours +0x03 0x010 4 995 --- Head Flying Hours +0x03 0x018 4 829 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 12452 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 39 N-- Average Short Term Temperature +0x05 0x018 1 39 N-- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 55 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 54 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/HDD/WDC/WD80/WD80EZZX-11CSGA0/86E00D27E3A7 b/HDD/WDC/WD80/WD80EZZX-11CSGA0/86E00D27E3A7 new file mode 100644 index 000000000..5ad87721b --- /dev/null +++ b/HDD/WDC/WD80/WD80EZZX-11CSGA0/86E00D27E3A7 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EZZX-11CSGA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A03 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:35:53 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1192) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 131 131 054 - 117 + 3 Spin_Up_Time POS--- 145 145 024 - 455 (Average 454) + 4 Start_Stop_Count -O--C- 100 100 000 - 713 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 100 100 000 - 1093 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 713 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 716 +193 Load_Cycle_Count -O--C- 100 100 000 - 716 +194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 20/59) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 24/24 Celsius +Lifetime Min/Max Temperature: 20/59 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (125) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 713 --- Lifetime Power-On Resets +0x01 0x018 6 390357287101 --- Logical Sectors Written +0x01 0x020 6 1540923479 --- Number of Write Commands +0x01 0x028 6 5461230770 --- Logical Sectors Read +0x01 0x030 6 286556756 --- Number of Read Commands +0x01 0x038 6 3937571750 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 1090 --- Spindle Motor Power-on Hours +0x03 0x010 4 1090 --- Head Flying Hours +0x03 0x018 4 716 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 25364 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 37 N-- Average Short Term Temperature +0x05 0x018 1 41 N-- Average Long Term Temperature +0x05 0x020 1 59 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 53 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 52 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD80/WD80EZZX-11CSGA0/ACB9367823D8 b/HDD/WDC/WD80/WD80EZZX-11CSGA0/ACB9367823D8 new file mode 100644 index 000000000..7e230fa7a --- /dev/null +++ b/HDD/WDC/WD80/WD80EZZX-11CSGA0/ACB9367823D8 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red +Device Model: WDC WD80EZZX-11CSGA0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A03 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 5400 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 14:23:42 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1083) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 131 131 054 - 116 + 3 Spin_Up_Time POS--- 164 164 024 - 398 (Average 403) + 4 Start_Stop_Count -O--C- 100 100 000 - 1461 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 099 099 000 - 8459 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 603 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 099 099 000 - 2030 +193 Load_Cycle_Count -O--C- 099 099 000 - 2030 +194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 19/43) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 8 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 36/38 Celsius +Lifetime Min/Max Temperature: 19/43 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (95) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 603 --- Lifetime Power-On Resets +0x01 0x018 6 121115309973 --- Logical Sectors Written +0x01 0x020 6 1021123292 --- Number of Write Commands +0x01 0x028 6 133245701982 --- Logical Sectors Read +0x01 0x030 6 685833175 --- Number of Read Commands +0x01 0x038 6 30452704300 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 8225 --- Spindle Motor Power-on Hours +0x03 0x010 4 8225 --- Head Flying Hours +0x03 0x018 4 2030 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 925251 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 37 N-- Average Short Term Temperature +0x05 0x018 1 36 N-- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 40 N-- Highest Average Short Term Temperature +0x05 0x038 1 25 N-- Lowest Average Short Term Temperature +0x05 0x040 1 36 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2 --- Number of Hardware Resets +0x06 0x010 4 126 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/HDD/WDC/WD800/WD800BB-00HEA0/2CF13A0741AE b/HDD/WDC/WD800/WD800BB-00HEA0/2CF13A0741AE new file mode 100644 index 000000000..69f04214a --- /dev/null +++ b/HDD/WDC/WD800/WD800BB-00HEA0/2CF13A0741AE @@ -0,0 +1,238 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar +Device Model: WDC WD800BB-00HEA0 +Serial Number: -- +Firmware Version: 13.03G13 +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-6 (minor revision not indicated) +Local Time is: Sun Oct 4 21:30:13 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2460) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 35) minutes. +Conveyance self-test routine +recommended polling time: ( 5) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 200 200 051 - 10794 + 3 Spin_Up_Time POS--- 100 100 021 - 2375 + 4 Start_Stop_Count -O--CK 097 097 040 - 3528 + 5 Reallocated_Sector_Ct PO--CK 197 197 140 - 20 + 7 Seek_Error_Rate PO-R-- 200 200 051 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 103742 + 10 Spin_Retry_Count PO--C- 100 100 051 - 0 + 11 Calibration_Retry_Count PO--C- 100 100 051 - 0 + 12 Power_Cycle_Count -O--CK 098 098 000 - 2493 +194 Temperature_Celsius -O---K 112 010 000 - 31 +196 Reallocated_Event_Count -O--CK 199 199 000 - 1 +197 Current_Pending_Sector -O--C- 200 151 000 - 0 +198 Offline_Uncorrectable -O--C- 200 149 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 001 000 - 11711 +200 Multi_Zone_Error_Rate P--R-- 200 001 051 Past 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: Input/output error + +General Purpose Log Directory not supported + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 1 +Warning: ATA error count 15969 inconsistent with error log pointer 5 + +ATA Error Count: 15969 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 15969 occurred at disk power-on lifetime: 2732 hours (113 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 01 7b f6 ad f1 Error: UNC 1 sectors at LBA = 0x01adf67b = 28178043 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 02 7a f6 ad 01 51 5d+14:51:29.500 READ DMA + c8 00 02 7a f6 ad 01 51 5d+14:51:27.560 READ DMA + c8 00 02 7a f6 ad 01 51 5d+14:51:25.650 READ DMA + c8 00 02 7a f6 ad 01 51 5d+14:51:23.720 READ DMA + c8 00 02 7a f6 ad 01 51 5d+14:51:21.805 READ DMA + +Error 15968 occurred at disk power-on lifetime: 2732 hours (113 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 01 7b f6 ad f1 Error: UNC 1 sectors at LBA = 0x01adf67b = 28178043 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 02 7a f6 ad 01 51 5d+14:51:27.560 READ DMA + c8 00 02 7a f6 ad 01 51 5d+14:51:25.650 READ DMA + c8 00 02 7a f6 ad 01 51 5d+14:51:23.720 READ DMA + c8 00 02 7a f6 ad 01 51 5d+14:51:21.805 READ DMA + c8 00 02 78 f6 ad 01 51 5d+14:51:21.800 READ DMA + +Error 15967 occurred at disk power-on lifetime: 2732 hours (113 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 01 7b f6 ad f1 Error: UNC 1 sectors at LBA = 0x01adf67b = 28178043 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 02 7a f6 ad 01 51 5d+14:51:25.650 READ DMA + c8 00 02 7a f6 ad 01 51 5d+14:51:23.720 READ DMA + c8 00 02 7a f6 ad 01 51 5d+14:51:21.805 READ DMA + c8 00 02 78 f6 ad 01 51 5d+14:51:21.800 READ DMA + c8 00 02 76 f6 ad 01 51 5d+14:51:21.800 READ DMA + +Error 15966 occurred at disk power-on lifetime: 2732 hours (113 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 01 7b f6 ad f1 Error: UNC 1 sectors at LBA = 0x01adf67b = 28178043 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 02 7a f6 ad 01 51 5d+14:51:23.720 READ DMA + c8 00 02 7a f6 ad 01 51 5d+14:51:21.805 READ DMA + c8 00 02 78 f6 ad 01 51 5d+14:51:21.800 READ DMA + c8 00 02 76 f6 ad 01 51 5d+14:51:21.800 READ DMA + c8 00 02 74 f6 ad 01 51 5d+14:51:21.800 READ DMA + +Error 15965 occurred at disk power-on lifetime: 2732 hours (113 days + 20 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 40 51 01 7b f6 ad f1 Error: UNC 1 sectors at LBA = 0x01adf67b = 28178043 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + c8 00 02 7a f6 ad 01 51 5d+14:51:21.805 READ DMA + c8 00 02 78 f6 ad 01 51 5d+14:51:21.800 READ DMA + c8 00 02 76 f6 ad 01 51 5d+14:51:21.800 READ DMA + c8 00 02 74 f6 ad 01 51 5d+14:51:21.800 READ DMA + c8 00 02 72 f6 ad 01 51 5d+14:51:21.800 READ DMA + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 38045 - +# 2 Short offline Completed without error 00% 37877 - +# 3 Short offline Completed without error 00% 37780 - +# 4 Short offline Completed without error 00% 37612 - +# 5 Short offline Completed without error 00% 37444 - +# 6 Short offline Completed without error 00% 37277 - +# 7 Short offline Completed without error 00% 37109 - +# 8 Short offline Completed without error 00% 36941 - +# 9 Short offline Completed without error 00% 36773 - +#10 Short offline Completed without error 00% 36606 - +#11 Short offline Completed without error 00% 36438 - +#12 Short offline Completed without error 00% 36270 - +#13 Short offline Completed without error 00% 36102 - +#14 Short offline Completed without error 00% 35935 - +#15 Short offline Completed without error 00% 35767 - +#16 Short offline Completed without error 00% 35599 - +#17 Short offline Completed without error 00% 35432 - +#18 Short offline Completed without error 00% 35264 - +#19 Short offline Completed without error 00% 35096 - +#20 Short offline Completed without error 00% 34928 - +#21 Short offline Completed without error 00% 34761 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/HDD/WDC/WD800/WD800JD-08MSA1/0A17E8C53630 b/HDD/WDC/WD800/WD800JD-08MSA1/0A17E8C53630 new file mode 100644 index 000000000..4735d93ed --- /dev/null +++ b/HDD/WDC/WD800/WD800JD-08MSA1/0A17E8C53630 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Caviar SE Serial ATA +Device Model: WDC WD800JD-08MSA1 +Serial Number: -- +Firmware Version: 10.01E01 +User Capacity: 80,032,038,912 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 (minor revision not indicated) +Local Time is: Wed Aug 19 06:36:01 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2580) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 34) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. +SCT capabilities: (0x103f) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 + 3 Spin_Up_Time PO---- 167 166 021 - 2650 + 4 Start_Stop_Count -O--CK 100 100 000 - 123 + 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 + 7 Seek_Error_Rate POSR-- 200 200 051 - 0 + 9 Power_On_Hours -O--CK 001 001 000 - 112511 + 10 Spin_Retry_Count PO--C- 100 100 051 - 0 + 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 110 +190 Airflow_Temperature_Cel -O---K 075 053 000 - 25 +194 Temperature_Celsius -O---K 118 096 000 - 25 +196 Reallocated_Event_Count -O--CK 200 200 000 - 0 +197 Current_Pending_Sector -O--C- 200 200 000 - 0 +198 Offline_Uncorrectable ----C- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 +200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 5 Comprehensive SMART error log +0x03 GPL R/O 6 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0-0xa7 GPL,SL VS 16 Device vendor specific log +0xa8-0xb7 GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (6 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 46970 - +# 2 Short offline Completed without error 00% 46946 - +# 3 Short offline Completed without error 00% 46922 - +# 4 Short offline Completed without error 00% 46898 - +# 5 Extended offline Completed without error 00% 46876 - +# 6 Short offline Completed without error 00% 46874 - +# 7 Short offline Completed without error 00% 46851 - +# 8 Short offline Completed without error 00% 46827 - +# 9 Short offline Completed without error 00% 46803 - +#10 Short offline Completed without error 00% 46779 - +#11 Short offline Completed without error 00% 46755 - +#12 Short offline Completed without error 00% 46731 - +#13 Extended offline Completed without error 00% 46708 - +#14 Short offline Completed without error 00% 46707 - +#15 Short offline Completed without error 00% 46683 - +#16 Short offline Completed without error 00% 46659 - +#17 Short offline Completed without error 00% 46635 - +#18 Short offline Completed without error 00% 46611 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 2 +SCT Version (vendor specific): 258 (0x0102) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: --/38 Celsius +Lifetime Min/Max Temperature: --/48 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/65 Celsius +Min/Max Temperature Limit: 1/70 Celsius +Temperature History Size (Index): 128 (40) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 43 Device-to-host register FISes sent due to a COMRESET +0x8000 4 25372658 Vendor specific + + + diff --git a/HDD/WDC/WD8001/WD8001FFWX-68J1UN0/BD638538F9D1 b/HDD/WDC/WD8001/WD8001FFWX-68J1UN0/BD638538F9D1 new file mode 100644 index 000000000..a7632c048 --- /dev/null +++ b/HDD/WDC/WD8001/WD8001FFWX-68J1UN0/BD638538F9D1 @@ -0,0 +1,230 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Red Pro +Device Model: WDC WD8001FFWX-68J1UN0 +Serial Number: -- +LU WWN Device Id: 5 000cca ... +Firmware Version: 83.H0A03 +User Capacity: 8,001,563,222,016 bytes [8.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Oct 4 21:30:13 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x84) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1083) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 + 2 Throughput_Performance P-S--- 135 135 054 - 100 + 3 Spin_Up_Time POS--- 156 156 024 - 465 (Average 376) + 4 Start_Stop_Count -O--C- 099 099 000 - 4709 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 + 8 Seek_Time_Performance P-S--- 128 128 020 - 18 + 9 Power_On_Hours -O--C- 096 096 000 - 31119 + 10 Spin_Retry_Count PO--C- 100 100 060 - 0 + 12 Power_Cycle_Count -O--CK 100 100 000 - 107 + 22 Helium_Level PO---K 100 100 025 - 100 +192 Power-Off_Retract_Count -O--CK 095 095 000 - 6366 +193 Load_Cycle_Count -O--C- 095 095 000 - 6366 +194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 16/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O---K 100 100 000 - 0 +198 Offline_Uncorrectable ---R-- 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x12 GPL R/O 1 SATA NCQ Non-Data log +0x15 GPL,SL R/W 1 Rebuild Assist log +0x21 GPL R/O 1 Write stream error log +0x22 GPL R/O 1 Read stream error log +0x24 GPL R/O 256 Current Device Internal Status Data log +0x25 GPL R/O 256 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 30958 - +# 2 Short offline Completed without error 00% 30790 - +# 3 Short offline Completed without error 00% 30644 - +# 4 Short offline Completed without error 00% 30476 - +# 5 Short offline Completed without error 00% 30308 - +# 6 Short offline Interrupted (host reset) 30% 30140 - +# 7 Short offline Completed without error 00% 29972 - +# 8 Short offline Completed without error 00% 29804 - +# 9 Short offline Completed without error 00% 29636 - +#10 Short offline Completed without error 00% 29468 - +#11 Short offline Completed without error 00% 29300 - +#12 Short offline Completed without error 00% 29132 - +#13 Short offline Completed without error 00% 28964 - +#14 Short offline Completed without error 00% 28796 - +#15 Short offline Completed without error 00% 28628 - +#16 Short offline Completed without error 00% 28460 - +#17 Short offline Completed without error 00% 28292 - +#18 Short offline Completed without error 00% 28124 - +#19 Short offline Completed without error 00% 27956 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 43 Celsius +Power Cycle Min/Max Temperature: 40/44 Celsius +Lifetime Min/Max Temperature: 16/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/60 Celsius +Min/Max Temperature Limit: -40/70 Celsius +Temperature History Size (Index): 128 (40) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 107 --- Lifetime Power-On Resets +0x01 0x018 6 35117884991 --- Logical Sectors Written +0x01 0x020 6 297998417 --- Number of Write Commands +0x01 0x028 6 116785559730 --- Logical Sectors Read +0x01 0x030 6 915892313 --- Number of Read Commands +0x01 0x038 6 112031400950 --- Date and Time TimeStamp +0x03 ===== = = === == Rotating Media Statistics (rev 1) == +0x03 0x008 4 30332 --- Spindle Motor Power-on Hours +0x03 0x010 4 30332 --- Head Flying Hours +0x03 0x018 4 6366 --- Head Load Events +0x03 0x020 4 0 --- Number of Reallocated Logical Sectors +0x03 0x028 4 8703184 --- Read Recovery Attempts +0x03 0x030 4 0 --- Number of Mechanical Start Failures +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1932 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 41 N-- Average Short Term Temperature +0x05 0x018 1 40 N-- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 52 N-- Highest Average Short Term Temperature +0x05 0x038 1 22 N-- Lowest Average Short Term Temperature +0x05 0x040 1 45 N-- Highest Average Long Term Temperature +0x05 0x048 1 25 N-- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 60 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 48 --- Number of Hardware Resets +0x06 0x010 4 202 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 49 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 49 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/NVMe/ADATA/SX6000/SX6000LNP 512GB/45B6FD12C14D b/NVMe/ADATA/SX6000/SX6000LNP 512GB/45B6FD12C14D new file mode 100644 index 000000000..98a16ac89 --- /dev/null +++ b/NVMe/ADATA/SX6000/SX6000LNP 512GB/45B6FD12C14D @@ -0,0 +1,58 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: ADATA SX6000LNP +Serial Number: -- +Firmware Version: V9002s51 +PCI Vendor/Subsystem ID: 0x10ec +IEEE OUI Identifier: 0x00e04c +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Fri Oct 9 13:23:53 2020 EDT +Firmware Updates (0x02): 1 Slot +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x0014): DS_Mngmt Sav/Sel_Feat +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 115 Celsius +Critical Comp. Temp. Threshold: 120 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.00W - - 0 0 0 0 0 50000 + 1 + 4.00W - - 1 1 1 1 0 50000 + 2 + 3.00W - - 2 2 2 2 0 50000 + 3 - 0.0500W - - 3 3 3 3 4000 50000 + 4 - 0.0080W - - 4 4 4 4 8000 100000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 30 Celsius +Available Spare: 100% +Available Spare Threshold: 32% +Percentage Used: 0% +Data Units Read: 1,406,709 [720 GB] +Data Units Written: 1,567,397 [802 GB] +Host Read Commands: 6,587,640 +Host Write Commands: 6,668,578 +Controller Busy Time: 0 +Power Cycles: 24 +Power On Hours: 3 +Unsafe Shutdowns: 6 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 8 entries) +No Errors Logged + diff --git a/NVMe/ADATA/SX8200/SX8200PNP 1TB/720415F6EBAD b/NVMe/ADATA/SX8200/SX8200PNP 1TB/720415F6EBAD new file mode 100644 index 000000000..92d781aeb --- /dev/null +++ b/NVMe/ADATA/SX8200/SX8200PNP 1TB/720415F6EBAD @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: ADATA SX8200PNP +Serial Number: -- +Firmware Version: S0118C +PCI Vendor/Subsystem ID: 0x1cc1 +IEEE OUI Identifier: 0x000000 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Tue Jul 7 08:19:47 2020 CEST +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0016): Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 75 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 0 0 + 1 + 4.60W - - 1 1 1 1 0 0 + 2 + 3.80W - - 2 2 2 2 0 0 + 3 - 0.0450W - - 3 3 3 3 2000 2000 + 4 - 0.0040W - - 4 4 4 4 6000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 36 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 8% +Data Units Read: 9,540,393 [4.88 TB] +Data Units Written: 20,168,951 [10.3 TB] +Host Read Commands: 112,519,126 +Host Write Commands: 508,292,955 +Controller Busy Time: 8,740 +Power Cycles: 417 +Power On Hours: 5,492 +Unsafe Shutdowns: 94 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Thermal Temp. 1 Transition Count: 26 +Thermal Temp. 2 Transition Count: 13 +Thermal Temp. 1 Total Time: 194 +Thermal Temp. 2 Total Time: 166 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + + + diff --git a/NVMe/ADATA/SX8200/SX8200PNP 1TB/B527D04165EF b/NVMe/ADATA/SX8200/SX8200PNP 1TB/B527D04165EF new file mode 100644 index 000000000..090ddca0f --- /dev/null +++ b/NVMe/ADATA/SX8200/SX8200PNP 1TB/B527D04165EF @@ -0,0 +1,60 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: ADATA SX8200PNP +Serial Number: -- +Firmware Version: S0118C +PCI Vendor/Subsystem ID: 0x1cc1 +IEEE OUI Identifier: 0x000000 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Tue Jul 7 08:19:47 2020 CEST +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0016): Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 75 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 0 0 + 1 + 4.60W - - 1 1 1 1 0 0 + 2 + 3.80W - - 2 2 2 2 0 0 + 3 - 0.0450W - - 3 3 3 3 2000 2000 + 4 - 0.0040W - - 4 4 4 4 6000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 37 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 8% +Data Units Read: 10,205,673 [5.22 TB] +Data Units Written: 19,955,270 [10.2 TB] +Host Read Commands: 114,477,867 +Host Write Commands: 509,319,453 +Controller Busy Time: 8,706 +Power Cycles: 410 +Power On Hours: 5,465 +Unsafe Shutdowns: 92 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Thermal Temp. 1 Transition Count: 2 +Thermal Temp. 1 Total Time: 57 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/BIWIN/NE/NE-256/6C1A900A753B b/NVMe/BIWIN/NE/NE-256/6C1A900A753B new file mode 100644 index 000000000..7c3a5d760 --- /dev/null +++ b/NVMe/BIWIN/NE/NE-256/6C1A900A753B @@ -0,0 +1,73 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: NE-256 +Serial Number: -- +Firmware Version: R0629A0 +PCI Vendor ID: 0x1dee +PCI Vendor Subsystem ID: 0x126f +IEEE OUI Identifier: 0x000000 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 010000 ... +Local Time is: Fri Oct 30 07:09:33 2020 AEDT +Firmware Updates (0x06): 3 Slots +Optional Admin Commands (0x0006): Format Frmw_DL +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 70 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 0 0 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 36 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 31,808 [16.2 GB] +Data Units Written: 26,191 [13.4 GB] +Host Read Commands: 2,127,641 +Host Write Commands: 311,980 +Controller Busy Time: 34 +Power Cycles: 13 +Power On Hours: 0 +Unsafe Shutdowns: 9 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 256 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 281475018785081 584 0x0435 0x000e 0x000 34359738368 4336 0x1e + 1 8761733283848 255 0x0282 0x0000 0x001 60211397184 0 - + 2 14 0 0x0000 0x0d10 0x000 281475018785186 77398232 0x0e + 3 315254585256116224 14 0x0100 0x0000 0x000 14912126451720 42074546 - + 4 180708249308236176 0 0x0001 0x02c0 0x43f 14 8 0xe8 + 5 34359738368 31392 0x0001 0x2f54 0x121 310185664853311511 19 - + 6 72057684299350632 256 0x0000 0x0008 0x000 180708683099933880 65536 0x18 + 7 281479313752611 680 0x04ed 0x001a 0x000 34359738368 3192 0x8f + 8 14259291422720 415 0x0282 0x0000 0x001 60203008568 0 0x08 + 9 18 8 0x0000 0x0718 0x000 281475018784995 81527320 0x0e + 10 295268624959078400 14 0x0000 0x0000 0x000 34531537059848 42075117 0x01 + 11 81398301798267544 23 0x0000 0x0040 0x44f 19 8 0xe8 + 13 60197044352 0 0x0000 0x0008 0x000 180711234310512456 1 0xf8 + 14 90211101385 72 0x0450 0x0012 0x000 0 3432 0xad + 15 14602888806408 425 0x0282 0x0000 0x001 60199404008 0 0x08 + 16 18 8 0x0000 0x0678 0x000 281475018784975 81461776 0x0e +... (66 entries not shown) + diff --git a/NVMe/Corsair/Force MP300/Force MP300 120GB/F4CBFF7DF93A b/NVMe/Corsair/Force MP300/Force MP300 120GB/F4CBFF7DF93A new file mode 100644 index 000000000..305682eaa --- /dev/null +++ b/NVMe/Corsair/Force MP300/Force MP300 120GB/F4CBFF7DF93A @@ -0,0 +1,78 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Force MP300 +Serial Number: -- +Firmware Version: E8FM11.7 +PCI Vendor/Subsystem ID: 0x1987 +IEEE OUI Identifier: 0x000000 +Total NVM Capacity: 120,034,123,776 [120 GB] +Unallocated NVM Capacity: 0 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 120,034,123,776 [120 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Wed Aug 19 09:56:38 2020 IST +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 90 Celsius +Critical Comp. Temp. Threshold: 94 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 3.00W - - 0 0 0 0 0 0 + 1 + 2.00W - - 1 1 1 1 0 0 + 2 + 2.00W - - 2 2 2 2 0 0 + 3 - 0.1000W - - 3 3 3 3 1000 1000 + 4 - 0.0050W - - 4 4 4 4 400000 90000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 1 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 49 Celsius +Available Spare: 100% +Available Spare Threshold: 50% +Percentage Used: 1% +Data Units Read: 2,508,544 [1.28 TB] +Data Units Written: 1,833,220 [938 GB] +Host Read Commands: 53,139,717 +Host Write Commands: 60,455,137 +Controller Busy Time: 368 +Power Cycles: 17 +Power On Hours: 2,453 +Unsafe Shutdowns: 11 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 50 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 2: 49 Celsius + +Error Information (NVMe Log 0x01, max 16 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 50 0 0x0004 0x0203 - 0 0 - + 1 49 0 0x0004 0x0203 - 0 0 - + 2 48 0 0x0004 0x0203 - 0 0 - + 3 47 0 0x0004 0x0203 - 0 0 - + 4 46 0 0x0004 0x0203 - 0 0 - + 5 45 0 0x0004 0x0203 - 0 0 - + 6 44 0 0x0004 0x0203 - 0 0 - + 7 43 0 0x0004 0x0203 - 0 0 - + 8 42 0 0x0004 0x0203 - 0 0 - + 9 41 0 0x0004 0x0203 - 0 0 - + 10 40 0 0x0004 0x0203 - 0 0 - + 11 39 0 0x0004 0x0203 - 0 0 - + 12 38 0 0x0004 0x0203 - 0 0 - + 13 37 0 0x0004 0x0203 - 0 0 - + 14 36 0 0x0004 0x0203 - 0 0 - + 15 35 0 0x0004 0x0203 - 0 0 - + diff --git a/NVMe/Corsair/Force MP600/Force MP600 2TB/B51DFBBF45D9 b/NVMe/Corsair/Force MP600/Force MP600 2TB/B51DFBBF45D9 new file mode 100644 index 000000000..f2dc042cf --- /dev/null +++ b/NVMe/Corsair/Force MP600/Force MP600 2TB/B51DFBBF45D9 @@ -0,0 +1,62 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Force MP600 +Serial Number: -- +Firmware Version: EGFM11.2 +PCI Vendor/Subsystem ID: 0x1987 +IEEE OUI Identifier: 0x6479a7 +Total NVM Capacity: 2,000,398,934,016 [2.00 TB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 2,000,398,934,016 [2.00 TB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 6479a7 ... +Local Time is: Thu Oct 29 14:35:49 2020 CET +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 70 Celsius +Critical Comp. Temp. Threshold: 90 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 10.73W - - 0 0 0 0 0 0 + 1 + 7.69W - - 1 1 1 1 0 0 + 2 + 6.18W - - 2 2 2 2 0 0 + 3 - 0.0490W - - 3 3 3 3 2000 2000 + 4 - 0.0018W - - 4 4 4 4 25000 25000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 42 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 1% +Data Units Read: 57,628,266 [29.5 TB] +Data Units Written: 61,137,680 [31.3 TB] +Host Read Commands: 354,987,450 +Host Write Commands: 538,381,000 +Controller Busy Time: 1,054 +Power Cycles: 27 +Power On Hours: 7,405 +Unsafe Shutdowns: 9 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 65 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 63 entries) +No Errors Logged + diff --git a/NVMe/Corsair/Force MP600/Force MP600 500GB/78E7FA9AEE5A b/NVMe/Corsair/Force MP600/Force MP600 500GB/78E7FA9AEE5A new file mode 100644 index 000000000..4d4ebd4be --- /dev/null +++ b/NVMe/Corsair/Force MP600/Force MP600 500GB/78E7FA9AEE5A @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-PRERELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Force MP600 +Serial Number: -- +Firmware Version: EGFM11.3 +PCI Vendor/Subsystem ID: 0x1987 +IEEE OUI Identifier: 0x6479a7 +Total NVM Capacity: 500,107,862,016 [500 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] +Namespace 1 Formatted LBA Size: 4096 +Namespace 1 IEEE EUI-64: 6479a7 ... +Local Time is: Sat Oct 31 07:38:54 2020 PDT +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 90 Celsius +Critical Comp. Temp. Threshold: 95 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.14W - - 0 0 0 0 0 0 + 1 + 5.43W - - 1 1 1 1 0 0 + 2 + 4.57W - - 2 2 2 2 0 0 + 3 - 0.0490W - - 3 3 3 3 2000 2000 + 4 - 0.0018W - - 4 4 4 4 25000 25000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 - 512 0 2 + 1 + 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 30 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 0% +Data Units Read: 323,353 [165 GB] +Data Units Written: 1,430,928 [732 GB] +Host Read Commands: 8,941,587 +Host Write Commands: 14,045,568 +Controller Busy Time: 20 +Power Cycles: 403 +Power On Hours: 2,185 +Unsafe Shutdowns: 370 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 371 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 63 entries) +No Errors Logged + + + diff --git a/NVMe/Crucial/CT1000/CT1000P1SSD8/472165567C94 b/NVMe/Crucial/CT1000/CT1000P1SSD8/472165567C94 new file mode 100644 index 000000000..5b1d795cb --- /dev/null +++ b/NVMe/Crucial/CT1000/CT1000P1SSD8/472165567C94 @@ -0,0 +1,62 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: CT1000P1SSD8 +Serial Number: -- +Firmware Version: P3CR013 +PCI Vendor/Subsystem ID: 0xc0a9 +IEEE OUI Identifier: 0x00a075 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 00a075 ... +Local Time is: Thu Aug 6 16:29:54 2020 CEST +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0016): Format Frmw_DL Self_Test +Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 70 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 5 5 + 1 + 4.60W - - 1 1 1 1 30 30 + 2 + 3.80W - - 2 2 2 2 30 30 + 3 - 0.0500W - - 3 3 3 3 1000 1000 + 4 - 0.0040W - - 4 4 4 4 6000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 42 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 113,535 [58.1 GB] +Data Units Written: 1,894,610 [970 GB] +Host Read Commands: 3,150,892 +Host Write Commands: 71,222,552 +Controller Busy Time: 343 +Power Cycles: 256 +Power On Hours: 1,689 +Unsafe Shutdowns: 17 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 44 Celsius +Temperature Sensor 2: 40 Celsius +Temperature Sensor 5: 49 Celsius + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/Crucial/CT1000/CT1000P1SSD8/7F9391EAB2DD b/NVMe/Crucial/CT1000/CT1000P1SSD8/7F9391EAB2DD new file mode 100644 index 000000000..81937dd6a --- /dev/null +++ b/NVMe/Crucial/CT1000/CT1000P1SSD8/7F9391EAB2DD @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: CT1000P1SSD8 +Serial Number: -- +Firmware Version: P3CR010 +PCI Vendor/Subsystem ID: 0xc0a9 +IEEE OUI Identifier: 0x000000 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Thu Aug 6 10:06:59 2020 -03 +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0016): Format Frmw_DL Self_Test +Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 70 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 5 5 + 1 + 4.60W - - 1 1 1 1 30 30 + 2 + 3.80W - - 2 2 2 2 30 30 + 3 - 0.0500W - - 3 3 3 3 1000 1000 + 4 - 0.0040W - - 4 4 4 4 6000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 47 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 1,568,723 [803 GB] +Data Units Written: 4,279,035 [2.19 TB] +Host Read Commands: 24,321,069 +Host Write Commands: 114,463,430 +Controller Busy Time: 1,070 +Power Cycles: 504 +Power On Hours: 1,256 +Unsafe Shutdowns: 270 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 48 Celsius +Temperature Sensor 2: 47 Celsius +Temperature Sensor 5: 54 Celsius +Thermal Temp. 1 Transition Count: 15 +Thermal Temp. 1 Total Time: 10884 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/Crucial/CT1000/CT1000P1SSD8/856475B1B4C6 b/NVMe/Crucial/CT1000/CT1000P1SSD8/856475B1B4C6 new file mode 100644 index 000000000..d9967c4c4 --- /dev/null +++ b/NVMe/Crucial/CT1000/CT1000P1SSD8/856475B1B4C6 @@ -0,0 +1,60 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: CT1000P1SSD8 +Serial Number: -- +Firmware Version: P3CR020 +PCI Vendor/Subsystem ID: 0xc0a9 +IEEE OUI Identifier: 0x00a075 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 00a075 ... +Local Time is: Wed Oct 28 13:56:34 2020 PDT +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 87 Celsius +Critical Comp. Temp. Threshold: 90 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 5 5 + 1 + 4.60W - - 1 1 1 1 30 30 + 2 + 3.80W - - 2 2 2 2 30 30 + 3 - 0.0300W - - 3 3 3 3 1000 1000 + 4 - 0.0030W - - 4 4 4 4 6000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 49 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 0% +Data Units Read: 183,252 [93.8 GB] +Data Units Written: 2,119,995 [1.08 TB] +Host Read Commands: 1,861,139 +Host Write Commands: 94,188,189 +Controller Busy Time: 245 +Power Cycles: 5 +Power On Hours: 1,219 +Unsafe Shutdowns: 1 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 49 Celsius + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/Crucial/CT1000/CT1000P1SSD8/DDFC64A5DEA0 b/NVMe/Crucial/CT1000/CT1000P1SSD8/DDFC64A5DEA0 new file mode 100644 index 000000000..cc38d978e --- /dev/null +++ b/NVMe/Crucial/CT1000/CT1000P1SSD8/DDFC64A5DEA0 @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: CT1000P1SSD8 +Serial Number: -- +Firmware Version: P3CR010 +PCI Vendor/Subsystem ID: 0xc0a9 +IEEE OUI Identifier: 0x000000 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Thu Aug 6 08:39:07 2020 CEST +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0016): Format Frmw_DL Self_Test +Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 70 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 5 5 + 1 + 4.60W - - 1 1 1 1 30 30 + 2 + 3.80W - - 2 2 2 2 30 30 + 3 - 0.0500W - - 3 3 3 3 1000 1000 + 4 - 0.0040W - - 4 4 4 4 6000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 52 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 9% +Data Units Read: 21,644,037 [11.0 TB] +Data Units Written: 51,769,996 [26.5 TB] +Host Read Commands: 243,851,195 +Host Write Commands: 716,005,346 +Controller Busy Time: 7,969 +Power Cycles: 2,135 +Power On Hours: 5,872 +Unsafe Shutdowns: 540 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 53 Celsius +Temperature Sensor 2: 51 Celsius +Temperature Sensor 5: 62 Celsius +Thermal Temp. 1 Transition Count: 184 +Thermal Temp. 1 Total Time: 135126 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/HP/SSD EX900/SSD EX900 120GB/9FEA7A20C143 b/NVMe/HP/SSD EX900/SSD EX900 120GB/9FEA7A20C143 new file mode 100644 index 000000000..ccefd4927 --- /dev/null +++ b/NVMe/HP/SSD EX900/SSD EX900 120GB/9FEA7A20C143 @@ -0,0 +1,73 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: HP SSD EX900 120GB +Serial Number: -- +Firmware Version: R0802A0 +PCI Vendor ID: 0x128f +PCI Vendor Subsystem ID: 0x126f +IEEE OUI Identifier: 0x000000 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 120,034,123,776 [120 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 010000 ... +Local Time is: Fri Aug 14 14:24:56 2020 CDT +Firmware Updates (0x06): 3 Slots +Optional Admin Commands (0x0006): Format Frmw_DL +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 70 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 0 0 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 54 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 1% +Data Units Read: 74,111 [37.9 GB] +Data Units Written: 8,201,087 [4.19 TB] +Host Read Commands: 347,489 +Host Write Commands: 84,082,516 +Controller Busy Time: 166,573,568 +Power Cycles: 122 +Power On Hours: 14,189 +Unsafe Shutdowns: 74 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 256 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 24 18446744073709551615 0 0x0000 0x0000 0x000 0 0 - + 25 18446744073709551615 - - - - - - 0xff + 45 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 46 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 47 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 48 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 49 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 50 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 51 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 52 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 53 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 54 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 55 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 56 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 57 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - + 58 4607182419872710656 0 0x3ff0 0x0000 0x3ff0 4607182419872710656 1072693248 - +... (104 entries not shown) + diff --git a/NVMe/HP/SSD EX920/SSD EX920 512GB/B3F61D287734 b/NVMe/HP/SSD EX920/SSD EX920 512GB/B3F61D287734 new file mode 100644 index 000000000..263f7d565 --- /dev/null +++ b/NVMe/HP/SSD EX920/SSD EX920 512GB/B3F61D287734 @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: HP SSD EX920 512GB +Serial Number: -- +Firmware Version: SVN139B +PCI Vendor ID: 0x1dee +PCI Vendor Subsystem ID: 0x126f +IEEE OUI Identifier: 0x000000 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Fri Aug 14 14:24:56 2020 CDT +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0016): Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 70 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 0 0 + 1 + 4.60W - - 1 1 1 1 0 0 + 2 + 3.80W - - 2 2 2 2 0 0 + 3 - 0.0450W - - 3 3 3 3 2000 2000 + 4 - 0.0040W - - 4 4 4 4 6000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 29 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 12,471,203 [6.38 TB] +Data Units Written: 65,780,229 [33.6 TB] +Host Read Commands: 221,315,982 +Host Write Commands: 279,144,283 +Controller Busy Time: 10,674 +Power Cycles: 122 +Power On Hours: 12,765 +Unsafe Shutdowns: 52 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 39 +Critical Comp. Temperature Time: 0 +Thermal Temp. 1 Transition Count: 70 +Thermal Temp. 1 Total Time: 2476 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + + + diff --git a/NVMe/Intel/HBRPEKNX0202/HBRPEKNX0202AH/A706E4969CB4 b/NVMe/Intel/HBRPEKNX0202/HBRPEKNX0202AH/A706E4969CB4 new file mode 100644 index 000000000..0556051b5 --- /dev/null +++ b/NVMe/Intel/HBRPEKNX0202/HBRPEKNX0202AH/A706E4969CB4 @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: INTEL HBRPEKNX0202AH +Serial Number: -- +Firmware Version: HPS1 +PCI Vendor/Subsystem ID: 0x8086 +IEEE OUI Identifier: 0x5cd2e4 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 5cd2e4 ... +Local Time is: Mon Aug 24 05:30:59 2020 PDT +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0016): Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 77 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 3.50W - - 0 0 0 0 0 0 + 1 + 2.70W - - 1 1 1 1 0 0 + 2 + 2.00W - - 2 2 2 2 0 0 + 3 - 0.0250W - - 3 3 3 3 2000 5000 + 4 - 0.0040W - - 4 4 4 4 5000 9000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 34 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 5% +Data Units Read: 4,755,790 [2.43 TB] +Data Units Written: 12,830,057 [6.56 TB] +Host Read Commands: 59,856,009 +Host Write Commands: 231,336,236 +Controller Busy Time: 3,312 +Power Cycles: 1,712 +Power On Hours: 1,934 +Unsafe Shutdowns: 284 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Thermal Temp. 1 Transition Count: 1 +Thermal Temp. 1 Total Time: 37 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + + + diff --git a/NVMe/Intel/HBRPEKNX0202/HBRPEKNX0202AHO/9BEBB80B2874 b/NVMe/Intel/HBRPEKNX0202/HBRPEKNX0202AHO/9BEBB80B2874 new file mode 100644 index 000000000..9b4a18ed9 --- /dev/null +++ b/NVMe/Intel/HBRPEKNX0202/HBRPEKNX0202AHO/9BEBB80B2874 @@ -0,0 +1,57 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: INTEL HBRPEKNX0202AHO +Serial Number: -- +Firmware Version: HPS2 +PCI Vendor/Subsystem ID: 0x8086 +IEEE OUI Identifier: 0x5cd2e4 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 29,260,513,280 [29.2 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 5cd2e4 ... +Local Time is: Mon Aug 24 05:30:59 2020 PDT +Firmware Updates (0x02): 1 Slot +Optional Admin Commands (0x0006): Format Frmw_DL +Optional NVM Commands (0x0046): Wr_Unc DS_Mngmt Timestmp +Maximum Data Transfer Size: 32 Pages + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 2.80W - - 0 0 0 0 1000000 30000 + 1 + 2.20W - - 0 1 0 1 1000000 30000 + 2 + 1.80W - - 0 2 0 2 1000000 30000 + 3 - 0.0080W - - 0 0 0 0 1150000 30000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 36 Celsius +Available Spare: 100% +Available Spare Threshold: 0% +Percentage Used: 0% +Data Units Read: 55,169 [28.2 GB] +Data Units Written: 526,857 [269 GB] +Host Read Commands: 1,362,969 +Host Write Commands: 9,896,439 +Controller Busy Time: 0 +Power Cycles: 1,681 +Power On Hours: 1,945 +Unsafe Shutdowns: 252 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 3 + +Error Information (NVMe Log 0x01, max 64 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 3 1 - 0xc00c - 0 - - + 1 2 1 - 0xc00c - 0 - - + 2 1 1 - 0xc00c - 0 - - + diff --git a/NVMe/Intel/SSDPED1/SSDPED1D480GA/C94327B67965 b/NVMe/Intel/SSDPED1/SSDPED1D480GA/C94327B67965 new file mode 100644 index 000000000..46d1faa6c --- /dev/null +++ b/NVMe/Intel/SSDPED1/SSDPED1D480GA/C94327B67965 @@ -0,0 +1,50 @@ +smartctl 7.1 2019-12-30 r5022 [MidnightBSD 1.2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: INTEL SSDPED1D480GA +Serial Number: -- +Firmware Version: E2010325 +PCI Vendor/Subsystem ID: 0x8086 +IEEE OUI Identifier: 0x5cd2e4 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 480,103,981,056 [480 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Thu Jul 30 20:59:29 2020 EDT +Firmware Updates (0x02): 1 Slot +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x0006): Wr_Unc DS_Mngmt +Maximum Data Transfer Size: 32 Pages + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 18.00W - - 0 0 0 0 0 0 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 42 Celsius +Available Spare: 100% +Available Spare Threshold: 0% +Percentage Used: 0% +Data Units Read: 827,705 [423 GB] +Data Units Written: 5,692,122 [2.91 TB] +Host Read Commands: 92,665,187 +Host Write Commands: 42,944,583 +Controller Busy Time: 34 +Power Cycles: 16 +Power On Hours: 7,176 +Unsafe Shutdowns: 13 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Intel/SSDPEDMW800/SSDPEDMW800G4/062A311A2DB5 b/NVMe/Intel/SSDPEDMW800/SSDPEDMW800G4/062A311A2DB5 new file mode 100644 index 000000000..64af34fb6 --- /dev/null +++ b/NVMe/Intel/SSDPEDMW800/SSDPEDMW800G4/062A311A2DB5 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: INTEL SSDPEDMW800G4 +Serial Number: -- +Firmware Version: 8EV101H0 +PCI Vendor/Subsystem ID: 0x8086 +IEEE OUI Identifier: 0x5cd2e4 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 800,166,076,416 [800 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Wed Oct 21 19:50:29 2020 PDT +Firmware Updates (0x02): 1 Slot +Optional Admin Commands (0x0006): Format Frmw_DL +Optional NVM Commands (0x0006): Wr_Unc DS_Mngmt +Maximum Data Transfer Size: 32 Pages + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 25.00W - - 0 0 0 0 0 0 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 512 8 2 + 2 - 512 16 2 + 3 - 4096 0 0 + 4 - 4096 8 0 + 5 - 4096 64 0 + 6 - 4096 128 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 42 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 1% +Data Units Read: 12,979,764 [6.64 TB] +Data Units Written: 20,149,456 [10.3 TB] +Host Read Commands: 262,744,605 +Host Write Commands: 312,424,692 +Controller Busy Time: 0 +Power Cycles: 1,221 +Power On Hours: 4,044 +Unsafe Shutdowns: 0 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 + +Error Information (NVMe Log 0x01, max 64 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 8 0 - 0x400c - 0 - - + 1 7 0 - 0x400c - 0 - - + 2 6 0 - 0x400c - 0 - - + 3 5 0 - 0x400c - 0 - - + 4 4 0 - 0x400c - 0 - - + 5 3 0 - 0x400c - 0 - - + 6 2 0 - 0x400c - 0 - - + 7 1 0 - 0x400c - 0 - - + diff --git a/NVMe/Intel/SSDPEKKF512/SSDPEKKF512G8L/BFC3C6089EF9 b/NVMe/Intel/SSDPEKKF512/SSDPEKKF512G8L/BFC3C6089EF9 new file mode 100644 index 000000000..e4c72f038 --- /dev/null +++ b/NVMe/Intel/SSDPEKKF512/SSDPEKKF512G8L/BFC3C6089EF9 @@ -0,0 +1,59 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: INTEL SSDPEKKF512G8L +Serial Number: -- +Firmware Version: L13P +PCI Vendor/Subsystem ID: 0x8086 +IEEE OUI Identifier: 0x5cd2e4 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 5cd2e4 ... +Local Time is: Sat Oct 3 18:11:42 2020 EDT +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 75 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 0 0 + 1 + 4.60W - - 1 1 1 1 0 0 + 2 + 3.80W - - 2 2 2 2 0 0 + 3 - 0.0450W - - 3 3 3 3 2000 2000 + 4 - 0.0040W - - 4 4 4 4 6000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 36 Celsius +Available Spare: 100% +Available Spare Threshold: 12% +Percentage Used: 0% +Data Units Read: 3,209,523 [1.64 TB] +Data Units Written: 372,635 [190 GB] +Host Read Commands: 8,136,225 +Host Write Commands: 3,333,061 +Controller Busy Time: 74 +Power Cycles: 144 +Power On Hours: 24 +Unsafe Shutdowns: 86 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/Intel/SSDPEKNW512/SSDPEKNW512G8/B10CE195512D b/NVMe/Intel/SSDPEKNW512/SSDPEKNW512G8/B10CE195512D new file mode 100644 index 000000000..42ea2b5a3 --- /dev/null +++ b/NVMe/Intel/SSDPEKNW512/SSDPEKNW512G8/B10CE195512D @@ -0,0 +1,58 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: INTEL SSDPEKNW512G8 +Serial Number: -- +Firmware Version: 002C +PCI Vendor/Subsystem ID: 0x8086 +IEEE OUI Identifier: 0x5cd2e4 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Sun Aug 2 00:20:47 2020 BST +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 77 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 3.50W - - 0 0 0 0 0 0 + 1 + 2.70W - - 1 1 1 1 0 0 + 2 + 2.00W - - 2 2 2 2 0 0 + 3 - 0.0250W - - 3 3 3 3 5000 5000 + 4 - 0.0040W - - 4 4 4 4 5000 9000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 35 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 2% +Data Units Read: 14,033,460 [7.18 TB] +Data Units Written: 14,819,964 [7.58 TB] +Host Read Commands: 320,801,474 +Host Write Commands: 150,903,700 +Controller Busy Time: 3,060 +Power Cycles: 58 +Power On Hours: 1,126 +Unsafe Shutdowns: 32 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/Kingston/RBUSNS8154/RBUSNS8154P3512GJ/DCA288457306 b/NVMe/Kingston/RBUSNS8154/RBUSNS8154P3512GJ/DCA288457306 new file mode 100644 index 000000000..8c843bbb6 --- /dev/null +++ b/NVMe/Kingston/RBUSNS8154/RBUSNS8154P3512GJ/DCA288457306 @@ -0,0 +1,79 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: KINGSTON RBUSNS8154P3512GJ +Serial Number: -- +Firmware Version: E8FK11.C +PCI Vendor/Subsystem ID: 0x2646 +IEEE OUI Identifier: 0x0026b7 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 0026b7 ... +Local Time is: Thu Aug 6 16:29:54 2020 CEST +Firmware Updates (0x02): 1 Slot +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.90W 0.0790W - 0 0 0 0 600 600 + 1 + 7.90W 0.0790W - 0 0 0 0 600 600 + 2 + 7.90W 0.0790W - 0 0 0 0 600 600 + 3 - 0.1000W 0.0790W - 3 3 3 3 1000 1000 + 4 - 0.0050W 0.0790W - 4 4 4 4 400000 90000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 1 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 45 Celsius +Available Spare: 100% +Available Spare Threshold: 100% +Percentage Used: 0% +Data Units Read: 3,873,101 [1.98 TB] +Data Units Written: 5,681,744 [2.90 TB] +Host Read Commands: 69,749,062 +Host Write Commands: 101,259,172 +Controller Busy Time: 444 +Power Cycles: 1,679 +Power On Hours: 605 +Unsafe Shutdowns: 113 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 23 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 2: 45 Celsius + +Error Information (NVMe Log 0x01, max 16 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 25 0 0x0018 0x0005 - 33555712 0 - + 1 22 0 0x0014 0x0005 - 33555712 0 - + 2 21 - - 0x0000 - - - 0xff + 3 20 - - 0x0000 - - - 0xff + 4 19 - - 0x0000 - - - 0xff + 5 16 - - 0x0000 - - - 0xff + 6 14 - - 0x0000 - - - 0xff + 7 13 - - 0x0000 - - - 0xff + 8 12 - - 0x0000 - - - 0xff + 9 11 - - 0x0000 - - - 0xff + 10 10 - - 0x0000 - - - 0xff + 11 8 - - 0x0000 - - - 0xff + 12 2 0 0x0007 0x0005 - 33555456 0 - + 13 1 0 0x0015 0x0005 - 33555712 0 - + + + diff --git a/NVMe/Lite-On/CA3/CA3-8D512/7E32956C3542 b/NVMe/Lite-On/CA3/CA3-8D512/7E32956C3542 new file mode 100644 index 000000000..d858865aa --- /dev/null +++ b/NVMe/Lite-On/CA3/CA3-8D512/7E32956C3542 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: LITEON CA3-8D512 +Serial Number: -- +Firmware Version: C490903 +PCI Vendor ID: 0x14a4 +PCI Vendor Subsystem ID: 0x1b4b +IEEE OUI Identifier: 0x002303 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002303 ... +Local Time is: Mon Aug 17 08:32:31 2020 EDT +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x001f): Security Format Frmw_DL NS_Mngmt Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 83 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.00W - - 0 0 0 0 0 0 + 1 + 4.50W - - 1 1 1 1 5 5 + 2 + 3.00W - - 2 2 2 2 5 5 + 3 - 0.0700W - - 3 3 3 3 1000 5000 + 4 - 0.0100W - - 4 4 4 4 5000 50000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 - 512 0 1 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 46 Celsius +Available Spare: 100% +Available Spare Threshold: 0% +Percentage Used: 0% +Data Units Read: 5,371,640 [2.75 TB] +Data Units Written: 5,248,216 [2.68 TB] +Host Read Commands: 101,766,479 +Host Write Commands: 75,780,091 +Controller Busy Time: 8,227 +Power Cycles: 609 +Power On Hours: 263 +Unsafe Shutdowns: 91 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 46 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Micron/2200/2200V_MTFDHBA512TCK/382F0B471B48 b/NVMe/Micron/2200/2200V_MTFDHBA512TCK/382F0B471B48 new file mode 100644 index 000000000..bada998bf --- /dev/null +++ b/NVMe/Micron/2200/2200V_MTFDHBA512TCK/382F0B471B48 @@ -0,0 +1,61 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Micron_2200V_MTFDHBA512TCK +Serial Number: -- +Firmware Version: P1MA0V4 +PCI Vendor/Subsystem ID: 0x1344 +IEEE OUI Identifier: 0x00a075 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 00a075 ... +Local Time is: Thu Oct 15 19:16:32 2020 CEST +Firmware Updates (0x02): 1 Slot +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x0017): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat +Maximum Data Transfer Size: 128 Pages +Warning Comp. Temp. Threshold: 82 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.25W - - 0 0 0 0 0 0 + 1 + 2.40W - - 1 1 1 1 0 0 + 2 + 1.90W - - 2 2 2 2 0 0 + 3 - 0.0800W - - 3 3 3 3 10000 2500 + 4 - 0.0050W - - 4 4 4 4 5000 44000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 48 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 0% +Data Units Read: 1,330,726 [681 GB] +Data Units Written: 2,440,745 [1.24 TB] +Host Read Commands: 11,740,249 +Host Write Commands: 16,458,168 +Controller Busy Time: 380 +Power Cycles: 361 +Power On Hours: 178 +Unsafe Shutdowns: 30 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 48 Celsius +Temperature Sensor 2: 51 Celsius + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/ORICO/V500/V500 1TB/66EA9B8A54A7 b/NVMe/ORICO/V500/V500 1TB/66EA9B8A54A7 new file mode 100644 index 000000000..697ba2670 --- /dev/null +++ b/NVMe/ORICO/V500/V500 1TB/66EA9B8A54A7 @@ -0,0 +1,55 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: ORICO V500 1TB +Serial Number: -- +Firmware Version: S0614C0G +PCI Vendor/Subsystem ID: 0x126f +IEEE OUI Identifier: 0x000000 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Mon Oct 5 00:16:29 2020 -05 +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 90 Celsius +Namespace 1 Features (0x04): Dea/Unw_Error + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.00W - - 0 0 0 0 0 0 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 43 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 9,379,864 [4.80 TB] +Data Units Written: 5,744,589 [2.94 TB] +Host Read Commands: 86,006,841 +Host Write Commands: 153,266,079 +Controller Busy Time: 9,192 +Power Cycles: 462 +Power On Hours: 3,580 +Unsafe Shutdowns: 38 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Phison/PCIe/PCIe SSD/FF2AEE215087 b/NVMe/Phison/PCIe/PCIe SSD/FF2AEE215087 new file mode 100644 index 000000000..37ec46c8c --- /dev/null +++ b/NVMe/Phison/PCIe/PCIe SSD/FF2AEE215087 @@ -0,0 +1,62 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: PCIe SSD +Serial Number: -- +Firmware Version: ECFM12.5 +PCI Vendor/Subsystem ID: 0x1987 +IEEE OUI Identifier: 0x6479a7 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 6479a7 ... +Local Time is: Tue Oct 27 21:39:43 2020 PDT +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 75 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.12W - - 0 0 0 0 0 0 + 1 + 6.40W - - 1 1 1 1 0 0 + 2 + 5.54W - - 2 2 2 2 0 0 + 3 - 0.0490W - - 3 3 3 3 2000 2000 + 4 - 0.0018W - - 4 4 4 4 25000 25000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 28 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 0% +Data Units Read: 190,146 [97.3 GB] +Data Units Written: 978,074 [500 GB] +Host Read Commands: 4,457,302 +Host Write Commands: 18,646,329 +Controller Busy Time: 10 +Power Cycles: 76 +Power On Hours: 262 +Unsafe Shutdowns: 21 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 283 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 63 entries) +No Errors Logged + diff --git a/NVMe/Phison/Sabrent Rocket 4/Sabrent Rocket 4.0 1TB/957A773CD755 b/NVMe/Phison/Sabrent Rocket 4/Sabrent Rocket 4.0 1TB/957A773CD755 new file mode 100644 index 000000000..36d05defa --- /dev/null +++ b/NVMe/Phison/Sabrent Rocket 4/Sabrent Rocket 4.0 1TB/957A773CD755 @@ -0,0 +1,62 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-PRERELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Sabrent Rocket 4.0 1TB +Serial Number: -- +Firmware Version: RKT401.2 +PCI Vendor/Subsystem ID: 0x1987 +IEEE OUI Identifier: 0x6479a7 +Total NVM Capacity: 1,000,204,886,016 [1.00 TB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] +Namespace 1 Formatted LBA Size: 4096 +Namespace 1 IEEE EUI-64: 6479a7 ... +Local Time is: Sat Oct 31 07:38:54 2020 PDT +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 90 Celsius +Critical Comp. Temp. Threshold: 95 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 9.78W - - 0 0 0 0 0 0 + 1 + 6.75W - - 1 1 1 1 0 0 + 2 + 5.23W - - 2 2 2 2 0 0 + 3 - 0.0490W - - 3 3 3 3 2000 2000 + 4 - 0.0018W - - 4 4 4 4 25000 25000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 - 512 0 2 + 1 + 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 32 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 0% +Data Units Read: 552,296 [282 GB] +Data Units Written: 8,898,536 [4.55 TB] +Host Read Commands: 17,740,636 +Host Write Commands: 33,976,001 +Controller Busy Time: 30 +Power Cycles: 16 +Power On Hours: 884 +Unsafe Shutdowns: 2 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 63 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 63 entries) +No Errors Logged + diff --git a/NVMe/Plextor/PX-256/PX-256M8PeG/B31EDA7FC3DC b/NVMe/Plextor/PX-256/PX-256M8PeG/B31EDA7FC3DC new file mode 100644 index 000000000..6fb4ac661 --- /dev/null +++ b/NVMe/Plextor/PX-256/PX-256M8PeG/B31EDA7FC3DC @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: PLEXTOR PX-256M8PeG +Serial Number: -- +Firmware Version: 1.01 +PCI Vendor ID: 0x14a4 +PCI Vendor Subsystem ID: 0x1b4b +IEEE OUI Identifier: 0x002303 +Total NVM Capacity: 256,060,514,304 [256 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Utilization: 0 +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002303 ... +Local Time is: Fri Sep 11 02:37:46 2020 PDT +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x001f): Security Format Frmw_DL NS_Mngmt Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 95 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.00W - - 0 0 0 0 0 0 + 1 + 4.00W - - 1 1 1 1 5 5 + 2 + 2.10W - - 2 2 2 2 5 5 + 3 - 0.1000W - - 3 3 3 3 5000 5000 + 4 - 0.0100W - - 4 4 4 4 50000 100000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 - 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 52 Celsius +Available Spare: 100% +Available Spare Threshold: 0% +Percentage Used: 0% +Data Units Read: 183,397 [93.8 GB] +Data Units Written: 1,012,854 [518 GB] +Host Read Commands: 5,639,734 +Host Write Commands: 43,388,562 +Controller Busy Time: 12,844 +Power Cycles: 39 +Power On Hours: 14,367 +Unsafe Shutdowns: 36 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 52 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/SK hynix/BC501/BC501 HFM256GDJTNG-8310A/97566FC3F327 b/NVMe/SK hynix/BC501/BC501 HFM256GDJTNG-8310A/97566FC3F327 new file mode 100644 index 000000000..a8c001873 --- /dev/null +++ b/NVMe/SK hynix/BC501/BC501 HFM256GDJTNG-8310A/97566FC3F327 @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SK hynix BC501 HFM256GDJTNG-8310A +Serial Number: -- +Firmware Version: 80000C00 +PCI Vendor/Subsystem ID: 0x1c5c +IEEE OUI Identifier: 0xace42e +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: ace42e ... +Local Time is: Thu Oct 22 23:07:55 2020 CDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x0016): Wr_Unc DS_Mngmt Sav/Sel_Feat +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 82 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 3.5000W - - 0 0 0 0 5 5 + 1 + 2.4000W - - 1 1 1 1 30 30 + 2 + 1.9000W - - 2 2 2 2 100 100 + 3 - 0.0350W - - 3 3 3 3 1000 1000 + 4 - 0.0050W - - 3 3 3 3 1000 5000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 34 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 22% +Data Units Read: 16,808,227 [8.60 TB] +Data Units Written: 18,700,505 [9.57 TB] +Host Read Commands: 237,478,736 +Host Write Commands: 375,939,364 +Controller Busy Time: 2,116 +Power Cycles: 1,051 +Power On Hours: 806 +Unsafe Shutdowns: 116 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 34 Celsius +Temperature Sensor 2: 35 Celsius + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/SK hynix/BC501/BC501 HFM256GDJTNG-8310A/D68143FA671F b/NVMe/SK hynix/BC501/BC501 HFM256GDJTNG-8310A/D68143FA671F new file mode 100644 index 000000000..320e97b65 --- /dev/null +++ b/NVMe/SK hynix/BC501/BC501 HFM256GDJTNG-8310A/D68143FA671F @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SK hynix BC501 HFM256GDJTNG-8310A +Serial Number: -- +Firmware Version: 80002C00 +PCI Vendor/Subsystem ID: 0x1c5c +IEEE OUI Identifier: 0xace42e +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: ace42e ... +Local Time is: Wed Aug 5 09:45:30 2020 MSK +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x0016): Wr_Unc DS_Mngmt Sav/Sel_Feat +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 82 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 3.5000W - - 0 0 0 0 5 5 + 1 + 2.4000W - - 1 1 1 1 30 30 + 2 + 1.9000W - - 2 2 2 2 100 100 + 3 - 0.0350W - - 3 3 3 3 1000 1000 + 4 - 0.0050W - - 3 3 3 3 1000 5000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 43 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 0% +Data Units Read: 622,825 [318 GB] +Data Units Written: 1,915,361 [980 GB] +Host Read Commands: 19,648,572 +Host Write Commands: 49,335,097 +Controller Busy Time: 214 +Power Cycles: 1,170 +Power On Hours: 2,091 +Unsafe Shutdowns: 130 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 64 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 43 Celsius +Temperature Sensor 2: 45 Celsius + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/SK hynix/HFM256/HFM256GDJTNG-8310A/B7E910BF6EA5 b/NVMe/SK hynix/HFM256/HFM256GDJTNG-8310A/B7E910BF6EA5 new file mode 100644 index 000000000..da46044e3 --- /dev/null +++ b/NVMe/SK hynix/HFM256/HFM256GDJTNG-8310A/B7E910BF6EA5 @@ -0,0 +1,62 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: HFM256GDJTNG-8310A +Serial Number: -- +Firmware Version: 80002C00 +PCI Vendor/Subsystem ID: 0x1c5c +IEEE OUI Identifier: 0xace42e +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Thu Oct 8 16:26:57 2020 +07 +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x0016): Wr_Unc DS_Mngmt Sav/Sel_Feat +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 82 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 3.5000W - - 0 0 0 0 5 5 + 1 + 2.4000W - - 1 1 1 1 30 30 + 2 + 1.9000W - - 2 2 2 2 100 100 + 3 - 0.0350W - - 3 3 3 3 1000 1000 + 4 - 0.0035W - - 3 3 3 3 1000 5000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 41 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 123,715 [63.3 GB] +Data Units Written: 316,906 [162 GB] +Host Read Commands: 1,901,016 +Host Write Commands: 4,621,927 +Controller Busy Time: 23 +Power Cycles: 42 +Power On Hours: 25 +Unsafe Shutdowns: 6 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 41 Celsius +Temperature Sensor 2: 42 Celsius + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/SK hynix/PC401/PC401 NVMe 256GB/B33617E42C56 b/NVMe/SK hynix/PC401/PC401 NVMe 256GB/B33617E42C56 new file mode 100644 index 000000000..31a201994 --- /dev/null +++ b/NVMe/SK hynix/PC401/PC401 NVMe 256GB/B33617E42C56 @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: PC401 NVMe SK hynix 256GB +Serial Number: -- +Firmware Version: 80007E00 +PCI Vendor/Subsystem ID: 0x1c5c +IEEE OUI Identifier: 0xace42e +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Utilization: 232,133,296,128 [232 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: ace42e ... +Local Time is: Sun Nov 1 12:50:22 2020 PST +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 79 Celsius +Critical Comp. Temp. Threshold: 81 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.00W - - 0 0 0 0 5 5 + 1 + 3.80W - - 1 1 1 1 30 30 + 2 + 2.40W - - 2 2 2 2 100 100 + 3 - 0.0700W - - 3 3 3 3 1000 1000 + 4 - 0.0070W - - 3 3 3 3 1000 5000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 50 Celsius +Available Spare: 100% +Available Spare Threshold: 50% +Percentage Used: 0% +Data Units Read: 2,005,626 [1.02 TB] +Data Units Written: 3,606,886 [1.84 TB] +Host Read Commands: 35,025,297 +Host Write Commands: 36,234,386 +Controller Busy Time: 22,450 +Power Cycles: 214 +Power On Hours: 538 +Unsafe Shutdowns: 41 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 50 Celsius +Temperature Sensor 2: 66 Celsius + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/SK hynix/SKHynix_HFS512/SKHynix_HFS512GD9TNG-L5B0B/B16F71D07239 b/NVMe/SK hynix/SKHynix_HFS512/SKHynix_HFS512GD9TNG-L5B0B/B16F71D07239 new file mode 100644 index 000000000..4ab2aa9f5 --- /dev/null +++ b/NVMe/SK hynix/SKHynix_HFS512/SKHynix_HFS512GD9TNG-L5B0B/B16F71D07239 @@ -0,0 +1,62 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SKHynix_HFS512GD9TNG-L5B0B +Serial Number: -- +Firmware Version: 80750C10 +PCI Vendor/Subsystem ID: 0x1c5c +IEEE OUI Identifier: 0xace42e +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: ace42e ... +Local Time is: Mon Jul 27 08:35:41 2020 HDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 64 Pages +Warning Comp. Temp. Threshold: 86 Celsius +Critical Comp. Temp. Threshold: 87 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.3000W - - 0 0 0 0 5 5 + 1 + 2.4000W - - 1 1 1 1 30 30 + 2 + 1.9000W - - 2 2 2 2 100 100 + 3 - 0.0500W - - 3 3 3 3 1000 1000 + 4 - 0.0040W - - 3 3 3 3 1000 9000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 29 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 1,098,302 [562 GB] +Data Units Written: 154,529 [79.1 GB] +Host Read Commands: 3,178,245 +Host Write Commands: 1,044,230 +Controller Busy Time: 9 +Power Cycles: 45 +Power On Hours: 3 +Unsafe Shutdowns: 39 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 29 Celsius +Temperature Sensor 2: 31 Celsius + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/SPCC/M.2/M.2 PCIe SSD 1TB/222119F710A0 b/NVMe/SPCC/M.2/M.2 PCIe SSD 1TB/222119F710A0 new file mode 100644 index 000000000..68135aa85 --- /dev/null +++ b/NVMe/SPCC/M.2/M.2 PCIe SSD 1TB/222119F710A0 @@ -0,0 +1,66 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SPCC M.2 PCIe SSD +Serial Number: -- +Firmware Version: ECFM22.4 +PCI Vendor/Subsystem ID: 0x1987 +IEEE OUI Identifier: 0x6479a7 +Total NVM Capacity: 1,024,209,543,168 [1.02 TB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 6479a7 ... +Local Time is: Thu Sep 24 23:50:54 2020 CDT +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 75 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 11.52W - - 0 0 0 0 0 0 + 1 + 8.09W - - 1 1 1 1 0 0 + 2 + 6.37W - - 2 2 2 2 0 0 + 3 - 0.0490W - - 3 3 3 3 2000 2000 + 4 - 0.0018W - - 4 4 4 4 25000 25000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 34 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 1% +Data Units Read: 642,497 [328 GB] +Data Units Written: 11,465,208 [5.87 TB] +Host Read Commands: 27,051,264 +Host Write Commands: 117,922,947 +Controller Busy Time: 62 +Power Cycles: 2,814 +Power On Hours: 2,904 +Unsafe Shutdowns: 557 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 4,423 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Thermal Temp. 1 Transition Count: 4 +Thermal Temp. 2 Transition Count: 4 +Thermal Temp. 1 Total Time: 2410 +Thermal Temp. 2 Total Time: 80 + +Error Information (NVMe Log 0x01, max 63 entries) +No Errors Logged + diff --git a/NVMe/SPCC/M.2/M.2 PCIe SSD 1TB/72A92D62D1A5 b/NVMe/SPCC/M.2/M.2 PCIe SSD 1TB/72A92D62D1A5 new file mode 100644 index 000000000..8b0e43aa7 --- /dev/null +++ b/NVMe/SPCC/M.2/M.2 PCIe SSD 1TB/72A92D62D1A5 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SPCC M.2 PCIe SSD +Serial Number: -- +Firmware Version: ECFM22.5 +PCI Vendor/Subsystem ID: 0x1987 +IEEE OUI Identifier: 0x6479a7 +Total NVM Capacity: 1,024,209,543,168 [1.02 TB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 6479a7 ... +Local Time is: Wed Jul 15 11:43:06 2020 CEST +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 75 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.35W - - 0 0 0 0 0 0 + 1 + 6.51W - - 1 1 1 1 0 0 + 2 + 5.58W - - 2 2 2 2 0 0 + 3 - 0.0490W - - 3 3 3 3 2000 2000 + 4 - 0.0018W - - 4 4 4 4 25000 25000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 26 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 0% +Data Units Read: 4,669,171 [2.39 TB] +Data Units Written: 3,780,352 [1.93 TB] +Host Read Commands: 49,934,543 +Host Write Commands: 77,046,368 +Controller Busy Time: 242 +Power Cycles: 184 +Power On Hours: 1,370 +Unsafe Shutdowns: 79 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Thermal Temp. 1 Transition Count: 1 +Thermal Temp. 1 Total Time: 120 + +Error Information (NVMe Log 0x01, max 63 entries) +No Errors Logged + diff --git a/NVMe/SPCC/M.2/M.2 PCIe SSD 512GB/078491B25E92 b/NVMe/SPCC/M.2/M.2 PCIe SSD 512GB/078491B25E92 new file mode 100644 index 000000000..32cf8424e --- /dev/null +++ b/NVMe/SPCC/M.2/M.2 PCIe SSD 512GB/078491B25E92 @@ -0,0 +1,68 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SPCC M.2 PCIe SSD +Serial Number: -- +Firmware Version: ECFM22.4 +PCI Vendor/Subsystem ID: 0x1987 +IEEE OUI Identifier: 0x6479a7 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 6479a7 ... +Local Time is: Wed Oct 28 22:12:11 2020 JST +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 75 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.35W - - 0 0 0 0 0 0 + 1 + 6.51W - - 1 1 1 1 0 0 + 2 + 5.58W - - 2 2 2 2 0 0 + 3 - 0.0490W - - 3 3 3 3 2000 2000 + 4 - 0.0018W - - 4 4 4 4 25000 25000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 39 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 55% +Data Units Read: 10,766,191 [5.51 TB] +Data Units Written: 187,884,517 [96.1 TB] +Host Read Commands: 160,803,883 +Host Write Commands: 3,664,436,781 +Controller Busy Time: 15,802 +Power Cycles: 89 +Power On Hours: 7,128 +Unsafe Shutdowns: 60 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 82 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Thermal Temp. 1 Transition Count: 5 +Thermal Temp. 2 Transition Count: 2 +Thermal Temp. 1 Total Time: 3516 +Thermal Temp. 2 Total Time: 239 + +Error Information (NVMe Log 0x01, max 63 entries) +No Errors Logged + + + diff --git a/NVMe/SPCC/M.2/M.2 PCIe SSD 512GB/95983284E5E4 b/NVMe/SPCC/M.2/M.2 PCIe SSD 512GB/95983284E5E4 new file mode 100644 index 000000000..4ee71a34c --- /dev/null +++ b/NVMe/SPCC/M.2/M.2 PCIe SSD 512GB/95983284E5E4 @@ -0,0 +1,66 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SPCC M.2 PCIe SSD +Serial Number: -- +Firmware Version: ECFM22.4 +PCI Vendor/Subsystem ID: 0x1987 +IEEE OUI Identifier: 0x6479a7 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 6479a7 ... +Local Time is: Wed Oct 28 22:12:11 2020 JST +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 75 Celsius +Critical Comp. Temp. Threshold: 80 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.35W - - 0 0 0 0 0 0 + 1 + 6.51W - - 1 1 1 1 0 0 + 2 + 5.58W - - 2 2 2 2 0 0 + 3 - 0.0490W - - 3 3 3 3 2000 2000 + 4 - 0.0018W - - 4 4 4 4 25000 25000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 35 Celsius +Available Spare: 100% +Available Spare Threshold: 5% +Percentage Used: 55% +Data Units Read: 10,720,979 [5.48 TB] +Data Units Written: 187,884,398 [96.1 TB] +Host Read Commands: 164,192,608 +Host Write Commands: 3,596,703,933 +Controller Busy Time: 15,873 +Power Cycles: 85 +Power On Hours: 7,128 +Unsafe Shutdowns: 55 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 82 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Thermal Temp. 1 Transition Count: 8 +Thermal Temp. 2 Transition Count: 2 +Thermal Temp. 1 Total Time: 4633 +Thermal Temp. 2 Total Time: 103 + +Error Information (NVMe Log 0x01, max 63 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLB256/MZVLB256HBHQ-00000/DDE2039D4196 b/NVMe/Samsung/MZVLB256/MZVLB256HBHQ-00000/DDE2039D4196 new file mode 100644 index 000000000..b20475c05 --- /dev/null +++ b/NVMe/Samsung/MZVLB256/MZVLB256HBHQ-00000/DDE2039D4196 @@ -0,0 +1,64 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLB256HBHQ-00000 +Serial Number: -- +Firmware Version: EXH7201Q +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 256,060,514,304 [256 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Utilization: 29,091,852,288 [29.0 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sun Nov 1 04:49:22 2020 CST +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 84 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.00W - - 0 0 0 0 0 0 + 1 + 6.30W - - 1 1 1 1 0 0 + 2 + 3.50W - - 2 2 2 2 0 0 + 3 - 0.0760W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 56 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 122,818 [62.8 GB] +Data Units Written: 460,655 [235 GB] +Host Read Commands: 3,478,185 +Host Write Commands: 14,185,600 +Controller Busy Time: 48 +Power Cycles: 24 +Power On Hours: 5,752 +Unsafe Shutdowns: 8 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 56 Celsius +Temperature Sensor 2: 59 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLB256/MZVLB256HBHQ-000L7/AEA8555AAEF0 b/NVMe/Samsung/MZVLB256/MZVLB256HBHQ-000L7/AEA8555AAEF0 new file mode 100644 index 000000000..45b3da059 --- /dev/null +++ b/NVMe/Samsung/MZVLB256/MZVLB256HBHQ-000L7/AEA8555AAEF0 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLB256HBHQ-000L7 +Serial Number: -- +Firmware Version: 4M2QEXH7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 256,060,514,304 [256 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Utilization: 145,887,260,672 [145 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sun Oct 25 12:35:37 2020 PDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 84 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.00W - - 0 0 0 0 0 0 + 1 + 6.30W - - 1 1 1 1 0 0 + 2 + 3.50W - - 2 2 2 2 0 0 + 3 - 0.0760W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 40 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 2,394,663 [1.22 TB] +Data Units Written: 3,961,550 [2.02 TB] +Host Read Commands: 43,238,449 +Host Write Commands: 61,241,630 +Controller Busy Time: 214 +Power Cycles: 224 +Power On Hours: 415 +Unsafe Shutdowns: 48 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 486 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 40 Celsius +Temperature Sensor 2: 41 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-00000/34BD777FE976 b/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-00000/34BD777FE976 new file mode 100644 index 000000000..06b0e9b9f --- /dev/null +++ b/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-00000/34BD777FE976 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLB512HAJQ-00000 +Serial Number: -- +Firmware Version: EXA7201Q +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 18,277,879,808 [18.2 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Mon Jul 20 16:26:30 2020 CEST +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 82 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.02W - - 0 0 0 0 0 0 + 1 + 6.30W - - 1 1 1 1 0 0 + 2 + 3.50W - - 2 2 2 2 0 0 + 3 - 0.0760W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 44 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 14,409,950 [7.37 TB] +Data Units Written: 8,571,674 [4.38 TB] +Host Read Commands: 283,788,141 +Host Write Commands: 131,233,827 +Controller Busy Time: 683 +Power Cycles: 1,233 +Power On Hours: 434 +Unsafe Shutdowns: 52 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 2,597 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 44 Celsius +Temperature Sensor 2: 57 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/119CD72C31F2 b/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/119CD72C31F2 new file mode 100644 index 000000000..37fa37a94 --- /dev/null +++ b/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/119CD72C31F2 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLB512HAJQ-000L7 +Serial Number: -- +Firmware Version: 3L2QEXA7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 321,615,134,720 [321 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Thu Oct 29 16:27:29 2020 CET +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 82 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.02W - - 0 0 0 0 0 0 + 1 + 6.30W - - 1 1 1 1 0 0 + 2 + 3.50W - - 2 2 2 2 0 0 + 3 - 0.0760W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 42 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 3% +Data Units Read: 25,301,880 [12.9 TB] +Data Units Written: 64,102,556 [32.8 TB] +Host Read Commands: 1,001,425,557 +Host Write Commands: 1,343,409,229 +Controller Busy Time: 8,871 +Power Cycles: 1,062 +Power On Hours: 10,806 +Unsafe Shutdowns: 224 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 1,140 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 42 Celsius +Temperature Sensor 2: 62 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/7B48EF5E0FC0 b/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/7B48EF5E0FC0 new file mode 100644 index 000000000..6359ad78b --- /dev/null +++ b/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/7B48EF5E0FC0 @@ -0,0 +1,64 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE-p13 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLB512HAJQ-000L7 +Serial Number: -- +Firmware Version: 5L2QEXA7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 228,095,352,832 [228 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Thu Aug 13 19:05:12 2020 MSK +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 82 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.02W - - 0 0 0 0 0 0 + 1 + 6.30W - - 1 1 1 1 0 0 + 2 + 3.50W - - 2 2 2 2 0 0 + 3 - 0.0760W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 50 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 2,986,601 [1.52 TB] +Data Units Written: 10,527,973 [5.39 TB] +Host Read Commands: 130,965,660 +Host Write Commands: 237,353,793 +Controller Busy Time: 2,067 +Power Cycles: 683 +Power On Hours: 2,839 +Unsafe Shutdowns: 660 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 3,548 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 50 Celsius +Temperature Sensor 2: 58 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/BFB138E8C58E b/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/BFB138E8C58E new file mode 100644 index 000000000..514540e26 --- /dev/null +++ b/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/BFB138E8C58E @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLB512HAJQ-000L7 +Serial Number: -- +Firmware Version: 5L2QEXA7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 412,625,051,648 [412 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Wed Sep 2 00:54:41 2020 CST +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 82 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.02W - - 0 0 0 0 0 0 + 1 + 6.30W - - 1 1 1 1 0 0 + 2 + 3.50W - - 2 2 2 2 0 0 + 3 - 0.0760W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 43 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 3% +Data Units Read: 22,585,704 [11.5 TB] +Data Units Written: 43,620,933 [22.3 TB] +Host Read Commands: 405,124,831 +Host Write Commands: 1,059,468,085 +Controller Busy Time: 5,354 +Power Cycles: 2,199 +Power On Hours: 7,252 +Unsafe Shutdowns: 1,066 +Media and Data Integrity Errors: 4 +Error Information Log Entries: 5,985 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 43 Celsius +Temperature Sensor 2: 64 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/DF49555F9E69 b/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/DF49555F9E69 new file mode 100644 index 000000000..98fb2e29e --- /dev/null +++ b/NVMe/Samsung/MZVLB512/MZVLB512HAJQ-000L7/DF49555F9E69 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLB512HAJQ-000L7 +Serial Number: -- +Firmware Version: 3L2QEXA7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 307,444,977,664 [307 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Fri Jul 31 14:26:54 2020 CEST +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 82 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.02W - - 0 0 0 0 0 0 + 1 + 6.30W - - 1 1 1 1 0 0 + 2 + 3.50W - - 2 2 2 2 0 0 + 3 - 0.0760W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 44 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 1% +Data Units Read: 7,160,524 [3.66 TB] +Data Units Written: 17,733,488 [9.07 TB] +Host Read Commands: 174,693,511 +Host Write Commands: 264,113,084 +Controller Busy Time: 1,293 +Power Cycles: 1,924 +Power On Hours: 3,304 +Unsafe Shutdowns: 1,046 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 849 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 44 Celsius +Temperature Sensor 2: 57 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLB512/MZVLB512HBJQ-000L7/472D1457DF58 b/NVMe/Samsung/MZVLB512/MZVLB512HBJQ-000L7/472D1457DF58 new file mode 100644 index 000000000..35840e2eb --- /dev/null +++ b/NVMe/Samsung/MZVLB512/MZVLB512HBJQ-000L7/472D1457DF58 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLB512HBJQ-000L7 +Serial Number: -- +Firmware Version: 4M2QEXF7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 414,866,968,576 [414 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Tue Sep 1 11:46:36 2020 PDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 84 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.00W - - 0 0 0 0 0 0 + 1 + 6.30W - - 1 1 1 1 0 0 + 2 + 3.50W - - 2 2 2 2 0 0 + 3 - 0.0760W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 42 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 6,107,173 [3.12 TB] +Data Units Written: 6,911,768 [3.53 TB] +Host Read Commands: 38,257,689 +Host Write Commands: 90,805,083 +Controller Busy Time: 306 +Power Cycles: 365 +Power On Hours: 854 +Unsafe Shutdowns: 71 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 175 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 42 Celsius +Temperature Sensor 2: 41 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLQ256/MZVLQ256HAJD-00000/0DEE00114F04 b/NVMe/Samsung/MZVLQ256/MZVLQ256HAJD-00000/0DEE00114F04 new file mode 100644 index 000000000..def554042 --- /dev/null +++ b/NVMe/Samsung/MZVLQ256/MZVLQ256HAJD-00000/0DEE00114F04 @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-BETA2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLQ256HAJD-00000 +Serial Number: -- +Firmware Version: FXV7000Q +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 256,060,514,304 [256 GB] +Unallocated NVM Capacity: 0 +Controller ID: 5 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Utilization: 64,765,579,264 [64.7 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Wed Sep 23 14:11:14 2020 +05 +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 82 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 4.83W - - 0 0 0 0 0 0 + 1 + 3.54W - - 1 1 1 1 0 0 + 2 + 3.04W - - 2 2 2 2 0 500 + 3 - 0.0500W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 1000 9000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 21 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 159,049 [81.4 GB] +Data Units Written: 917,399 [469 GB] +Host Read Commands: 2,881,710 +Host Write Commands: 16,612,912 +Controller Busy Time: 23 +Power Cycles: 41 +Power On Hours: 142 +Unsafe Shutdowns: 29 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 13 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 21 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/MZVLW256/MZVLW256HEHP-000L7/DC5575E5A3F5 b/NVMe/Samsung/MZVLW256/MZVLW256HEHP-000L7/DC5575E5A3F5 new file mode 100644 index 000000000..120323659 --- /dev/null +++ b/NVMe/Samsung/MZVLW256/MZVLW256HEHP-000L7/DC5575E5A3F5 @@ -0,0 +1,80 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLW256HEHP-000L7 +Serial Number: -- +Firmware Version: 5L7QCXB7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 256,060,514,304 [256 GB] +Unallocated NVM Capacity: 0 +Controller ID: 2 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Utilization: 197,259,403,264 [197 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sun Jul 5 16:25:39 2020 JST +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Warning Comp. Temp. Threshold: 69 Celsius +Critical Comp. Temp. Threshold: 72 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.60W - - 0 0 0 0 0 0 + 1 + 6.00W - - 1 1 1 1 0 0 + 2 + 5.10W - - 2 2 2 2 0 0 + 3 - 0.0400W - - 3 3 3 3 210 1500 + 4 - 0.0050W - - 4 4 4 4 2200 6000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 37 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 3% +Data Units Read: 49,426,594 [25.3 TB] +Data Units Written: 49,116,741 [25.1 TB] +Host Read Commands: 888,180,159 +Host Write Commands: 905,174,529 +Controller Busy Time: 5,124 +Power Cycles: 475 +Power On Hours: 15,297 +Unsafe Shutdowns: 306 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 3,251 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 37 Celsius +Temperature Sensor 2: 43 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 3251 0 0x0008 0x4004 - 0 0 - + 1 3250 0 0x0026 0x4202 0x028 0 0 - + 2 3249 0 0x0025 0x4202 0x028 0 0 - + 3 3248 0 0x001c 0x4004 0x02c 0 0 - + 4 3247 0 0x001b 0x4004 0x02c 0 0 - + 5 3246 0 0x001a 0x4202 0x028 0 0 - + 6 3245 0 0x0016 0x4212 0x028 0 - - + 7 3244 0 0x0002 0x4004 0x028 0 0 - + 8 3243 0 0x0008 0x4004 - 0 0 - + 9 3242 0 0x0026 0x4202 0x028 0 0 - + 10 3241 0 0x0025 0x4202 0x028 0 0 - + 11 3240 0 0x001c 0x4004 0x02c 0 0 - + 12 3239 0 0x001b 0x4004 0x02c 0 0 - + 13 3238 0 0x001a 0x4202 0x028 0 0 - + 14 3237 0 0x0016 0x4212 0x028 0 - - + 15 3236 0 0x0002 0x4004 0x028 0 0 - +... (48 entries not shown) + diff --git a/NVMe/Samsung/MZVLW512/MZVLW512HMJP-00000/B0710EFBD2C9 b/NVMe/Samsung/MZVLW512/MZVLW512HMJP-00000/B0710EFBD2C9 new file mode 100644 index 000000000..f0b1049dc --- /dev/null +++ b/NVMe/Samsung/MZVLW512/MZVLW512HMJP-00000/B0710EFBD2C9 @@ -0,0 +1,80 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: SAMSUNG MZVLW512HMJP-00000 +Serial Number: -- +Firmware Version: CXY7501Q +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 2 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 207,027,605,504 [207 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sun Sep 13 05:32:34 2020 CEST +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Warning Comp. Temp. Threshold: 68 Celsius +Critical Comp. Temp. Threshold: 71 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.60W - - 0 0 0 0 0 0 + 1 + 6.00W - - 1 1 1 1 0 0 + 2 + 5.10W - - 2 2 2 2 0 0 + 3 - 0.0400W - - 3 3 3 3 210 1500 + 4 - 0.0050W - - 4 4 4 4 2200 6000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 37 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 1,437,488 [735 GB] +Data Units Written: 2,408,212 [1.23 TB] +Host Read Commands: 35,892,015 +Host Write Commands: 46,727,016 +Controller Busy Time: 113 +Power Cycles: 856 +Power On Hours: 142 +Unsafe Shutdowns: 269 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 148 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 37 Celsius +Temperature Sensor 2: 64 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 148 0 0x001d 0x4004 0x02c 0 0 - + 1 147 0 0x001c 0x4004 0x02c 0 0 - + 2 146 0 0x001d 0x4004 0x02c 0 0 - + 3 145 0 0x001c 0x4004 0x02c 0 0 - + 4 144 0 0x001d 0x4004 0x02c 0 0 - + 5 143 0 0x001c 0x4004 0x02c 0 0 - + 6 142 0 0x001d 0x4004 0x02c 0 0 - + 7 141 0 0x001c 0x4004 0x02c 0 0 - + 8 140 0 0x0018 0x4004 - 0 0 - + 9 139 0 0x001d 0x4004 0x02c 0 0 - + 10 138 0 0x001c 0x4004 0x02c 0 0 - + 11 137 0 0x0018 0x4004 - 0 0 - + 12 136 0 0x001d 0x4004 0x02c 0 0 - + 13 135 0 0x001c 0x4004 0x02c 0 0 - + 14 134 0 0x001e 0x4004 - 0 0 - + 15 133 0 0x001a 0x4004 - 0 0 - +... (48 entries not shown) + diff --git a/NVMe/Samsung/PM961/PM961 NVMe 512GB/44845DB274F9 b/NVMe/Samsung/PM961/PM961 NVMe 512GB/44845DB274F9 new file mode 100644 index 000000000..81da910dc --- /dev/null +++ b/NVMe/Samsung/PM961/PM961 NVMe 512GB/44845DB274F9 @@ -0,0 +1,80 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: PM961 NVMe SAMSUNG 512GB +Serial Number: -- +Firmware Version: CXY74D1Q +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 2 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 429,107,023,872 [429 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sat Jul 4 19:43:12 2020 EEST +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Warning Comp. Temp. Threshold: 68 Celsius +Critical Comp. Temp. Threshold: 71 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.60W - - 0 0 0 0 0 0 + 1 + 5.00W - - 1 1 1 1 0 0 + 2 + 3.60W - - 2 2 2 2 0 0 + 3 - 0.0400W - - 3 3 3 3 210 1500 + 4 - 0.0050W - - 4 4 4 4 2200 6000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 42 Celsius +Available Spare: 100% +Available Spare Threshold: 50% +Percentage Used: 2% +Data Units Read: 33,864,021 [17.3 TB] +Data Units Written: 37,459,559 [19.1 TB] +Host Read Commands: 561,827,159 +Host Write Commands: 1,261,251,634 +Controller Busy Time: 2,260 +Power Cycles: 1,341 +Power On Hours: 2,787 +Unsafe Shutdowns: 453 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 2,956 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 42 Celsius +Temperature Sensor 2: 55 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 2956 0 0x0006 0x4016 0x004 0 1 - + 1 2955 0 0x0054 0x4212 0x028 0 - - + 2 2954 0 0x0020 0x4004 0x02c 0 0 - + 3 2953 0 0x001f 0x4004 0x02c 0 0 - + 4 2952 0 0x0002 0x4004 0x028 0 0 - + 5 2951 0 0x0006 0x4016 0x004 0 1 - + 6 2950 0 0x0006 0x4016 0x004 0 1 - + 7 2949 0 0x007c 0x4212 0x028 0 - - + 8 2948 0 0x0020 0x4004 0x02c 0 0 - + 9 2947 0 0x001f 0x4004 0x02c 0 0 - + 10 2946 0 0x0002 0x4004 0x028 0 0 - + 11 2945 0 0x0006 0x4016 0x004 0 1 - + 12 2944 0 0x0006 0x4016 0x004 0 1 - + 13 2943 0 0x0088 0x4212 0x028 0 - - + 14 2942 0 0x0020 0x4004 0x02c 0 0 - + 15 2941 0 0x001f 0x4004 0x02c 0 0 - +... (48 entries not shown) + diff --git a/NVMe/Samsung/PM981/PM981 NVMe 256GB/72876E86CDBE b/NVMe/Samsung/PM981/PM981 NVMe 256GB/72876E86CDBE new file mode 100644 index 000000000..eea0d1b2f --- /dev/null +++ b/NVMe/Samsung/PM981/PM981 NVMe 256GB/72876E86CDBE @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT-363681 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: PM981 NVMe Samsung 256GB +Serial Number: -- +Firmware Version: EXD72D1Q +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 256,060,514,304 [256 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Utilization: 9,497,415,680 [9.49 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Fri Aug 7 12:56:33 2020 HDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 82 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.02W - - 0 0 0 0 0 0 + 1 + 5.10W - - 1 1 1 1 0 0 + 2 + 3.50W - - 2 2 2 2 0 0 + 3 - 0.0760W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 45 Celsius +Available Spare: 100% +Available Spare Threshold: 50% +Percentage Used: 0% +Data Units Read: 4,834,723 [2.47 TB] +Data Units Written: 2,878,444 [1.47 TB] +Host Read Commands: 87,587,767 +Host Write Commands: 45,165,029 +Controller Busy Time: 669 +Power Cycles: 815 +Power On Hours: 967 +Unsafe Shutdowns: 208 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 204 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 45 Celsius +Temperature Sensor 2: 50 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/SSD 950/SSD 950 PRO 512GB/92A52D3EFDDF b/NVMe/Samsung/SSD 950/SSD 950 PRO 512GB/92A52D3EFDDF new file mode 100644 index 000000000..8c0f10539 --- /dev/null +++ b/NVMe/Samsung/SSD 950/SSD 950 PRO 512GB/92A52D3EFDDF @@ -0,0 +1,73 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 950 PRO 512GB +Serial Number: -- +Firmware Version: 1B0QBXX7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 37,257,633,792 [37.2 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Tue Sep 1 22:19:53 2020 EDT +Firmware Updates (0x06): 3 Slots +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 32 Pages + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.50W - - 0 0 0 0 5 5 + 1 + 5.80W - - 1 1 1 1 30 30 + 2 + 3.60W - - 2 2 2 2 100 100 + 3 - 0.0700W - - 3 3 3 3 500 5000 + 4 - 0.0050W - - 4 4 4 4 2000 22000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 35 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 4% +Data Units Read: 31,841,121 [16.3 TB] +Data Units Written: 61,279,572 [31.3 TB] +Host Read Commands: 368,898,564 +Host Write Commands: 1,416,467,199 +Controller Busy Time: 9,393 +Power Cycles: 779 +Power On Hours: 30,347 +Unsafe Shutdowns: 357 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 1,843 + +Error Information (NVMe Log 0x01, max 64 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 1843 1 - 0x0000 0x000 0 0 - + 1 1842 1 0x0000 0x4016 0x000 0 0 - + 2 1841 1 0x0000 0x4016 0x000 0 0 - + 3 1840 1 0x0000 0x4016 0x000 0 0 - + 4 1839 1 - 0x0000 0x000 0 0 - + 5 1838 1 - 0x0000 0x000 0 0 - + 6 1837 1 - 0x0000 0x000 0 0 - + 7 1836 0 0x0019 0x4212 0x000 0 255 - + 8 1835 0 0x0019 0x4212 0x000 0 255 - + 9 1834 0 0x0019 0x4212 0x000 0 255 - + 10 1833 0 0x0019 0x4212 0x000 0 255 - + 11 1832 0 0x0045 0x4212 0x000 0 255 - + 12 1831 0 0x0021 0x4004 0x000 0 0 - + 13 1830 0 0x0020 0x4004 0x000 0 0 - + 14 1829 0 0x001c 0x4212 0x000 0 255 - + 15 1828 0 0x0002 0x4004 0x000 0 0 - +... (48 entries not shown) + diff --git a/NVMe/Samsung/SSD 950/SSD 950 PRO 512GB/CF59E2A4C84B b/NVMe/Samsung/SSD 950/SSD 950 PRO 512GB/CF59E2A4C84B new file mode 100644 index 000000000..5314db432 --- /dev/null +++ b/NVMe/Samsung/SSD 950/SSD 950 PRO 512GB/CF59E2A4C84B @@ -0,0 +1,73 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 950 PRO 512GB +Serial Number: -- +Firmware Version: 1B0QBXX7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 5,362,188,288 [5.36 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Mon Aug 10 12:20:04 2020 CEST +Firmware Updates (0x06): 3 Slots +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 32 Pages + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.50W - - 0 0 0 0 5 5 + 1 + 5.80W - - 1 1 1 1 30 30 + 2 + 3.60W - - 2 2 2 2 100 100 + 3 - 0.0700W - - 3 3 3 3 500 5000 + 4 - 0.0050W - - 4 4 4 4 2000 22000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 48 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 4% +Data Units Read: 191,919,535 [98.2 TB] +Data Units Written: 81,598,706 [41.7 TB] +Host Read Commands: 1,876,878,822 +Host Write Commands: 2,482,825,186 +Controller Busy Time: 29,718 +Power Cycles: 2,573 +Power On Hours: 22,381 +Unsafe Shutdowns: 1,203 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 24 + +Error Information (NVMe Log 0x01, max 64 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 24 0 0x0006 0x4004 0x000 0 0 - + 1 23 0 0x0006 0x4004 0x000 0 0 - + 2 22 0 0x0006 0x4004 0x000 0 0 - + 3 21 0 0x002c 0x4212 0x000 0 255 - + 4 20 0 0x0016 0x4004 0x000 0 0 - + 5 19 0 0x0015 0x4004 0x000 0 0 - + 6 18 0 0x0002 0x4004 0x000 0 0 - + 7 17 0 0x0016 0x4004 0x000 0 0 - + 8 16 0 0x0015 0x4004 0x000 0 0 - + 9 15 0 0x0002 0x4004 0x000 0 0 - + 10 14 0 0x0018 0x4004 0x000 0 0 - + 11 13 0 0x0017 0x4004 0x000 0 0 - + 12 12 0 0x0002 0x4004 0x000 0 0 - + 13 11 0 0x0078 0x4212 0x000 0 255 - + 14 10 0 0x0018 0x4004 0x000 0 0 - + 15 9 0 0x0017 0x4004 0x000 0 0 - +... (8 entries not shown) + diff --git a/NVMe/Samsung/SSD 960/SSD 960 EVO 250GB/A8FC59EFE86C b/NVMe/Samsung/SSD 960/SSD 960 EVO 250GB/A8FC59EFE86C new file mode 100644 index 000000000..6a07a7c4f --- /dev/null +++ b/NVMe/Samsung/SSD 960/SSD 960 EVO 250GB/A8FC59EFE86C @@ -0,0 +1,81 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 960 EVO 250GB +Serial Number: -- +Firmware Version: 3B7QCXE7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 250,059,350,016 [250 GB] +Unallocated NVM Capacity: 0 +Controller ID: 2 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] +Namespace 1 Utilization: 1,044,480 [1.04 MB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Wed Sep 23 21:11:19 2020 MSK +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 77 Celsius +Critical Comp. Temp. Threshold: 79 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.04W - - 0 0 0 0 0 0 + 1 + 5.09W - - 1 1 1 1 0 0 + 2 + 4.08W - - 2 2 2 2 0 0 + 3 - 0.0400W - - 3 3 3 3 210 1500 + 4 - 0.0050W - - 4 4 4 4 2200 6000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 33 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 4,103,898 [2.10 TB] +Data Units Written: 5,249,264 [2.68 TB] +Host Read Commands: 93,596,629 +Host Write Commands: 109,972,182 +Controller Busy Time: 228 +Power Cycles: 620 +Power On Hours: 2,156 +Unsafe Shutdowns: 90 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 221 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 33 Celsius +Temperature Sensor 2: 55 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 221 0 0x000f 0x421a 0x028 0 0 - + 1 220 0 0x0007 0x4004 - 0 0 - + 2 219 0 0x000f 0x421a 0x028 0 0 - + 3 218 0 0x0007 0x4004 - 0 0 - + 4 217 0 0x000f 0x421a 0x028 0 0 - + 5 216 0 0x0007 0x4004 - 0 0 - + 6 215 0 0x0007 0x4004 - 0 0 - + 7 214 0 0x000f 0x421a 0x028 0 0 - + 8 213 0 0x0007 0x4004 - 0 0 - + 9 212 0 0x0007 0x4004 - 0 0 - + 10 211 0 0x0007 0x4004 - 0 0 - + 11 210 0 0x000e 0x421a 0x028 0 0 - + 12 209 0 0x0007 0x4004 - 0 0 - + 13 208 0 0x0002 0x4004 0x028 0 0 - + 14 207 0 0x0002 0x4004 0x028 0 0 - + 15 206 0 0x0032 0x4212 0x028 0 - - +... (48 entries not shown) + diff --git a/NVMe/Samsung/SSD 960/SSD 960 EVO 250GB/C85B6A964080 b/NVMe/Samsung/SSD 960/SSD 960 EVO 250GB/C85B6A964080 new file mode 100644 index 000000000..02879d959 --- /dev/null +++ b/NVMe/Samsung/SSD 960/SSD 960 EVO 250GB/C85B6A964080 @@ -0,0 +1,81 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 960 EVO 250GB +Serial Number: -- +Firmware Version: 3B7QCXE7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 250,059,350,016 [250 GB] +Unallocated NVM Capacity: 0 +Controller ID: 2 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] +Namespace 1 Utilization: 36,554,158,080 [36.5 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sat Oct 31 14:34:11 2020 PDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 77 Celsius +Critical Comp. Temp. Threshold: 79 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.04W - - 0 0 0 0 0 0 + 1 + 5.09W - - 1 1 1 1 0 0 + 2 + 4.08W - - 2 2 2 2 0 0 + 3 - 0.0400W - - 3 3 3 3 210 1500 + 4 - 0.0050W - - 4 4 4 4 2200 6000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 28 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 3% +Data Units Read: 9,236,101 [4.72 TB] +Data Units Written: 44,438,741 [22.7 TB] +Host Read Commands: 223,563,059 +Host Write Commands: 1,564,910,333 +Controller Busy Time: 6,678 +Power Cycles: 265 +Power On Hours: 26,232 +Unsafe Shutdowns: 90 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 367 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 28 Celsius +Temperature Sensor 2: 41 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 367 0 0x00b3 0x4212 0x028 0 - - + 1 366 0 0x00dd 0x4212 0x028 0 - - + 2 365 0 0x001d 0x4004 0x02c 0 0 - + 3 364 0 0x001c 0x4004 0x02c 0 0 - + 4 363 0 0x001d 0x4004 0x02c 0 0 - + 5 362 0 0x001c 0x4004 0x02c 0 0 - + 6 361 0 0x001d 0x4004 0x02c 0 0 - + 7 360 0 0x001c 0x4004 0x02c 0 0 - + 8 359 0 0x001d 0x4004 0x02c 0 0 - + 9 358 0 0x001c 0x4004 0x02c 0 0 - + 10 357 0 0x001d 0x4004 0x02c 0 0 - + 11 356 0 0x001c 0x4004 0x02c 0 0 - + 12 355 0 0x001d 0x4004 0x02c 0 0 - + 13 354 0 0x001c 0x4004 0x02c 0 0 - + 14 353 0 0x001d 0x4004 0x02c 0 0 - + 15 352 0 0x001c 0x4004 0x02c 0 0 - +... (48 entries not shown) + diff --git a/NVMe/Samsung/SSD 960/SSD 960 EVO 500GB/7060974C9893 b/NVMe/Samsung/SSD 960/SSD 960 EVO 500GB/7060974C9893 new file mode 100644 index 000000000..d70e96046 --- /dev/null +++ b/NVMe/Samsung/SSD 960/SSD 960 EVO 500GB/7060974C9893 @@ -0,0 +1,81 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 960 EVO 500GB +Serial Number: -- +Firmware Version: 3B7QCXE7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 500,107,862,016 [500 GB] +Unallocated NVM Capacity: 0 +Controller ID: 2 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] +Namespace 1 Utilization: 160,905,699,328 [160 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Mon Jul 27 17:18:59 2020 EDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 83 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.04W - - 0 0 0 0 0 0 + 1 + 5.09W - - 1 1 1 1 0 0 + 2 + 4.08W - - 2 2 2 2 0 0 + 3 - 0.0400W - - 3 3 3 3 210 1500 + 4 - 0.0050W - - 4 4 4 4 2200 6000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 41 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 1% +Data Units Read: 15,218,028 [7.79 TB] +Data Units Written: 14,092,584 [7.21 TB] +Host Read Commands: 133,407,508 +Host Write Commands: 182,570,725 +Controller Busy Time: 693 +Power Cycles: 370 +Power On Hours: 6,340 +Unsafe Shutdowns: 81 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 267 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 41 Celsius +Temperature Sensor 2: 59 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 267 0 0x0019 0x4212 0x028 0 - - + 1 266 0 0x0019 0x4212 0x028 0 - - + 2 265 0 0x0019 0x4212 0x028 0 - - + 3 264 0 0x00eb 0x4212 0x028 0 - - + 4 263 0 0x001c 0x4212 0x028 0 - - + 5 262 0 0x0002 0x4004 0x028 0 0 - + 6 261 0 0x0019 0x4212 0x028 0 - - + 7 260 0 0x0019 0x4212 0x028 0 - - + 8 259 0 0x00d9 0x4212 0x028 0 - - + 9 258 0 0x001c 0x4212 0x028 0 - - + 10 257 0 0x0002 0x4004 0x028 0 0 - + 11 256 0 0x001c 0x4212 0x028 0 - - + 12 255 0 0x0002 0x4004 0x028 0 0 - + 13 254 0 0x001c 0x4212 0x028 0 - - + 14 253 0 0x0002 0x4004 0x028 0 0 - + 15 252 0 0x00be 0x4212 0x028 0 - - +... (48 entries not shown) + diff --git a/NVMe/Samsung/SSD 970/SSD 970 EVO 500GB/5487B2BA5B7D b/NVMe/Samsung/SSD 970/SSD 970 EVO 500GB/5487B2BA5B7D new file mode 100644 index 000000000..4449249ba --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 EVO 500GB/5487B2BA5B7D @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 EVO 500GB +Serial Number: -- +Firmware Version: 1B2QEXE7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 500,107,862,016 [500 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] +Namespace 1 Utilization: 172,430,573,568 [172 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sat Jul 18 15:12:22 2020 -03 +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.20W - - 0 0 0 0 0 0 + 1 + 4.30W - - 1 1 1 1 0 0 + 2 + 2.10W - - 2 2 2 2 0 0 + 3 - 0.0400W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 33 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 3,867,826 [1.98 TB] +Data Units Written: 5,905,553 [3.02 TB] +Host Read Commands: 49,212,098 +Host Write Commands: 112,670,652 +Controller Busy Time: 659 +Power Cycles: 419 +Power On Hours: 1,027 +Unsafe Shutdowns: 23 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 33 Celsius +Temperature Sensor 2: 48 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 1TB/16075A5AFEDD b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 1TB/16075A5AFEDD new file mode 100644 index 000000000..aeee65cd9 --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 1TB/16075A5AFEDD @@ -0,0 +1,66 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 EVO Plus 1TB +Serial Number: -- +Firmware Version: 2B2QEXM7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 1,000,204,886,016 [1.00 TB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] +Namespace 1 Utilization: 214,138,351,616 [214 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sun Nov 1 12:50:22 2020 PST +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.80W - - 0 0 0 0 0 0 + 1 + 6.00W - - 1 1 1 1 0 0 + 2 + 3.40W - - 2 2 2 2 0 0 + 3 - 0.0700W - - 3 3 3 3 210 1200 + 4 - 0.0100W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 52 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 399,783 [204 GB] +Data Units Written: 2,747,320 [1.40 TB] +Host Read Commands: 13,356,536 +Host Write Commands: 32,916,007 +Controller Busy Time: 112 +Power Cycles: 212 +Power On Hours: 328 +Unsafe Shutdowns: 61 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 881 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 52 Celsius +Temperature Sensor 2: 56 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + + + diff --git a/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/0A950756FCED b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/0A950756FCED new file mode 100644 index 000000000..b2925bb94 --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/0A950756FCED @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 EVO Plus 250GB +Serial Number: -- +Firmware Version: 2B2QEXM7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 250,059,350,016 [250 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] +Namespace 1 Utilization: 10,591,477,760 [10.5 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Tue Jun 30 10:52:53 2020 +07 +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.80W - - 0 0 0 0 0 0 + 1 + 6.00W - - 1 1 1 1 0 0 + 2 + 3.40W - - 2 2 2 2 0 0 + 3 - 0.0700W - - 3 3 3 3 210 1200 + 4 - 0.0100W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 38 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 500,425 [256 GB] +Data Units Written: 50,739 [25.9 GB] +Host Read Commands: 68,989,236 +Host Write Commands: 2,546,146 +Controller Busy Time: 61 +Power Cycles: 14 +Power On Hours: 4,050 +Unsafe Shutdowns: 7 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 10 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 38 Celsius +Temperature Sensor 2: 39 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/2C2089697122 b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/2C2089697122 new file mode 100644 index 000000000..3783ad754 --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/2C2089697122 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 EVO Plus 250GB +Serial Number: -- +Firmware Version: 2B2QEXM7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 250,059,350,016 [250 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] +Namespace 1 Utilization: 98,448,793,600 [98.4 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Tue Sep 8 14:53:48 2020 CDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.80W - - 0 0 0 0 0 0 + 1 + 6.00W - - 1 1 1 1 0 0 + 2 + 3.40W - - 2 2 2 2 0 0 + 3 - 0.0700W - - 3 3 3 3 210 1200 + 4 - 0.0100W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 49 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 48,622 [24.8 GB] +Data Units Written: 378,034 [193 GB] +Host Read Commands: 1,520,990 +Host Write Commands: 4,788,084 +Controller Busy Time: 2 +Power Cycles: 30 +Power On Hours: 1,145 +Unsafe Shutdowns: 16 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 10 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 49 Celsius +Temperature Sensor 2: 58 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/810CB3101241 b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/810CB3101241 new file mode 100644 index 000000000..b02d13b2b --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/810CB3101241 @@ -0,0 +1,66 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 EVO Plus 250GB +Serial Number: -- +Firmware Version: 2B2QEXM7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 250,059,350,016 [250 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] +Namespace 1 Utilization: 130,082,422,784 [130 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Tue Sep 8 14:53:48 2020 CDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.80W - - 0 0 0 0 0 0 + 1 + 6.00W - - 1 1 1 1 0 0 + 2 + 3.40W - - 2 2 2 2 0 0 + 3 - 0.0700W - - 3 3 3 3 210 1200 + 4 - 0.0100W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 47 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 714,557 [365 GB] +Data Units Written: 3,624,536 [1.85 TB] +Host Read Commands: 32,655,804 +Host Write Commands: 55,739,970 +Controller Busy Time: 461 +Power Cycles: 71 +Power On Hours: 1,965 +Unsafe Shutdowns: 25 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 91 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 47 Celsius +Temperature Sensor 2: 52 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + + + diff --git a/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/AAB333C4123C b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/AAB333C4123C new file mode 100644 index 000000000..ceedffe76 --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/AAB333C4123C @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 EVO Plus 250GB +Serial Number: -- +Firmware Version: 1B2QEXM7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 250,059,350,016 [250 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] +Namespace 1 Utilization: 123,434,233,856 [123 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Wed Aug 5 15:16:26 2020 MSK +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.80W - - 0 0 0 0 0 0 + 1 + 6.00W - - 1 1 1 1 0 0 + 2 + 3.40W - - 2 2 2 2 0 0 + 3 - 0.0700W - - 3 3 3 3 210 1200 + 4 - 0.0100W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 49 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 455,409 [233 GB] +Data Units Written: 2,823,396 [1.44 TB] +Host Read Commands: 31,139,755 +Host Write Commands: 32,893,714 +Controller Busy Time: 29 +Power Cycles: 193 +Power On Hours: 940 +Unsafe Shutdowns: 18 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 4 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 49 Celsius +Temperature Sensor 2: 51 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/B1EC5A1ACC12 b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/B1EC5A1ACC12 new file mode 100644 index 000000000..d8acc432a --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 250GB/B1EC5A1ACC12 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 EVO Plus 250GB +Serial Number: -- +Firmware Version: 2B2QEXM7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 250,059,350,016 [250 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] +Namespace 1 Utilization: 59,487,092,736 [59.4 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sat Aug 29 15:48:51 2020 NZST +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.80W - - 0 0 0 0 0 0 + 1 + 6.00W - - 1 1 1 1 0 0 + 2 + 3.40W - - 2 2 2 2 0 0 + 3 - 0.0700W - - 3 3 3 3 210 1200 + 4 - 0.0100W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 34 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 118,578 [60.7 GB] +Data Units Written: 392,377 [200 GB] +Host Read Commands: 1,603,898 +Host Write Commands: 8,512,485 +Controller Busy Time: 20 +Power Cycles: 168 +Power On Hours: 58 +Unsafe Shutdowns: 17 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 34 Celsius +Temperature Sensor 2: 39 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 500GB/62D53A8D2B01 b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 500GB/62D53A8D2B01 new file mode 100644 index 000000000..80785f36f --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 500GB/62D53A8D2B01 @@ -0,0 +1,66 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 EVO Plus 500GB +Serial Number: -- +Firmware Version: 1B2QEXM7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 500,107,862,016 [500 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] +Namespace 1 Utilization: 149,629,427,712 [149 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sun Sep 27 23:15:01 2020 EDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.80W - - 0 0 0 0 0 0 + 1 + 6.00W - - 1 1 1 1 0 0 + 2 + 3.40W - - 2 2 2 2 0 0 + 3 - 0.0700W - - 3 3 3 3 210 1200 + 4 - 0.0100W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 42 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 1,448,658 [741 GB] +Data Units Written: 18,527,853 [9.48 TB] +Host Read Commands: 19,950,922 +Host Write Commands: 126,888,752 +Controller Busy Time: 527 +Power Cycles: 453 +Power On Hours: 1,569 +Unsafe Shutdowns: 119 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 42 Celsius +Temperature Sensor 2: 47 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + + + diff --git a/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 500GB/B8B03010F561 b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 500GB/B8B03010F561 new file mode 100644 index 000000000..365dce626 --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 EVO Plus 500GB/B8B03010F561 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 EVO Plus 500GB +Serial Number: -- +Firmware Version: 1B2QEXM7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 500,107,862,016 [500 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] +Namespace 1 Utilization: 499,673,260,032 [499 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sun Aug 2 15:30:03 2020 PDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 85 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 7.80W - - 0 0 0 0 0 0 + 1 + 6.00W - - 1 1 1 1 0 0 + 2 + 3.40W - - 2 2 2 2 0 0 + 3 - 0.0700W - - 3 3 3 3 210 1200 + 4 - 0.0100W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 45 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 3,228,589 [1.65 TB] +Data Units Written: 9,215,224 [4.71 TB] +Host Read Commands: 45,073,114 +Host Write Commands: 115,717,338 +Controller Busy Time: 344 +Power Cycles: 214 +Power On Hours: 899 +Unsafe Shutdowns: 112 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 73 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 45 Celsius +Temperature Sensor 2: 55 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/SSD 970/SSD 970 PRO 1TB/4B5F8397940A b/NVMe/Samsung/SSD 970/SSD 970 PRO 1TB/4B5F8397940A new file mode 100644 index 000000000..3cd271ad7 --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 PRO 1TB/4B5F8397940A @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 PRO 1TB +Serial Number: -- +Firmware Version: 1B2QEXP7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 1,024,209,543,168 [1.02 TB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] +Namespace 1 Utilization: 88,413,933,568 [88.4 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sun Sep 27 23:15:01 2020 EDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0037): Security Format Frmw_DL Self_Test Directvs +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 81 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.20W - - 0 0 0 0 0 0 + 1 + 4.30W - - 1 1 1 1 0 0 + 2 + 2.10W - - 2 2 2 2 0 0 + 3 - 0.0400W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 50 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 1,462,396 [748 GB] +Data Units Written: 7,605,050 [3.89 TB] +Host Read Commands: 10,979,724 +Host Write Commands: 264,262,711 +Controller Busy Time: 504 +Power Cycles: 504 +Power On Hours: 1,909 +Unsafe Shutdowns: 144 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 50 Celsius +Temperature Sensor 2: 58 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Samsung/SSD 970/SSD 970 PRO 1TB/627FEE67D3D3 b/NVMe/Samsung/SSD 970/SSD 970 PRO 1TB/627FEE67D3D3 new file mode 100644 index 000000000..a2dfda4a0 --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 PRO 1TB/627FEE67D3D3 @@ -0,0 +1,66 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 PRO 1TB +Serial Number: -- +Firmware Version: 1B2QEXP7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 1,024,209,543,168 [1.02 TB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] +Namespace 1 Utilization: 82,437,324,800 [82.4 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Sun Sep 27 23:15:01 2020 EDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0037): Security Format Frmw_DL Self_Test Directvs +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 81 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.20W - - 0 0 0 0 0 0 + 1 + 4.30W - - 1 1 1 1 0 0 + 2 + 2.10W - - 2 2 2 2 0 0 + 3 - 0.0400W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 48 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 1,463,367 [749 GB] +Data Units Written: 7,162,147 [3.66 TB] +Host Read Commands: 10,887,175 +Host Write Commands: 251,931,390 +Controller Busy Time: 510 +Power Cycles: 504 +Power On Hours: 2,089 +Unsafe Shutdowns: 144 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 48 Celsius +Temperature Sensor 2: 56 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + + + diff --git a/NVMe/Samsung/SSD 970/SSD 970 PRO 512GB/C27F415DD01D b/NVMe/Samsung/SSD 970/SSD 970 PRO 512GB/C27F415DD01D new file mode 100644 index 000000000..51ecf3bb8 --- /dev/null +++ b/NVMe/Samsung/SSD 970/SSD 970 PRO 512GB/C27F415DD01D @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [MidnightBSD 1.2.7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: Samsung SSD 970 PRO 512GB +Serial Number: -- +Firmware Version: 1B2QEXP7 +PCI Vendor/Subsystem ID: 0x144d +IEEE OUI Identifier: 0x002538 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 4 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 340,528,070,656 [340 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 002538 ... +Local Time is: Thu Aug 27 17:13:26 2020 EDT +Firmware Updates (0x16): 3 Slots, no Reset required +Optional Admin Commands (0x0037): Security Format Frmw_DL Self_Test Directvs +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 81 Celsius +Critical Comp. Temp. Threshold: 81 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.20W - - 0 0 0 0 0 0 + 1 + 4.30W - - 1 1 1 1 0 0 + 2 + 2.10W - - 2 2 2 2 0 0 + 3 - 0.0400W - - 3 3 3 3 210 1200 + 4 - 0.0050W - - 4 4 4 4 2000 8000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 50 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 1% +Data Units Read: 12,444,751 [6.37 TB] +Data Units Written: 30,466,327 [15.5 TB] +Host Read Commands: 151,193,113 +Host Write Commands: 574,899,249 +Controller Busy Time: 2,313 +Power Cycles: 24 +Power On Hours: 11,201 +Unsafe Shutdowns: 22 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 50 Celsius +Temperature Sensor 2: 69 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Toshiba/KBG30/KBG30ZMT512G/12D22891F0CB b/NVMe/Toshiba/KBG30/KBG30ZMT512G/12D22891F0CB new file mode 100644 index 000000000..aea99af27 --- /dev/null +++ b/NVMe/Toshiba/KBG30/KBG30ZMT512G/12D22891F0CB @@ -0,0 +1,61 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: KBG30ZMT512G TOSHIBA +Serial Number: -- +Firmware Version: 0106ADLA +PCI Vendor/Subsystem ID: 0x1179 +IEEE OUI Identifier: 0x00080d +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 00080d ... +Local Time is: Sun Jul 19 17:36:29 2020 UTC +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x0017): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 82 Celsius +Critical Comp. Temp. Threshold: 85 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 3.30W - - 0 0 0 0 0 0 + 1 + 2.80W - - 1 1 1 1 0 0 + 2 + 2.30W - - 2 2 2 2 0 0 + 3 - 0.0500W - - 4 4 4 4 8000 32000 + 4 - 0.0050W - - 4 4 4 4 8000 40000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 - 4096 0 0 + 1 + 512 0 3 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 38 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 403,139 [206 GB] +Data Units Written: 1,004,350 [514 GB] +Host Read Commands: 4,941,103 +Host Write Commands: 10,658,951 +Controller Busy Time: 65 +Power Cycles: 231 +Power On Hours: 54 +Unsafe Shutdowns: 206 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 58 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 38 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/Toshiba/KXG50/KXG50ZNV512G/DAC01454E2AB b/NVMe/Toshiba/KXG50/KXG50ZNV512G/DAC01454E2AB new file mode 100644 index 000000000..dd7247686 --- /dev/null +++ b/NVMe/Toshiba/KXG50/KXG50ZNV512G/DAC01454E2AB @@ -0,0 +1,65 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: KXG50ZNV512G TOSHIBA +Serial Number: -- +Firmware Version: AAXA4103 +PCI Vendor/Subsystem ID: 0x1179 +IEEE OUI Identifier: 0x00080d +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 00080d ... +Local Time is: Thu Oct 29 09:34:20 2020 CET +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 78 Celsius +Critical Comp. Temp. Threshold: 82 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.00W - - 0 0 0 0 0 0 + 1 + 2.40W - - 1 1 1 1 0 0 + 2 + 1.90W - - 2 2 2 2 0 0 + 3 - 0.0500W - - 3 3 3 3 1500 1500 + 4 - 0.0050W - - 4 4 4 4 6000 14000 + 5 - 0.0030W - - 5 5 5 5 50000 80000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 42 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 11% +Data Units Read: 7,523,537 [3.85 TB] +Data Units Written: 23,509,032 [12.0 TB] +Host Read Commands: 135,408,556 +Host Write Commands: 662,058,259 +Controller Busy Time: 1,316 +Power Cycles: 1,820 +Power On Hours: 8,719 +Unsafe Shutdowns: 980 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 42 Celsius + +Error Information (NVMe Log 0x01, max 128 entries) +No Errors Logged + diff --git a/NVMe/Toshiba/KXG60/KXG60PNV2T04 NVMe KIOXIA 2048GB/EE4D4287C626 b/NVMe/Toshiba/KXG60/KXG60PNV2T04 NVMe KIOXIA 2048GB/EE4D4287C626 new file mode 100644 index 000000000..71a01921d --- /dev/null +++ b/NVMe/Toshiba/KXG60/KXG60PNV2T04 NVMe KIOXIA 2048GB/EE4D4287C626 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT-HBSD amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: KXG60PNV2T04 NVMe KIOXIA 2048GB +Serial Number: -- +Firmware Version: 10704103 +PCI Vendor/Subsystem ID: 0x1179 +IEEE OUI Identifier: 0x8ce38e +Total NVM Capacity: 2,048,408,248,320 [2.04 TB] +Unallocated NVM Capacity: 0 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 2,048,408,248,320 [2.04 TB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 8ce38e ... +Local Time is: Fri Jul 10 13:32:22 2020 EDT +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 78 Celsius +Critical Comp. Temp. Threshold: 82 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.00W - - 0 0 0 0 1 1 + 1 + 2.40W - - 1 1 1 1 1 1 + 2 + 1.90W - - 2 2 2 2 1 1 + 3 - 0.0500W - - 3 3 3 3 1500 1500 + 4 - 0.0030W - - 4 4 4 4 50000 90000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 40 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 2,201,350 [1.12 TB] +Data Units Written: 3,077,174 [1.57 TB] +Host Read Commands: 31,081,739 +Host Write Commands: 12,481,499 +Controller Busy Time: 31 +Power Cycles: 43 +Power On Hours: 12 +Unsafe Shutdowns: 14 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 40 Celsius + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/Toshiba/THNSF5256/THNSF5256GCJ7/1C100D40ACE4 b/NVMe/Toshiba/THNSF5256/THNSF5256GCJ7/1C100D40ACE4 new file mode 100644 index 000000000..feea6a4ab --- /dev/null +++ b/NVMe/Toshiba/THNSF5256/THNSF5256GCJ7/1C100D40ACE4 @@ -0,0 +1,79 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: THNSF5256GCJ7 TOSHIBA +Serial Number: -- +Firmware Version: 510657LA +PCI Vendor/Subsystem ID: 0x1179 +IEEE OUI Identifier: 0x0d0800 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 00080d ... +Local Time is: Tue Aug 4 12:42:38 2020 AEST +Firmware Updates (0x02): 1 Slot +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Warning Comp. Temp. Threshold: 78 Celsius +Critical Comp. Temp. Threshold: 82 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.00W - - 0 0 0 0 0 0 + 1 + 3.90W - - 1 1 1 1 0 0 + 2 + 2.00W - - 2 2 2 2 0 0 + 3 - 0.1200W - - 3 3 3 3 1000 1000 + 4 - 0.0120W - - 4 4 4 4 5000 10000 + 5 - 0.0060W - - 5 5 5 5 100000 50000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 31 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 17% +Data Units Read: 16,479,660 [8.43 TB] +Data Units Written: 46,241,198 [23.6 TB] +Host Read Commands: 255,978,222 +Host Write Commands: 693,850,764 +Controller Busy Time: 955 +Power Cycles: 2,080 +Power On Hours: 3,142 +Unsafe Shutdowns: 822 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 28 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 31 Celsius +Thermal Temp. 1 Total Time: 32450842 + +Error Information (NVMe Log 0x01, max 128 entries) +Num ErrCount SQId CmdId Status PELoc LBA NSID VS + 0 28 - - - - - - - + 1 27 - - - - - - - + 2 26 - - - - - - - + 3 25 - - - - - - - + 4 24 - - - - - - - + 5 23 - - - - - - - + 6 22 - - - - - - - + 7 21 - - - - - - - + 8 20 - - - - - - - + 9 19 - - - - - - - + 10 18 - - - - - - - + 11 17 - - - - - - - + 12 16 - - - - - - - + 13 15 - - - - - - - + 14 14 - - - - - - - + 15 13 - - - - - - - +... (12 entries not shown) + diff --git a/NVMe/Toshiba/THNSF5256/THNSF5256GPUK/6791C952ED44 b/NVMe/Toshiba/THNSF5256/THNSF5256GPUK/6791C952ED44 new file mode 100644 index 000000000..42efea90d --- /dev/null +++ b/NVMe/Toshiba/THNSF5256/THNSF5256GPUK/6791C952ED44 @@ -0,0 +1,61 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: THNSF5256GPUK TOSHIBA +Serial Number: -- +Firmware Version: 51025KLA +PCI Vendor/Subsystem ID: 0x1179 +IEEE OUI Identifier: 0x00080d +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 00080d ... +Local Time is: Fri Jul 31 08:44:39 2020 AEST +Firmware Updates (0x02): 1 Slot +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Warning Comp. Temp. Threshold: 78 Celsius +Critical Comp. Temp. Threshold: 82 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 8.00W - - 0 0 0 0 0 0 + 1 + 3.90W - - 1 1 1 1 0 0 + 2 + 2.00W - - 2 2 2 2 0 0 + 3 - 0.1200W - - 3 3 3 3 1000 1000 + 4 - 0.0120W - - 4 4 4 4 5000 10000 + 5 - 0.0060W - - 5 5 5 5 100000 50000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 33 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 8% +Data Units Read: 1,936,203 [991 GB] +Data Units Written: 6,875,532 [3.52 TB] +Host Read Commands: 22,045,631 +Host Write Commands: 56,721,668 +Controller Busy Time: 743 +Power Cycles: 2,284 +Power On Hours: 5,941 +Unsafe Shutdowns: 862 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 33 Celsius + +Error Information (NVMe Log 0x01, max 128 entries) +No Errors Logged + diff --git a/NVMe/Union Memory/RPFTJ128/RPFTJ128PDD2EWX/CFB305F61781 b/NVMe/Union Memory/RPFTJ128/RPFTJ128PDD2EWX/CFB305F61781 new file mode 100644 index 000000000..ece3b62ab --- /dev/null +++ b/NVMe/Union Memory/RPFTJ128/RPFTJ128PDD2EWX/CFB305F61781 @@ -0,0 +1,62 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: RPFTJ128PDD2EWX +Serial Number: -- +Firmware Version: 11.9 +PCI Vendor/Subsystem ID: 0x1cc4 +IEEE OUI Identifier: 0x000000 +Total NVM Capacity: 128,035,676,160 [128 GB] +Unallocated NVM Capacity: 0 +Controller ID: 0 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 128,035,676,160 [128 GB] +Namespace 1 Formatted LBA Size: 512 +Local Time is: Wed Oct 28 07:27:23 2020 +0330 +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0007): Security Format Frmw_DL +Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 512 Pages +Warning Comp. Temp. Threshold: 90 Celsius +Critical Comp. Temp. Threshold: 94 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 3.00W - - 0 0 0 0 0 0 + 1 + 2.00W - - 1 1 1 1 0 0 + 2 + 2.00W - - 2 2 2 2 0 0 + 3 - 0.1000W - - 3 3 3 3 1000 1000 + 4 - 0.0050W - - 4 4 4 4 1000 5000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 1 + 1 - 4096 0 0 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 35 Celsius +Available Spare: 100% +Available Spare Threshold: 50% +Percentage Used: 0% +Data Units Read: 572,133 [292 GB] +Data Units Written: 687,475 [351 GB] +Host Read Commands: 7,954,723 +Host Write Commands: 7,335,015 +Controller Busy Time: 6 +Power Cycles: 240 +Power On Hours: 34 +Unsafe Shutdowns: 87 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 2: 35 Celsius + +Error Information (NVMe Log 0x01, max 16 entries) +No Errors Logged + diff --git a/NVMe/Union Memory/UMIS LENSE4051/UMIS LENSE40512GMSP34MESTB3A/2362C71656A4 b/NVMe/Union Memory/UMIS LENSE4051/UMIS LENSE40512GMSP34MESTB3A/2362C71656A4 new file mode 100644 index 000000000..9985035f9 --- /dev/null +++ b/NVMe/Union Memory/UMIS LENSE4051/UMIS LENSE40512GMSP34MESTB3A/2362C71656A4 @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: UMIS LENSE40512GMSP34MESTB3A +Serial Number: -- +Firmware Version: 2.3.7182 +PCI Vendor/Subsystem ID: 0x1cc4 +IEEE OUI Identifier: 0x044a50 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 6058 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Utilization: 0 +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 504a04 ... +Local Time is: Sat Oct 31 06:54:12 2020 CET +Firmware Updates (0x12): 1 Slot, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x0016): Wr_Unc DS_Mngmt Sav/Sel_Feat +Maximum Data Transfer Size: 32 Pages +Warning Comp. Temp. Threshold: 80 Celsius +Critical Comp. Temp. Threshold: 84 Celsius + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.50W 6.50W - 0 0 0 0 0 0 + 1 + 4.60W 4.60W - 1 1 1 1 5 5 + 2 + 3.90W 3.90W - 2 2 2 2 5 5 + 3 - 1.50W 1.50W - 3 3 3 3 4000 4000 + 4 - 0.0050W 0.50W - 4 4 4 4 20000 30000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 39 Celsius +Available Spare: 100% +Available Spare Threshold: 3% +Percentage Used: 0% +Data Units Read: 432,858 [221 GB] +Data Units Written: 2,494,508 [1.27 TB] +Host Read Commands: 7,862,896 +Host Write Commands: 26,129,806 +Controller Busy Time: 260 +Power Cycles: 82 +Power On Hours: 167 +Unsafe Shutdowns: 14 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 129 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 +Temperature Sensor 1: 39 Celsius + +Error Information (NVMe Log 0x01, max 64 entries) +No Errors Logged + diff --git a/NVMe/WDC/PC SN730/PC SN730 SDBQNTY-1T00-1001/E1CE12D55333 b/NVMe/WDC/PC SN730/PC SN730 SDBQNTY-1T00-1001/E1CE12D55333 new file mode 100644 index 000000000..23b37a0e9 --- /dev/null +++ b/NVMe/WDC/PC SN730/PC SN730 SDBQNTY-1T00-1001/E1CE12D55333 @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: WDC PC SN730 SDBQNTY-1T00-1001 +Serial Number: -- +Firmware Version: 11130101 +PCI Vendor/Subsystem ID: 0x15b7 +IEEE OUI Identifier: 0x001b44 +Total NVM Capacity: 1,024,209,543,168 [1.02 TB] +Unallocated NVM Capacity: 0 +Controller ID: 8215 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 001b44 ... +Local Time is: Mon Nov 2 00:22:57 2020 JST +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 128 Pages +Warning Comp. Temp. Threshold: 84 Celsius +Critical Comp. Temp. Threshold: 88 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.00W - - 0 0 0 0 0 0 + 1 + 3.50W - - 1 1 1 1 0 0 + 2 + 3.00W - - 2 2 2 2 0 0 + 3 - 0.1000W - - 3 3 3 3 4000 10000 + 4 - 0.0025W - - 4 4 4 4 4000 40000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 43 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 5,790,825 [2.96 TB] +Data Units Written: 2,469,750 [1.26 TB] +Host Read Commands: 29,576,871 +Host Write Commands: 37,018,441 +Controller Busy Time: 68 +Power Cycles: 6,052 +Power On Hours: 769 +Unsafe Shutdowns: 99 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 1 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/WDC/PC SN730/PC SN730 SDBQNTY-512G-1001/10CED488822A b/NVMe/WDC/PC SN730/PC SN730 SDBQNTY-512G-1001/10CED488822A new file mode 100644 index 000000000..83067447e --- /dev/null +++ b/NVMe/WDC/PC SN730/PC SN730 SDBQNTY-512G-1001/10CED488822A @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: WDC PC SN730 SDBQNTY-512G-1001 +Serial Number: -- +Firmware Version: 11130101 +PCI Vendor/Subsystem ID: 0x15b7 +IEEE OUI Identifier: 0x001b44 +Total NVM Capacity: 512,110,190,592 [512 GB] +Unallocated NVM Capacity: 0 +Controller ID: 8215 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 001b44 ... +Local Time is: Mon Oct 19 21:14:14 2020 MSK +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp +Maximum Data Transfer Size: 128 Pages +Warning Comp. Temp. Threshold: 84 Celsius +Critical Comp. Temp. Threshold: 88 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 5.50W - - 0 0 0 0 0 0 + 1 + 3.50W - - 1 1 1 1 0 0 + 2 + 3.00W - - 2 2 2 2 0 0 + 3 - 0.0700W - - 3 3 3 3 4000 10000 + 4 - 0.0025W - - 4 4 4 4 4000 40000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 39 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 1,876,385 [960 GB] +Data Units Written: 2,226,960 [1.14 TB] +Host Read Commands: 19,647,774 +Host Write Commands: 54,882,191 +Controller Busy Time: 56 +Power Cycles: 176 +Power On Hours: 787 +Unsafe Shutdowns: 14 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 10 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/WDC/WDS100/WDS100T3X0C-00SJG0/7193D1AF750A b/NVMe/WDC/WDS100/WDS100T3X0C-00SJG0/7193D1AF750A new file mode 100644 index 000000000..14bbae663 --- /dev/null +++ b/NVMe/WDC/WDS100/WDS100T3X0C-00SJG0/7193D1AF750A @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: WDS100T3X0C-00SJG0 +Serial Number: -- +Firmware Version: 102000WD +PCI Vendor/Subsystem ID: 0x15b7 +IEEE OUI Identifier: 0x001b44 +Total NVM Capacity: 1,000,204,886,016 [1.00 TB] +Unallocated NVM Capacity: 0 +Controller ID: 8215 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 001b44 ... +Local Time is: Sat Jul 4 19:13:02 2020 JST +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 128 Pages +Warning Comp. Temp. Threshold: 80 Celsius +Critical Comp. Temp. Threshold: 85 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 6.00W - - 0 0 0 0 0 0 + 1 + 3.50W - - 1 1 1 1 0 0 + 2 + 3.00W - - 2 2 2 2 0 0 + 3 - 0.1000W - - 3 3 3 3 4000 10000 + 4 - 0.0025W - - 4 4 4 4 4000 45000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 43 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 8,001,097 [4.09 TB] +Data Units Written: 31,404,125 [16.0 TB] +Host Read Commands: 111,285,923 +Host Write Commands: 698,280,979 +Controller Busy Time: 1,369 +Power Cycles: 50 +Power On Hours: 10,960 +Unsafe Shutdowns: 18 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 1,466,918 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/NVMe/WDC/WDS500/WDS500G1B0C-00S6U0/630F19148D3C b/NVMe/WDC/WDS500/WDS500G1B0C-00S6U0/630F19148D3C new file mode 100644 index 000000000..3386c98e0 --- /dev/null +++ b/NVMe/WDC/WDS500/WDS500G1B0C-00S6U0/630F19148D3C @@ -0,0 +1,63 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Number: WDC WDS500G1B0C-00S6U0 +Serial Number: -- +Firmware Version: 201000WD +PCI Vendor/Subsystem ID: 0x15b7 +IEEE OUI Identifier: 0x001b44 +Total NVM Capacity: 500,107,862,016 [500 GB] +Unallocated NVM Capacity: 0 +Controller ID: 1 +Number of Namespaces: 1 +Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] +Namespace 1 Formatted LBA Size: 512 +Namespace 1 IEEE EUI-64: 001b44 ... +Local Time is: Wed Aug 19 16:26:47 2020 EEST +Firmware Updates (0x14): 2 Slots, no Reset required +Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test +Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat +Maximum Data Transfer Size: 128 Pages +Warning Comp. Temp. Threshold: 82 Celsius +Critical Comp. Temp. Threshold: 86 Celsius +Namespace 1 Features (0x02): NA_Fields + +Supported Power States +St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat + 0 + 2.60W - - 0 0 0 0 0 0 + 1 + 2.60W - - 1 1 1 1 0 0 + 2 + 1.70W - - 2 2 2 2 0 0 + 3 - 0.0250W - - 3 3 3 3 5000 9000 + 4 - 0.0025W - - 4 4 4 4 5000 44000 + +Supported LBA Sizes (NSID 0x1) +Id Fmt Data Metadt Rel_Perf + 0 + 512 0 2 + 1 - 4096 0 1 + +=== START OF SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +SMART/Health Information (NVMe Log 0x02) +Critical Warning: 0x00 +Temperature: 48 Celsius +Available Spare: 100% +Available Spare Threshold: 10% +Percentage Used: 0% +Data Units Read: 17,182,968 [8.79 TB] +Data Units Written: 12,344,851 [6.32 TB] +Host Read Commands: 111,481,950 +Host Write Commands: 64,382,270 +Controller Busy Time: 382 +Power Cycles: 964 +Power On Hours: 6,180 +Unsafe Shutdowns: 181 +Media and Data Integrity Errors: 0 +Error Information Log Entries: 0 +Warning Comp. Temperature Time: 0 +Critical Comp. Temperature Time: 0 + +Error Information (NVMe Log 0x01, max 256 entries) +No Errors Logged + diff --git a/SSD/ADATA/SP310/SP310 128GB/7B0DBA54C9BD b/SSD/ADATA/SP310/SP310 128GB/7B0DBA54C9BD new file mode 100644 index 000000000..acecd6887 --- /dev/null +++ b/SSD/ADATA/SP310/SP310 128GB/7B0DBA54C9BD @@ -0,0 +1,184 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: JMicron based SSDs +Device Model: ADATA SP310 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: 5.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 16:17:09 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Unknown_JMF_Attribute POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_JMF_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_JMF_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 35718 + 10 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 237 +167 Unknown_JMF_Attribute -O---K 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 405 +169 Unknown_JMF_Attribute PO--C- 100 100 010 - 393220 +170 Bad_Block_Count PO--C- 100 100 010 - 0 0 0 +173 Erase_Count -O--C- 124 124 000 - 1030 1886 1771 +175 Bad_Cluster_Table_Count PO--C- 100 100 010 - 0 +180 Unknown_JMF_Attribute PO--CK 100 100 020 - 546 +192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 130 +194 Temperature_Celsius -O---K 054 054 030 - 46 (Min/Max 43/50) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_JMF_Attribute PO--CK 041 041 005 - 59 +233 Unknown_JMF_Attribute -O--CK 100 100 000 - 466354263040 +234 Unknown_JMF_Attribute -O--CK 100 100 000 - 706508085696 +240 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 20205038599 +242 Total_LBAs_Read -O--CK 100 100 000 - 7412661283 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (296) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 237 --- Lifetime Power-On Resets +0x01 0x018 6 20204868663 --- Logical Sectors Written +0x01 0x020 6 835793719 --- Number of Write Commands +0x01 0x028 6 7412653707 --- Logical Sectors Read +0x01 0x030 6 320820598 --- Number of Read Commands +0x01 0x038 6 128584800000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 75 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 405 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 707 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/ADATA/SP310/SP310 32GB/A11EDF397DCD b/SSD/ADATA/SP310/SP310 32GB/A11EDF397DCD new file mode 100644 index 000000000..245bc02e5 --- /dev/null +++ b/SSD/ADATA/SP310/SP310 32GB/A11EDF397DCD @@ -0,0 +1,97 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: JMicron based SSDs +Device Model: ADATA SP310 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: 2.4 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Oct 21 22:15:11 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 + 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 + 3 Unknown_JMF_Attribute 0x0007 100 100 050 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0 + 7 Unknown_JMF_Attribute 0x000b 100 100 050 Pre-fail Always - 0 + 8 Unknown_JMF_Attribute 0x0005 100 100 050 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 46677 + 10 Unknown_JMF_Attribute 0x0013 100 100 050 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 57 +167 Unknown_JMF_Attribute 0x0022 100 100 000 Old_age Always - 0 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 72 +169 Unknown_JMF_Attribute 0x0013 100 100 010 Pre-fail Always - 0 +170 Bad_Block_Count 0x0013 100 100 010 Pre-fail Always - 0 0 0 +173 Erase_Count 0x0012 186 186 000 Old_age Always - 195 329 3 +175 Bad_Cluster_Table_Count 0x0013 100 100 010 Pre-fail Always - 0 +192 Unexpect_Power_Loss_Ct 0x0012 100 100 000 Old_age Always - 35 +194 Temperature_Celsius 0x0022 049 049 030 Old_age Always - 51 (Min/Max 46/55) +197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 +240 Unknown_JMF_Attribute 0x0013 100 100 050 Pre-fail Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/ADATA/SP600/SP600 64GB/1DF60D7BB059 b/SSD/ADATA/SP600/SP600 64GB/1DF60D7BB059 new file mode 100644 index 000000000..39e14e61c --- /dev/null +++ b/SSD/ADATA/SP600/SP600 64GB/1DF60D7BB059 @@ -0,0 +1,182 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: JMicron based SSDs +Device Model: ADATA SP600 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 5.9 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 9 18:35:46 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Unknown_JMF_Attribute POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_JMF_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_JMF_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2025 + 10 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 32 +167 Unknown_JMF_Attribute -O---K 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 81 +169 Unknown_JMF_Attribute PO--C- 100 100 010 - 786437 +170 Bad_Block_Count PO--C- 100 100 010 - 0 0 0 +173 Erase_Count -O--C- 180 180 000 - 449 500 464 +175 Bad_Cluster_Table_Count PO--C- 100 100 010 - 0 +180 Unknown_JMF_Attribute PO--CK 100 100 020 - 260 +192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 20 +194 Temperature_Celsius -O---K 065 065 030 - 35 (Min/Max 30/37) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_JMF_Attribute PO--CK 085 085 005 - 15 +233 Unknown_JMF_Attribute -O--CK 100 100 000 - 59273153024 +234 Unknown_JMF_Attribute -O--CK 100 100 000 - 88996427584 +240 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 1374673127 +242 Total_LBAs_Read -O--CK 100 100 000 - 751549528 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (219) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x018 6 1374602503 --- Logical Sectors Written +0x01 0x020 6 14402380 --- Number of Write Commands +0x01 0x028 6 751541528 --- Logical Sectors Read +0x01 0x030 6 4336769 --- Number of Read Commands +0x01 0x038 6 7290000000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 20 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 81 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 386 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SP900/SP900 128GB/A0FCFB4E8962 b/SSD/ADATA/SP900/SP900 128GB/A0FCFB4E8962 new file mode 100644 index 000000000..4cf6e9037 --- /dev/null +++ b/SSD/ADATA/SP900/SP900 128GB/A0FCFB4E8962 @@ -0,0 +1,202 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: ADATA SP900 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 5.6.0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 26 06:27:06 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 095 095 050 - 0/42498290 + 5 Retired_Block_Count PO--CK 094 094 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 058 058 000 - 37164h+22m+29.860s + 12 Power_Cycle_Count -O--CK 100 100 000 - 447 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 185 +177 Wear_Range_Delta ------ 000 000 000 - 97 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +194 Temperature_Celsius -O---K 047 054 000 - 47 (Min/Max 14/54) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/42498290 +196 Reallocated_Event_Count PO--CK 094 094 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/42498290 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/42498290 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 097 097 010 - 4294967296 +233 SandForce_Internal -O--CK 000 000 000 - 24960 +234 SandForce_Internal -O--CK 000 000 000 - 25777 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 25777 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 11962 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 16 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 36975 - +# 2 Extended offline Interrupted (host reset) 60% 36955 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 47 Celsius +Power Cycle Min/Max Temperature: 14/54 Celsius +Lifetime Min/Max Temperature: 14/54 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (336) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 447 --- Lifetime Power-On Resets +0x01 0x010 4 37164 --- Power-on Hours +0x01 0x018 6 54311776018 --- Logical Sectors Written +0x01 0x028 6 25339447934 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 47 --- Current Temperature +0x05 0x010 1 44 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 46 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 3909 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/ADATA/SU630/SU630 480GB/E1D62AE4C30E b/SSD/ADATA/SU630/SU630 480GB/E1D62AE4C30E new file mode 100644 index 000000000..d052d1bc0 --- /dev/null +++ b/SSD/ADATA/SU630/SU630 480GB/E1D62AE4C30E @@ -0,0 +1,175 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA SU630 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: N181017a +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 7 20:23:46 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 1171 + 12 Power_Cycle_Count -O--C- 100 100 000 - 993 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 098 098 010 - 12887785483 +173 Unknown_Attribute -O--C- 200 200 000 - 90201456683 +175 Program_Fail_Count_Chip PO--C- 099 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 099 099 020 - 2344 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 74 +194 Temperature_Celsius -O---K 048 048 030 - 52 (Min/Max 0/55) +231 Temperature_Celsius PO--CK 098 098 005 - 2 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 72171229952 +234 Unknown_Attribute -O--CK 100 100 000 - 39749646720 +241 Total_LBAs_Written -O--CK 100 100 000 - 16996316374 +242 Total_LBAs_Read -O--CK 100 100 000 - 16913487524 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 819 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 52 Celsius +Power Cycle Min/Max Temperature: ?/54 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (203) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 993 --- Lifetime Power-On Resets +0x01 0x010 4 1171 --- Power-on Hours +0x01 0x018 6 16996316374 --- Logical Sectors Written +0x01 0x020 6 306170077 --- Number of Write Commands +0x01 0x028 6 16913487524 --- Logical Sectors Read +0x01 0x030 6 244531379 --- Number of Read Commands +0x01 0x038 6 1082253185396 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU650/SU650 120GB/B0B54A408147 b/SSD/ADATA/SU650/SU650 120GB/B0B54A408147 new file mode 100644 index 000000000..a2a4c5729 --- /dev/null +++ b/SSD/ADATA/SU650/SU650 120GB/B0B54A408147 @@ -0,0 +1,156 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-BETA2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ADATA SU650 +Serial Number: -- +Firmware Version: S0212B0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 20 23:03:46 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 823 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1389 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 3 +164 Unknown_Attribute -O--CK 100 100 050 - 283126 +165 Unknown_Attribute -O--CK 100 100 050 - 1803 +166 Unknown_Attribute -O--CK 100 100 050 - 7 +167 Unknown_Attribute -O--CK 100 100 050 - 199 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 97 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 254 +194 Temperature_Celsius -O---K 100 100 050 - 38 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 140805 +242 Total_LBAs_Read ----CK 100 100 050 - 143882 +245 Unknown_Attribute -O--CK 100 100 050 - 162806 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 70% 185 - +# 2 Short offline Aborted by host 70% 185 - +# 3 Short offline Self-test routine in progress 70% 185 - +# 4 Short offline Aborted by host 90% 37 - +# 5 Short offline Aborted by host 90% 37 - +# 6 Short offline Self-test routine in progress 90% 37 - +# 7 Short offline Completed without error 00% 37 - +# 8 Short offline Self-test routine in progress 60% 37 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1389 --- Lifetime Power-On Resets +0x01 0x010 4 823 --- Power-on Hours +0x01 0x018 6 637917542 --- Logical Sectors Written +0x01 0x020 6 784794 --- Number of Write Commands +0x01 0x028 6 839538966 --- Logical Sectors Read +0x01 0x030 6 45060 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/ADATA/SU800/SU800 1TB/046FB264893F b/SSD/ADATA/SU800/SU800 1TB/046FB264893F new file mode 100644 index 000000000..a32d2790a --- /dev/null +++ b/SSD/ADATA/SU800/SU800 1TB/046FB264893F @@ -0,0 +1,221 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: Q0922FS +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 21 03:11:52 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown (0xe000) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 2014 + 12 Power_Cycle_Count ------ 100 100 000 - 266 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 44 +163 Initial_Bad_Block_Count ------ 100 100 000 - 28 +164 Total_Erase_Count ------ 100 100 000 - 11641 +165 Max_Erase_Count ------ 100 100 000 - 50 +166 Min_Erase_Count ------ 100 100 000 - 12 +167 Average_Erase_Count ------ 100 100 000 - 24 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 7309 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 216 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 49 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 174 +159 Unkn_SiliconMotion_Attr ------ 100 100 000 - 0 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1500 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 100 +177 Wear_Leveling_Count ------ 100 100 050 - 1 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 44 +194 Temperature_Celsius ------ 100 100 000 - 39 +195 Hardware_ECC_Recovered ------ 100 100 000 - 11832 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 7 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 232312 +242 Host_Reads_32MiB ------ 100 100 000 - 130602 +245 TLC_Writes_32MiB ------ 100 100 000 - 838152 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 128 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 1995 - +# 2 Offline Completed without error 00% 1995 - +# 3 Offline Completed without error 00% 1995 - +# 4 Offline Completed without error 00% 1995 - +# 5 Offline Completed without error 00% 1991 - +# 6 Offline Completed without error 00% 1991 - +# 7 Offline Completed without error 00% 1991 - +# 8 Offline Completed without error 00% 1991 - +# 9 Offline Completed without error 00% 1991 - +#10 Offline Completed without error 00% 1991 - +#11 Offline Completed without error 00% 1991 - +#12 Offline Completed without error 00% 1991 - +#13 Offline Completed without error 00% 1808 - +#14 Offline Completed without error 00% 1808 - +#15 Offline Completed without error 00% 1536 - +#16 Offline Completed without error 00% 185 - +#17 Offline Completed without error 00% 1721 - +#18 Offline Completed without error 00% 1721 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 7 0 65535 Read_scanning was completed without error +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 266 --- Lifetime Power-On Resets +0x01 0x010 4 2014 --- Power-on Hours +0x01 0x018 6 2339922530 --- Logical Sectors Written +0x01 0x020 6 231433278 --- Number of Write Commands +0x01 0x028 6 4264209601 --- Logical Sectors Read +0x01 0x030 6 124772461 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 51 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1797 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SU800/SU800 256GB/72A628ADEB20 b/SSD/ADATA/SU800/SU800 256GB/72A628ADEB20 new file mode 100644 index 000000000..4cb7ae02e --- /dev/null +++ b/SSD/ADATA/SU800/SU800 256GB/72A628ADEB20 @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: ADATA SU800 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: Q0824B +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jun 29 15:45:34 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 2061 + 12 Power_Cycle_Count ------ 100 100 000 - 1733 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 3585 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 315 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 159 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 239 +159 Unkn_SiliconMotion_Attr ------ 100 100 000 - 0 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 39 +163 Initial_Bad_Block_Count ------ 100 100 000 - 19 +164 Total_Erase_Count ------ 100 100 000 - 31278 +165 Max_Erase_Count ------ 100 100 000 - 83 +166 Min_Erase_Count ------ 100 100 000 - 18 +167 Average_Erase_Count ------ 100 100 000 - 67 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 100 +177 Wear_Leveling_Count ------ 100 100 050 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 99 +194 Temperature_Celsius ------ 100 100 000 - 50 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 121035 +242 Host_Reads_32MiB ------ 100 100 000 - 126648 +245 TLC_Writes_32MiB ------ 100 100 000 - 563004 +250 Read_Error_Retry_Rate ------ 100 100 000 - 0 +251 Unkn_SiliconMotion_Attr ------ 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 934 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 50 Celsius +Power Cycle Min/Max Temperature: 28/50 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (6) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1733 --- Lifetime Power-On Resets +0x01 0x010 4 2061 --- Power-on Hours +0x01 0x018 6 3637202507 --- Logical Sectors Written +0x01 0x020 6 116908585 --- Number of Write Commands +0x01 0x028 6 4005061419 --- Logical Sectors Read +0x01 0x030 6 153518685 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 100 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 50 --- Current Temperature +0x05 0x010 1 47 --- Average Short Term Temperature +0x05 0x018 1 46 --- Average Long Term Temperature +0x05 0x020 1 70 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 57 --- Highest Average Short Term Temperature +0x05 0x038 1 46 --- Lowest Average Short Term Temperature +0x05 0x040 1 57 --- Highest Average Long Term Temperature +0x05 0x048 1 46 --- Lowest Average Long Term Temperature +0x05 0x050 4 46 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8528 --- Number of Hardware Resets +0x06 0x010 4 1238 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/ADATA/SX930/SX930 240GB/6333D4BED332 b/SSD/ADATA/SX930/SX930 240GB/6333D4BED332 new file mode 100644 index 000000000..4af21f681 --- /dev/null +++ b/SSD/ADATA/SX930/SX930 240GB/6333D4BED332 @@ -0,0 +1,212 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: JMicron based SSDs +Device Model: ADATA SX930 +Serial Number: -- +LU WWN Device Id: 5 707c18 ... +Firmware Version: 6.3SE +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 26 06:24:53 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 32) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Unknown_JMF_Attribute POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_JMF_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_JMF_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 24026 + 10 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 354 +167 Unknown_JMF_Attribute -O---K 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 178 +169 Unknown_JMF_Attribute PO--C- 100 100 010 - 4259854 +170 Bad_Block_Count PO--C- 100 100 010 - 0 0 0 +173 Erase_Count -O--C- 179 179 000 - 2 313 134 +175 Bad_Cluster_Table_Count PO--C- 100 100 010 - 0 +180 Unknown_JMF_Attribute PO--CK 100 100 020 - 4031 +192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 100 +194 Temperature_Celsius -O---K 063 063 030 - 37 (Min/Max 27/43) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +231 Unknown_JMF_Attribute PO--CK 096 096 005 - 4 +233 Unknown_JMF_Attribute -O--CK 100 100 000 - 248917241856 +234 Unknown_JMF_Attribute -O--CK 100 100 000 - 393789280384 +240 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 41721392613 +242 Total_LBAs_Read -O--CK 100 100 000 - 38944229773 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] occurred at disk power-on lifetime: 13465 hours (561 days + 1 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 00 00 00 10 e0 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 21231 - +# 2 Extended offline Completed without error 00% 16197 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (274) + +SCT Error Recovery Control: + Read: 70 (7.0 seconds) + Write: 70 (7.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 354 --- Lifetime Power-On Resets +0x01 0x018 6 41721392613 --- Logical Sectors Written +0x01 0x020 6 916661993 --- Number of Write Commands +0x01 0x028 6 38944229773 --- Logical Sectors Read +0x01 0x030 6 463981575 --- Number of Read Commands +0x01 0x038 6 86493600000 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 12 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 178 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2078 Device-to-host register FISes sent due to a COMRESET +0x000f 2 1 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Apacer/32/32GB SATA Flash Drive/5A5821D64FCA b/SSD/Apacer/32/32GB SATA Flash Drive/5A5821D64FCA new file mode 100644 index 000000000..61fd1702d --- /dev/null +++ b/SSD/Apacer/32/32GB SATA Flash Drive/5A5821D64FCA @@ -0,0 +1,102 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-STABLE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: 32GB SATA Flash Drive +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SFDDA01D +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Oct 29 11:18:35 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + No General Purpose Logging support. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 16777215 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 42460 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 19 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +175 Program_Fail_Count_Chip PO---- 100 100 010 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 0 +194 Temperature_Celsius -O---K 040 100 000 - 40 (Min/Max 30/60) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +160 Unknown_Attribute ------ 100 100 010 - 10 +161 Unknown_Attribute ------ 100 100 010 - 4 +162 Unknown_Attribute ------ 100 100 005 - 252 +163 Unknown_Attribute ------ 100 100 001 - 1929 +164 Unknown_Attribute ------ 100 100 001 - 1860 +165 Unknown_Attribute ------ 100 100 001 - 1860 +241 Total_LBAs_Written ------ 100 100 000 - 14751554443 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory not supported + +SMART Log Directory Version 0 +Address Access R/W Size Description +0x00 SL R/O 1 Log Directory + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 0 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Apacer/AS350/AS350 128GB/11ED8ECC0E48 b/SSD/Apacer/AS350/AS350 128GB/11ED8ECC0E48 new file mode 100644 index 000000000..b3e184e99 --- /dev/null +++ b/SSD/Apacer/AS350/AS350 128GB/11ED8ECC0E48 @@ -0,0 +1,157 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Apacer AS350 128GB +Serial Number: -- +Firmware Version: AP613PE0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Sep 13 13:48:21 2020 HKT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 100 100 000 - 109 + 12 Power_Cycle_Count -O--CK 100 100 000 - 64 +163 Unknown_Attribute -O--CK 100 100 000 - 2 +164 Unknown_Attribute -O--CK 100 100 000 - 1 +166 Unknown_Attribute -O--CK 100 100 000 - 0 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 3 +194 Temperature_Celsius -O---K 067 067 058 - 33 (Min/Max 33/33) +231 Temperature_Celsius -O--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--CK 100 100 000 - 350934570 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 64 --- Lifetime Power-On Resets +0x01 0x010 4 109 --- Power-on Hours +0x01 0x018 6 350934570 --- Logical Sectors Written +0x01 0x028 6 137194606 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 891 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 44 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 45 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Apacer/AS350/AS350 256GB/0D4936C2F398 b/SSD/Apacer/AS350/AS350 256GB/0D4936C2F398 new file mode 100644 index 000000000..f8347b7b2 --- /dev/null +++ b/SSD/Apacer/AS350/AS350 256GB/0D4936C2F398 @@ -0,0 +1,87 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Apacer AS350 256GB +Serial Number: -- +Firmware Version: AP613PE0 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Mon Oct 19 07:21:36 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 726 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 +163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3 +164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1 +166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +167 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +168 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6 +194 Temperature_Celsius 0x0022 067 067 058 Old_age Always - 33 (Min/Max 33/33) +231 Temperature_Celsius 0x0012 100 100 000 Old_age Always - 99 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 281536987 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Apple/SSD SD0128/SSD SD0128F/D5AE5AFFFA59 b/SSD/Apple/SSD SD0128/SSD SD0128F/D5AE5AFFFA59 new file mode 100644 index 000000000..21508ebe7 --- /dev/null +++ b/SSD/Apple/SSD SD0128/SSD SD0128F/D5AE5AFFFA59 @@ -0,0 +1,64 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SD0128F +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: A222821 +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 3.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 10:06:32 2020 +03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 40 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 100 100 000 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x000f 100 100 000 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2188 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7036 +169 Unknown_Apple_Attrib 0x0022 100 100 010 Old_age Always - 1000901445344 +173 Wear_Leveling_Count 0x0022 193 193 100 Old_age Always - 163224158337 +174 Host_Reads_MiB 0x0030 100 100 000 Old_age Offline - 11158178 +175 Host_Writes_MiB 0x0030 100 100 000 Old_age Offline - 9200434 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 166 +194 Temperature_Celsius 0x0022 035 035 000 Old_age Always - 65 (Min/Max 25/86) +197 Current_Pending_Sector 0x0032 000 000 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +244 Unknown_Attribute 0x0002 000 000 000 Old_age Always - 0 + +SMART Error Log not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + + + diff --git a/SSD/Apple/SSD SM/SSD SM0128G/2704EDB33DE3 b/SSD/Apple/SSD SM/SSD SM0128G/2704EDB33DE3 new file mode 100644 index 000000000..91a11ae4d --- /dev/null +++ b/SSD/Apple/SSD SM/SSD SM0128G/2704EDB33DE3 @@ -0,0 +1,89 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0128G +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXZ33A0Q +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 17:25:13 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x001a 200 200 000 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 2947 + 12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4011 +169 Unknown_Apple_Attrib 0x0013 253 253 010 Pre-fail Always - 725887222240 +173 Wear_Leveling_Count 0x0032 197 197 100 Old_age Always - 98792046647 +174 Host_Reads_MiB 0x0022 099 099 000 Old_age Always - 4064171 +175 Host_Writes_MiB 0x0022 099 099 000 Old_age Always - 4742519 +192 Power-Off_Retract_Count 0x0012 099 099 000 Old_age Always - 102 +194 Temperature_Celsius 0x0022 050 027 000 Old_age Always - 50 (Min/Max 18/73) +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x001a 200 199 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Apple/SSD SM/SSD SM0128G/43F3B60D0F07 b/SSD/Apple/SSD SM/SSD SM0128G/43F3B60D0F07 new file mode 100644 index 000000000..ef609e015 --- /dev/null +++ b/SSD/Apple/SSD SM/SSD SM0128G/43F3B60D0F07 @@ -0,0 +1,127 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0128G +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXZ33A0Q +User Capacity: 121,332,826,112 bytes [121 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 4 07:22:02 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 1429 + 12 Power_Cycle_Count -O--CK 097 097 000 - 2730 +169 Unknown_Apple_Attrib PO--C- 253 253 010 - 867621143008 +173 Wear_Leveling_Count -O--CK 193 193 100 - 34373763133 +174 Host_Reads_MiB -O---K 099 099 000 - 8018730 +175 Host_Writes_MiB -O---K 099 099 000 - 2771710 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 64 +194 Temperature_Celsius -O---K 060 028 000 - 40 (Min/Max 20/72) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xaa GPL,SL VS 4 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 35 Device-to-host register FISes sent due to a COMRESET +0x8fff 14: Invalid entry + diff --git a/SSD/Apple/SSD SM/SSD SM0512G/A25925A03639 b/SSD/Apple/SSD SM/SSD SM0512G/A25925A03639 new file mode 100644 index 000000000..5aff8f1cc --- /dev/null +++ b/SSD/Apple/SSD SM/SSD SM0512G/A25925A03639 @@ -0,0 +1,127 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM0512G +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXZ13A0Q +User Capacity: 500,277,790,720 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 21 23:01:58 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 4091 + 12 Power_Cycle_Count -O--CK 087 087 000 - 13070 +169 Unknown_Apple_Attrib PO--C- 253 253 010 - 2933613660032 +173 Wear_Leveling_Count -O--CK 194 194 100 - 42963107907 +174 Host_Reads_MiB -O---K 099 099 000 - 23241814 +175 Host_Writes_MiB -O---K 099 099 000 - 25031291 +192 Power-Off_Retract_Count -O--C- 099 099 000 - 229 +194 Temperature_Celsius -O---K 067 022 000 - 33 (Min/Max 0/78) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xaa GPL,SL VS 13 Device vendor specific log +0xab GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x8fff 14: Invalid entry + diff --git a/SSD/Apple/SSD SM256/SSD SM256E/364C0A87EE92 b/SSD/Apple/SSD SM256/SSD SM256E/364C0A87EE92 new file mode 100644 index 000000000..619ac280c --- /dev/null +++ b/SSD/Apple/SSD SM256/SSD SM256E/364C0A87EE92 @@ -0,0 +1,284 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Apple SD/SM/TS...E/F/G SSDs +Device Model: APPLE SSD SM256E +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: CXM09A1Q +User Capacity: 251,000,193,024 bytes [251 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 23 04:17:00 2020 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 960) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 16) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-RC- 198 198 000 - 64 + 5 Reallocated_Sector_Ct PO--CK 098 098 000 - 122 + 9 Power_On_Hours -O--CK 096 096 000 - 19437 + 12 Power_Cycle_Count -O--CK 094 094 000 - 5921 +169 Unknown_Apple_Attrib PO--C- 253 253 010 - 2319710165248 +173 Wear_Leveling_Count -O--CK 184 184 100 - 1172558446982 +192 Power-Off_Retract_Count -O--C- 098 098 000 - 5652 +194 Temperature_Celsius -O---K 060 035 000 - 40 (Min/Max 14/70) +197 Current_Pending_Sector -O---K 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O-RC- 200 200 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 2 Comprehensive SMART error log +0x03 GPL,SL R/O 2 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +Device Error Count: 65535 (device log contains only the most recent 8 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 65535 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 80 00 08 00 00 00 00 00 00 00 00 8 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + +Error 65534 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 80 00 08 00 00 00 00 00 00 00 00 8 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + +Error 65533 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 80 00 08 00 00 00 00 00 00 00 00 8 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + +Error 65532 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 80 00 08 00 00 00 00 00 00 00 00 8 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + +Error 65531 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 80 00 08 00 00 00 00 00 00 00 00 8 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 0c 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + +Error 65530 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 80 00 08 00 00 00 00 00 00 00 00 8 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 0c 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 0c 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + +Error 65529 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 80 00 08 00 00 00 00 00 00 00 00 8 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 0c 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 0c 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 0c 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + +Error 65528 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 40 -- 80 00 08 00 00 00 00 00 00 00 00 8 sectors at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 0c 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 08 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 0c 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 0c 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + 25 00 00 00 0c 00 00 00 00 00 00 00 00 00:06:45.000 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 49152 R_ERR response for data FIS +0x0003 2 53248 R_ERR response for device-to-host data FIS +0x0004 2 57344 R_ERR response for host-to-device data FIS +0x0005 2 7952 R_ERR response for non-data FIS +0x0006 2 2562 R_ERR response for device-to-host non-data FIS +0x0007 2 4096 R_ERR response for host-to-device non-data FIS +0x0008 2 7952 Device-to-host non-data FIS retries +0x0009 2 7953 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4268 Device-to-host register FISes sent due to a COMRESET +0x000b 2 6145 CRC errors within host-to-device FIS +0x000d 2 7953 Non-CRC errors within host-to-device FIS +0x000f 2 8176 R_ERR response for host-to-device data FIS, CRC +0x0010 2 15 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 49153 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 12112 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/BR/BR 64GB/BC1C2A92A4F0 b/SSD/China/BR/BR 64GB/BC1C2A92A4F0 new file mode 100644 index 000000000..a0e781f67 --- /dev/null +++ b/SSD/China/BR/BR 64GB/BC1C2A92A4F0 @@ -0,0 +1,145 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: BR 64GB +Serial Number: -- +Firmware Version: R0427A0 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Jul 5 10:16:45 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 2549 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1261 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 10 +164 Unknown_Attribute -O--CK 100 100 050 - 66519 +165 Unknown_Attribute -O--CK 100 100 050 - 392 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 45 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 222 +194 Temperature_Celsius -O---K 100 100 050 - 28 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 13484 +242 Total_LBAs_Read ----CK 100 100 050 - 13612 +245 Unknown_Attribute -O--CK 100 100 050 - 27188 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1261 --- Lifetime Power-On Resets +0x01 0x010 4 2549 --- Power-on Hours +0x01 0x018 6 883710788 --- Logical Sectors Written +0x01 0x020 6 18359 --- Number of Write Commands +0x01 0x028 6 892096640 --- Logical Sectors Read +0x01 0x030 6 14916 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/China/CS2246/CS2246-M512/EE92BB35CC8F b/SSD/China/CS2246/CS2246-M512/EE92BB35CC8F new file mode 100644 index 000000000..553a64659 --- /dev/null +++ b/SSD/China/CS2246/CS2246-M512/EE92BB35CC8F @@ -0,0 +1,161 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: CS2246-M512 +Serial Number: -- +Firmware Version: N1007C +User Capacity: 506,805,059,072 bytes [506 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 30 07:27:23 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 544 + 12 Power_Cycle_Count ------ 100 100 000 - 107 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 54 +163 Unknown_Attribute ------ 100 100 000 - 1 +164 Unknown_Attribute ------ 100 100 000 - 21398 +165 Unknown_Attribute ------ 100 100 000 - 54 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 21 +168 Unknown_Attribute ------ 100 100 000 - 3000 +169 Unknown_Attribute ------ 100 100 000 - 100 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 17 +194 Temperature_Celsius ------ 100 100 000 - 29 +195 Hardware_ECC_Recovered ------ 100 100 000 - 304 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Total_LBAs_Written ------ 100 100 000 - 204676 +242 Total_LBAs_Read ------ 100 100 000 - 134686 +245 Unknown_Attribute ------ 100 100 000 - 342368 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 45 - +# 2 Abort offline test Aborted by host 90% 45 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 107 --- Lifetime Power-On Resets +0x01 0x010 4 544 --- Power-on Hours +0x01 0x018 6 528757108 --- Logical Sectors Written +0x01 0x020 6 400729185 --- Number of Write Commands +0x01 0x028 6 236856578 --- Logical Sectors Read +0x01 0x030 6 434726004 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 17 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 301 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/China/MSATA/MSATA 64GB SSD/72B830673528 b/SSD/China/MSATA/MSATA 64GB SSD/72B830673528 new file mode 100644 index 000000000..9e0c67d2a --- /dev/null +++ b/SSD/China/MSATA/MSATA 64GB SSD/72B830673528 @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10-HBSD amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MSATA 64GB SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: Q0927A +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 8 20:44:22 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O---- 100 100 050 - 0 + 9 Power_On_Hours ------ 100 100 050 - 31 + 12 Power_Cycle_Count ------ 100 100 050 - 86 +160 Unknown_Attribute ------ 100 100 050 - 0 +161 Unknown_Attribute ------ 100 100 050 - 129 +162 Unknown_Attribute ------ 100 100 050 - 1 +163 Unknown_Attribute ------ 100 100 050 - 2 +164 Unknown_Attribute ------ 100 100 050 - 8872 +165 Unknown_Attribute ------ 100 100 050 - 8 +166 Unknown_Attribute ------ 100 100 050 - 1 +167 Unknown_Attribute ------ 100 100 050 - 4 +168 Unknown_Attribute ------ 100 100 050 - 3000 +169 Unknown_Attribute ------ 100 100 050 - 100 +192 Power-Off_Retract_Count ------ 100 100 050 - 66 +194 Temperature_Celsius ------ 100 100 050 - 40 +195 Hardware_ECC_Recovered ------ 100 100 050 - 0 +196 Reallocated_Event_Count ------ 100 100 050 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +241 Total_LBAs_Written ------ 100 100 050 - 7415 +242 Total_LBAs_Read ------ 100 100 050 - 660 +245 Unknown_Attribute ------ 100 100 050 - 8028 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x31 GPL - 4 Reserved +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 86 --- Lifetime Power-On Resets +0x01 0x010 4 31 --- Power-on Hours +0x01 0x018 6 485955780 --- Logical Sectors Written +0x01 0x020 6 7890776 --- Number of Write Commands +0x01 0x028 6 43300271 --- Logical Sectors Read +0x01 0x030 6 1686615 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 101 --- Average Short Term Temperature +0x05 0x018 1 -75 --- Average Long Term Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 40 --- Lowest Temperature +0x05 0x030 1 101 --- Highest Average Short Term Temperature +0x05 0x038 1 1 --- Lowest Average Short Term Temperature +0x05 0x040 1 -1 --- Highest Average Long Term Temperature +0x05 0x048 1 1 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 100 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 28752 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/OSSD256/OSSD256GBTSS2/941CABDA32A4 b/SSD/China/OSSD256/OSSD256GBTSS2/941CABDA32A4 new file mode 100644 index 000000000..5eb404e5a --- /dev/null +++ b/SSD/China/OSSD256/OSSD256GBTSS2/941CABDA32A4 @@ -0,0 +1,184 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: OSSD256GBTSS2 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: V0206 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 14 00:36:20 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2589 + 12 Power_Cycle_Count -O--C- 100 100 000 - 1053 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute -O--C- 100 100 000 - 318 +163 Unknown_Attribute PO---- 100 100 050 - 96 +164 Unknown_Attribute ------ 100 100 000 - 14448 +165 Unknown_Attribute ------ 100 100 000 - 3 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 1 +172 Unknown_Attribute -O--C- 100 100 000 - 0 +173 Unknown_Attribute -O---K 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 50 +194 Temperature_Celsius PO---K 070 070 000 - 30 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +198 Offline_Uncorrectable -O--C- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 9624 +242 Total_LBAs_Read -O--C- 100 100 000 - 16578 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2577 - +# 2 Extended offline Completed without error 00% 2564 - +# 3 Short offline Completed without error 00% 2540 - +# 4 Short offline Completed without error 00% 2536 - +# 5 Short offline Completed without error 00% 2514 - +# 6 Short offline Completed without error 00% 2498 - +# 7 Short offline Completed without error 00% 2484 - +# 8 Extended offline Completed without error 00% 2475 - +# 9 Short offline Completed without error 00% 2469 - +#10 Short offline Completed without error 00% 2459 - +#11 Short offline Completed without error 00% 2443 - +#12 Short offline Completed without error 00% 2433 - +#13 Short offline Completed without error 00% 2431 - +#14 Short offline Completed without error 00% 2412 - +#15 Short offline Completed without error 00% 2406 - +#16 Short offline Completed without error 00% 2398 - +#17 Extended offline Completed without error 00% 2391 - +#18 Short offline Completed without error 00% 2370 - +#19 Short offline Completed without error 00% 2354 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1053 --- Lifetime Power-On Resets +0x01 0x010 4 2589 --- Power-on Hours +0x01 0x018 6 630728063 --- Logical Sectors Written +0x01 0x028 6 1086510915 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x020 1 30 --- Highest Temperature +0x05 0x028 1 30 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/China/SATA SSD/SATA SSD 120GB/BD5F60DECB4D b/SSD/China/SATA SSD/SATA SSD 120GB/BD5F60DECB4D new file mode 100644 index 000000000..95d766933 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 120GB/BD5F60DECB4D @@ -0,0 +1,85 @@ +smartctl 7.0 2018-12-30 r4883 [NetBSD 9.1 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SAFM11.0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 22 00:43:50 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 22411 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 401 +168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 8 +170 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 58 +173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 3539025 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 76 +194 Temperature_Celsius 0x0023 070 070 030 Pre-fail Always - 30 (Min/Max 30/30) +218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 3 +231 Temperature_Celsius 0x0013 100 100 000 Pre-fail Always - 95 +241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 7795 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 22106 - +# 2 Extended offline Completed without error 00% 20955 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/China/SATA SSD/SATA SSD 256GB/99A5EC4BD523 b/SSD/China/SATA SSD/SATA SSD 256GB/99A5EC4BD523 new file mode 100644 index 000000000..fda938242 --- /dev/null +++ b/SSD/China/SATA SSD/SATA SSD 256GB/99A5EC4BD523 @@ -0,0 +1,154 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-STABLE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM61.3 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 15:04:35 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 505 + 12 Power_Cycle_Count -O--C- 100 100 000 - 20 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 000 - 188 +173 Unknown_Attribute -O--C- 100 100 000 - 1 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 12 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Temperature_Celsius PO--C- 100 100 000 - 100 +241 Total_LBAs_Written -O--C- 100 100 000 - 107 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 20 --- Lifetime Power-On Resets +0x01 0x010 4 505 --- Power-on Hours +0x01 0x018 6 224761883 --- Logical Sectors Written +0x01 0x028 6 73756925 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 65 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 26 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 27 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/China/SSD/SSD 128G/72A7DA338B7F b/SSD/China/SSD/SSD 128G/72A7DA338B7F new file mode 100644 index 000000000..fc22d589e --- /dev/null +++ b/SSD/China/SSD/SSD 128G/72A7DA338B7F @@ -0,0 +1,148 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD 128G +Serial Number: -- +Firmware Version: S0628A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 01:13:28 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 4346 + 12 Power_Cycle_Count -O--CK 100 100 050 - 14 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 8 +164 Unknown_Attribute -O--CK 100 100 050 - 7579 +165 Unknown_Attribute -O--CK 100 100 050 - 31 +166 Unknown_Attribute -O--CK 100 100 050 - 3 +167 Unknown_Attribute -O--CK 100 100 050 - 15 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 8 +194 Temperature_Celsius -O---K 100 100 050 - 30 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 4 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 16335 +242 Total_LBAs_Read ----CK 100 100 050 - 3280 +245 Unknown_Attribute -O--CK 100 100 050 - 10998 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 4346 --- Power-on Hours +0x01 0x018 6 1070577756 --- Logical Sectors Written +0x01 0x020 6 7907625 --- Number of Write Commands +0x01 0x028 6 214993939 --- Logical Sectors Read +0x01 0x030 6 768650 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/A06E3A95FED3 b/SSD/Crucial/CT1000/CT1000MX500SSD1/A06E3A95FED3 new file mode 100644 index 000000000..99c14d675 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/A06E3A95FED3 @@ -0,0 +1,104 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR032 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 29 20:00:46 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 + 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 298 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 Ave_Block-Erase_Count 0x0032 100 100 000 Old_age Always - 3 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 5 +180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 26 +183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 +184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 065 046 000 Old_age Always - 35 (Min/Max 0/54) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +202 Percent_Lifetime_Remain 0x0030 100 100 001 Old_age Offline - 0 +206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 +210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 +246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 1849196077 +247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 15889451 +248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 17134123 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/B6A01F602D5D b/SSD/Crucial/CT1000/CT1000MX500SSD1/B6A01F602D5D new file mode 100644 index 000000000..2c82243f2 --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/B6A01F602D5D @@ -0,0 +1,104 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR032 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 13:51:12 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 + 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 684 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 169 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 Ave_Block-Erase_Count 0x0032 100 100 000 Old_age Always - 1 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 14 +180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 31 +183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 +184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 059 053 000 Old_age Always - 41 (Min/Max 0/47) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +202 Percent_Lifetime_Remain 0x0030 100 100 001 Old_age Offline - 0 +206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 +210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 +246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 727946742 +247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 7635895 +248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 6705463 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Crucial/CT1000/CT1000MX500SSD1/F00315980158 b/SSD/Crucial/CT1000/CT1000MX500SSD1/F00315980158 new file mode 100644 index 000000000..3a2e2c6ff --- /dev/null +++ b/SSD/Crucial/CT1000/CT1000MX500SSD1/F00315980158 @@ -0,0 +1,105 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT1000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR020 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 06:52:07 2020 EDT + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 + 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5442 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 61 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 Ave_Block-Erase_Count 0x0032 092 092 000 Old_age Always - 131 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 13 +180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 46 +183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 +184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 057 037 000 Old_age Always - 43 (Min/Max 0/63) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Bogus_Current_Pend_Sect 0x0032 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +202 Percent_Lifetime_Remain 0x0030 092 092 001 Old_age Offline - 8 +206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 +210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 +246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 45638038867 +247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 751485136 +248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 2351869362 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Crucial/CT1050/CT1050MX300SSD1/90304623F990 b/SSD/Crucial/CT1050/CT1050MX300SSD1/90304623F990 new file mode 100644 index 000000000..882224665 --- /dev/null +++ b/SSD/Crucial/CT1050/CT1050MX300SSD1/90304623F990 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Crucial_CT1050MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR060 +User Capacity: 1,050,214,588,416 bytes [1.05 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 10 12:20:04 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2783) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 13) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9324 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1144 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 098 098 000 - 42 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 240 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 054 048 000 - 46 (Min/Max 6/52) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 098 098 001 - 2 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 37369457604 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1168736902 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 631549615 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 4415 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 8767 - +# 2 Vendor (0xff) Completed without error 00% 8714 - +# 3 Vendor (0xff) Completed without error 00% 8338 - +# 4 Vendor (0xff) Completed without error 00% 7213 - +# 5 Vendor (0xff) Completed without error 00% 7054 - +# 6 Vendor (0xff) Completed without error 00% 7027 - +# 7 Vendor (0xff) Completed without error 00% 6950 - +# 8 Vendor (0xff) Completed without error 00% 6880 - +# 9 Vendor (0xff) Completed without error 00% 6170 - +#10 Vendor (0xff) Completed without error 00% 6130 - +#11 Vendor (0xff) Completed without error 00% 6094 - +#12 Vendor (0xff) Completed without error 00% 6000 - +#13 Vendor (0xff) Completed without error 00% 5828 - +#14 Vendor (0xff) Completed without error 00% 5606 - +#15 Vendor (0xff) Completed without error 00% 5256 - +#16 Vendor (0xff) Completed without error 00% 5080 - +#17 Vendor (0xff) Completed without error 00% 4655 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 46 Celsius +Power Cycle Min/Max Temperature: 26/46 Celsius +Lifetime Min/Max Temperature: 6/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (285) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1144 --- Lifetime Power-On Resets +0x01 0x010 4 9324 --- Power-on Hours +0x01 0x018 6 37369457604 --- Logical Sectors Written +0x01 0x020 6 673377501 --- Number of Write Commands +0x01 0x028 6 64433170878 --- Logical Sectors Read +0x01 0x030 6 319324267 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1242 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 46 --- Current Temperature +0x05 0x010 1 41 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 6 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 29 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4683 --- Number of Hardware Resets +0x06 0x010 4 488 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT1050/CT1050MX300SSD1/BE7D100FE99F b/SSD/Crucial/CT1050/CT1050MX300SSD1/BE7D100FE99F new file mode 100644 index 000000000..2a95a1104 --- /dev/null +++ b/SSD/Crucial/CT1050/CT1050MX300SSD1/BE7D100FE99F @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 11/1300 SSDs +Device Model: Crucial_CT1050MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR070 +User Capacity: 1,050,214,588,416 bytes [1.05 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:13:58 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x04) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 390) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 29143 + 12 Power_Cycle_Count -O--CK 100 100 000 - 187 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 091 091 000 - 135 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 130 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 047 000 - 36 (Min/Max 14/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1844 +202 Percent_Lifetime_Remain ----CK 091 091 001 - 9 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 124598241004 +247 Host_Program_Page_Count -O--CK 100 100 000 - 3900710490 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1377600749 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 4428 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 29135 - +# 2 Vendor (0xff) Completed without error 00% 28796 - +# 3 Vendor (0xff) Completed without error 00% 28447 - +# 4 Vendor (0xff) Completed without error 00% 27918 - +# 5 Vendor (0xff) Completed without error 00% 27409 - +# 6 Vendor (0xff) Completed without error 00% 26857 - +# 7 Vendor (0xff) Completed without error 00% 26325 - +# 8 Vendor (0xff) Completed without error 00% 26097 - +# 9 Vendor (0xff) Completed without error 00% 25562 - +#10 Vendor (0xff) Completed without error 00% 25490 - +#11 Vendor (0xff) Completed without error 00% 25015 - +#12 Vendor (0xff) Completed without error 00% 24462 - +#13 Vendor (0xff) Completed without error 00% 23920 - +#14 Vendor (0xff) Completed without error 00% 23374 - +#15 Vendor (0xff) Completed without error 00% 23077 - +#16 Vendor (0xff) Completed without error 00% 22636 - +#17 Vendor (0xff) Completed without error 00% 9179 - +#18 Vendor (0xff) Completed without error 00% 9056 - +#19 Vendor (0xff) Completed without error 00% 8325 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 32/39 Celsius +Lifetime Min/Max Temperature: 14/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (203) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 187 --- Lifetime Power-On Resets +0x01 0x010 4 29143 --- Power-on Hours +0x01 0x018 6 124598241004 --- Logical Sectors Written +0x01 0x020 6 2269510355 --- Number of Write Commands +0x01 0x028 6 112078073831 --- Logical Sectors Read +0x01 0x030 6 968380872 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 889 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1937 --- Number of Hardware Resets +0x06 0x010 4 495 --- Number of ASR Events +0x06 0x018 4 1844 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT120/CT120BX500SSD1/458A2966BDCF b/SSD/Crucial/CT120/CT120BX500SSD1/458A2966BDCF new file mode 100644 index 000000000..640c5d39f --- /dev/null +++ b/SSD/Crucial/CT120/CT120BX500SSD1/458A2966BDCF @@ -0,0 +1,90 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: CT120BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Oct 21 18:34:44 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 + 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 1560 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 59 +171 Program_Fail_Count 0x0032 100 100 050 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 050 Old_age Always - 0 +173 Ave_Block-Erase_Count 0x0032 100 100 050 Old_age Always - 10 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 050 Old_age Always - 34 +180 Unused_Reserve_NAND_Blk 0x0032 100 100 050 Old_age Always - 100 +183 SATA_Interfac_Downshift 0x0032 100 100 050 Old_age Always - 0 +184 Error_Correction_Count 0x0032 100 100 050 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 050 Old_age Always - 0 +194 Temperature_Celsius 0x0022 064 051 050 Old_age Always - 36 (Min/Max 29/49) +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 050 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +202 Percent_Lifetime_Remain 0x0030 100 100 001 Old_age Offline - 100 +206 Write_Error_Rate 0x002e 100 100 050 Old_age Always - 0 +210 Success_RAIN_Recov_Cnt 0x0032 100 100 050 Old_age Always - 0 +246 Total_LBAs_Written 0x0032 100 100 050 Old_age Always - 927097327 +247 Host_Program_Page_Count 0x0032 100 100 050 Old_age Always - 28971791 +248 FTL_Program_Page_Count 0x0032 100 100 050 Old_age Always - 940032 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + + + diff --git a/SSD/Crucial/CT120/CT120M500SSD1/32E32E9A3AE9 b/SSD/Crucial/CT120/CT120M500SSD1/32E32E9A3AE9 new file mode 100644 index 000000000..eaff53c93 --- /dev/null +++ b/SSD/Crucial/CT120/CT120M500SSD1/32E32E9A3AE9 @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 11/1300 SSDs +Device Model: Crucial_CT120M500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU05 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:50:55 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 555) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 2 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 15465 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1441 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 018 018 000 - 2463 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 89 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1990 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 058 000 - 40 (Min/Max -11/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain P---CK 018 018 000 - 82 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 --- - 23621294242 +247 Host_Program_Page_Count -O--CK 100 100 --- - 838588470 +248 FTL_Program_Page_Count -O--CK 100 100 --- - 1272575290 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 14010 - +# 2 Vendor (0xff) Completed without error 00% 14009 - +# 3 Short offline Completed without error 00% 14006 - +# 4 Short offline Completed without error 00% 14006 - +# 5 Vendor (0xff) Completed without error 00% 13994 - +# 6 Vendor (0xff) Completed without error 00% 13981 - +# 7 Vendor (0xff) Completed without error 00% 13969 - +# 8 Vendor (0xff) Completed without error 00% 13956 - +# 9 Vendor (0xff) Completed without error 00% 13952 - +#10 Short offline Completed without error 00% 13926 - +#11 Vendor (0xff) Completed without error 00% 13917 - +#12 Vendor (0xff) Completed without error 00% 13839 - +#13 Vendor (0xff) Completed without error 00% 13829 - +#14 Vendor (0xff) Completed without error 00% 13758 - +#15 Vendor (0xff) Completed without error 00% 13719 - +#16 Vendor (0xff) Completed without error 00% 13711 - +#17 Vendor (0xff) Completed without error 00% 13703 - +#18 Vendor (0xff) Completed without error 00% 13694 - +#19 Vendor (0xff) Completed without error 00% 13686 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 36/42 Celsius +Lifetime Min/Max Temperature: -11/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (359) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1441 --- Lifetime Power-On Resets +0x01 0x010 4 15465 --- Power-on Hours +0x01 0x018 6 23621294242 --- Logical Sectors Written +0x01 0x020 6 495231567 --- Number of Write Commands +0x01 0x028 6 43998630486 --- Logical Sectors Read +0x01 0x030 6 484988590 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1450 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 -11 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 54 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT120/CT120M500SSD1/D4905ECE6AA0 b/SSD/Crucial/CT120/CT120M500SSD1/D4905ECE6AA0 new file mode 100644 index 000000000..94c124feb --- /dev/null +++ b/SSD/Crucial/CT120/CT120M500SSD1/D4905ECE6AA0 @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 11/1300 SSDs +Device Model: Crucial_CT120M500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU05 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:59:13 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 555) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2278 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1141 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 055 055 000 - 1352 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 47 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1990 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 063 059 000 - 37 (Min/Max 0/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain P---CK 055 055 000 - 45 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 --- - 17215111605 +247 Host_Program_Page_Count -O--CK 100 100 --- - 9040236 +248 FTL_Program_Page_Count -O--CK 100 100 --- - 1399967447 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 2112 - +# 2 Short offline Completed without error 00% 2094 - +# 3 Short offline Completed without error 00% 2092 - +# 4 Vendor (0xff) Completed without error 00% 1150 - +# 5 Vendor (0xff) Completed without error 00% 65 - +# 6 Vendor (0xff) Completed without error 00% 51 - +# 7 Vendor (0xff) Completed without error 00% 36 - +# 8 Vendor (0xff) Completed without error 00% 21 - +# 9 Vendor (0xff) Completed without error 00% 6 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 33/38 Celsius +Lifetime Min/Max Temperature: 0/41 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (35) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1141 --- Lifetime Power-On Resets +0x01 0x010 4 2278 --- Power-on Hours +0x01 0x018 6 17215111605 --- Logical Sectors Written +0x01 0x020 6 403114111 --- Number of Write Commands +0x01 0x028 6 17234747382 --- Logical Sectors Read +0x01 0x030 6 386016024 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1136 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 36 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 18 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT2000/CT2000MX500SSD1/551DE889495C b/SSD/Crucial/CT2000/CT2000MX500SSD1/551DE889495C new file mode 100644 index 000000000..f9844b622 --- /dev/null +++ b/SSD/Crucial/CT2000/CT2000MX500SSD1/551DE889495C @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT2000MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 31 02:40:10 2020 BST + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 245 + 12 Power_Cycle_Count -O--CK 100 100 000 - 18 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 6 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 82 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 049 000 - 36 (Min/Max 0/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 685202586 +247 Host_Program_Page_Count -O--CK 100 100 000 - 10931290 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 6431705 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 31/45 Celsius +Lifetime Min/Max Temperature: 0/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (58) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 245 --- Power-on Hours +0x01 0x018 6 685202586 --- Logical Sectors Written +0x01 0x020 6 8397930 --- Number of Write Commands +0x01 0x028 6 146040161 --- Logical Sectors Read +0x01 0x030 6 4204397 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 33 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 32 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1273 --- Number of Hardware Resets +0x06 0x010 4 24 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/15C9EE9AC796 b/SSD/Crucial/CT240/CT240BX500SSD1/15C9EE9AC796 new file mode 100644 index 000000000..a62f16c15 --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/15C9EE9AC796 @@ -0,0 +1,178 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 11/1300 SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:03:56 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 406 + 12 Power_Cycle_Count -O--CK 100 100 050 - 31 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 26 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 067 059 050 - 33 (Min/Max 29/41) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 100 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 175176679 +247 Host_Program_Page_Count -O--CK 100 100 050 - 5474271 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 3455 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 3455 [2] log entry is empty +Error 3454 [1] log entry is empty +Error 3453 [0] log entry is empty +Error 3452 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 00 d0 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ DATA + ec 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 IDENTIFY DEVICE + 61 00 18 70 70 00 06 53 00 c8 e8 40 08 00:00:00.000 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 08 00:00:00.000 FLUSH CACHE EXT + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 406 --- Power-on Hours +0x01 0x018 6 175176679 --- Logical Sectors Written +0x01 0x020 6 7698824 --- Number of Write Commands +0x01 0x028 6 27801597 --- Logical Sectors Read +0x01 0x030 6 149161 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT240/CT240BX500SSD1/7A792A48EE6D b/SSD/Crucial/CT240/CT240BX500SSD1/7A792A48EE6D new file mode 100644 index 000000000..f05efd83a --- /dev/null +++ b/SSD/Crucial/CT240/CT240BX500SSD1/7A792A48EE6D @@ -0,0 +1,145 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 11/1300 SSDs +Device Model: CT240BX500SSD1 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: M6CR013 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:03:57 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 720 + 12 Power_Cycle_Count -O--CK 100 100 050 - 52 +171 Program_Fail_Count -O--CK 100 100 050 - 0 +172 Erase_Fail_Count -O--CK 100 100 050 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 050 - 11 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 43 +180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 +183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 +184 Error_Correction_Count -O--CK 100 100 050 - 0 +187 Reported_Uncorrect -O--CK 100 100 050 - 0 +194 Temperature_Celsius -O---K 068 028 050 Past 32 (Min/Max 29/72) +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable ----CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 100 +206 Write_Error_Rate -OSR-K 100 100 050 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 +246 Total_LBAs_Written -O--CK 100 100 050 - 1620700945 +247 Host_Program_Page_Count -O--CK 100 100 050 - 50646904 +248 FTL_Program_Page_Count -O--CK 100 100 050 - 46632960 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 52 --- Lifetime Power-On Resets +0x01 0x010 4 720 --- Power-on Hours +0x01 0x018 6 1620700945 --- Logical Sectors Written +0x01 0x020 6 9732349 --- Number of Write Commands +0x01 0x028 6 14015337 --- Logical Sectors Read +0x01 0x030 6 285163 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT250/CT250MX200SSD1/3154BEC2E922 b/SSD/Crucial/CT250/CT250MX200SSD1/3154BEC2E922 new file mode 100644 index 000000000..21dfdb7f0 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX200SSD1/3154BEC2E922 @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Crucial_CT250MX200SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU03 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 17 15:44:59 2020 AST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 795) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 1 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 1 + 9 Power_On_Hours -O--CK 100 100 000 - 12464 + 12 Power_Cycle_Count -O--CK 100 100 000 - 9187 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 097 097 000 - 97 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1078 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2579 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 4741 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 047 000 - 40 (Min/Max 25/53) +196 Reallocated_Event_Count -O--CK 100 100 000 - 1 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 097 097 001 - 3 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 2 +246 Total_LBAs_Written -O--CK 100 100 000 - 10315534245 +247 Host_Program_Page_Count -O--CK 100 100 000 - 322512701 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 665713013 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 16000 Current Device Internal Status Data log +0x25 GPL R/O 16000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 12463 - +# 2 Vendor (0xff) Completed without error 00% 12445 - +# 3 Vendor (0xff) Completed without error 00% 12404 - +# 4 Vendor (0xff) Completed without error 00% 12373 - +# 5 Vendor (0xff) Completed without error 00% 12309 - +# 6 Vendor (0xff) Completed without error 00% 12273 - +# 7 Vendor (0xff) Completed without error 00% 12220 - +# 8 Vendor (0xff) Completed without error 00% 12098 - +# 9 Vendor (0xff) Completed without error 00% 12048 - +#10 Vendor (0xff) Completed without error 00% 11999 - +#11 Vendor (0xff) Completed without error 00% 11966 - +#12 Vendor (0xff) Completed without error 00% 11937 - +#13 Vendor (0xff) Completed without error 00% 11898 - +#14 Vendor (0xff) Completed without error 00% 11844 - +#15 Vendor (0xff) Completed without error 00% 11506 - +#16 Vendor (0xff) Completed without error 00% 11393 - +#17 Vendor (0xff) Completed without error 00% 11059 - +#18 Vendor (0xff) Completed without error 00% 11040 - +#19 Vendor (0xff) Completed without error 00% 11021 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 38/40 Celsius +Lifetime Min/Max Temperature: 25/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (89) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 9187 --- Lifetime Power-On Resets +0x01 0x010 4 12464 --- Power-on Hours +0x01 0x018 6 10315534245 --- Logical Sectors Written +0x01 0x020 6 154106198 --- Number of Write Commands +0x01 0x028 6 9693042506 --- Logical Sectors Read +0x01 0x030 6 303338040 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 9272 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 41 --- Average Short Term Temperature +0x05 0x018 1 37 --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 36 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 37 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 36321 --- Number of Hardware Resets +0x06 0x010 4 3171 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT250/CT250MX200SSD1/555F2CD3B385 b/SSD/Crucial/CT250/CT250MX200SSD1/555F2CD3B385 new file mode 100644 index 000000000..c11931c97 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX200SSD1/555F2CD3B385 @@ -0,0 +1,218 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Crucial_CT250MX200SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU01 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 18 11:00:35 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x03) Offline data collection activity + is in progress. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 169) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 44111 + 12 Power_Cycle_Count -O--CK 100 100 000 - 127 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 068 068 000 - 972 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 100 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2604 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 062 045 000 - 38 (Min/Max 19/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain P---CK 068 068 000 - 32 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 81284729310 +247 Host_Program_Page_Count -O--CK 100 100 000 - 2610475865 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 6627925590 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 16000 Current Device Internal Status Data log +0x25 GPL R/O 16000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 44110 - +# 2 Vendor (0xff) Completed without error 00% 41321 - +# 3 Vendor (0xff) Completed without error 00% 41294 - +# 4 Vendor (0xff) Completed without error 00% 41249 - +# 5 Vendor (0xff) Completed without error 00% 41204 - +# 6 Vendor (0xff) Completed without error 00% 41159 - +# 7 Vendor (0xff) Completed without error 00% 41114 - +# 8 Vendor (0xff) Completed without error 00% 41069 - +# 9 Vendor (0xff) Completed without error 00% 41025 - +#10 Vendor (0xff) Completed without error 00% 40980 - +#11 Vendor (0xff) Completed without error 00% 40934 - +#12 Vendor (0xff) Completed without error 00% 40890 - +#13 Vendor (0xff) Completed without error 00% 40845 - +#14 Vendor (0xff) Completed without error 00% 40800 - +#15 Vendor (0xff) Completed without error 00% 40755 - +#16 Vendor (0xff) Completed without error 00% 40710 - +#17 Vendor (0xff) Completed without error 00% 40665 - +#18 Vendor (0xff) Completed without error 00% 40620 - +#19 Vendor (0xff) Completed without error 00% 40575 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Completed [00% left] (162666496-162732031) + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 30/44 Celsius +Lifetime Min/Max Temperature: 19/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (148) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 127 --- Lifetime Power-On Resets +0x01 0x010 4 44111 --- Power-on Hours +0x01 0x018 6 81284729310 --- Logical Sectors Written +0x01 0x020 6 2140152497 --- Number of Write Commands +0x01 0x028 6 170269895749 --- Logical Sectors Read +0x01 0x030 6 1791801681 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 126 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 37 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 45 --- Highest Average Long Term Temperature +0x05 0x048 1 30 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 975 --- Number of Hardware Resets +0x06 0x010 4 352 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 32 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT250/CT250MX200SSD1/CF14859573DD b/SSD/Crucial/CT250/CT250MX200SSD1/CF14859573DD new file mode 100644 index 000000000..17b9a1074 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX200SSD1/CF14859573DD @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Crucial_CT250MX200SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU01 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 14:23:42 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 795) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 44384 + 12 Power_Cycle_Count -O--CK 100 100 000 - 171 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 086 086 000 - 442 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 105 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2598 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 3 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 058 000 - 36 (Min/Max 19/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain P---CK 086 086 000 - 14 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 55495222581 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1734289209 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 2346471237 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 16000 Current Device Internal Status Data log +0x25 GPL R/O 16000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 44298 - +# 2 Vendor (0xff) Completed without error 00% 44282 - +# 3 Vendor (0xff) Completed without error 00% 43930 - +# 4 Vendor (0xff) Completed without error 00% 43901 - +# 5 Vendor (0xff) Completed without error 00% 43814 - +# 6 Vendor (0xff) Completed without error 00% 43800 - +# 7 Vendor (0xff) Completed without error 00% 43678 - +# 8 Vendor (0xff) Completed without error 00% 43563 - +# 9 Vendor (0xff) Completed without error 00% 43511 - +#10 Vendor (0xff) Completed without error 00% 43463 - +#11 Vendor (0xff) Completed without error 00% 43322 - +#12 Vendor (0xff) Completed without error 00% 43263 - +#13 Vendor (0xff) Completed without error 00% 43172 - +#14 Vendor (0xff) Completed without error 00% 43108 - +#15 Vendor (0xff) Completed without error 00% 43054 - +#16 Vendor (0xff) Completed without error 00% 42962 - +#17 Vendor (0xff) Completed without error 00% 42903 - +#18 Vendor (0xff) Completed without error 00% 42855 - +#19 Vendor (0xff) Completed without error 00% 42811 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 34/41 Celsius +Lifetime Min/Max Temperature: 19/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (117) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 171 --- Lifetime Power-On Resets +0x01 0x010 4 44384 --- Power-on Hours +0x01 0x018 6 55495222581 --- Logical Sectors Written +0x01 0x020 6 430854580 --- Number of Write Commands +0x01 0x028 6 88079906880 --- Logical Sectors Read +0x01 0x030 6 790325304 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 166 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 976 --- Number of Hardware Resets +0x06 0x010 4 365 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 14 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/0642B30AE5D3 b/SSD/Crucial/CT250/CT250MX500SSD1/0642B30AE5D3 new file mode 100644 index 000000000..9e7513a93 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/0642B30AE5D3 @@ -0,0 +1,215 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR020 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Sep 3 19:15:53 2020 CEST + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 8356 + 12 Power_Cycle_Count -O--CK 100 100 000 - 9 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 065 065 000 - 527 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 5 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 24 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 059 048 000 - 41 (Min/Max 0/52) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 065 065 001 - 35 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 25525366402 +247 Host_Program_Page_Count -O--CK 100 100 000 - 2515233554 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1174266214 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 6555 - +# 2 Short offline Completed without error 00% 5536 - +# 3 Extended offline Completed without error 00% 4798 - +# 4 Short offline Completed without error 00% 4797 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 33/50 Celsius +Lifetime Min/Max Temperature: 0/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (75) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 8356 --- Power-on Hours +0x01 0x018 6 4050529922 --- Logical Sectors Written +0x01 0x020 6 513862118 --- Number of Write Commands +0x01 0x028 6 2368169530 --- Logical Sectors Read +0x01 0x030 6 283999493 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 40 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 39 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 39 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 296 --- Number of Hardware Resets +0x06 0x010 4 13 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 35 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/3ADCE5DB44AA b/SSD/Crucial/CT250/CT250MX500SSD1/3ADCE5DB44AA new file mode 100644 index 000000000..dd06e4e78 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/3ADCE5DB44AA @@ -0,0 +1,213 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR020 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 22 22:27:49 2020 CEST + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1759 + 12 Power_Cycle_Count -O--CK 100 100 000 - 584 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 093 093 000 - 109 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 6 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 30 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 045 000 - 40 (Min/Max 0/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 093 093 001 - 7 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 14120933598 +247 Host_Program_Page_Count -O--CK 100 100 000 - 238305644 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 257032375 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 21/43 Celsius +Lifetime Min/Max Temperature: 0/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (18) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 584 --- Lifetime Power-On Resets +0x01 0x010 4 1759 --- Power-on Hours +0x01 0x018 6 1236031710 --- Logical Sectors Written +0x01 0x020 6 93195989 --- Number of Write Commands +0x01 0x028 6 2821177970 --- Logical Sectors Read +0x01 0x030 6 77995538 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 36 --- Average Short Term Temperature +0x05 0x018 1 35 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 44 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3678 --- Number of Hardware Resets +0x06 0x010 4 449 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 35 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/4186417EF027 b/SSD/Crucial/CT250/CT250MX500SSD1/4186417EF027 new file mode 100644 index 000000000..7088294fc --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/4186417EF027 @@ -0,0 +1,213 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:04 2020 CEST + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 4054 + 12 Power_Cycle_Count -O--CK 100 100 000 - 15 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 8 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 5 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 33 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 060 045 000 - 40 (Min/Max 0/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 1449098198 +247 Host_Program_Page_Count -O--CK 100 100 000 - 24275104 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 3691915 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 29/55 Celsius +Lifetime Min/Max Temperature: 0/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (106) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 4054 --- Power-on Hours +0x01 0x018 6 1449098198 --- Logical Sectors Written +0x01 0x020 6 15127250 --- Number of Write Commands +0x01 0x028 6 8240138 --- Logical Sectors Read +0x01 0x030 6 167597 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 40 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 142 --- Number of Hardware Resets +0x06 0x010 4 29 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 28 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/5FBFEFF63244 b/SSD/Crucial/CT250/CT250MX500SSD1/5FBFEFF63244 new file mode 100644 index 000000000..e08b9cff0 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/5FBFEFF63244 @@ -0,0 +1,213 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 07:45:53 2020 GMT + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 512 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 12 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 27 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 065 054 000 - 35 (Min/Max 0/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 1377930222 +247 Host_Program_Page_Count -O--CK 100 100 000 - 24377345 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 39135767 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 26/41 Celsius +Lifetime Min/Max Temperature: 0/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (29) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3 --- Lifetime Power-On Resets +0x01 0x010 4 512 --- Power-on Hours +0x01 0x018 6 1377930222 --- Logical Sectors Written +0x01 0x020 6 17836086 --- Number of Write Commands +0x01 0x028 6 806217314 --- Logical Sectors Read +0x01 0x030 6 29423728 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 40 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 110 --- Number of Hardware Resets +0x06 0x010 4 18 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 40 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/8CA143458074 b/SSD/Crucial/CT250/CT250MX500SSD1/8CA143458074 new file mode 100644 index 000000000..ed939b1f4 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/8CA143458074 @@ -0,0 +1,211 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 14:09:19 2020 CDT + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 8154 + 12 Power_Cycle_Count -O--CK 100 100 000 - 53 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 092 092 000 - 130 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 40 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 28 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 064 056 000 - 36 (Min/Max 0/44) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 092 092 001 - 8 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 14461690102 +247 Host_Program_Page_Count -O--CK 100 100 000 - 258107598 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 409462676 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 31/41 Celsius +Lifetime Min/Max Temperature: 0/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (113) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 53 --- Lifetime Power-On Resets +0x01 0x010 4 8154 --- Power-on Hours +0x01 0x018 6 1576788214 --- Logical Sectors Written +0x01 0x020 6 439153668 --- Number of Write Commands +0x01 0x028 6 2346506804 --- Logical Sectors Read +0x01 0x030 6 37743739 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 40 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 241 --- Number of Hardware Resets +0x06 0x010 4 62 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/B48BA31A1312 b/SSD/Crucial/CT250/CT250MX500SSD1/B48BA31A1312 new file mode 100644 index 000000000..e9d799039 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/B48BA31A1312 @@ -0,0 +1,213 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:04 2020 CEST + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 3701 + 12 Power_Cycle_Count -O--CK 100 100 000 - 15 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 8 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 5 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 30 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 062 049 000 - 38 (Min/Max 0/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 1457322129 +247 Host_Program_Page_Count -O--CK 100 100 000 - 24412221 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 3712025 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 28/51 Celsius +Lifetime Min/Max Temperature: 0/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (55) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 3701 --- Power-on Hours +0x01 0x018 6 1457322129 --- Logical Sectors Written +0x01 0x020 6 15176027 --- Number of Write Commands +0x01 0x028 6 8555483 --- Logical Sectors Read +0x01 0x030 6 178223 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 39 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 142 --- Number of Hardware Resets +0x06 0x010 4 31 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 28 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT250/CT250MX500SSD1/E9AF292EACEE b/SSD/Crucial/CT250/CT250MX500SSD1/E9AF292EACEE new file mode 100644 index 000000000..72d946ea7 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD1/E9AF292EACEE @@ -0,0 +1,216 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT250MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 18 01:07:18 2020 CDT + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7585 + 12 Power_Cycle_Count -O--CK 100 100 000 - 585 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 089 089 000 - 174 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 253 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 22 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 059 044 000 - 41 (Min/Max 0/56) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1 +202 Percent_Lifetime_Remain ----CK 089 089 001 - 11 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 22478551682 +247 Host_Program_Page_Count -O--CK 100 100 000 - 392252606 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 360972245 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2389 - +# 2 Short offline Completed without error 00% 1443 - +# 3 Short offline Completed without error 00% 1436 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 40/43 Celsius +Lifetime Min/Max Temperature: 0/56 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (3) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 585 --- Lifetime Power-On Resets +0x01 0x010 4 7585 --- Power-on Hours +0x01 0x018 6 1003715202 --- Logical Sectors Written +0x01 0x020 6 256070594 --- Number of Write Commands +0x01 0x028 6 3785842553 --- Logical Sectors Read +0x01 0x030 6 174657961 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 254 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 36 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4637 --- Number of Hardware Resets +0x06 0x010 4 517 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT250/CT250MX500SSD4/23EC30ADBD8C b/SSD/Crucial/CT250/CT250MX500SSD4/23EC30ADBD8C new file mode 100644 index 000000000..0f81b6d46 --- /dev/null +++ b/SSD/Crucial/CT250/CT250MX500SSD4/23EC30ADBD8C @@ -0,0 +1,213 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT250MX500SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 19:03:56 2020 CDT + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1130 + 12 Power_Cycle_Count -O--CK 100 100 000 - 90 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 18 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 53 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 29 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 058 025 000 - 42 (Min/Max 0/75) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 2128650150 +247 Host_Program_Page_Count -O--CK 100 100 000 - 57301137 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 31892782 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Completed [00% left] (0-65535) +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 28/45 Celsius +Lifetime Min/Max Temperature: 0/75 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (52) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 90 --- Lifetime Power-On Resets +0x01 0x010 4 1130 --- Power-on Hours +0x01 0x018 6 2128650150 --- Logical Sectors Written +0x01 0x020 6 17528429 --- Number of Write Commands +0x01 0x028 6 1018755889 --- Logical Sectors Read +0x01 0x030 6 10016003 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 53 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 42 --- Current Temperature +0x05 0x010 1 43 --- Average Short Term Temperature +0x05 0x018 1 43 --- Average Long Term Temperature +0x05 0x020 1 75 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 44 --- Highest Average Short Term Temperature +0x05 0x038 1 42 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 42 --- Lowest Average Long Term Temperature +0x05 0x050 4 50 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 359 --- Number of Hardware Resets +0x06 0x010 4 63 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Crucial/CT275/CT275MX300SSD4/10521A74063E b/SSD/Crucial/CT275/CT275MX300SSD4/10521A74063E new file mode 100644 index 000000000..66e9beec7 --- /dev/null +++ b/SSD/Crucial/CT275/CT275MX300SSD4/10521A74063E @@ -0,0 +1,208 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Crucial_CT275MX300SSD4 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR060 +User Capacity: 275,064,201,216 bytes [275 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 28 16:15:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 728) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 5125 + 12 Power_Cycle_Count -O--CK 100 100 000 - 3078 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 097 097 000 - 51 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1363 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 1 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 073 035 000 - 27 (Min/Max 13/65) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 097 097 001 - 3 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 11726443236 +247 Host_Program_Page_Count -O--CK 100 100 000 - 366965929 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 224017297 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1245 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 4987 - +# 2 Vendor (0xff) Completed without error 00% 2971 - +# 3 Vendor (0xff) Completed without error 00% 2822 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 21/27 Celsius +Lifetime Min/Max Temperature: 13/65 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (441) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3078 --- Lifetime Power-On Resets +0x01 0x010 4 5125 --- Power-on Hours +0x01 0x018 6 11726443236 --- Logical Sectors Written +0x01 0x020 6 124930211 --- Number of Write Commands +0x01 0x028 6 19529076736 --- Logical Sectors Read +0x01 0x030 6 322219113 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3171 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 36 --- Average Long Term Temperature +0x05 0x020 1 65 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 35 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 15108 --- Number of Hardware Resets +0x06 0x010 4 6931 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT480/CT480M500SSD1/5A8BBB232F57 b/SSD/Crucial/CT480/CT480M500SSD1/5A8BBB232F57 new file mode 100644 index 000000000..7aa757cfa --- /dev/null +++ b/SSD/Crucial/CT480/CT480M500SSD1/5A8BBB232F57 @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 11/1300 SSDs +Device Model: Crucial_CT480M500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU03 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 14:36:32 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2235) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 37) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 4 + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 000 - 2 + 9 Power_On_Hours -O--CK 100 100 000 - 13942 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1681 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 097 097 000 - 119 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 117 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 8217 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 054 000 - -10 (Min/Max -10/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 18 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain P---CK 097 097 000 - 3 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 --- - 66506377532 +247 Host_Program_Page_Count -O--CK 100 100 --- - 2089580588 +248 FTL_Program_Page_Count -O--CK 100 100 --- - 1660640891 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 429 Current Device Internal Status Data log +0x25 GPL R/O 145 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 13276 - +# 2 Vendor (0xff) Completed without error 00% 13264 - +# 3 Vendor (0xff) Completed without error 00% 13245 - +# 4 Vendor (0xff) Completed without error 00% 13225 - +# 5 Vendor (0xff) Completed without error 00% 13206 - +# 6 Vendor (0xff) Completed without error 00% 13187 - +# 7 Vendor (0xff) Completed without error 00% 13170 - +# 8 Vendor (0xff) Completed without error 00% 13153 - +# 9 Vendor (0xff) Completed without error 00% 13134 - +#10 Vendor (0xff) Completed without error 00% 13104 - +#11 Vendor (0xff) Completed without error 00% 13087 - +#12 Vendor (0xff) Completed without error 00% 13066 - +#13 Vendor (0xff) Completed without error 00% 13049 - +#14 Vendor (0xff) Completed without error 00% 13028 - +#15 Vendor (0xff) Completed without error 00% 13010 - +#16 Vendor (0xff) Completed without error 00% 12991 - +#17 Vendor (0xff) Completed without error 00% 12969 - +#18 Vendor (0xff) Completed without error 00% 12950 - +#19 Vendor (0xff) Completed without error 00% 12933 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: -10 Celsius +Power Cycle Min/Max Temperature: -10/-10 Celsius +Lifetime Min/Max Temperature: -10/46 Celsius +Under/Over Temperature Limit Count: 37533/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (141) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1681 --- Lifetime Power-On Resets +0x01 0x010 4 13942 --- Power-on Hours +0x01 0x018 6 66506377532 --- Logical Sectors Written +0x01 0x020 6 632550966 --- Number of Write Commands +0x01 0x028 6 51053511024 --- Logical Sectors Read +0x01 0x030 6 611778123 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1953 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 -10 --- Current Temperature +0x05 0x010 1 -10 --- Average Short Term Temperature +0x05 0x018 1 -10 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 -10 --- Lowest Temperature +0x05 0x030 1 46 --- Highest Average Short Term Temperature +0x05 0x038 1 -10 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 -10 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 87624 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT500/CT500MX500SSD1/2BA2A8B5D5C7 b/SSD/Crucial/CT500/CT500MX500SSD1/2BA2A8B5D5C7 new file mode 100644 index 000000000..d095ea4d9 --- /dev/null +++ b/SSD/Crucial/CT500/CT500MX500SSD1/2BA2A8B5D5C7 @@ -0,0 +1,229 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron MX500 SSDs +Device Model: CT500MX500SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M3CR023 +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 13 20:52:28 2020 CEST + +==> WARNING: This firmware returns bogus raw values in attribute 197 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1853 + 12 Power_Cycle_Count -O--CK 100 100 000 - 18 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 100 100 000 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 5 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 46 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 059 049 000 - 41 (Min/Max 0/51) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 518847280 +247 Host_Program_Page_Count -O--CK 100 100 000 - 8653710 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1820879 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Selective offline Completed without error 00% 1844 - +# 2 Short offline Completed without error 00% 1832 - +# 3 Conveyance offline Completed without error 00% 1831 - +# 4 Selective offline Completed without error 00% 1817 - +# 5 Short offline Completed without error 00% 1805 - +# 6 Conveyance offline Completed without error 00% 1804 - +# 7 Selective offline Completed without error 00% 1791 - +# 8 Extended offline Completed without error 00% 1786 - +# 9 Short offline Completed without error 00% 1780 - +#10 Conveyance offline Completed without error 00% 1779 - +#11 Selective offline Completed without error 00% 1765 - +#12 Short offline Completed without error 00% 1754 - +#13 Conveyance offline Completed without error 00% 1753 - +#14 Selective offline Completed without error 00% 1739 - +#15 Short offline Completed without error 00% 1727 - +#16 Conveyance offline Completed without error 00% 1726 - +#17 Selective offline Completed without error 00% 1713 - +#18 Short offline Completed without error 00% 1701 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 586063902 683741218 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 33/51 Celsius +Lifetime Min/Max Temperature: 0/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (22) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 1853 --- Power-on Hours +0x01 0x018 6 518847280 --- Logical Sectors Written +0x01 0x020 6 22646273 --- Number of Write Commands +0x01 0x028 6 130692479 --- Logical Sectors Read +0x01 0x030 6 2326809 --- Number of Read Commands +0x01 0x038 6 4294967296 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 40 --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 290 --- Number of Hardware Resets +0x06 0x010 4 11 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 124 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Crucial/CT525/CT525MX300SSD1/2D73EAF826E4 b/SSD/Crucial/CT525/CT525MX300SSD1/2D73EAF826E4 new file mode 100644 index 000000000..fa7ca145e --- /dev/null +++ b/SSD/Crucial/CT525/CT525MX300SSD1/2D73EAF826E4 @@ -0,0 +1,102 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Crucial_CT525MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR040 +User Capacity: 525,112,713,216 bytes [525 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 17:58:11 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1391) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 + 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 739 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1183 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 Ave_Block-Erase_Count 0x0032 100 100 000 Old_age Always - 9 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 10 +183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 +184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 076 044 000 Old_age Always - 24 (Min/Max 17/56) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +202 Percent_Lifetime_Remain 0x0030 100 100 001 Old_age Offline - 0 +206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 +246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 3774522373 +247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 119401311 +248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 65784355 +180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 1948 +210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Crucial/CT525/CT525MX300SSD1/2DCB44CC2F04 b/SSD/Crucial/CT525/CT525MX300SSD1/2DCB44CC2F04 new file mode 100644 index 000000000..582f0cbc1 --- /dev/null +++ b/SSD/Crucial/CT525/CT525MX300SSD1/2DCB44CC2F04 @@ -0,0 +1,218 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 11/1300 SSDs +Device Model: Crucial_CT525MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR070 +User Capacity: 525,112,713,216 bytes [525 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:06 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x03) Offline data collection activity + is in progress. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 80) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 6) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 2 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 1 + 9 Power_On_Hours -O--CK 100 100 000 - 14060 + 12 Power_Cycle_Count -O--CK 100 100 000 - 186 +171 Program_Fail_Count -O--CK 100 100 000 - 1 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 092 092 000 - 125 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 115 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 15 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 059 043 000 - 41 (Min/Max 13/57) +196 Reallocated_Event_Count -O--CK 100 100 000 - 1 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1228 +202 Percent_Lifetime_Remain ----CK 092 092 001 - 8 +206 Write_Error_Rate -OSR-- 100 100 000 - 1 +246 Total_LBAs_Written -O--CK 100 100 000 - 51934401114 +247 Host_Program_Page_Count -O--CK 100 100 000 - 1635294960 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1018222710 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1935 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 4 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 14060 - +# 2 Vendor (0xff) Completed without error 00% 13910 - +# 3 Vendor (0xff) Completed without error 00% 13737 - +# 4 Reserved (0x2b) Interrupted (host reset) 110% 11051 - +# 5 Reserved (0x2a) Interrupted (host reset) 100% 10794 - +# 6 Reserved (0x2a) Interrupted (host reset) 100% 10794 - +# 7 Reserved (0x2b) Interrupted (host reset) 110% 11051 - +# 8 Reserved (0x2a) Interrupted (host reset) 110% 11051 - +# 9 Reserved (0x29) Interrupted (host reset) 90% 10537 - +#10 Reserved (0x29) Interrupted (host reset) 90% 10537 - +#11 Reserved (0x2a) Interrupted (host reset) 100% 10794 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: 34/47 Celsius +Lifetime Min/Max Temperature: 13/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (362) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 186 --- Lifetime Power-On Resets +0x01 0x010 4 14060 --- Power-on Hours +0x01 0x018 6 51934401114 --- Logical Sectors Written +0x01 0x020 6 1034103282 --- Number of Write Commands +0x01 0x028 6 89891809498 --- Logical Sectors Read +0x01 0x030 6 710646247 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1424 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 57 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3637 --- Number of Hardware Resets +0x06 0x010 4 317 --- Number of ASR Events +0x06 0x018 4 1228 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 28 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Crucial/CT525/CT525MX300SSD1/33662F8248F3 b/SSD/Crucial/CT525/CT525MX300SSD1/33662F8248F3 new file mode 100644 index 000000000..c9337a102 --- /dev/null +++ b/SSD/Crucial/CT525/CT525MX300SSD1/33662F8248F3 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Crucial_CT525MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR031 +User Capacity: 525,112,713,216 bytes [525 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 25 19:04:56 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1391) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10027 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2513 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 099 099 000 - 27 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 284 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 072 054 000 - 28 (Min/Max 12/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 099 099 001 - 1 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 11543141096 +247 Host_Program_Page_Count -O--CK 100 100 000 - 363048017 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 176852664 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1925 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 9849 - +# 2 Vendor (0xff) Completed without error 00% 9760 - +# 3 Vendor (0xff) Completed without error 00% 9571 - +# 4 Vendor (0xff) Completed without error 00% 9347 - +# 5 Vendor (0xff) Completed without error 00% 9163 - +# 6 Vendor (0xff) Completed without error 00% 9002 - +# 7 Vendor (0xff) Completed without error 00% 8808 - +# 8 Vendor (0xff) Completed without error 00% 8603 - +# 9 Vendor (0xff) Completed without error 00% 8424 - +#10 Vendor (0xff) Completed without error 00% 8247 - +#11 Vendor (0xff) Completed without error 00% 8031 - +#12 Vendor (0xff) Completed without error 00% 7908 - +#13 Vendor (0xff) Completed without error 00% 7719 - +#14 Short offline Aborted by host 00% 6246 - +#15 Vendor (0xff) Completed without error 00% 6224 - +#16 Short offline Completed without error 00% 3875 - +#17 Vendor (0xff) Completed without error 00% 3726 - +#18 Short offline Aborted by host 00% 3464 - +#19 Short offline Completed without error 00% 3439 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 22/28 Celsius +Lifetime Min/Max Temperature: 12/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (407) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2513 --- Lifetime Power-On Resets +0x01 0x010 4 10027 --- Power-on Hours +0x01 0x018 6 11543141096 --- Logical Sectors Written +0x01 0x020 6 215617608 --- Number of Write Commands +0x01 0x028 6 4355578742 --- Logical Sectors Read +0x01 0x030 6 47729536 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3027 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 30 --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 12 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 28 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7958 --- Number of Hardware Resets +0x06 0x010 4 1859 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/CT525/CT525MX300SSD1/8DDEE65F1778 b/SSD/Crucial/CT525/CT525MX300SSD1/8DDEE65F1778 new file mode 100644 index 000000000..7cc7d5644 --- /dev/null +++ b/SSD/Crucial/CT525/CT525MX300SSD1/8DDEE65F1778 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 11/1300 SSDs +Device Model: Crucial_CT525MX300SSD1 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0CR040 +User Capacity: 525,112,713,216 bytes [525 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 14:10:03 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x04) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 217) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 29424 + 12 Power_Cycle_Count -O--CK 100 100 000 - 65 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 090 090 000 - 161 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 57 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 066 054 000 - 34 (Min/Max 20/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 090 090 001 - 10 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 64602746214 +247 Host_Program_Page_Count -O--CK 100 100 000 - 2018835841 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1055596930 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1953 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 29416 - +# 2 Vendor (0xff) Completed without error 00% 29050 - +# 3 Vendor (0xff) Completed without error 00% 28620 - +# 4 Vendor (0xff) Completed without error 00% 28182 - +# 5 Vendor (0xff) Completed without error 00% 27755 - +# 6 Vendor (0xff) Completed without error 00% 27295 - +# 7 Vendor (0xff) Completed without error 00% 26922 - +# 8 Vendor (0xff) Completed without error 00% 26577 - +# 9 Vendor (0xff) Completed without error 00% 26272 - +#10 Vendor (0xff) Completed without error 00% 26001 - +#11 Vendor (0xff) Completed without error 00% 25553 - +#12 Vendor (0xff) Completed without error 00% 25166 - +#13 Vendor (0xff) Completed without error 00% 13930 - +#14 Vendor (0xff) Completed without error 00% 13539 - +#15 Vendor (0xff) Completed without error 00% 13184 - +#16 Vendor (0xff) Completed without error 00% 2957 - +#17 Vendor (0xff) Completed without error 00% 2735 - +#18 Vendor (0xff) Completed without error 00% 2530 - +#19 Vendor (0xff) Completed without error 00% 2308 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 30/46 Celsius +Lifetime Min/Max Temperature: 20/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (378) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 65 --- Lifetime Power-On Resets +0x01 0x010 4 29424 --- Power-on Hours +0x01 0x018 6 64602746214 --- Logical Sectors Written +0x01 0x020 6 1487030455 --- Number of Write Commands +0x01 0x028 6 17988864334 --- Logical Sectors Read +0x01 0x030 6 167637053 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 150 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 30 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 26 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 580 --- Number of Hardware Resets +0x06 0x010 4 105 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Crucial/M4/M4-CT128M4SSD3/0658ECB38AA6 b/SSD/Crucial/M4/M4-CT128M4SSD3/0658ECB38AA6 new file mode 100644 index 000000000..6bc45bb29 --- /dev/null +++ b/SSD/Crucial/M4/M4-CT128M4SSD3/0658ECB38AA6 @@ -0,0 +1,101 @@ +smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron RealSSD m4/C400/P400 +Device Model: M4-CT128M4SSD3 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: 07MH +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 3.0 Gb/s +Local Time is: Thu Oct 22 22:31:19 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 595) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 110 + 12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 114 +170 Grown_Failing_Block_Ct 0x0033 100 100 010 Pre-fail Always - 0 +171 Program_Fail_Count 0x0032 100 100 001 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 001 Old_age Always - 0 +173 Wear_Leveling_Count 0x0033 100 100 010 Pre-fail Always - 0 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 001 Old_age Always - 9 +181 Non4k_Aligned_Access 0x0022 100 100 001 Old_age Always - 50 45 5 +183 SATA_Iface_Downshift 0x0032 100 100 001 Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 050 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 001 Old_age Always - 0 +189 Factory_Bad_Block_Ct 0x000e 100 100 001 Old_age Always - 115 +194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 0 +195 Hardware_ECC_Recovered 0x003a 100 100 001 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 001 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 0 +202 Perc_Rated_Life_Used 0x0018 100 100 001 Old_age Offline - 0 +206 Write_Error_Rate 0x000e 100 100 001 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Dogfish/SSD/SSD 64GB/A6C7EE1F6C28 b/SSD/Dogfish/SSD/SSD 64GB/A6C7EE1F6C28 new file mode 100644 index 000000000..b820d3015 --- /dev/null +++ b/SSD/Dogfish/SSD/SSD 64GB/A6C7EE1F6C28 @@ -0,0 +1,93 @@ +smartctl 7.1 2019-12-30 r5022 [i386-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Dogfish SSD 64GB +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: 1.00 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Wed Oct 21 16:58:48 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 251 + 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 102 +160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3 +166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 2 +192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 8 +194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 33 +195 Hardware_ECC_Recovered 0x0012 100 100 000 Old_age Always - 0 +196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0 +241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 2076 +242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 1765 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/FORESEE/64/64GB SSD/4178AED9DC98 b/SSD/FORESEE/64/64GB SSD/4178AED9DC98 new file mode 100644 index 000000000..8300f98cd --- /dev/null +++ b/SSD/FORESEE/64/64GB SSD/4178AED9DC98 @@ -0,0 +1,157 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: FORESEE 64GB SSD +Serial Number: -- +Firmware Version: N1007C +User Capacity: 64,017,212,928 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Nov 1 04:42:02 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 25) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 11 + 12 Power_Cycle_Count ------ 100 100 000 - 15 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 101 +163 Unknown_Attribute ------ 100 100 000 - 6 +164 Unknown_Attribute ------ 100 100 000 - 10399 +165 Unknown_Attribute ------ 100 100 000 - 18 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 5 +168 Unknown_Attribute ------ 100 100 000 - 3000 +169 Unknown_Attribute ------ 100 100 000 - 100 +177 Wear_Leveling_Count ------ 100 100 050 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 3 +194 Temperature_Celsius ------ 100 100 000 - 48 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Total_LBAs_Written ------ 100 100 000 - 5442 +242 Total_LBAs_Read ------ 100 100 000 - 446 +245 Unknown_Attribute ------ 100 100 000 - 10399 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Abort offline test Aborted by host 90% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 15 --- Lifetime Power-On Resets +0x01 0x010 4 11 --- Power-on Hours +0x01 0x018 6 356709721 --- Logical Sectors Written +0x01 0x020 6 14031688 --- Number of Write Commands +0x01 0x028 6 29255122 --- Logical Sectors Read +0x01 0x030 6 522436 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 56864 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/Goodram/SSD/SSD 120GB/859EFFD99FC2 b/SSD/Goodram/SSD/SSD 120GB/859EFFD99FC2 new file mode 100644 index 000000000..93177556e --- /dev/null +++ b/SSD/Goodram/SSD/SSD 120GB/859EFFD99FC2 @@ -0,0 +1,90 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: GOODRAM +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFM10.6 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 22 20:38:16 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 32) minutes. +Conveyance self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4139 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 1187 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 093 093 010 Pre-fail Always - 0/99 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 65 (Average 39) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 167 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 96 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 2948 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Goodram/SSD/SSD 240GB/24AF82D242BD b/SSD/Goodram/SSD/SSD 240GB/24AF82D242BD new file mode 100644 index 000000000..a152d9222 --- /dev/null +++ b/SSD/Goodram/SSD/SSD 240GB/24AF82D242BD @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: GOODRAM +Serial Number: -- +Firmware Version: SAFM01.7 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:17:10 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 36222 + 12 Power_Cycle_Count -O--C- 100 100 000 - 61 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 1 +170 Bad_Blk_Ct_Erl/Lat PO---- 098 098 010 - 1/530 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 444 (Average 364) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 53 +194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 29/30) +218 CRC_Error_Count PO-R-- 100 100 050 - 1 +231 SSD_Life_Left PO--C- 100 100 000 - 88 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 64835 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 61 --- Lifetime Power-On Resets +0x01 0x018 6 135970440517 --- Logical Sectors Written +0x01 0x020 6 967427735 --- Number of Write Commands +0x01 0x028 6 33977619902 --- Logical Sectors Read +0x01 0x030 6 2727596953 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 1250 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 442 --- Number of Hardware Resets +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 1 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 270 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 235 Device-to-host register FISes sent due to a COMRESET +0x000f 2 1 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Goodram/SSD/SSD 240GB/4F3A2E047C7B b/SSD/Goodram/SSD/SSD 240GB/4F3A2E047C7B new file mode 100644 index 000000000..ab5ea18f0 --- /dev/null +++ b/SSD/Goodram/SSD/SSD 240GB/4F3A2E047C7B @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: GOODRAM +Serial Number: -- +Firmware Version: SAFM01.7 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:17:10 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 36221 + 12 Power_Cycle_Count -O--C- 100 100 000 - 63 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 067 067 010 - 24/730 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 440 (Average 362) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 55 +194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 29/30) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 88 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 65132 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 63 --- Lifetime Power-On Resets +0x01 0x018 6 136592830697 --- Logical Sectors Written +0x01 0x020 6 973971892 --- Number of Write Commands +0x01 0x028 6 34807923962 --- Logical Sectors Read +0x01 0x030 6 2937634067 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 63074 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 372 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 247 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 278 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/AAD008A412EC b/SSD/Hoodisk/SSD/SSD 32GB/AAD008A412EC new file mode 100644 index 000000000..cfd2fb514 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/AAD008A412EC @@ -0,0 +1,154 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBBA3 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 20 12:40:04 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2999 + 12 Power_Cycle_Count -O--C- 100 100 000 - 14 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 082 082 010 - 14 +173 Unknown_Attribute -O--C- 100 100 000 - 2555962 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 9 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Temperature_Celsius PO--C- 100 100 000 - 96 +241 Total_LBAs_Written -O--C- 100 100 000 - 371 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 2999 --- Power-on Hours +0x01 0x018 6 779534975 --- Logical Sectors Written +0x01 0x028 6 636392159 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 75 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 76 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 32GB/B03D1061FAB9 b/SSD/Hoodisk/SSD/SSD 32GB/B03D1061FAB9 new file mode 100644 index 000000000..b49ef9ff5 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 32GB/B03D1061FAB9 @@ -0,0 +1,154 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-STABLE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 21 07:01:09 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 16) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 9704 + 12 Power_Cycle_Count -O--C- 100 100 000 - 29 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 069 069 010 - 75 +173 Unknown_Attribute -O--C- 100 100 000 - 2687040 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 26 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Temperature_Celsius PO--C- 100 100 000 - 98 +241 Total_LBAs_Written -O--C- 100 100 000 - 1207 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 00% 7 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 29 --- Lifetime Power-On Resets +0x01 0x010 4 9704 --- Power-on Hours +0x01 0x018 6 2532716394 --- Logical Sectors Written +0x01 0x028 6 10877507 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/805B6F0810F7 b/SSD/Hoodisk/SSD/SSD 64GB/805B6F0810F7 new file mode 100644 index 000000000..9e938cfa6 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/805B6F0810F7 @@ -0,0 +1,154 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBB.3 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 27 10:09:18 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 65 + 12 Power_Cycle_Count -O--C- 100 100 000 - 16 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 080 080 010 - 31 +173 Unknown_Attribute -O--C- 100 100 000 - 65540 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 9 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Temperature_Celsius PO--C- 100 100 000 - 99 +241 Total_LBAs_Written -O--C- 100 100 000 - 38 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 65 --- Power-on Hours +0x01 0x018 6 79877403 --- Logical Sectors Written +0x01 0x028 6 19168741 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 34 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 35 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Hoodisk/SSD/SSD 64GB/F5CCE3582FD2 b/SSD/Hoodisk/SSD/SSD 64GB/F5CCE3582FD2 new file mode 100644 index 000000000..30dcfbe84 --- /dev/null +++ b/SSD/Hoodisk/SSD/SSD 64GB/F5CCE3582FD2 @@ -0,0 +1,88 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: Hoodisk SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.1 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 16:50:11 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 8608 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 139 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 078 078 010 Pre-fail Always - 0/124 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 143 (Average 124) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 96 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 95 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 2558 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Intel/SSDSA2/SSDSA2CW120G3/76CDFA067F50 b/SSD/Intel/SSDSA2/SSDSA2CW120G3/76CDFA067F50 new file mode 100644 index 000000000..dc42c5c70 --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2CW120G3/76CDFA067F50 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2CW120G3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10362 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sun Jul 26 20:39:37 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Unexpected SCT status 0x0002 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 17) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7825 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2314 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +183 SATA_Downshift_Count ----CK 100 100 000 - 1245 +184 End-to-End_Error -O--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 433 +199 CRC_Error_Count ----CK 100 100 000 - 2815 +225 Host_Writes_32MiB -O--CK 100 100 000 - 142236 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 819 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 99 +228 Workload_Minutes -O--CK 100 100 000 - 1518102 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 142236 +242 Host_Reads_32MiB -O--CK 100 100 000 - 165777 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2314 --- Lifetime Power-On Resets +0x01 0x010 4 7825 --- Power-on Hours +0x01 0x018 6 9321621774 --- Logical Sectors Written +0x01 0x020 6 76759144 --- Number of Write Commands +0x01 0x028 6 10864420733 --- Logical Sectors Read +0x01 0x030 6 110259460 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 95 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7148 --- Number of Hardware Resets +0x06 0x010 4 1329 --- Number of ASR Events +0x06 0x018 4 2815 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Intel/SSDSA2/SSDSA2CW160G3/3F9276F79CE0 b/SSD/Intel/SSDSA2/SSDSA2CW160G3/3F9276F79CE0 new file mode 100644 index 000000000..e7f90ff5f --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2CW160G3/3F9276F79CE0 @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 320 Series SSDs +Device Model: INTEL SSDSA2CW160G3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 4PC10362 +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Sun Oct 4 21:42:14 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0002 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 14640 + 12 Power_Cycle_Count -O--CK 100 100 000 - 4884 +170 Reserve_Block_Count PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +183 SATA_Downshift_Count ----CK 100 100 000 - 60 +184 End-to-End_Error -O--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 111 +199 CRC_Error_Count ----CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 447967 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 4294967295 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 281474976710655 +228 Workload_Minutes -O--CK 100 100 000 - 4160749567 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 447967 +242 Host_Reads_32MiB -O--CK 100 100 000 - 294486 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Log Directories not read due to '-F nologdir' option + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +Read SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 4884 --- Lifetime Power-On Resets +0x01 0x010 4 14640 --- Power-on Hours +0x01 0x018 6 29357988316 --- Logical Sectors Written +0x01 0x020 6 948619378 --- Number of Write Commands +0x01 0x028 6 19299473038 --- Logical Sectors Read +0x01 0x030 6 367313830 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 14486 --- Number of Hardware Resets +0x06 0x010 4 4918784 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Intel/SSDSA2/SSDSA2M040G2GC/778381049770 b/SSD/Intel/SSDSA2/SSDSA2M040G2GC/778381049770 new file mode 100644 index 000000000..12355ebf7 --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2M040G2GC/778381049770 @@ -0,0 +1,141 @@ +smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel X18-M/X25-M/X25-V G2 SSDs +Device Model: INTEL SSDSA2M040G2GC +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 2CV102HD +User Capacity: 40,020,664,320 bytes [40.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Wed Aug 19 20:26:12 2020 CEST + +==> WARNING: This drive may require a firmware update to +fix possible drive hangs when reading SMART self-test log: +http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18363 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 65756 + 12 Power_Cycle_Count -O--CK 100 100 000 - 123 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 65 +225 Host_Writes_32MiB ----CK 200 200 000 - 414459 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 4244 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 1 +228 Workload_Minutes -O--CK 100 100 000 - 3429892045 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 090 090 000 - 0 +184 End-to-End_Error PO--CK 100 100 099 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 8 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (8 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Invalid Self-test Log index = 0x0053 (reserved = 0x00) +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 13 Device-to-host non-data FIS retries +0x0009 4 235 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 236 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Intel/SSDSA2/SSDSA2M160G2GC/11FA7399103B b/SSD/Intel/SSDSA2/SSDSA2M160G2GC/11FA7399103B new file mode 100644 index 000000000..3a9f455ab --- /dev/null +++ b/SSD/Intel/SSDSA2/SSDSA2M160G2GC/11FA7399103B @@ -0,0 +1,142 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel X18-M/X25-M/X25-V G2 SSDs +Device Model: INTEL SSDSA2M160G2GC +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 2CV102HA +User Capacity: 160,041,885,696 bytes [160 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Thu Aug 27 08:34:51 2020 CEST + +==> WARNING: This drive may require a firmware update to +fix possible drive hangs when reading SMART self-test log: +https://downloadcenter.intel.com/download/26491 + +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1) seconds. +Offline data collection +capabilities: (0x75) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 3 Spin_Up_Time -----K 100 100 000 - 0 + 4 Start_Stop_Count ----CK 100 100 000 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 1 + 9 Power_On_Hours -O--CK 100 100 000 - 11347 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1155 +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 86 +225 Host_Writes_32MiB ----CK 200 200 000 - 244077 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 8865 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 12 +228 Workload_Minutes -O--CK 100 100 000 - 281246578 +232 Available_Reservd_Space PO--CK 099 099 010 - 0 +233 Media_Wearout_Indicator -O--CK 097 097 000 - 0 +184 End-to-End_Error PO--CK 100 100 099 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 8 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (8 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x0008 4 0 Device-to-host non-data FIS retries +0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 4 0 R_ERR response for host-to-device data FIS, CRC +0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BA200G3T/4B2E23F452AA b/SSD/Intel/SSDSC2/SSDSC2BA200G3T/4B2E23F452AA new file mode 100644 index 000000000..b5011fba5 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BA200G3T/4B2E23F452AA @@ -0,0 +1,362 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BA200G3T +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: 5DV1DL05 +User Capacity: 200,049,647,616 bytes [200 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 09:58:12 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 4294967295 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 43274 + 12 Power_Cycle_Count -O--CK 100 100 000 - 75 + 13 Read_Soft_Error_Rate -O--CK 130 100 000 - 4294967295 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 37360 +181 Program_Fail_Cnt_Total -O-RCK 100 100 --- - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 --- - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Internal -O---K 100 100 000 - 26 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 14 +201 Unknown_SSD_Attribute PO--CK 100 100 010 - 1082945241735 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 185 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 20 +228 Workload_Minutes -O--CK 100 100 000 - 160558 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 4593189 +245 Unknown_Attribute -O--CK 098 098 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xd1 GPL VS 13056 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +Device Error Count: 34 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 34 [33] occurred at disk power-on lifetime: 29071 hours (1211 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 10 00 00 17 49 ee 10 40 00 Error: ICRC, ABRT at LBA = 0x1749ee10 = 390721040 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 10 00 00 17 49 ee 10 40 00 00:12:28.508 READ FPDMA QUEUED + 60 00 00 00 10 00 00 00 40 0a 10 40 00 00:12:28.507 READ FPDMA QUEUED + 60 00 00 00 10 00 00 17 49 ec 10 40 00 00:12:28.507 READ FPDMA QUEUED + 61 00 00 00 40 00 00 06 00 dd 50 40 00 00:12:28.507 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 0c a7 86 80 40 00 00:12:28.507 WRITE FPDMA QUEUED + +Error 33 [32] occurred at disk power-on lifetime: 29071 hours (1211 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 40 00 00 09 63 fe b0 40 00 Error: ICRC, ABRT at LBA = 0x0963feb0 = 157548208 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 40 00 00 09 63 fe b0 40 00 00:12:28.448 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 08 00:12:28.447 FLUSH CACHE EXT + 06 00 01 00 01 00 00 00 00 00 00 40 08 00:12:28.447 DATA SET MANAGEMENT + 06 00 01 00 01 00 00 00 00 00 00 40 08 00:12:28.446 DATA SET MANAGEMENT + 61 00 00 00 40 00 00 0c a2 f0 98 40 00 00:12:28.445 WRITE FPDMA QUEUED + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 32 [31] occurred at disk power-on lifetime: 29071 hours (1211 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 40 00 00 06 00 dd 50 40 00 Error: ICRC, ABRT at LBA = 0x0600dd50 = 100719952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 40 00 00 06 00 dd 50 40 00 00:12:28.381 WRITE FPDMA QUEUED + 61 00 00 00 20 00 00 03 e1 4f 88 40 00 00:12:28.381 WRITE FPDMA QUEUED + 61 00 00 00 38 00 00 03 e1 4f 10 40 00 00:12:28.381 WRITE FPDMA QUEUED + 61 00 00 00 80 00 00 15 a1 75 80 40 00 00:12:28.381 WRITE FPDMA QUEUED + 61 00 00 00 b0 00 00 0e a3 63 b8 40 00 00:12:28.380 WRITE FPDMA QUEUED + +Error 31 [30] occurred at disk power-on lifetime: 29071 hours (1211 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 68 00 00 0e 93 6d b0 40 00 Error: ICRC, ABRT at LBA = 0x0e936db0 = 244542896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 68 00 00 0e 93 6d b0 40 00 00:05:34.930 READ FPDMA QUEUED + 60 00 00 00 10 00 00 17 49 ee 10 40 00 00:05:34.930 READ FPDMA QUEUED + 60 00 00 01 00 00 00 0d fd 1b 80 40 00 00:05:34.930 READ FPDMA QUEUED + 60 00 00 00 10 00 00 00 40 0a 10 40 00 00:05:34.928 READ FPDMA QUEUED + 60 00 00 00 10 00 00 17 49 ec 10 40 00 00:05:34.928 READ FPDMA QUEUED + +Error 30 [29] occurred at disk power-on lifetime: 29071 hours (1211 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 20 00 00 0c a0 ed 08 40 00 Error: ICRC, ABRT at LBA = 0x0ca0ed08 = 211873032 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 20 00 00 0c a0 ed 08 40 00 00:05:34.829 WRITE FPDMA QUEUED + 61 00 00 00 80 00 00 0c a0 ec 20 40 00 00:05:34.829 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 09 a0 f5 c8 40 00 00:05:34.829 WRITE FPDMA QUEUED + 61 00 00 00 28 00 00 09 a0 f5 a0 40 00 00:05:34.829 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 09 a0 f5 98 40 00 00:05:34.829 WRITE FPDMA QUEUED + +Error 29 [28] occurred at disk power-on lifetime: 29071 hours (1211 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 01 00 00 00 09 03 d4 20 40 00 Error: ICRC, ABRT at LBA = 0x0903d420 = 151245856 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 01 00 00 00 09 03 d4 20 40 00 00:05:34.727 WRITE FPDMA QUEUED + 61 00 00 00 10 00 00 06 00 b9 40 40 00 00:05:34.726 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 03 e1 4f e0 40 00 00:05:34.725 WRITE FPDMA QUEUED + 61 00 00 00 10 00 00 17 49 ec 10 40 00 00:05:34.725 WRITE FPDMA QUEUED + 61 00 00 00 10 00 00 17 49 ee 10 40 00 00:05:34.725 WRITE FPDMA QUEUED + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 28 [27] occurred at disk power-on lifetime: 29071 hours (1211 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 10 00 00 06 00 66 28 40 00 Error: ICRC, ABRT at LBA = 0x06006628 = 100689448 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 10 00 00 06 00 66 28 40 00 00:05:34.667 WRITE FPDMA QUEUED + 61 00 00 00 30 00 00 03 e1 4f 88 40 00 00:05:34.667 WRITE FPDMA QUEUED + 61 00 00 00 c0 00 00 03 e1 4e 88 40 00 00:05:34.667 WRITE FPDMA QUEUED + 61 00 00 00 58 00 00 03 e1 4e 28 40 00 00:05:34.667 WRITE FPDMA QUEUED + 61 00 00 00 50 00 00 03 e1 4d 40 40 00 00:05:34.667 WRITE FPDMA QUEUED + +Error 27 [26] occurred at disk power-on lifetime: 29071 hours (1211 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 40 00 00 11 84 35 f8 40 00 Error: ICRC, ABRT at LBA = 0x118435f8 = 293877240 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 40 00 00 11 84 35 f8 40 00 00:16:45.923 READ FPDMA QUEUED + 60 00 00 01 00 00 00 11 84 34 f8 40 00 00:16:45.923 READ FPDMA QUEUED + 60 00 00 00 c0 00 00 11 84 36 f8 40 00 00:16:45.923 READ FPDMA QUEUED + 60 00 00 01 00 00 00 11 84 33 f8 40 00 00:16:45.923 READ FPDMA QUEUED + 60 00 00 00 c0 00 00 11 84 32 78 40 00 00:16:45.922 READ FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2 - +# 2 Extended offline Completed without error 00% 1 - +# 3 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 16/38 Celsius +Lifetime Min/Max Temperature: 13/38 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (108) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 75 --- Lifetime Power-On Resets +0x01 0x018 6 301019240974 --- Logical Sectors Written +0x01 0x020 6 443508029 --- Number of Write Commands +0x01 0x028 6 46123509142 --- Logical Sectors Read +0x01 0x030 6 119479086 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 26 --- Highest Average Long Term Temperature +0x05 0x048 1 18 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 627 --- Number of Hardware Resets +0x06 0x010 4 306 --- Number of ASR Events +0x06 0x018 4 14 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BA200G3T/FDEFE99A1F99 b/SSD/Intel/SSDSC2/SSDSC2BA200G3T/FDEFE99A1F99 new file mode 100644 index 000000000..dc77bd9b6 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BA200G3T/FDEFE99A1F99 @@ -0,0 +1,362 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BA200G3T +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: 5DV1DL05 +User Capacity: 200,049,647,616 bytes [200 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 09:58:12 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 130 130 039 - 4294967295 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 46633 + 12 Power_Cycle_Count -O--CK 100 100 000 - 67 + 13 Read_Soft_Error_Rate -O--CK 130 100 000 - 4294967295 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 37361 +181 Program_Fail_Cnt_Total -O-RCK 100 100 --- - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 --- - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Internal -O---K 100 100 000 - 25 +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 13 +201 Unknown_SSD_Attribute PO--CK 100 100 010 - 1181729489512 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 194 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 20 +228 Workload_Minutes -O--CK 100 100 000 - 160558 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 4813183 +245 Unknown_Attribute -O--CK 098 098 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xd1 GPL VS 13056 Device vendor specific log +0xdf GPL VS 1152 Device vendor specific log +0xdf SL VS 128 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +Device Error Count: 32 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 32 [31] occurred at disk power-on lifetime: 32430 hours (1351 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 10 00 00 17 49 ee 10 40 00 Error: ICRC, ABRT at LBA = 0x1749ee10 = 390721040 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 10 00 00 17 49 ee 10 40 00 00:12:29.631 READ FPDMA QUEUED + 60 00 00 00 10 00 00 17 49 ec 10 40 00 00:12:29.630 READ FPDMA QUEUED + 61 00 00 00 18 00 00 09 6a 02 78 40 00 00:12:29.630 WRITE FPDMA QUEUED + 60 00 00 00 10 00 00 00 40 0a 10 40 00 00:12:29.630 READ FPDMA QUEUED + 61 00 00 00 d0 00 00 09 0e be 28 40 00 00:12:29.630 WRITE FPDMA QUEUED + +Error 31 [30] occurred at disk power-on lifetime: 32430 hours (1351 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 08 00 00 09 a3 40 18 40 00 Error: ICRC, ABRT at LBA = 0x09a34018 = 161693720 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 08 00 00 09 a3 40 18 40 00 00:12:29.554 WRITE FPDMA QUEUED + 61 00 00 00 10 00 00 09 06 cc 78 40 00 00:12:29.553 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 06 00 de b0 40 00 00:12:29.553 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 09 63 ff 30 40 00 00:12:29.553 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 08 00:12:29.553 FLUSH CACHE EXT + +Error 30 [29] occurred at disk power-on lifetime: 32430 hours (1351 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 40 00 00 09 63 fe b0 40 00 Error: ICRC, ABRT at LBA = 0x0963feb0 = 157548208 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 40 00 00 09 63 fe b0 40 00 00:12:29.495 WRITE FPDMA QUEUED + 61 00 00 00 10 00 00 00 40 0a 10 40 00 00:12:29.495 WRITE FPDMA QUEUED + ea 00 00 00 00 00 00 00 00 00 00 40 08 00:12:29.495 FLUSH CACHE EXT + 60 00 00 00 10 00 00 17 49 ee 10 40 00 00:12:29.495 READ FPDMA QUEUED + 60 00 00 00 10 00 00 17 49 ec 10 40 00 00:12:29.495 READ FPDMA QUEUED + +Error 29 [28] occurred at disk power-on lifetime: 32430 hours (1351 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 40 00 00 06 00 dd 50 40 00 Error: ICRC, ABRT at LBA = 0x0600dd50 = 100719952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 40 00 00 06 00 dd 50 40 00 00:12:29.392 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 0c a7 86 80 40 00 00:12:29.390 WRITE FPDMA QUEUED + 61 00 00 00 70 00 00 06 01 f1 e8 40 00 00:12:29.389 WRITE FPDMA QUEUED + 61 00 00 00 18 00 00 06 01 f1 00 40 00 00:12:29.389 WRITE FPDMA QUEUED + 61 00 00 00 10 00 00 17 49 ee 10 40 00 00:12:29.389 WRITE FPDMA QUEUED + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 28 [27] occurred at disk power-on lifetime: 32430 hours (1351 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 40 00 00 06 00 dd 50 40 00 Error: ICRC, ABRT at LBA = 0x0600dd50 = 100719952 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 40 00 00 06 00 dd 50 40 00 00:12:29.329 WRITE FPDMA QUEUED + 61 00 00 00 20 00 00 03 e1 4f 88 40 00 00:12:29.329 WRITE FPDMA QUEUED + 61 00 00 00 20 00 00 03 e1 4f 28 40 00 00:12:29.328 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 15 a1 75 c0 40 00 00:12:29.328 WRITE FPDMA QUEUED + 61 00 00 00 40 00 00 0e a3 64 28 40 00 00:12:29.328 WRITE FPDMA QUEUED + +Error 27 [26] occurred at disk power-on lifetime: 32429 hours (1351 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 51 00 40 00 00 0d 91 57 a0 40 00 Error: at LBA = 0x0d9157a0 = 227628960 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 40 00 00 0d 91 57 a0 40 00 00:05:34.799 READ FPDMA QUEUED + 60 00 00 00 10 00 00 17 49 ec 10 40 00 00:05:34.798 READ FPDMA QUEUED + 60 00 00 00 10 00 00 00 40 0a 10 40 00 00:05:34.797 READ FPDMA QUEUED + 60 00 00 00 10 00 00 17 49 ee 10 40 00 00:05:34.796 READ FPDMA QUEUED + 61 00 00 00 20 00 00 0c a0 ed 08 40 00 00:05:34.796 WRITE FPDMA QUEUED + +Error 26 [25] occurred at disk power-on lifetime: 32429 hours (1351 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 51 00 20 00 00 0c a0 ec 80 40 00 Error: at LBA = 0x0ca0ec80 = 211872896 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 00 00 00 20 00 00 0c a0 ec 80 40 00 00:05:34.698 WRITE FPDMA QUEUED + 06 00 01 00 01 00 00 00 00 00 00 40 08 00:05:34.691 DATA SET MANAGEMENT + 06 00 01 00 01 00 00 00 00 00 00 40 08 00:05:34.690 DATA SET MANAGEMENT + 61 00 00 00 30 00 00 09 03 d4 88 40 00 00:05:34.690 WRITE FPDMA QUEUED + 61 00 00 00 08 00 00 0e a0 8b 40 40 00 00:05:34.687 WRITE FPDMA QUEUED + +Error 25 [24] occurred at disk power-on lifetime: 32429 hours (1351 days + 5 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 41 00 10 00 00 17 49 ee 10 40 00 Error: ICRC, ABRT at LBA = 0x1749ee10 = 390721040 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 00 00 10 00 00 17 49 ee 10 40 00 00:16:42.574 READ FPDMA QUEUED + 60 00 00 00 10 00 00 17 49 ec 10 40 00 00:16:42.573 READ FPDMA QUEUED + 60 00 00 00 10 00 00 00 40 0a 10 40 00 00:16:42.573 READ FPDMA QUEUED + 61 00 00 00 08 00 00 09 66 34 20 40 00 00:16:42.572 WRITE FPDMA QUEUED + 61 00 00 00 30 00 00 09 66 33 e8 40 00 00:16:42.572 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 32430 - +# 2 Short offline Completed without error 00% 3 - +# 3 Extended offline Completed without error 00% 2 - +# 4 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: 16/38 Celsius +Lifetime Min/Max Temperature: 16/38 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (386) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 67 --- Lifetime Power-On Resets +0x01 0x018 6 315436801303 --- Logical Sectors Written +0x01 0x020 6 442744131 --- Number of Write Commands +0x01 0x028 6 47163242516 --- Logical Sectors Read +0x01 0x030 6 119934515 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 12 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 15 --- Lowest Average Short Term Temperature +0x05 0x040 1 26 --- Highest Average Long Term Temperature +0x05 0x048 1 17 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 661 --- Number of Hardware Resets +0x06 0x010 4 346 --- Number of ASR Events +0x06 0x018 4 13 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB080G4/595FD41A8ACE b/SSD/Intel/SSDSC2/SSDSC2BB080G4/595FD41A8ACE new file mode 100644 index 000000000..9d3eaca38 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB080G4/595FD41A8ACE @@ -0,0 +1,135 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB080G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010355 +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 12:29:48 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 099 099 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 25456 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1658 +170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 38 +175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 591 (39 82) +183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +190 Temperature_Case 0x0022 052 052 000 Old_age Always - 48 (Min/Max 16/48) +192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 38 +194 Temperature_Internal 0x0022 100 100 000 Old_age Always - 48 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 398048 +226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 0 +227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 28 +228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 82 +232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 094 094 000 Old_age Always - 0 +234 Thermal_Throttle 0x0032 100 100 000 Old_age Always - 0/0 +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 398048 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 52089 + +SMART Error Log Version: 1 +ATA Error Count: 1 + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 occurred at disk power-on lifetime: 22413 hours (933 days + 21 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + c0 01 80 a0 eb f9 66 Error: WP at LBA = 0x06f9eba0 = 117042080 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 30 00 80 a0 eb f9 66 08 00:08:01.875 WRITE SECTOR(S) + 30 00 80 20 eb f9 66 08 00:08:01.869 WRITE SECTOR(S) + 30 00 80 a0 ea f9 66 08 00:08:01.846 WRITE SECTOR(S) + 30 00 80 20 ea f9 66 08 00:08:01.823 WRITE SECTOR(S) + 30 00 04 fc 85 e1 66 08 00:08:01.799 WRITE SECTOR(S) + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Intel/SSDSC2/SSDSC2BB120G4/E7DD27B01C36 b/SSD/Intel/SSDSC2/SSDSC2BB120G4/E7DD27B01C36 new file mode 100644 index 000000000..cd953a6a2 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BB120G4/E7DD27B01C36 @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BB120G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: D2010380 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 12:02:30 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x33) Offline data collection activity + is in a Reserved state. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 3) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (13107) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9918 + 12 Power_Cycle_Count -O--CK 100 100 000 - 139 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 89 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 651 (48 7011) +183 SATA_Downshift_Count -O--CK 100 100 000 - 1 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Temperature_Case -O---K 066 066 000 - 34 (Min/Max 31/42) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 89 +194 Temperature_Internal -O---K 100 100 000 - 41 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 88570 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 099 099 000 - 0 +234 Thermal_Throttle -O--CK 100 100 000 - 0/0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 88570 +242 Host_Reads_32MiB -O--CK 100 100 000 - 2671902 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 8 Comprehensive SMART error log +0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb0 GPL,SL VS 1 Device vendor specific log +0xb1 GPL,SL VS 33 Device vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 768 Device vendor specific log +0xba GPL VS 1152 Device vendor specific log +0xba SL VS 128 Device vendor specific log +0xcf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 31/42 Celsius +Lifetime Min/Max Temperature: 13/42 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 5d 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (203) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 139 --- Lifetime Power-On Resets +0x01 0x018 6 5804551209 --- Logical Sectors Written +0x01 0x020 6 112230128 --- Number of Write Commands +0x01 0x028 6 175105770683 --- Logical Sectors Read +0x01 0x030 6 231865925 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 34 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 650 --- Number of Hardware Resets +0x06 0x010 4 378 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x000a 4 30 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BF120A5/9DC9944515D8 b/SSD/Intel/SSDSC2/SSDSC2BF120A5/9DC9944515D8 new file mode 100644 index 000000000..eb2d00d4d --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BF120A5/9DC9944515D8 @@ -0,0 +1,203 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BF120A5 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: TG20 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 10:31:09 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2930) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 47062h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 65 +170 Available_Reservd_Space PO--CK 096 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 11 +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 030 100 000 - 30 (Min/Max 12/38) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 11 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 99289 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 72 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 096 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 087 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 99289 +242 Host_Reads_32MiB -O--CK 100 100 000 - 262001 +249 NAND_Writes_1GiB -O--CK 100 100 000 - 27339 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 12/38 Celsius +Lifetime Min/Max Temperature: 12/75 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (378) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 65 --- Lifetime Power-On Resets +0x01 0x010 4 47062 --- Power-on Hours +0x01 0x018 6 6507026152 --- Logical Sectors Written +0x01 0x020 6 204042298 --- Number of Write Commands +0x01 0x028 6 17170559835 --- Logical Sectors Read +0x01 0x030 6 199656665 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 30 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 443 --- Number of Hardware Resets +0x06 0x010 4 22 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 18 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BF180A4L/A70C1A0A6BB4 b/SSD/Intel/SSDSC2/SSDSC2BF180A4L/A70C1A0A6BB4 new file mode 100644 index 000000000..692c46c81 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BF180A4L/A70C1A0A6BB4 @@ -0,0 +1,218 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSC2BF180A4L +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LADi +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 20:21:35 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 2 + 9 Power_On_Hours -O--CK 100 100 000 - 11333 (208 94 0) + 12 Power_Cycle_Count -O--CK 099 099 000 - 1157 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 1 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 26 +183 Runtime_Bad_Block -O--CK 100 100 000 - 8 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 029 045 000 - 29 (Min/Max 14/45) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 26 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Unknown_SSD_Attribute -O--CK 100 100 000 - 248737 +226 Unknown_SSD_Attribute -O--CK 100 100 000 - 65535 +227 Unknown_SSD_Attribute -O--CK 100 100 000 - 69 +228 Power-off_Retract_Count -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 086 086 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 248737 +242 Total_LBAs_Read -O--CK 100 100 000 - 507643 +249 Unknown_Attribute -O--CK 100 100 000 - 78535 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 11333 - +# 2 Offline Interrupted (host reset) 10% 11329 - +# 3 Offline Interrupted (host reset) 10% 11326 - +# 4 Offline Interrupted (host reset) 10% 11318 - +# 5 Offline Interrupted (host reset) 10% 11318 - +# 6 Offline Interrupted (host reset) 10% 11318 - +# 7 Offline Interrupted (host reset) 10% 11318 - +# 8 Offline Interrupted (host reset) 10% 11318 - +# 9 Offline Interrupted (host reset) 10% 11317 - +#10 Offline Interrupted (host reset) 10% 11311 - +#11 Offline Interrupted (host reset) 10% 11303 - +#12 Offline Interrupted (host reset) 10% 11288 - +#13 Offline Interrupted (host reset) 10% 11284 - +#14 Offline Interrupted (host reset) 10% 11284 - +#15 Offline Interrupted (host reset) 10% 11284 - +#16 Offline Interrupted (host reset) 10% 11284 - +#17 Offline Interrupted (host reset) 10% 11283 - +#18 Offline Interrupted (host reset) 10% 11283 - +#19 Offline Interrupted (host reset) 10% 11283 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 14/45 Celsius +Lifetime Min/Max Temperature: 14/76 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (406) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1162 --- Lifetime Power-On Resets +0x01 0x010 4 11339 --- Power-on Hours +0x01 0x018 6 16494374004 --- Logical Sectors Written +0x01 0x028 6 33450085318 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3319 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 36 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3319 --- Number of Hardware Resets +0x06 0x010 4 519 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 16 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BF180A4L/D325BDBB71AF b/SSD/Intel/SSDSC2/SSDSC2BF180A4L/D325BDBB71AF new file mode 100644 index 000000000..658e8828d --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BF180A4L/D325BDBB71AF @@ -0,0 +1,218 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSC2BF180A4L +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LADi +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 14:34:01 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 14366 (225 118 0) + 12 Power_Cycle_Count -O--CK 100 100 000 - 280 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 32 +183 Runtime_Bad_Block -O--CK 100 100 000 - 16 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 023 054 000 - 23 (Min/Max 10/54) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 32 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +225 Unknown_SSD_Attribute -O--CK 100 100 000 - 427080 +226 Unknown_SSD_Attribute -O--CK 100 100 000 - 65535 +227 Unknown_SSD_Attribute -O--CK 100 100 000 - 15 +228 Power-off_Retract_Count -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 090 090 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 427080 +242 Total_LBAs_Read -O--CK 100 100 000 - 78193 +249 Unknown_Attribute -O--CK 100 100 000 - 57341 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Interrupted (host reset) 10% 14080 - +# 2 Offline Interrupted (host reset) 10% 13988 - +# 3 Offline Interrupted (host reset) 10% 13937 - +# 4 Offline Interrupted (host reset) 10% 13933 - +# 5 Offline Interrupted (host reset) 10% 12923 - +# 6 Offline Interrupted (host reset) 10% 12922 - +# 7 Offline Interrupted (host reset) 10% 12922 - +# 8 Offline Interrupted (host reset) 10% 8976 - +# 9 Offline Interrupted (host reset) 10% 8902 - +#10 Offline Interrupted (host reset) 10% 8889 - +#11 Offline Interrupted (host reset) 10% 8214 - +#12 Offline Interrupted (host reset) 10% 7088 - +#13 Offline Interrupted (host reset) 10% 6778 - +#14 Offline Interrupted (host reset) 10% 6506 - +#15 Offline Interrupted (host reset) 10% 2425 - +#16 Offline Interrupted (host reset) 10% 2425 - +#17 Offline Interrupted (host reset) 10% 2425 - +#18 Offline Interrupted (host reset) 10% 2425 - +#19 Offline Interrupted (host reset) 10% 2425 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 23 Celsius +Power Cycle Min/Max Temperature: 10/54 Celsius +Lifetime Min/Max Temperature: 10/78 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (345) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 286 --- Lifetime Power-On Resets +0x01 0x010 4 14371 --- Power-on Hours +0x01 0x018 6 28182240176 --- Logical Sectors Written +0x01 0x028 6 5305649000 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2173 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 23 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 31 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2173 --- Number of Hardware Resets +0x06 0x010 4 279 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 12 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 18 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2BF180A5H REF/BBECD3464296 b/SSD/Intel/SSDSC2/SSDSC2BF180A5H REF/BBECD3464296 new file mode 100644 index 000000000..3124959b9 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BF180A5H REF/BBECD3464296 @@ -0,0 +1,207 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSC2BF180A5H REF +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LWDi +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 12 00:05:38 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x73) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 120 100 002 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 329 + 12 Power_Cycle_Count -O--CK 100 100 000 - 464 +170 Unknown_Attribute PO--CK 100 100 010 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute PO--CK 095 100 005 - 5131248 +174 Unknown_Attribute -O--CK 100 100 000 - 30 +183 Runtime_Bad_Block -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 1 +190 Airflow_Temperature_Cel -O--CK 036 100 000 - 36 (Min/Max 17/50) +192 Power-Off_Retract_Count -O--CK 100 100 000 - 30 +194 Temperature_Celsius -O--CK 036 100 000 - 36 (Min/Max 17/50) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 8 +225 Unknown_SSD_Attribute -O--CK 100 100 000 - 54060 +226 Unknown_SSD_Attribute -O--CK 100 100 000 - 65535 +227 Unknown_SSD_Attribute -O--CK 100 100 000 - 53 +228 Power-off_Retract_Count -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 097 100 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 54060 +242 Total_LBAs_Read -O--CK 100 100 000 - 57599 +249 Unknown_Attribute -O--CK 100 100 000 - 17894 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 329 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 17/50 Celsius +Lifetime Min/Max Temperature: 17/73 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/75 Celsius +Temperature History Size (Index): 478 (307) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 464 --- Lifetime Power-On Resets +0x01 0x010 4 329 --- Power-on Hours +0x01 0x018 6 3542884072 --- Logical Sectors Written +0x01 0x020 6 92283721 --- Number of Write Commands +0x01 0x028 6 3774845141 --- Logical Sectors Read +0x01 0x030 6 348399935 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 35 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1914 --- Number of Hardware Resets +0x06 0x010 4 544 --- Number of ASR Events +0x06 0x018 4 8 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2BP240G4/C3B2B76FA68D b/SSD/Intel/SSDSC2/SSDSC2BP240G4/C3B2B76FA68D new file mode 100644 index 000000000..589a11d4c --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BP240G4/C3B2B76FA68D @@ -0,0 +1,105 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs +Device Model: INTEL SSDSC2BP240G4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: L2010420 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 14:46:59 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 096 096 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 20046 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1012 +170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 134 +175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 646 (85 1686) +183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +190 Temperature_Case 0x0022 057 057 000 Old_age Always - 43 (Min/Max 31/45) +192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 134 +194 Temperature_Internal 0x0022 100 100 000 Old_age Always - 43 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 312399 +226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 133 +227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 7 +228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 213362 +232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 098 098 000 Old_age Always - 0 +234 Thermal_Throttle 0x0032 100 100 000 Old_age Always - 0/0 +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 312399 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 270151 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Intel/SSDSC2/SSDSC2BW240H6/BE5607EDB9FB b/SSD/Intel/SSDSC2/SSDSC2BW240H6/BE5607EDB9FB new file mode 100644 index 000000000..d308e2422 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2BW240H6/BE5607EDB9FB @@ -0,0 +1,100 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 53x and Pro 1500/2500 Series SSDs +Device Model: INTEL SSDSC2BW240H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: RG21 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 22:00:37 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5860) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always - 4516h+00m+00.000s + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4246 +170 Available_Reservd_Space 0x0033 091 100 010 Pre-fail Always - 0 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 16 +183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 026 100 000 Old_age Always - 26 (Min/Max 15/38) +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 16 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 13 +225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 406356 +226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 65535 +227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 62 +228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 65535 +232 Available_Reservd_Space 0x0033 091 100 010 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 073 100 000 Old_age Always - 0 +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 406356 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 672428 +249 NAND_Writes_1GiB 0x0032 100 100 000 Old_age Always - 105988 + +SMART Error Log not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2CT080A4/2670BDE5DED6 b/SSD/Intel/SSDSC2/SSDSC2CT080A4/2670BDE5DED6 new file mode 100644 index 000000000..4e782dac3 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CT080A4/2670BDE5DED6 @@ -0,0 +1,173 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSC2CT080A4 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 335u +User Capacity: 80,026,361,856 bytes [80.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Jul 25 00:55:52 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1953) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 47141 (43 20 0) + 12 Power_Cycle_Count -O--CK 100 100 000 - 358 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 170 +225 Unknown_SSD_Attribute -O--CK 100 100 000 - 1078460 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 097 097 000 - 0 +241 Total_LBAs_Written -O--CK 100 100 000 - 1078460 +242 Total_LBAs_Read -O--CK 100 100 000 - 392070 +249 Unknown_Attribute PO--C- 100 100 000 - 16452 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (0) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 366 --- Lifetime Power-On Resets +0x01 0x010 4 47145 --- Power-on Hours +0x01 0x018 6 70868462295 --- Logical Sectors Written +0x01 0x028 6 25868256158 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 13672 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 13672 --- Number of Hardware Resets +0x06 0x010 4 5521 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 20 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CT180A3/14583978D656 b/SSD/Intel/SSDSC2/SSDSC2CT180A3/14583978D656 new file mode 100644 index 000000000..cf326f762 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CT180A3/14583978D656 @@ -0,0 +1,177 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 330/335 Series SSDs +Device Model: INTEL SSDSC2CT180A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 300i +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 15 17:43:05 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 927239h+34m+20.670s + 12 Power_Cycle_Count -O--CK 097 097 000 - 3645 +181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 0 +182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 3355 +225 Host_Writes_32MiB -O--CK 100 100 000 - 501446 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 501446 +242 Host_Reads_32MiB -O--CK 100 100 000 - 439251 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 14437 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (362) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 3651 --- Lifetime Power-On Resets +0x01 0x010 4 32445 --- Power-on Hours +0x01 0x018 6 33067136744 --- Logical Sectors Written +0x01 0x028 6 28971462672 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 17590 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 17590 --- Number of Hardware Resets +0x06 0x010 4 4294 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 27 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 28 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2CT180A3/F198E4676CAA b/SSD/Intel/SSDSC2/SSDSC2CT180A3/F198E4676CAA new file mode 100644 index 000000000..55b4734ff --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CT180A3/F198E4676CAA @@ -0,0 +1,177 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 330/335 Series SSDs +Device Model: INTEL SSDSC2CT180A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 300i +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 1 06:54:21 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 958967h+24m+07.050s + 12 Power_Cycle_Count -O--CK 100 100 000 - 574 +181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 0 +182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 330 +225 Host_Writes_32MiB -O--CK 100 100 000 - 2029828 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 2029828 +242 Host_Reads_32MiB -O--CK 100 100 000 - 3748714 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 32261 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (11) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 581 --- Lifetime Power-On Resets +0x01 0x010 4 64173 --- Power-on Hours +0x01 0x018 6 133231137293 --- Logical Sectors Written +0x01 0x028 6 245860472912 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 11123 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 11123 --- Number of Hardware Resets +0x06 0x010 4 7542 --- Number of ASR Events +0x06 0x018 4 11 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2CT240A3/9296A24F7E2B b/SSD/Intel/SSDSC2/SSDSC2CT240A3/9296A24F7E2B new file mode 100644 index 000000000..6990659f7 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CT240A3/9296A24F7E2B @@ -0,0 +1,194 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 330/335 Series SSDs +Device Model: INTEL SSDSC2CT240A3 +Serial Number: -- +LU WWN Device Id: 5 001517 ... +Firmware Version: 300i +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 10:20:53 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 7 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 951675h+04m+28.810s + 12 Power_Cycle_Count -O--CK 100 100 000 - 839 +181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 7 +182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 821 +225 Host_Writes_32MiB -O--CK 100 100 000 - 1685578 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 1685578 +242 Host_Reads_32MiB -O--CK 100 100 000 - 168643 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 39676 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Self-test routine in progress 90% 43734 - +# 2 Extended offline Self-test routine in progress 90% 43733 - +# 3 Extended offline Self-test routine in progress 90% 43733 - +# 4 Extended offline Self-test routine in progress 90% 43733 - +# 5 Extended offline Self-test routine in progress 80% 43733 - +# 6 Extended offline Self-test routine in progress 80% 43733 - +# 7 Extended offline Self-test routine in progress 80% 43733 - +# 8 Extended offline Self-test routine in progress 80% 43733 - +# 9 Extended offline Self-test routine in progress 80% 43733 - +#10 Extended offline Self-test routine in progress 80% 43733 - +#11 Extended offline Self-test routine in progress 80% 43733 - +#12 Extended offline Self-test routine in progress 80% 43733 - +#13 Extended offline Self-test routine in progress 80% 43733 - +#14 Extended offline Self-test routine in progress 80% 43733 - +#15 Extended offline Self-test routine in progress 80% 43733 - +#16 Extended offline Self-test routine in progress 80% 43733 - +#17 Extended offline Self-test routine in progress 80% 43733 - +#18 Extended offline Self-test routine in progress 70% 43732 - +#19 Extended offline Self-test routine in progress 90% 43734 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 10 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/ 6 Celsius +Temperature History Size (Index): 25700 (75) +Invalid Temperature History Size or Index + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 846 --- Lifetime Power-On Resets +0x01 0x010 4 56881 --- Power-on Hours +0x01 0x018 6 110673522426 --- Logical Sectors Written +0x01 0x028 6 11236977012 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 5863 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5863 --- Number of Hardware Resets +0x06 0x010 4 2981 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Intel/SSDSC2/SSDSC2CW060A3/C8C7E259545D b/SSD/Intel/SSDSC2/SSDSC2CW060A3/C8C7E259545D new file mode 100644 index 000000000..783bf15cc --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CW060A3/C8C7E259545D @@ -0,0 +1,184 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2CW060A3 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 400i +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 23:19:52 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 958356h+29m+35.020s + 12 Power_Cycle_Count -O--CK 100 100 000 - 92 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 92 +184 End-to-End_Error PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt POSR-- 109 109 050 - 26126599 +192 Power-Off_Retract_Count -O--CK 100 100 000 - 92 +225 Host_Writes_32MiB -O--CK 100 100 000 - 141990 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 23 +228 Workload_Minutes -O--CK 100 100 000 - 65535 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +241 Host_Writes_32MiB -O--CK 100 100 000 - 141990 +242 Host_Reads_32MiB -O--CK 100 100 000 - 42829 +249 NAND_Writes_1GiB PO--C- 100 100 000 - 9160 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (0) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 98 --- Lifetime Power-On Resets +0x01 0x010 4 63562 --- Power-on Hours +0x01 0x018 6 9452995000 --- Logical Sectors Written +0x01 0x028 6 2940987396 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1658 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1658 --- Number of Hardware Resets +0x06 0x010 4 1308 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 255 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2CW120A3/9DB303E94AFE b/SSD/Intel/SSDSC2/SSDSC2CW120A3/9DB303E94AFE new file mode 100644 index 000000000..6bdd195c5 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2CW120A3/9DB303E94AFE @@ -0,0 +1,93 @@ +smartctl 7.0 2018-12-30 r4883 [NetBSD 8.99.51 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 520 Series SSDs +Device Model: INTEL SSDSC2CW120A3 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: 400i +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Aug 19 16:17:20 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours_and_Msec 0x0032 000 000 000 Old_age Always - 924445h+28m+30.540s + 12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4448 +170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 2752 +184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x000f 116 116 050 Pre-fail Always - 127730183 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2752 +225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 426109 +226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 65535 +227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 43 +228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 65535 +232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 426109 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 331058 +249 NAND_Writes_1GiB 0x0013 100 100 000 Pre-fail Always - 15219 + +SMART Error Log not supported + +SMART Self-test Log not supported + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480G8/0E9ED257DA1F b/SSD/Intel/SSDSC2/SSDSC2KG480G8/0E9ED257DA1F new file mode 100644 index 000000000..c435fddd1 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480G8/0E9ED257DA1F @@ -0,0 +1,217 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KG480G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10110 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 24 01:59:59 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2199 + 12 Power_Cycle_Count -O--CK 100 100 000 - 54 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 52 +175 Power_Loss_Cap_Test PO--CK 100 100 010 - 2451 (54 65535) +183 SATA_Downshift_Count -O--CK 100 100 000 - 0 +184 End-to-End_Error_Count PO--CK 100 100 090 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Drive_Temperature -O---K 077 076 000 - 23 (Min/Max 18/28) +192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 52 +194 Temperature_Celsius -O---K 100 100 000 - 23 +197 Pending_Sector_Count -O--C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +225 Host_Writes_32MiB -O--CK 100 100 000 - 42584 +226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 40 +227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 28 +228 Workload_Minutes -O--CK 100 100 000 - 131834 +232 Available_Reservd_Space PO--CK 100 100 010 - 0 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Power_Loss_Cap_Test PO--CK 100 100 010 - 2451 (54 65535) +241 Host_Writes_32MiB -O--CK 100 100 000 - 42584 +242 Host_Reads_32MiB -O--CK 100 100 000 - 16761 +243 NAND_Writes_32MiB -O--CK 100 100 000 - 86049 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb8 GPL,SL VS 1 Device vendor specific log +0xb9 GPL VS 3336 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 23 Celsius +Power Cycle Min/Max Temperature: 18/28 Celsius +Lifetime Min/Max Temperature: 10/33 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (61) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 54 --- Lifetime Power-On Resets +0x01 0x018 6 2790823848 --- Logical Sectors Written +0x01 0x020 6 46294560 --- Number of Write Commands +0x01 0x028 6 1098478850 --- Logical Sectors Read +0x01 0x030 6 16527983 --- Number of Read Commands +0x01 0x038 6 3621589722 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 23 --- Current Temperature +0x05 0x010 1 23 --- Average Short Term Temperature +0x05 0x018 1 22 --- Average Long Term Temperature +0x05 0x020 1 28 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 25 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 23 --- Highest Average Long Term Temperature +0x05 0x048 1 22 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 326 --- Number of Hardware Resets +0x06 0x010 4 222 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480G8/1095FB4D46A1 b/SSD/Intel/SSDSC2/SSDSC2KG480G8/1095FB4D46A1 new file mode 100644 index 000000000..6648dd08f --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480G8/1095FB4D46A1 @@ -0,0 +1,107 @@ +smartctl 7.1 2019-12-30 r5022 [MidnightBSD 1.2.7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KG480G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10120 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 27 17:13:26 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1498 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5 +170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 4 +175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2482 (5 65535) +183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Drive_Temperature 0x0022 072 068 000 Old_age Always - 28 (Min/Max 23/32) +192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 4 +194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 28 +197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 198812 +226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 122 +227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 30 +228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 89877 +232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 +234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 +235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2482 (5 65535) +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 198812 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 85498 +243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 261281 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480G8/2EE49B252EBE b/SSD/Intel/SSDSC2/SSDSC2KG480G8/2EE49B252EBE new file mode 100644 index 000000000..8f3510863 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480G8/2EE49B252EBE @@ -0,0 +1,107 @@ +smartctl 7.1 2019-12-30 r5022 [MidnightBSD 1.2.7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs +Device Model: INTEL SSDSC2KG480G8 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: XCV10120 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 27 17:13:26 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1403 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4 +170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 4 +175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2533 (4 65535) +183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Drive_Temperature 0x0022 071 068 000 Old_age Always - 29 (Min/Max 24/33) +192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 4 +194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 29 +197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 150283 +226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 92 +227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 30 +228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 84222 +232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 +234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 +235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2533 (4 65535) +241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 150283 +242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 65978 +243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 201507 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480G8R/41A8533CE536 b/SSD/Intel/SSDSC2/SSDSC2KG480G8R/41A8533CE536 new file mode 100644 index 000000000..e5e0d85a2 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480G8R/41A8533CE536 @@ -0,0 +1,212 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Dell Certified Intel S4x00/D3-S4x10 Series SSDs +Device Model: SSDSC2KG480G8R +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: XCV1DL67 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 07:45:01 2020 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 72) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -OSR-- 130 130 039 - 5129441 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2542 + 12 Power_Cycle_Count -O--CK 100 100 000 - 26 + 13 Read_Soft_Error_Rate -OSRC- 093 093 000 - 279178003681 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +173 Unknown_Attribute -O--C- 100 100 000 - 3 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 22 +175 Program_Fail_Count_Chip -O--C- 100 100 010 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 6119 +181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 24 +195 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +201 Power_Loss_Cap_Test PO--CK 100 100 010 - 2567 (30 65535) +202 End_of_Life POS--K 100 100 000 - 0 +233 Total_LBAs_Written -O--CK 100 100 000 - 758 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Unknown_Attribute PO-R-- 100 100 000 - 758 +241 Total_LBAs_Written -O--CK 100 100 000 - 758 +242 Total_LBAs_Read -O--CK 100 100 000 - 14670 +245 Percent_Life_Remaining -O--CK 100 100 000 - 100 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x99-0x9a GPL,SL R/W 1 Host vendor specific log +0xb8 SL VS 1 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xc8 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 1 - +# 2 Short offline Completed without error 00% 1 - + +Read SMART Selective Self-test Log failed: SAT command failed + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: 22/27 Celsius +Lifetime Min/Max Temperature: 10/28 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (392) + +SMART WRITE LOG does not return COUNT and LBA_LOW register +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x018 6 49720007 --- Logical Sectors Written +0x01 0x020 6 11765174 --- Number of Write Commands +0x01 0x028 6 961449927 --- Logical Sectors Read +0x01 0x030 6 13324315 --- Number of Read Commands +0x01 0x038 6 564783680 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 24 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 23 --- Average Long Term Temperature +0x05 0x020 1 27 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 25 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 23 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KG480G8R/B3E13B764123 b/SSD/Intel/SSDSC2/SSDSC2KG480G8R/B3E13B764123 new file mode 100644 index 000000000..af07b20d0 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KG480G8R/B3E13B764123 @@ -0,0 +1,212 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Dell Certified Intel S4x00/D3-S4x10 Series SSDs +Device Model: SSDSC2KG480G8R +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Add. Product Id: DELL(tm) +Firmware Version: XCV1DL67 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 07:45:01 2020 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Unavailable +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 72) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. +Conveyance self-test routine +recommended polling time: ( 60) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -OSR-- 130 130 039 - 5676983 + 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2542 + 12 Power_Cycle_Count -O--CK 100 100 000 - 26 + 13 Read_Soft_Error_Rate -OSRC- 093 093 000 - 476747046839 +170 Available_Reservd_Space PO--CK 100 100 010 - 0 +173 Unknown_Attribute -O--C- 100 100 000 - 3 +174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 22 +175 Program_Fail_Count_Chip -O--C- 100 100 010 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 6098 +181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 +184 End-to-End_Error -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 100 100 000 - 26 +195 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +198 Offline_Uncorrectable ----C- 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +201 Power_Loss_Cap_Test PO--CK 100 100 010 - 2623 (30 65535) +202 End_of_Life POS--K 100 100 000 - 0 +233 Total_LBAs_Written -O--CK 100 100 000 - 797 +234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 +235 Unknown_Attribute PO-R-- 100 100 000 - 797 +241 Total_LBAs_Written -O--CK 100 100 000 - 797 +242 Total_LBAs_Read -O--CK 100 100 000 - 14785 +245 Percent_Life_Remaining -O--CK 100 100 000 - 100 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x02 SL R/O 8 Comprehensive SMART error log +0x03 GPL R/O 20 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x08 GPL R/O 2 Power Conditions log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 512 Current Device Internal Status Data log +0x25 GPL R/O 512 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x99-0x9a GPL,SL R/W 1 Host vendor specific log +0xb8 SL VS 1 Device vendor specific log +0xb9 SL VS 8 Device vendor specific log +0xba GPL VS 1280 Device vendor specific log +0xc8 GPL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 8 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (20 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 1 - +# 2 Short offline Completed without error 00% 1 - + +Read SMART Selective Self-test Log failed: SAT command failed + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 25/29 Celsius +Lifetime Min/Max Temperature: 10/30 Celsius +Specified Max Operating Temperature: 73 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/73 Celsius +Min/Max Temperature Limit: 0/73 Celsius +Temperature History Size (Index): 478 (392) + +SMART WRITE LOG does not return COUNT and LBA_LOW register +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x018 6 52280226 --- Logical Sectors Written +0x01 0x020 6 9368586 --- Number of Write Commands +0x01 0x028 6 968952591 --- Logical Sectors Read +0x01 0x030 6 11556831 --- Number of Read Commands +0x01 0x038 6 564559259 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 26 --- Average Short Term Temperature +0x05 0x018 1 25 --- Average Long Term Temperature +0x05 0x020 1 30 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 27 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 26 --- Highest Average Long Term Temperature +0x05 0x048 1 25 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 73 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 4 0 R_ERR response for device-to-host data FIS +0x0004 4 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 4 0 R_ERR response for device-to-host non-data FIS +0x0007 4 0 R_ERR response for host-to-device non-data FIS +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Intel/SSDSC2/SSDSC2KW120H6/F1E069764BE1 b/SSD/Intel/SSDSC2/SSDSC2KW120H6/F1E069764BE1 new file mode 100644 index 000000000..73fb1a197 --- /dev/null +++ b/SSD/Intel/SSDSC2/SSDSC2KW120H6/F1E069764BE1 @@ -0,0 +1,100 @@ +smartctl 7.0 2018-12-30 r4883 [NetBSD 9.1 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Intel 540 Series SSDs +Device Model: INTEL SSDSC2KW120H6 +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LSBG200 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 22 09:40:40 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x01) Offline data collection activity + is in a Reserved state. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 25 + 9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always - 61h+00m+00.000s + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 566 +170 Available_Reservd_Space 0x0033 099 099 010 Pre-fail Always - 0 +171 Program_Fail_Count 0x0032 100 100 010 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 010 Old_age Always - 0 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 79 +183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 4 +190 Airflow_Temperature_Cel 0x0032 034 047 000 Old_age Always - 34 (Min/Max 24/47) +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 79 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 48396 +226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 0 +227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 0 +228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 0 +232 Available_Reservd_Space 0x0033 090 090 010 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 098 098 000 Old_age Always - 0 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 48396 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 46633 +249 NAND_Writes_1GiB 0x0032 100 100 000 Old_age Always - 1196 +252 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 18 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 70403103932424 70403103932424 Not_testing + 2 70403103932424 70403103932424 Not_testing + 3 70403103932424 70403103932424 Not_testing + 4 70403103932424 70403103932424 Not_testing + 5 70403103932424 70403103932424 Not_testing +Selective self-test flags (0x4008): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Intel/SSDSCKGF180/SSDSCKGF180A4L/5163461B5BA4 b/SSD/Intel/SSDSCKGF180/SSDSCKGF180A4L/5163461B5BA4 new file mode 100644 index 000000000..2fc1fcb1d --- /dev/null +++ b/SSD/Intel/SSDSCKGF180/SSDSCKGF180A4L/5163461B5BA4 @@ -0,0 +1,100 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: INTEL SSDSCKGF180A4L +Serial Number: -- +LU WWN Device Id: 5 5cd2e4 ... +Firmware Version: LSTi +User Capacity: 180,045,766,656 bytes [180 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 15:47:41 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4395) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 58) minutes. +Conveyance self-test routine +recommended polling time: ( 4) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3668 (166 120 0) + 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2729 +170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 17 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 2 +184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 041 063 000 Old_age Always - 41 (Min/Max 8/63) +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 17 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 539143 +226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 65535 +227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 24 +228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 65535 +232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 098 098 000 Old_age Always - 0 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 539143 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 170916 +249 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 25524 + +SMART Error Log not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8 - +# 2 Short offline Completed without error 00% 8 - +# 3 Short offline Completed without error 00% 4 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/90B4CF80C489 b/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/90B4CF80C489 new file mode 100644 index 000000000..220dfbe82 --- /dev/null +++ b/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/90B4CF80C489 @@ -0,0 +1,202 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Intenso SSD Sata III +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: Q0303B +User Capacity: 126,701,535,232 bytes [126 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 3 13:21:27 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 15 + 9 Power_On_Hours ------ 100 100 000 - 18 + 12 Power_Cycle_Count ------ 100 100 000 - 28 +160 Unknown_Attribute ------ 100 100 000 - 4 +161 Unknown_Attribute ------ 100 100 000 - 157 +163 Unknown_Attribute ------ 100 100 000 - 26 +164 Unknown_Attribute ------ 100 100 000 - 32646 +165 Unknown_Attribute ------ 100 100 000 - 39 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 15 +168 Unknown_Attribute ------ 100 100 000 - 3000 +169 Unknown_Attribute ------ 100 100 000 - 100 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 8 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 6 +194 Temperature_Celsius ------ 100 100 000 - 42 +195 Hardware_ECC_Recovered ------ 100 100 000 - 668216 +196 Reallocated_Event_Count ------ 100 100 016 - 16 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 16 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 95 +241 Total_LBAs_Written ------ 100 100 000 - 16950 +242 Total_LBAs_Read ------ 100 100 000 - 11101 +245 Unknown_Attribute ------ 100 100 000 - 65292 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: 38/42 Celsius +Lifetime Min/Max Temperature: 0/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (44) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 18 --- Power-on Hours +0x01 0x018 6 1110859553 --- Logical Sectors Written +0x01 0x020 6 13570598 --- Number of Write Commands +0x01 0x028 6 727563120 --- Logical Sectors Read +0x01 0x030 6 5778829 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 16 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 241 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/C4BFD7CBB0A7 b/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/C4BFD7CBB0A7 new file mode 100644 index 000000000..0ca833621 --- /dev/null +++ b/SSD/Intenso/SSD Sata III/SSD Sata III 128GB/C4BFD7CBB0A7 @@ -0,0 +1,162 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Intenso SSD Sata III +Serial Number: -- +Firmware Version: N1126K +User Capacity: 125,090,922,496 bytes [125 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 28 16:15:03 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 365 + 12 Power_Cycle_Count ------ 100 100 000 - 3226 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 84 +163 Unknown_Attribute ------ 100 100 000 - 19 +164 Unknown_Attribute ------ 100 100 000 - 84292 +165 Unknown_Attribute ------ 100 100 000 - 136 +166 Unknown_Attribute ------ 100 100 000 - 35 +167 Unknown_Attribute ------ 100 100 000 - 81 +168 Unknown_Attribute ------ 100 100 000 - 3000 +169 Unknown_Attribute ------ 100 100 000 - 98 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 17 +178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 989 +194 Temperature_Celsius ------ 100 100 000 - 33 +195 Hardware_ECC_Recovered ------ 100 100 000 - 2758 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 6682 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Total_LBAs_Written ------ 100 100 000 - 144682 +242 Total_LBAs_Read ------ 100 100 000 - 116711 +245 Unknown_Attribute ------ 100 100 000 - 337168 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 3226 --- Lifetime Power-On Resets +0x01 0x010 4 365 --- Power-on Hours +0x01 0x018 6 891982202 --- Logical Sectors Written +0x01 0x020 6 105547413 --- Number of Write Commands +0x01 0x028 6 3353821720 --- Logical Sectors Read +0x01 0x030 6 132779081 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2730 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 116547 --- Number of Hardware Resets +0x06 0x018 4 6682 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/Intenso/SSD Sata III/SSD Sata III 240GB/7818E037BDB2 b/SSD/Intenso/SSD Sata III/SSD Sata III 240GB/7818E037BDB2 new file mode 100644 index 000000000..b006c4de3 --- /dev/null +++ b/SSD/Intenso/SSD Sata III/SSD Sata III 240GB/7818E037BDB2 @@ -0,0 +1,149 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Intenso SSD Sata III +Serial Number: -- +Firmware Version: S0801A0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 16 03:47:02 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 252 + 12 Power_Cycle_Count -O--CK 100 100 050 - 233 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 24 +164 Unknown_Attribute -O--CK 100 100 050 - 190 +165 Unknown_Attribute -O--CK 100 100 050 - 9 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 6 +168 Unknown_Attribute -O--CK 100 100 050 - 2000 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 30 +194 Temperature_Celsius -O---K 100 100 050 - 27 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 7459 +242 Total_LBAs_Read ----CK 100 100 050 - 8641 +245 Unknown_Attribute -O--CK 100 100 050 - 918 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 233 --- Lifetime Power-On Resets +0x01 0x010 4 252 --- Power-on Hours +0x01 0x018 6 488862683 --- Logical Sectors Written +0x01 0x020 6 3227055 --- Number of Write Commands +0x01 0x028 6 566316945 --- Logical Sectors Read +0x01 0x030 6 6155563 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/KingDian/S280/S280 120GB/31E97C3A0BEF b/SSD/KingDian/S280/S280 120GB/31E97C3A0BEF new file mode 100644 index 000000000..330a20bd4 --- /dev/null +++ b/SSD/KingDian/S280/S280 120GB/31E97C3A0BEF @@ -0,0 +1,147 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: KingDian S280 120GB +Serial Number: -- +Firmware Version: Q1115A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 23 17:05:39 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 1186 + 12 Power_Cycle_Count -O--CK 100 100 050 - 421 +160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 +161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 +163 Initial_Bad_Block_Count -O--CK 100 100 050 - 18 +164 Total_Erase_Count -O--CK 100 100 050 - 14654 +165 Max_Erase_Count -O--CK 100 100 050 - 53 +166 Min_Erase_Count -O--CK 100 100 050 - 7 +167 Average_Erase_Count -O--CK 100 100 050 - 30 +168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 7000 +169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 69 +194 Temperature_Celsius -O---K 100 100 050 - 49 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 424 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Host_Writes_32MiB ----CK 100 100 050 - 30010 +242 Host_Reads_32MiB ----CK 100 100 050 - 25758 +245 TLC_Writes_32MiB -O--CK 100 100 050 - 30701 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 421 --- Lifetime Power-On Resets +0x01 0x010 4 1186 --- Power-on Hours +0x01 0x018 6 1966751581 --- Logical Sectors Written +0x01 0x020 6 0 --- Number of Write Commands +0x01 0x028 6 1688082508 --- Logical Sectors Read +0x01 0x030 6 152 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingDian/S280/S280-240GB/8B08F9B7B7DC b/SSD/KingDian/S280/S280-240GB/8B08F9B7B7DC new file mode 100644 index 000000000..584d0de46 --- /dev/null +++ b/SSD/KingDian/S280/S280-240GB/8B08F9B7B7DC @@ -0,0 +1,199 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingDian S280-240GB +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: P0901A +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 28 16:15:02 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown (0xe001) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 4253 + 12 Power_Cycle_Count ------ 100 100 000 - 4310 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 189 +163 Unknown_Attribute ------ 100 100 000 - 31 +164 Unknown_Attribute ------ 100 100 000 - 60336 +165 Unknown_Attribute ------ 100 100 000 - 81 +166 Unknown_Attribute ------ 100 100 000 - 4 +167 Unknown_Attribute ------ 100 100 000 - 30 +168 Unknown_Attribute ------ 100 100 000 - 1000 +169 Unknown_Attribute ------ 100 100 000 - 97 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 76 +178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 445 +194 Temperature_Celsius ------ 100 100 000 - 40 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Total_LBAs_Written ------ 100 100 000 - 252975 +242 Total_LBAs_Read ------ 100 100 000 - 166058 +245 Unknown_Attribute ------ 100 100 000 - 241344 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: -1/ 0 Celsius +Lifetime Min/Max Temperature: 0/ 0 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 4310 --- Lifetime Power-On Resets +0x01 0x010 4 4253 --- Power-on Hours +0x01 0x018 6 3694125711 --- Logical Sectors Written +0x01 0x020 6 184256018 --- Number of Write Commands +0x01 0x028 6 2292889068 --- Logical Sectors Read +0x01 0x030 6 143685182 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 14625316 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 105430 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/KingFast/SSD/SSD 120GB/F33194902F34 b/SSD/KingFast/SSD/SSD 120GB/F33194902F34 new file mode 100644 index 000000000..3530f18da --- /dev/null +++ b/SSD/KingFast/SSD/SSD 120GB/F33194902F34 @@ -0,0 +1,95 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +Firmware Version: S1022A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 12 01:14:50 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 1284 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 7 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 +163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 35 +164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 103 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1 +166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 7000 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 7 +194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 58 +195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 +241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 261 +242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 68 +245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + + + diff --git a/SSD/KingFast/SSD/SSD 120GB/F4532353E7AC b/SSD/KingFast/SSD/SSD 120GB/F4532353E7AC new file mode 100644 index 000000000..be9e9077e --- /dev/null +++ b/SSD/KingFast/SSD/SSD 120GB/F4532353E7AC @@ -0,0 +1,93 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +Firmware Version: S0424A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 21 07:20:09 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 509 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 9 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 +163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 9 +164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 365 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1 +166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 7000 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 9 +194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 48 +195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 +241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 1271 +242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 153 +245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/SSD/KingFast/SSD/SSD 512GB/34D77DD899FA b/SSD/KingFast/SSD/SSD 512GB/34D77DD899FA new file mode 100644 index 000000000..3e55cf89f --- /dev/null +++ b/SSD/KingFast/SSD/SSD 512GB/34D77DD899FA @@ -0,0 +1,147 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KingFast +Serial Number: -- +Firmware Version: S1022A0 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 4 00:26:10 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 552 + 12 Power_Cycle_Count -O--CK 100 100 050 - 399 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 13 +164 Unknown_Attribute -O--CK 100 100 050 - 4738 +165 Unknown_Attribute -O--CK 100 100 050 - 13 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 9 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 185 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 534 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 42028 +242 Total_LBAs_Read ----CK 100 100 050 - 33479 +245 Unknown_Attribute -O--CK 100 100 050 - 25298 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 239 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 399 --- Lifetime Power-On Resets +0x01 0x010 4 552 --- Power-on Hours +0x01 0x018 6 2754376108 --- Logical Sectors Written +0x01 0x020 6 10355 --- Number of Write Commands +0x01 0x028 6 2194131249 --- Logical Sectors Read +0x01 0x030 6 16325 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/KingSpec/NT/NT-512/37B3F0BCAC4F b/SSD/KingSpec/NT/NT-512/37B3F0BCAC4F new file mode 100644 index 000000000..6ee77c7d2 --- /dev/null +++ b/SSD/KingSpec/NT/NT-512/37B3F0BCAC4F @@ -0,0 +1,106 @@ +smartctl 7.0 2018-12-30 r4883 [NetBSD 9.0 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: NT-512 +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: H190117D +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 12 20:26:09 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 311 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 310 +167 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 +168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 1 +169 Unknown_Attribute 0x0013 096 096 010 Pre-fail Always - 7864335 +171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 +173 Unknown_Attribute 0x0012 200 200 000 Old_age Always - 21476016138 +175 Program_Fail_Count_Chip 0x0022 100 100 010 Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 000 Pre-fail Always - 3280 +187 Reported_Uncorrect 0x0032 100 000 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 104 +194 Temperature_Celsius 0x0022 030 030 000 Old_age Always - 30 (Min/Max 10/50) +206 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 5 +207 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 18 +208 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 10 +209 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 69 +210 Unknown_Attribute 0x0032 200 200 000 Old_age Always - 257 +211 Unknown_Attribute 0x0032 200 200 000 Old_age Always - 174 +231 Temperature_Celsius 0x0023 100 100 005 Pre-fail Always - 0 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 8457320960 +234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 52693249 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 4452822923 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1150880197 +245 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 83 - +# 2 Short offline Completed without error 00% 73 - +# 3 Short offline Aborted by host 00% 61 - +# 4 Short offline Completed without error 00% 44 - +# 5 Short offline Completed without error 00% 42 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Kingston/RBU-SNS4151/RBU-SNS4151S316GG2/DE1A5FFE2BCE b/SSD/Kingston/RBU-SNS4151/RBU-SNS4151S316GG2/DE1A5FFE2BCE new file mode 100644 index 000000000..a7d450888 --- /dev/null +++ b/SSD/Kingston/RBU-SNS4151/RBU-SNS4151S316GG2/DE1A5FFE2BCE @@ -0,0 +1,158 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON RBU-SNS4151S316GG2 +Serial Number: -- +Firmware Version: S9FM02D5 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 16 18:14:29 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 19 + 12 Power_Cycle_Count -O--C- 100 100 000 - 66 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute ------ 100 100 000 - 10 +170 Unknown_Attribute PO--C- 100 100 010 - 7 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute ------ 100 100 000 - 1245192 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--C- 100 100 000 - 0 +183 Runtime_Bad_Block ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 0 +194 Temperature_Celsius PO---K 070 070 000 - 30 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 Unknown_Attribute ------ 100 100 000 - 0 +233 Media_Wearout_Indicator PO--C- 100 100 000 - 123167 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 131365 +242 Total_LBAs_Read -O--C- 100 100 000 - 86511 +243 Unknown_Attribute -O--C- 100 100 000 - 110382343808100 +244 Unknown_Attribute ------ 100 100 000 - 8 +245 Unknown_Attribute ------ 100 100 000 - 19 +246 Unknown_Attribute ------ 100 100 000 - 19271 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/RBUSNS8180/RBUSNS8180S3128GI/C9EC8A2FC108 b/SSD/Kingston/RBUSNS8180/RBUSNS8180S3128GI/C9EC8A2FC108 new file mode 100644 index 000000000..b1bd35aa8 --- /dev/null +++ b/SSD/Kingston/RBUSNS8180/RBUSNS8180S3128GI/C9EC8A2FC108 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON RBUSNS8180S3128GI +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFK60B9 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 4 10:54:18 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 32) minutes. +Conveyance self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 8444 + 12 Power_Cycle_Count -O--C- 100 100 000 - 786 +148 Unknown_Attribute ------ 255 255 000 - 0 +149 Unknown_Attribute ------ 255 255 000 - 0 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute ------ 100 100 000 - 12 +170 Unknown_Attribute PO--C- 100 100 010 - 25 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +173 Unknown_Attribute ------ 100 100 000 - 3407964 +181 Program_Fail_Cnt_Total -O--C- 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 255 255 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 616 +194 Temperature_Celsius PO---K 061 046 000 - 39 (Min/Max 24/54) +196 Reallocated_Event_Count ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 Unknown_Attribute ------ 100 100 000 - 0 +231 Temperature_Celsius PO--C- 100 100 000 - 94 +233 Media_Wearout_Indicator PO--C- 100 100 000 - 5101 +241 Total_LBAs_Written -O--C- 100 100 000 - 3681 +242 Total_LBAs_Read -O--C- 100 100 000 - 779 +244 Unknown_Attribute ------ 100 100 000 - 52 +245 Unknown_Attribute ------ 100 100 000 - 92 +246 Unknown_Attribute ------ 100 100 000 - 785640 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 786 --- Lifetime Power-On Resets +0x01 0x010 4 8444 --- Power-on Hours +0x01 0x018 6 7720211437 --- Logical Sectors Written +0x01 0x028 6 1635144021 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x020 1 54 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37120G/193ADC9D213D b/SSD/Kingston/SA400/SA400S37120G/193ADC9D213D new file mode 100644 index 000000000..e0d37cd8d --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/193ADC9D213D @@ -0,0 +1,173 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 16:21:28 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9338 + 12 Power_Cycle_Count -O--CK 100 100 000 - 31 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 14 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/10 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 116 (Average 100) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 15 +194 Temperature_Celsius -O---K 067 036 000 - 33 (Min/Max 24/36) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 090 090 000 - 90 +233 Flash_Writes_GiB -O--CK 100 100 000 - 5253 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 3746 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 407 +244 Average_Erase_Count ------ 100 100 000 - 100 +245 Max_Erase_Count ------ 100 100 000 - 116 +246 Total_Erase_Count ------ 100 100 000 - 386696 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 8133 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 31 --- Lifetime Power-On Resets +0x01 0x010 4 9338 --- Power-on Hours +0x01 0x018 6 7857142443 --- Logical Sectors Written +0x01 0x028 6 853902684 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 36 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37120G/786ACE0B1778 b/SSD/Kingston/SA400/SA400S37120G/786ACE0B1778 new file mode 100644 index 000000000..c44e90fbc --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/786ACE0B1778 @@ -0,0 +1,89 @@ +smartctl 7.0 2018-12-30 r4883 [NetBSD 9.0_STABLE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D2 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Jul 25 15:22:25 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 000 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 883 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4303 +148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 11 +170 Bad_Blk_Ct_Erl/Lat 0x0000 100 100 000 Old_age Offline - 0/8 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 24 (Average 12) +181 Program_Fail_Cnt_Total 0x0032 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 27 +194 Temperature_Celsius 0x0022 067 060 000 Old_age Always - 33 (Min/Max 13/40) +196 Not_In_Use 0x0032 100 100 000 Old_age Always - 0 +199 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +218 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +231 SSD_Life_Left 0x0000 002 002 000 Old_age Offline - 98 +233 Flash_Writes_GiB 0x0032 100 100 000 Old_age Always - 676 +241 Lifetime_Writes_GiB 0x0032 100 100 000 Old_age Always - 472 +242 Lifetime_Reads_GiB 0x0032 100 100 000 Old_age Always - 299 +244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 12 +245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 24 +246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 48080 +246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 48080 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/SSD/Kingston/SA400/SA400S37120G/B0F77FFC6BDB b/SSD/Kingston/SA400/SA400S37120G/B0F77FFC6BDB new file mode 100644 index 000000000..efa40f662 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/B0F77FFC6BDB @@ -0,0 +1,191 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK71E0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 23:37:16 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10283 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1103 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 5 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 000 - 0/6 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 245 (Average 215) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 74 +194 Temperature_Celsius -O---K 080 059 000 - 20 (Min/Max 7/41) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 022 022 000 - 78 +233 Flash_Writes_GiB -O--CK 100 100 000 - 22075 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 19263 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 12302 +244 Average_Erase_Count ------ 100 100 000 - 215 +245 Max_Erase_Count ------ 100 100 000 - 245 +246 Total_Erase_Count ------ 100 100 000 - 1273548 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 10235 - +# 2 Short offline Completed without error 00% 10199 - +# 3 Short offline Completed without error 00% 10188 - +# 4 Short offline Completed without error 00% 10180 - +# 5 Short offline Completed without error 00% 10167 - +# 6 Short offline Completed without error 00% 10153 - +# 7 Short offline Completed without error 00% 10141 - +# 8 Short offline Completed without error 00% 10127 - +# 9 Short offline Completed without error 00% 10119 - +#10 Short offline Completed without error 00% 7841 - +#11 Short offline Completed without error 00% 7833 - +#12 Short offline Completed without error 00% 7824 - +#13 Short offline Completed without error 00% 7816 - +#14 Short offline Completed without error 00% 7813 - +#15 Short offline Completed without error 00% 7811 - +#16 Extended offline Completed without error 00% 7810 - +#17 Short offline Completed without error 00% 7803 - +#18 Short offline Completed without error 00% 7796 - +#19 Short offline Completed without error 00% 7789 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1103 --- Lifetime Power-On Resets +0x01 0x010 4 10283 --- Power-on Hours +0x01 0x018 6 40398632267 --- Logical Sectors Written +0x01 0x028 6 25801171197 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 20 --- Current Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 7 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 21 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 41 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 42 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37120G/DAB5F335E37A b/SSD/Kingston/SA400/SA400S37120G/DAB5F335E37A new file mode 100644 index 000000000..7690f3fa5 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/DAB5F335E37A @@ -0,0 +1,173 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:33:01 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 6956 + 12 Power_Cycle_Count -O--CK 100 100 000 - 47 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 11 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/8 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 4 (Average 2) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 40 +194 Temperature_Celsius -O---K 073 033 000 - 27 (Min/Max 18/33) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 099 099 000 - 99 +233 Flash_Writes_GiB -O--CK 100 100 000 - 109 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 78 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 70 +244 Average_Erase_Count ------ 100 100 000 - 2 +245 Max_Erase_Count ------ 100 100 000 - 4 +246 Total_Erase_Count ------ 100 100 000 - 8848 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 48 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 47 --- Lifetime Power-On Resets +0x01 0x010 4 6956 --- Power-on Hours +0x01 0x018 6 164316164 --- Logical Sectors Written +0x01 0x028 6 148111227 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 40 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 41 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37120G/F7BF4980A89C b/SSD/Kingston/SA400/SA400S37120G/F7BF4980A89C new file mode 100644 index 000000000..2941cff9a --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37120G/F7BF4980A89C @@ -0,0 +1,161 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1E1 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 20:26:48 2020 AEDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 14823 + 12 Power_Cycle_Count -O--CK 100 100 000 - 12 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 10 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 000 - 0/7 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 364 (Average 333) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 4 +194 Temperature_Celsius -O---K 070 058 000 - 30 (Min/Max 17/42) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 034 034 000 - 66 +233 Flash_Writes_GiB -O--CK 100 100 000 - 16476 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 13173 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 239 +244 Average_Erase_Count ------ 100 100 000 - 333 +245 Max_Erase_Count ------ 100 100 000 - 364 +246 Total_Erase_Count ------ 100 100 000 - 1289312 +246 Total_Erase_Count ------ 100 100 000 - 1289312 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 736 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 14823 --- Power-on Hours +0x01 0x018 6 27626218593 --- Logical Sectors Written +0x01 0x028 6 501313952 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 17 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 33 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/00AF5AFB3B90 b/SSD/Kingston/SA400/SA400S37240G/00AF5AFB3B90 new file mode 100644 index 000000000..2c894876c --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/00AF5AFB3B90 @@ -0,0 +1,160 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK61K1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:51:41 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10747 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 10 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/50 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 202 (Average 141) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 20 +194 Temperature_Celsius -O---K 074 037 000 - 26 (Min/Max 16/37) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 095 095 000 - 95 +233 Flash_Writes_GiB -O--CK 100 100 000 - 28944 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 14532 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 918 +244 Average_Erase_Count ------ 100 100 000 - 141 +245 Max_Erase_Count ------ 100 100 000 - 202 +246 Total_Erase_Count ------ 100 100 000 - 3091208 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2626 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 10747 --- Power-on Hours +0x01 0x018 6 30477475018 --- Logical Sectors Written +0x01 0x028 6 1926677148 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/09EE000D96B9 b/SSD/Kingston/SA400/SA400S37240G/09EE000D96B9 new file mode 100644 index 000000000..7966b29de --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/09EE000D96B9 @@ -0,0 +1,92 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D2 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Oct 20 17:31:47 2020 MST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 000 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 11841 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 139 +148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +167 Write_Protect_Mode 0x0000 100 100 000 Old_age Offline - 0 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 92 +169 Bad_Block_Rate 0x0000 100 100 000 Old_age Offline - 10 +170 Bad_Blk_Ct_Erl/Lat 0x0000 100 100 010 Old_age Offline - 0/7 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 78 (Average 55) +181 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0000 100 100 000 Old_age Offline - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 79 +194 Temperature_Celsius 0x0022 067 062 000 Old_age Always - 33 (Min/Max 21/38) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +199 SATA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 92 +218 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +231 SSD_Life_Left 0x0000 006 006 000 Old_age Offline - 94 +233 Flash_Writes_GiB 0x0032 100 100 000 Old_age Always - 5925 +241 Lifetime_Writes_GiB 0x0032 100 100 000 Old_age Always - 4895 +242 Lifetime_Reads_GiB 0x0032 100 100 000 Old_age Always - 1105 +244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 55 +245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 78 +246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 428064 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/18E2BB646222 b/SSD/Kingston/SA400/SA400S37240G/18E2BB646222 new file mode 100644 index 000000000..30067efe2 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/18E2BB646222 @@ -0,0 +1,175 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:14 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 14481 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 26 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 000 - 0/18 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 27 (Average 14) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 3 +194 Temperature_Celsius -O---K 072 060 000 - 28 (Min/Max 22/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 002 002 000 - 98 +233 Flash_Writes_GiB -O--CK 100 100 000 - 1935 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 1276 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 80 +244 Average_Erase_Count ------ 100 100 000 - 14 +245 Max_Erase_Count ------ 100 100 000 - 27 +246 Total_Erase_Count ------ 100 100 000 - 106656 +246 Total_Erase_Count ------ 100 100 000 - 106656 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 6172 - +# 2 Short offline Completed without error 00% 6172 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 14481 --- Power-on Hours +0x01 0x018 6 2677201027 --- Logical Sectors Written +0x01 0x028 6 168942249 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/2B1BCFA26548 b/SSD/Kingston/SA400/SA400S37240G/2B1BCFA26548 new file mode 100644 index 000000000..729fe0f22 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/2B1BCFA26548 @@ -0,0 +1,175 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:56:14 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 14480 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 16 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 000 - 0/11 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 27 (Average 13) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 3 +194 Temperature_Celsius -O---K 071 060 000 - 29 (Min/Max 22/40) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 002 002 000 - 98 +233 Flash_Writes_GiB -O--CK 100 100 000 - 1940 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 1279 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 72 +244 Average_Erase_Count ------ 100 100 000 - 13 +245 Max_Erase_Count ------ 100 100 000 - 27 +246 Total_Erase_Count ------ 100 100 000 - 107872 +246 Total_Erase_Count ------ 100 100 000 - 107872 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 6172 - +# 2 Short offline Completed without error 00% 6171 - + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 14480 --- Power-on Hours +0x01 0x018 6 2684033454 --- Logical Sectors Written +0x01 0x028 6 153073430 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/356E2880F7FA b/SSD/Kingston/SA400/SA400S37240G/356E2880F7FA new file mode 100644 index 000000000..6a843e24b --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/356E2880F7FA @@ -0,0 +1,145 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK61K1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Oct 31 20:04:09 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 417 + 12 Power_Cycle_Count -O--CK 100 100 000 - 224 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 15 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/72 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 1 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 27 +194 Temperature_Celsius -O---K 030 047 000 - 30 (Min/Max 22/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 100 100 000 - 100 +233 Flash_Writes_GiB -O--CK 100 100 000 - 86 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 116 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 40 +244 Average_Erase_Count ------ 100 100 000 - 0 +245 Max_Erase_Count ------ 100 100 000 - 1 +246 Total_Erase_Count ------ 100 100 000 - 8096 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 224 --- Lifetime Power-On Resets +0x01 0x010 4 417 --- Power-on Hours +0x01 0x018 6 244558827 --- Logical Sectors Written +0x01 0x028 6 85144385 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/3B25BE3816E9 b/SSD/Kingston/SA400/SA400S37240G/3B25BE3816E9 new file mode 100644 index 000000000..e49fc3377 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/3B25BE3816E9 @@ -0,0 +1,145 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: S1Z40102 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 31 23:35:58 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 100 + 9 Power_On_Hours -O--CK 100 100 000 - 581 + 12 Power_Cycle_Count -O--CK 100 100 000 - 109 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 59 +194 Temperature_Celsius -O---K 047 058 000 - 47 (Min/Max 30/58) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 097 097 000 - 97 +233 Flash_Writes_GiB -O--CK 100 100 000 - 1871 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 1957 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 1595 +244 Average_Erase_Count ------ 100 100 000 - 33 +245 Max_Erase_Count ------ 100 100 000 - 54 +246 Total_Erase_Count ------ 100 100 000 - 16486 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 109 --- Lifetime Power-On Resets +0x01 0x010 4 581 --- Power-on Hours +0x01 0x018 6 4104840262 --- Logical Sectors Written +0x01 0x020 6 4756498 --- Number of Write Commands +0x01 0x028 6 3345879260 --- Logical Sectors Read +0x01 0x030 6 3515283 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 21 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/8C50BDB364A7 b/SSD/Kingston/SA400/SA400S37240G/8C50BDB364A7 new file mode 100644 index 000000000..be43efbf9 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/8C50BDB364A7 @@ -0,0 +1,158 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK61K1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:51:47 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10747 + 12 Power_Cycle_Count -O--CK 100 100 000 - 24 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 8 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/42 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 181 (Average 127) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 20 +194 Temperature_Celsius -O---K 075 038 000 - 25 (Min/Max 16/38) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 095 095 000 - 95 +233 Flash_Writes_GiB -O--CK 100 100 000 - 25968 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 13462 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 933 +244 Average_Erase_Count ------ 100 100 000 - 127 +245 Max_Erase_Count ------ 100 100 000 - 181 +246 Total_Erase_Count ------ 100 100 000 - 2784920 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2626 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 24 --- Lifetime Power-On Resets +0x01 0x010 4 10747 --- Power-on Hours +0x01 0x018 6 28233149546 --- Logical Sectors Written +0x01 0x028 6 1958711396 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SA400/SA400S37240G/94EB6942C702 b/SSD/Kingston/SA400/SA400S37240G/94EB6942C702 new file mode 100644 index 000000000..70fac5ed0 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/94EB6942C702 @@ -0,0 +1,160 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK61K1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:51:41 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10747 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 15 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/74 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 182 (Average 128) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 20 +194 Temperature_Celsius -O---K 075 038 000 - 25 (Min/Max 16/38) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 095 095 000 - 95 +233 Flash_Writes_GiB -O--CK 100 100 000 - 26064 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 13462 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 928 +244 Average_Erase_Count ------ 100 100 000 - 128 +245 Max_Erase_Count ------ 100 100 000 - 182 +246 Total_Erase_Count ------ 100 100 000 - 2793400 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2626 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 10747 --- Power-on Hours +0x01 0x018 6 28233139978 --- Logical Sectors Written +0x01 0x028 6 1947925932 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/BF513F51CD47 b/SSD/Kingston/SA400/SA400S37240G/BF513F51CD47 new file mode 100644 index 000000000..e5ae0dbf9 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/BF513F51CD47 @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1D1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 1 18:32:28 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 2909 + 12 Power_Cycle_Count -O--CK 100 100 000 - 353 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 11 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/8 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 66 (Average 40) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 59 +194 Temperature_Celsius -O---K 067 062 000 - 33 (Min/Max 14/38) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 004 004 000 - 96 +233 Flash_Writes_GiB -O--CK 100 100 000 - 6392 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 3760 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 2235 +244 Average_Erase_Count ------ 100 100 000 - 40 +245 Max_Erase_Count ------ 100 100 000 - 66 +246 Total_Erase_Count ------ 100 100 000 - 315280 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 353 --- Lifetime Power-On Resets +0x01 0x010 4 2909 --- Power-on Hours +0x01 0x018 6 7885738471 --- Logical Sectors Written +0x01 0x028 6 4688361782 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/C44917288A1F b/SSD/Kingston/SA400/SA400S37240G/C44917288A1F new file mode 100644 index 000000000..2ca520635 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/C44917288A1F @@ -0,0 +1,160 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFK61K1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:51:41 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 10747 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 17 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/83 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 197 (Average 141) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 20 +194 Temperature_Celsius -O---K 075 037 000 - 25 (Min/Max 16/37) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 095 095 000 - 95 +233 Flash_Writes_GiB -O--CK 100 100 000 - 28925 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 14532 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 914 +244 Average_Erase_Count ------ 100 100 000 - 141 +245 Max_Erase_Count ------ 100 100 000 - 197 +246 Total_Erase_Count ------ 100 100 000 - 3082176 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2626 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 10747 --- Power-on Hours +0x01 0x018 6 30477475018 --- Logical Sectors Written +0x01 0x028 6 1916993936 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 25 --- Current Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/DF7AF439B527 b/SSD/Kingston/SA400/SA400S37240G/DF7AF439B527 new file mode 100644 index 000000000..6c7bbcb4c --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/DF7AF439B527 @@ -0,0 +1,179 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: S1Z40102 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Oct 31 20:04:09 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 100 + 9 Power_On_Hours -O--CK 100 100 000 - 1157 + 12 Power_Cycle_Count -O--CK 100 100 000 - 765 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 0 +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 108 +194 Temperature_Celsius -O---K 036 063 000 - 36 (Min/Max 25/63) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 091 091 000 - 91 +233 Flash_Writes_GiB -O--CK 100 100 000 - 7386 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 5780 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 5840 +244 Average_Erase_Count ------ 100 100 000 - 97 +245 Max_Erase_Count ------ 100 100 000 - 117 +246 Total_Erase_Count ------ 100 100 000 - 47969 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 29 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 29 [0] log entry is empty +Error 28 [3] log entry is empty +Error 27 [2] log entry is empty +Error 26 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + 2f 00 00 01 01 00 00 00 00 00 03 40 08 00:00:00.000 READ LOG EXT + 2f 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 READ LOG EXT + b0 00 d5 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ LOG + b0 00 da 00 00 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART RETURN STATUS + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 765 --- Lifetime Power-On Resets +0x01 0x010 4 1157 --- Power-on Hours +0x01 0x018 6 3531642114 --- Logical Sectors Written +0x01 0x020 6 29392 --- Number of Write Commands +0x01 0x028 6 3658165985 --- Logical Sectors Read +0x01 0x030 6 235 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 9 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Kingston/SA400/SA400S37240G/EA92C8280ECB b/SSD/Kingston/SA400/SA400S37240G/EA92C8280ECB new file mode 100644 index 000000000..1a49053d1 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37240G/EA92C8280ECB @@ -0,0 +1,90 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1E1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Oct 24 15:23:51 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 000 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 104 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 98 +148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +167 Write_Protect_Mode 0x0000 100 100 000 Old_age Offline - 0 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +169 Bad_Block_Rate 0x0000 100 100 000 Old_age Offline - 13 +170 Bad_Blk_Ct_Erl/Lat 0x0000 100 100 010 Old_age Offline - 0/9 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 8 (Average 3) +181 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0000 100 100 000 Old_age Offline - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 44 +194 Temperature_Celsius 0x0022 077 068 000 Old_age Always - 23 (Min/Max 17/32) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +199 SATA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +218 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +231 SSD_Life_Left 0x0000 001 001 000 Old_age Offline - 99 +233 Flash_Writes_GiB 0x0032 100 100 000 Old_age Always - 476 +241 Lifetime_Writes_GiB 0x0032 100 100 000 Old_age Always - 349 +242 Lifetime_Reads_GiB 0x0032 100 100 000 Old_age Always - 154 +244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 3 +245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 8 +246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 25200 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/SSD/Kingston/SA400/SA400S37480G/BC4CBE17D909 b/SSD/Kingston/SA400/SA400S37480G/BC4CBE17D909 new file mode 100644 index 000000000..589b876ef --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37480G/BC4CBE17D909 @@ -0,0 +1,75 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37480G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKK1B3 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 20:47:26 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 131 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 70 +148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +167 Write_Protect_Mode 0x0000 100 100 000 Old_age Offline - 0 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +169 Bad_Block_Rate 0x0000 100 100 000 Old_age Offline - 10 +170 Bad_Blk_Ct_Erl/Lat 0x0000 100 100 010 Old_age Offline - 0/10 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 3 (Average 2) +181 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0000 100 100 000 Old_age Offline - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 4 +194 Temperature_Celsius 0x0022 028 031 000 Old_age Always - 28 (Min/Max 24/31) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +199 SATA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +218 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +231 SSD_Life_Left 0x0000 099 099 000 Old_age Offline - 99 +233 Flash_Writes_GiB 0x0032 100 100 000 Old_age Always - 306 +241 Lifetime_Writes_GiB 0x0032 100 100 000 Old_age Always - 293 +242 Lifetime_Reads_GiB 0x0032 100 100 000 Old_age Always - 63 +244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 2 +245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 3 +246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 26240 + +SMART Error Log not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/SSD/Kingston/SA400/SA400S37480G/D8DD5546501C b/SSD/Kingston/SA400/SA400S37480G/D8DD5546501C new file mode 100644 index 000000000..0bb717048 --- /dev/null +++ b/SSD/Kingston/SA400/SA400S37480G/D8DD5546501C @@ -0,0 +1,157 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SA400S37480G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SBFKB1H5 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Aug 22 00:28:38 2020 +08 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 5209 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1313 +148 Unknown_Attribute ------ 100 100 000 - 0 +149 Unknown_Attribute ------ 100 100 000 - 0 +167 Write_Protect_Mode ------ 100 100 000 - 0 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Rate ------ 100 100 000 - 10 +170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/7 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 MaxAvgErase_Ct ------ 100 100 000 - 73 (Average 45) +181 Program_Fail_Count -O--CK 100 100 000 - 0 +182 Erase_Fail_Count ------ 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 181 +194 Temperature_Celsius -O---K 064 055 000 - 36 (Min/Max 22/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 +218 CRC_Error_Count -O--CK 100 100 000 - 0 +231 SSD_Life_Left ------ 005 005 000 - 95 +233 Flash_Writes_GiB -O--CK 100 100 000 - 16862 +241 Lifetime_Writes_GiB -O--CK 100 100 000 - 8858 +242 Lifetime_Reads_GiB -O--CK 100 100 000 - 8744 +244 Average_Erase_Count ------ 100 100 000 - 45 +245 Max_Erase_Count ------ 100 100 000 - 73 +246 Total_Erase_Count ------ 100 100 000 - 711488 +247 Unknown_Attribute ------ 100 100 000 - 711488 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1313 --- Lifetime Power-On Resets +0x01 0x010 4 5209 --- Power-on Hours +0x01 0x018 6 18577174251 --- Logical Sectors Written +0x01 0x028 6 18337721423 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 11 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SH103/SH103S3120G/287C4CF44AC6 b/SSD/Kingston/SH103/SH103S3120G/287C4CF44AC6 new file mode 100644 index 000000000..15a333695 --- /dev/null +++ b/SSD/Kingston/SH103/SH103S3120G/287C4CF44AC6 @@ -0,0 +1,202 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT arm] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SH103S3120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 580ABBF0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Sep 15 08:58:54 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Unavailable +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 095 095 050 - 0/168929401 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 053 053 000 - 41224h+52m+52.800s + 12 Power_Cycle_Count -O--CK 096 096 000 - 4668 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 4570 +177 Wear_Range_Delta ------ 000 000 000 - 96 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +189 Airflow_Temperature_Cel ------ 030 042 000 - 30 (Min/Max -21/42) +194 Temperature_Celsius -O---K 030 042 000 - 30 (Min/Max -21/42) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/168929401 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/168929401 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/168929401 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 094 094 010 - 1 +233 SandForce_Internal -O--CK 000 000 000 - 11719 +234 SandForce_Internal -O--CK 000 000 000 - 33004 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 33004 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 17673 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 16 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 25908 - +# 2 Extended offline Completed without error 00% 16860 - +# 3 Conveyance offline Completed without error 00% 16859 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: -21/42 Celsius +Lifetime Min/Max Temperature: -21/74 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (130) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4668 --- Lifetime Power-On Resets +0x01 0x010 4 41224 --- Power-on Hours +0x01 0x018 6 69216167586 --- Logical Sectors Written +0x01 0x028 6 37064137814 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 52 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 72 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 22 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 24 --- Lowest Average Long Term Temperature +0x05 0x050 4 280 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 608 --- Number of ASR Events +0x06 0x018 4 73 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Kingston/SH103/SH103S3120G/F91A88D46918 b/SSD/Kingston/SH103/SH103S3120G/F91A88D46918 new file mode 100644 index 000000000..314c46cbb --- /dev/null +++ b/SSD/Kingston/SH103/SH103S3120G/F91A88D46918 @@ -0,0 +1,199 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SH103S3120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 521ABBF0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 16:03:23 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 1) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 36) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO--CK 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 095 095 000 - 5051h+02m+31.110s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1342 +171 Program_Fail_Count -O-R-- 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 56 +177 Wear_Range_Delta ------ 000 000 000 - 1 +181 Program_Fail_Count -O-R-- 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +189 Airflow_Temperature_Cel ------ 020 042 000 - 20 (Min/Max 10/42) +194 Temperature_Celsius -O---K 020 042 000 - 20 (Min/Max 10/42) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 100 100 010 - 0 +233 SandForce_Internal -O--CK 000 000 000 - 2254 +234 SandForce_Internal -O--CK 000 000 000 - 1399 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 1399 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 1282 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 1 Device Statistics log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 20 Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 10/-127 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (48) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1345 --- Lifetime Power-On Resets +0x01 0x018 6 2935287128 --- Logical Sectors Written +0x01 0x028 6 2690609295 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 20 --- Current Temperature +0x05 0x010 1 24 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 71 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 120 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 3682 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Kingston/SHFS37/SHFS37A120G/683601F988A2 b/SSD/Kingston/SHFS37/SHFS37A120G/683601F988A2 new file mode 100644 index 000000000..51a2713bc --- /dev/null +++ b/SSD/Kingston/SHFS37/SHFS37A120G/683601F988A2 @@ -0,0 +1,200 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SHFS37A120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 60AABBF0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 1 18:32:28 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 091 091 000 - 8037h+13m+26.140s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1993 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 83 +177 Wear_Range_Delta ------ 000 000 000 - 3 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +189 Airflow_Temperature_Cel ------ 035 039 000 - 35 (Min/Max 6/39) +194 Temperature_Celsius -O---K 035 039 000 - 35 (Min/Max 6/39) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left ------ 094 094 011 - 68719476737 +233 SandForce_Internal -O--CK 000 000 000 - 12468 +234 SandForce_Internal -O--CK 000 000 000 - 10290 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 10290 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 5805 +244 Unknown_Attribute ------ 098 098 010 - 7995476 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 6/39 Celsius +Lifetime Min/Max Temperature: 6/39 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (279) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1993 --- Lifetime Power-On Resets +0x01 0x010 4 8037 --- Power-on Hours +0x01 0x018 6 21581425912 --- Logical Sectors Written +0x01 0x028 6 12175751204 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 140 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 39 --- Highest Temperature +0x05 0x028 1 7 --- Lowest Temperature +0x05 0x030 1 33 --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 28 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 3862 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Kingston/SHFS37/SHFS37A240G/B85061AA5404 b/SSD/Kingston/SHFS37/SHFS37A240G/B85061AA5404 new file mode 100644 index 000000000..80465deef --- /dev/null +++ b/SSD/Kingston/SHFS37/SHFS37A240G/B85061AA5404 @@ -0,0 +1,203 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SHFS37A240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 603ABBF0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 25 14:15:06 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 095 095 050 - 0/12664007 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 98h+46m+39.460s + 12 Power_Cycle_Count -O--CK 100 100 000 - 4 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 0 +177 Wear_Range_Delta ------ 000 000 000 - 2 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +189 Airflow_Temperature_Cel ------ 029 051 000 - 29 (Min/Max 11/51) +194 Temperature_Celsius -O---K 029 051 000 - 29 (Min/Max 11/51) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/12664007 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/12664007 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/12664007 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left ------ 098 098 011 - 4294967297 +233 SandForce_Internal -O--CK 000 000 000 - 4294962287 +234 SandForce_Internal -O--CK 000 000 000 - 145 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 145 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 11 +244 Unknown_Attribute ------ 098 098 010 - 7012413 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 16 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 43 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 11/51 Celsius +Lifetime Min/Max Temperature: 11/66 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (264) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 4 --- Lifetime Power-On Resets +0x01 0x010 4 98 --- Power-on Hours +0x01 0x018 6 304427647 --- Logical Sectors Written +0x01 0x028 6 25123153 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 27 --- Average Short Term Temperature +0x05 0x018 1 26 --- Average Long Term Temperature +0x05 0x020 1 62 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 19 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 3978 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 50 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 51 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Kingston/SHSS37/SHSS37A240G/0AEA6DBC70FA b/SSD/Kingston/SHSS37/SHSS37A240G/0AEA6DBC70FA new file mode 100644 index 000000000..2e16024e2 --- /dev/null +++ b/SSD/Kingston/SHSS37/SHSS37A240G/0AEA6DBC70FA @@ -0,0 +1,205 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SHSS37A240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SAFM02.H +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Sep 12 18:21:14 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Not_In_Use P-S--- 100 100 050 - 0 + 3 Not_In_Use POS--- 100 100 050 - 0 + 5 Retired_Block_Count PO--C- 100 100 050 - 0 + 7 Not_In_Use PO-R-- 100 100 050 - 0 + 8 Not_In_Use P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 600 + 12 Power_Cycle_Count -O--C- 100 100 000 - 281 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 010 - 0/516 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 7 (Average 2) +175 Not_In_Use PO--C- 100 100 050 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 59 +194 Temperature_Celsius PO---K 066 060 030 - 34 (Min/Max 21/40) +196 Reallocated_Event_Count -O---- 100 100 010 - 0 +197 Not_In_Use -O--CK 100 100 000 - 0 +199 SATA_CRC_Error_Count PO-R-- 100 100 050 - 0 +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 100 +233 Flash_Writes_GiB PO-R-- 100 100 000 - 666 +240 Not_In_Use PO--C- 100 100 000 - 0 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 531 +242 Lifetime_Reads_GiB -O--C- 100 100 000 - 495 +244 Average_Erase_Count -O---- 100 100 000 - 2 +245 Max_Erase_Count -O---- 100 100 000 - 7 +246 Total_Erase_Count -O--C- 100 100 000 - 177856 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 595 - +# 2 Short offline Completed without error 00% 579 - +# 3 Short offline Completed without error 00% 511 - +# 4 Short offline Completed without error 00% 479 - +# 5 Short offline Completed without error 00% 473 - +# 6 Short offline Completed without error 00% 438 - +# 7 Short offline Completed without error 00% 437 - +# 8 Short offline Completed without error 00% 436 - +# 9 Short offline Completed without error 00% 432 - +#10 Short offline Completed without error 00% 415 - +#11 Conveyance offline Completed without error 00% 401 - +#12 Short offline Completed without error 00% 400 - +#13 Short offline Completed without error 00% 390 - +#14 Short offline Completed without error 00% 350 - +#15 Short offline Completed without error 00% 326 - +#16 Short offline Completed without error 00% 319 - +#17 Short offline Completed without error 00% 305 - +#18 Short offline Completed without error 00% 298 - +#19 Short offline Completed without error 00% 285 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 281 --- Lifetime Power-On Resets +0x01 0x010 4 600 --- Power-on Hours +0x01 0x018 6 1114155015 --- Logical Sectors Written +0x01 0x020 6 19097975 --- Number of Write Commands +0x01 0x028 6 1040157538 --- Logical Sectors Read +0x01 0x030 6 18884672 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 86102 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2367 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SM2280/SM2280S3G2240G/D698F2818BA5 b/SSD/Kingston/SM2280/SM2280S3G2240G/D698F2818BA5 new file mode 100644 index 000000000..0e03a21a5 --- /dev/null +++ b/SSD/Kingston/SM2280/SM2280S3G2240G/D698F2818BA5 @@ -0,0 +1,184 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SM2280S3G2240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: SAFM01.V +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 14 21:33:15 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 4344 + 12 Power_Cycle_Count -O--C- 100 100 000 - 508 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 100 100 010 - 437 +173 Unknown_Attribute -O--C- 100 100 000 - 786454 +175 Program_Fail_Count_Chip PO--C- 100 100 050 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 111 +194 Temperature_Celsius PO---K 065 042 030 - 35 (Min/Max 17/58) +196 Reallocated_Event_Count -O---- 100 100 010 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 100 +233 Media_Wearout_Indicator PO-R-- 100 100 000 - 676 +240 Unknown_SSD_Attribute PO--C- 100 100 000 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 2892 +242 Total_LBAs_Read -O--C- 100 100 000 - 1872 +244 Unknown_Attribute -O---- 100 100 000 - 12 +245 Unknown_Attribute -O---- 100 100 000 - 22 +246 Unknown_Attribute -O--C- 100 100 000 - 811904 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 508 --- Lifetime Power-On Resets +0x01 0x018 6 6065692209 --- Logical Sectors Written +0x01 0x020 6 101444464 --- Number of Write Commands +0x01 0x028 6 3927635510 --- Logical Sectors Read +0x01 0x030 6 50467467 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 67595 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1652 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 5954 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2101 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SMS200/SMS200S3120G/4B774EA8E43E b/SSD/Kingston/SMS200/SMS200S3120G/4B774EA8E43E new file mode 100644 index 000000000..16eb9e79a --- /dev/null +++ b/SSD/Kingston/SMS200/SMS200S3120G/4B774EA8E43E @@ -0,0 +1,200 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SMS200S3120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 608ABBF0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:49:03 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 095 095 050 - 2/118600718 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 070 070 000 - 26695h+41m+05.100s + 12 Power_Cycle_Count -O--CK 100 100 000 - 13 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 12 +177 Wear_Range_Delta ------ 000 000 000 - 1 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +189 Airflow_Temperature_Cel ------ 045 067 000 - 45 (Min/Max 23/67) +194 Temperature_Celsius -O---K 045 067 000 - 45 (Min/Max 23/67) +195 ECC_Uncorr_Error_Count --SRC- 112 112 000 - 2/118600718 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 112 112 000 - 2/118600718 +204 Soft_ECC_Correct_Rate --SRC- 112 112 000 - 2/118600718 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left ------ 095 095 011 - 180388626433 +233 SandForce_Internal -O--CK 000 000 000 - 7729 +234 SandForce_Internal -O--CK 000 000 000 - 1737 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 1737 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 682 +244 Unknown_Attribute ------ 099 099 010 - 3211313 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 23/67 Celsius +Lifetime Min/Max Temperature: 23/67 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/80 Celsius +Temperature History Size (Index): 478 (56) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 13 --- Lifetime Power-On Resets +0x01 0x010 4 26695 --- Power-on Hours +0x01 0x018 6 3643636127 --- Logical Sectors Written +0x01 0x028 6 1432333239 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 24 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x010 1 43 --- Average Short Term Temperature +0x05 0x018 1 44 --- Average Long Term Temperature +0x05 0x020 1 67 --- Highest Temperature +0x05 0x028 1 -128 --- Lowest Temperature +0x05 0x030 1 51 --- Highest Average Short Term Temperature +0x05 0x038 1 38 --- Lowest Average Short Term Temperature +0x05 0x040 1 44 --- Highest Average Long Term Temperature +0x05 0x048 1 41 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 10 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 229 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Kingston/SMS200/SMS200S3120G/6821986AE169 b/SSD/Kingston/SMS200/SMS200S3120G/6821986AE169 new file mode 100644 index 000000000..c0b69f80a --- /dev/null +++ b/SSD/Kingston/SMS200/SMS200S3120G/6821986AE169 @@ -0,0 +1,202 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SMS200S3120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 600ABBF0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 17 14:52:06 2020 AST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Unavailable +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 095 095 050 - 0/3427419 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 090 090 000 - 9249h+52m+20.830s + 12 Power_Cycle_Count -O--CK 097 097 000 - 3457 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 955 +177 Wear_Range_Delta ------ 000 000 000 - 2 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +189 Airflow_Temperature_Cel ------ 048 071 000 - 48 (Min/Max 21/71) +194 Temperature_Celsius -O---K 048 071 000 - 48 (Min/Max 21/71) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/3427419 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/3427419 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/3427419 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left ------ 096 096 011 - 1 +233 SandForce_Internal -O--CK 000 000 000 - 5845 +234 SandForce_Internal -O--CK 000 000 000 - 2775 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 2775 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 2741 +244 Unknown_Attribute ------ 099 099 010 - 5963824 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 16 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2714 - +# 2 Short offline Completed without error 00% 2714 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 48 Celsius +Power Cycle Min/Max Temperature: 21/71 Celsius +Lifetime Min/Max Temperature: 21/71 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/80 Celsius +Temperature History Size (Index): 478 (331) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 3457 --- Lifetime Power-On Resets +0x01 0x010 4 9249 --- Power-on Hours +0x01 0x018 6 5820254995 --- Logical Sectors Written +0x01 0x028 6 5749290732 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 48 --- Current Temperature +0x05 0x010 1 50 --- Average Short Term Temperature +0x05 0x018 1 47 --- Average Long Term Temperature +0x05 0x020 1 70 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x030 1 53 --- Highest Average Short Term Temperature +0x05 0x038 1 36 --- Lowest Average Short Term Temperature +0x05 0x040 1 47 --- Highest Average Long Term Temperature +0x05 0x048 1 39 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 11491 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Kingston/SMS200/SMS200S3120G/9A64D4DA27ED b/SSD/Kingston/SMS200/SMS200S3120G/9A64D4DA27ED new file mode 100644 index 000000000..14c063cfe --- /dev/null +++ b/SSD/Kingston/SMS200/SMS200S3120G/9A64D4DA27ED @@ -0,0 +1,105 @@ +smartctl 7.1 2019-12-30 r5022 [DragonFly 5.9-DEVELOPMENT x86_64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SMS200S3120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 60AABBF0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Aug 1 08:52:02 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 095 095 050 Old_age Always - 2/114447839 + 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 + 9 Power_On_Hours_and_Msec 0x0032 069 069 000 Old_age Always - 27488h+12m+12.230s + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 966 +171 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 931 +177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 1 +181 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 +189 Airflow_Temperature_Cel 0x0000 061 112 000 Old_age Offline - 61 (Min/Max 15/112) +194 Temperature_Celsius 0x0022 061 112 000 Old_age Always - 61 (Min/Max 15/112) +195 ECC_Uncorr_Error_Count 0x001c 112 112 000 Old_age Offline - 2/114447839 +196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 +201 Unc_Soft_Read_Err_Rate 0x001c 112 112 000 Old_age Offline - 2/114447839 +204 Soft_ECC_Correct_Rate 0x001c 112 112 000 Old_age Offline - 2/114447839 +230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 +231 SSD_Life_Left 0x0000 096 096 011 Old_age Offline - 34359738369 +233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 6562 +234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 4938 +241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 4938 +242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 1589 +244 Unknown_Attribute 0x0000 099 099 010 Old_age Offline - 3276840 + +SMART Error Log not supported + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 23902 - +# 2 Short offline Completed without error 00% 23807 - +# 3 Short offline Completed without error 00% 23783 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Kingston/SMS200/SMS200S330G/6382D7408EB6 b/SSD/Kingston/SMS200/SMS200S330G/6382D7408EB6 new file mode 100644 index 000000000..9d1db4e50 --- /dev/null +++ b/SSD/Kingston/SMS200/SMS200S330G/6382D7408EB6 @@ -0,0 +1,202 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p5 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SMS200S330G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 605ABBF2 +User Capacity: 30,016,659,456 bytes [30.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 18 11:00:35 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 096 096 000 - 4011h+10m+28.690s + 12 Power_Cycle_Count -O--CK 100 100 000 - 8 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 8 +177 Wear_Range_Delta ------ 000 000 000 - 0 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +189 Airflow_Temperature_Cel ------ 045 045 000 - 45 (Min/Max 19/45) +194 Temperature_Celsius -O---K 045 045 000 - 45 (Min/Max 19/45) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left ------ 100 100 011 - 0 +233 SandForce_Internal -O--CK 000 000 000 - 0 +234 SandForce_Internal -O--CK 000 000 000 - 0 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 0 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 0 +244 Unknown_Attribute ------ 100 100 010 - 131072 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 19/45 Celsius +Lifetime Min/Max Temperature: 19/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/80 Celsius +Temperature History Size (Index): 478 (9) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 8 --- Lifetime Power-On Resets +0x01 0x010 4 4011 --- Power-on Hours +0x01 0x018 6 0 --- Logical Sectors Written +0x01 0x028 6 16742 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 34 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 17 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Kingston/SMS200/SMS200S330G/885B653BEE71 b/SSD/Kingston/SMS200/SMS200S330G/885B653BEE71 new file mode 100644 index 000000000..284162a30 --- /dev/null +++ b/SSD/Kingston/SMS200/SMS200S330G/885B653BEE71 @@ -0,0 +1,102 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SMS200S330G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 60AABBF0 +User Capacity: 30,016,659,456 bytes [30.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Oct 19 06:50:51 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 095 095 050 Old_age Always - 2/15012282 + 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 + 9 Power_On_Hours_and_Msec 0x0032 063 063 000 Old_age Always - 32869h+12m+29.990s + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 71 +171 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 69 +177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 4 +181 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 +189 Airflow_Temperature_Cel 0x0000 051 071 000 Old_age Offline - 51 (Min/Max 20/71) +194 Temperature_Celsius 0x0022 051 071 000 Old_age Always - 51 (Min/Max 20/71) +195 ECC_Uncorr_Error_Count 0x001c 104 104 000 Old_age Offline - 2/15012282 +196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 +201 Unc_Soft_Read_Err_Rate 0x001c 104 104 000 Old_age Offline - 2/15012282 +204 Soft_ECC_Correct_Rate 0x001c 104 104 000 Old_age Offline - 2/15012282 +230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 +231 SSD_Life_Left 0x0000 100 100 011 Old_age Offline - 0 +233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 10463 +234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 503 +241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 503 +242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 205 +244 Unknown_Attribute 0x0000 097 097 010 Old_age Offline - 7995482 + +SMART Error Log not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Kingston/SMS200/SMS200S360G/71CE82B4D2C6 b/SSD/Kingston/SMS200/SMS200S360G/71CE82B4D2C6 new file mode 100644 index 000000000..74d66324e --- /dev/null +++ b/SSD/Kingston/SMS200/SMS200S360G/71CE82B4D2C6 @@ -0,0 +1,97 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SMS200S360G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 524ABBF0 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 09:57:57 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 1) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 36) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0033 095 095 050 Pre-fail Always - 0/171569666 + 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 + 9 Power_On_Hours_and_Msec 0x0032 038 038 000 Old_age Always - 54723h+57m+37.190s + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 68 +171 Program_Fail_Count 0x000a 000 000 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0 +174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 63 +177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 3 +181 Program_Fail_Count 0x000a 000 000 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 044 069 000 Old_age Always - 44 (Min/Max -19/69) +195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/171569666 +196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 +201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/171569666 +204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/171569666 +230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 +231 SSD_Life_Left 0x0013 062 062 010 Pre-fail Always - 1 +233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 17725 +234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 3206 +241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 3206 +242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 299 + +SMART Error Log not supported + +SMART Self-test Log not supported + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Kingston/SMS200/SMS200S360G/BF8B74F534AB b/SSD/Kingston/SMS200/SMS200S360G/BF8B74F534AB new file mode 100644 index 000000000..a3f7eb07e --- /dev/null +++ b/SSD/Kingston/SMS200/SMS200S360G/BF8B74F534AB @@ -0,0 +1,102 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SMS200S360G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 608ABBF0 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Oct 19 09:59:51 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 095 095 050 Old_age Always - 0/28577946 + 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 + 9 Power_On_Hours_and_Msec 0x0032 066 066 000 Old_age Always - 30403h+35m+08.580s + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26 +171 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 25 +177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 1 +181 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 +189 Airflow_Temperature_Cel 0x0000 049 070 000 Old_age Offline - 49 (Min/Max 14/70) +194 Temperature_Celsius 0x0022 049 070 000 Old_age Always - 49 (Min/Max 14/70) +195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/28577946 +196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 +201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/28577946 +204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/28577946 +230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 +231 SSD_Life_Left 0x0000 093 093 011 Old_age Offline - 1 +233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 6433 +234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 937 +241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 937 +242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 187 +244 Unknown_Attribute 0x0000 098 098 010 Old_age Offline - 5111886 + +SMART Error Log not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Kingston/SMSM150/SMSM150S324G2/F66155B9B455 b/SSD/Kingston/SMSM150/SMSM150S324G2/F66155B9B455 new file mode 100644 index 000000000..3b01771fe --- /dev/null +++ b/SSD/Kingston/SMSM150/SMSM150S324G2/F66155B9B455 @@ -0,0 +1,137 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SMSM150S324G2 +Serial Number: -- +Firmware Version: S8FM06.8 +User Capacity: 24,015,495,168 bytes [24.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s +Local Time is: Thu Oct 29 15:56:14 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 255) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 15600 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 2972 +168 Unknown_Attribute -O--C- 100 100 000 - 9 +170 Unknown_Attribute PO---- 100 100 010 - 15 +173 Unknown_Attribute -O--C- 100 100 000 - 69207174 +175 Program_Fail_Count_Chip -O--C- 100 100 010 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 2088 +194 Temperature_Celsius PO---K 040 054 000 - 40 +196 Reallocated_Event_Count -O---- 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +233 Media_Wearout_Indicator PO-R-- 100 100 000 - 22452 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 13125 +242 Total_LBAs_Read -O--C- 100 100 000 - 2263 +244 Unknown_Attribute -O---- 100 100 050 - 1056 +245 Unknown_Attribute -O---- 100 100 050 - 1158 +246 Unknown_Attribute -O---- 100 100 050 - 7392420 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Kingston/SMSM151/SMSM151S3128GD/381F9805791F b/SSD/Kingston/SMSM151/SMSM151S3128GD/381F9805791F new file mode 100644 index 000000000..f89bb053b --- /dev/null +++ b/SSD/Kingston/SMSM151/SMSM151S3128GD/381F9805791F @@ -0,0 +1,107 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SMSM151S3128GD +Serial Number: -- +Firmware Version: S9FM01.8 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 18 21:48:55 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000a 099 099 000 Old_age Always - 113 + 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 + 3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0 + 7 Unknown_SSD_Attribute 0x000b 100 100 050 Pre-fail Always - 0 + 8 Unknown_SSD_Attribute 0x0005 100 100 050 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 14370 + 10 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 7320 +167 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 +168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0 +169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 70 +170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 43 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +173 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 26280080 +175 Program_Fail_Count_Chip 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0012 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 5 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 137 +196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 2 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +218 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +233 Media_Wearout_Indicator 0x0013 100 100 000 Pre-fail Always - 14528931 +240 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0 +241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 8338138 +242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 7039109 +243 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 110382343808100 +244 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 144 +245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 401 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Kingston/SNS4151/SNS4151S316G/07FB035F48EF b/SSD/Kingston/SNS4151/SNS4151S316G/07FB035F48EF new file mode 100644 index 000000000..c3634d5dc --- /dev/null +++ b/SSD/Kingston/SNS4151/SNS4151S316G/07FB035F48EF @@ -0,0 +1,139 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SNS4151S316G +Serial Number: -- +Firmware Version: S9FM01.1 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 3 01:35:35 2020 AEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 30062 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 549 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute ------ 100 100 000 - 8 +170 Unknown_Attribute PO--C- 100 100 010 - 7 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--C- 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 31 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 1684300900 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +233 Media_Wearout_Indicator PO--C- 100 100 000 - 7752758 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 +241 Total_LBAs_Written -O--C- 100 100 000 - 3350538 +242 Total_LBAs_Read -O--C- 100 100 000 - 4541788 +243 Unknown_Attribute -O--C- 100 100 000 - 110382343808100 +244 Unknown_Attribute ------ 100 100 000 - 536 +245 Unknown_Attribute ------ 100 100 000 - 969 +246 Unknown_Attribute ------ 100 100 000 - 2244077 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 533 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Kingston/SUV/SUV500240G/B5E9033D95CE b/SSD/Kingston/SUV/SUV500240G/B5E9033D95CE new file mode 100644 index 000000000..b5fb4b99b --- /dev/null +++ b/SSD/Kingston/SUV/SUV500240G/B5E9033D95CE @@ -0,0 +1,111 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SUV500240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 003056RI +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 14:47:00 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 2798 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5791 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26 +100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 251008 +101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 47904 +170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 17 +175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 174 +178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 679 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 2 +187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0 +194 Temperature_Celsius 0x0022 030 100 000 Old_age Always - 30 (Min/Max 20/39) +195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 2798 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0 +201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0 +204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 2798 +231 Temperature_Celsius 0x0032 100 100 000 Old_age Always - 0 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 879 +234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 560 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 269 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 47 +250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 2798 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Kingston/SUV/SUV500240G/BFA04D58BE1F b/SSD/Kingston/SUV/SUV500240G/BFA04D58BE1F new file mode 100644 index 000000000..9d4425b04 --- /dev/null +++ b/SSD/Kingston/SUV/SUV500240G/BFA04D58BE1F @@ -0,0 +1,113 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SUV500240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 003056RA +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 14:46:10 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 46308 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3760 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4036 +100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3225904 +101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 451808 +170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2112 +175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 092 092 000 Old_age Always - 2265 +178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 745 +183 Runtime_Bad_Block 0x0032 095 095 000 Old_age Always - 20 +187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0 +194 Temperature_Celsius 0x0022 029 100 000 Old_age Always - 29 (Min/Max 14/45) +195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 46308 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0 +201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0 +204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 46308 +231 Temperature_Celsius 0x0032 092 092 000 Old_age Always - 8 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 9373 +234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5147 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 7808 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 4118 +250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 46311 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Kingston/SUV300/SUV300S37A240G/C62D39256F65 b/SSD/Kingston/SUV300/SUV300S37A240G/C62D39256F65 new file mode 100644 index 000000000..9af09180b --- /dev/null +++ b/SSD/Kingston/SUV300/SUV300S37A240G/C62D39256F65 @@ -0,0 +1,106 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: KINGSTON SUV300S37A240G +Serial Number: -- +Firmware Version: SAFM11.K +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 00:10:57 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 2 Not_In_Use 0x0005 100 100 050 Pre-fail Offline - 0 + 3 Not_In_Use 0x0007 100 100 050 Pre-fail Always - 0 + 5 Retired_Block_Count 0x0013 100 100 050 Pre-fail Always - 0 + 7 Not_In_Use 0x000b 100 100 050 Pre-fail Always - 0 + 8 Not_In_Use 0x0005 100 100 050 Pre-fail Offline - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 19384 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 41 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 100 100 010 Pre-fail Always - 0/265 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 73 (Average 31) +175 Not_In_Use 0x0013 100 100 050 Pre-fail Always - 0 +183 Unknown_Phison_Attr 0x0012 100 100 100 Old_age Always FAILING_NOW 4784159 +187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 24 +194 Temperature_Celsius 0x0023 069 055 030 Pre-fail Always - 31 (Min/Max 21/45) +196 Reallocated_Event_Count 0x0002 100 100 010 Old_age Always - 0 +197 Not_In_Use 0x0032 100 100 000 Old_age Always - 0 +199 SATA_CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 97 +233 Flash_Writes_GiB 0x000b 100 100 000 Pre-fail Always - 7491 +240 Not_In_Use 0x0013 100 100 000 Pre-fail Always - 0 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 29976 +242 Lifetime_Reads_GiB 0x0012 100 100 000 Old_age Always - 3402 +244 Average_Erase_Count 0x0002 100 100 000 Old_age Always - 31 +245 Max_Erase_Count 0x0002 100 100 000 Old_age Always - 73 +246 Total_Erase_Count 0x0012 100 100 000 Old_age Always - 2103808 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Kingston/SUV400/SUV400S37 120G/CC794A4A55F6 b/SSD/Kingston/SUV400/SUV400S37 120G/CC794A4A55F6 new file mode 100644 index 000000000..4f8ddbe1f --- /dev/null +++ b/SSD/Kingston/SUV400/SUV400S37 120G/CC794A4A55F6 @@ -0,0 +1,162 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SUV400S37 120G +Serial Number: -- +Firmware Version: 902XKR +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 13:22:21 2020 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 888 + 12 Power_Cycle_Count -O--CK 100 100 050 - 569 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 1 +164 Unknown_Attribute -O--CK 100 100 050 - 57391 +165 Unknown_Attribute -O--CK 100 100 050 - 342 +166 Unknown_Attribute -O--CK 100 100 050 - 3 +167 Unknown_Attribute -O--CK 100 100 050 - 45 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 196 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 39438 +242 Total_LBAs_Read ----CK 100 100 050 - 29884 +245 Unknown_Attribute -O--CK 100 100 050 - 37165 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 569 --- Lifetime Power-On Resets +0x01 0x010 4 888 --- Power-on Hours +0x01 0x018 6 2584608827 --- Logical Sectors Written +0x01 0x020 6 50296 --- Number of Write Commands +0x01 0x028 6 1958524788 --- Logical Sectors Read +0x01 0x030 6 37334 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 1 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Kingston/SUV400/SUV400S37240G/BAD907548417 b/SSD/Kingston/SUV400/SUV400S37240G/BAD907548417 new file mode 100644 index 000000000..8de5542b0 --- /dev/null +++ b/SSD/Kingston/SUV400/SUV400S37240G/BAD907548417 @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Kingston SSDNow UV400/500 +Device Model: KINGSTON SUV400S37240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 0C3G37R5 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Oct 31 20:04:09 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 1839 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 4877 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1349 +100 Unknown_Kingston_Attr -O--CK 100 100 000 - 6813264 +101 Unknown_Kingston_Attr -O--CK 100 100 000 - 922992 +170 Reserved_Block_Count -O--CK 100 100 000 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 137 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0 +177 Wear_Leveling_Count -O--CK 092 092 000 - 2957 +178 Used_Rsvd_Blk_Cnt_Chip -O---- 100 100 000 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O---- 100 100 000 - 792 +183 Runtime_Bad_Block -O--CK 094 094 000 - 31 +187 Reported_Uncorrect PO--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 029 100 000 - 29 (Min/Max 13/49) +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 1839 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +201 Unc_Read_Error_Rate -O--CK 100 100 000 - 0 +204 Soft_ECC_Correction -O--CK 100 100 000 - 1839 +231 SSD_Life_Left -O--CK 092 092 000 - 8 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 17843 +234 Unknown_Attribute -O--CK 100 100 000 - 7950 +241 Host_Writes_GiB -O--CK 100 100 000 - 11797 +242 Host_Reads_GiB -O--CK 100 100 000 - 8140 +250 Read_Retry_Count -O--CK 100 100 000 - 12699 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 5 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 9 Device vendor specific log +0xab SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 23/29 Celsius +Lifetime Min/Max Temperature: 13/49 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (309) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1349 --- Lifetime Power-On Resets +0x01 0x010 4 4877 --- Power-on Hours +0x01 0x018 6 24741011009 --- Logical Sectors Written +0x01 0x020 6 298162315 --- Number of Write Commands +0x01 0x028 6 17071999390 --- Logical Sectors Read +0x01 0x030 6 241758619 --- Number of Read Commands +0x01 0x038 6 17557987480 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10114 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 -D- Current Temperature +0x05 0x010 1 - -D- Average Short Term Temperature +0x05 0x018 1 0 -D- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 - -D- Highest Average Short Term Temperature +0x05 0x038 1 - -D- Lowest Average Short Term Temperature +0x05 0x040 1 - -D- Highest Average Long Term Temperature +0x05 0x048 1 - -D- Lowest Average Long Term Temperature +0x05 0x050 4 0 -D- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 -D- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 10114 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Kingston/SUV400/SUV400S37240G/C0313DC9C88B b/SSD/Kingston/SUV400/SUV400S37240G/C0313DC9C88B new file mode 100644 index 000000000..f08d57e25 --- /dev/null +++ b/SSD/Kingston/SUV400/SUV400S37240G/C0313DC9C88B @@ -0,0 +1,208 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Kingston SSDNow UV400/500 +Device Model: KINGSTON SUV400S37240G +Serial Number: -- +LU WWN Device Id: 0 550380 ... +Firmware Version: 0C3FD6SD +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Nov 1 16:00:04 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 33839 + 12 Power_Cycle_Count -O--CK 100 100 000 - 553 +100 Unknown_Kingston_Attr -O--CK 100 100 000 - 60070304 +101 Unknown_Kingston_Attr -O--CK 100 100 000 - 1812928 +170 Reserved_Block_Count -O--CK 100 100 000 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 306 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0 +177 Wear_Leveling_Count -O--CK 040 040 000 - 18049 +178 Used_Rsvd_Blk_Cnt_Chip -O---- 100 100 000 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O---- 100 100 000 - 1318 +183 Runtime_Bad_Block -O--CK 096 096 000 - 43 +187 Reported_Uncorrect PO--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 035 100 000 - 35 (Min/Max 16/55) +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +201 Unc_Read_Error_Rate -O--CK 100 100 000 - 0 +204 Soft_ECC_Correction -O--CK 100 100 000 - 0 +231 SSD_Life_Left -O--CK 050 050 000 - 50 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 106614 +234 Unknown_Attribute -O--CK 100 100 000 - 9970 +241 Host_Writes_GiB -O--CK 100 100 000 - 40234 +242 Host_Reads_GiB -O--CK 100 100 000 - 29417 +250 Read_Retry_Count -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 5 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 9 Device vendor specific log +0xab SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 22/39 Celsius +Lifetime Min/Max Temperature: 16/55 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (200) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 553 --- Lifetime Power-On Resets +0x01 0x010 4 33839 --- Power-on Hours +0x01 0x018 6 84377808376 --- Logical Sectors Written +0x01 0x020 6 2038764766 --- Number of Write Commands +0x01 0x028 6 61692926775 --- Logical Sectors Read +0x01 0x030 6 1403755363 --- Number of Read Commands +0x01 0x038 6 121823416110 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 3241 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 -D- Current Temperature +0x05 0x010 1 - -D- Average Short Term Temperature +0x05 0x018 1 0 -D- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 - -D- Highest Average Short Term Temperature +0x05 0x038 1 - -D- Lowest Average Short Term Temperature +0x05 0x040 1 - -D- Highest Average Long Term Temperature +0x05 0x048 1 - -D- Lowest Average Long Term Temperature +0x05 0x050 4 0 -D- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 -D- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3241 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 50 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SUV500/SUV500MS120G/2A70CE3BE58B b/SSD/Kingston/SUV500/SUV500MS120G/2A70CE3BE58B new file mode 100644 index 000000000..363d8a30c --- /dev/null +++ b/SSD/Kingston/SUV500/SUV500MS120G/2A70CE3BE58B @@ -0,0 +1,111 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SUV500MS120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 003056RI +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 14:35:40 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 1150 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12664 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 16 +100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 232520 +101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 13384 +170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 14 +175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 099 099 000 Old_age Always - 322 +178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 333 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 1 +187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0 +194 Temperature_Celsius 0x0022 053 100 000 Old_age Always - 53 (Min/Max 21/57) +195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 1150 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0 +201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0 +204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 1150 +231 Temperature_Celsius 0x0032 099 099 000 Old_age Always - 1 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 804 +234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 156 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 379 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 24 +250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 1150 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Kingston/SUV500/SUV500MS120G/CBEBAAD8A327 b/SSD/Kingston/SUV500/SUV500MS120G/CBEBAAD8A327 new file mode 100644 index 000000000..9c893fc38 --- /dev/null +++ b/SSD/Kingston/SUV500/SUV500MS120G/CBEBAAD8A327 @@ -0,0 +1,207 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SUV500MS120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 003056R6 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 22:10:58 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 19898 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 18552 + 12 Power_Cycle_Count -O--CK 100 100 000 - 18 +100 Unknown_Attribute -O--CK 100 100 000 - 3741640 +101 Unknown_Attribute -O--CK 100 100 000 - 75464 +170 Unknown_Attribute -O--CK 100 100 000 - 0 +171 Unknown_Attribute -O--CK 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute -O--CK 100 100 000 - 8 +175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0 +177 Wear_Leveling_Count -O--CK 082 082 000 - 5196 +178 Used_Rsvd_Blk_Cnt_Chip -O---- 100 100 000 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot -O---- 100 100 000 - 262 +183 Runtime_Bad_Block -O--CK 099 099 000 - 7 +187 Reported_Uncorrect PO--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 050 100 000 - 50 (Min/Max 20/56) +195 Hardware_ECC_Recovered -O--CK 100 100 000 - 19898 +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 +201 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 +204 Soft_ECC_Correction -O--CK 100 100 000 - 19898 +231 Temperature_Celsius -O--CK 082 082 000 - 18 +233 Media_Wearout_Indicator -O--CK 100 100 000 - 13699 +234 Unknown_Attribute -O--CK 100 100 000 - 884 +241 Total_LBAs_Written -O--CK 100 100 000 - 5670 +242 Total_LBAs_Read -O--CK 100 100 000 - 780 +250 Read_Error_Retry_Rate -O--CK 100 100 000 - 19898 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 5 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 9 Device vendor specific log +0xab SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 0 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 50 Celsius +Power Cycle Min/Max Temperature: 28/55 Celsius +Lifetime Min/Max Temperature: 20/56 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (413) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 18552 --- Power-on Hours +0x01 0x018 6 11892695495 --- Logical Sectors Written +0x01 0x020 6 578728873 --- Number of Write Commands +0x01 0x028 6 1636529163 --- Logical Sectors Read +0x01 0x030 6 43120475 --- Number of Read Commands +0x01 0x038 6 66787910970 --- Date and Time TimeStamp +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 254 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 50 -D- Current Temperature +0x05 0x010 1 49 -D- Average Short Term Temperature +0x05 0x018 1 49 -D- Average Long Term Temperature +0x05 0x020 1 56 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 52 -D- Highest Average Short Term Temperature +0x05 0x038 1 23 -D- Lowest Average Short Term Temperature +0x05 0x040 1 50 -D- Highest Average Long Term Temperature +0x05 0x048 1 23 -D- Lowest Average Long Term Temperature +0x05 0x050 4 0 -D- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 -D- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 254 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 18 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 92 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Kingston/SUV500/SUV500MS120G/D4B1F5E7CCD0 b/SSD/Kingston/SUV500/SUV500MS120G/D4B1F5E7CCD0 new file mode 100644 index 000000000..700be0ce2 --- /dev/null +++ b/SSD/Kingston/SUV500/SUV500MS120G/D4B1F5E7CCD0 @@ -0,0 +1,111 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SUV500MS120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 003056RI +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 14:29:43 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 906 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12811 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 +100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 246840 +101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 13752 +170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5 +175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 099 099 000 Old_age Always - 342 +178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 380 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 1 +187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0 +194 Temperature_Celsius 0x0022 042 100 000 Old_age Always - 42 (Min/Max 21/53) +195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 906 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0 +201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0 +204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 906 +231 Temperature_Celsius 0x0032 099 099 000 Old_age Always - 1 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 862 +234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 161 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 449 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 20 +250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 906 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Kingston/SUV500/SUV500MS240G/5E26F3088F64 b/SSD/Kingston/SUV500/SUV500MS240G/5E26F3088F64 new file mode 100644 index 000000000..498344a0d --- /dev/null +++ b/SSD/Kingston/SUV500/SUV500MS240G/5E26F3088F64 @@ -0,0 +1,111 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SUV500MS240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 003056RI +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 26 18:23:56 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 25454 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2953 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 175 +100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 97184 +101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 8416 +170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 51 +175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 67 +178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 711 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0 +194 Temperature_Celsius 0x0022 054 100 000 Old_age Always - 54 (Min/Max 14/60) +195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 25454 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0 +201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0 +204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 25454 +231 Temperature_Celsius 0x0032 100 100 000 Old_age Always - 0 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 237 +234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 103 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 112 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 105 +250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 25454 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Kingston/SUV500/SUV500MS240G/8138DED579CB b/SSD/Kingston/SUV500/SUV500MS240G/8138DED579CB new file mode 100644 index 000000000..f9e302451 --- /dev/null +++ b/SSD/Kingston/SUV500/SUV500MS240G/8138DED579CB @@ -0,0 +1,111 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SUV500MS240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 003056RI +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 19:47:30 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 1650 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12409 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 +100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 98224 +101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10816 +170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6 +175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 68 +178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 681 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0 +194 Temperature_Celsius 0x0022 051 100 000 Old_age Always - 51 (Min/Max 23/57) +195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 1650 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0 +201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0 +204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 1650 +231 Temperature_Celsius 0x0032 100 100 000 Old_age Always - 0 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 349 +234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 127 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 129 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 45 +250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 1650 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Kingston/SUV500/SUV500MS240G/DECA51F7FB2E b/SSD/Kingston/SUV500/SUV500MS240G/DECA51F7FB2E new file mode 100644 index 000000000..918944934 --- /dev/null +++ b/SSD/Kingston/SUV500/SUV500MS240G/DECA51F7FB2E @@ -0,0 +1,113 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: KINGSTON SUV500MS240G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 003056RI +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Oct 20 21:45:38 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 0) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 48 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 466649 + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 214 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 67 +100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 69280 +101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 12608 +170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 20 +175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 48 +178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 716 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0 +194 Temperature_Celsius 0x0022 049 100 000 Old_age Always - 49 (Min/Max 20/58) +195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 466649 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0 +201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0 +204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 466649 +231 Temperature_Celsius 0x0032 100 100 000 Old_age Always - 0 +233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 235 +234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 149 +241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 184 +242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 166 +250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 466710 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 0 +Warning: ATA Specification requires self-test log structure revision number = 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Kingston/SV300/SV300S37A120G/C60D095CB753 b/SSD/Kingston/SV300/SV300S37A120G/C60D095CB753 new file mode 100644 index 000000000..fba2d015c --- /dev/null +++ b/SSD/Kingston/SV300/SV300S37A120G/C60D095CB753 @@ -0,0 +1,201 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SV300S37A120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 60AABBF0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 5 09:45:30 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 094 094 000 - 6011h+21m+50.740s + 12 Power_Cycle_Count -O--CK 098 098 000 - 2639 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 467 +177 Wear_Range_Delta ------ 000 000 000 - 2 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +189 Airflow_Temperature_Cel ------ 030 047 000 - 30 (Min/Max 18/47) +194 Temperature_Celsius -O---K 030 047 000 - 30 (Min/Max 18/47) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 099 099 010 - 1 +233 SandForce_Internal -O--CK 000 000 000 - 3547 +234 SandForce_Internal -O--CK 000 000 000 - 3716 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 3716 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 4626 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 18/47 Celsius +Lifetime Min/Max Temperature: 18/63 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (103) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2639 --- Lifetime Power-On Resets +0x01 0x010 4 6011 --- Power-on Hours +0x01 0x018 6 7793302574 --- Logical Sectors Written +0x01 0x028 6 9702680944 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 31 --- Average Long Term Temperature +0x05 0x020 1 61 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 89 --- Number of Hardware Resets +0x06 0x010 4 6895 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Kingston/SV300/SV300S37A120G/DF7BA0A9A24B b/SSD/Kingston/SV300/SV300S37A120G/DF7BA0A9A24B new file mode 100644 index 000000000..69e54d5d6 --- /dev/null +++ b/SSD/Kingston/SV300/SV300S37A120G/DF7BA0A9A24B @@ -0,0 +1,100 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SV300S37A120G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 608ABBF0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Oct 30 14:44:41 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 095 095 050 Old_age Always - 2/48088601 + 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 + 9 Power_On_Hours_and_Msec 0x0032 083 083 000 Old_age Always - 15631h+34m+07.040s + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 265 +171 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 95 +177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 1 +181 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 +189 Airflow_Temperature_Cel 0x0000 032 041 000 Old_age Offline - 32 (Min/Max 13/41) +194 Temperature_Celsius 0x0022 032 041 000 Old_age Always - 32 (Min/Max 13/41) +195 ECC_Uncorr_Error_Count 0x001c 109 109 000 Old_age Offline - 2/48088601 +196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 +201 Unc_Soft_Read_Err_Rate 0x001c 109 109 000 Old_age Offline - 2/48088601 +204 Soft_ECC_Correct_Rate 0x001c 109 109 000 Old_age Offline - 2/48088601 +230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 +231 SSD_Life_Left 0x0000 099 099 011 Old_age Offline - 47244640257 +233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 7324 +234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 2494 +241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 2494 +242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 2832 +244 Unknown_Attribute 0x0000 099 099 010 Old_age Offline - 3538994 + +SMART Error Log not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Kingston/SV300/SV300S37A480G/9D43C106D51A b/SSD/Kingston/SV300/SV300S37A480G/9D43C106D51A new file mode 100644 index 000000000..43d7ed4a8 --- /dev/null +++ b/SSD/Kingston/SV300/SV300S37A480G/9D43C106D51A @@ -0,0 +1,202 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SV300S37A480G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 608ABBF0 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 14:11:12 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0/0 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 087 087 000 - 12031h+17m+39.500s + 12 Power_Cycle_Count -O--CK 100 100 000 - 691 +171 Program_Fail_Count -O-R-- 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 268 +177 Wear_Range_Delta ------ 000 000 000 - 1 +181 Program_Fail_Count -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +189 Airflow_Temperature_Cel ------ 031 042 000 - 31 (Min/Max 14/42) +194 Temperature_Celsius -O---K 031 042 000 - 31 (Min/Max 14/42) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left ------ 100 100 011 - 73014444032 +233 SandForce_Internal -O--CK 000 000 000 - 5373 +234 SandForce_Internal -O--CK 000 000 000 - 2956 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 2956 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 3234 +244 Unknown_Attribute ------ 100 100 010 - 2162697 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 14/42 Celsius +Lifetime Min/Max Temperature: 14/42 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/85 Celsius +Temperature History Size (Index): 478 (81) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 691 --- Lifetime Power-On Resets +0x01 0x010 4 12031 --- Power-on Hours +0x01 0x018 6 6200996325 --- Logical Sectors Written +0x01 0x028 6 6784180753 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 28 --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 33 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 30 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 0 --- Number of Hardware Resets +0x06 0x010 4 3289 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Kingston/SVP200/SVP200S37A60G/3077A09A1BD5 b/SSD/Kingston/SVP200/SVP200S37A60G/3077A09A1BD5 new file mode 100644 index 000000000..a29471f11 --- /dev/null +++ b/SSD/Kingston/SVP200/SVP200S37A60G/3077A09A1BD5 @@ -0,0 +1,161 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: KINGSTON SVP200S37A60G +Serial Number: -- +LU WWN Device Id: 5 0026b7 ... +Firmware Version: 502ABBF0 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 27 08:34:50 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 64 (intermediate level with standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 110 110 050 - 0/39367491 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 9057h+43m+54.180s + 12 Power_Cycle_Count -O--CK 100 100 000 - 931 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 120 +177 Wear_Range_Delta ------ 000 000 000 - 3 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 021 079 000 - 21 (Min/Max 11/79) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/39367491 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/39367491 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/39367491 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 100 100 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 1884 +234 SandForce_Internal -O--CK 000 000 000 - 2306 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 2306 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 1344 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 0 +SMART Log Directory Version 0 +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 21 Celsius +Power Cycle Min/Max Temperature: 21/30 Celsius +Lifetime Min/Max Temperature: 11/79 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 0 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/ 0 Celsius +Min/Max Temperature Limit: 0/ 0 Celsius +Temperature History Size (Index): 0 (393) +Temperature History is empty + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/Lexar/256/256GB SSD/5B897C49F5CB b/SSD/Lexar/256/256GB SSD/5B897C49F5CB new file mode 100644 index 000000000..33aa7d157 --- /dev/null +++ b/SSD/Lexar/256/256GB SSD/5B897C49F5CB @@ -0,0 +1,123 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Lexar 256GB SSD +Serial Number: -- +LU WWN Device Id: 5 02b2a2 ... +Add. Product Id: mavlsata +Firmware Version: V4.9 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 20 13:15:10 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x35) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 5 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours PO--CK 100 100 010 - 152 + 12 Power_Cycle_Count PO--CK 100 100 010 - 56 +161 Unknown_Attribute PO--CK 100 100 010 - 0 +164 Unknown_Attribute PO--CK 100 100 010 - 1292 +165 Unknown_Attribute PO--CK 100 100 010 - 3 +166 Unknown_Attribute PO--CK 100 100 010 - 0 +167 Unknown_Attribute PO--CK 100 100 010 - 2 +169 Unknown_Attribute PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--CK 100 100 010 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 +192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 +194 Temperature_Celsius PO--CK 100 100 010 - 48 +195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 +199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 +241 Total_LBAs_Written PO--CK 100 100 010 - 259 +242 Total_LBAs_Read PO--CK 100 100 010 - 158 +243 Unknown_Attribute PO--CK 100 100 010 - 0 +244 Unknown_Attribute PO--CK 100 100 010 - 0 +245 Unknown_Attribute PO--CK 100 100 010 - 0 +246 Unknown_Attribute PO--CK 100 100 010 - 0 +248 Unknown_Attribute PO--CK 100 100 010 - 0 +250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 +251 Unknown_Attribute PO--CK 100 100 010 - 0 +252 Unknown_Attribute PO--CK 100 100 010 - 0 +253 Unknown_Attribute PO--CK 100 100 010 - 0 +254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test Log not supported + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Lite-On/CV8/CV8-8E256-11 SATA 256GB/F8114A66B65F b/SSD/Lite-On/CV8/CV8-8E256-11 SATA 256GB/F8114A66B65F new file mode 100644 index 000000000..ed6ba6b27 --- /dev/null +++ b/SSD/Lite-On/CV8/CV8-8E256-11 SATA 256GB/F8114A66B65F @@ -0,0 +1,184 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: LITEON CV8-8E256-11 SATA 256GB +Serial Number: -- +LU WWN Device Id: 5 002303 ... +Firmware Version: C28110B +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Sep 20 16:36:59 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 41) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 15) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0 + 9 Power_On_Hours -O---- 100 100 000 - 3455 + 12 Power_Cycle_Count PO---- 100 100 000 - 1040 +175 Program_Fail_Count_Chip PO---- 100 100 000 - 0 +176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0 +177 Wear_Leveling_Count PO---- 100 100 000 - 18 +178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO---- 100 100 005 - 81 +181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 +182 Erase_Fail_Count_Total PO---- 100 100 000 - 0 +187 Reported_Uncorrect PO---- 100 100 000 - 0 +194 Temperature_Celsius -O---- 100 100 000 - 29 +195 Hardware_ECC_Recovered PO---- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0 +238 Unknown_Attribute PO---- 100 100 000 - 100 +241 Total_LBAs_Written PO---- 100 100 000 - 5165394535 +242 Total_LBAs_Read PO---- 100 100 000 - 4662069654 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 90% 296 - +# 2 Short offline Interrupted (host reset) 90% 99 - +# 3 Short offline Completed without error 00% 96 - +# 4 Short offline Completed without error 00% 91 - +# 5 Short offline Completed without error 00% 83 - +# 6 Short offline Completed without error 00% 3 - +# 7 Short offline Interrupted (host reset) 90% 2 - +# 8 Short offline Completed without error 00% 0 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 25/25 Celsius +Lifetime Min/Max Temperature: 0/32 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/100 Celsius +Min/Max Temperature Limit: 0/100 Celsius +Temperature History Size (Index): 128 (45) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1040 --- Lifetime Power-On Resets +0x01 0x010 4 3455 --- Power-on Hours +0x01 0x018 6 870427239 --- Logical Sectors Written +0x01 0x020 6 54444353 --- Number of Write Commands +0x01 0x028 6 367102358 --- Logical Sectors Read +0x01 0x030 6 51135978 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 46325 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (invalid page 0x1d in header) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3169 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Lite-On/LCH-256/LCH-256V2S/1AE30F48EB6D b/SSD/Lite-On/LCH-256/LCH-256V2S/1AE30F48EB6D new file mode 100644 index 000000000..fb520990f --- /dev/null +++ b/SSD/Lite-On/LCH-256/LCH-256V2S/1AE30F48EB6D @@ -0,0 +1,88 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: LITEON LCH-256V2S +Serial Number: -- +LU WWN Device Id: 5 002303 ... +Firmware Version: 3C87902 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 19:56:27 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 294 + 12 Power_Cycle_Count 0x0003 100 100 000 Pre-fail Always - 569 +170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +171 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 0 +172 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 0 +173 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 52 +174 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 253 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0003 100 100 000 Pre-fail Always - 143 +184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0 +194 Temperature_Celsius 0x0002 100 100 000 Old_age Always - 45 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 +233 Media_Wearout_Indicator 0x0003 100 100 000 Pre-fail Always - 16777215 +241 Total_LBAs_Written 0x0003 100 100 000 Pre-fail Always - 8992 +242 Total_LBAs_Read 0x0003 100 100 000 Pre-fail Always - 553 +249 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 11007 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +Selective Self-tests/Logging not supported + + + diff --git a/SSD/Lite-On/LCS-128/LCS-128M6S-HP/2D86F5EEDBE4 b/SSD/Lite-On/LCS-128/LCS-128M6S-HP/2D86F5EEDBE4 new file mode 100644 index 000000000..7d7a484b3 --- /dev/null +++ b/SSD/Lite-On/LCS-128/LCS-128M6S-HP/2D86F5EEDBE4 @@ -0,0 +1,85 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: LITEONIT LCS-128M6S-HP +Serial Number: -- +LU WWN Device Id: 5 002303 ... +Firmware Version: DC71704 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 18:41:00 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 10) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x002f 100 100 070 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2953 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1502 +170 Unknown_Attribute 0x0033 100 100 000 Pre-fail Always - 0 +171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 +173 Unknown_Attribute 0x0033 100 100 000 Pre-fail Always - 503010 +174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 220 +183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 +184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 000 Old_age Always - 1850 +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 0 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 54536 - +# 2 Short offline Completed without error 00% 0 - + +Selective Self-tests/Logging not supported + diff --git a/SSD/Micron/1100/1100 SATA 256GB/D6FA6B783462 b/SSD/Micron/1100/1100 SATA 256GB/D6FA6B783462 new file mode 100644 index 000000000..decd3967c --- /dev/null +++ b/SSD/Micron/1100/1100 SATA 256GB/D6FA6B783462 @@ -0,0 +1,219 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Micron 1100 SATA 256GB +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0DL003 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 14:27:22 2020 +08 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 678) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 010 - 2 + 9 Power_On_Hours -O--CK 100 100 000 - 536 + 12 Power_Cycle_Count PO--CK 100 100 001 - 969 +181 Program_Fail_Cnt_Total PO--CK 100 100 001 - 0 +182 Erase_Fail_Count_Total PO--CK 100 100 001 - 0 +177 Wear_Leveling_Count PO--CK 096 096 010 - 60 +187 Reported_Uncorrect PO--CK 100 100 001 - 0 +194 Temperature_Celsius -O---K 048 034 000 - 52 (Min/Max 13/66) +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +238 Unknown_Attribute ----CK 096 096 000 - 4 +175 Program_Fail_Count_Chip PO--CK 100 100 000 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 000 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 000 - 1 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2043 +195 Cumulativ_Corrected_ECC POSR-K 100 000 050 Past 0 +241 Total_LBAs_Written PO--CK 100 100 000 - 14731613003 +242 Total_LBAs_Read PO--CK 100 100 000 - 10873621325 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 2 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 354 - +# 2 Short offline Completed without error 00% 332 - +# 3 Short offline Completed without error 00% 299 - +# 4 Short offline Completed without error 00% 233 - +# 5 Short offline Completed without error 00% 232 - +# 6 Short offline Completed without error 00% 213 - +# 7 Short offline Completed without error 00% 211 - +# 8 Short offline Completed without error 00% 183 - +# 9 Short offline Completed without error 00% 179 - +#10 Short offline Completed without error 00% 179 - +#11 Extended offline Completed without error 00% 171 - +#12 Conveyance offline Aborted by host 00% 171 - +#13 Extended offline Aborted by host 00% 171 - +#14 Short offline Completed without error 00% 106 - +#15 Short offline Completed without error 00% 100 - +#16 Short offline Completed without error 00% 99 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 52 Celsius +Power Cycle Min/Max Temperature: 23/58 Celsius +Lifetime Min/Max Temperature: 13/66 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (236) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 969 --- Lifetime Power-On Resets +0x01 0x010 4 536 --- Power-on Hours +0x01 0x018 6 14731613003 --- Logical Sectors Written +0x01 0x020 6 214099122 --- Number of Write Commands +0x01 0x028 6 10873621325 --- Logical Sectors Read +0x01 0x030 6 145493079 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 972 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 52 --- Current Temperature +0x05 0x010 1 48 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 66 --- Highest Temperature +0x05 0x028 1 13 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 46 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 11091 --- Number of Hardware Resets +0x06 0x010 4 277 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Micron/1100/1100 SATA 512GB/6467DB653292 b/SSD/Micron/1100/1100 SATA 512GB/6467DB653292 new file mode 100644 index 000000000..6de7573ba --- /dev/null +++ b/SSD/Micron/1100/1100 SATA 512GB/6467DB653292 @@ -0,0 +1,220 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Micron 1100 SATA 512GB +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0DL022 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 5 10:55:28 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1357) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 879 + 12 Power_Cycle_Count PO--CK 100 100 001 - 1214 +181 Program_Fail_Cnt_Total PO--CK 100 100 001 - 0 +182 Erase_Fail_Count_Total PO--CK 100 100 001 - 0 +177 Wear_Leveling_Count PO--CK 099 099 010 - 19 +187 Reported_Uncorrect PO--CK 100 100 001 - 0 +194 Temperature_Celsius -O---K 070 026 000 - 30 (Min/Max 10/74) +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +238 Unknown_Attribute ----CK 099 099 000 - 1 +175 Program_Fail_Count_Chip PO--CK 100 100 000 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 000 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 000 - 0 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2458 +195 Cumulativ_Corrected_ECC POSR-K 100 000 050 Past 0 +241 Total_LBAs_Written PO--CK 100 100 000 - 8758374980 +242 Total_LBAs_Read PO--CK 100 100 000 - 6328956429 +179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 649 - +# 2 Short offline Completed without error 00% 648 - +# 3 Short offline Completed without error 00% 617 - +# 4 Short offline Completed without error 00% 597 - +# 5 Short offline Completed without error 00% 553 - +# 6 Short offline Completed without error 00% 552 - +# 7 Short offline Completed without error 00% 551 - +# 8 Vendor (0xff) Completed without error 00% 508 - +# 9 Vendor (0xff) Completed without error 00% 451 - +#10 Short offline Completed without error 00% 70 - +#11 Short offline Completed without error 00% 5 - +#12 Short offline Completed without error 00% 5 - +#13 Short offline Completed without error 00% 5 - +#14 Short offline Self-test routine in progress 90% 5 - +#15 Extended offline Completed without error 00% 3 - +#16 Short offline Completed without error 00% 3 - +#17 Short offline Completed without error 00% 2 - +#18 Short offline Completed without error 00% 2 - +#19 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 24/31 Celsius +Lifetime Min/Max Temperature: 10/74 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (443) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1214 --- Lifetime Power-On Resets +0x01 0x010 4 879 --- Power-on Hours +0x01 0x018 6 8758374980 --- Logical Sectors Written +0x01 0x020 6 127985915 --- Number of Write Commands +0x01 0x028 6 6328956429 --- Logical Sectors Read +0x01 0x030 6 71469861 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1479 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 39 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 74 --- Highest Temperature +0x05 0x028 1 10 --- Lowest Temperature +0x05 0x030 1 44 --- Highest Average Short Term Temperature +0x05 0x038 1 36 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4704 --- Number of Hardware Resets +0x06 0x010 4 382 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Micron/1100/1100_MTFDDAK256TBN/609D16207464 b/SSD/Micron/1100/1100_MTFDDAK256TBN/609D16207464 new file mode 100644 index 000000000..4238ec16d --- /dev/null +++ b/SSD/Micron/1100/1100_MTFDDAK256TBN/609D16207464 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Micron_1100_MTFDDAK256TBN +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0MU031 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 12:38:42 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x04) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 485) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 16503 + 12 Power_Cycle_Count -O--CK 100 100 000 - 10 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 066 066 000 - 510 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 5 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 068 055 000 - 32 (Min/Max 19/45) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 066 066 001 - 34 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 136065055136 +247 Host_Program_Page_Count -O--CK 100 100 000 - 4255560446 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1711415471 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2062 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 16500 - +# 2 Vendor (0xff) Completed without error 00% 16379 - +# 3 Vendor (0xff) Completed without error 00% 16164 - +# 4 Vendor (0xff) Completed without error 00% 15956 - +# 5 Vendor (0xff) Completed without error 00% 15752 - +# 6 Vendor (0xff) Completed without error 00% 15559 - +# 7 Vendor (0xff) Completed without error 00% 15368 - +# 8 Vendor (0xff) Completed without error 00% 15180 - +# 9 Vendor (0xff) Completed without error 00% 14951 - +#10 Vendor (0xff) Completed without error 00% 14758 - +#11 Vendor (0xff) Completed without error 00% 14533 - +#12 Vendor (0xff) Completed without error 00% 14334 - +#13 Vendor (0xff) Completed without error 00% 14128 - +#14 Vendor (0xff) Completed without error 00% 13936 - +#15 Vendor (0xff) Completed without error 00% 13749 - +#16 Vendor (0xff) Completed without error 00% 13552 - +#17 Vendor (0xff) Completed without error 00% 13357 - +#18 Vendor (0xff) Completed without error 00% 13174 - +#19 Vendor (0xff) Completed without error 00% 12970 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 20/43 Celsius +Lifetime Min/Max Temperature: 19/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (11) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 10 --- Lifetime Power-On Resets +0x01 0x010 4 16503 --- Power-on Hours +0x01 0x018 6 136065055136 --- Logical Sectors Written +0x01 0x020 6 1687397789 --- Number of Write Commands +0x01 0x028 6 6604262413 --- Logical Sectors Read +0x01 0x030 6 2633520698 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 30 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 253 --- Number of Hardware Resets +0x06 0x010 4 81 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 34 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 218 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Micron/1100/1100_MTFDDAK256TBN/DC991C0655B5 b/SSD/Micron/1100/1100_MTFDDAK256TBN/DC991C0655B5 new file mode 100644 index 000000000..d35c125fe --- /dev/null +++ b/SSD/Micron/1100/1100_MTFDDAK256TBN/DC991C0655B5 @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Micron_1100_MTFDDAK256TBN +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0MU031 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 12:38:42 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 801) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 16504 + 12 Power_Cycle_Count -O--CK 100 100 000 - 10 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 067 067 000 - 507 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 5 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 070 054 000 - 30 (Min/Max 19/46) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 067 067 001 - 33 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 135564941255 +247 Host_Program_Page_Count -O--CK 100 100 000 - 4239929570 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 1705109243 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2060 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 16486 - +# 2 Vendor (0xff) Completed without error 00% 16242 - +# 3 Vendor (0xff) Completed without error 00% 16024 - +# 4 Vendor (0xff) Completed without error 00% 15823 - +# 5 Vendor (0xff) Completed without error 00% 15631 - +# 6 Vendor (0xff) Completed without error 00% 15455 - +# 7 Vendor (0xff) Completed without error 00% 15295 - +# 8 Vendor (0xff) Completed without error 00% 15088 - +# 9 Vendor (0xff) Completed without error 00% 14866 - +#10 Vendor (0xff) Completed without error 00% 14668 - +#11 Vendor (0xff) Completed without error 00% 14474 - +#12 Vendor (0xff) Completed without error 00% 14272 - +#13 Vendor (0xff) Completed without error 00% 14087 - +#14 Vendor (0xff) Completed without error 00% 13881 - +#15 Vendor (0xff) Completed without error 00% 13695 - +#16 Vendor (0xff) Completed without error 00% 13502 - +#17 Vendor (0xff) Completed without error 00% 13323 - +#18 Vendor (0xff) Completed without error 00% 13141 - +#19 Vendor (0xff) Completed without error 00% 12966 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Completed [00% left] (294021670-294087205) + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 20/44 Celsius +Lifetime Min/Max Temperature: 19/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (464) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 10 --- Lifetime Power-On Resets +0x01 0x010 4 16504 --- Power-on Hours +0x01 0x018 6 135564941255 --- Logical Sectors Written +0x01 0x020 6 1689432493 --- Number of Write Commands +0x01 0x028 6 7121375215 --- Logical Sectors Read +0x01 0x030 6 2637131206 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 10 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 31 --- Highest Average Short Term Temperature +0x05 0x038 1 30 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 253 --- Number of Hardware Resets +0x06 0x010 4 81 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 33 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 218 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Micron/1100/1100_MTFDDAK512TBN/891C76D898A2 b/SSD/Micron/1100/1100_MTFDDAK512TBN/891C76D898A2 new file mode 100644 index 000000000..4ccd89d25 --- /dev/null +++ b/SSD/Micron/1100/1100_MTFDDAK512TBN/891C76D898A2 @@ -0,0 +1,224 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Micron_1100_MTFDDAK512TBN +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0MU031 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 06:36:15 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x04) Offline data collection activity + was suspended by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 839) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 6) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 19161 + 12 Power_Cycle_Count -O--CK 100 100 000 - 7 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 068 068 000 - 488 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 4 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 067 053 000 - 33 (Min/Max 23/47) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 068 068 001 - 32 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 223519330757 +247 Host_Program_Page_Count -O--CK 100 100 000 - 7493147623 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 2459704294 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2475 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 19154 - +# 2 Vendor (0xff) Completed without error 00% 19053 - +# 3 Vendor (0xff) Completed without error 00% 18808 - +# 4 Vendor (0xff) Completed without error 00% 18568 - +# 5 Vendor (0xff) Completed without error 00% 18337 - +# 6 Vendor (0xff) Completed without error 00% 18094 - +# 7 Vendor (0xff) Completed without error 00% 17843 - +# 8 Vendor (0xff) Completed without error 00% 17603 - +# 9 Vendor (0xff) Completed without error 00% 17368 - +#10 Vendor (0xff) Completed without error 00% 17130 - +#11 Vendor (0xff) Completed without error 00% 16879 - +#12 Vendor (0xff) Completed without error 00% 16633 - +#13 Vendor (0xff) Completed without error 00% 16412 - +#14 Vendor (0xff) Completed without error 00% 16195 - +#15 Vendor (0xff) Completed without error 00% 15982 - +#16 Vendor (0xff) Completed without error 00% 15767 - +#17 Vendor (0xff) Completed without error 00% 15530 - +#18 Vendor (0xff) Completed without error 00% 15304 - +#19 Vendor (0xff) Completed without error 00% 15092 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: SMART Off-line Data Collection executing in background (4) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 23/47 Celsius +Lifetime Min/Max Temperature: 23/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (283) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 19161 --- Power-on Hours +0x01 0x018 6 223519330757 --- Logical Sectors Written +0x01 0x020 6 3104819250 --- Number of Write Commands +0x01 0x028 6 15884400666 --- Logical Sectors Read +0x01 0x030 6 2808674537 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 28 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 28 --- Highest Average Short Term Temperature +0x05 0x038 1 28 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 104 --- Number of Hardware Resets +0x06 0x010 4 31 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 32 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 87 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Micron/1100/1100_MTFDDAK512TBN/8F8C02B7B158 b/SSD/Micron/1100/1100_MTFDDAK512TBN/8F8C02B7B158 new file mode 100644 index 000000000..0e5b6b9a8 --- /dev/null +++ b/SSD/Micron/1100/1100_MTFDDAK512TBN/8F8C02B7B158 @@ -0,0 +1,226 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Micron_1100_MTFDDAK512TBN +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: M0MU031 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 06:36:15 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1272) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 7) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 19162 + 12 Power_Cycle_Count -O--CK 100 100 000 - 7 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 068 068 000 - 487 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 4 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 070 051 000 - 30 (Min/Max 23/49) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 068 068 001 - 32 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 223937118229 +247 Host_Program_Page_Count -O--CK 100 100 000 - 7502198999 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 2453047262 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2479 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 8000 Current Device Internal Status Data log +0x25 GPL R/O 8000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 35328 Device vendor specific log +0xa1 GPL,SL VS 3 Device vendor specific log +0xa2 GPL,SL VS 1 Device vendor specific log +0xa3 GPL VS 13824 Device vendor specific log +0xa4 GPL VS 354 Device vendor specific log +0xa4 SL VS 98 Device vendor specific log +0xa5 GPL VS 8000 Device vendor specific log +0xa5 SL VS 64 Device vendor specific log +0xa6 GPL VS 8000 Device vendor specific log +0xa6 SL VS 64 Device vendor specific log +0xa7-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Vendor (0xff) Completed without error 00% 19150 - +# 2 Vendor (0xff) Completed without error 00% 18913 - +# 3 Vendor (0xff) Completed without error 00% 18662 - +# 4 Vendor (0xff) Completed without error 00% 18411 - +# 5 Vendor (0xff) Completed without error 00% 18166 - +# 6 Vendor (0xff) Completed without error 00% 17923 - +# 7 Vendor (0xff) Completed without error 00% 17669 - +# 8 Vendor (0xff) Completed without error 00% 17416 - +# 9 Vendor (0xff) Completed without error 00% 17175 - +#10 Vendor (0xff) Completed without error 00% 16927 - +#11 Vendor (0xff) Completed without error 00% 16680 - +#12 Vendor (0xff) Completed without error 00% 16454 - +#13 Vendor (0xff) Completed without error 00% 16245 - +#14 Vendor (0xff) Completed without error 00% 16030 - +#15 Vendor (0xff) Completed without error 00% 15795 - +#16 Vendor (0xff) Completed without error 00% 15573 - +#17 Vendor (0xff) Completed without error 00% 15353 - +#18 Vendor (0xff) Completed without error 00% 15139 - +#19 Vendor (0xff) Completed without error 00% 14922 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Completed [00% left] (130625-196160) + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 23/49 Celsius +Lifetime Min/Max Temperature: 23/49 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (255) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7 --- Lifetime Power-On Resets +0x01 0x010 4 19162 --- Power-on Hours +0x01 0x018 6 223937118229 --- Logical Sectors Written +0x01 0x020 6 3103185662 --- Number of Write Commands +0x01 0x028 6 15869954023 --- Logical Sectors Read +0x01 0x030 6 2826459999 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 29 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 29 --- Highest Average Short Term Temperature +0x05 0x038 1 29 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 104 --- Number of Hardware Resets +0x06 0x010 4 31 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 32 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 87 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Micron/M600/M600_MTFDDAK256MBF/C69EAB9B1B3C b/SSD/Micron/M600/M600_MTFDDAK256MBF/C69EAB9B1B3C new file mode 100644 index 000000000..67100c925 --- /dev/null +++ b/SSD/Micron/M600/M600_MTFDDAK256MBF/C69EAB9B1B3C @@ -0,0 +1,218 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs +Device Model: Micron_M600_MTFDDAK256MBF +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: MU05 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 27 08:23:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 978) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 6) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x0035) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 + 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 39756 + 12 Power_Cycle_Count -O--CK 100 100 000 - 21 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Ave_Block-Erase_Count -O--CK 058 058 000 - 1267 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 8 +180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 1947 +183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 +184 Error_Correction_Count -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 068 045 000 - 32 (Min/Max 23/55) +196 Reallocated_Event_Count -O--CK 100 100 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +202 Percent_Lifetime_Remain ----CK 058 058 001 - 42 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 +210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 +246 Total_LBAs_Written -O--CK 100 100 000 - 115882741020 +247 Host_Program_Page_Count -O--CK 100 100 000 - 3646047506 +248 FTL_Program_Page_Count -O--CK 100 100 000 - 11122225002 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x24 GPL R/O 16000 Current Device Internal Status Data log +0x25 GPL R/O 16000 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xbf GPL,SL VS 1 Device vendor specific log +0xc0 GPL,SL VS 80 Device vendor specific log +0xc1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 39750 - +# 2 Short offline Completed without error 00% 39726 - +# 3 Short offline Completed without error 00% 39702 - +# 4 Short offline Completed without error 00% 39678 - +# 5 Short offline Completed without error 00% 39654 - +# 6 Extended offline Completed without error 00% 39631 - +# 7 Short offline Completed without error 00% 39630 - +# 8 Short offline Completed without error 00% 39606 - +# 9 Short offline Completed without error 00% 39581 - +#10 Short offline Completed without error 00% 39557 - +#11 Short offline Completed without error 00% 39533 - +#12 Short offline Completed without error 00% 39509 - +#13 Short offline Completed without error 00% 39485 - +#14 Extended offline Completed without error 00% 39462 - +#15 Short offline Completed without error 00% 39461 - +#16 Short offline Completed without error 00% 39437 - +#17 Short offline Completed without error 00% 39413 - +#18 Short offline Completed without error 00% 39388 - +#19 Short offline Completed without error 00% 39364 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Completed [00% left] (57881389-57946924) + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 29/32 Celsius +Lifetime Min/Max Temperature: 23/55 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (194) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 21 --- Lifetime Power-On Resets +0x01 0x010 4 39756 --- Power-on Hours +0x01 0x018 6 115882741020 --- Logical Sectors Written +0x01 0x020 6 662996463 --- Number of Write Commands +0x01 0x028 6 3732408215 --- Logical Sectors Read +0x01 0x030 6 175499370 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 19 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 39 --- Average Long Term Temperature +0x05 0x020 1 55 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 46 --- Highest Average Short Term Temperature +0x05 0x038 1 37 --- Lowest Average Short Term Temperature +0x05 0x040 1 43 --- Highest Average Long Term Temperature +0x05 0x048 1 39 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 313 --- Number of Hardware Resets +0x06 0x010 4 117 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 42 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 75 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Micron/MTFDDAK256/MTFDDAK256MAM-1K12/33DAAD77F144 b/SSD/Micron/MTFDDAK256/MTFDDAK256MAM-1K12/33DAAD77F144 new file mode 100644 index 000000000..9e0af44a5 --- /dev/null +++ b/SSD/Micron/MTFDDAK256/MTFDDAK256MAM-1K12/33DAAD77F144 @@ -0,0 +1,198 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Crucial/Micron RealSSD m4/C400/P400 +Device Model: MTFDDAK256MAM-1K12 +Serial Number: -- +LU WWN Device Id: 5 00a075 ... +Firmware Version: 08TH +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 22 10:50:42 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 0 (reserved) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1190) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 19) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 26 + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 4096 + 9 Power_On_Hours -O--CK 100 100 000 - 1250 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5061 +170 Grown_Failing_Block_Ct PO--CK 100 100 010 - 1 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 91 +173 Wear_Leveling_Count PO--CK 096 096 010 - 133 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 80 +181 Non4k_Aligned_Access -O---K 100 100 000 - 8635 2617 6017 +183 SATA_Iface_Downshift -O--CK 100 100 000 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +189 Factory_Bad_Block_Ct -OSR-- 100 100 000 - 107 +194 Temperature_Celsius -O---K 100 100 000 - 0 +195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 22870 +196 Reallocated_Event_Count -O--CK 100 100 000 - 1 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1 +202 Perc_Rated_Life_Used ---RC- 096 096 000 - 4 +206 Write_Error_Rate -OSR-- 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 16383 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 255 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x83 SL R/W 1 Host vendor specific log +0x84-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL VS 2000 Device vendor specific log +0xa0 SL VS 208 Device vendor specific log +0xa1-0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 0 Celsius +Power Cycle Min/Max Temperature: --/ 0 Celsius +Lifetime Min/Max Temperature: --/ 0 Celsius + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -5/75 Celsius +Temperature History Size (Index): 478 (303) + +SCT Error Recovery Control: + Read: 40 (4.0 seconds) + Write: 40 (4.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 5061 --- Lifetime Power-On Resets +0x01 0x010 4 1250 --- Power-on Hours +0x01 0x018 6 24457578352 --- Logical Sectors Written +0x01 0x020 6 532854465 --- Number of Write Commands +0x01 0x028 6 40760249138 --- Logical Sectors Read +0x01 0x030 6 943321724 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 0 --- Current Temperature +0x05 0x010 1 0 --- Average Short Term Temperature +0x05 0x018 1 0 --- Average Long Term Temperature +0x05 0x020 1 0 --- Highest Temperature +0x05 0x028 1 0 --- Lowest Temperature +0x05 0x030 1 0 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 0 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 - --- Time in Over-Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x060 4 - --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 86 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Mushkin/MKNSSDSR/MKNSSDSR120GB/2C1AF67A0ACC b/SSD/Mushkin/MKNSSDSR/MKNSSDSR120GB/2C1AF67A0ACC new file mode 100644 index 000000000..f5af5c1a6 --- /dev/null +++ b/SSD/Mushkin/MKNSSDSR/MKNSSDSR120GB/2C1AF67A0ACC @@ -0,0 +1,149 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MKNSSDSR120GB +Serial Number: -- +LU WWN Device Id: 5 888914 ... +Firmware Version: R0522A0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Jul 26 20:39:37 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 94 + 12 Power_Cycle_Count -O--CK 100 100 050 - 303 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 34 +164 Unknown_Attribute -O--CK 100 100 050 - 3646 +165 Unknown_Attribute -O--CK 100 100 050 - 10 +166 Unknown_Attribute -O--CK 100 100 050 - 2 +167 Unknown_Attribute -O--CK 100 100 050 - 7 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 106 +194 Temperature_Celsius -O---K 100 100 050 - 33 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 9802 +242 Total_LBAs_Read ----CK 100 100 050 - 2858 +245 Unknown_Attribute -O--CK 100 100 050 - 1872 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 303 --- Lifetime Power-On Resets +0x01 0x010 4 94 --- Power-on Hours +0x01 0x018 6 642441091 --- Logical Sectors Written +0x01 0x020 6 0 --- Number of Write Commands +0x01 0x028 6 187363304 --- Logical Sectors Read +0x01 0x030 6 660 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 4 R_ERR response for non-data FIS +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/Mushkin/MKNSSDTR/MKNSSDTR1TB-3DL/8E6DF242A9AE b/SSD/Mushkin/MKNSSDTR/MKNSSDTR1TB-3DL/8E6DF242A9AE new file mode 100644 index 000000000..a42d60126 --- /dev/null +++ b/SSD/Mushkin/MKNSSDTR/MKNSSDTR1TB-3DL/8E6DF242A9AE @@ -0,0 +1,151 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MKNSSDTR1TB-3DL +Serial Number: -- +Firmware Version: Q0929B0 +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 27 21:16:01 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 17628 + 12 Power_Cycle_Count -O--CK 100 100 050 - 1026 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 30 +164 Unknown_Attribute -O--CK 100 100 050 - 107040 +165 Unknown_Attribute -O--CK 100 100 050 - 227 +166 Unknown_Attribute -O--CK 100 100 050 - 135 +167 Unknown_Attribute -O--CK 100 100 050 - 207 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 98 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 143 +194 Temperature_Celsius -O---K 100 100 050 - 39 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 15119312 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 1585790 +242 Total_LBAs_Read ----CK 100 100 050 - 3291026 +245 Unknown_Attribute -O--CK 100 100 050 - 2250369 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 30% 8771 - +# 2 Short offline Aborted by host 30% 8771 - +# 3 Short offline Completed without error 00% 21 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1026 --- Lifetime Power-On Resets +0x01 0x010 4 17628 --- Power-on Hours +0x01 0x018 6 847161448 --- Logical Sectors Written +0x01 0x020 6 61215 --- Number of Write Commands +0x01 0x028 6 932378739 --- Logical Sectors Read +0x01 0x030 6 20380 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/MyDigitalSSD/SB/SB2/7619BA39920A b/SSD/MyDigitalSSD/SB/SB2/7619BA39920A new file mode 100644 index 000000000..54d75ade0 --- /dev/null +++ b/SSD/MyDigitalSSD/SB/SB2/7619BA39920A @@ -0,0 +1,154 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SB2 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMB1.1 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 2 00:20:38 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 18332 + 12 Power_Cycle_Count -O--C- 100 100 000 - 22 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 069 069 010 - 69 +173 Unknown_Attribute -O--C- 100 100 000 - 2752579 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 13 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Temperature_Celsius PO--C- 100 100 000 - 95 +241 Total_LBAs_Written -O--C- 100 100 000 - 2180 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 18332 --- Power-on Hours +0x01 0x018 6 4573473554 --- Logical Sectors Written +0x01 0x028 6 34790691 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 51 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 51 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/OCZ/AGILITY4/AGILITY4 128GB/980B2080A099 b/SSD/OCZ/AGILITY4/AGILITY4 128GB/980B2080A099 new file mode 100644 index 000000000..f94079e48 --- /dev/null +++ b/SSD/OCZ/AGILITY4/AGILITY4 128GB/980B2080A099 @@ -0,0 +1,107 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Indilinx Barefoot_2/Everest/Martini based SSDs +Device Model: OCZ-AGILITY4 +Serial Number: -- +LU WWN Device Id: 5 e83a97 ... +Firmware Version: 1.5.2 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Nov 3 11:50:55 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Unavailable +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x1d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 0) minutes. +Extended self-test routine +recommended polling time: ( 0) minutes. + +SMART Attributes Data Structure revision number: 18 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 005 000 000 - 5 + 3 Spin_Up_Time ------ 100 100 000 - 0 + 4 Start_Stop_Count ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 1 + 9 Power_On_Hours ------ 100 100 000 - 4224 + 12 Power_Cycle_Count ------ 100 100 000 - 3124 +232 Lifetime_Writes ------ 100 100 000 - 11544709138 +233 Media_Wearout_Indicator ------ 099 000 000 - 99 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 0 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 SL R/O 1 NCQ Command Error log +0xa0 SL VS 255 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +Warning! SMART Self-Test Log Structure error: invalid SMART checksum. +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/OCZ/TRION150/TRION150 240GB/B6C69DD5A8A2 b/SSD/OCZ/TRION150/TRION150 240GB/B6C69DD5A8A2 new file mode 100644 index 000000000..3eb8e3dc8 --- /dev/null +++ b/SSD/OCZ/TRION150/TRION150 240GB/B6C69DD5A8A2 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: OCZ/Toshiba Trion SSDs +Device Model: OCZ-TRION150 +Serial Number: -- +LU WWN Device Id: 5 e83a97 ... +Firmware Version: SAFZ12.2 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 23 09:49:41 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 980 + 12 Power_Cycle_Count -O--C- 100 100 000 - 335 +167 SSD_Protect_Mode -O---K 100 100 000 - 0 +168 SATA_PHY_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Count PO---- 100 100 010 - 0 +173 Erase_Count -O--C- 192 192 000 - 0 +192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 66 +194 Temperature_Celsius PO---K 068 051 020 - 32 (Min/Max 18/49) +241 Host_Writes -O--CK 100 100 000 - 26480 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 335 --- Lifetime Power-On Resets +0x01 0x010 4 980 --- Power-on Hours +0x01 0x018 6 1735397239 --- Logical Sectors Written +0x01 0x020 6 14554366 --- Number of Write Commands +0x01 0x028 6 794467112 --- Logical Sectors Read +0x01 0x030 6 15832605 --- Number of Read Commands +0x01 0x038 6 3530622784 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 806 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 8 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 35117 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 13 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/OCZ/VERTEX-TURBO/VERTEX-TURBO 32GB/2E4FB510C7A9 b/SSD/OCZ/VERTEX-TURBO/VERTEX-TURBO 32GB/2E4FB510C7A9 new file mode 100644 index 000000000..a00ae583c --- /dev/null +++ b/SSD/OCZ/VERTEX-TURBO/VERTEX-TURBO 32GB/2E4FB510C7A9 @@ -0,0 +1,125 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Indilinx Barefoot based SSDs +Device Model: OCZ VERTEX-TURBO +Serial Number: -- +Firmware Version: 1.7 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +Local Time is: Wed Aug 19 20:11:47 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x1d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 0) minutes. +Extended self-test routine +recommended polling time: ( 0) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ --- --- --- - 7 + 9 Power_On_Hours ------ --- --- --- - 8415 + 12 Power_Cycle_Count ------ --- --- --- - 38 +184 Initial_Bad_Block_Count ------ --- --- --- - 10 +195 Program_Failure_Blk_Ct ------ --- --- --- - 0 +196 Erase_Failure_Blk_Ct ------ --- --- --- - 0 +197 Read_Failure_Blk_Ct ------ --- --- --- - 108 +198 Read_Sectors_Tot_Ct ------ --- --- --- - 873294891 +199 Write_Sectors_Tot_Ct ------ --- --- --- - 3307807450 +200 Read_Commands_Tot_Ct ------ --- --- --- - 22790071 +201 Write_Commands_Tot_Ct ------ --- --- --- - 117561741 +202 Error_Bits_Flash_Tot_Ct ------ --- --- --- - 444761 +203 Corr_Read_Errors_Tot_Ct ------ --- --- --- - 422052 +204 Bad_Block_Full_Flag ------ --- --- --- - 0 +205 Max_PE_Count_Spec ------ --- --- --- - 5000 +206 Min_Erase_Count ------ --- --- --- - 269 +207 Max_Erase_Count ------ --- --- --- - 872 +208 Average_Erase_Count ------ --- --- --- - 614 +209 Remaining_Lifetime_Perc ------ --- --- --- - 88 +211 SATA_Error_Ct_CRC ------ --- --- --- - 0 +212 SATA_Error_Ct_Handshake ------ --- --- --- - 0 +213 Indilinx_Internal ------ --- --- --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 51 Comprehensive SMART error log +0x03 GPL,SL R/O 77 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0xa0 GPL VS 4096 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 49 (77 sectors) +No Errors Logged + +Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +[Reserved: 0x00 0x00 0x41 0x00] +ID Size Value Description +0x0310 2 16534 Unknown +0x0003 0: Invalid entry + + + diff --git a/SSD/OCZ/VERTEX-TURBO/VERTEX-TURBO 32GB/DE3DECA80714 b/SSD/OCZ/VERTEX-TURBO/VERTEX-TURBO 32GB/DE3DECA80714 new file mode 100644 index 000000000..5335a6315 --- /dev/null +++ b/SSD/OCZ/VERTEX-TURBO/VERTEX-TURBO 32GB/DE3DECA80714 @@ -0,0 +1,125 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Indilinx Barefoot based SSDs +Device Model: OCZ VERTEX-TURBO +Serial Number: -- +Firmware Version: 1.7 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +Local Time is: Wed Aug 19 20:11:47 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x1d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 0) minutes. +Extended self-test routine +recommended polling time: ( 0) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ --- --- --- - 7 + 9 Power_On_Hours ------ --- --- --- - 5919 + 12 Power_Cycle_Count ------ --- --- --- - 10 +184 Initial_Bad_Block_Count ------ --- --- --- - 27 +195 Program_Failure_Blk_Ct ------ --- --- --- - 3 +196 Erase_Failure_Blk_Ct ------ --- --- --- - 0 +197 Read_Failure_Blk_Ct ------ --- --- --- - 0 +198 Read_Sectors_Tot_Ct ------ --- --- --- - 529749265 +199 Write_Sectors_Tot_Ct ------ --- --- --- - 7480569679 +200 Read_Commands_Tot_Ct ------ --- --- --- - 17380278 +201 Write_Commands_Tot_Ct ------ --- --- --- - 214610988 +202 Error_Bits_Flash_Tot_Ct ------ --- --- --- - 84584 +203 Corr_Read_Errors_Tot_Ct ------ --- --- --- - 82841 +204 Bad_Block_Full_Flag ------ --- --- --- - 0 +205 Max_PE_Count_Spec ------ --- --- --- - 5000 +206 Min_Erase_Count ------ --- --- --- - 361 +207 Max_Erase_Count ------ --- --- --- - 933 +208 Average_Erase_Count ------ --- --- --- - 671 +209 Remaining_Lifetime_Perc ------ --- --- --- - 87 +211 SATA_Error_Ct_CRC ------ --- --- --- - 0 +212 SATA_Error_Ct_Handshake ------ --- --- --- - 0 +213 Indilinx_Internal ------ --- --- --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 51 Comprehensive SMART error log +0x03 GPL,SL R/O 77 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0xa0 GPL VS 4096 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 49 (77 sectors) +No Errors Logged + +Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +[Reserved: 0x00 0x00 0x41 0x00] +ID Size Value Description +0x0c98 2 16534 Unknown +0x0003 0: Invalid entry + + + diff --git a/SSD/OCZ/VERTEX2/VERTEX2 120GB/D8F62CE1E9BF b/SSD/OCZ/VERTEX2/VERTEX2 120GB/D8F62CE1E9BF new file mode 100644 index 000000000..2a997a497 --- /dev/null +++ b/SSD/OCZ/VERTEX2/VERTEX2 120GB/D8F62CE1E9BF @@ -0,0 +1,154 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE-20200612 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: OCZ-VERTEX2 +Serial Number: -- +LU WWN Device Id: 5 e83a97 ... +Firmware Version: 1.23 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Jul 17 19:47:42 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown (0x100) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 104 104 050 - 0/8446093 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 20058h+27m+28.710s + 12 Power_Cycle_Count -O--CK 099 099 000 - 1852 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 27 +177 Wear_Range_Delta ------ 000 000 000 - 0 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 001 129 000 - 1 (0 127 0 129 0) +195 ECC_Uncorr_Error_Count --SRC- 104 104 000 - 0/8446093 +196 Reallocated_Event_Count PO--CK 100 100 000 - 0 +231 SSD_Life_Left PO--C- 100 100 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 1408 +234 SandForce_Internal -O--CK 000 000 000 - 1152 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 1152 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 8448 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 127/-127 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 478 (479) +Invalid Temperature History Size or Index + +SCT Error Recovery Control: + Read: 256 (25.6 seconds) + Write: 256 (25.6 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/OCZ/VERTEX3/VERTEX3 120GB/4906AC7AC2F6 b/SSD/OCZ/VERTEX3/VERTEX3 120GB/4906AC7AC2F6 new file mode 100644 index 000000000..e2115a52a --- /dev/null +++ b/SSD/OCZ/VERTEX3/VERTEX3 120GB/4906AC7AC2F6 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: OCZ-VERTEX3 +Serial Number: -- +LU WWN Device Id: 5 e83a97 ... +Firmware Version: 2.15 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jul 16 11:00:34 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 2097) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 092 092 050 - 0/40349599 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 055 055 000 - 39781h+43m+36.030s + 12 Power_Cycle_Count -O--CK 097 097 000 - 3211 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 286 +177 Wear_Range_Delta ------ 000 000 000 - 3 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 30/30) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/40349599 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/40349599 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/40349599 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 100 100 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 8773 +234 SandForce_Internal -O--CK 000 000 000 - 6320 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 6320 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 15657 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 10% 24508 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 478 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/OCZ/VERTEX3/VERTEX3 64GB/245E71AD4EED b/SSD/OCZ/VERTEX3/VERTEX3 64GB/245E71AD4EED new file mode 100644 index 000000000..905ca232c --- /dev/null +++ b/SSD/OCZ/VERTEX3/VERTEX3 64GB/245E71AD4EED @@ -0,0 +1,99 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: OCZ-VERTEX3 +Serial Number: -- +LU WWN Device Id: 5 e83a97 ... +Firmware Version: 2.25 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 23:09:25 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0/0 + 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 + 9 Power_On_Hours_and_Msec 0x0032 048 048 000 Old_age Always - 45941h+56m+55.460s + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1426 +171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0 +174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 144 +177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 7 +181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0 +182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0022 030 030 000 Old_age Always - 30 (Min/Max 30/30) +195 ECC_Uncorr_Error_Count 0x001c 100 100 000 Old_age Offline - 0/0 +196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 +201 Unc_Soft_Read_Err_Rate 0x001c 100 100 000 Old_age Offline - 0/0 +204 Soft_ECC_Correct_Rate 0x001c 100 100 000 Old_age Offline - 0/0 +230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 +231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0 +233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 15622 +234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 8930 +241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 8930 +242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 8098 + +SMART Error Log not supported + +SMART Self-test Log not supported + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/OCZ/VERTEX3/VERTEX3 64GB/7AB979508C45 b/SSD/OCZ/VERTEX3/VERTEX3 64GB/7AB979508C45 new file mode 100644 index 000000000..86739b20e --- /dev/null +++ b/SSD/OCZ/VERTEX3/VERTEX3 64GB/7AB979508C45 @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: OCZ-VERTEX3 +Serial Number: -- +LU WWN Device Id: 5 e83a97 ... +Firmware Version: 2.25 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 13:51:23 2020 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0021) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 119 119 050 - 0/226130649 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 046 046 000 - 47595h+17m+39.160s + 12 Power_Cycle_Count -O--CK 100 100 000 - 66 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 829 +177 Wear_Range_Delta ------ 000 000 000 - 7 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 30/30) +195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/226130649 +196 Reallocated_Event_Count PO--CK 100 100 003 - 0 +201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/226130649 +204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/226130649 +230 Life_Curve_Status PO--C- 100 100 000 - 100 +231 SSD_Life_Left PO--C- 091 091 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 24087 +234 SandForce_Internal -O--CK 000 000 000 - 19386 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 19386 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 33172 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 30/30 Celsius +Lifetime Min/Max Temperature: 30/30 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 478 (1) + +SCT Error Recovery Control command not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 183 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 149 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + + + diff --git a/SSD/OCZ/VERTEX4/VERTEX4 128GB/E31AB8CAE6AC b/SSD/OCZ/VERTEX4/VERTEX4 128GB/E31AB8CAE6AC new file mode 100644 index 000000000..9777fe81f --- /dev/null +++ b/SSD/OCZ/VERTEX4/VERTEX4 128GB/E31AB8CAE6AC @@ -0,0 +1,107 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.0-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Indilinx Barefoot_2/Everest/Martini based SSDs +Device Model: OCZ-VERTEX4 +Serial Number: -- +LU WWN Device Id: 5 e83a97 ... +Firmware Version: 1.5 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Nov 22 18:48:28 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Unavailable +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x1d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 0) minutes. +Extended self-test routine +recommended polling time: ( 0) minutes. + +SMART Attributes Data Structure revision number: 18 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 005 000 000 - 5 + 3 Spin_Up_Time ------ 100 100 000 - 0 + 4 Start_Stop_Count ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 3 + 9 Power_On_Hours ------ 100 100 000 - 28512 + 12 Power_Cycle_Count ------ 100 100 000 - 2331 +232 Lifetime_Writes ------ 100 100 000 - 36748618594 +233 Media_Wearout_Indicator ------ 093 000 000 - 93 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 0 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 SL R/O 1 NCQ Command Error log +0xa0 SL VS 255 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +Warning! SMART Self-Test Log Structure error: invalid SMART checksum. +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/OCZ/VERTEX4/VERTEX4 64GB/F1FDDFE2CFC7 b/SSD/OCZ/VERTEX4/VERTEX4 64GB/F1FDDFE2CFC7 new file mode 100644 index 000000000..c870b08c8 --- /dev/null +++ b/SSD/OCZ/VERTEX4/VERTEX4 64GB/F1FDDFE2CFC7 @@ -0,0 +1,107 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Indilinx Barefoot_2/Everest/Martini based SSDs +Device Model: OCZ-VERTEX4 +Serial Number: -- +LU WWN Device Id: 5 e83a97 ... +Firmware Version: 1.4.1.3 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Sep 23 21:11:18 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Unavailable +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x1d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging NOT supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 0) minutes. +Extended self-test routine +recommended polling time: ( 0) minutes. + +SMART Attributes Data Structure revision number: 18 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 006 000 000 - 6 + 3 Spin_Up_Time ------ 100 100 000 - 0 + 4 Start_Stop_Count ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 4966 + 12 Power_Cycle_Count ------ 100 100 000 - 1114 +232 Lifetime_Writes ------ 100 100 000 - 6819500139 +233 Media_Wearout_Indicator ------ 100 000 000 - 100 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 0 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x06 SL R/O 1 SMART self-test log +0x07 SL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 SL R/O 1 NCQ Command Error log +0xa0 SL VS 255 Device vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log (GP Log 0x07) not supported + +Warning! SMART Self-Test Log Structure error: invalid SMART checksum. +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/ORICO/PH100/PH100-128G/9E8761F07F32 b/SSD/ORICO/PH100/PH100-128G/9E8761F07F32 new file mode 100644 index 000000000..e65f92041 --- /dev/null +++ b/SSD/ORICO/PH100/PH100-128G/9E8761F07F32 @@ -0,0 +1,148 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ORICO PH100-128G +Serial Number: -- +Firmware Version: T0311A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:18:29 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 475 + 12 Power_Cycle_Count -O--CK 100 100 050 - 16 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 23 +164 Unknown_Attribute -O--CK 100 100 050 - 13408 +165 Unknown_Attribute -O--CK 100 100 050 - 64 +166 Unknown_Attribute -O--CK 100 100 050 - 3 +167 Unknown_Attribute -O--CK 100 100 050 - 13 +168 Unknown_Attribute -O--CK 100 100 050 - 5050 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 9 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 11538 +242 Total_LBAs_Read ----CK 100 100 050 - 1768 +245 Unknown_Attribute -O--CK 100 100 050 - 9994 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 475 --- Power-on Hours +0x01 0x018 6 756181030 --- Logical Sectors Written +0x01 0x020 6 3632934 --- Number of Write Commands +0x01 0x028 6 115882012 --- Logical Sectors Read +0x01 0x030 6 1191566 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/OWC/Aura/Aura/77E8894FE42F b/SSD/OWC/Aura/Aura/77E8894FE42F new file mode 100644 index 000000000..c9e298e10 --- /dev/null +++ b/SSD/OWC/Aura/Aura/77E8894FE42F @@ -0,0 +1,160 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: OWC Aura +Serial Number: -- +LU WWN Device Id: 5 888914 ... +Firmware Version: N1007C +User Capacity: 960,197,124,096 bytes [960 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 15 11:42:18 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 80 + 12 Power_Cycle_Count ------ 100 100 000 - 2108 +160 Unknown_Attribute ------ 100 100 000 - 0 +161 Unknown_Attribute ------ 100 100 000 - 211 +163 Unknown_Attribute ------ 100 100 000 - 63 +164 Unknown_Attribute ------ 100 100 000 - 26469 +165 Unknown_Attribute ------ 100 100 000 - 98 +166 Unknown_Attribute ------ 100 100 000 - 0 +167 Unknown_Attribute ------ 100 100 000 - 13 +168 Unknown_Attribute ------ 100 100 000 - 3000 +169 Unknown_Attribute ------ 100 100 000 - 100 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 2056 +194 Temperature_Celsius ------ 100 100 000 - 36 +195 Hardware_ECC_Recovered ------ 100 100 000 - 6394 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 1 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Total_LBAs_Written ------ 100 100 000 - 149380 +242 Total_LBAs_Read ------ 100 100 000 - 101087 +245 Unknown_Attribute ------ 100 100 000 - 423504 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2108 --- Lifetime Power-On Resets +0x01 0x010 4 80 --- Power-on Hours +0x01 0x018 6 1199883344 --- Logical Sectors Written +0x01 0x020 6 178560863 --- Number of Write Commands +0x01 0x028 6 2329900553 --- Logical Sectors Read +0x01 0x030 6 95733957 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2062 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 476 --- Number of Hardware Resets +0x06 0x018 4 1 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/OWC/Mercury/Mercury Extreme Pro SSD/A4F067AC577B b/SSD/OWC/Mercury/Mercury Extreme Pro SSD/A4F067AC577B new file mode 100644 index 000000000..1258b507f --- /dev/null +++ b/SSD/OWC/Mercury/Mercury Extreme Pro SSD/A4F067AC577B @@ -0,0 +1,152 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: OWC Mercury Extreme Pro SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: 343A13F0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Mon Nov 2 23:27:23 2020 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unknown (0x100) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7f) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 100 100 050 - 0/3222070 + 5 Retired_Block_Count PO--CK 100 100 003 - 0 + 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 15769h+04m+05.480s + 12 Power_Cycle_Count -O--CK 098 098 000 - 2854 +171 Program_Fail_Count -O--CK 000 000 000 - 0 +172 Erase_Fail_Count -O--CK 000 000 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 72 +177 Wear_Range_Delta ------ 000 000 000 - 1 +181 Program_Fail_Count -O--CK 000 000 000 - 0 +182 Erase_Fail_Count -O--CK 000 000 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 001 129 000 - 1 (0 127 0 129 0) +195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 0/3222070 +196 Reallocated_Event_Count PO--CK 100 100 000 - 0 +231 SSD_Life_Left PO--C- 100 100 010 - 0 +233 SandForce_Internal ------ 000 000 000 - 13440 +234 SandForce_Internal -O--CK 000 000 000 - 10240 +241 Lifetime_Writes_GiB -O--CK 000 000 000 - 10240 +242 Lifetime_Reads_GiB -O--CK 000 000 000 - 14272 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 127/-127 Celsius +Lifetime Min/Max Temperature: 127/-127 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 478 (479) +Invalid Temperature History Size or Index + +SCT Error Recovery Control: + Read: 256 (25.6 seconds) + Write: 256 (25.6 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/PNY/CS900/CS900 120GB SSD/08F51548E874 b/SSD/PNY/CS900/CS900 120GB SSD/08F51548E874 new file mode 100644 index 000000000..a870bf220 --- /dev/null +++ b/SSD/PNY/CS900/CS900 120GB SSD/08F51548E874 @@ -0,0 +1,89 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: PNY CS900 120GB SSD +Serial Number: -- +LU WWN Device Id: 5 f8db4c ... +Firmware Version: CS900613 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 21:45:38 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 945 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 208 +168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0 +170 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 153 +173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 524346 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 50 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 204 +231 Temperature_Celsius 0x0013 100 100 000 Pre-fail Always - 99 +241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 734 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/PNY/CS900/CS900 120GB SSD/2A05F3C8B743 b/SSD/PNY/CS900/CS900 120GB SSD/2A05F3C8B743 new file mode 100644 index 000000000..a84837655 --- /dev/null +++ b/SSD/PNY/CS900/CS900 120GB SSD/2A05F3C8B743 @@ -0,0 +1,157 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: PNY CS900 120GB SSD +Serial Number: -- +LU WWN Device Id: 5 f8db4c ... +Firmware Version: CS900612 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:04 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7548 + 12 Power_Cycle_Count -O--C- 100 100 000 - 55 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 092 092 000 - 0/71 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 125 (Average 99) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 53 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 96 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 7740 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 55 --- Lifetime Power-On Resets +0x01 0x010 4 7548 --- Power-on Hours +0x01 0x018 6 16233463169 --- Logical Sectors Written +0x01 0x028 6 22872713235 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/PNY/CS900/CS900 120GB SSD/471DA99EF7E8 b/SSD/PNY/CS900/CS900 120GB SSD/471DA99EF7E8 new file mode 100644 index 000000000..b5fee989f --- /dev/null +++ b/SSD/PNY/CS900/CS900 120GB SSD/471DA99EF7E8 @@ -0,0 +1,156 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: PNY CS900 120GB SSD +Serial Number: -- +LU WWN Device Id: 5 f8db4c ... +Firmware Version: CS900613 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 13:53:22 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 2168 + 12 Power_Cycle_Count -O--C- 100 100 000 - 303 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 000 - 0/169 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 16 (Average 11) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 146 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 99 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 1073 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 303 --- Lifetime Power-On Resets +0x01 0x010 4 2168 --- Power-on Hours +0x01 0x018 6 2250445032 --- Logical Sectors Written +0x01 0x028 6 561091014 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1019 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 20 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/PNY/CS900/CS900 120GB SSD/C3B0D4C00723 b/SSD/PNY/CS900/CS900 120GB SSD/C3B0D4C00723 new file mode 100644 index 000000000..8a30ad618 --- /dev/null +++ b/SSD/PNY/CS900/CS900 120GB SSD/C3B0D4C00723 @@ -0,0 +1,157 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven SSDs +Device Model: PNY CS900 120GB SSD +Serial Number: -- +LU WWN Device Id: 5 f8db4c ... +Firmware Version: CS900612 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 17:38:04 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 7570 + 12 Power_Cycle_Count -O--C- 100 100 000 - 57 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 051 051 000 - 0/619 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 132 (Average 106) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 54 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +231 SSD_Life_Left PO--C- 100 100 000 - 96 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 7761 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 57 --- Lifetime Power-On Resets +0x01 0x010 4 7570 --- Power-on Hours +0x01 0x018 6 16277245471 --- Logical Sectors Written +0x01 0x028 6 14505575676 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 24 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/PNY/SSD2/SSD2SC240G5LC709B121-511/A3C586107375 b/SSD/PNY/SSD2/SSD2SC240G5LC709B121-511/A3C586107375 new file mode 100644 index 000000000..3f665d85d --- /dev/null +++ b/SSD/PNY/SSD2/SSD2SC240G5LC709B121-511/A3C586107375 @@ -0,0 +1,199 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SSD2SC240G5LC709B121-511 +Serial Number: -- +LU WWN Device Id: 5 f8db4c ... +Firmware Version: 560ABBF0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 5 12:48:37 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x7d) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 48) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0025) SCT Status supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 10 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0 + 5 Reallocated_Sector_Ct PO--CK 098 098 003 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 312 (22 86 0) + 12 Power_Cycle_Count -O--CK 100 100 000 - 508 +171 Unknown_Attribute -O-R-- 100 100 000 - 0 +172 Unknown_Attribute -O--CK 100 100 000 - 0 +174 Unknown_Attribute ----CK 000 000 000 - 29 +177 Wear_Leveling_Count ------ 000 000 000 - 99 +181 Program_Fail_Cnt_Total -O-R-- 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +187 Reported_Uncorrect -O--C- 100 100 000 - 0 +194 Temperature_Celsius -O---K 044 062 000 - 44 (Min/Max 11/62) +195 Hardware_ECC_Recovered --SRC- 120 120 000 - 0 +196 Reallocated_Event_Count PO--CK 098 098 003 - 0 +201 Unknown_SSD_Attribute --SRC- 120 120 000 - 0 +204 Soft_ECC_Correction --SRC- 120 120 000 - 0 +230 Unknown_SSD_Attribute PO--C- 100 100 000 - 100 +231 Temperature_Celsius PO--C- 100 100 010 - 12884901888 +233 Media_Wearout_Indicator -O--CK 000 000 000 - 6182 +234 Unknown_Attribute -O--CK 000 000 000 - 1827 +241 Total_LBAs_Written -O--CK 000 000 000 - 1827 +242 Total_LBAs_Read -O--CK 000 000 000 - 1727 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x04 GPL,SL R/O 16 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xb7 GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log not supported + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 312 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 0 (0x0000) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: 11/62 Celsius +Lifetime Min/Max Temperature: 11/62 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/65 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 478 (120) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 508 --- Lifetime Power-On Resets +0x01 0x010 4 312 --- Power-on Hours +0x01 0x018 6 3831699528 --- Logical Sectors Written +0x01 0x028 6 3622026878 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 44 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 65 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 391 --- Number of Hardware Resets +0x06 0x010 4 2 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 33 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +0x0002 2 0 R_ERR response for data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS + diff --git a/SSD/Phison/SATA SSD/SATA SSD 120GB/83F78741AEFA b/SSD/Phison/SATA SSD/SATA SSD 120GB/83F78741AEFA new file mode 100644 index 000000000..4fdce6a96 --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 120GB/83F78741AEFA @@ -0,0 +1,175 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SAFM12.2 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Sep 28 14:32:34 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 6560 + 12 Power_Cycle_Count -O--C- 100 100 000 - 4490 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 +170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 010 - 0/104 +173 MaxAvgErase_Ct -O--C- 100 100 000 - 57 (Average 29) +192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 481 +194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 30/30) +196 Not_In_Use -O---- 100 100 010 - 0 +218 CRC_Error_Count PO-R-- 100 100 050 - 0 +241 Lifetime_Writes_GiB -O--C- 100 100 000 - 5251 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 6 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6345 - +# 2 Short offline Completed without error 00% 6343 - +# 3 Short offline Completed without error 00% 6277 - +# 4 Short offline Completed without error 00% 6275 - +# 5 Short offline Completed without error 00% 6275 - +# 6 Short offline Completed without error 00% 3913 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 4490 --- Lifetime Power-On Resets +0x01 0x010 4 6560 --- Power-on Hours +0x01 0x018 6 11012644757 --- Logical Sectors Written +0x01 0x020 6 174879603 --- Number of Write Commands +0x01 0x028 6 11695590963 --- Logical Sectors Read +0x01 0x030 6 176238460 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 32 --- Average Short Term Temperature +0x05 0x018 1 32 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 5 --- Lowest Temperature +0x05 0x030 1 50 --- Highest Average Short Term Temperature +0x05 0x038 1 16 --- Lowest Average Short Term Temperature +0x05 0x040 1 50 --- Highest Average Long Term Temperature +0x05 0x048 1 16 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 50 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4324772 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Phison/SATA SSD/SATA SSD 128GB/F59C196879E7 b/SSD/Phison/SATA SSD/SATA SSD 128GB/F59C196879E7 new file mode 100644 index 000000000..1c0038f30 --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 128GB/F59C196879E7 @@ -0,0 +1,87 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: S9FM02.8 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Jul 3 05:07:29 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 7605 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 75 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0013 100 100 010 Pre-fail Always - 0/26 +173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 28 (Average 452) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 1 +194 Temperature_Celsius 0x0023 070 070 000 Pre-fail Always - 30 +196 Not_In_Use 0x0000 100 100 000 Old_age Offline - 0 +218 CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 2375564 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Phison/SATA SSD/SATA SSD 16GB/0C45208B982B b/SSD/Phison/SATA SSD/SATA SSD 16GB/0C45208B982B new file mode 100644 index 000000000..1d377f024 --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 16GB/0C45208B982B @@ -0,0 +1,89 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: S9FM02.8 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 02:07:42 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 29488 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 123 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0013 100 100 010 Pre-fail Always - 0/11 +173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 904 (Average 5564) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 10 +194 Temperature_Celsius 0x0023 070 070 000 Pre-fail Always - 30 +196 Not_In_Use 0x0000 100 100 000 Old_age Offline - 0 +218 CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 3832747 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Phison/SATA SSD/SATA SSD 16GB/11EB82F90D47 b/SSD/Phison/SATA SSD/SATA SSD 16GB/11EB82F90D47 new file mode 100644 index 000000000..3fe89fd0d --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 16GB/11EB82F90D47 @@ -0,0 +1,87 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 16:05:07 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1393 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 10 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 100 100 010 Pre-fail Always - 0/24 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 9 (Average 6) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 8 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 99 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 34 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Phison/SATA SSD/SATA SSD 16GB/21F4E5F525C7 b/SSD/Phison/SATA SSD/SATA SSD 16GB/21F4E5F525C7 new file mode 100644 index 000000000..0042f4b46 --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 16GB/21F4E5F525C7 @@ -0,0 +1,89 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: S9FM01.8 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 17:45:22 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 8612 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 67 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0013 100 100 010 Pre-fail Always - 0/13 +173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 178 (Average 607) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 1 +194 Temperature_Celsius 0x0023 070 070 030 Pre-fail Always - 30 +196 Not_In_Use 0x0000 100 100 000 Old_age Offline - 0 +218 CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 1815092 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Phison/SATA SSD/SATA SSD 16GB/35B762CF93F6 b/SSD/Phison/SATA SSD/SATA SSD 16GB/35B762CF93F6 new file mode 100644 index 000000000..a7900c858 --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 16GB/35B762CF93F6 @@ -0,0 +1,88 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: SBFM01.0 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 15:43:36 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 32) minutes. +Conveyance self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 23561 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 130 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 096 096 010 Pre-fail Always - 0/8 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 129 (Average 95) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 83 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 96 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 466 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Phison/SATA SSD/SATA SSD 16GB/393980199625 b/SSD/Phison/SATA SSD/SATA SSD 16GB/393980199625 new file mode 100644 index 000000000..09f1c093f --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 16GB/393980199625 @@ -0,0 +1,87 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 16:04:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1395 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 16 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 100 100 010 Pre-fail Always - 0/23 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 9 (Average 6) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 13 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 99 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 34 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Phison/SATA SSD/SATA SSD 16GB/4053A8FB084B b/SSD/Phison/SATA SSD/SATA SSD 16GB/4053A8FB084B new file mode 100644 index 000000000..b0bbb7c72 --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 16GB/4053A8FB084B @@ -0,0 +1,87 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: S9FM02.2 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 20:32:53 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 14074 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 124 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0013 100 100 010 Pre-fail Always - 0/16 +173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 401 (Average 17434) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 4 +194 Temperature_Celsius 0x0023 070 070 000 Pre-fail Always - 30 +196 Not_In_Use 0x0000 100 100 000 Old_age Offline - 0 +218 CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 1394988 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Phison/SATA SSD/SATA SSD 16GB/96E485339028 b/SSD/Phison/SATA SSD/SATA SSD 16GB/96E485339028 new file mode 100644 index 000000000..e762fbc1f --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 16GB/96E485339028 @@ -0,0 +1,88 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.1 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 16:53:45 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 14938 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 72 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 086 086 010 Pre-fail Always - 0/19 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 164 (Average 123) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 69 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 95 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 1282 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Phison/SATA SSD/SATA SSD 16GB/E5E3E2A37C2F b/SSD/Phison/SATA SSD/SATA SSD 16GB/E5E3E2A37C2F new file mode 100644 index 000000000..db5c4b073 --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 16GB/E5E3E2A37C2F @@ -0,0 +1,88 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 10:07:58 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 19301 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 14 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 093 093 010 Pre-fail Always - 0/15 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 222 (Average 175) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 12 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 94 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 1503 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Phison/SATA SSD/SATA SSD 16GB/FB1A96831166 b/SSD/Phison/SATA SSD/SATA SSD 16GB/FB1A96831166 new file mode 100644 index 000000000..822edb030 --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 16GB/FB1A96831166 @@ -0,0 +1,88 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.1 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 26 09:10:38 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2431 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 67 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 087 087 010 Pre-fail Always - 0/26 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 19 (Average 12) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 44 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 99 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 59 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Phison/SATA SSD/SATA SSD 32GB/D2BA40A2CA7A b/SSD/Phison/SATA SSD/SATA SSD 32GB/D2BA40A2CA7A new file mode 100644 index 000000000..ae95df9bc --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 32GB/D2BA40A2CA7A @@ -0,0 +1,87 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +Firmware Version: SBFM01.3 +User Capacity: 30,016,659,456 bytes [30.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 22 12:37:49 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3489 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 25 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 100 100 010 Pre-fail Always - 0/71 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 8 (Average 6) +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 19 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 99 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 38 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Phison/SATA SSD/SATA SSD 64GB/C745EBB43FA9 b/SSD/Phison/SATA SSD/SATA SSD 64GB/C745EBB43FA9 new file mode 100644 index 000000000..54a7b0d9a --- /dev/null +++ b/SSD/Phison/SATA SSD/SATA SSD 64GB/C745EBB43FA9 @@ -0,0 +1,88 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Phison Driven OEM SSDs +Device Model: SATA SSD +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFM01.2 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 5 09:55:12 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 804 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 22 +168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 +170 Bad_Blk_Ct_Erl/Lat 0x0003 096 096 010 Pre-fail Always - 0/70 +173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 1 +192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 18 +194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) +218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 100 +241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 22 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Plextor/PX-256/PX-256M5S/94A344E1746B b/SSD/Plextor/PX-256/PX-256M5S/94A344E1746B new file mode 100644 index 000000000..463f19117 --- /dev/null +++ b/SSD/Plextor/PX-256/PX-256M5S/94A344E1746B @@ -0,0 +1,156 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Plextor M3/M5/M6 Series SSDs +Device Model: PLEXTOR PX-256M5S +Serial Number: -- +LU WWN Device Id: 5 002303 ... +Add. Product Id: DA802070 +Firmware Version: 1.05 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 12 15:19:45 2020 +04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 10) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO---- 100 100 070 - 0 + 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0 + 9 Power_On_Hours -O---- 100 100 000 - 1846 + 12 Power_Cycle_Count -O---- 100 100 000 - 3895 +177 Wear_Leveling_Count PO---- 100 100 000 - 167186 +178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0 +181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 +182 Erase_Fail_Count_Total PO---- 100 100 000 - 0 +187 Reported_Uncorrect -O---- 100 100 000 - 0 +192 Power-Off_Retract_Count PO---- 100 100 000 - 215 +196 Reallocated_Event_Count PO---- 100 100 000 - 0 +198 Offline_Uncorrectable PO---- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO---- 100 100 000 - 14 +232 Available_Reservd_Space PO---- 100 100 010 - 0 +241 Host_Writes_32MiB PO---- 100 100 000 - 1058650 +242 Host_Reads_32MiB PO---- 100 100 000 - 1243031 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 0 +SMART Log Directory Version 0 +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 1 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 0 +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 13063 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (0) + +SCT Error Recovery Control: + Read: 2 (0.2 seconds) + Write: 2 (0.2 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Plextor/PX-256/PX-256M5S/AE096C1A946D b/SSD/Plextor/PX-256/PX-256M5S/AE096C1A946D new file mode 100644 index 000000000..b31b723ea --- /dev/null +++ b/SSD/Plextor/PX-256/PX-256M5S/AE096C1A946D @@ -0,0 +1,154 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Plextor M3/M5/M6 Series SSDs +Device Model: PLEXTOR PX-256M5S +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Add. Product Id: DA802070 +Firmware Version: 1.05 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 12 15:19:45 2020 +04 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 10) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x00) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO---- 100 100 070 - 0 + 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0 + 9 Power_On_Hours -O---- 100 100 000 - 1242 + 12 Power_Cycle_Count -O---- 100 100 000 - 4137 +177 Wear_Leveling_Count PO---- 100 100 000 - 90321 +178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0 +181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 +182 Erase_Fail_Count_Total PO---- 100 100 000 - 0 +187 Reported_Uncorrect -O---- 100 100 000 - 0 +192 Power-Off_Retract_Count PO---- 100 100 000 - 727 +196 Reallocated_Event_Count PO---- 100 100 000 - 0 +198 Offline_Uncorrectable PO---- 100 100 000 - 0 +199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0 +232 Available_Reservd_Space PO---- 100 100 010 - 0 +241 Host_Writes_32MiB PO---- 100 100 000 - 512287 +242 Host_Reads_32MiB PO---- 100 100 000 - 1148391 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 0 +SMART Log Directory Version 0 +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 1 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 0 +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 55556 - + +Selective Self-tests/Logging not supported + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 0 minutes +Temperature Logging Interval: 0 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (0) + +SCT Error Recovery Control: + Read: 2 (0.2 seconds) + Write: 2 (0.2 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/QUMO/SSD/SSD 120GB/5D9955D3E147 b/SSD/QUMO/SSD/SSD 120GB/5D9955D3E147 new file mode 100644 index 000000000..924af9771 --- /dev/null +++ b/SSD/QUMO/SSD/SSD 120GB/5D9955D3E147 @@ -0,0 +1,96 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: QUMO SSD +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: V0208 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 18:28:35 2020 +06 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 7 + 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 5 +160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +161 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 240 +163 Unknown_Attribute 0x0003 100 100 050 Pre-fail Always - 86 +164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 7424 +165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 2 +166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 +172 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 1 +173 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 5 +194 Temperature_Celsius 0x0023 070 070 000 Pre-fail Always - 30 +196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 0 +198 Offline_Uncorrectable 0x0012 100 100 000 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 +241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 2042 +242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 211 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/SK hynix/HFS128/HFS128G32MND-2200A/D97E579A738F b/SSD/SK hynix/HFS128/HFS128G32MND-2200A/D97E579A738F new file mode 100644 index 000000000..88939f095 --- /dev/null +++ b/SSD/SK hynix/HFS128/HFS128G32MND-2200A/D97E579A738F @@ -0,0 +1,289 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SK hynix SATA SSDs +Device Model: HFS128G32MND-2200A +Serial Number: -- +Firmware Version: 20200L00 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 07:59:52 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x19) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0 + 5 Retired_Block_Count -O--CK 253 253 036 - 0 + 9 Power_On_Hours -O--CK 079 079 000 - 19156 + 12 Power_Cycle_Count -O--CK 100 100 020 - 2182 +100 Total_Erase_Count -O--CK 100 100 000 - 919521 +170 Unknown_Attribute -O--CK 100 100 000 - 47 +171 Program_Fail_Count -O--CK 253 253 000 - 0 +172 Erase_Fail_Count -O--CK 253 253 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 58 +175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0 +176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0 +177 Wear_Leveling_Count -O--CK 100 100 000 - 27 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 13 +180 Erase_Fail_Count -O--CK 100 100 000 - 1953 +183 SATA_Downshift_Count -O--CK 253 253 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 2 +188 Command_Timeout -O--CK 253 253 000 - 0 +191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0 +194 Temperature_Celsius -O---- 033 000 000 - 33 (Min/Max 19/50) +195 Hardware_ECC_Recovered -O--CK 001 001 000 - 4230827456 +199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0 +201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0 +204 Soft_ECC_Correction -OSR-- 100 100 --- - 0 +212 Phy_Error_Count -O--CK 100 100 --- - 4889 +231 SSD_Life_Left PO--CK 253 253 --- - 0 +234 Unknown_SK_hynix_Attrib -O--CK 100 100 --- - 3431 +241 Total_Writes_GiB -O--CK 100 100 --- - 2915 +242 Total_Reads_GiB -O--CK 100 100 --- - 4034 +250 Read_Retry_Count -O--CK 100 100 --- - 3 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 4 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 8954 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 8954 [13] occurred at disk power-on lifetime: 18988 hours (791 days + 4 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 50 00 01 00 00 00 00 00 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:37.470 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:37.470 NOP [Abort queued commands] + 25 00 00 00 01 00 00 06 00 60 f8 e0 e0 00:00:30.670 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 d8 e0 e0 00:00:30.670 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 b8 e0 e0 00:00:30.670 READ DMA EXT + +Error 8953 [12] occurred at disk power-on lifetime: 18988 hours (791 days + 4 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 06 00 60 f8 e0 e0 00:00:30.670 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 d8 e0 e0 00:00:30.670 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 b8 e0 e0 00:00:30.670 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 98 e0 e0 00:00:30.670 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 78 e0 e0 00:00:30.670 READ DMA EXT + +Error 8952 [11] occurred at disk power-on lifetime: 18988 hours (791 days + 4 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 06 00 60 f8 e0 e0 00:00:30.670 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 d8 e0 e0 00:00:30.670 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 b8 e0 e0 00:00:30.670 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 98 e0 e0 00:00:30.670 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 78 e0 e0 00:00:30.670 READ DMA EXT + +Error 8951 [10] occurred at disk power-on lifetime: 18929 hours (788 days + 17 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 50 00 01 00 00 00 00 00 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 00 4d+01:54:45.970 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 00 4d+01:54:45.970 NOP [Abort queued commands] + 25 00 00 00 01 00 00 06 00 60 f8 e0 e0 4d+01:54:39.150 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 d8 e0 e0 4d+01:54:39.150 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 b8 e0 e0 4d+01:54:39.140 READ DMA EXT + +Error 8950 [9] occurred at disk power-on lifetime: 18929 hours (788 days + 17 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 06 00 60 f8 e0 e0 4d+01:54:39.150 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 d8 e0 e0 4d+01:54:39.150 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 b8 e0 e0 4d+01:54:39.140 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 98 e0 e0 4d+01:54:39.140 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 78 e0 e0 4d+01:54:39.140 READ DMA EXT + +Error 8949 [8] occurred at disk power-on lifetime: 18929 hours (788 days + 17 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 01 00 00 06 00 60 f8 e0 e0 4d+01:54:39.150 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 d8 e0 e0 4d+01:54:39.150 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 b8 e0 e0 4d+01:54:39.140 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 98 e0 e0 4d+01:54:39.140 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 78 e0 e0 4d+01:54:39.140 READ DMA EXT + +Error 8948 [7] occurred at disk power-on lifetime: 18929 hours (788 days + 17 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + e1 00 00 00 00 00 00 00 00 00 00 40 40 4d+01:54:04.100 IDLE IMMEDIATE + ea 00 00 00 00 00 00 00 00 00 00 40 40 4d+01:54:03.130 FLUSH CACHE EXT + 60 00 08 00 08 00 00 00 01 36 10 40 40 4d+01:54:03.030 READ FPDMA QUEUED + 60 00 08 00 00 00 00 00 06 42 d8 40 40 4d+01:54:03.030 READ FPDMA QUEUED + 60 00 08 00 f8 00 00 00 00 b8 20 40 40 4d+01:54:03.030 READ FPDMA QUEUED + +Error 8947 [6] occurred at disk power-on lifetime: 18903 hours (787 days + 15 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 50 00 01 00 00 00 00 00 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 00 2d+23:34:56.240 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 00 2d+23:34:56.240 NOP [Abort queued commands] + 25 00 00 00 01 00 00 06 00 60 f8 e0 e0 2d+23:34:49.460 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 d8 e0 e0 2d+23:34:49.460 READ DMA EXT + 25 00 00 00 20 00 00 06 00 60 b8 e0 e0 2d+23:34:49.460 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (empty) == +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (empty) == +0x07 ===== = = === == Solid State Device Statistics (empty) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SK hynix/HFS128/HFS128G39TND-N210A/69D1570B5252 b/SSD/SK hynix/HFS128/HFS128G39TND-N210A/69D1570B5252 new file mode 100644 index 000000000..2c28e070e --- /dev/null +++ b/SSD/SK hynix/HFS128/HFS128G39TND-N210A/69D1570B5252 @@ -0,0 +1,139 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SK hynix SATA SSDs +Device Model: HFS128G39TND-N210A +Serial Number: -- +Firmware Version: 30200P10 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 14:57:19 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x19) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0 + 5 Retired_Block_Count -O--CK 253 100 036 - 0 + 9 Power_On_Hours -O--CK 094 094 000 - 5583 + 12 Power_Cycle_Count -O--CK 100 100 020 - 1740 +100 Total_Erase_Count -O--CK 100 100 000 - 3165415 +168 Min_Erase_Count -O--CK 093 093 000 - 79 +169 Max_Erase_Count -O--CK 086 086 000 - 149 +171 Program_Fail_Count -O--CK 253 253 000 - 0 +172 Erase_Fail_Count -O--CK 253 253 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 43 +175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0 +176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0 +177 Wear_Leveling_Count -O--CK 091 091 000 - 96 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 69 +179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 282 +180 Erase_Fail_Count -O--CK 100 100 000 - 2358 +184 End-to-End_Error -O--CK 253 253 000 - 0 +187 Reported_Uncorrect -O--CK 253 253 000 - 0 +188 Command_Timeout -O--CK 253 253 000 - 0 +194 Temperature_Celsius -O---- 032 000 000 - 32 (Min/Max 17/51) +195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0 +196 Reallocated_Event_Count -O--CK 253 100 036 - 0 +198 Offline_Uncorrectable -O--CK 253 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0 +204 Soft_ECC_Correction -OSR-- 100 001 000 - 167 +212 Phy_Error_Count -O--CK 253 253 000 - 0 +234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 13360 +241 Total_Writes_GiB -O--CK 100 100 000 - 1358 +242 Total_Reads_GiB -O--CK 100 100 000 - 3518 +250 Read_Retry_Count -O--CK 100 100 000 - 9474754 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 4 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (empty) == +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (empty) == +0x07 ===== = = === == Solid State Device Statistics (empty) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/SK hynix/HFS256/HFS256G3AMNB-2200A/E124513FBF75 b/SSD/SK hynix/HFS256/HFS256G3AMNB-2200A/E124513FBF75 new file mode 100644 index 000000000..41378238e --- /dev/null +++ b/SSD/SK hynix/HFS256/HFS256G3AMNB-2200A/E124513FBF75 @@ -0,0 +1,186 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: HFS256G3AMNB-2200A +Serial Number: -- +Firmware Version: 10105L00 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 11:53:31 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x19) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 60) minutes. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000f 166 166 006 Pre-fail Always - 0 + 5 Reallocated_Sector_Ct 0x0032 253 253 036 Old_age Always - 0 + 9 Power_On_Hours 0x0032 059 059 000 Old_age Always - 37011 + 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 48 +100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3688015 +171 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0 +172 Unknown_Attribute 0x0032 253 100 000 Old_age Always - 0 +174 Unknown_Attribute 0x0030 100 100 000 Old_age Offline - 15 +175 Program_Fail_Count_Chip 0x0032 253 253 000 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 253 253 000 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 2654784 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 33 +179 Used_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 48 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 5264 +181 Program_Fail_Cnt_Total 0x0032 253 253 000 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 253 100 000 Old_age Always - 0 +187 Reported_Uncorrect 0x0032 253 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0002 038 000 000 Old_age Always - 38 (Min/Max 16/54) +195 Hardware_ECC_Recovered 0x0032 253 100 000 Old_age Always - 0 +201 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0 +204 Soft_ECC_Correction 0x000e 095 095 000 Old_age Always - 28592 +231 Temperature_Celsius 0x0033 253 253 010 Pre-fail Always - 0 +234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 10597 +241 Total_LBAs_Written 0x0032 100 100 --- Old_age Always - 1668 +242 Total_LBAs_Read 0x0032 100 100 --- Old_age Always - 2925 +250 Read_Error_Retry_Rate 0x0032 100 100 --- Old_age Always - 80100 + +SMART Error Log Version: 1 +ATA Error Count: 2434 (device log contains only the most recent five errors) + CR = Command Register [HEX] + FR = Features Register [HEX] + SC = Sector Count Register [HEX] + SN = Sector Number Register [HEX] + CL = Cylinder Low Register [HEX] + CH = Cylinder High Register [HEX] + DH = Device/Head Register [HEX] + DC = Device Command Register [HEX] + ER = Error register [HEX] + ST = Status register [HEX] +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 2434 occurred at disk power-on lifetime: 36972 hours (1540 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 00 00 00 00 00 00 00 at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 00 08 f0 c7 2c 40 40 18d+02:14:31.952 READ DMA EXT + 25 00 20 20 c5 2c 40 40 18d+02:14:31.952 READ DMA EXT + 25 00 20 80 4f 2c 40 40 18d+02:14:31.952 READ DMA EXT + 25 00 0c 20 6f 2d 40 40 18d+02:14:31.952 READ DMA EXT + 25 00 20 60 4f 2c 40 40 18d+02:14:31.952 READ DMA EXT + +Error 2433 occurred at disk power-on lifetime: 36972 hours (1540 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 00 00 00 00 00 00 00 at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + 25 00 08 f0 c7 2c 40 40 18d+02:14:31.952 READ DMA EXT + 25 00 20 20 c5 2c 40 40 18d+02:14:31.952 READ DMA EXT + 25 00 20 80 4f 2c 40 40 18d+02:14:31.952 READ DMA EXT + 25 00 0c 20 6f 2d 40 40 18d+02:14:31.952 READ DMA EXT + 25 00 20 60 4f 2c 40 40 18d+02:14:31.952 READ DMA EXT + +Error 2432 occurred at disk power-on lifetime: 36972 hours (1540 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 04 51 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + b1 c1 00 00 00 00 00 00 18d+02:14:26.502 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3] + f5 00 00 00 00 00 00 00 18d+02:14:26.502 SECURITY FREEZE LOCK + ec 00 00 00 00 00 00 00 18d+02:14:21.342 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 18d+02:14:21.342 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 18d+02:14:21.312 IDENTIFY DEVICE + +Error 2431 occurred at disk power-on lifetime: 36972 hours (1540 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + e7 08 98 80 c5 bd 00 00 18d+02:14:18.752 FLUSH CACHE + 61 04 90 10 04 00 40 40 18d+02:14:18.752 WRITE FPDMA QUEUED + 61 04 88 c0 1d 00 40 40 18d+02:14:18.752 WRITE FPDMA QUEUED + 61 04 80 10 04 00 40 40 18d+02:14:18.742 WRITE FPDMA QUEUED + 61 04 78 c0 1d 00 40 40 18d+02:14:18.742 WRITE FPDMA QUEUED + +Error 2430 occurred at disk power-on lifetime: 36972 hours (1540 days + 12 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER ST SC SN CL CH DH + -- -- -- -- -- -- -- + 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name + -- -- -- -- -- -- -- -- ---------------- -------------------- + e7 08 98 80 c5 bd 00 00 18d+02:14:18.752 FLUSH CACHE + 61 04 90 10 04 00 40 40 18d+02:14:18.752 WRITE FPDMA QUEUED + 61 04 88 c0 1d 00 40 40 18d+02:14:18.752 WRITE FPDMA QUEUED + 61 04 80 10 04 00 40 40 18d+02:14:18.742 WRITE FPDMA QUEUED + 61 04 78 c0 1d 00 40 40 18d+02:14:18.742 WRITE FPDMA QUEUED + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/SSD/SK hynix/SC210/SC210 mSATA 256GB/EB20FA9237FC b/SSD/SK hynix/SC210/SC210 mSATA 256GB/EB20FA9237FC new file mode 100644 index 000000000..71a425c2f --- /dev/null +++ b/SSD/SK hynix/SC210/SC210 mSATA 256GB/EB20FA9237FC @@ -0,0 +1,291 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SK hynix SATA SSDs +Device Model: SK hynix SC210 mSATA 256GB +Serial Number: -- +Firmware Version: 20001L00 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 3 19:49:41 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 5) seconds. +Offline data collection +capabilities: (0x19) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 17) minutes. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0 + 5 Retired_Block_Count -O--CK 253 253 036 - 0 + 9 Power_On_Hours -O--CK 090 090 000 - 9392 + 12 Power_Cycle_Count -O--CK 100 100 020 - 5388 +100 Total_Erase_Count -O--CK 100 100 000 - 8623088 +171 Program_Fail_Count -O--CK 253 253 000 - 0 +172 Erase_Fail_Count -O--CK 253 253 000 - 0 +174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 368 +175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0 +176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0 +177 Wear_Leveling_Count -O--CK 096 096 000 - 128 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 27 +179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 133 +180 Erase_Fail_Count -O--CK 100 100 000 - 4219 +181 Non4k_Aligned_Access -O--CK 253 253 000 - 0 +182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0 +183 SATA_Downshift_Count -O--CK 253 253 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 139 +188 Command_Timeout -O--CK 253 253 000 - 0 +191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0 +194 Temperature_Celsius -O---- 038 000 000 - 38 (Min/Max 1/68) +195 Hardware_ECC_Recovered -O--CK 100 099 000 - 295470046 +201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0 +204 Soft_ECC_Correction -OSR-- 100 100 --- - 0 +231 SSD_Life_Left PO--CK 253 253 --- - 1 +234 Unknown_SK_hynix_Attrib -O--CK 100 100 --- - 32346 +241 Total_Writes_GiB -O--CK 100 100 --- - 13374 +242 Total_Reads_GiB -O--CK 100 100 --- - 19583 +250 Read_Retry_Count -O--CK 100 100 --- - 273 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 4 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 25479 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 25479 [18] occurred at disk power-on lifetime: 9391 hours (391 days + 7 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 01 -- 50 00 01 00 00 00 00 00 01 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 00 00:54:39.280 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 00 00:54:39.280 NOP [Abort queued commands] + 25 00 00 00 21 00 00 1c 6f 30 00 40 40 00:54:17.830 READ DMA EXT + 25 00 00 01 00 00 00 1d cf 2e 20 40 40 00:54:17.830 READ DMA EXT + 25 00 00 01 00 00 00 1d cf 2c 20 40 40 00:54:17.830 READ DMA EXT + +Error 25478 [17] occurred at disk power-on lifetime: 9391 hours (391 days + 7 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 21 00 00 1c 6f 30 00 40 40 00:54:17.830 READ DMA EXT + 25 00 00 01 00 00 00 1d cf 2e 20 40 40 00:54:17.830 READ DMA EXT + 25 00 00 01 00 00 00 1d cf 2c 20 40 40 00:54:17.830 READ DMA EXT + 25 00 00 01 20 00 00 1c 6f 32 20 40 40 00:54:17.830 READ DMA EXT + 25 00 00 01 60 00 00 1c 6f 30 20 40 40 00:54:17.830 READ DMA EXT + +Error 25477 [16] occurred at disk power-on lifetime: 9391 hours (391 days + 7 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 21 00 00 1c 6f 30 00 40 40 00:54:17.830 READ DMA EXT + 25 00 00 01 00 00 00 1d cf 2e 20 40 40 00:54:17.830 READ DMA EXT + 25 00 00 01 00 00 00 1d cf 2c 20 40 40 00:54:17.830 READ DMA EXT + 25 00 00 01 20 00 00 1c 6f 32 20 40 40 00:54:17.830 READ DMA EXT + 25 00 00 01 60 00 00 1c 6f 30 20 40 40 00:54:17.830 READ DMA EXT + +Error 25476 [15] occurred at disk power-on lifetime: 9391 hours (391 days + 7 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:54:08.510 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:54:08.510 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:54:08.480 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:54:08.440 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:54:08.440 IDENTIFY DEVICE + +Error 25475 [14] occurred at disk power-on lifetime: 9391 hours (391 days + 7 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ef 00 10 00 06 00 00 00 00 00 00 00 00 00:54:08.350 SET FEATURES [Enable SATA feature] + ef 00 90 00 06 00 00 00 00 00 00 00 00 00:54:08.300 SET FEATURES [Disable SATA feature] + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:54:08.300 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:54:08.300 IDENTIFY DEVICE + ec 00 00 00 00 00 00 00 00 00 00 00 00 00:54:08.300 IDENTIFY DEVICE + +Error 25474 [13] occurred at disk power-on lifetime: 9391 hours (391 days + 7 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 a0 a0 00:53:57.240 FLUSH CACHE EXT + 60 00 08 00 b8 00 00 01 7a 88 40 40 40 00:53:57.220 READ FPDMA QUEUED + 60 00 08 00 b0 00 00 00 ba 69 10 40 40 00:53:57.220 READ FPDMA QUEUED + 60 00 08 00 a8 00 00 01 7a 88 08 40 40 00:53:57.220 READ FPDMA QUEUED + 60 00 08 00 a0 00 00 01 7a 88 98 40 40 00:53:57.220 READ FPDMA QUEUED + +Error 25473 [12] occurred at disk power-on lifetime: 9391 hours (391 days + 7 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ea 00 00 00 00 00 00 00 00 00 00 a0 a0 00:53:57.240 FLUSH CACHE EXT + 60 00 08 00 b8 00 00 01 7a 88 40 40 40 00:53:57.220 READ FPDMA QUEUED + 60 00 08 00 b0 00 00 00 ba 69 10 40 40 00:53:57.220 READ FPDMA QUEUED + 60 00 08 00 a8 00 00 01 7a 88 08 40 40 00:53:57.220 READ FPDMA QUEUED + 60 00 08 00 a0 00 00 01 7a 88 98 40 40 00:53:57.220 READ FPDMA QUEUED + +Error 25472 [11] occurred at disk power-on lifetime: 9391 hours (391 days + 7 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 25 00 00 00 40 00 00 00 0d d4 80 40 40 00:08:59.000 READ DMA EXT + 25 00 00 00 40 00 00 00 0d d4 40 40 40 00:08:59.000 READ DMA EXT + 25 00 00 00 40 00 00 00 0d d4 00 40 40 00:08:59.000 READ DMA EXT + 25 00 00 00 40 00 00 00 0d d3 c0 40 40 00:08:59.000 READ DMA EXT + 25 00 00 00 40 00 00 00 0d d3 80 40 40 00:08:59.000 READ DMA EXT + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 9178 - +# 2 Short offline Completed without error 00% 8654 - +# 3 Short offline Completed without error 00% 0 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (empty) == +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (empty) == +0x07 ===== = = === == Solid State Device Statistics (empty) == + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 22 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/SK hynix/SC311/SC311 SATA 512GB/087D47734039 b/SSD/SK hynix/SC311/SC311 SATA 512GB/087D47734039 new file mode 100644 index 000000000..916caa262 --- /dev/null +++ b/SSD/SK hynix/SC311/SC311 SATA 512GB/087D47734039 @@ -0,0 +1,201 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SK hynix SATA SSDs +Device Model: SK hynix SC311 SATA 512GB +Serial Number: -- +Firmware Version: 70000P10 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 12 14:51:09 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unknown + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 19) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 73) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 80) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0 + 5 Retired_Block_Count -O--CK 253 253 036 - 0 + 9 Power_On_Hours -O--CK 096 096 000 - 3688 + 12 Power_Cycle_Count -O--CK 100 100 020 - 1750 +100 Total_Erase_Count -O--CK 100 100 000 - 476472 +168 Min_Erase_Count -O--CK 100 100 000 - 1 +169 Max_Erase_Count -O--CK 099 099 000 - 24 +174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 80 +175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0 +176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0 +177 Wear_Leveling_Count -O--CK 100 001 000 - 8 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0 +180 Erase_Fail_Count -O--CK 100 100 000 - 1566 +181 Non4k_Aligned_Access -O--CK 253 253 000 - 0 +182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0 +184 End-to-End_Error -O--CK 253 253 000 - 0 +187 Reported_Uncorrect -O--CK 253 253 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 13 +194 Temperature_Celsius -O---- 033 014 000 - 33 (Min/Max 14/45) +195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0 +196 Reallocated_Event_Count -O--CK 253 253 036 - 0 +198 Offline_Uncorrectable -O--CK 253 253 000 - 0 +199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0 +204 Soft_ECC_Correction -OSR-- 001 001 000 - 11459 +212 Phy_Error_Count -O--CK 100 100 000 - 1125371 +233 Media_Wearout_Indicator -O--CK 001 001 000 - 100 +234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 8539393408 +241 Total_Writes_GiB -O--CK 100 100 000 - 20151345753 +242 Total_Reads_GiB -O--CK 100 100 000 - 15702692505 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 4 Comprehensive SMART error log +0x03 GPL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 2 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL R/O 8 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 30% 22 - + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 28/39 Celsius +Lifetime Min/Max Temperature: 14/45 Celsius +Specified Max Operating Temperature: 80 Celsius +Under/Over Temperature Limit Count: 248/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -20/80 Celsius +Min/Max Temperature Limit: -20/125 Celsius +Temperature History Size (Index): 192 (190) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1750 --- Lifetime Power-On Resets +0x01 0x010 4 3688 --- Power-on Hours +0x01 0x018 6 20151345753 --- Logical Sectors Written +0x01 0x020 6 404218089 --- Number of Write Commands +0x01 0x028 6 15702692505 --- Logical Sectors Read +0x01 0x030 6 253733314 --- Number of Read Commands +0x01 0x038 6 391898112 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 13 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 33 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 20 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 80 --- Specified Maximum Operating Temperature +0x05 0x060 4 204310 --- Time in Under-Temperature +0x05 0x068 1 -20 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7197 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/SPCC/Solid State Disk/Solid State Disk 1TB/12B685A62CF8 b/SSD/SPCC/Solid State Disk/Solid State Disk 1TB/12B685A62CF8 new file mode 100644 index 000000000..81cc3f33b --- /dev/null +++ b/SSD/SPCC/Solid State Disk/Solid State Disk 1TB/12B685A62CF8 @@ -0,0 +1,156 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SPCC Solid State Disk +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: SBFMBA.3 +User Capacity: 1,024,209,543,168 bytes [1.02 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:13:58 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65535) seconds. +Offline data collection +capabilities: (0x79) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 30) minutes. +Conveyance self-test routine +recommended polling time: ( 6) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 14809 + 12 Power_Cycle_Count -O--C- 100 100 000 - 65 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +170 Unknown_Attribute PO---- 085 085 010 - 4294967620 +173 Unknown_Attribute -O--C- 100 100 000 - 8716448 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 49 +194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) +218 Unknown_Attribute PO-R-- 100 100 050 - 0 +231 Unknown_SSD_Attribute PO--C- 100 100 000 - 86 +241 Total_LBAs_Written -O--C- 100 100 000 - 31204 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 65 --- Lifetime Power-On Resets +0x01 0x010 4 14809 --- Power-on Hours +0x01 0x018 6 65439762698 --- Logical Sectors Written +0x01 0x028 6 25321379044 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 33 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 13 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/MZ7/MZ7LM240HCGR-0E003/0408D44370D6 b/SSD/Samsung/MZ7/MZ7LM240HCGR-0E003/0408D44370D6 new file mode 100644 index 000000000..ffd9cdca9 --- /dev/null +++ b/SSD/Samsung/MZ7/MZ7LM240HCGR-0E003/0408D44370D6 @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG MZ7LM240HCGR-0E003 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: GXT3003Q +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:28:52 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1740) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 29) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 093 093 000 - 31087 + 12 Power_Cycle_Count -O--CK 099 099 000 - 18 +177 Wear_Leveling_Count PO--C- 096 096 005 - 288 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 1230 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 068 059 000 - 32 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +202 Exception_Mode_Status PO--CK 100 100 010 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 7 +241 Total_LBAs_Written -O--CK 099 099 000 - 123831651598 +242 Total_LBAs_Read -O--CK 099 099 000 - 4299473259 +243 SATA_Downshift_Ct -O--CK 100 100 000 - 0 +244 Thermal_Throttle_St -O--CK 100 100 000 - 0 +245 Timed_Workld_Media_Wear -O--CK 100 100 000 - 65535 +246 Timed_Workld_RdWr_Ratio -O--CK 100 100 000 - 65535 +247 Timed_Workld_Timer -O--CK 100 100 000 - 65535 +251 NAND_Writes -O--CK 100 100 000 - 148935440024 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 31082 - +# 2 Short offline Completed without error 00% 31058 - +# 3 Short offline Completed without error 00% 31034 - +# 4 Short offline Completed without error 00% 31010 - +# 5 Short offline Completed without error 00% 30986 - +# 6 Short offline Completed without error 00% 30962 - +# 7 Short offline Completed without error 00% 30938 - +# 8 Short offline Completed without error 00% 30914 - +# 9 Short offline Completed without error 00% 30890 - +#10 Short offline Completed without error 00% 30866 - +#11 Short offline Completed without error 00% 30842 - +#12 Short offline Completed without error 00% 30818 - +#13 Short offline Completed without error 00% 30794 - +#14 Short offline Completed without error 00% 30770 - +#15 Short offline Completed without error 00% 30746 - +#16 Short offline Completed without error 00% 30722 - +#17 Short offline Completed without error 00% 30698 - +#18 Short offline Completed without error 00% 30674 - +#19 Short offline Completed without error 00% 30650 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was completed without error +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 30/36 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294965247/4294967295 + +SCT Temperature History Version: 3 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (88) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 48 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 48 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/MZ7/MZ7LM240HCGR-0E003/80B6DA8D9C6D b/SSD/Samsung/MZ7/MZ7LM240HCGR-0E003/80B6DA8D9C6D new file mode 100644 index 000000000..a5a2201da --- /dev/null +++ b/SSD/Samsung/MZ7/MZ7LM240HCGR-0E003/80B6DA8D9C6D @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG MZ7LM240HCGR-0E003 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: GXT3003Q +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:28:52 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 1740) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 29) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 093 093 000 - 31087 + 12 Power_Cycle_Count -O--CK 099 099 000 - 18 +177 Wear_Leveling_Count PO--C- 096 096 005 - 288 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 1229 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 068 059 000 - 32 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +197 Current_Pending_Sector -O--CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +202 Exception_Mode_Status PO--CK 100 100 010 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 7 +241 Total_LBAs_Written -O--CK 099 099 000 - 123837276491 +242 Total_LBAs_Read -O--CK 099 099 000 - 4328113972 +243 SATA_Downshift_Ct -O--CK 100 100 000 - 0 +244 Thermal_Throttle_St -O--CK 100 100 000 - 0 +245 Timed_Workld_Media_Wear -O--CK 100 100 000 - 65535 +246 Timed_Workld_RdWr_Ratio -O--CK 100 100 000 - 65535 +247 Timed_Workld_Timer -O--CK 100 100 000 - 65535 +251 NAND_Writes -O--CK 100 100 000 - 148950288448 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 31082 - +# 2 Short offline Completed without error 00% 31058 - +# 3 Short offline Completed without error 00% 31034 - +# 4 Short offline Completed without error 00% 31010 - +# 5 Short offline Completed without error 00% 30986 - +# 6 Short offline Completed without error 00% 30962 - +# 7 Short offline Completed without error 00% 30938 - +# 8 Short offline Completed without error 00% 30914 - +# 9 Short offline Completed without error 00% 30890 - +#10 Short offline Completed without error 00% 30866 - +#11 Short offline Completed without error 00% 30842 - +#12 Short offline Completed without error 00% 30818 - +#13 Short offline Completed without error 00% 30794 - +#14 Short offline Completed without error 00% 30770 - +#15 Short offline Completed without error 00% 30746 - +#16 Short offline Completed without error 00% 30722 - +#17 Short offline Completed without error 00% 30698 - +#18 Short offline Completed without error 00% 30674 - +#19 Short offline Completed without error 00% 30650 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was completed without error +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 30/36 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294967295/4294967295 + +SCT Temperature History Version: 3 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (88) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 58 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 58 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/MZ7/MZ7LN256HCHP-000L7/24DBE21D69B6 b/SSD/Samsung/MZ7/MZ7LN256HCHP-000L7/24DBE21D69B6 new file mode 100644 index 000000000..844fca854 --- /dev/null +++ b/SSD/Samsung/MZ7/MZ7LN256HCHP-000L7/24DBE21D69B6 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG MZ7LN256HCHP-000L7 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT03L6Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 18 20:14:40 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 4908 + 12 Power_Cycle_Count -O--CK 097 097 000 - 2862 +170 Unused_Rsvd_Blk_Ct_Chip -O--CK 100 100 010 - 0 +171 Program_Fail_Count_Chip -O--CK 100 100 010 - 0 +172 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 +173 Wear_Leveling_Count PO--CK 096 096 005 - 70 +174 Unexpect_Power_Loss_Ct -O--CK 099 099 000 - 40 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 742 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O--CK 068 047 000 - 32 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +233 Media_Wearout_Indicator PO--C- 096 096 000 - 16190012 +241 Total_LBAs_Written -O--CK 099 099 000 - 4852 +242 Total_LBAs_Read -O--CK 099 099 000 - 4688 +249 Unknown_Samsung_Attr -O--CK 099 099 000 - 18080 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 32/40 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294967295/4294901760 +SMART Status: 0xffff (Reserved) + +SCT Temperature History Version: 3 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/MZ7/MZ7LN512HMJP-000L7/F794C0122AE8 b/SSD/Samsung/MZ7/MZ7LN512HMJP-000L7/F794C0122AE8 new file mode 100644 index 000000000..22b1e42eb --- /dev/null +++ b/SSD/Samsung/MZ7/MZ7LN512HMJP-000L7/F794C0122AE8 @@ -0,0 +1,98 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG MZ7LN512HMJP-000L7 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: MAV01L6Q +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 08:19:53 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 11596 + 12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 4383 +170 Unused_Rsvd_Blk_Ct_Chip 0x0032 100 100 010 Old_age Always - 0 +171 Program_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +172 Erase_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +173 Wear_Leveling_Count 0x0033 090 090 005 Pre-fail Always - 127 +174 Unexpect_Power_Loss_Ct 0x0032 099 099 000 Old_age Always - 147 +178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 1624 +184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0032 066 048 000 Old_age Always - 34 (Min/Max 8/52) +199 CRC_Error_Count 0x003e 099 099 000 Old_age Always - 123 +233 Media_Wearout_Indicator 0x0013 089 089 001 Pre-fail Always - 15001626 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 19733 +242 Total_LBAs_Read 0x0032 099 099 000 Old_age Always - 8457 +249 Unknown_Samsung_Attr 0x0032 099 099 000 Old_age Always - 65120 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 10428 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Samsung/MZ7/MZ7TD256HAFV-000L7/0F1341E4655F b/SSD/Samsung/MZ7/MZ7TD256HAFV-000L7/0F1341E4655F new file mode 100644 index 000000000..c73a4516e --- /dev/null +++ b/SSD/Samsung/MZ7/MZ7TD256HAFV-000L7/0F1341E4655F @@ -0,0 +1,107 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG MZ7TD256HAFV-000L7 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: DXT04L6Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 12:13:38 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (53956) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 40) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 49255 + 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1096 +175 Program_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +177 Wear_Leveling_Count 0x0013 011 011 005 Pre-fail Always - 1078 +178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 6240 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 060 043 000 Old_age Always - 40 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 +199 CRC_Error_Count 0x003e 253 253 000 Old_age Always - 1 +233 Media_Wearout_Indicator 0x003a 199 199 000 Old_age Always - 17485547 +234 Unknown_Samsung_Attr 0x0012 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 395 +236 Unknown_Samsung_Attr 0x0012 099 099 000 Old_age Always - 981 +237 Unknown_Samsung_Attr 0x0012 099 099 000 Old_age Always - 1078 +238 Unknown_Samsung_Attr 0x0012 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 4 - +# 2 Short offline Completed without error 00% 151 - +# 3 Short offline Completed without error 00% 151 - +# 4 Offline Completed without error 00% 151 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/MZHPV256/MZHPV256HDGL-000L1/BCC170651BDD b/SSD/Samsung/MZHPV256/MZHPV256HDGL-000L1/BCC170651BDD new file mode 100644 index 000000000..f9e88fc7d --- /dev/null +++ b/SSD/Samsung/MZHPV256/MZHPV256HDGL-000L1/BCC170651BDD @@ -0,0 +1,100 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG MZHPV256HDGL-000L1 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXW22L0Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 10:34:48 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 20) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3151 + 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1167 +170 Unused_Rsvd_Blk_Ct_Chip 0x0032 100 100 010 Old_age Always - 0 +171 Program_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +172 Erase_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +173 Wear_Leveling_Count 0x0033 097 097 005 Pre-fail Always - 72 +174 Unexpect_Power_Loss_Ct 0x0032 099 099 000 Old_age Always - 91 +178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 850 +184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0032 063 044 000 Old_age Always - 37 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +233 Media_Wearout_Indicator 0x0032 099 099 000 Old_age Always - 18528 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 8076 +242 Total_LBAs_Read 0x0032 099 099 000 Old_age Always - 4775 + +SMART Error Log Version: 1 +No Errors Logged + +Warning! SMART Self-Test Log Structure error: invalid SMART checksum. +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 3 - + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/MZHPV512/MZHPV512HDGL-00000/803BF178BE13 b/SSD/Samsung/MZHPV512/MZHPV512HDGL-00000/803BF178BE13 new file mode 100644 index 000000000..dc802776f --- /dev/null +++ b/SSD/Samsung/MZHPV512/MZHPV512HDGL-00000/803BF178BE13 @@ -0,0 +1,97 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG MZHPV512HDGL-00000 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXW2500Q +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 13 06:30:55 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 35) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 38 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 22 +170 Unused_Rsvd_Blk_Ct_Chip 0x0032 100 100 010 Old_age Always - 0 +171 Program_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +172 Erase_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +173 Wear_Leveling_Count 0x0033 099 099 005 Pre-fail Always - 1 +174 Unexpect_Power_Loss_Ct 0x0032 099 099 000 Old_age Always - 2 +178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 1741 +184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0032 064 058 000 Old_age Always - 36 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +233 Media_Wearout_Indicator 0x0032 099 099 000 Old_age Always - 638 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 638 +242 Total_LBAs_Read 0x0032 099 099 000 Old_age Always - 79 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/MZHPV512/MZHPV512HDGL-000L1/CC7C184273CD b/SSD/Samsung/MZHPV512/MZHPV512HDGL-000L1/CC7C184273CD new file mode 100644 index 000000000..4dceb94df --- /dev/null +++ b/SSD/Samsung/MZHPV512/MZHPV512HDGL-000L1/CC7C184273CD @@ -0,0 +1,152 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG MZHPV512HDGL-000L1 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: BXW25L0Q +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 17:35:37 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: ENABLED, PW level MAX, not locked, frozen [SEC6] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 35) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 098 098 000 - 5331 + 12 Power_Cycle_Count -O--CK 095 095 000 - 4845 +170 Unused_Rsvd_Blk_Ct_Chip -O--CK 100 100 010 - 0 +171 Program_Fail_Count_Chip -O--CK 100 100 010 - 0 +172 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 +173 Wear_Leveling_Count PO--CK 097 097 005 - 80 +174 Unexpect_Power_Loss_Ct -O--CK 099 099 000 - 18 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 1571 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O--CK 065 039 000 - 35 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +233 Media_Wearout_Indicator -O--CK 099 099 000 - 41176 +241 Total_LBAs_Written -O--CK 099 099 000 - 12473 +242 Total_LBAs_Read -O--CK 099 099 000 - 20116 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL VS 1 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 33/43 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294967295/4294901760 +SMART Status: 0xffff (Reserved) + +SCT Temperature History Version: 3 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (37) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x000a 4 12 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Samsung/MZMPC032/MZMPC032HBCD-00000/220E1467B379 b/SSD/Samsung/MZMPC032/MZMPC032HBCD-00000/220E1467B379 new file mode 100644 index 000000000..220d01df3 --- /dev/null +++ b/SSD/Samsung/MZMPC032/MZMPC032HBCD-00000/220E1467B379 @@ -0,0 +1,142 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: MZMPC032HBCD-00000 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: CXM1201Q +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 2 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 21:59:31 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 180) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 096 096 000 - 17324 + 12 Power_Cycle_Count -O--CK 099 099 000 - 78 +177 Wear_Leveling_Count PO--C- 095 095 000 - 148 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 089 089 010 - 86 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 089 089 010 - 730 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 042 029 000 - 58 +195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 253 253 000 - 0 +235 Unknown_Attribute -O--C- 099 099 000 - 18 +241 Total_LBAs_Written -O--CK 099 099 000 - 8046299716 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 2 Comprehensive SMART error log +0x03 GPL,SL R/O 2 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 36 - +# 2 Short offline Completed without error 00% 32 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 49152 R_ERR response for data FIS +0x0003 2 53248 R_ERR response for device-to-host data FIS +0x0004 2 57344 R_ERR response for host-to-device data FIS +0x0005 2 7952 R_ERR response for non-data FIS +0x0006 2 2562 R_ERR response for device-to-host non-data FIS +0x0007 2 4096 R_ERR response for host-to-device non-data FIS +0x0008 2 7952 Device-to-host non-data FIS retries +0x0009 2 7953 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 375 Device-to-host register FISes sent due to a COMRESET +0x000b 2 6145 CRC errors within host-to-device FIS +0x000d 2 7953 Non-CRC errors within host-to-device FIS +0x000f 2 8176 R_ERR response for host-to-device data FIS, CRC +0x0010 2 15 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 49153 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 12112 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/MZMTE512/MZMTE512HMHP-000MV/CAA64AA7509A b/SSD/Samsung/MZMTE512/MZMTE512HMHP-000MV/CAA64AA7509A new file mode 100644 index 000000000..264c3dd47 --- /dev/null +++ b/SSD/Samsung/MZMTE512/MZMTE512HMHP-000MV/CAA64AA7509A @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SAMSUNG MZMTE512HMHP-000MV +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXT42M0Q +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 14:23:42 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 110) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 091 091 000 - 40737 + 12 Power_Cycle_Count -O--CK 099 099 000 - 171 +177 Wear_Leveling_Count PO--C- 095 095 000 - 95 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 100 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +183 Runtime_Bad_Block PO--C- 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 071 052 000 - 29 +195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 3 +235 Unknown_Attribute -O--C- 099 099 000 - 81 +241 Total_LBAs_Written -O--CK 099 099 000 - 61581045244 +242 Total_LBAs_Read -O--CK 099 099 000 - 35520300558 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/179943 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (124) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/MZMTE512/MZMTE512HMHP-000MV/FE966AF9D066 b/SSD/Samsung/MZMTE512/MZMTE512HMHP-000MV/FE966AF9D066 new file mode 100644 index 000000000..1d9a090f7 --- /dev/null +++ b/SSD/Samsung/MZMTE512/MZMTE512HMHP-000MV/FE966AF9D066 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SAMSUNG MZMTE512HMHP-000MV +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXT42M0Q +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 14:23:43 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 110) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 35734 + 12 Power_Cycle_Count -O--CK 099 099 000 - 153 +177 Wear_Leveling_Count PO--C- 097 097 000 - 97 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 100 +181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 +183 Runtime_Bad_Block PO--C- 100 100 000 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 063 049 000 - 37 +195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +235 Unknown_Attribute -O--C- 099 099 000 - 45 +241 Total_LBAs_Written -O--CK 099 099 000 - 27424300478 +242 Total_LBAs_Read -O--CK 099 099 000 - 4467000692 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/156998 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (124) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 0 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/MZNLH512/MZNLH512HALU-00000/D692FC1C54FF b/SSD/Samsung/MZNLH512/MZNLH512HALU-00000/D692FC1C54FF new file mode 100644 index 000000000..11cc5b677 --- /dev/null +++ b/SSD/Samsung/MZNLH512/MZNLH512HALU-00000/D692FC1C54FF @@ -0,0 +1,201 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SAMSUNG MZNLH512HALU-00000 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT2200Q +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 24 00:53:24 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 44 + 12 Power_Cycle_Count -O--CK 099 099 000 - 64 +170 Unknown_Attribute -O--CK 100 100 010 - 0 +171 Unknown_Attribute -O--CK 100 100 010 - 0 +172 Unknown_Attribute -O--CK 100 100 010 - 0 +173 Unknown_Attribute PO--CK 099 099 005 - 1 +174 Unknown_Attribute -O--CK 099 099 000 - 11 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 958 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O--CK 062 042 000 - 38 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +233 Media_Wearout_Indicator PO--C- 099 099 000 - 16767403 +241 Total_LBAs_Written -O--CK 099 099 000 - 519 +242 Total_LBAs_Read -O--CK 099 099 000 - 414 +249 Unknown_Attribute -O--CK 099 099 000 - 563 +250 Read_Error_Retry_Rate -O--CK 099 099 000 - 1090068784 +251 Unknown_Attribute -O--CK 099 099 000 - 1181759744 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 38 Celsius +Power Cycle Min/Max Temperature: 26/43 Celsius +Lifetime Min/Max Temperature: 31/58 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (120) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 64 --- Lifetime Power-On Resets +0x01 0x010 4 44 --- Power-on Hours +0x01 0x018 6 1090068784 --- Logical Sectors Written +0x01 0x020 6 10106785 --- Number of Write Commands +0x01 0x028 6 868285188 --- Logical Sectors Read +0x01 0x030 6 7964975 --- Number of Read Commands +0x01 0x038 6 2409000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 31 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 702 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 19 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/MZNLN256/MZNLN256HAJQ-000L7/B8BC21B23C75 b/SSD/Samsung/MZNLN256/MZNLN256HAJQ-000L7/B8BC21B23C75 new file mode 100644 index 000000000..67ec878cd --- /dev/null +++ b/SSD/Samsung/MZNLN256/MZNLN256HAJQ-000L7/B8BC21B23C75 @@ -0,0 +1,198 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG MZNLN256HAJQ-000L7 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: MVT24L6Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 29 15:00:09 2020 CST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 342 + 12 Power_Cycle_Count -O--CK 092 092 000 - 7254 +170 Unused_Rsvd_Blk_Ct_Chip -O--CK 100 100 010 - 0 +171 Program_Fail_Count_Chip -O--CK 100 100 010 - 0 +172 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 +173 Wear_Leveling_Count PO--CK 099 099 005 - 4 +174 Unexpect_Power_Loss_Ct -O--CK 099 099 000 - 48 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 617 +184 End-to-End_Error PO--CK 100 100 097 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O--CK 058 048 000 - 42 (Min/Max 8/52) +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +233 Media_Wearout_Indicator PO--C- 099 099 001 - 16721290 +234 Unknown_Samsung_Attr -O--CK 100 100 000 - 0 +241 Total_LBAs_Written -O--CK 099 099 000 - 2057 +242 Total_LBAs_Read -O--CK 099 099 000 - 2624 +249 Unknown_Samsung_Attr -O--CK 099 099 000 - 3005 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: ?/46 Celsius +Lifetime Min/Max Temperature: 24/51 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (111) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 7254 --- Lifetime Power-On Resets +0x01 0x010 4 342 --- Power-on Hours +0x01 0x018 6 4314214001 --- Logical Sectors Written +0x01 0x020 6 0 --- Number of Write Commands +0x01 0x028 6 5503659160 --- Logical Sectors Read +0x01 0x030 6 0 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 402 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 42 --- Current Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 22557 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 21 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/MZNLN256/MZNLN256HCHP-000L7/7CE95FC8A056 b/SSD/Samsung/MZNLN256/MZNLN256HCHP-000L7/7CE95FC8A056 new file mode 100644 index 000000000..3cbf64ad8 --- /dev/null +++ b/SSD/Samsung/MZNLN256/MZNLN256HCHP-000L7/7CE95FC8A056 @@ -0,0 +1,99 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG MZNLN256HCHP-000L7 +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT22L6Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 22 22:02:24 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 14294 + 12 Power_Cycle_Count 0x0032 077 077 000 Old_age Always - 23162 +170 Unused_Rsvd_Blk_Ct_Chip 0x0032 100 100 010 Old_age Always - 0 +171 Program_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +172 Erase_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 +173 Wear_Leveling_Count 0x0033 083 083 005 Pre-fail Always - 357 +174 Unexpect_Power_Loss_Ct 0x0032 099 099 000 Old_age Always - 92 +178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 755 +184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +194 Temperature_Celsius 0x0032 061 042 000 Old_age Always - 39 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +233 Media_Wearout_Indicator 0x0013 082 082 000 Pre-fail Always - 13782482 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 13702 +242 Total_LBAs_Read 0x0032 099 099 000 Old_age Always - 10168 +249 Unknown_Samsung_Attr 0x0032 099 099 000 Old_age Always - 91504 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 750/SSD 750 EVO 120GB/BEF56A198B40 b/SSD/Samsung/SSD 750/SSD 750 EVO 120GB/BEF56A198B40 new file mode 100644 index 000000000..5372fb540 --- /dev/null +++ b/SSD/Samsung/SSD 750/SSD 750 EVO 120GB/BEF56A198B40 @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 750 EVO 120GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: MAT01B6Q +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:18:07 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 64) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 093 093 000 - 34222 + 12 Power_Cycle_Count -O--CK 099 099 000 - 46 +177 Wear_Leveling_Count PO--C- 092 092 000 - 40 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 099 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 067 057 000 - 33 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 099 099 000 - 3 +235 POR_Recovery_Count -O--C- 099 099 000 - 21 +241 Total_LBAs_Written -O--CK 099 099 000 - 20158978281 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 23/42 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294967295/4294901760 +SMART Status: 0xffff (Reserved) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (89) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 750/SSD 750 EVO 500GB/E986880A1A11 b/SSD/Samsung/SSD 750/SSD 750 EVO 500GB/E986880A1A11 new file mode 100644 index 000000000..793ac6c7b --- /dev/null +++ b/SSD/Samsung/SSD 750/SSD 750 EVO 500GB/E986880A1A11 @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 750 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: MAT01B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 27 17:18:59 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 20496 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1052 +177 Wear_Leveling_Count PO--C- 092 092 000 - 40 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 072 051 000 - 28 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 66 +241 Total_LBAs_Written -O--CK 099 099 000 - 26889419807 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 28/40 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294967295/4294901760 +SMART Status: 0xffff (Reserved) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (3) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 840/SSD 840 EVO 120GB/4A260925ACF8 b/SSD/Samsung/SSD 840/SSD 840 EVO 120GB/4A260925ACF8 new file mode 100644 index 000000000..accb22c11 --- /dev/null +++ b/SSD/Samsung/SSD 840/SSD 840 EVO 120GB/4A260925ACF8 @@ -0,0 +1,93 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 840 EVO 120GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXT0BB6Q +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 15:46:41 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4200) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 70) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 64165 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 213 +177 Wear_Leveling_Count 0x0013 097 097 000 Pre-fail Always - 36 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 050 041 000 Old_age Always - 50 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 122 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 15492760565 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 840/SSD 840 EVO 120GB/F115D96E1483 b/SSD/Samsung/SSD 840/SSD 840 EVO 120GB/F115D96E1483 new file mode 100644 index 000000000..bb7f681e4 --- /dev/null +++ b/SSD/Samsung/SSD 840/SSD 840 EVO 120GB/F115D96E1483 @@ -0,0 +1,164 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 840 EVO 120GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXT0BB0Q +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 07:45:53 2020 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4200) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 70) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 080 080 000 - 100355 + 12 Power_Cycle_Count -O--CK 099 099 000 - 46 +177 Wear_Leveling_Count PO--C- 094 094 000 - 69 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 076 050 000 - 24 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 099 099 000 - 1 +235 POR_Recovery_Count -O--C- 099 099 000 - 22 +241 Total_LBAs_Written -O--CK 099 099 000 - 28362116562 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 24 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/351584 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (7) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 39 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 39 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 840/SSD 840 EVO 1TB/D7E529879A58 b/SSD/Samsung/SSD 840/SSD 840 EVO 1TB/D7E529879A58 new file mode 100644 index 000000000..4065f53db --- /dev/null +++ b/SSD/Samsung/SSD 840/SSD 840 EVO 1TB/D7E529879A58 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 840 EVO 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXT0CB6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 15 11:39:31 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (15000) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 250) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 096 096 000 - 17456 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1593 +177 Wear_Leveling_Count PO--C- 099 099 000 - 7 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 066 050 000 - 34 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 1330 +241 Total_LBAs_Written -O--CK 099 099 000 - 17693823036 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log +0xde SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/121992 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (0) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 840/SSD 840 EVO 250GB/568A4515E0F7 b/SSD/Samsung/SSD 840/SSD 840 EVO 250GB/568A4515E0F7 new file mode 100644 index 000000000..3b9a5cf82 --- /dev/null +++ b/SSD/Samsung/SSD 840/SSD 840 EVO 250GB/568A4515E0F7 @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 840 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXT0CB6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Nov 2 17:19:53 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4800) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 80) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 098 098 000 - 9786 + 12 Power_Cycle_Count -O--CK 097 097 000 - 2937 +177 Wear_Leveling_Count PO--C- 096 096 000 - 44 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 063 043 000 - 37 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 257 +241 Total_LBAs_Written -O--CK 099 099 000 - 8810331745 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - +# 2 Short offline Completed without error 00% 0 - +# 3 Short offline Completed without error 00% 0 - +# 4 Short offline Completed without error 00% 0 - +# 5 Short offline Completed without error 00% 0 - +# 6 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/58404 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (63) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 64 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 53 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 840/SSD 840 EVO 250GB/C22F779B83C5 b/SSD/Samsung/SSD 840/SSD 840 EVO 250GB/C22F779B83C5 new file mode 100644 index 000000000..1bdc3bd0a --- /dev/null +++ b/SSD/Samsung/SSD 840/SSD 840 EVO 250GB/C22F779B83C5 @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 840 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXT0DB6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 2 00:04:43 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4800) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 80) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 094 094 000 - 26217 + 12 Power_Cycle_Count -O--CK 097 097 000 - 2100 +177 Wear_Leveling_Count PO--C- 095 095 000 - 51 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 064 043 000 - 36 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 39 +241 Total_LBAs_Written -O--CK 099 099 000 - 25683290880 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log +0xde SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/150256 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (1) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 840/SSD 840 EVO 250GB/D1206ACBB221 b/SSD/Samsung/SSD 840/SSD 840 EVO 250GB/D1206ACBB221 new file mode 100644 index 000000000..c0b31f06a --- /dev/null +++ b/SSD/Samsung/SSD 840/SSD 840 EVO 250GB/D1206ACBB221 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.2-RELEASE-p20-HBSD amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 840 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXT0BB6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 8 18:06:16 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4800) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 80) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 13683 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1196 +177 Wear_Leveling_Count PO--C- 095 095 000 - 55 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 071 052 000 - 29 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 205 +241 Total_LBAs_Written -O--CK 099 099 000 - 54673976412 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/60610 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (105) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 33 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 33 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 840/SSD 840 PRO Series 128GB/EAFB5D1B1F26 b/SSD/Samsung/SSD 840/SSD 840 PRO Series 128GB/EAFB5D1B1F26 new file mode 100644 index 000000000..d24804a25 --- /dev/null +++ b/SSD/Samsung/SSD 840/SSD 840 PRO Series 128GB/EAFB5D1B1F26 @@ -0,0 +1,163 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 840 PRO Series +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: DXM06B0Q +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 06:45:42 2020 NZDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (65476) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 15) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 088 088 000 - 59688 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1037 +177 Wear_Leveling_Count PO--C- 088 088 000 - 434 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 071 060 000 - 29 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 383 +241 Total_LBAs_Written -O--CK 099 099 000 - 33657897890 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 1 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 25/40 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 3 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (111) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 23 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 840/SSD 840 PRO Series 256GB/36DAD5C5A950 b/SSD/Samsung/SSD 840/SSD 840 PRO Series 256GB/36DAD5C5A950 new file mode 100644 index 000000000..1008ce544 --- /dev/null +++ b/SSD/Samsung/SSD 840/SSD 840 PRO Series 256GB/36DAD5C5A950 @@ -0,0 +1,161 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 840 PRO Series +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: DXM05B0Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Jun 29 02:47:04 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: (53956) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 20) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 089 089 000 - 50956 + 12 Power_Cycle_Count -O--CK 099 099 000 - 475 +177 Wear_Leveling_Count PO--C- 093 093 000 - 225 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 058 048 000 - 42 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 099 099 000 - 4 +235 POR_Recovery_Count -O--C- 099 099 000 - 148 +241 Total_LBAs_Written -O--CK 099 099 000 - 26924382501 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 1 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 42 Celsius +Power Cycle Min/Max Temperature: 38/42 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 3 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (2) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 840/SSD 840 Series 250GB/0C1C6E544534 b/SSD/Samsung/SSD 840/SSD 840 Series 250GB/0C1C6E544534 new file mode 100644 index 000000000..95668a46b --- /dev/null +++ b/SSD/Samsung/SSD 840/SSD 840 Series 250GB/0C1C6E544534 @@ -0,0 +1,163 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 840 Series +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Add. Product Id: 00000000 +Firmware Version: DXT06B0Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:47:36 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 4320) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 40) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 088 088 000 - 58318 + 12 Power_Cycle_Count -O--CK 099 099 000 - 430 +177 Wear_Leveling_Count PO--C- 070 070 000 - 294 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 071 001 000 - 29 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 130 +241 Total_LBAs_Written -O--CK 099 099 000 - 6085774231 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa0 GPL,SL VS 16 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 27/40 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 3 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (82) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 120GB/747473535E95 b/SSD/Samsung/SSD 850/SSD 850 EVO 120GB/747473535E95 new file mode 100644 index 000000000..a725794b6 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 120GB/747473535E95 @@ -0,0 +1,164 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 120GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT01B6Q +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Jul 14 00:43:13 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Write SCT (Get) Feature Control Command failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 64) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 3685 + 12 Power_Cycle_Count -O--CK 097 097 000 - 2345 +177 Wear_Leveling_Count PO--C- 098 098 000 - 26 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 063 052 000 - 37 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 101 +241 Total_LBAs_Written -O--CK 099 099 000 - 5845707070 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 34/40 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 1/0 + +Write SCT Data Table failed: Input/output error +Read SCT Temperature History failed + +Write SCT (Get) Error Recovery Control Command failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 1TB/D90BEB820BB4 b/SSD/Samsung/SSD 850/SSD 850 EVO 1TB/D90BEB820BB4 new file mode 100644 index 000000000..74f262f34 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 1TB/D90BEB820BB4 @@ -0,0 +1,95 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT02B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 12:37:23 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 512) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 15305 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 136 +177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 7 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 063 045 000 Old_age Always - 37 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 104 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 8306474548 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 1TB/F8026E24FE7A b/SSD/Samsung/SSD 850/SSD 850 EVO 1TB/F8026E24FE7A new file mode 100644 index 000000000..7e8c34eef --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 1TB/F8026E24FE7A @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT01B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 12:24:46 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 530) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 094 094 000 - 28794 + 12 Power_Cycle_Count -O--CK 096 096 000 - 3144 +177 Wear_Leveling_Count PO--C- 096 096 000 - 65 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 059 044 000 - 41 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 63 +241 Total_LBAs_Written -O--CK 099 099 000 - 46032091602 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xa5 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 41 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/165596 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (14) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/0A8E4179EFD0 b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/0A8E4179EFD0 new file mode 100644 index 000000000..ea1fe946f --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/0A8E4179EFD0 @@ -0,0 +1,94 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT02B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 21:51:16 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 10152 + 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1473 +177 Wear_Leveling_Count 0x0013 096 096 000 Pre-fail Always - 79 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 068 047 000 Old_age Always - 32 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 20 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 33854066453 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Interrupted (host reset) 60% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/2A18FC6099C0 b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/2A18FC6099C0 new file mode 100644 index 000000000..b6695fb98 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/2A18FC6099C0 @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT arm64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT02B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Sep 15 09:00:05 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 093 093 000 - 32018 + 12 Power_Cycle_Count -O--CK 099 099 000 - 611 +177 Wear_Leveling_Count PO--C- 098 098 000 - 27 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 065 047 000 - 35 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 099 099 000 - 13 +235 POR_Recovery_Count -O--C- 099 099 000 - 601 +241 Total_LBAs_Written -O--CK 099 099 000 - 45557755015 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: ?/53 Celsius +Lifetime Min/Max Temperature: 19/53 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (99) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 36 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 36 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/2CB3B3F06CFF b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/2CB3B3F06CFF new file mode 100644 index 000000000..6753b8d10 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/2CB3B3F06CFF @@ -0,0 +1,171 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT02B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 22 22:27:48 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 2493 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1143 +177 Wear_Leveling_Count PO--C- 098 098 000 - 34 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 070 048 000 - 30 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 099 099 000 - 835 +235 POR_Recovery_Count -O--C- 099 099 000 - 36 +241 Total_LBAs_Written -O--CK 099 099 000 - 16898278626 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 1 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 29/40 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294967295/4294901760 +SMART Status: 0xffff (Reserved) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (86) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 34 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 34 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/725466A2F3DA b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/725466A2F3DA new file mode 100644 index 000000000..e3f87d716 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/725466A2F3DA @@ -0,0 +1,170 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT01B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 10:20:09 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 35641 + 12 Power_Cycle_Count -O--CK 099 099 000 - 238 +177 Wear_Leveling_Count PO--C- 089 089 000 - 234 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 065 047 000 - 35 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 099 099 000 - 1 +235 POR_Recovery_Count -O--C- 099 099 000 - 116 +241 Total_LBAs_Written -O--CK 099 099 000 - 28772531172 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 29974 - + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 28/40 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294967295/4294901760 +SMART Status: 0xffff (Reserved) + +SCT Temperature History Version: 3 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (20) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/85F887DE5917 b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/85F887DE5917 new file mode 100644 index 000000000..1a190a117 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/85F887DE5917 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT01B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 28 16:15:02 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 10703 + 12 Power_Cycle_Count -O--CK 061 061 000 - 39141 +177 Wear_Leveling_Count PO--C- 089 089 000 - 221 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 074 047 000 - 26 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 588 +241 Total_LBAs_Written -O--CK 099 099 000 - 109854938259 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 26 Celsius +Power Cycle Min/Max Temperature: 24/40 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294967295/4294901760 +SMART Status: 0xffff (Reserved) + +SCT Temperature History Version: 3 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (31) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 9 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/C65EBB8F793A b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/C65EBB8F793A new file mode 100644 index 000000000..333764c43 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/C65EBB8F793A @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT02B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 8 13:34:20 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 10558 + 12 Power_Cycle_Count -O--CK 097 097 000 - 2802 +177 Wear_Leveling_Count PO--C- 097 097 000 - 43 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 066 054 000 - 34 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 1117 +241 Total_LBAs_Written -O--CK 099 099 000 - 28643771959 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 34/34 Celsius +Lifetime Min/Max Temperature: 21/46 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (81) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/E8071C45EA15 b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/E8071C45EA15 new file mode 100644 index 000000000..60eb518f6 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/E8071C45EA15 @@ -0,0 +1,190 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT02B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:04:11 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x80) Offline data collection activity + was never started. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 39440 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1159 +177 Wear_Leveling_Count PO--C- 082 082 000 - 378 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 070 047 000 - 30 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 099 099 000 - 1 +235 POR_Recovery_Count -O--C- 099 099 000 - 125 +241 Total_LBAs_Written -O--CK 099 099 000 - 143697975829 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 39438 - +# 2 Short offline Completed without error 00% 39414 - +# 3 Short offline Completed without error 00% 39390 - +# 4 Short offline Completed without error 00% 39366 - +# 5 Short offline Completed without error 00% 39342 - +# 6 Extended offline Completed without error 00% 39323 - +# 7 Short offline Completed without error 00% 39318 - +# 8 Short offline Completed without error 00% 39294 - +# 9 Short offline Completed without error 00% 39270 - +#10 Short offline Completed without error 00% 39246 - +#11 Short offline Completed without error 00% 39222 - +#12 Short offline Completed without error 00% 39198 - +#13 Short offline Completed without error 00% 39174 - +#14 Extended offline Completed without error 00% 39156 - +#15 Short offline Completed without error 00% 39150 - +#16 Short offline Completed without error 00% 39126 - +#17 Short offline Completed without error 00% 39102 - +#18 Short offline Completed without error 00% 39078 - +#19 Short offline Completed without error 00% 39054 - + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 0 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 1 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 22/40 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294967295/4294901760 +SMART Status: 0xffff (Reserved) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (43) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 21 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/F551B82EE8CE b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/F551B82EE8CE new file mode 100644 index 000000000..5c3cc7b54 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/F551B82EE8CE @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT02B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 27 16:03:17 2020 NZST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 496 + 12 Power_Cycle_Count -O--CK 099 099 000 - 304 +177 Wear_Leveling_Count PO--C- 099 099 000 - 5 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 071 056 000 - 29 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 78 +241 Total_LBAs_Written -O--CK 099 099 000 - 2577266011 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: 26/26 Celsius +Lifetime Min/Max Temperature: 20/44 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (116) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/FACEAA9AA15A b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/FACEAA9AA15A new file mode 100644 index 000000000..a68741a8f --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 250GB/FACEAA9AA15A @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT03B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Aug 11 20:12:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 2590 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1693 +177 Wear_Leveling_Count PO--C- 099 099 000 - 5 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 064 052 000 - 36 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 130 +241 Total_LBAs_Written -O--CK 099 099 000 - 6406931205 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Aborted by host 20% 635 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 36/41 Celsius +Lifetime Min/Max Temperature: 23/47 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (90) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 51 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/2599AC16B848 b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/2599AC16B848 new file mode 100644 index 000000000..9fffe65bf --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/2599AC16B848 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT02B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 21 03:11:49 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 12981 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1473 +177 Wear_Leveling_Count PO--C- 097 097 000 - 49 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 069 043 000 - 31 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 91 +241 Total_LBAs_Written -O--CK 099 099 000 - 41310007636 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 28/33 Celsius +Lifetime Min/Max Temperature: 20/57 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (43) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/6460D1C29DE8 b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/6460D1C29DE8 new file mode 100644 index 000000000..7a6867c09 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/6460D1C29DE8 @@ -0,0 +1,99 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT03B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 18 21:48:55 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 9841 + 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 2430 +177 Wear_Leveling_Count 0x0013 096 096 000 Pre-fail Always - 66 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 061 040 000 Old_age Always - 39 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 326 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 32950873023 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Aborted by host 90% 3103 - +# 2 Short offline Aborted by host 50% 3103 - +# 3 Short offline Completed without error 00% 58 - +# 4 Short offline Aborted by host 60% 58 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/977CC4C4922C b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/977CC4C4922C new file mode 100644 index 000000000..e028a6f51 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/977CC4C4922C @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT03B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 11 17:59:06 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 12101 + 12 Power_Cycle_Count -O--CK 099 099 000 - 903 +177 Wear_Leveling_Count PO--C- 086 086 000 - 277 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 066 041 000 - 34 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 183 +241 Total_LBAs_Written -O--CK 099 099 000 - 216278829408 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 30/39 Celsius +Lifetime Min/Max Temperature: 21/58 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (100) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 23 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/B858CDA8B779 b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/B858CDA8B779 new file mode 100644 index 000000000..baf4dd2db --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/B858CDA8B779 @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT03B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 3 22:45:34 2020 +08 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 2921 + 12 Power_Cycle_Count -O--CK 092 092 000 - 7902 +177 Wear_Leveling_Count PO--C- 098 098 000 - 39 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 056 048 000 - 44 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 24 +241 Total_LBAs_Written -O--CK 099 099 000 - 34960353767 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2172 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: ? Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: 27/52 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (18) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/D3FFE757AFB6 b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/D3FFE757AFB6 new file mode 100644 index 000000000..a59ef620b --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/D3FFE757AFB6 @@ -0,0 +1,95 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT03B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 12:31:28 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 5714 + 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1746 +177 Wear_Leveling_Count 0x0013 096 096 000 Pre-fail Always - 66 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 070 047 000 Old_age Always - 30 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 79 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 60413546398 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/F555D3E3DD0B b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/F555D3E3DD0B new file mode 100644 index 000000000..9033364c0 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO 500GB/F555D3E3DD0B @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT02B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 8 14:53:48 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 23260 + 12 Power_Cycle_Count -O--CK 099 099 000 - 511 +177 Wear_Leveling_Count PO--C- 099 099 000 - 13 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 063 051 000 - 37 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 146 +241 Total_LBAs_Written -O--CK 099 099 000 - 24468923760 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Aborted by host 50% 133 - +# 2 Extended offline Interrupted (host reset) 90% 120 - +# 3 Extended offline Aborted by host 40% 111 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 29/44 Celsius +Lifetime Min/Max Temperature: 19/48 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (88) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO M.2 250GB/472089CE4DFE b/SSD/Samsung/SSD 850/SSD 850 EVO M.2 250GB/472089CE4DFE new file mode 100644 index 000000000..b4ddc8d9c --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO M.2 250GB/472089CE4DFE @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO M.2 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT21B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 24 01:48:29 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 2363 + 12 Power_Cycle_Count -O--CK 099 099 000 - 79 +177 Wear_Leveling_Count PO--C- 100 100 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 063 055 000 - 37 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 31 +241 Total_LBAs_Written -O--CK 099 099 000 - 528588812 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 31/42 Celsius +Lifetime Min/Max Temperature: 22/45 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (51) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO M.2 500GB/7D4147AF7706 b/SSD/Samsung/SSD 850/SSD 850 EVO M.2 500GB/7D4147AF7706 new file mode 100644 index 000000000..334e47ae0 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO M.2 500GB/7D4147AF7706 @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO M.2 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT21B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 07:19:26 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 094 094 000 - 27925 + 12 Power_Cycle_Count -O--CK 099 099 000 - 253 +177 Wear_Leveling_Count PO--C- 098 098 000 - 32 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 069 050 000 - 31 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 56 +241 Total_LBAs_Written -O--CK 099 099 000 - 39689716726 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 29/39 Celsius +Lifetime Min/Max Temperature: 21/50 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (55) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO M.2 500GB/C72976DE50C8 b/SSD/Samsung/SSD 850/SSD 850 EVO M.2 500GB/C72976DE50C8 new file mode 100644 index 000000000..76b3f4bb8 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO M.2 500GB/C72976DE50C8 @@ -0,0 +1,95 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO M.2 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT21B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 08:11:47 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 265) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 41113 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 63 +177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 14 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 052 036 000 Old_age Always - 48 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 45 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 13443205434 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO mSATA 250GB/24525A81E99A b/SSD/Samsung/SSD 850/SSD 850 EVO mSATA 250GB/24525A81E99A new file mode 100644 index 000000000..222e6ffbe --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO mSATA 250GB/24525A81E99A @@ -0,0 +1,95 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO mSATA 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT41B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Aug 3 15:46:41 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 23600 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 86 +177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 044 035 000 Old_age Always - 56 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 22 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 635079280 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 EVO mSATA 250GB/3973CE849972 b/SSD/Samsung/SSD 850/SSD 850 EVO mSATA 250GB/3973CE849972 new file mode 100644 index 000000000..f6451daa3 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 EVO mSATA 250GB/3973CE849972 @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 EVO mSATA 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EMT41B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Oct 28 14:04:47 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 133) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 092 092 000 - 38412 + 12 Power_Cycle_Count -O--CK 099 099 000 - 64 +177 Wear_Leveling_Count PO--C- 099 099 000 - 1 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 055 039 000 - 45 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 14 +241 Total_LBAs_Written -O--CK 099 099 000 - 4509896483 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: SCT command executing in background (5) +Current Temperature: 45 Celsius +Power Cycle Min/Max Temperature: 36/54 Celsius +Lifetime Min/Max Temperature: 0/70 Celsius +Under/Over Temperature Limit Count: 4294901760/0 +SMART Status: 0xffff (Reserved) + +SCT Temperature History Version: 3 (Unknown, should be 2) +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (89) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 8 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 850/SSD 850 PRO 128GB/DCA5DF50039B b/SSD/Samsung/SSD 850/SSD 850 PRO 128GB/DCA5DF50039B new file mode 100644 index 000000000..26f70f5d3 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 PRO 128GB/DCA5DF50039B @@ -0,0 +1,186 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 PRO 128GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXM02B6Q +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 5 19:49:12 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 68) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 20509 + 12 Power_Cycle_Count -O--CK 099 099 000 - 468 +177 Wear_Leveling_Count PO--C- 096 096 000 - 182 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 056 049 000 - 44 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 30 +241 Total_LBAs_Written -O--CK 099 099 000 - 42785351954 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xa5 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log +0xde SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 20491 - +# 2 Short offline Completed without error 00% 20455 - +# 3 Short offline Completed without error 00% 20403 - +# 4 Short offline Completed without error 00% 20379 - +# 5 Short offline Completed without error 00% 20355 - +# 6 Short offline Completed without error 00% 20331 - +# 7 Short offline Completed without error 00% 20307 - +# 8 Extended offline Completed without error 00% 20284 - +# 9 Short offline Completed without error 00% 20283 - +#10 Short offline Completed without error 00% 20259 - +#11 Short offline Completed without error 00% 20236 - +#12 Extended offline Completed without error 00% 20195 - +#13 Short offline Completed without error 00% 20194 - +#14 Short offline Completed without error 00% 20154 - +#15 Short offline Completed without error 00% 20130 - +#16 Short offline Completed without error 00% 20095 - +#17 Extended offline Completed without error 00% 20072 - +#18 Short offline Completed without error 00% 20071 - +#19 Short offline Completed without error 00% 20047 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 44 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/115740 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (22) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 850/SSD 850 PRO 128GB/DD04DD677256 b/SSD/Samsung/SSD 850/SSD 850 PRO 128GB/DD04DD677256 new file mode 100644 index 000000000..bf364a4c9 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 PRO 128GB/DD04DD677256 @@ -0,0 +1,91 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 PRO 128GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXM01B6Q +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 13:59:04 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 65824 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 917 +177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 41 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 069 057 000 Old_age Always - 31 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 74 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 10595632239 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/8809895F230A b/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/8809895F230A new file mode 100644 index 000000000..cd53cd706 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/8809895F230A @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 PRO 256GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXM04B6Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 11:10:10 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 136) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 095 095 000 - 20629 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1903 +177 Wear_Leveling_Count PO--C- 092 092 000 - 457 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 075 057 000 - 25 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 83 +241 Total_LBAs_Written -O--CK 099 099 000 - 37124680338 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xa5 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log +0xde SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 25 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/115879 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (22) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/8CAB679EA8F9 b/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/8CAB679EA8F9 new file mode 100644 index 000000000..38e6b40e4 --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/8CAB679EA8F9 @@ -0,0 +1,91 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 PRO 256GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXM02B6Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 01:24:46 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 136) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3267 + 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1097 +177 Wear_Leveling_Count 0x0013 098 098 000 Pre-fail Always - 61 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 064 031 000 Old_age Always - 36 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 64 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 16833526637 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/AA6A09CEE6FA b/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/AA6A09CEE6FA new file mode 100644 index 000000000..1895c15dd --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/AA6A09CEE6FA @@ -0,0 +1,169 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT-363681 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 PRO 256GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXM02B6Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:40:59 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 136) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 12225 + 12 Power_Cycle_Count -O--CK 099 099 000 - 985 +177 Wear_Leveling_Count PO--C- 098 098 000 - 76 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 064 058 000 - 36 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 15 +241 Total_LBAs_Written -O--CK 099 099 000 - 16542067163 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xa5 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log +0xde SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/65721 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (28) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 17 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/F1C330086F56 b/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/F1C330086F56 new file mode 100644 index 000000000..54eda564f --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 PRO 256GB/F1C330086F56 @@ -0,0 +1,186 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 PRO 256GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXM01B6Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 1 10:54:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 17) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 094 094 000 - 25692 + 12 Power_Cycle_Count -O--CK 099 099 000 - 682 +177 Wear_Leveling_Count PO--C- 099 099 000 - 28 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 063 051 000 - 37 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 180 +241 Total_LBAs_Written -O--CK 099 099 000 - 14027691972 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xa5 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 15 - +# 2 Short offline Completed without error 00% 79 - +# 3 Extended offline Completed without error 00% 57 - +# 4 Short offline Completed without error 00% 55 - +# 5 Short offline Completed without error 00% 31 - +# 6 Short offline Completed without error 00% 7 - +# 7 Short offline Completed without error 00% 36 - +# 8 Short offline Completed without error 00% 12 - +# 9 Short offline Completed without error 00% 254 - +#10 Short offline Completed without error 00% 230 - +#11 Extended offline Completed without error 00% 207 - +#12 Short offline Completed without error 00% 206 - +#13 Short offline Completed without error 00% 182 - +#14 Short offline Completed without error 00% 158 - +#15 Short offline Completed without error 00% 134 - +#16 Short offline Completed without error 00% 110 - +#17 Short offline Completed without error 00% 86 - +#18 Short offline Completed without error 00% 62 - +#19 Extended offline Completed without error 00% 39 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/139623 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (2) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 850/SSD 850 PRO 512GB/D1E0E8DBCF5A b/SSD/Samsung/SSD 850/SSD 850 PRO 512GB/D1E0E8DBCF5A new file mode 100644 index 000000000..e4f3a147c --- /dev/null +++ b/SSD/Samsung/SSD 850/SSD 850 PRO 512GB/D1E0E8DBCF5A @@ -0,0 +1,93 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 850 PRO 512GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXM02B6Q +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 22 11:28:57 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 272) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 7353 + 12 Power_Cycle_Count 0x0032 094 094 000 Old_age Always - 5278 +177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 45 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 074 052 000 Old_age Always - 26 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 099 099 000 Old_age Always - 51 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 221 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 28920705840 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/48F257F953F5 b/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/48F257F953F5 new file mode 100644 index 000000000..e8dc16d41 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/48F257F953F5 @@ -0,0 +1,197 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT02B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 8 14:53:48 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 12022 + 12 Power_Cycle_Count -O--CK 099 099 000 - 167 +177 Wear_Leveling_Count PO--C- 099 099 000 - 4 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 066 048 000 - 34 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 65 +241 Total_LBAs_Written -O--CK 099 099 000 - 5505159493 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 27/40 Celsius +Lifetime Min/Max Temperature: 23/52 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (28) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 167 --- Lifetime Power-On Resets +0x01 0x010 4 12022 --- Power-on Hours +0x01 0x018 6 5505159493 --- Logical Sectors Written +0x01 0x020 6 15432580 --- Number of Write Commands +0x01 0x028 6 881210233 --- Logical Sectors Read +0x01 0x030 6 5706854 --- Number of Read Commands +0x01 0x038 6 994000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 67 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1414 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/7181F7BD09D9 b/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/7181F7BD09D9 new file mode 100644 index 000000000..f27918847 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/7181F7BD09D9 @@ -0,0 +1,198 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT04B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 11:10:10 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 2122 + 12 Power_Cycle_Count -O--CK 099 099 000 - 224 +177 Wear_Leveling_Count PO--C- 099 099 000 - 5 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 077 059 000 - 23 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 12 +241 Total_LBAs_Written -O--CK 099 099 000 - 7309734872 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 23 Celsius +Power Cycle Min/Max Temperature: 21/26 Celsius +Lifetime Min/Max Temperature: 21/41 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (86) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 224 --- Lifetime Power-On Resets +0x01 0x010 4 2122 --- Power-on Hours +0x01 0x018 6 7309734872 --- Logical Sectors Written +0x01 0x020 6 45109554 --- Number of Write Commands +0x01 0x028 6 6023825412 --- Logical Sectors Read +0x01 0x030 6 78853778 --- Number of Read Commands +0x01 0x038 6 2791000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 23 --- Current Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1128 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/907BCFB41309 b/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/907BCFB41309 new file mode 100644 index 000000000..214396d32 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/907BCFB41309 @@ -0,0 +1,210 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT02B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 4 23:09:47 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 46 + 12 Power_Cycle_Count -O--CK 099 099 000 - 65 +177 Wear_Leveling_Count PO--C- 100 100 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 063 050 000 - 37 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 28 +241 Total_LBAs_Written -O--CK 099 099 000 - 189081358 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 41 - +# 2 Short offline Completed without error 00% 39 - +# 3 Extended offline Aborted by host 20% 38 - +# 4 Short offline Completed without error 00% 35 - +# 5 Short offline Completed without error 00% 33 - +# 6 Short offline Completed without error 00% 30 - +# 7 Short offline Completed without error 00% 28 - +# 8 Short offline Completed without error 00% 26 - +# 9 Short offline Completed without error 00% 24 - +#10 Short offline Completed without error 00% 21 - +#11 Short offline Completed without error 00% 18 - +#12 Offline Completed without error 00% 14 - +#13 Short offline Completed without error 00% 12 - +#14 Short offline Completed without error 00% 6 - +#15 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 36/50 Celsius +Lifetime Min/Max Temperature: 24/50 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (83) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 65 --- Lifetime Power-On Resets +0x01 0x010 4 46 --- Power-on Hours +0x01 0x018 6 189081358 --- Logical Sectors Written +0x01 0x020 6 1694929 --- Number of Write Commands +0x01 0x028 6 139606252 --- Logical Sectors Read +0x01 0x030 6 2591088 --- Number of Read Commands +0x01 0x038 6 3371000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 314 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 16 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 13 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/966C7B19A935 b/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/966C7B19A935 new file mode 100644 index 000000000..015c246d5 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 1TB/966C7B19A935 @@ -0,0 +1,182 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT02B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Sep 28 21:51:38 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Read SCT Status failed: Input/output error +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 096 096 000 - 15273 + 12 Power_Cycle_Count -O--CK 099 099 000 - 55 +177 Wear_Leveling_Count PO--C- 098 098 000 - 23 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 061 054 000 - 39 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 15 +241 Total_LBAs_Written -O--CK 099 099 000 - 46097766671 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +Read SCT Status failed: Input/output error + +Read SCT Status failed: Input/output error +SCT (Get) Error Recovery Control command failed + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 55 --- Lifetime Power-On Resets +0x01 0x010 4 15273 --- Power-on Hours +0x01 0x018 6 46097766671 --- Logical Sectors Written +0x01 0x020 6 1357040848 --- Number of Write Commands +0x01 0x028 6 43402170324 --- Logical Sectors Read +0x01 0x030 6 1780144211 --- Number of Read Commands +0x01 0x038 6 2609000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 277 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/6C43091A2FAE b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/6C43091A2FAE new file mode 100644 index 000000000..b0ad0de70 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/6C43091A2FAE @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT arm64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT01B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 15 09:01:50 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 097 097 000 - 14680 + 12 Power_Cycle_Count -O--CK 099 099 000 - 28 +177 Wear_Leveling_Count PO--C- 097 097 000 - 39 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 067 050 000 - 33 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 24 +241 Total_LBAs_Written -O--CK 099 099 000 - 10882410754 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 33 Celsius +Power Cycle Min/Max Temperature: 30/49 Celsius +Lifetime Min/Max Temperature: 22/63 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (62) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 28 --- Lifetime Power-On Resets +0x01 0x010 4 14680 --- Power-on Hours +0x01 0x018 6 10882410754 --- Logical Sectors Written +0x01 0x020 6 331516278 --- Number of Write Commands +0x01 0x028 6 1781583351 --- Logical Sectors Read +0x01 0x030 6 66398667 --- Number of Read Commands +0x01 0x038 6 2327000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x020 1 63 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3214 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 47 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 47 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/7D88E8129431 b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/7D88E8129431 new file mode 100644 index 000000000..7e7d38e35 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/7D88E8129431 @@ -0,0 +1,95 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT03B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 12:32:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1016 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 571 +177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 5 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 069 053 000 Old_age Always - 31 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 19 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 3674630890 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/BAC2E2AE64CB b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/BAC2E2AE64CB new file mode 100644 index 000000000..b1f5330b8 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/BAC2E2AE64CB @@ -0,0 +1,198 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT04B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:39:48 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 595 + 12 Power_Cycle_Count -O--CK 099 099 000 - 12 +177 Wear_Leveling_Count PO--C- 099 099 000 - 3 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 051 027 000 - 49 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 5 +241 Total_LBAs_Written -O--CK 099 099 000 - 1368959609 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 49 Celsius +Power Cycle Min/Max Temperature: 40/54 Celsius +Lifetime Min/Max Temperature: 29/73 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (14) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 595 --- Power-on Hours +0x01 0x018 6 1368959609 --- Logical Sectors Written +0x01 0x020 6 31675998 --- Number of Write Commands +0x01 0x028 6 510336542 --- Logical Sectors Read +0x01 0x030 6 20762512 --- Number of Read Commands +0x01 0x038 6 3521000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 49 --- Current Temperature +0x05 0x020 1 73 --- Highest Temperature +0x05 0x028 1 29 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 29 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 24 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/BB75FBD18E8A b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/BB75FBD18E8A new file mode 100644 index 000000000..29c3149ec --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/BB75FBD18E8A @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT02B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 09:42:50 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 098 098 000 - 5780 + 12 Power_Cycle_Count -O--CK 099 099 000 - 473 +177 Wear_Leveling_Count PO--C- 098 098 000 - 23 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 066 050 000 - 34 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 86 +241 Total_LBAs_Written -O--CK 099 099 000 - 14622213174 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 32/40 Celsius +Lifetime Min/Max Temperature: 20/50 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (18) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 473 --- Lifetime Power-On Resets +0x01 0x010 4 5780 --- Power-on Hours +0x01 0x018 6 14622213174 --- Logical Sectors Written +0x01 0x020 6 445231381 --- Number of Write Commands +0x01 0x028 6 3635055531 --- Logical Sectors Read +0x01 0x030 6 82549053 --- Number of Read Commands +0x01 0x038 6 151000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 514 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1995 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 98 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 11 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/C019EF95EB5F b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/C019EF95EB5F new file mode 100644 index 000000000..26f77153b --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/C019EF95EB5F @@ -0,0 +1,196 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT04B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 3 01:32:01 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 50 + 12 Power_Cycle_Count -O--CK 099 099 000 - 46 +177 Wear_Leveling_Count PO--C- 099 099 000 - 1 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 068 052 000 - 32 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 4 +241 Total_LBAs_Written -O--CK 099 099 000 - 414766044 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 32 Celsius +Power Cycle Min/Max Temperature: 30/40 Celsius +Lifetime Min/Max Temperature: 27/48 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (91) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 46 --- Lifetime Power-On Resets +0x01 0x010 4 50 --- Power-on Hours +0x01 0x018 6 414766044 --- Logical Sectors Written +0x01 0x020 6 8402528 --- Number of Write Commands +0x01 0x028 6 114870187 --- Logical Sectors Read +0x01 0x030 6 2293310 --- Number of Read Commands +0x01 0x038 6 2062000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 394 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/C1D3EE61BD1F b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/C1D3EE61BD1F new file mode 100644 index 000000000..30a7847fa --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/C1D3EE61BD1F @@ -0,0 +1,198 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT04B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Aug 22 01:04:25 2020 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 133 + 12 Power_Cycle_Count -O--CK 099 099 000 - 21 +177 Wear_Leveling_Count PO--C- 100 100 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 073 065 000 - 27 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 5 +241 Total_LBAs_Written -O--CK 099 099 000 - 399249475 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 25/40 Celsius +Lifetime Min/Max Temperature: 24/40 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (59) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 21 --- Lifetime Power-On Resets +0x01 0x010 4 133 --- Power-on Hours +0x01 0x018 6 399249475 --- Logical Sectors Written +0x01 0x020 6 7929318 --- Number of Write Commands +0x01 0x028 6 69490209 --- Logical Sectors Read +0x01 0x030 6 1496978 --- Number of Read Commands +0x01 0x038 6 588000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x020 1 40 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 335 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/CB4B8BB46053 b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/CB4B8BB46053 new file mode 100644 index 000000000..61472362b --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 250GB/CB4B8BB46053 @@ -0,0 +1,197 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT arm64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 250GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT01B6Q +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Sep 15 08:57:22 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 1856 + 12 Power_Cycle_Count -O--CK 099 099 000 - 47 +177 Wear_Leveling_Count PO--C- 099 099 000 - 5 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 069 057 000 - 31 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 096 096 000 - 3689 +235 POR_Recovery_Count -O--C- 099 099 000 - 32 +241 Total_LBAs_Written -O--CK 099 099 000 - 2257762665 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 29/42 Celsius +Lifetime Min/Max Temperature: 26/60 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (58) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 47 --- Lifetime Power-On Resets +0x01 0x010 4 1856 --- Power-on Hours +0x01 0x018 6 2257762665 --- Logical Sectors Written +0x01 0x020 6 50596045 --- Number of Write Commands +0x01 0x028 6 612677694 --- Logical Sectors Read +0x01 0x030 6 16576730 --- Number of Read Commands +0x01 0x038 6 805000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 12 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x020 1 60 --- Highest Temperature +0x05 0x028 1 26 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5774 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 3689 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 3470 Command failed due to ICRC error +0x0002 2 3470 R_ERR response for data FIS +0x0003 2 3470 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 20 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 20 R_ERR response for host-to-device non-data FIS +0x0008 2 76 Device-to-host non-data FIS retries +0x0009 2 3558 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3558 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 2TB/9A755AFDAB81 b/SSD/Samsung/SSD 860/SSD 860 EVO 2TB/9A755AFDAB81 new file mode 100644 index 000000000..ede440270 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 2TB/9A755AFDAB81 @@ -0,0 +1,94 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 2TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT01B6Q +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 12:38:34 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 160) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 16183 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 498 +177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 14 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 064 045 000 Old_age Always - 36 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 118 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 50321012139 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 2TB/A964BB9D67B6 b/SSD/Samsung/SSD 860/SSD 860 EVO 2TB/A964BB9D67B6 new file mode 100644 index 000000000..a70b7b2cb --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 2TB/A964BB9D67B6 @@ -0,0 +1,94 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 2TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT01B6Q +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 21:50:20 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 160) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 18250 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 28 +177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 1 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 067 055 000 Old_age Always - 33 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 11 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 11178398441 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/061F4A4223CD b/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/061F4A4223CD new file mode 100644 index 000000000..14898d902 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/061F4A4223CD @@ -0,0 +1,198 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT02B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 30 13:36:29 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 1136 + 12 Power_Cycle_Count -O--CK 099 099 000 - 244 +177 Wear_Leveling_Count PO--C- 099 099 000 - 2 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 073 055 000 - 27 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 63 +241 Total_LBAs_Written -O--CK 099 099 000 - 1220128232 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Offline Completed without error 00% 1125 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 26/40 Celsius +Lifetime Min/Max Temperature: 19/45 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (79) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 244 --- Lifetime Power-On Resets +0x01 0x010 4 1136 --- Power-on Hours +0x01 0x018 6 1220128232 --- Logical Sectors Written +0x01 0x020 6 6002718 --- Number of Write Commands +0x01 0x028 6 1130149008 --- Logical Sectors Read +0x01 0x030 6 9063088 --- Number of Read Commands +0x01 0x038 6 2982000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1032 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 14 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/4F929D79666B b/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/4F929D79666B new file mode 100644 index 000000000..3470e42dc --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/4F929D79666B @@ -0,0 +1,196 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT04B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 11 17:59:06 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 1123 + 12 Power_Cycle_Count -O--CK 099 099 000 - 102 +177 Wear_Leveling_Count PO--C- 099 099 000 - 4 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 072 053 000 - 28 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 30 +241 Total_LBAs_Written -O--CK 099 099 000 - 3230278064 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 28 Celsius +Power Cycle Min/Max Temperature: 25/31 Celsius +Lifetime Min/Max Temperature: 25/47 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (111) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 102 --- Lifetime Power-On Resets +0x01 0x010 4 1123 --- Power-on Hours +0x01 0x018 6 3230278064 --- Logical Sectors Written +0x01 0x020 6 17295349 --- Number of Write Commands +0x01 0x028 6 5576393640 --- Logical Sectors Read +0x01 0x030 6 27516922 --- Number of Read Commands +0x01 0x038 6 2933000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 28 --- Current Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 289 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 23 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/C575EF977144 b/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/C575EF977144 new file mode 100644 index 000000000..0e25541a5 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/C575EF977144 @@ -0,0 +1,196 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT04B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Jul 3 00:38:32 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 73 + 12 Power_Cycle_Count -O--CK 099 099 000 - 94 +177 Wear_Leveling_Count PO--C- 099 099 000 - 1 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 061 050 000 - 39 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 13 +241 Total_LBAs_Written -O--CK 099 099 000 - 775148220 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 39 Celsius +Power Cycle Min/Max Temperature: 29/47 Celsius +Lifetime Min/Max Temperature: 27/50 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (21) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 94 --- Lifetime Power-On Resets +0x01 0x010 4 73 --- Power-on Hours +0x01 0x018 6 775148220 --- Logical Sectors Written +0x01 0x020 6 10773567 --- Number of Write Commands +0x01 0x028 6 325349649 --- Logical Sectors Read +0x01 0x030 6 7745294 --- Number of Read Commands +0x01 0x038 6 1355000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 728 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/CEDE12893682 b/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/CEDE12893682 new file mode 100644 index 000000000..a0a7c2279 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/CEDE12893682 @@ -0,0 +1,196 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT04B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Sun Nov 1 17:44:02 2020 GMT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 82 + 12 Power_Cycle_Count -O--CK 099 099 000 - 52 +177 Wear_Leveling_Count PO--C- 100 100 000 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 069 056 000 - 31 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 1 +241 Total_LBAs_Written -O--CK 099 099 000 - 83218105 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 31 Celsius +Power Cycle Min/Max Temperature: 24/40 Celsius +Lifetime Min/Max Temperature: 23/63 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (74) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 52 --- Lifetime Power-On Resets +0x01 0x010 4 82 --- Power-on Hours +0x01 0x018 6 83218105 --- Logical Sectors Written +0x01 0x020 6 1007635 --- Number of Write Commands +0x01 0x028 6 80396647 --- Logical Sectors Read +0x01 0x030 6 1597007 --- Number of Read Commands +0x01 0x038 6 1527000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x020 1 63 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 139 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/E894D8939CA8 b/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/E894D8939CA8 new file mode 100644 index 000000000..d4c66252d --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO 500GB/E894D8939CA8 @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT01B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 06:45:42 2020 NZDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 096 096 000 - 18884 + 12 Power_Cycle_Count -O--CK 099 099 000 - 317 +177 Wear_Leveling_Count PO--C- 098 098 000 - 18 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 073 051 000 - 27 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 225 +241 Total_LBAs_Written -O--CK 099 099 000 - 15984065429 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 27 Celsius +Power Cycle Min/Max Temperature: 23/40 Celsius +Lifetime Min/Max Temperature: 15/49 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (61) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 317 --- Lifetime Power-On Resets +0x01 0x010 4 18884 --- Power-on Hours +0x01 0x018 6 15984065429 --- Logical Sectors Written +0x01 0x020 6 271583826 --- Number of Write Commands +0x01 0x028 6 6985540476 --- Logical Sectors Read +0x01 0x030 6 96206314 --- Number of Read Commands +0x01 0x038 6 2000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 73 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 27 --- Current Temperature +0x05 0x020 1 49 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 2742 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 23 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 23 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO M.2 1TB/2FDE46282F3B b/SSD/Samsung/SSD 860/SSD 860 EVO M.2 1TB/2FDE46282F3B new file mode 100644 index 000000000..7e99c7b9b --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO M.2 1TB/2FDE46282F3B @@ -0,0 +1,95 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO M.2 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT24B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 22:00:36 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 321 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 171 +177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 069 051 000 Old_age Always - 31 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 5 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 438910635 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO M.2 2TB/8A0229FE339C b/SSD/Samsung/SSD 860/SSD 860 EVO M.2 2TB/8A0229FE339C new file mode 100644 index 000000000..d60faa262 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO M.2 2TB/8A0229FE339C @@ -0,0 +1,93 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO M.2 2TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT23B6Q +User Capacity: 2,000,398,934,016 bytes [2.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 21:50:20 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 160) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 5828 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 5 +177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 064 043 000 Old_age Always - 36 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 2 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 2711587026 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 1TB/83B18AA5D07A b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 1TB/83B18AA5D07A new file mode 100644 index 000000000..be6aba296 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 1TB/83B18AA5D07A @@ -0,0 +1,197 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO mSATA 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT42B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 12:29:47 2020 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 098 098 000 - 8318 + 12 Power_Cycle_Count -O--CK 099 099 000 - 25 +177 Wear_Leveling_Count PO--C- 099 099 000 - 1 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 045 028 000 - 55 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 20 +241 Total_LBAs_Written -O--CK 099 099 000 - 7596212368 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 55 Celsius +Power Cycle Min/Max Temperature: 40/72 Celsius +Lifetime Min/Max Temperature: 39/72 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/1 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (25) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 25 --- Lifetime Power-On Resets +0x01 0x010 4 8318 --- Power-on Hours +0x01 0x018 6 7596212368 --- Logical Sectors Written +0x01 0x020 6 308493355 --- Number of Write Commands +0x01 0x028 6 6944657716 --- Logical Sectors Read +0x01 0x030 6 268621299 --- Number of Read Commands +0x01 0x038 6 3174000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 55 --- Current Temperature +0x05 0x020 1 72 --- Highest Temperature +0x05 0x028 1 39 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 162 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/2C54922C3A6C b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/2C54922C3A6C new file mode 100644 index 000000000..658b2f2a2 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/2C54922C3A6C @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO mSATA 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT42B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Nov 2 17:19:53 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 2405 + 12 Power_Cycle_Count -O--CK 096 096 000 - 3669 +177 Wear_Leveling_Count PO--C- 099 099 000 - 4 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 060 037 000 - 40 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 18 +241 Total_LBAs_Written -O--CK 099 099 000 - 4662341037 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 40 Celsius +Power Cycle Min/Max Temperature: 31/41 Celsius +Lifetime Min/Max Temperature: 23/67 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (123) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 3669 --- Lifetime Power-On Resets +0x01 0x010 4 2405 --- Power-on Hours +0x01 0x018 6 4662341037 --- Logical Sectors Written +0x01 0x020 6 68548374 --- Number of Write Commands +0x01 0x028 6 1921311591 --- Logical Sectors Read +0x01 0x030 6 17326778 --- Number of Read Commands +0x01 0x038 6 2671000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 160 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x020 1 67 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 26912 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 64 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 53 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/6A3DCD20B851 b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/6A3DCD20B851 new file mode 100644 index 000000000..ee3682225 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/6A3DCD20B851 @@ -0,0 +1,94 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO mSATA 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT42B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 12:37:22 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 10895 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 10 +177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 13 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 055 032 000 Old_age Always - 45 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 6 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 14266683540 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/C3B13AEA4B16 b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/C3B13AEA4B16 new file mode 100644 index 000000000..df0e35573 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/C3B13AEA4B16 @@ -0,0 +1,92 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO mSATA 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT41B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 15:58:52 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3811 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 27 +177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 059 046 000 Old_age Always - 41 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 4 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 234297322 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/C6E458C8625C b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/C6E458C8625C new file mode 100644 index 000000000..d9e7852b2 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/C6E458C8625C @@ -0,0 +1,92 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO mSATA 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT41B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 15:59:10 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3812 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 31 +177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 053 041 000 Old_age Always - 47 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 4 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 418617126 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/F2E93C9581CD b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/F2E93C9581CD new file mode 100644 index 000000000..f1612f30c --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 EVO mSATA 500GB/F2E93C9581CD @@ -0,0 +1,92 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 EVO mSATA 500GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVT41B6Q +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 15:58:37 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 + 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3809 + 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 19 +177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 +179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 +183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 +187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 +190 Airflow_Temperature_Cel 0x0032 054 041 000 Old_age Always - 46 +195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 +199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 +235 POR_Recovery_Count 0x0012 100 100 000 Old_age Always - 0 +241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 408034162 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Samsung/SSD 860/SSD 860 PRO 256GB/B9571B379337 b/SSD/Samsung/SSD 860/SSD 860 PRO 256GB/B9571B379337 new file mode 100644 index 000000000..ef20df168 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 PRO 256GB/B9571B379337 @@ -0,0 +1,197 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: Samsung SSD 860 PRO 256GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVM02B6Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jul 18 01:07:18 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 098 098 000 - 6700 + 12 Power_Cycle_Count -O--CK 099 099 000 - 344 +177 Wear_Leveling_Count PO--C- 098 098 000 - 26 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 070 056 000 - 30 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +199 CRC_Error_Count -OSRCK 100 100 000 - 0 +235 POR_Recovery_Count -O--C- 099 099 000 - 157 +241 Total_LBAs_Written -O--CK 099 099 000 - 7317808317 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 29/40 Celsius +Lifetime Min/Max Temperature: 14/44 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (11) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 344 --- Lifetime Power-On Resets +0x01 0x010 4 6700 --- Power-on Hours +0x01 0x018 6 7317808317 --- Logical Sectors Written +0x01 0x020 6 138773138 --- Number of Write Commands +0x01 0x028 6 21660148674 --- Logical Sectors Read +0x01 0x030 6 169016339 --- Number of Read Commands +0x01 0x038 6 362000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 14 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1394 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 QVO 1TB/6E443A961811 b/SSD/Samsung/SSD 860/SSD 860 QVO 1TB/6E443A961811 new file mode 100644 index 000000000..56933a2fa --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 QVO 1TB/6E443A961811 @@ -0,0 +1,181 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Samsung SSD 860 QVO 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVQ02B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 23:20:34 2020 EET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 3778 + 12 Power_Cycle_Count -O--CK 099 099 000 - 4 +177 Wear_Leveling_Count PO--C- 099 099 000 - 1 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 063 055 000 - 37 +195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +235 Unknown_Attribute -O--C- 099 099 000 - 1 +241 Total_LBAs_Written -O--CK 099 099 000 - 4625800705 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 37 Celsius +Power Cycle Min/Max Temperature: 27/45 Celsius +Lifetime Min/Max Temperature: 27/45 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (26) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 4 --- Lifetime Power-On Resets +0x01 0x010 4 3778 --- Power-on Hours +0x01 0x018 6 4625800705 --- Logical Sectors Written +0x01 0x020 6 121790522 --- Number of Write Commands +0x01 0x028 6 36115888512 --- Logical Sectors Read +0x01 0x030 6 296747309 --- Number of Read Commands +0x01 0x038 6 357000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 55 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description + + + diff --git a/SSD/Samsung/SSD 860/SSD 860 QVO 1TB/C31C0D0C41FB b/SSD/Samsung/SSD 860/SSD 860 QVO 1TB/C31C0D0C41FB new file mode 100644 index 000000000..ccaf68721 --- /dev/null +++ b/SSD/Samsung/SSD 860/SSD 860 QVO 1TB/C31C0D0C41FB @@ -0,0 +1,182 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Samsung SSD 860 QVO 1TB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: RVQ01B6Q +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 4 17:35:10 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 752 + 12 Power_Cycle_Count -O--CK 099 099 000 - 453 +177 Wear_Leveling_Count PO--C- 099 099 000 - 2 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +190 Airflow_Temperature_Cel -O--CK 070 054 000 - 30 +195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +235 Unknown_Attribute -O--C- 099 099 000 - 3 +241 Total_LBAs_Written -O--CK 099 099 000 - 3806867836 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 SL VS 16 Device vendor specific log +0xa5 SL VS 16 Device vendor specific log +0xce-0xcf SL VS 16 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 379 - +# 2 Short offline Completed without error 00% 210 - +# 3 Short offline Completed without error 00% 104 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 256 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: 23/29 Celsius +Lifetime Min/Max Temperature: 24/46 Celsius +Specified Max Operating Temperature: 70 Celsius +Under/Over Temperature Limit Count: 0/0 +SMART Status: 0xc24f (PASSED) + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (101) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 453 --- Lifetime Power-On Resets +0x01 0x010 4 752 --- Power-on Hours +0x01 0x018 6 3806867836 --- Logical Sectors Written +0x01 0x020 6 49040197 --- Number of Write Commands +0x01 0x028 6 5891637841 --- Logical Sectors Read +0x01 0x030 6 48091097 --- Number of Read Commands +0x01 0x038 6 2458000 --- Date and Time TimeStamp +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 3309 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description + diff --git a/SSD/Samsung/SSD PB22/SSD PB22-JS3 TM 64GB/89A98B1FAE33 b/SSD/Samsung/SSD PB22/SSD PB22-JS3 TM 64GB/89A98B1FAE33 new file mode 100644 index 000000000..e999d30ec --- /dev/null +++ b/SSD/Samsung/SSD PB22/SSD PB22-JS3 TM 64GB/89A98B1FAE33 @@ -0,0 +1,145 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SAMSUNG SSD PB22-JS3 TM 64GB +Serial Number: -- +LU WWN Device Id: 5 0000f0 ... +Firmware Version: VBM19D1Q +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Thu Oct 29 17:48:29 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 240) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 4) minutes. +Extended self-test routine +recommended polling time: ( 16) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 091 091 000 - 43233 + 12 Power_Cycle_Count -O--CK 098 098 000 - 1562 +175 Program_Fail_Count_Chip -O--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--C- 057 057 017 - 2567 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 090 090 010 - 6 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 098 098 010 - 25 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 098 098 010 - 1895 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 253 253 000 - 0 +232 Available_Reservd_Space PO--C- 090 090 010 - 54 +233 Media_Wearout_Indicator -O--CK 083 083 000 - 696374949 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 0 +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 1 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4399 - +# 2 Short offline Completed without error 00% 1 - +# 3 Short offline Completed without error 00% 0 - +# 4 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Samsung/SSD PM830/SSD PM830 mSATA 128GB/7246C2813CF1 b/SSD/Samsung/SSD PM830/SSD PM830 mSATA 128GB/7246C2813CF1 new file mode 100644 index 000000000..03c46d857 --- /dev/null +++ b/SSD/Samsung/SSD PM830/SSD PM830 mSATA 128GB/7246C2813CF1 @@ -0,0 +1,155 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG SSD PM830 mSATA 128GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: CXM13D1Q +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 11:45:28 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 540) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 9) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 098 098 000 - 9243 + 12 Power_Cycle_Count -O--CK 097 097 000 - 2810 +175 Program_Fail_Count_Chip -O--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--C- 092 092 010 - 288 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 073 073 010 - 438 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 085 085 010 - 494 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 085 085 010 - 2770 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 CRC_Error_Count -OSRCK 253 253 000 - 0 +232 Available_Reservd_Space PO--C- 073 073 000 - 1194 +241 Total_LBAs_Written -O--CK 099 099 000 - 14287320705 +242 Total_LBAs_Read -O--CK 099 099 000 - 13310589502 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 2 Comprehensive SMART error log +0x03 GPL,SL R/O 2 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 2 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (2 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 586 - +# 2 Short offline Completed without error 00% 554 - +# 3 Short offline Completed without error 00% 433 - +# 4 Short offline Completed without error 00% 83 - +# 5 Short offline Completed without error 00% 82 - +# 6 Short offline Completed without error 00% 34 - +# 7 Short offline Completed without error 00% 33 - +# 8 Short offline Completed without error 00% 32 - +# 9 Short offline Completed without error 00% 31 - +#10 Short offline Completed without error 00% 15 - +#11 Short offline Completed without error 00% 15 - +#12 Short offline Completed without error 00% 6 - +#13 Short offline Completed without error 00% 2 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 49152 R_ERR response for data FIS +0x0003 2 53248 R_ERR response for device-to-host data FIS +0x0004 2 57344 R_ERR response for host-to-device data FIS +0x0005 2 7952 R_ERR response for non-data FIS +0x0006 2 2562 R_ERR response for device-to-host non-data FIS +0x0007 2 4096 R_ERR response for host-to-device non-data FIS +0x0008 2 7952 Device-to-host non-data FIS retries +0x0009 2 7953 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 17536 Device-to-host register FISes sent due to a COMRESET +0x000b 2 6145 CRC errors within host-to-device FIS +0x000d 2 7953 Non-CRC errors within host-to-device FIS +0x000f 2 8176 R_ERR response for host-to-device data FIS, CRC +0x0010 2 15 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 49153 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 12112 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD PM851/SSD PM851 mSATA 256GB/DEF2EC4353BB b/SSD/Samsung/SSD PM851/SSD PM851 mSATA 256GB/DEF2EC4353BB new file mode 100644 index 000000000..8cb75ad22 --- /dev/null +++ b/SSD/Samsung/SSD PM851/SSD PM851 mSATA 256GB/DEF2EC4353BB @@ -0,0 +1,164 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Samsung based SSDs +Device Model: SAMSUNG SSD PM851 mSATA 256GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: EXT4AD0Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 7 15:27:36 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Unexpected SCT status 0x0001 (action_code=4, function_code=2) +Wt Cache Reorder: Unknown (SCT Feature Control command failed) + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED +See vendor-specific Attribute list for marginal Attributes. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 80) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 001 010 Past 0 + 12 Power_Cycle_Count -O--CK 097 097 000 - 2313 +175 Program_Fail_Count_Chip -O--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--C- 093 093 005 - 83 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 001 010 Past 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 001 010 Past 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 4393 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 +195 ECC_Error_Rate -O-RC- 200 200 000 - 0 +241 Total_LBAs_Written -O--CK 099 099 000 - 13905732505 +242 Total_LBAs_Read -O--CK 099 099 000 - 18407587870 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 16 Device vendor specific log +0xce GPL,SL VS 16 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: ?/ ? Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/36411 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 10 minutes +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: ?/ ? Celsius +Min/Max Temperature Limit: ?/ ? Celsius +Temperature History Size (Index): 128 (7) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 2228 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD PM871/SSD PM871b M.2 2280 256GB/11F61578CED6 b/SSD/Samsung/SSD PM871/SSD PM871b M.2 2280 256GB/11F61578CED6 new file mode 100644 index 000000000..01946a6eb --- /dev/null +++ b/SSD/Samsung/SSD PM871/SSD PM871b M.2 2280 256GB/11F61578CED6 @@ -0,0 +1,209 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SAMSUNG SSD PM871b M.2 2280 256GB +Serial Number: -- +LU WWN Device Id: 5 002538 ... +Firmware Version: MVT23D0Q +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 10 16:15:33 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 85) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 + 9 Power_On_Hours -O--CK 099 099 000 - 3810 + 12 Power_Cycle_Count PO--CK 098 098 000 - 1494 +175 Program_Fail_Count_Chip PO--CK 100 100 010 - 0 +176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 +177 Wear_Leveling_Count PO--C- 094 094 005 - 71 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 631 +181 Program_Fail_Cnt_Total PO--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0 +187 Reported_Uncorrect PO--CK 100 100 000 - 0 +194 Temperature_Celsius PO--CK 065 040 000 - 35 +195 Hardware_ECC_Recovered PO-RC- 200 200 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 +238 Unknown_Attribute -O--C- 094 094 000 - 94 +241 Total_LBAs_Written PO--CK 099 099 000 - 29860023228 +242 Total_LBAs_Read PO--CK 099 099 000 - 5161515073 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x13 GPL R/O 1 SATA NCQ Send and Receive log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Aborted by host 90% 2478 - +# 2 Extended offline Aborted by host 90% 2478 - +# 3 Short offline Completed without error 00% 2478 - +# 4 Short offline Completed without error 00% 2477 - +# 5 Short offline Completed without error 00% 280 - +# 6 Short offline Aborted by host 90% 280 - +# 7 Short offline Aborted by host 90% 280 - +# 8 Offline Completed without error 00% 117 - +# 9 Short offline Completed without error 00% 117 - +#10 Offline Completed without error 00% 12 - +#11 Short offline Completed without error 00% 12 - +#12 Short offline Completed without error 00% 4 - +#13 Short offline Completed without error 00% 4 - +#14 Short offline Completed without error 00% 4 - +#15 Short offline Completed without error 00% 4 - +#16 Short offline Completed without error 00% 1 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 255 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 256 (0x0100) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 34/38 Celsius +Lifetime Min/Max Temperature: 15/60 Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 10 minutes +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (46) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1494 --- Lifetime Power-On Resets +0x01 0x010 4 3810 --- Power-on Hours +0x01 0x018 6 29860023228 --- Logical Sectors Written +0x01 0x020 6 0 --- Number of Write Commands +0x01 0x028 6 5161515073 --- Logical Sectors Read +0x01 0x030 6 0 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x020 1 60 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x058 1 55 --- Specified Maximum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 7980 --- Number of Hardware Resets +0x06 0x010 4 0 --- Number of ASR Events +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 15 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD RBX Series/SSD RBX Series 64GB M/28E948E63BE2 b/SSD/Samsung/SSD RBX Series/SSD RBX Series 64GB M/28E948E63BE2 new file mode 100644 index 000000000..369695db7 --- /dev/null +++ b/SSD/Samsung/SSD RBX Series/SSD RBX Series 64GB M/28E948E63BE2 @@ -0,0 +1,224 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-STABLE amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SAMSUNG SSD RBX Series 64GB M +Serial Number: -- +LU WWN Device Id: 5 0000f0 ... +Firmware Version: VAM05D1Q +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Sun Jul 26 12:32:49 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM level is: 254 (maximum performance), recommended: 128 +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 12) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 094 094 000 - 28373 + 12 Power_Cycle_Count -O--CK 095 095 000 - 4327 +175 Program_Fail_Count_Chip -O--CK 100 100 012 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 012 - 0 +177 Wear_Leveling_Count PO--C- 100 100 023 - 0 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 093 093 012 - 4 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 30 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 050 050 010 - 1954 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Reported_Uncorrect PO--CK 100 100 000 - 0 +195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 253 253 000 - 0 +232 Available_Reservd_Space PO--C- 095 095 012 - 58 +233 Media_Wearout_Indicator -O--CK 092 092 000 - 312545272 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 0 +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 1 Host vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 28 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 28 [3] occurred at disk power-on lifetime: 25404 hours (1058 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 74 0a b0 47 00 Error: IDNF 1 sectors at LBA = 0x07740ab0 = 125045424 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 01 00 00 00 74 0a b0 47 00 00:00:09.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 01 40 00 00:00:09.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:09.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:09.000 READ DMA + b0 00 da 00 00 00 00 00 c2 4f 00 40 00 00:00:08.000 SMART RETURN STATUS + +Error 27 [2] occurred at disk power-on lifetime: 25404 hours (1058 days + 12 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 74 0a b0 47 00 Error: IDNF 1 sectors at LBA = 0x07740ab0 = 125045424 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 01 00 00 00 74 0a b0 47 00 00:00:11.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 01 40 00 00:00:11.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:11.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:11.000 READ DMA + b0 00 da 00 00 00 00 00 c2 4f 00 40 00 00:00:10.000 SMART RETURN STATUS + +Error 26 [1] occurred at disk power-on lifetime: 25402 hours (1058 days + 10 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 74 0a b0 47 00 Error: IDNF 1 sectors at LBA = 0x07740ab0 = 125045424 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 01 00 00 00 74 0a b0 47 00 00:00:10.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 01 40 00 00:00:10.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:10.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:10.000 READ DMA + b0 00 da 00 00 00 00 00 c2 4f 00 40 00 00:00:08.000 SMART RETURN STATUS + +Error 25 [0] occurred at disk power-on lifetime: 25399 hours (1058 days + 7 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 74 0a b0 47 00 Error: IDNF 1 sectors at LBA = 0x07740ab0 = 125045424 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 01 00 00 00 74 0a b0 47 00 00:00:10.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 01 40 00 00:00:10.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:10.000 READ DMA + c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:10.000 READ DMA + b0 00 da 00 00 00 00 00 c2 4f 00 40 00 00:00:09.000 SMART RETURN STATUS + +Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 27540 - +# 2 Short offline Completed without error 00% 27493 - +# 3 Short offline Completed without error 00% 23863 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Samsung/SSD UM410/SSD UM410 Series 2.5-inch 16GB/9F6EB1E9B947 b/SSD/Samsung/SSD UM410/SSD UM410 Series 2.5-inch 16GB/9F6EB1E9B947 new file mode 100644 index 000000000..149b6af24 --- /dev/null +++ b/SSD/Samsung/SSD UM410/SSD UM410 Series 2.5-inch 16GB/9F6EB1E9B947 @@ -0,0 +1,206 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SAMSUNG SSD UM410 Series 2.5" 16GB +Serial Number: -- +LU WWN Device Id: 5 0000f0 ... +Firmware Version: VAM12D1Q +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 +Local Time is: Thu Aug 20 14:44:25 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 4) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--CK 099 099 000 - 915 + 12 Power_Cycle_Count -O--CK 099 099 000 - 800 +175 Program_Fail_Count_Chip -O--CK 100 100 012 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 012 - 0 +177 Wear_Leveling_Count PO--C- 093 093 017 - 374 +178 Used_Rsvd_Blk_Cnt_Chip PO--C- 098 098 012 - 1 +179 Used_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 4 +180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 013 013 010 - 476 +181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 +183 Runtime_Bad_Block PO--C- 100 100 010 - 0 +187 Reported_Uncorrect PO--CK 099 099 000 - 24 +195 Hardware_ECC_Recovered -O-RC- 199 199 000 - 24 +198 Offline_Uncorrectable ----CK 100 100 000 - 0 +199 UDMA_CRC_Error_Count -OSRCK 253 253 000 - 0 +232 Available_Reservd_Space PO--C- 096 096 012 - 59 +233 Media_Wearout_Indicator -O--CK 087 087 000 - 556295342 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 0 +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 1 Host vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 44 (device log contains only the most recent 4 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 44 [3] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 04 00 00 00 00 64 a5 4d 00 Error: IDNF 4 sectors at LBA = 0x0d0064a5 = 218129573 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 04 00 00 00 00 64 a5 4d 00 00:29:25.000 READ DMA + +Error 43 [2] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 04 00 00 00 00 64 a9 4d 00 Error: IDNF 4 sectors at LBA = 0x0d0064a9 = 218129577 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 04 00 00 00 00 64 a9 4d 00 00:29:25.000 READ DMA + +Error 42 [1] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 04 00 00 00 00 68 65 4d 00 Error: IDNF 4 sectors at LBA = 0x0d006865 = 218130533 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 04 00 00 00 00 68 65 4d 00 00:29:25.000 READ DMA + +Error 41 [0] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 10 -- 51 00 01 00 00 00 00 64 65 4d 00 Error: IDNF 1 sectors at LBA = 0x0d006465 = 218129509 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + c8 00 00 00 01 00 00 00 00 64 65 4d 00 00:29:25.000 READ DMA + +Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/SanDisk/SD6/SD6SB1M064G1022I/541010E65282 b/SSD/SanDisk/SD6/SD6SB1M064G1022I/541010E65282 new file mode 100644 index 000000000..3bf4eb270 --- /dev/null +++ b/SSD/SanDisk/SD6/SD6SB1M064G1022I/541010E65282 @@ -0,0 +1,132 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.0-RELEASE-p12 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SD6SB1M064G1022I +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X230600 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: Unknown (0x000a) +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 20 12:36:17 2020 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 253 100 --- - 9510 + 12 Power_Cycle_Count -O--CK 100 100 --- - 72 +166 Min_W/E_Cycle -O--CK 100 100 --- - 1 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 19 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 527 +169 Total_Bad_Block -O--CK 100 100 --- - 82 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 --- - 308 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 46 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 071 044 --- - 29 (Min/Max 16/44) +212 SATA_PHY_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 0 0 2586 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 19979 +241 Total_Writes_GiB ----CK 253 253 --- - 2344 +242 Total_Reads_GiB ----CK 253 253 --- - 2222 +243 Unknown_Attribute -O--CK 100 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 10 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/SD6/SD6SB1M064G1022I/634BEE3EDBAD b/SSD/SanDisk/SD6/SD6SB1M064G1022I/634BEE3EDBAD new file mode 100644 index 000000000..86d9848c4 --- /dev/null +++ b/SSD/SanDisk/SD6/SD6SB1M064G1022I/634BEE3EDBAD @@ -0,0 +1,151 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SD6SB1M064G1022I +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X231600 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: Unknown (0x000a) +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:33:08 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 253 100 --- - 33597 + 12 Power_Cycle_Count -O--CK 100 100 --- - 57 +166 Min_W/E_Cycle -O--CK 100 100 --- - 1 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 15 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 1144 +169 Total_Bad_Block -O--CK 100 100 --- - 83 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 --- - 836 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 28 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 072 035 --- - 28 (Min/Max 23/35) +212 SATA_PHY_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 0 0 6998 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 54421 +241 Total_Writes_GiB ----CK 253 253 --- - 16473 +242 Total_Reads_GiB ----CK 253 253 --- - 949 +243 Unknown_Attribute -O--CK 100 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 11975 - +# 2 Short offline Completed without error 00% 11951 - +# 3 Short offline Completed without error 00% 11927 - +# 4 Short offline Completed without error 00% 11903 - +# 5 Extended offline Completed without error 00% 11883 - +# 6 Short offline Completed without error 00% 11879 - +# 7 Short offline Completed without error 00% 11855 - +# 8 Short offline Completed without error 00% 11831 - +# 9 Short offline Completed without error 00% 11807 - +#10 Short offline Completed without error 00% 11783 - +#11 Short offline Completed without error 00% 11759 - +#12 Short offline Completed without error 00% 11735 - +#13 Extended offline Completed without error 00% 11714 - +#14 Short offline Completed without error 00% 11711 - +#15 Short offline Completed without error 00% 11687 - +#16 Short offline Completed without error 00% 11663 - +#17 Short offline Completed without error 00% 11639 - +#18 Short offline Completed without error 00% 11615 - +#19 Short offline Completed without error 00% 11591 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 27 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 30 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/SD6/SD6SB1M128G1022I/EAB027D59183 b/SSD/SanDisk/SD6/SD6SB1M128G1022I/EAB027D59183 new file mode 100644 index 000000000..3f88a5abd --- /dev/null +++ b/SSD/SanDisk/SD6/SD6SB1M128G1022I/EAB027D59183 @@ -0,0 +1,87 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SD6SB1M128G1022I +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X231600 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: Unknown (0x000a) +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Oct 19 11:09:56 2020 BST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 + 9 Power_On_Hours 0x0032 253 100 --- Old_age Always - 3359 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 1742 +166 Min_W/E_Cycle 0x0032 100 100 --- Old_age Always - 1 +167 Min_Bad_Block/Die 0x0032 100 100 --- Old_age Always - 31 +168 Maximum_Erase_Cycle 0x0032 100 100 --- Old_age Always - 148 +169 Total_Bad_Block 0x0032 100 100 --- Old_age Always - 220 +171 Program_Fail_Count 0x0032 100 100 --- Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 --- Old_age Always - 0 +173 Avg_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 58 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 --- Old_age Always - 74 +187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 +194 Temperature_Celsius 0x0022 075 039 --- Old_age Always - 25 (Min/Max 6/39) +212 SATA_PHY_Error 0x0032 100 100 --- Old_age Always - 1 +230 Perc_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 0 0 349 +232 Perc_Avail_Resrvd_Space 0x0033 100 100 004 Pre-fail Always - 100 +233 Total_NAND_Writes_GiB 0x0032 100 100 --- Old_age Always - 7608 +241 Total_Writes_GiB 0x0030 253 253 --- Old_age Offline - 3518 +242 Total_Reads_GiB 0x0030 253 253 --- Old_age Offline - 3796 +243 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + + + diff --git a/SSD/SanDisk/SD6/SD6SB1M256G1022I/0120C58507D9 b/SSD/SanDisk/SD6/SD6SB1M256G1022I/0120C58507D9 new file mode 100644 index 000000000..5cb99617c --- /dev/null +++ b/SSD/SanDisk/SD6/SD6SB1M256G1022I/0120C58507D9 @@ -0,0 +1,151 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SD6SB1M256G1022I +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X231600 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: Unknown (0x000a) +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:35:53 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 48 + 9 Power_On_Hours -O--CK 253 100 --- - 42099 + 12 Power_Cycle_Count -O--CK 100 100 --- - 55 +166 Min_W/E_Cycle -O--CK 100 100 --- - 1 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 28 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 5526 +169 Total_Bad_Block -O--CK 100 100 --- - 351 +171 Program_Fail_Count -O--CK 100 100 --- - 48 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 --- - 5288 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 27 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 068 044 --- - 32 (Min/Max 25/44) +212 SATA_PHY_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 0 0 45082 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 99 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 1378638 +241 Total_Writes_GiB ----CK 253 253 --- - 444163 +242 Total_Reads_GiB ----CK 253 253 --- - 15057 +243 Unknown_Attribute -O--CK 100 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 34559 - +# 2 Short offline Completed without error 00% 34535 - +# 3 Short offline Completed without error 00% 34511 - +# 4 Short offline Completed without error 00% 34487 - +# 5 Short offline Completed without error 00% 34463 - +# 6 Short offline Completed without error 00% 34439 - +# 7 Short offline Completed without error 00% 34415 - +# 8 Short offline Completed without error 00% 34391 - +# 9 Short offline Completed without error 00% 34367 - +#10 Short offline Completed without error 00% 34343 - +#11 Short offline Completed without error 00% 29964 - +#12 Short offline Completed without error 00% 29940 - +#13 Short offline Completed without error 00% 29916 - +#14 Short offline Completed without error 00% 29892 - +#15 Short offline Completed without error 00% 29868 - +#16 Short offline Completed without error 00% 29844 - +#17 Short offline Completed without error 00% 29820 - +#18 Short offline Completed without error 00% 29796 - +#19 Short offline Completed without error 00% 29772 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 176 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/SD6/SD6SB1M256G1022I/EA2E00FA2DDB b/SSD/SanDisk/SD6/SD6SB1M256G1022I/EA2E00FA2DDB new file mode 100644 index 000000000..b68ab8f52 --- /dev/null +++ b/SSD/SanDisk/SD6/SD6SB1M256G1022I/EA2E00FA2DDB @@ -0,0 +1,151 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SD6SB1M256G1022I +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X231600 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: Unknown (0x000a) +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 06:35:53 2020 PDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 39 + 9 Power_On_Hours -O--CK 253 100 --- - 42099 + 12 Power_Cycle_Count -O--CK 100 100 --- - 55 +166 Min_W/E_Cycle -O--CK 100 100 --- - 1 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 33 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 5510 +169 Total_Bad_Block -O--CK 100 100 --- - 312 +171 Program_Fail_Count -O--CK 100 100 --- - 39 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 --- - 5295 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 27 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 067 045 --- - 33 (Min/Max 24/45) +212 SATA_PHY_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 0 0 45106 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 99 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 1381698 +241 Total_Writes_GiB ----CK 253 253 --- - 444184 +242 Total_Reads_GiB ----CK 253 253 --- - 14366 +243 Unknown_Attribute -O--CK 100 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 34559 - +# 2 Short offline Completed without error 00% 34535 - +# 3 Short offline Completed without error 00% 34511 - +# 4 Short offline Completed without error 00% 34487 - +# 5 Short offline Completed without error 00% 34463 - +# 6 Short offline Completed without error 00% 34439 - +# 7 Short offline Completed without error 00% 34415 - +# 8 Short offline Completed without error 00% 34391 - +# 9 Short offline Completed without error 00% 34367 - +#10 Short offline Completed without error 00% 34343 - +#11 Short offline Completed without error 00% 29964 - +#12 Short offline Completed without error 00% 29940 - +#13 Short offline Completed without error 00% 29916 - +#14 Short offline Completed without error 00% 29892 - +#15 Short offline Completed without error 00% 29868 - +#16 Short offline Completed without error 00% 29844 - +#17 Short offline Completed without error 00% 29820 - +#18 Short offline Completed without error 00% 29796 - +#19 Short offline Completed without error 00% 29772 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 176 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 6 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/SD6/SD6SB2M512G1022I/951ECDA9602F b/SSD/SanDisk/SD6/SD6SB2M512G1022I/951ECDA9602F new file mode 100644 index 000000000..acf7485ee --- /dev/null +++ b/SSD/SanDisk/SD6/SD6SB2M512G1022I/951ECDA9602F @@ -0,0 +1,131 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SD6SB2M512G1022I +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X210400 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 5.25 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 20 12:26:07 2020 +07 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 1 + 9 Power_On_Hours -O--CK 253 100 --- - 12879 + 12 Power_Cycle_Count -O--CK 100 100 --- - 101 +166 Min_W/E_Cycle -O--CK 100 100 --- - 156 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 43 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 412 +169 Total_Bad_Block -O--CK 100 100 --- - 512 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 --- - 237 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 79 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 041 067 --- - 59 (Min/Max 51/67) +212 SATA_PHY_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 0 0 1882 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 99 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 97906 +241 Total_Writes_GiB ----CK 253 253 --- - 20796 +242 Total_Reads_GiB ----CK 253 253 --- - 22834 +243 Unknown_Attribute -O--CK 100 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 382 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 31 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/SanDisk/SD7/SD7SF6S512G1122/7553B1015027 b/SSD/SanDisk/SD7/SD7SF6S512G1122/7553B1015027 new file mode 100644 index 000000000..fdd4285c5 --- /dev/null +++ b/SSD/SanDisk/SD7/SD7SF6S512G1122/7553B1015027 @@ -0,0 +1,145 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SanDisk SD7SF6S512G1122 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X3510000 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 30 21:59:15 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 253 100 --- - 25760 + 12 Power_Cycle_Count -O--CK 100 100 --- - 3800 +165 Unknown_Attribute -O--CK 100 100 --- - 506969458839 +166 Unknown_Attribute -O--CK 100 100 --- - 1 +167 Unknown_Attribute -O--CK 100 100 --- - 23 +168 Unknown_Attribute -O--CK 100 100 --- - 15 +169 Unknown_Attribute -O--CK 100 100 --- - 588 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Unknown_Attribute -O--CK 100 100 --- - 0 +172 Unknown_Attribute -O--CK 100 100 --- - 0 +173 Unknown_Attribute -O--CK 100 100 --- - 6 +174 Unknown_Attribute -O--CK 100 100 --- - 283 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 058 068 --- - 42 (Min/Max 15/68) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Unknown_SSD_Attribute -O--CK 100 100 --- - 3582008296258 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 --- - 3265 +234 Unknown_Attribute -O--CK 100 100 --- - 22880 +241 Total_LBAs_Written ----CK 253 253 --- - 21962 +242 Total_LBAs_Read ----CK 253 253 --- - 11795 +244 Unknown_Attribute -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 20905 - +# 2 Short offline Completed without error 00% 20905 - +# 3 Extended offline Completed without error 00% 6504 - +# 4 Short offline Completed without error 00% 5459 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 3800 --- Lifetime Power-On Resets +0x01 0x018 6 596017370326 --- Logical Sectors Written +0x01 0x020 6 53296390 --- Number of Write Commands +0x01 0x028 6 244256959564 --- Logical Sectors Read +0x01 0x030 6 61714870 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/SanDisk/SD7/SD7SN3Q128G1002/E98B01339936 b/SSD/SanDisk/SD7/SD7SN3Q128G1002/E98B01339936 new file mode 100644 index 000000000..04aac6e34 --- /dev/null +++ b/SSD/SanDisk/SD7/SD7SN3Q128G1002/E98B01339936 @@ -0,0 +1,139 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SanDisk SD7SN3Q128G1002 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X2170002 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Sep 25 08:40:27 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 253 100 --- - 3144 + 12 Power_Cycle_Count -O--CK 100 100 --- - 2913 +166 Unknown_Attribute -O--CK 100 100 --- - 2 +167 Unknown_Attribute -O--CK 100 100 --- - 38 +168 Unknown_Attribute -O--CK 100 100 --- - 124 +169 Unknown_Attribute -O--CK 100 100 --- - 295 +171 Unknown_Attribute -O--CK 100 100 --- - 0 +172 Unknown_Attribute -O--CK 100 100 --- - 0 +173 Unknown_Attribute -O--CK 100 100 --- - 26 +174 Unknown_Attribute -O--CK 100 100 --- - 464 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 068 060 --- - 32 (Min/Max 13/60) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +212 Unknown_Attribute -O--CK 100 100 --- - 0 +230 Unknown_SSD_Attribute -O--CK 100 100 --- - 86 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 --- - 3498 +241 Total_LBAs_Written ----CK 253 253 --- - 1712 +242 Total_LBAs_Read ----CK 253 253 --- - 2026 +244 Unknown_Attribute -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2913 --- Lifetime Power-On Resets +0x01 0x018 6 27813440308 --- Logical Sectors Written +0x01 0x020 6 17043040 --- Number of Write Commands +0x01 0x028 6 37259466562 --- Logical Sectors Read +0x01 0x030 6 17935787 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/SanDisk/SD7/SD7UB3Q256G1001/DDD3C1DE40D2 b/SSD/SanDisk/SD7/SD7UB3Q256G1001/DDD3C1DE40D2 new file mode 100644 index 000000000..02402355e --- /dev/null +++ b/SSD/SanDisk/SD7/SD7UB3Q256G1001/DDD3C1DE40D2 @@ -0,0 +1,93 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SanDisk based SSDs +Device Model: SanDisk SD7UB3Q256G1001 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X2230501 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 15:12:26 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 100 + 9 Power_On_Hours 0x0032 253 100 --- Old_age Always - 2022 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 1737 +166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 12 +167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 31 +168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 117 +169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 461 +170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +171 Program_Fail_Count 0x0032 100 100 --- Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 --- Old_age Always - 0 +173 Avg_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 40 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 --- Old_age Always - 45 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 --- Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 --- Old_age Always - 13888 +184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 +194 Temperature_Celsius 0x0022 067 064 --- Old_age Always - 33 (Min/Max 19/64) +199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 +212 SATA_PHY_Error 0x0032 100 100 --- Old_age Always - 0 +230 Perc_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 289 +232 Perc_Avail_Resrvd_Space 0x0033 100 100 004 Pre-fail Always - 100 +233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 9704 +241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 1166 +242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 443 +244 Thermal_Throttle 0x0032 000 100 --- Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + + + diff --git a/SSD/SanDisk/SD8/SD8SN8U-256G-1006/3DC5E385AA2D b/SSD/SanDisk/SD8/SD8SN8U-256G-1006/3DC5E385AA2D new file mode 100644 index 000000000..20ea9f6a9 --- /dev/null +++ b/SSD/SanDisk/SD8/SD8SN8U-256G-1006/3DC5E385AA2D @@ -0,0 +1,195 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SD8SN8U-256G-1006 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X4120006 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: < 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Jul 30 22:22:52 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x53) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 32 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 3129 + 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 21331 + 12 Power_Cycle_Count -O--CK 100 100 --- - 58 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 005 - 1 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 34 +176 Erase_Fail_Count_Chip -O---K 100 100 --- - 2176 +181 Program_Fail_Cnt_Total -O---K 100 100 --- - 0 +183 Runtime_Bad_Block -O--CK 100 100 --- - 0 +184 End-to-End_Error PO-RCK 100 100 097 - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 037 064 --- - 37 (Min/Max 20/64) +198 Offline_Uncorrectable ----CK 100 100 --- - 0 +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +201 Lifetime_Remaining% PO---K 100 100 005 - 1 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 55 55 14 +241 Total_Writes_GiB -O--CK 100 100 --- - 65991 +242 Total_Reads_GiB -O--CK 100 100 --- - 225156 +243 Unknown_Attribute -O--CK 100 100 --- - 73423 +244 Thermal_Throttle -O--CK 000 100 --- - 0 +249 TLC_NAND_GB_Writes -O--CK 100 100 --- - 261 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 257 (0x0101) +Device State: Active (0) +Current Temperature: 36 Celsius +Power Cycle Min/Max Temperature: 35/38 Celsius +Lifetime Min/Max Temperature: 35/38 Celsius +Specified Max Operating Temperature: 36 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +01 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 0/70 Celsius +Min/Max Temperature Limit: -15/90 Celsius +Temperature History Size (Index): 256 (89) + +SCT Error Recovery Control: + Read: Disabled + Write: Disabled + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 58 --- Lifetime Power-On Resets +0x01 0x010 4 43 --- Power-on Hours +0x01 0x018 6 0 --- Logical Sectors Written +0x01 0x020 6 2162418562 --- Number of Write Commands +0x01 0x028 6 7377938754 --- Logical Sectors Read +0x01 0x030 6 0 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 23 --- Current Temperature +0x05 0x020 1 70 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x058 1 70 --- Specified Maximum Operating Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 70 --- Number of Hardware Resets +0x06 0x010 4 29 --- Number of ASR Events +0x06 0x018 4 2 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/SD8/SD8SN8U128G1122/110FE2B59E67 b/SSD/SanDisk/SD8/SD8SN8U128G1122/110FE2B59E67 new file mode 100644 index 000000000..6837fd7f8 --- /dev/null +++ b/SSD/SanDisk/SD8/SD8SN8U128G1122/110FE2B59E67 @@ -0,0 +1,146 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SD8SN8U128G1122 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X4162000 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 16:15:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 18878 + 12 Power_Cycle_Count -O--CK 100 100 --- - 22 +165 Total_Write/Erase_Count -O--CK 100 100 --- - 2753521129822 +166 Min_W/E_Cycle -O--CK 100 100 --- - 175 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 26 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 264 +169 Total_Bad_Block -O--CK 100 100 --- - 133 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 --- - 211 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 11 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 063 058 --- - 37 (Min/Max 21/58) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 4663 7694 7694 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 25276 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 --- - 27656 +241 Total_Writes_GiB ----CK 253 253 --- - 22961 +242 Total_Reads_GiB ----CK 253 253 --- - 2295 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 10673 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 6003 --- Power-on Hours +0x01 0x018 6 48154109440 --- Logical Sectors Written +0x01 0x020 6 161135905 --- Number of Write Commands +0x01 0x028 6 4813536837 --- Logical Sectors Read +0x01 0x030 6 106563967 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 30 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/SD8/SD8SN8U128G1122/D84774C43A6F b/SSD/SanDisk/SD8/SD8SN8U128G1122/D84774C43A6F new file mode 100644 index 000000000..b8becc20a --- /dev/null +++ b/SSD/SanDisk/SD8/SD8SN8U128G1122/D84774C43A6F @@ -0,0 +1,146 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SD8SN8U128G1122 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X4162000 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 16:15:06 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 21865 + 12 Power_Cycle_Count -O--CK 100 100 --- - 22 +165 Total_Write/Erase_Count -O--CK 100 100 --- - 55706243 +166 Min_W/E_Cycle -O--CK 100 100 --- - 0 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 18 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 1 +169 Total_Bad_Block -O--CK 100 100 --- - 102 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 --- - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 11 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 062 053 --- - 38 (Min/Max 21/53) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 339 0 339 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 89 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 --- - 2739 +241 Total_Writes_GiB ----CK 253 253 --- - 2689 +242 Total_Reads_GiB ----CK 253 253 --- - 1231 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 13642 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 22 --- Lifetime Power-On Resets +0x01 0x010 4 328 --- Power-on Hours +0x01 0x018 6 5641004215 --- Logical Sectors Written +0x01 0x020 6 235954867 --- Number of Write Commands +0x01 0x028 6 2582084187 --- Logical Sectors Read +0x01 0x030 6 133947530 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/SD9/SD9SN8W128G1102/47CEFBA093C0 b/SSD/SanDisk/SD9/SD9SN8W128G1102/47CEFBA093C0 new file mode 100644 index 000000000..74aa76a75 --- /dev/null +++ b/SSD/SanDisk/SD9/SD9SN8W128G1102/47CEFBA093C0 @@ -0,0 +1,91 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SanDisk SD9SN8W128G1102 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X6106002 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 16:02:30 2020 +10 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 2367 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 369 +165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 25826689814 +166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 3 +167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 26 +168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 15 +169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 77 +170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 8 +174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 98 +184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 +194 Temperature_Celsius 0x0022 062 054 --- Old_age Always - 38 (Min/Max 16/54) +199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 +230 Unknown_SSD_Attribute 0x0032 001 001 --- Old_age Always - 1348624974138 +232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100 +233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 1120 +234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 2222 +241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 1815 +242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 1810 +244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + + + diff --git a/SSD/SanDisk/SDSSDA/SDSSDA120G/CAD3BDB33221 b/SSD/SanDisk/SDSSDA/SDSSDA120G/CAD3BDB33221 new file mode 100644 index 000000000..454effdb9 --- /dev/null +++ b/SSD/SanDisk/SDSSDA/SDSSDA120G/CAD3BDB33221 @@ -0,0 +1,200 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SandForce Driven SSDs +Device Model: SanDisk SDSSDA120G +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: Z22000RL +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 08:08:58 2020 IST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Retired_Block_Count -O--CK 100 100 000 - 0 + 9 Power_On_Hours_and_Msec -O--CK 243 100 000 - 243h+00m+00.000s + 12 Power_Cycle_Count -O--CK 100 100 000 - 1462 +166 Unknown_Attribute -O--CK 100 100 000 - 117 +167 Unknown_Attribute -O--CK 100 100 000 - 0 +168 Unknown_Attribute -O--CK 100 100 000 - 168 +169 Unknown_Attribute -O--CK 100 100 000 - 48 +170 Reserve_Block_Count -O--CK 100 100 000 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Unknown_SandForce_Attr -O--CK 100 100 --- - 154 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 63 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 066 100 000 - 34 (Min/Max 0/54) +199 SATA_CRC_Error_Count -O--CK 100 100 000 - 1 +230 Life_Curve_Status -O--CK 100 100 000 - 5 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 SandForce_Internal -O--CK 100 100 000 - 17077 +241 Lifetime_Writes_GiB ----CK 253 253 000 - 1875 +242 Lifetime_Reads_GiB ----CK 253 253 000 - 1800 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +Device Error Count: 1 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 1 [0] log entry is empty +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1462 --- Lifetime Power-On Resets +0x01 0x010 4 243 --- Power-on Hours +0x01 0x018 6 1875 --- Logical Sectors Written +0x01 0x020 6 49014056 --- Number of Write Commands +0x01 0x028 6 1800 --- Logical Sectors Read +0x01 0x030 6 53786097 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 63 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 -64 --- Average Short Term Temperature +0x05 0x018 1 -64 --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 3 --- Lowest Temperature +0x05 0x030 1 -1 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 -1 --- Highest Average Long Term Temperature +0x05 0x048 1 0 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 100 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 6807 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/SanDisk/SDSSDH/SDSSDH3512G/A6E2CD818FBA b/SSD/SanDisk/SDSSDH/SDSSDH3512G/A6E2CD818FBA new file mode 100644 index 000000000..b42b52d61 --- /dev/null +++ b/SSD/SanDisk/SDSSDH/SDSSDH3512G/A6E2CD818FBA @@ -0,0 +1,87 @@ +smartctl 7.1 2019-12-30 r5022 [NetBSD 9.99.71 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SanDisk SDSSDH3512G +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X6107000 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:58:36 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 9963 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 136 +165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 6291511 +166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 78 +168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1 +169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 538 +170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 52 +184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 +194 Temperature_Celsius 0x0022 065 039 --- Old_age Always - 35 (Min/Max 15/39) +199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 +230 Unknown_SSD_Attribute 0x0032 100 100 --- Old_age Always - 47244640267 +232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100 +233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 311 +234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 677 +241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 1562 +242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 281 +244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/SSD/SanDisk/SDSSDH3/SDSSDH3 250G/4B895CB8825C b/SSD/SanDisk/SDSSDH3/SDSSDH3 250G/4B895CB8825C new file mode 100644 index 000000000..57410f5f2 --- /dev/null +++ b/SSD/SanDisk/SDSSDH3/SDSSDH3 250G/4B895CB8825C @@ -0,0 +1,144 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SanDisk SDSSDH3 250G +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: 401120RL +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Jul 19 17:54:53 2020 +05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 21 + 12 Power_Cycle_Count -O--CK 100 100 --- - 9 +165 Unknown_Attribute -O--CK 100 100 --- - 786439 +166 Unknown_Attribute -O--CK 100 100 --- - 0 +167 Unknown_Attribute -O--CK 100 100 --- - 36 +168 Unknown_Attribute -O--CK 100 100 --- - 1 +169 Unknown_Attribute -O--CK 100 100 --- - 170 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Unknown_Attribute -O--CK 100 100 --- - 0 +172 Unknown_Attribute -O--CK 100 100 --- - 0 +173 Unknown_Attribute -O--CK 100 100 --- - 0 +174 Unknown_Attribute -O--CK 100 100 --- - 2 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 062 044 --- - 38 (Min/Max 33/44) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Unknown_SSD_Attribute -O--CK 001 001 --- - 4294967297 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 --- - 23 +234 Unknown_Attribute -O--CK 100 100 --- - 47 +241 Total_LBAs_Written ----CK 253 253 --- - 68 +242 Total_LBAs_Read ----CK 253 253 --- - 260 +244 Unknown_Attribute -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 1797 Current Device Internal Status Data log +0x25 GPL R/O 1797 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 9 --- Lifetime Power-On Resets +0x01 0x010 4 21 --- Power-on Hours +0x01 0x018 6 144342540 --- Logical Sectors Written +0x01 0x020 6 2649136 --- Number of Write Commands +0x01 0x028 6 546757758 --- Logical Sectors Read +0x01 0x030 6 4650299 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 42 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/SanDisk/SDSSDH3/SDSSDH3 512G/71CBD3CF818F b/SSD/SanDisk/SDSSDH3/SDSSDH3 512G/71CBD3CF818F new file mode 100644 index 000000000..ef8517a4f --- /dev/null +++ b/SSD/SanDisk/SDSSDH3/SDSSDH3 512G/71CBD3CF818F @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SanDisk SDSSDH3 512G +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: 40101000 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 14 00:36:20 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 2789 + 12 Power_Cycle_Count -O--CK 100 100 --- - 1044 +165 Unknown_Attribute -O--CK 100 100 --- - 7143507 +166 Unknown_Attribute -O--CK 100 100 --- - 0 +167 Unknown_Attribute -O--CK 100 100 --- - 42 +168 Unknown_Attribute -O--CK 100 100 --- - 2 +169 Unknown_Attribute -O--CK 100 100 --- - 293 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Unknown_Attribute -O--CK 100 100 --- - 0 +172 Unknown_Attribute -O--CK 100 100 --- - 0 +173 Unknown_Attribute -O--CK 100 100 --- - 0 +174 Unknown_Attribute -O--CK 100 100 --- - 16 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 072 036 --- - 28 (Min/Max 21/36) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Unknown_SSD_Attribute -O--CK 001 001 --- - 68719476752 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 --- - 510 +234 Unknown_Attribute -O--CK 100 100 --- - 967 +241 Total_LBAs_Written ----CK 253 253 --- - 795 +242 Total_LBAs_Read ----CK 253 253 --- - 527 +244 Unknown_Attribute -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 1941 Current Device Internal Status Data log +0x25 GPL R/O 1941 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 2775 - +# 2 Extended offline Completed without error 00% 2762 - +# 3 Short offline Completed without error 00% 2738 - +# 4 Short offline Completed without error 00% 2734 - +# 5 Short offline Completed without error 00% 2712 - +# 6 Short offline Completed without error 00% 2683 - +# 7 Extended offline Completed without error 00% 2673 - +# 8 Short offline Completed without error 00% 2667 - +# 9 Short offline Completed without error 00% 2657 - +#10 Short offline Completed without error 00% 2642 - +#11 Short offline Completed without error 00% 2631 - +#12 Short offline Completed without error 00% 2629 - +#13 Short offline Completed without error 00% 2610 - +#14 Short offline Completed without error 00% 2604 - +#15 Short offline Completed without error 00% 2596 - +#16 Extended offline Completed without error 00% 2589 - +#17 Short offline Completed without error 00% 2568 - +#18 Short offline Completed without error 00% 2552 - +#19 Extended offline Completed without error 00% 2433 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1044 --- Lifetime Power-On Resets +0x01 0x010 4 2789 --- Power-on Hours +0x01 0x018 6 1669021382 --- Logical Sectors Written +0x01 0x020 6 18841756 --- Number of Write Commands +0x01 0x028 6 1107214977 --- Logical Sectors Read +0x01 0x030 6 14966216 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/SDSSDHII/SDSSDHII120G/A59BE28A870D b/SSD/SanDisk/SDSSDHII/SDSSDHII120G/A59BE28A870D new file mode 100644 index 000000000..3e4ef4626 --- /dev/null +++ b/SSD/SanDisk/SDSSDHII/SDSSDHII120G/A59BE28A870D @@ -0,0 +1,143 @@ +smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build) +Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SDSSDHII120G +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X31200RL +User Capacity: 120,033,041,920 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 29 15:33:01 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 253 100 --- - 14728 + 12 Power_Cycle_Count -O--CK 100 100 --- - 7520 +165 Total_Write/Erase_Count -O--CK 100 100 --- - 2431299556265 +166 Min_W/E_Cycle -O--CK 100 100 --- - 111 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 22 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 171 +169 Total_Bad_Block -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 --- - 139 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 304 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 072 045 --- - 28 (Min/Max 21/45) +199 SATA_CRC_Error -O--CK 100 100 --- - 26 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 1542 6992 6992 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 16042 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 --- - 26557 +241 Total_Writes_GiB ----CK 253 253 --- - 13573 +242 Total_Reads_GiB ----CK 253 253 --- - 14306 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 3767 - +# 2 Short offline Completed without error 00% 3767 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 7520 --- Lifetime Power-On Resets +0x01 0x018 6 39354448336874 --- Logical Sectors Written +0x01 0x020 6 161410895 --- Number of Write Commands +0x01 0x028 6 34094872730131 --- Logical Sectors Read +0x01 0x030 6 166532285 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 27 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 41 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/SDSSDXP/SDSSDXP120G/A0730F78B354 b/SSD/SanDisk/SDSSDXP/SDSSDXP120G/A0730F78B354 new file mode 100644 index 000000000..a4d37c708 --- /dev/null +++ b/SSD/SanDisk/SDSSDXP/SDSSDXP120G/A0730F78B354 @@ -0,0 +1,84 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SDSSDXP120G +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: R1311 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS T13/1699-D revision 6 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 12:58:25 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 + 9 Power_On_Hours 0x0032 253 100 --- Old_age Always - 14606 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 2077 +166 Min_W/E_Cycle 0x0032 100 100 --- Old_age Always - 43 +167 Min_Bad_Block/Die 0x0032 100 100 --- Old_age Always - 20 +168 Maximum_Erase_Cycle 0x0032 100 100 --- Old_age Always - 222 +169 Total_Bad_Block 0x0032 100 100 --- Old_age Always - 164 +171 Program_Fail_Count 0x0032 100 100 --- Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 --- Old_age Always - 0 +173 Avg_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 109 +174 Unexpect_Power_Loss_Ct 0x0032 100 100 --- Old_age Always - 363 +187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 +194 Temperature_Celsius 0x0022 081 048 --- Old_age Always - 19 (Min/Max 14/48) +212 SATA_PHY_Error 0x0032 100 100 --- Old_age Always - 0 +230 Perc_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 0 0 831 +232 Perc_Avail_Resrvd_Space 0x0033 100 100 004 Pre-fail Always - 100 +233 Total_NAND_Writes_GiB 0x0032 100 100 --- Old_age Always - 13890 +241 Total_Writes_GiB 0x0030 253 253 --- Old_age Offline - 7098 +242 Total_Reads_GiB 0x0030 253 253 --- Old_age Offline - 10114 +243 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/SSD/SanDisk/SSD G5/SSD G5 BICS4/6E052E2FB189 b/SSD/SanDisk/SSD G5/SSD G5 BICS4/6E052E2FB189 new file mode 100644 index 000000000..7c038b24c --- /dev/null +++ b/SSD/SanDisk/SSD G5/SSD G5 BICS4/6E052E2FB189 @@ -0,0 +1,144 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SanDisk SSD G5 BICS4 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: 415000WD +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Jul 22 21:53:19 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 4 + 12 Power_Cycle_Count -O--CK 100 100 --- - 36 +165 Unknown_Attribute -O--CK 100 100 --- - 1441807 +166 Unknown_Attribute -O--CK 100 100 --- - 0 +167 Unknown_Attribute -O--CK 100 100 --- - 104 +168 Unknown_Attribute -O--CK 100 100 --- - 1 +169 Unknown_Attribute -O--CK 100 100 --- - 273 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Unknown_Attribute -O--CK 100 100 --- - 0 +172 Unknown_Attribute -O--CK 100 100 --- - 0 +173 Unknown_Attribute -O--CK 100 100 --- - 0 +174 Unknown_Attribute -O--CK 100 100 --- - 9 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 054 050 --- - 46 (Min/Max 27/50) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Unknown_SSD_Attribute -O--CK 001 001 --- - 12884901891 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 Media_Wearout_Indicator -O--CK 100 100 --- - 80 +234 Unknown_Attribute -O--CK 100 100 --- - 114 +241 Total_LBAs_Written ----CK 253 253 --- - 81 +242 Total_LBAs_Read ----CK 253 253 --- - 8 +244 Unknown_Attribute -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 1797 Current Device Internal Status Data log +0x25 GPL R/O 1797 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 36 --- Lifetime Power-On Resets +0x01 0x010 4 4 --- Power-on Hours +0x01 0x018 6 170951876 --- Logical Sectors Written +0x01 0x020 6 629645 --- Number of Write Commands +0x01 0x028 6 17837398 --- Logical Sectors Read +0x01 0x030 6 140122 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/SanDisk/SSD PLUS/SSD PLUS 1000GB/0450D22DBB57 b/SSD/SanDisk/SSD PLUS/SSD PLUS 1000GB/0450D22DBB57 new file mode 100644 index 000000000..ac2af9087 --- /dev/null +++ b/SSD/SanDisk/SSD PLUS/SSD PLUS 1000GB/0450D22DBB57 @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SSD PLUS 1000GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UH5100RL +User Capacity: 1,000,207,286,272 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 6 13:03:20 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 182) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 891 + 12 Power_Cycle_Count -O--CK 100 100 000 - 270 +165 Total_Write/Erase_Count -O--CK 100 100 000 - 730 +166 Min_W/E_Cycle -O--CK 100 100 --- - 4 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 0 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 9 +169 Total_Bad_Block -O--CK 100 100 --- - 1393 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 000 - 4 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 71 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 055 066 000 - 45 (Min/Max 0/66) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 000 - 520 80 520 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 005 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 3348 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 000 - 11413 +241 Total_Writes_GiB ----CK 100 100 000 - 4125 +242 Total_Reads_GiB ----CK 100 100 000 - 1522 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa4 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 270 --- Lifetime Power-On Resets +0x01 0x010 4 891 --- Power-on Hours +0x01 0x018 6 8651611743 --- Logical Sectors Written +0x01 0x028 6 3193315189 --- Logical Sectors Read +0x01 0x038 6 892 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 75 --- Highest Temperature +0x05 0x028 1 9 --- Lowest Temperature +0x05 0x030 1 23 --- Highest Average Short Term Temperature +0x05 0x038 1 23 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 5 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/15403C3CA6C4 b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/15403C3CA6C4 new file mode 100644 index 000000000..dab3d8478 --- /dev/null +++ b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/15403C3CA6C4 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SSD PLUS 120GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UE4500RL +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 7 10:50:28 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9633 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 +165 Total_Write/Erase_Count -O--CK 100 100 000 - 6321 +166 Min_W/E_Cycle -O--CK 100 100 --- - 16 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 0 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 34 +169 Total_Bad_Block -O--CK 100 100 --- - 82 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 000 - 16 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 19 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 065 045 000 - 35 (Min/Max 12/45) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 000 - 4614 788 4614 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 005 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 1936 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 000 - 35161 +241 Total_Writes_GiB ----CK 100 100 000 - 10944 +242 Total_Reads_GiB ----CK 100 100 000 - 4161 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 9633 --- Power-on Hours +0x01 0x018 6 22951734154 --- Logical Sectors Written +0x01 0x028 6 8728090661 --- Logical Sectors Read +0x01 0x038 6 9633 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 19 --- Lowest Temperature +0x05 0x030 1 40 --- Highest Average Short Term Temperature +0x05 0x038 1 40 --- Lowest Average Short Term Temperature +0x05 0x040 1 31 --- Highest Average Long Term Temperature +0x05 0x048 1 31 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/179190B553A6 b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/179190B553A6 new file mode 100644 index 000000000..2f3e04920 --- /dev/null +++ b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/179190B553A6 @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SSD PLUS 120GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UE4500RL +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 7 10:53:51 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 965 + 12 Power_Cycle_Count -O--CK 100 100 000 - 104 +165 Total_Write/Erase_Count -O--CK 100 100 000 - 543 +166 Min_W/E_Cycle -O--CK 100 100 --- - 7 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 0 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 13 +169 Total_Bad_Block -O--CK 100 100 --- - 58 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 000 - 7 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 27 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 069 048 000 - 31 (Min/Max 15/48) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 000 - 311 296 311 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 005 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 807 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 000 - 3023 +241 Total_Writes_GiB ----CK 100 100 000 - 1109 +242 Total_Reads_GiB ----CK 100 100 000 - 1149 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 104 --- Lifetime Power-On Resets +0x01 0x010 4 965 --- Power-on Hours +0x01 0x018 6 2327452983 --- Logical Sectors Written +0x01 0x028 6 2410806008 --- Logical Sectors Read +0x01 0x038 6 965 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 47 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 41 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/24CC567EACA2 b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/24CC567EACA2 new file mode 100644 index 000000000..0dba0469f --- /dev/null +++ b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/24CC567EACA2 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SSD PLUS 120GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UE4500RL +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 7 10:58:19 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9923 + 12 Power_Cycle_Count -O--CK 100 100 000 - 18 +165 Total_Write/Erase_Count -O--CK 100 100 000 - 7759 +166 Min_W/E_Cycle -O--CK 100 100 --- - 11 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 0 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 29 +169 Total_Bad_Block -O--CK 100 100 --- - 121 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 000 - 11 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 14 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 063 051 000 - 37 (Min/Max 17/51) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 000 - 5648 532 5648 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 005 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 1243 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 000 - 43160 +241 Total_Writes_GiB ----CK 100 100 000 - 11965 +242 Total_Reads_GiB ----CK 100 100 000 - 5685 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 9923 --- Power-on Hours +0x01 0x018 6 25094126591 --- Logical Sectors Written +0x01 0x028 6 11923416995 --- Logical Sectors Read +0x01 0x038 6 9923 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 36 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 25 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 43 --- Lowest Average Short Term Temperature +0x05 0x040 1 36 --- Highest Average Long Term Temperature +0x05 0x048 1 36 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/3FE2165E2418 b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/3FE2165E2418 new file mode 100644 index 000000000..a7d3a4496 --- /dev/null +++ b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/3FE2165E2418 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SSD PLUS 120GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UE4500RL +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 7 10:58:30 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9446 + 12 Power_Cycle_Count -O--CK 100 100 000 - 24 +165 Total_Write/Erase_Count -O--CK 100 100 000 - 7281 +166 Min_W/E_Cycle -O--CK 100 100 --- - 10 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 0 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 28 +169 Total_Bad_Block -O--CK 100 100 --- - 91 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 000 - 10 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 18 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 060 053 000 - 40 (Min/Max 20/53) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 000 - 5200 512 5200 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 005 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 1115 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 000 - 40502 +241 Total_Writes_GiB ----CK 100 100 000 - 11177 +242 Total_Reads_GiB ----CK 100 100 000 - 6124 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 24 --- Lifetime Power-On Resets +0x01 0x010 4 9446 --- Power-on Hours +0x01 0x018 6 23439875387 --- Logical Sectors Written +0x01 0x028 6 12844528905 --- Logical Sectors Read +0x01 0x038 6 9446 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 28 --- Lowest Temperature +0x05 0x030 1 49 --- Highest Average Short Term Temperature +0x05 0x038 1 49 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 37 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/44FB211EE9FC b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/44FB211EE9FC new file mode 100644 index 000000000..b4c3abf4e --- /dev/null +++ b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/44FB211EE9FC @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SSD PLUS 120GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UE4500RL +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 7 10:58:30 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9446 + 12 Power_Cycle_Count -O--CK 100 100 000 - 24 +165 Total_Write/Erase_Count -O--CK 100 100 000 - 7277 +166 Min_W/E_Cycle -O--CK 100 100 --- - 9 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 0 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 27 +169 Total_Bad_Block -O--CK 100 100 --- - 89 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 000 - 9 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 18 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 061 053 000 - 39 (Min/Max 18/53) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 000 - 5199 336 5199 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 005 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 1119 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 000 - 40476 +241 Total_Writes_GiB ----CK 100 100 000 - 11176 +242 Total_Reads_GiB ----CK 100 100 000 - 6125 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 24 --- Lifetime Power-On Resets +0x01 0x010 4 9446 --- Power-on Hours +0x01 0x018 6 23439733326 --- Logical Sectors Written +0x01 0x028 6 12846011412 --- Logical Sectors Read +0x01 0x038 6 9447 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 39 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 53 --- Highest Temperature +0x05 0x028 1 27 --- Lowest Temperature +0x05 0x030 1 48 --- Highest Average Short Term Temperature +0x05 0x038 1 48 --- Lowest Average Short Term Temperature +0x05 0x040 1 37 --- Highest Average Long Term Temperature +0x05 0x048 1 37 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 7 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/7E9491C9E901 b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/7E9491C9E901 new file mode 100644 index 000000000..4c9d3c490 --- /dev/null +++ b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/7E9491C9E901 @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SSD PLUS 120GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UE4500RL +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 7 10:50:28 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9633 + 12 Power_Cycle_Count -O--CK 100 100 000 - 23 +165 Total_Write/Erase_Count -O--CK 100 100 000 - 6203 +166 Min_W/E_Cycle -O--CK 100 100 --- - 16 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 0 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 34 +169 Total_Bad_Block -O--CK 100 100 --- - 97 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 000 - 16 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 19 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 064 048 000 - 36 (Min/Max 13/48) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 000 - 4424 788 4424 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 005 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 1936 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 000 - 34510 +241 Total_Writes_GiB ----CK 100 100 000 - 10944 +242 Total_Reads_GiB ----CK 100 100 000 - 4130 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 23 --- Lifetime Power-On Resets +0x01 0x010 4 9633 --- Power-on Hours +0x01 0x018 6 22953260393 --- Logical Sectors Written +0x01 0x028 6 8662853187 --- Logical Sectors Read +0x01 0x038 6 9633 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 36 --- Current Temperature +0x05 0x010 1 36 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 20 --- Lowest Temperature +0x05 0x030 1 43 --- Highest Average Short Term Temperature +0x05 0x038 1 43 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 33 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 3 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 16 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/9304CC34F218 b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/9304CC34F218 new file mode 100644 index 000000000..2497acc1f --- /dev/null +++ b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/9304CC34F218 @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SSD PLUS 120GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UE4500RL +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 7 10:58:19 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 9923 + 12 Power_Cycle_Count -O--CK 100 100 000 - 18 +165 Total_Write/Erase_Count -O--CK 100 100 000 - 8007 +166 Min_W/E_Cycle -O--CK 100 100 --- - 11 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 0 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 30 +169 Total_Bad_Block -O--CK 100 100 --- - 65 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 000 - 11 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 14 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 065 049 000 - 35 (Min/Max 16/49) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 000 - 5719 532 5719 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 005 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 1247 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 000 - 44542 +241 Total_Writes_GiB ----CK 100 100 000 - 11967 +242 Total_Reads_GiB ----CK 100 100 000 - 5689 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 18 --- Lifetime Power-On Resets +0x01 0x010 4 9923 --- Power-on Hours +0x01 0x018 6 25098270758 --- Logical Sectors Written +0x01 0x028 6 11930771152 --- Logical Sectors Read +0x01 0x038 6 9923 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 33 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 42 --- Lowest Average Short Term Temperature +0x05 0x040 1 34 --- Highest Average Long Term Temperature +0x05 0x048 1 34 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 10 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/9C29907A7517 b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/9C29907A7517 new file mode 100644 index 000000000..6948e38bf --- /dev/null +++ b/SSD/SanDisk/SSD PLUS/SSD PLUS 120GB/9C29907A7517 @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SSD PLUS 120GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UE4500RL +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 7 10:53:51 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 981 + 12 Power_Cycle_Count -O--CK 100 100 000 - 151 +165 Total_Write/Erase_Count -O--CK 100 100 000 - 584 +166 Min_W/E_Cycle -O--CK 100 100 --- - 8 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 0 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 14 +169 Total_Bad_Block -O--CK 100 100 --- - 61 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 000 - 8 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 71 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 067 049 000 - 33 (Min/Max 18/49) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 000 - 322 316 322 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 005 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 894 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 000 - 3254 +241 Total_Writes_GiB ----CK 100 100 000 - 1180 +242 Total_Reads_GiB ----CK 100 100 000 - 1107 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 151 --- Lifetime Power-On Resets +0x01 0x010 4 981 --- Power-on Hours +0x01 0x018 6 2475133139 --- Logical Sectors Written +0x01 0x028 6 2323394900 --- Logical Sectors Read +0x01 0x038 6 981 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 33 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 29 --- Lowest Temperature +0x05 0x030 1 41 --- Highest Average Short Term Temperature +0x05 0x038 1 41 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/SanDisk/SSD PLUS/SSD PLUS 240GB/B7BE375DA826 b/SSD/SanDisk/SSD PLUS/SSD PLUS 240GB/B7BE375DA826 new file mode 100644 index 000000000..1ca7af86b --- /dev/null +++ b/SSD/SanDisk/SSD PLUS/SSD PLUS 240GB/B7BE375DA826 @@ -0,0 +1,187 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk SSD PLUS 240GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UF2204RL +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Aug 13 11:56:38 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 41) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 1 + 9 Power_On_Hours -O--CK 100 100 000 - 2045 + 12 Power_Cycle_Count -O--CK 100 100 000 - 829 +165 Total_Write/Erase_Count -O--CK 100 100 000 - 843 +166 Min_W/E_Cycle -O--CK 100 100 --- - 11 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 14 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 13 +169 Total_Bad_Block -O--CK 100 100 --- - 122 +170 Unknown_Attribute -O--CK 100 100 --- - 1 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 000 - 11 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 179 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 055 053 000 - 45 (Min/Max 12/53) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 000 - 552 532 552 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 005 - 98 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 2754 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 000 - 6718 +241 Total_Writes_GiB ----CK 100 100 000 - 2977 +242 Total_Reads_GiB ----CK 100 100 000 - 1069 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa4 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 4 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1914 - +# 2 Short offline Completed without error 00% 1914 - +# 3 Short offline Completed without error 00% 1907 - +# 4 Short offline Completed without error 00% 1906 - +# 5 Short offline Completed without error 00% 1567 - +# 6 Short offline Completed without error 00% 1562 - +# 7 Short offline Completed without error 00% 1555 - +# 8 Short offline Self-test routine in progress 30% 1555 - +# 9 Short offline Self-test routine in progress 30% 1555 - +#10 Short offline Self-test routine in progress 30% 1555 - +#11 Short offline Self-test routine in progress 40% 1555 - +#12 Short offline Completed without error 00% 1549 - +#13 Short offline Completed without error 00% 1537 - +#14 Short offline Completed without error 00% 1526 - +#15 Short offline Completed without error 00% 1346 - +#16 Short offline Completed without error 00% 1344 - +#17 Short offline Self-test routine in progress 90% 1344 - +#18 Short offline Completed without error 00% 1300 - +#19 Short offline Completed without error 00% 1189 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 829 --- Lifetime Power-On Resets +0x01 0x010 4 2045 --- Power-on Hours +0x01 0x018 6 6243375282 --- Logical Sectors Written +0x01 0x028 6 2242285025 --- Logical Sectors Read +0x01 0x038 6 2045 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 45 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 23 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 37 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/SanDisk/SSD SATA 5000/SSD SATA 5000 2.5/A18A76DA987B b/SSD/SanDisk/SSD SATA 5000/SSD SATA 5000 2.5/A18A76DA987B new file mode 100644 index 000000000..d48faa727 --- /dev/null +++ b/SSD/SanDisk/SSD SATA 5000/SSD SATA 5000 2.5/A18A76DA987B @@ -0,0 +1,116 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SanDisk SSD SATA 5000 2.5 +Serial Number: -- +Firmware Version: 1.13 +User Capacity: 15,804,137,472 bytes [15.8 GB] +Sector Size: 512 bytes logical/physical +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a +Local Time is: Thu Oct 29 10:09:13 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 60) seconds. +Offline data collection +capabilities: (0x13) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 016 - 0 + 2 Throughput_Performance ------ 100 100 040 - 0 + 3 Spin_Up_Time ------ 100 100 000 - 0 + 4 Start_Stop_Count ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 005 - 0 + 7 Seek_Error_Rate ------ 100 100 067 - 0 + 8 Seek_Time_Performance ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 0 + 10 Spin_Retry_Count ------ 100 100 000 - 0 + 11 Calibration_Retry_Count ------ 100 100 010 - 0 + 12 Power_Cycle_Count ------ 100 100 000 - 0 + 13 Read_Soft_Error_Rate ------ 100 100 000 - 0 +191 G-Sense_Error_Rate ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 0 +194 Temperature_Celsius ------ 100 100 000 - 0 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 100 000 - 0 +201 Soft_Read_Error_Rate ------ 100 100 000 - 0 +223 Load_Retry_Count ------ 100 100 000 - 0 +225 Load_Cycle_Count ------ 100 100 000 - 0 +232 Available_Reservd_Space ------ 073 073 004 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: scsi error aborted command + +General Purpose Log Directory Version 0 +Address Access R/W Size Description +0x00 GPL R/O 1 Log Directory +0x9a GPL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 0 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/SanDisk/SSD SATA 5000/SSD SATA 5000 2.5/BB6708262E72 b/SSD/SanDisk/SSD SATA 5000/SSD SATA 5000 2.5/BB6708262E72 new file mode 100644 index 000000000..2a3ebd0d0 --- /dev/null +++ b/SSD/SanDisk/SSD SATA 5000/SSD SATA 5000 2.5/BB6708262E72 @@ -0,0 +1,114 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p1 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SanDisk SSD SATA 5000 2.5 +Serial Number: -- +Firmware Version: 1.13 +User Capacity: 15,804,137,472 bytes [15.8 GB] +Sector Size: 512 bytes logical/physical +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a +Local Time is: Thu Oct 29 10:09:15 2020 MDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 60) seconds. +Offline data collection +capabilities: (0x13) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 016 - 0 + 2 Throughput_Performance ------ 100 100 040 - 0 + 3 Spin_Up_Time ------ 100 100 000 - 0 + 4 Start_Stop_Count ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 005 - 0 + 7 Seek_Error_Rate ------ 100 100 067 - 0 + 8 Seek_Time_Performance ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 0 + 10 Spin_Retry_Count ------ 100 100 000 - 0 + 11 Calibration_Retry_Count ------ 100 100 010 - 0 + 12 Power_Cycle_Count ------ 100 100 000 - 0 + 13 Read_Soft_Error_Rate ------ 100 100 000 - 0 +191 G-Sense_Error_Rate ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 0 +194 Temperature_Celsius ------ 100 100 000 - 0 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 +200 Multi_Zone_Error_Rate ------ 100 100 000 - 0 +201 Soft_Read_Error_Rate ------ 100 100 000 - 0 +223 Load_Retry_Count ------ 100 100 000 - 0 +225 Load_Cycle_Count ------ 100 100 000 - 0 +232 Available_Reservd_Space ------ 071 071 004 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +Read SMART Log Directory failed: scsi error aborted command + +General Purpose Log Directory Version 0 +Address Access R/W Size Description +0x00 GPL R/O 1 Log Directory +0x9a GPL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log (GP Log 0x03) not supported + +SMART Error Log Version: 0 +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/SanDisk/SSD U110/SSD U110 16GB/0A59E9B7CCCD b/SSD/SanDisk/SSD U110/SSD U110 16GB/0A59E9B7CCCD new file mode 100644 index 000000000..f93534491 --- /dev/null +++ b/SSD/SanDisk/SSD U110/SSD U110 16GB/0A59E9B7CCCD @@ -0,0 +1,159 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SanDisk based SSDs +Device Model: SanDisk SSD U110 16GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: U21B001 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Mon Oct 19 16:41:07 2020 WIB +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 + 9 Power_On_Hours -O---- 100 100 000 - 1120 + 12 Power_Cycle_Count -O---- 100 100 000 - 3920 +171 Program_Fail_Count -O---- 100 100 000 - 0 +172 Erase_Fail_Count -O---- 100 100 000 - 0 +173 Avg_Write/Erase_Count -O---- 100 100 000 - 144 +174 Unexpect_Power_Loss_Ct -O---- 100 100 000 - 208 +187 Reported_Uncorrect -O---- 100 100 000 - 0 +230 Perc_Write/Erase_Count -O---- 100 100 000 - 480 +232 Perc_Avail_Resrvd_Space PO---- 100 100 005 - 0 +234 Perc_Write/Erase_Ct_BC -O---- 100 100 000 - 414 +241 Total_LBAs_Written -O---- 100 100 000 - 3023648971 +242 Total_LBAs_Read -O---- 100 100 000 - 2115901078 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x03 GPL,SL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa6-0xa7 GPL,SL VS 255 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 65535 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 18446744073709551615 18446744073709551615 Not_testing + 2 18446744073709551615 18446744073709551615 Not_testing + 3 18446744073709551615 18446744073709551615 Not_testing + 4 18446744073709551615 18446744073709551615 Not_testing + 5 18446744073709551615 18446744073709551615 Not_testing +65535 18446744073709551615 65534 Read_scanning was never started +Selective self-test flags (0xffff): + Currently read-scanning the remainder of the disk. +If Selective self-test is pending on power-up, resume after 65535 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/SanDisk/SSD U110/SSD U110 16GB/1F52FCED86B7 b/SSD/SanDisk/SSD U110/SSD U110 16GB/1F52FCED86B7 new file mode 100644 index 000000000..30731c46b --- /dev/null +++ b/SSD/SanDisk/SSD U110/SSD U110 16GB/1F52FCED86B7 @@ -0,0 +1,100 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SanDisk based SSDs +Device Model: SanDisk SSD U110 16GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: U21B001 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 06:13:04 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 16933 + 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 6609 +171 Program_Fail_Count 0x0002 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0002 100 100 000 Old_age Always - 0 +173 Avg_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 1999 +174 Unexpect_Power_Loss_Ct 0x0002 100 100 000 Old_age Always - 258 +187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 0 +230 Perc_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 6663 +232 Perc_Avail_Resrvd_Space 0x0003 100 100 005 Pre-fail Always - 0 +234 Perc_Write/Erase_Ct_BC 0x0002 100 100 000 Old_age Always - 5029 +241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always - 9759497398 +242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always - 2988911792 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 14707 - +# 2 Short offline Completed without error 00% 13547 - +# 3 Short offline Completed without error 00% 12933 - +# 4 Short offline Completed without error 00% 12305 - +# 5 Short offline Completed without error 00% 10164 - +# 6 Short offline Completed without error 00% 9871 - +# 7 Short offline Completed without error 00% 6532 - +# 8 Short offline Completed without error 00% 730 - +# 9 Short offline Completed without error 00% 3 - + +SMART Selective self-test log data structure revision number 65535 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 18446744073709551615 18446744073709551615 Not_testing + 2 18446744073709551615 18446744073709551615 Not_testing + 3 18446744073709551615 18446744073709551615 Not_testing + 4 18446744073709551615 18446744073709551615 Not_testing + 5 18446744073709551615 18446744073709551615 Not_testing +65535 18446744073709551615 65534 Read_scanning was never started +Selective self-test flags (0xffff): + Currently read-scanning the remainder of the disk. +If Selective self-test is pending on power-up, resume after 65535 minute delay. + + + diff --git a/SSD/SanDisk/SSD U110/SSD U110 16GB/BF09A8790181 b/SSD/SanDisk/SSD U110/SSD U110 16GB/BF09A8790181 new file mode 100644 index 000000000..6997117c5 --- /dev/null +++ b/SSD/SanDisk/SSD U110/SSD U110 16GB/BF09A8790181 @@ -0,0 +1,91 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SanDisk based SSDs +Device Model: SanDisk SSD U110 16GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: U21B001 +User Capacity: 16,013,942,784 bytes [16.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 12:13:38 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 3) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 39397 + 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 602 +171 Program_Fail_Count 0x0002 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0002 100 100 000 Old_age Always - 0 +173 Avg_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 125 +174 Unexpect_Power_Loss_Ct 0x0002 100 100 000 Old_age Always - 256 +187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 0 +230 Perc_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 416 +232 Perc_Avail_Resrvd_Space 0x0003 100 100 005 Pre-fail Always - 0 +234 Perc_Write/Erase_Ct_BC 0x0002 100 100 000 Old_age Always - 30 +241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always - 313024573 +242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always - 183405029 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 65535 +Note: revision number not 1 implies that no selective self-test has ever been run + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 18446744073709551615 18446744073709551615 Not_testing + 2 18446744073709551615 18446744073709551615 Not_testing + 3 18446744073709551615 18446744073709551615 Not_testing + 4 18446744073709551615 18446744073709551615 Not_testing + 5 18446744073709551615 18446744073709551615 Not_testing +65535 18446744073709551615 65534 Read_scanning was never started +Selective self-test flags (0xffff): + Currently read-scanning the remainder of the disk. +If Selective self-test is pending on power-up, resume after 65535 minute delay. + + + diff --git a/SSD/SanDisk/SSD i100/SSD i100 64GB/405C1B9F0413 b/SSD/SanDisk/SSD i100/SSD i100 64GB/405C1B9F0413 new file mode 100644 index 000000000..6f585a0d4 --- /dev/null +++ b/SSD/SanDisk/SSD i100/SSD i100 64GB/405C1B9F0413 @@ -0,0 +1,155 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: SanDisk based SSDs +Device Model: SanDisk SSD i100 64GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: 11.56.00 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 1.8 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Aug 22 01:17:41 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x51) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 12) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 + 9 Power_On_Hours -O---- 100 100 000 - 507 + 12 Power_Cycle_Count -O---- 100 100 000 - 1153 +171 Program_Fail_Count -O---- 100 100 000 - 0 +172 Erase_Fail_Count -O---- 100 100 000 - 0 +173 Avg_Write/Erase_Count -O---- 100 100 000 - 11 +174 Unexpect_Power_Loss_Ct -O---- 100 100 000 - 40 +187 Reported_Uncorrect -O---- 100 100 000 - 0 +230 Perc_Write/Erase_Count -O---- 100 100 000 - 36 +232 Perc_Avail_Resrvd_Space PO---- 100 100 005 - 0 +234 Perc_Write/Erase_Ct_BC -O---- 100 100 000 - 173 +241 Total_LBAs_Written -O---- 100 100 000 - 5354338168 +242 Total_LBAs_Read -O---- 100 100 000 - 4802404968 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x03 GPL,SL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x11 GPL,SL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log (GP Log 0x07) not supported + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 62 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 74 --- Highest Temperature +0x05 0x028 1 30 --- Lowest Temperature +0x05 0x030 1 47 --- Highest Average Short Term Temperature +0x05 0x038 1 47 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 20 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/SanDisk/Ultra II/Ultra II 240GB/AE68FBF25DBE b/SSD/SanDisk/Ultra II/Ultra II 240GB/AE68FBF25DBE new file mode 100644 index 000000000..c2a601eb4 --- /dev/null +++ b/SSD/SanDisk/Ultra II/Ultra II 240GB/AE68FBF25DBE @@ -0,0 +1,144 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk Ultra II 240GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X41100RL +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Oct 28 17:33:30 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 1403 + 12 Power_Cycle_Count -O--CK 100 100 --- - 734 +165 Total_Write/Erase_Count -O--CK 100 100 --- - 3604523 +166 Min_W/E_Cycle -O--CK 100 100 --- - 0 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 52 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 1 +169 Total_Bad_Block -O--CK 100 100 --- - 555 +170 Unknown_Marvell_Attr -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 --- - 0 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 191 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 071 063 --- - 29 (Min/Max 15/63) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 12 0 12 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 206 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 --- - 448 +241 Total_Writes_GiB ----CK 253 253 --- - 385 +242 Total_Reads_GiB ----CK 253 253 --- - 169 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 734 --- Lifetime Power-On Resets +0x01 0x018 6 1353681420 --- Logical Sectors Written +0x01 0x020 6 2555960 --- Number of Write Commands +0x01 0x028 6 592539638 --- Logical Sectors Read +0x01 0x030 6 470422 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 15 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/Ultra II/Ultra II 480GB/0DFE6961E0D7 b/SSD/SanDisk/Ultra II/Ultra II 480GB/0DFE6961E0D7 new file mode 100644 index 000000000..51ea74bfa --- /dev/null +++ b/SSD/SanDisk/Ultra II/Ultra II 480GB/0DFE6961E0D7 @@ -0,0 +1,149 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Marvell based SanDisk SSDs +Device Model: SanDisk Ultra II 480GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X41320RL +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 7 20:23:43 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 13628 + 12 Power_Cycle_Count -O--CK 100 100 --- - 2495 +165 Total_Write/Erase_Count -O--CK 100 100 --- - 2413980879561 +166 Min_W/E_Cycle -O--CK 100 100 --- - 7 +167 Min_Bad_Block/Die -O--CK 100 100 --- - 20 +168 Maximum_Erase_Cycle -O--CK 100 100 --- - 60 +169 Total_Bad_Block -O--CK 100 100 --- - 422 +170 Unknown_Attribute -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Avg_Write/Erase_Count -O--CK 100 100 --- - 34 +174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 411 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 1 +194 Temperature_Celsius -O---K 063 064 --- - 37 (Min/Max 18/64) +199 SATA_CRC_Error -O--CK 100 100 --- - 0 +230 Perc_Write/Erase_Count -O--CK 100 100 --- - 1880 1109 1880 +232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 +233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 16186 +234 Perc_Write/Erase_Ct_BC -O--CK 100 100 --- - 56535 +241 Total_Writes_GiB ----CK 253 253 --- - 43667 +242 Total_Reads_GiB ----CK 253 253 --- - 69542 +244 Thermal_Throttle -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 11907 - +# 2 Short offline Completed without error 00% 11363 - +# 3 Extended offline Completed without error 00% 9103 - +# 4 Short offline Completed without error 00% 9103 - +# 5 Short offline Completed without error 00% 8587 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2495 --- Lifetime Power-On Resets +0x01 0x018 6 91576945671 --- Logical Sectors Written +0x01 0x020 6 1157737695 --- Number of Write Commands +0x01 0x028 6 145841219692 --- Logical Sectors Read +0x01 0x030 6 2001180578 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/SanDisk/X400/X400 M.2 2280 512GB/58E7285C01FA b/SSD/SanDisk/X400/X400 M.2 2280 512GB/58E7285C01FA new file mode 100644 index 000000000..1a6cd0a9f --- /dev/null +++ b/SSD/SanDisk/X400/X400 M.2 2280 512GB/58E7285C01FA @@ -0,0 +1,88 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: SanDisk X400 M.2 2280 512GB +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X4130012 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 22 15:33:13 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 4908 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 831 +175 Program_Fail_Count_Chip 0x0032 100 100 --- Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 --- Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 --- Old_age Always - 3 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 --- Old_age Always - 0 +179 Used_Rsvd_Blk_Cnt_Tot 0x0032 100 100 --- Old_age Always - 0 +180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 004 Pre-fail Always - 20488 +181 Program_Fail_Cnt_Total 0x0032 100 100 --- Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 --- Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 +194 Temperature_Celsius 0x0022 051 067 --- Old_age Always - 49 (Min/Max 13/67) +195 Hardware_ECC_Recovered 0x0032 100 100 --- Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 +230 Unknown_SSD_Attribute 0x0032 100 100 --- Old_age Always - 2456724046396 +238 Unknown_Attribute 0x0032 098 100 --- Old_age Always - 16339888 +241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 17222989832 +242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 5302941468 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 1 - + +Selective Self-tests/Logging not supported + diff --git a/SSD/Seagate/ST100/ST100FN0021/6881E706597F b/SSD/Seagate/ST100/ST100FN0021/6881E706597F new file mode 100644 index 000000000..f0f5daa25 --- /dev/null +++ b/SSD/Seagate/ST100/ST100FN0021/6881E706597F @@ -0,0 +1,315 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ST100FN0021 +Serial Number: -- +LU WWN Device Id: 5 000c50 ... +Firmware Version: B550 +User Capacity: 100,030,242,816 bytes [100 GB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Aug 6 09:54:58 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +Read SMART Thresholds failed: Input/output error + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 48) seconds. +Offline data collection +capabilities: (0x19) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 8) minutes. + +SMART Attributes Data Structure revision number: 0 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate POSR-- 166 134 --- - 0 + 5 Reallocated_Sector_Ct PO--CK 100 100 --- - 1 + 9 Power_On_Hours -O--CK 052 052 --- - 42763 + 12 Power_Cycle_Count -O--CK 100 100 --- - 203 +171 Unknown_Attribute -O--CK 100 100 --- - 0 +172 Unknown_Attribute -O--CK 100 100 --- - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 --- - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 037 000 --- - 37 (Min/Max 0/41) +201 Unknown_SSD_Attribute -O--CK 100 100 --- - 0 +204 Soft_ECC_Correction -O--CK 100 100 --- - 0 +231 Temperature_Celsius PO--C- 100 100 --- - 1 +234 Unknown_Attribute -O--CK 100 100 --- - 9024 +241 Total_LBAs_Written -O--CK 100 100 --- - 1553 +242 Total_LBAs_Read -O--CK 100 100 --- - 40 +250 Read_Error_Retry_Rate -O--CK 100 100 --- - 965 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x07 GPL,SL R/O 2 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa8 GPL VS 521 Device vendor specific log +0xa8 SL VS 255 Device vendor specific log +0xb7 GPL,SL VS 4 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (5 sectors) +Device Error Count: 685 (device log contains only the most recent 20 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 685 [4] occurred at disk power-on lifetime: 42763 hours (1781 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 01 00 00 00 00 00 00 e0 08 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 00 01 00 00 00 c2 4f 01 40 08 8d+02:22:27.574 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 00 d0 00 01 00 00 00 c2 4f 00 40 08 8d+02:22:27.574 SMART READ DATA + ec 00 00 00 01 00 00 00 00 00 00 40 08 8d+02:22:27.564 IDENTIFY DEVICE + 60 00 b0 00 f8 00 00 02 67 14 88 40 08 8d+02:22:27.554 READ FPDMA QUEUED + 60 00 88 00 f0 00 00 02 67 13 78 40 08 8d+02:22:27.554 READ FPDMA QUEUED + +Error 684 [3] occurred at disk power-on lifetime: 42763 hours (1781 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 c2 4f 00 e0 08 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 00 01 00 00 00 c2 4f 01 40 08 8d+02:21:26.154 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 00 d0 00 01 00 00 00 c2 4f 00 40 08 8d+02:21:26.154 SMART READ DATA + b0 00 da 00 00 00 00 00 c2 4f 00 40 08 8d+02:21:26.154 SMART RETURN STATUS + b0 00 d8 00 00 00 00 00 c2 4f 01 40 08 8d+02:21:26.154 SMART ENABLE OPERATIONS + ec 00 00 00 01 00 00 00 00 00 00 40 08 8d+02:21:26.154 IDENTIFY DEVICE + +Error 683 [2] occurred at disk power-on lifetime: 42763 hours (1781 days + 19 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 10 00 00 00 00 ff ff e0 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d2 00 f1 00 00 00 c2 4f ff e0 00 8d+02:19:49.614 SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE + b0 00 d8 00 00 00 00 00 c2 4f ff e0 00 8d+02:19:49.614 SMART ENABLE OPERATIONS + c6 00 ff 00 10 00 00 00 00 ff ff e0 00 8d+02:19:49.464 SET MULTIPLE MODE + ec 00 00 00 00 00 00 00 00 00 00 a0 00 8d+02:19:49.414 IDENTIFY DEVICE + 00 00 00 00 00 00 00 00 00 00 00 a0 00 8d+02:19:49.404 NOP [Abort queued commands] + +Error 682 [1] occurred at disk power-on lifetime: 41926 hours (1746 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 c2 4f 00 e0 08 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 00 01 00 00 00 c2 4f 01 40 08 22d+22:50:58.740 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 00 d0 00 01 00 00 00 c2 4f 00 40 08 22d+22:50:58.730 SMART READ DATA + b0 00 da 00 00 00 00 00 c2 4f 00 40 08 22d+22:50:58.730 SMART RETURN STATUS + b0 00 d8 00 00 00 00 00 c2 4f 01 40 08 22d+22:50:58.730 SMART ENABLE OPERATIONS + ea 00 00 00 00 00 00 00 00 00 00 40 08 22d+22:50:58.730 FLUSH CACHE EXT + +Error 681 [0] occurred at disk power-on lifetime: 41926 hours (1746 days + 22 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 10 00 00 00 00 ff ff e0 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d2 00 f1 00 00 00 c2 4f ff e0 00 22d+22:49:21.990 SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE + b0 00 d8 00 00 00 00 00 c2 4f ff e0 00 22d+22:49:21.990 SMART ENABLE OPERATIONS + c6 00 ff 00 10 00 00 00 00 ff ff e0 00 22d+22:49:21.840 SET MULTIPLE MODE + ec 00 00 00 00 00 00 00 00 00 00 a0 00 22d+22:49:21.790 IDENTIFY DEVICE + 00 00 00 00 00 00 00 00 00 00 00 a0 00 22d+22:49:21.780 NOP [Abort queued commands] + +Error 680 [19] occurred at disk power-on lifetime: 41375 hours (1723 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 00 00 00 00 c2 4f 00 e0 08 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d1 00 01 00 00 00 c2 4f 01 40 08 00:02:00.930 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] + b0 00 d0 00 01 00 00 00 c2 4f 00 40 08 00:02:00.930 SMART READ DATA + b0 00 da 00 00 00 00 00 c2 4f 00 40 08 00:02:00.930 SMART RETURN STATUS + b0 00 d8 00 00 00 00 00 c2 4f 01 40 08 00:02:00.930 SMART ENABLE OPERATIONS + ec 00 00 00 01 00 00 00 00 00 00 40 08 00:02:00.920 IDENTIFY DEVICE + +Error 679 [18] occurred at disk power-on lifetime: 41375 hours (1723 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 10 00 00 00 00 ff ff e0 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d2 00 f1 00 00 00 c2 4f ff e0 00 00:00:24.690 SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE + b0 00 d8 00 00 00 00 00 c2 4f ff e0 00 00:00:24.690 SMART ENABLE OPERATIONS + c6 00 ff 00 10 00 00 00 00 ff ff e0 00 00:00:24.540 SET MULTIPLE MODE + ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:24.480 IDENTIFY DEVICE + 00 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:24.480 NOP [Abort queued commands] + +Error 678 [17] occurred at disk power-on lifetime: 41375 hours (1723 days + 23 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 04 -- 51 00 10 00 00 00 00 ff ff e0 00 Error: ABRT + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + b0 00 d2 00 f1 00 00 00 c2 4f ff e0 00 00:00:24.270 SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE + b0 00 d8 00 00 00 00 00 c2 4f ff e0 00 00:00:24.270 SMART ENABLE OPERATIONS + c6 00 ff 00 10 00 00 00 00 ff ff e0 00 00:00:24.120 SET MULTIPLE MODE + ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:24.060 IDENTIFY DEVICE + 00 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:24.050 NOP [Abort queued commands] + +SMART Extended Self-test Log Version: 1 (2 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 35888 - +# 2 Short offline Completed without error 00% 4880 - +# 3 Short offline Completed without error 00% 4788 - +# 4 Short offline Completed without error 00% 4785 - +# 5 Short offline Completed without error 00% 4782 - +# 6 Short offline Completed without error 00% 4779 - +# 7 Short offline Completed without error 00% 4776 - +# 8 Short offline Completed without error 00% 4773 - +# 9 Short offline Completed without error 00% 4770 - +#10 Short offline Completed without error 00% 4767 - +#11 Short offline Completed without error 00% 4764 - +#12 Short offline Completed without error 00% 4761 - +#13 Short offline Completed without error 00% 4758 - +#14 Short offline Completed without error 00% 4755 - +#15 Short offline Completed without error 00% 4752 - +#16 Short offline Completed without error 00% 4749 - +#17 Short offline Completed without error 00% 4746 - +#18 Short offline Completed without error 00% 4743 - +#19 Short offline Completed without error 00% 4740 - +#20 Short offline Completed without error 00% 4737 - +#21 Short offline Completed without error 00% 4734 - +#22 Short offline Completed without error 00% 4731 - +#23 Short offline Completed without error 00% 4728 - +#24 Short offline Completed without error 00% 4725 - +#25 Short offline Completed without error 00% 4722 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 203 --- Lifetime Power-On Resets + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 13 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Team/T253/T253X1240G/C9987957EDA1 b/SSD/Team/T253/T253X1240G/C9987957EDA1 new file mode 100644 index 000000000..ba23cb326 --- /dev/null +++ b/SSD/Team/T253/T253X1240G/C9987957EDA1 @@ -0,0 +1,151 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TEAM T253X1240G +Serial Number: -- +Firmware Version: R0831B0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Oct 8 06:22:27 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 104 + 12 Power_Cycle_Count -O--CK 100 100 050 - 168 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 12 +164 Unknown_Attribute -O--CK 100 100 050 - 7454 +165 Unknown_Attribute -O--CK 100 100 050 - 17 +166 Unknown_Attribute -O--CK 100 100 050 - 7 +167 Unknown_Attribute -O--CK 100 100 050 - 13 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 70 +194 Temperature_Celsius -O---K 100 100 050 - 0 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 7669 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 27752 +242 Total_LBAs_Read ----CK 100 100 050 - 18575 +245 Unknown_Attribute -O--CK 100 100 050 - 27857 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Aborted by host 40% 94 - +# 2 Short offline Completed without error 00% 94 - +# 3 Short offline Completed without error 00% 94 - +# 4 Short offline Completed without error 00% 94 - +# 5 Short offline Aborted by host 90% 92 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 168 --- Lifetime Power-On Resets +0x01 0x010 4 104 --- Power-on Hours +0x01 0x018 6 1818780755 --- Logical Sectors Written +0x01 0x020 6 7988 --- Number of Write Commands +0x01 0x028 6 1217390865 --- Logical Sectors Read +0x01 0x030 6 10737 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Toshiba/THNSFJ256/THNSFJ256GCSU/29F33C1182BB b/SSD/Toshiba/THNSFJ256/THNSFJ256GCSU/29F33C1182BB new file mode 100644 index 000000000..6023e723f --- /dev/null +++ b/SSD/Toshiba/THNSFJ256/THNSFJ256GCSU/29F33C1182BB @@ -0,0 +1,204 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba HG6 Series SSD +Device Model: TOSHIBA THNSFJ256GCSU +Serial Number: -- +LU WWN Device Id: 5 00080d ... +Firmware Version: JULA1102 +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 7 16:16:39 2020 -05 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 8527 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 1091 +167 SSD_Protect_Mode -O---K 100 100 000 - 0 +168 SATA_PHY_Error_Count -O--C- 100 100 000 - 0 +169 Bad_Block_Count PO--C- 100 100 010 - 100 +170 Unknown_Attribute PO--C- 100 100 010 - 0 +173 Erase_Count -O--C- 193 193 000 - 0 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 81 +194 Temperature_Celsius -O---K 065 060 000 - 35 (Min/Max 17/40) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xdf GPL,SL VS 1 Device vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 3 (0x0003) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 21/35 Celsius +Lifetime Min/Max Temperature: 17/40 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 04 00 01 01 00 05 05 00 00 00 00 00 00 00 +00 02 00 00 d9 6d d4 01 04 04 00 00 00 00 00 06 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/40 Celsius +Min/Max Temperature Limit: 0/80 Celsius +Temperature History Size (Index): 128 (64) + +SCT Error Recovery Control: + Read: 600 (60.0 seconds) + Write: 600 (60.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1091 --- Lifetime Power-On Resets +0x01 0x018 6 9349471861 --- Logical Sectors Written +0x01 0x020 6 200574182 --- Number of Write Commands +0x01 0x028 6 6525437923 --- Logical Sectors Read +0x01 0x030 6 225096488 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 31 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 38 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x05 0x030 1 35 --- Highest Average Short Term Temperature +0x05 0x038 1 25 --- Lowest Average Short Term Temperature +0x05 0x040 1 33 --- Highest Average Long Term Temperature +0x05 0x048 1 26 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 40 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4122 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 7 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 10 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Toshiba/THNSNC128/THNSNC128GBSJ/51FE645EF10E b/SSD/Toshiba/THNSNC128/THNSNC128GBSJ/51FE645EF10E new file mode 100644 index 000000000..449269007 --- /dev/null +++ b/SSD/Toshiba/THNSNC128/THNSNC128GBSJ/51FE645EF10E @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA THNSNC128GBSJ +Serial Number: -- +Firmware Version: CJPA0203 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Wed Sep 2 13:56:20 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 12) minutes. +SCT capabilities: (0x0039) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 099 099 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 19826 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 6230 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 100 100 010 - 627160253738 +170 Unknown_Attribute PO--C- 100 100 010 - 68735991890 +173 Unknown_Attribute -O--C- 100 100 000 - 38676660392 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 287 +194 Temperature_Celsius -O---K 071 040 000 - 29 (Min/Max 3/60) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 4 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 29 Celsius +Power Cycle Min/Max Temperature: 21/29 Celsius +Lifetime Min/Max Temperature: 3/60 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 04 00 01 01 00 05 05 00 00 00 00 00 00 00 +00 02 02 00 5c 15 41 04 04 00 00 00 00 00 00 03 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/40 Celsius +Min/Max Temperature Limit: 0/70 Celsius +Temperature History Size (Index): 128 (12) + +SCT Error Recovery Control: + Read: 80 (8.0 seconds) + Write: 80 (8.0 seconds) + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 1 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Toshiba/THNSNJ128/THNSNJ128GCST/E362BCAB2D17 b/SSD/Toshiba/THNSNJ128/THNSNJ128GCST/E362BCAB2D17 new file mode 100644 index 000000000..59d4ee987 --- /dev/null +++ b/SSD/Toshiba/THNSNJ128/THNSNJ128GCST/E362BCAB2D17 @@ -0,0 +1,352 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba HG6 Series SSD +Device Model: TOSHIBA THNSNJ128GCST +Serial Number: -- +LU WWN Device Id: 5 00080d ... +Firmware Version: JTRA0102 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 20 21:12:56 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 10133 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 2186 +167 SSD_Protect_Mode -O---K 100 100 000 - 0 +168 SATA_PHY_Error_Count -O--C- 100 100 000 - 9 +169 Bad_Block_Count PO--C- 100 100 010 - 100 +173 Erase_Count -O--C- 183 183 000 - 0 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 794 +194 Temperature_Celsius PO---K 066 053 020 - 34 (Min/Max 14/47) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 9 + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 9 [8] occurred at disk power-on lifetime: 6347 hours (264 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 98 00 00 00 80 d6 88 40 08 Error: ICRC, ABRT at LBA = 0x0080d688 = 8443528 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 01 e0 00 a0 00 00 00 80 da 88 40 08 07:17:10.886 READ FPDMA QUEUED + 60 04 00 00 98 00 00 00 80 d6 88 40 08 07:17:10.886 READ FPDMA QUEUED + 60 04 00 00 90 00 00 00 80 d2 88 40 08 07:17:10.886 READ FPDMA QUEUED + 60 04 00 00 88 00 00 00 80 ce 88 40 08 07:17:10.886 READ FPDMA QUEUED + 60 04 00 00 80 00 00 00 80 ca 88 40 08 07:17:10.886 READ FPDMA QUEUED + +Error 8 [7] occurred at disk power-on lifetime: 6347 hours (264 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 d0 00 00 00 7f 41 c8 40 08 Error: ICRC, ABRT at LBA = 0x007f41c8 = 8339912 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 40 00 28 00 00 00 81 42 50 40 08 07:17:06.687 READ FPDMA QUEUED + 60 01 08 00 20 00 00 00 81 41 40 40 08 07:17:06.687 READ FPDMA QUEUED + 60 04 00 00 10 00 00 00 81 3d 40 40 08 07:17:06.687 READ FPDMA QUEUED + 60 02 e8 00 08 00 00 00 7f 87 38 40 08 07:17:06.687 READ FPDMA QUEUED + 60 03 d0 00 00 00 00 00 7f 83 68 40 08 07:17:06.687 READ FPDMA QUEUED + +Error 7 [6] occurred at disk power-on lifetime: 6347 hours (264 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 60 00 00 00 80 63 b0 40 08 Error: ICRC, ABRT at LBA = 0x008063b0 = 8414128 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 04 00 00 78 00 00 00 80 6b d0 40 08 07:16:54.434 READ FPDMA QUEUED + 60 04 00 00 70 00 00 00 80 67 d0 40 08 07:16:54.434 READ FPDMA QUEUED + 60 00 18 00 68 00 00 00 80 67 b0 40 08 07:16:54.434 READ FPDMA QUEUED + 60 04 00 00 60 00 00 00 80 63 b0 40 08 07:16:54.434 READ FPDMA QUEUED + 60 03 d0 00 58 00 00 00 80 5f d0 40 08 07:16:54.434 READ FPDMA QUEUED + +Error 6 [5] occurred at disk power-on lifetime: 6347 hours (264 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 d8 00 00 00 7f e9 f0 40 08 Error: ICRC, ABRT at LBA = 0x007fe9f0 = 8382960 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 20 00 90 00 00 00 7f ed c8 40 08 07:14:50.458 READ FPDMA QUEUED + 60 01 00 00 88 00 00 00 7f f3 78 40 08 07:14:50.458 READ FPDMA QUEUED + 60 00 58 00 80 00 00 00 7f f3 18 40 08 07:14:50.458 READ FPDMA QUEUED + 60 00 10 00 78 00 00 00 7f f2 f8 40 08 07:14:50.458 READ FPDMA QUEUED + 60 00 88 00 70 00 00 00 7f f2 60 40 08 07:14:50.458 READ FPDMA QUEUED + +Error 5 [4] occurred at disk power-on lifetime: 4911 hours (204 days + 15 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 02 7e 0a 24 e0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ff ff ff ff ff ff ff ff ff ff ff ff ff 12:39:44.312 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 12:39:44.312 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 12:39:44.312 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 12:39:44.312 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 12:39:44.312 [VENDOR SPECIFIC] + +Error 4 [3] occurred at disk power-on lifetime: 4571 hours (190 days + 11 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 02 7e 0a 24 e0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ff ff ff ff ff ff ff ff ff ff ff ff ff 01:52:38.360 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 01:52:38.360 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 01:52:38.360 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 01:52:38.360 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 01:52:38.360 [VENDOR SPECIFIC] + +Error 3 [2] occurred at disk power-on lifetime: 2437 hours (101 days + 13 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 02 7e 0a 24 e0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ff ff ff ff ff ff ff ff ff ff ff ff ff 01:30:26.668 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 01:30:26.668 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 01:30:26.668 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 01:30:26.668 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 01:30:26.668 [VENDOR SPECIFIC] + +Error 2 [1] occurred at disk power-on lifetime: 2187 hours (91 days + 3 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 01 00 00 02 7e 0a 24 e0 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ff ff ff ff ff ff ff ff ff ff ff ff ff 04:04:50.800 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 04:04:50.800 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 04:04:50.800 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 04:04:50.800 [VENDOR SPECIFIC] + ff ff ff ff ff ff ff ff ff ff ff ff ff 04:04:50.800 [VENDOR SPECIFIC] + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 3 (0x0003) +Device State: Active (0) +Current Temperature: 34 Celsius +Power Cycle Min/Max Temperature: 21/34 Celsius +Lifetime Min/Max Temperature: 14/47 Celsius +Under/Over Temperature Limit Count: 0/0 +Vendor specific: +00 00 04 00 01 01 00 05 05 00 00 00 00 00 00 00 +00 02 00 00 36 a3 2c 02 02 02 00 00 00 00 00 06 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/40 Celsius +Min/Max Temperature Limit: 0/80 Celsius +Temperature History Size (Index): 128 (21) + +SCT Error Recovery Control: + Read: 600 (60.0 seconds) + Write: 600 (60.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 2186 --- Lifetime Power-On Resets +0x01 0x018 6 13662761668 --- Logical Sectors Written +0x01 0x020 6 242878858 --- Number of Write Commands +0x01 0x028 6 38887946179 --- Logical Sectors Read +0x01 0x030 6 620537421 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x010 1 35 --- Average Short Term Temperature +0x05 0x018 1 25 --- Average Long Term Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 21 --- Lowest Average Short Term Temperature +0x05 0x040 1 35 --- Highest Average Long Term Temperature +0x05 0x048 1 23 --- Lowest Average Long Term Temperature +0x05 0x050 4 4790 --- Time in Over-Temperature +0x05 0x058 1 40 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 8916 --- Number of Hardware Resets +0x06 0x018 4 9 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 17 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 35 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 35 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Toshiba/THNSNJ128/THNSNJ128GCSU/096BBE33C093 b/SSD/Toshiba/THNSNJ128/THNSNJ128GCSU/096BBE33C093 new file mode 100644 index 000000000..cad9edaf9 --- /dev/null +++ b/SSD/Toshiba/THNSNJ128/THNSNJ128GCSU/096BBE33C093 @@ -0,0 +1,355 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Toshiba HG6 Series SSD +Device Model: TOSHIBA THNSNJ128GCSU +Serial Number: -- +LU WWN Device Id: 5 00080d ... +Firmware Version: JURA0101 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Aug 3 15:57:47 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 254 (maximum performance) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 5) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Spin_Up_Time POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 32890 + 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 227 +167 SSD_Protect_Mode -O---K 100 100 000 - 0 +168 SATA_PHY_Error_Count -O--C- 100 100 000 - 859 +169 Bad_Block_Count PO--C- 100 100 010 - 100 +173 Erase_Count -O--C- 100 100 000 - 0 +175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 49 +194 Temperature_Celsius PO---K 065 051 020 - 35 (Min/Max 9/49) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +Device Error Count: 809 (device log contains only the most recent 256 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 809 [40] occurred at disk power-on lifetime: 102 hours (4 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 78 00 00 01 d7 73 97 40 08 Error: ICRC, ABRT at LBA = 0x01d77397 = 30897047 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 78 00 00 01 d7 73 97 40 08 00:05:32.286 READ FPDMA QUEUED + 60 00 08 00 70 00 00 01 d7 73 7f 40 08 00:05:32.286 READ FPDMA QUEUED + 60 00 08 00 68 00 00 01 d7 73 97 40 08 00:05:32.286 READ FPDMA QUEUED + 60 00 10 00 60 00 00 01 d7 73 87 40 08 00:05:32.286 READ FPDMA QUEUED + 60 00 08 00 58 00 00 01 d7 73 77 40 08 00:05:32.286 READ FPDMA QUEUED + +Error 808 [39] occurred at disk power-on lifetime: 102 hours (4 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 90 00 00 01 61 da ef 40 08 Error: ICRC, ABRT at LBA = 0x0161daef = 23190255 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 98 00 00 01 61 da f7 40 08 00:05:27.191 READ FPDMA QUEUED + 60 00 08 00 90 00 00 01 61 da ef 40 08 00:05:27.191 READ FPDMA QUEUED + 60 00 08 00 88 00 00 01 61 da d7 40 08 00:05:27.191 READ FPDMA QUEUED + 60 00 08 00 88 00 00 01 61 da b7 40 08 00:05:27.190 READ FPDMA QUEUED + 60 00 08 00 88 00 00 01 61 da cf 40 08 00:05:27.190 READ FPDMA QUEUED + +Error 807 [38] occurred at disk power-on lifetime: 102 hours (4 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 d0 00 00 01 16 b1 37 40 08 Error: ICRC, ABRT at LBA = 0x0116b137 = 18264375 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 10 00 d8 00 00 01 16 b1 17 40 08 00:05:21.567 READ FPDMA QUEUED + 60 00 08 00 d0 00 00 01 16 b1 37 40 08 00:05:21.567 READ FPDMA QUEUED + 60 00 10 00 c8 00 00 01 16 b1 27 40 08 00:05:21.567 READ FPDMA QUEUED + 60 00 08 00 c0 00 00 01 16 b1 0f 40 08 00:05:21.567 READ FPDMA QUEUED + 60 00 08 00 c0 00 00 01 16 b0 e7 40 08 00:05:21.567 READ FPDMA QUEUED + +Error 806 [37] occurred at disk power-on lifetime: 102 hours (4 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 78 00 00 00 0c bc e7 40 08 Error: ICRC, ABRT at LBA = 0x000cbce7 = 834791 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 08 00 80 00 00 00 0c bd 0f 40 08 00:04:42.961 READ FPDMA QUEUED + 60 00 08 00 78 00 00 00 0c bc e7 40 08 00:04:42.961 READ FPDMA QUEUED + 60 00 08 00 70 00 00 00 0c bc ff 40 08 00:04:42.961 READ FPDMA QUEUED + 60 00 08 00 68 00 00 00 0c bd 07 40 08 00:04:42.961 READ FPDMA QUEUED + 60 00 08 00 60 00 00 00 0c bc df 40 08 00:04:42.961 READ FPDMA QUEUED + +Error 805 [36] occurred at disk power-on lifetime: 102 hours (4 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 48 00 00 09 1c 89 bf 40 08 Error: ICRC, ABRT at LBA = 0x091c89bf = 152865215 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 60 00 80 ff 50 00 00 08 d0 d3 ff 40 08 00:01:45.311 READ FPDMA QUEUED + 60 01 00 00 48 00 00 09 1c 89 bf 40 08 00:01:45.311 READ FPDMA QUEUED + 61 01 00 00 40 00 00 09 1c 78 bf 40 08 00:01:45.310 WRITE FPDMA QUEUED + 60 01 00 00 38 00 00 09 1c 88 bf 40 08 00:01:45.310 READ FPDMA QUEUED + 61 01 00 00 30 00 00 09 1c 77 bf 40 08 00:01:45.310 WRITE FPDMA QUEUED + +Error 804 [35] occurred at disk power-on lifetime: 102 hours (4 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 09 1c 77 bf 40 08 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ff ff ff ff ff ff ff ff ff ff ff ff ff 00:01:45.208 [VENDOR SPECIFIC] + 60 01 00 00 08 00 00 09 1c 88 bf 40 08 00:01:45.207 READ FPDMA QUEUED + 61 01 00 00 00 00 00 09 1c 77 bf 40 08 00:01:45.207 WRITE FPDMA QUEUED + 60 01 00 00 f8 00 00 09 1c 87 bf 40 08 00:01:45.207 READ FPDMA QUEUED + 60 01 00 00 f0 00 00 09 1c 86 bf 40 08 00:01:45.207 READ FPDMA QUEUED + +Error 803 [34] occurred at disk power-on lifetime: 102 hours (4 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 00 00 00 08 d1 86 ff 40 08 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + ff ff ff ff ff ff ff ff ff ff ff ff ff 00:01:45.103 [VENDOR SPECIFIC] + 60 01 00 00 60 00 00 09 1c 82 bf 40 08 00:01:45.103 READ FPDMA QUEUED + 60 01 00 00 58 00 00 09 1c 81 bf 40 08 00:01:45.103 READ FPDMA QUEUED + 60 01 00 00 50 00 00 09 1c 80 bf 40 08 00:01:45.103 READ FPDMA QUEUED + 60 01 00 00 48 00 00 09 1c 7f bf 40 08 00:01:45.102 READ FPDMA QUEUED + +Error 802 [33] occurred at disk power-on lifetime: 102 hours (4 days + 6 hours) + When the command that caused the error occurred, the device was active or idle. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 84 -- 51 00 98 00 00 09 1c 7d bf 40 08 Error: ICRC, ABRT at LBA = 0x091c7dbf = 152862143 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 61 01 00 00 a0 00 00 09 1c 75 bf 40 08 00:01:44.999 WRITE FPDMA QUEUED + 60 01 00 00 98 00 00 09 1c 7d bf 40 08 00:01:44.999 READ FPDMA QUEUED + 61 01 00 00 90 00 00 09 1c 74 bf 40 08 00:01:44.999 WRITE FPDMA QUEUED + 61 00 80 00 88 00 00 09 1c 20 7f 40 08 00:01:44.999 WRITE FPDMA QUEUED + 61 01 00 00 80 00 00 09 1c 1f 7f 40 08 00:01:44.998 WRITE FPDMA QUEUED + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 21 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 3 (0x0003) +Device State: Active (0) +Current Temperature: 35 Celsius +Power Cycle Min/Max Temperature: 27/44 Celsius +Lifetime Min/Max Temperature: 9/49 Celsius +Under/Over Temperature Limit Count: 0/369 +Vendor specific: +00 00 04 00 05 01 00 05 05 00 00 00 00 00 00 00 +00 02 00 00 e8 bf 0e 07 02 02 00 00 00 00 00 06 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: 5/40 Celsius +Min/Max Temperature Limit: 0/80 Celsius +Temperature History Size (Index): 128 (86) + +SCT Error Recovery Control: + Read: 600 (60.0 seconds) + Write: 600 (60.0 seconds) + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 227 --- Lifetime Power-On Resets +0x01 0x018 6 171358393131 --- Logical Sectors Written +0x01 0x020 6 2817694818 --- Number of Write Commands +0x01 0x028 6 8888792998 --- Logical Sectors Read +0x01 0x030 6 599333592 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 35 --- Current Temperature +0x05 0x010 1 38 --- Average Short Term Temperature +0x05 0x018 1 29 --- Average Long Term Temperature +0x05 0x020 1 42 --- Highest Temperature +0x05 0x028 1 18 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 24 --- Lowest Average Short Term Temperature +0x05 0x040 1 29 --- Highest Average Long Term Temperature +0x05 0x048 1 27 --- Lowest Average Long Term Temperature +0x05 0x050 4 690 --- Time in Over-Temperature +0x05 0x058 1 40 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 5 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 1189 --- Number of Hardware Resets +0x06 0x018 4 859 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 100 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 9 Device-to-host register FISes sent due to a COMRESET +0x000b 4 0 CRC errors within host-to-device FIS +0x000d 4 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Toshiba/TR200/TR200 240GB/23C5FBA0B931 b/SSD/Toshiba/TR200/TR200 240GB/23C5FBA0B931 new file mode 100644 index 000000000..de2a626ea --- /dev/null +++ b/SSD/Toshiba/TR200/TR200 240GB/23C5FBA0B931 @@ -0,0 +1,126 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TOSHIBA-TR200 +Serial Number: -- +LU WWN Device Id: 5 8ce38e ... +Firmware Version: SBFA17.1 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 06:52:03 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x00) Offline data collection not supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 4450 + 12 Power_Cycle_Count -O--C- 100 100 000 - 637 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO---- 100 100 010 - 0 +173 Unknown_Attribute -O--C- 190 190 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 440 +194 Temperature_Celsius PO---K 066 056 020 - 34 (Min/Max 24/44) +241 Total_LBAs_Written -O--CK 100 100 000 - 152891 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 637 --- Lifetime Power-On Resets +0x01 0x010 4 4450 --- Power-on Hours +0x01 0x018 6 10019887885 --- Logical Sectors Written +0x01 0x028 6 7147769788 --- Logical Sectors Read +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 34 --- Current Temperature +0x05 0x020 1 44 --- Highest Temperature +0x05 0x028 1 24 --- Lowest Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + diff --git a/SSD/Transcend/TS120/TS120GMTS420S/B2D9FD0503D5 b/SSD/Transcend/TS120/TS120GMTS420S/B2D9FD0503D5 new file mode 100644 index 000000000..09236bd82 --- /dev/null +++ b/SSD/Transcend/TS120/TS120GMTS420S/B2D9FD0503D5 @@ -0,0 +1,156 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TS120GMTS420S +Serial Number: -- +LU WWN Device Id: 5 7c3548 ... +Firmware Version: S0130B0 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Thu Jul 16 10:51:43 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 53 + 12 Power_Cycle_Count -O--CK 100 100 050 - 213 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 15 +164 Unknown_Attribute -O--CK 100 100 050 - 9717 +165 Unknown_Attribute -O--CK 100 100 050 - 15 +166 Unknown_Attribute -O--CK 100 100 050 - 4 +167 Unknown_Attribute -O--CK 100 100 050 - 6 +168 Unknown_Attribute -O--CK 100 100 050 - 1000 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 52 +194 Temperature_Celsius -O---K 100 100 050 - 64 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 7855 +242 Total_LBAs_Read ----CK 100 100 050 - 6528 +245 Unknown_Attribute -O--CK 100 100 050 - 912 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 24 - +# 2 Short offline Completed without error 00% 24 - +# 3 Short offline Completed without error 00% 22 - +# 4 Short offline Completed without error 00% 21 - +# 5 Short offline Completed without error 00% 21 - +# 6 Short offline Completed without error 00% 19 - +# 7 Short offline Completed without error 00% 18 - +# 8 Short offline Completed without error 00% 16 - +# 9 Extended offline Completed without error 00% 12 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 213 --- Lifetime Power-On Resets +0x01 0x010 4 53 --- Power-on Hours +0x01 0x018 6 514796444 --- Logical Sectors Written +0x01 0x020 6 35788 --- Number of Write Commands +0x01 0x028 6 427826186 --- Logical Sectors Read +0x01 0x030 6 30179 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Transcend/TS128/TS128GMSA370/0F2AD8FC60DF b/SSD/Transcend/TS128/TS128GMSA370/0F2AD8FC60DF new file mode 100644 index 000000000..4839d1cb9 --- /dev/null +++ b/SSD/Transcend/TS128/TS128GMSA370/0F2AD8FC60DF @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS128GMSA370 +Serial Number: -- +LU WWN Device Id: 5 7c3548 ... +Firmware Version: P1225CH1 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sat Oct 24 23:35:34 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 279 + 12 Power_Cycle_Count ------ 100 100 000 - 1005 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 45 +163 Initial_Bad_Block_Count ------ 100 100 000 - 0 +164 Total_Erase_Count ------ 100 100 000 - 38576 +165 Max_Erase_Count ------ 100 100 000 - 87 +166 Min_Erase_Count ------ 100 100 000 - 0 +167 Average_Erase_Count ------ 100 100 000 - 37 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 99 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 111 +194 Temperature_Celsius ------ 100 100 000 - 32 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 62693 +242 Host_Reads_32MiB ------ 100 100 000 - 113257 +245 TLC_Writes_32MiB ------ 100 100 000 - 154304 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 213 - +# 2 Conveyance offline Completed without error 00% 213 - +# 3 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 7 0 65535 Read_scanning was completed without error +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 1005 --- Lifetime Power-On Resets +0x01 0x010 4 279 --- Power-on Hours +0x01 0x018 6 4108698708 --- Logical Sectors Written +0x01 0x020 6 60869610 --- Number of Write Commands +0x01 0x028 6 7422457553 --- Logical Sectors Read +0x01 0x030 6 84134051 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 111 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 5045 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Transcend/TS128/TS128GSSD370S/9A7DC3267F3B b/SSD/Transcend/TS128/TS128GSSD370S/9A7DC3267F3B new file mode 100644 index 000000000..da3f9314e --- /dev/null +++ b/SSD/Transcend/TS128/TS128GSSD370S/9A7DC3267F3B @@ -0,0 +1,163 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS128GSSD370S +Serial Number: -- +Firmware Version: N1126KB +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 16:26:47 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 20833 + 12 Power_Cycle_Count ------ 100 100 000 - 3217 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 44 +163 Initial_Bad_Block_Count ------ 100 100 000 - 25 +164 Total_Erase_Count ------ 100 100 000 - 159991 +165 Max_Erase_Count ------ 100 100 000 - 204 +166 Min_Erase_Count ------ 100 100 000 - 103 +167 Average_Erase_Count ------ 100 100 000 - 157 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 95 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 241 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 354 +194 Temperature_Celsius ------ 100 100 000 - 33 +195 Hardware_ECC_Recovered ------ 100 100 000 - 410 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 4 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 328793 +242 Host_Reads_32MiB ------ 100 100 000 - 283594 +245 TLC_Writes_32MiB ------ 100 100 000 - 639964 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 3217 --- Lifetime Power-On Resets +0x01 0x010 4 20833 --- Power-on Hours +0x01 0x018 6 72974638 --- Logical Sectors Written +0x01 0x020 6 280315650 --- Number of Write Commands +0x01 0x028 6 1405802522 --- Logical Sectors Read +0x01 0x030 6 207604662 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 358 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 27943 --- Number of Hardware Resets +0x06 0x018 4 4 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 5 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/Transcend/TS240/TS240GMTS420S/65FA0BD8388E b/SSD/Transcend/TS240/TS240GMTS420S/65FA0BD8388E new file mode 100644 index 000000000..ae2a62ce9 --- /dev/null +++ b/SSD/Transcend/TS240/TS240GMTS420S/65FA0BD8388E @@ -0,0 +1,96 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: TS240GMTS420S +Serial Number: -- +LU WWN Device Id: 5 7c3548 ... +Firmware Version: S0509A0 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 07:22:01 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 + 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 212 + 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 151 +160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 +161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 +163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 6 +164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 3060 +165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5 +166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1 +167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 2 +168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1000 +169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 +175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 +177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 +178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 +181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 +182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 +192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 28 +194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 58 +195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 +196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 +197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 +198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 +199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 +232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 +241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 5477 +242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 2654 +245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 822 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + + + diff --git a/SSD/Transcend/TS256/TS256GMTS400/93888CF64EF2 b/SSD/Transcend/TS256/TS256GMTS400/93888CF64EF2 new file mode 100644 index 000000000..70f139918 --- /dev/null +++ b/SSD/Transcend/TS256/TS256GMTS400/93888CF64EF2 @@ -0,0 +1,107 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS256GMTS400 +Serial Number: -- +Firmware Version: O1225G +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 06:13:04 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 + 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 + 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 341 + 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 3579 +160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0 +161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 142 +163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 23 +164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 59281 +165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 106 +166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 1 +167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 28 +168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 3000 +169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 100 +175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 +176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 +177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 25 +178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0 +181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 +182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 +192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 33 +194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 44 +195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 6838 +196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0 +197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0 +198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0 +232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 +241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 135233 +242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 165339 +245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 237124 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Transcend/TS256/TS256GSSD230S/0B66BE1B7774 b/SSD/Transcend/TS256/TS256GSSD230S/0B66BE1B7774 new file mode 100644 index 000000000..d05f46cb4 --- /dev/null +++ b/SSD/Transcend/TS256/TS256GSSD230S/0B66BE1B7774 @@ -0,0 +1,164 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS256GSSD230S +Serial Number: -- +LU WWN Device Id: 5 7c3548 ... +Firmware Version: S0423A +User Capacity: 256,060,514,304 bytes [256 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Aug 19 16:26:47 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Disabled +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 3538 + 12 Power_Cycle_Count ------ 100 100 000 - 585 +148 Total_SLC_Erase_Ct ------ 100 100 000 - 27770 +149 Max_SLC_Erase_Ct ------ 100 100 000 - 387 +150 Min_SLC_Erase_Ct ------ 100 100 000 - 201 +151 Average_SLC_Erase_Ct ------ 100 100 000 - 375 +164 Total_Erase_Count ------ 100 100 000 - 5470 +165 Max_Erase_Count ------ 100 100 000 - 33 +166 Min_Erase_Count ------ 100 100 000 - 0 +167 Average_Erase_Count ------ 100 100 000 - 4 +159 Unkn_SiliconMotion_Attr ------ 100 100 000 - 0 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 49 +163 Initial_Bad_Block_Count ------ 100 100 000 - 5 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 1000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 100 +177 Wear_Leveling_Count ------ 100 100 050 - 3 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 113 +194 Temperature_Celsius ------ 100 100 000 - 45 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 530 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 42741 +242 Host_Reads_32MiB ------ 100 100 000 - 16516 +245 TLC_Writes_32MiB ------ 100 100 000 - 21880 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x0a GPL R/W 8 Device Statistics Notification +0x10 GPL R/O 1 NCQ Command Error log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 64 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 0 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 585 --- Lifetime Power-On Resets +0x01 0x010 4 3538 --- Power-on Hours +0x01 0x018 6 2801120287 --- Logical Sectors Written +0x01 0x020 6 54416529 --- Number of Write Commands +0x01 0x028 6 1082436037 --- Logical Sectors Read +0x01 0x030 6 13275685 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 117 --- Resets Between Cmd Acceptance and Completion +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 9188494 --- Number of Hardware Resets +0x06 0x018 4 530 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/Transcend/TS32/TS32GMSA370/112FE204AE81 b/SSD/Transcend/TS32/TS32GMSA370/112FE204AE81 new file mode 100644 index 000000000..b18e97411 --- /dev/null +++ b/SSD/Transcend/TS32/TS32GMSA370/112FE204AE81 @@ -0,0 +1,106 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS32GMSA370 +Serial Number: -- +LU WWN Device Id: 5 7c3548 ... +Firmware Version: P1225CH1 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Oct 19 07:41:17 2020 EEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 + 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 + 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 497 + 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 73 +160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0 +161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 54 +163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 14 +164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 36249 +165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 103 +166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 1 +167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 35 +168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 1000 +169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 97 +175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 +176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 +177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 36 +178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0 +181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 +182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 +192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 17 +194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 46 +195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0 +196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0 +197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0 +198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0 +232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 +241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 25151 +242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 1194 +245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 36249 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Transcend/TS32/TS32GMSA370/3DE8C94852F1 b/SSD/Transcend/TS32/TS32GMSA370/3DE8C94852F1 new file mode 100644 index 000000000..75a8fd20b --- /dev/null +++ b/SSD/Transcend/TS32/TS32GMSA370/3DE8C94852F1 @@ -0,0 +1,162 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10-HBSD amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS32GMSA370 +Serial Number: -- +Firmware Version: P1225CH1 +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Oct 6 10:46:07 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 1577 + 12 Power_Cycle_Count ------ 100 100 000 - 42 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 151 +163 Initial_Bad_Block_Count ------ 100 100 000 - 13 +164 Total_Erase_Count ------ 100 100 000 - 1252780 +165 Max_Erase_Count ------ 100 100 000 - 658 +166 Min_Erase_Count ------ 100 100 000 - 556 +167 Average_Erase_Count ------ 100 100 000 - 600 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 80 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 3980 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 11 +194 Temperature_Celsius ------ 100 100 000 - 54 +195 Hardware_ECC_Recovered ------ 100 100 000 - 17 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 349568 +242 Host_Reads_32MiB ------ 100 100 000 - 13276 +245 TLC_Writes_32MiB ------ 100 100 000 - 626390 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 7 0 65535 Read_scanning was completed without error +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 42 --- Lifetime Power-On Resets +0x01 0x010 4 1577 --- Power-on Hours +0x01 0x018 6 22909342796 --- Logical Sectors Written +0x01 0x020 6 308763222 --- Number of Write Commands +0x01 0x028 6 870081835 --- Logical Sectors Read +0x01 0x030 6 18433865 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 11 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 541 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 20 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Transcend/TS32/TS32GSSD370S/9D7F5D822BE6 b/SSD/Transcend/TS32/TS32GSSD370S/9D7F5D822BE6 new file mode 100644 index 000000000..50215cc3f --- /dev/null +++ b/SSD/Transcend/TS32/TS32GSSD370S/9D7F5D822BE6 @@ -0,0 +1,164 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10-HBSD amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS32GSSD370S +Serial Number: -- +LU WWN Device Id: 5 7c3548 ... +Firmware Version: S0903D +User Capacity: 32,017,047,552 bytes [32.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 10:32:46 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 010 - 0 + 9 Power_On_Hours ------ 100 100 000 - 0 + 12 Power_Cycle_Count ------ 100 100 000 - 12 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 012 - 28 +163 Initial_Bad_Block_Count ------ 100 100 000 - 4 +164 Total_Erase_Count ------ 100 100 000 - 240 +165 Max_Erase_Count ------ 100 100 000 - 2 +166 Min_Erase_Count ------ 100 100 000 - 0 +167 Average_Erase_Count ------ 100 100 027 - 0 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 100 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 000 - 0 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 1 +194 Temperature_Celsius ------ 100 100 000 - 39 +195 Hardware_ECC_Recovered ------ 100 100 000 - 342 +196 Reallocated_Event_Count ------ 100 100 000 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 289 +242 Host_Reads_32MiB ------ 100 100 000 - 1010 +245 TLC_Writes_32MiB ------ 100 100 000 - 371 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - +# 2 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 7 0 65535 Read_scanning was completed without error +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 12 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 18997567 --- Logical Sectors Written +0x01 0x020 6 222187 --- Number of Write Commands +0x01 0x028 6 66208673 --- Logical Sectors Read +0x01 0x030 6 573365 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 21 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Transcend/TS512/TS512GMSA370/DD17C1EF90DA b/SSD/Transcend/TS512/TS512GMSA370/DD17C1EF90DA new file mode 100644 index 000000000..282fce936 --- /dev/null +++ b/SSD/Transcend/TS512/TS512GMSA370/DD17C1EF90DA @@ -0,0 +1,108 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS512GMSA370 +Serial Number: -- +LU WWN Device Id: 5 7c3548 ... +Firmware Version: P1225CH1 +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 12:49:54 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 + 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 + 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 524 + 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 34 +160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0 +161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 113 +163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 52 +164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 6060 +165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 11 +166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 0 +167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 2 +168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 3000 +169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 100 +175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 +176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 +177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0 +178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0 +181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 +182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 +192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 3 +194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 35 +195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0 +196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0 +197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0 +198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0 +232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 +241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 30693 +242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 6691 +245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 48480 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was never started +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + + + diff --git a/SSD/Transcend/TS512/TS512GSSD370/AFAAE4670D15 b/SSD/Transcend/TS512/TS512GSSD370/AFAAE4670D15 new file mode 100644 index 000000000..09d5a8532 --- /dev/null +++ b/SSD/Transcend/TS512/TS512GSSD370/AFAAE4670D15 @@ -0,0 +1,162 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS512GSSD370 +Serial Number: -- +Firmware Version: N1114H +User Capacity: 512,110,190,592 bytes [512 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 28 22:12:06 2020 JST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 9901 + 12 Power_Cycle_Count ------ 100 100 000 - 288 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 43 +163 Initial_Bad_Block_Count ------ 100 100 000 - 26 +164 Total_Erase_Count ------ 100 100 000 - 466447 +165 Max_Erase_Count ------ 100 100 000 - 506 +166 Min_Erase_Count ------ 100 100 000 - 405 +167 Average_Erase_Count ------ 100 100 000 - 459 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 85 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 1533 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 58 +194 Temperature_Celsius ------ 100 100 000 - 35 +195 Hardware_ECC_Recovered ------ 100 100 000 - 2369 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 5899228 +242 Host_Reads_32MiB ------ 100 100 000 - 1594768 +245 TLC_Writes_32MiB ------ 100 100 000 - 7463152 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 288 --- Lifetime Power-On Resets +0x01 0x010 4 9901 --- Power-on Hours +0x01 0x018 6 64810484 --- Logical Sectors Written +0x01 0x020 6 824255012 --- Number of Write Commands +0x01 0x028 6 1435503659 --- Logical Sectors Read +0x01 0x030 6 1068913686 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 158 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 4984 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 15 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + + + diff --git a/SSD/Transcend/TS64/TS64GMSA370/596242075497 b/SSD/Transcend/TS64/TS64GMSA370/596242075497 new file mode 100644 index 000000000..6221073ce --- /dev/null +++ b/SSD/Transcend/TS64/TS64GMSA370/596242075497 @@ -0,0 +1,163 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10-HBSD amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS64GMSA370 +Serial Number: -- +LU WWN Device Id: 5 7c3548 ... +Firmware Version: P1225CH1 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 20 10:31:41 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Disabled +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 + 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 + 9 Power_On_Hours ------ 100 100 000 - 472 + 12 Power_Cycle_Count ------ 100 100 000 - 14 +160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 +161 Valid_Spare_Block_Cnt ------ 100 100 000 - 44 +163 Initial_Bad_Block_Count ------ 100 100 000 - 0 +164 Total_Erase_Count ------ 100 100 000 - 60865 +165 Max_Erase_Count ------ 100 100 000 - 86 +166 Min_Erase_Count ------ 100 100 000 - 0 +167 Average_Erase_Count ------ 100 100 000 - 59 +168 Max_Erase_Count_of_Spec ------ 100 100 000 - 3000 +169 Remaining_Lifetime_Perc ------ 100 100 000 - 99 +175 Program_Fail_Count_Chip ------ 100 100 000 - 0 +176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 +177 Wear_Leveling_Count ------ 100 100 050 - 0 +178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 +181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 +182 Erase_Fail_Count_Total ------ 100 100 000 - 0 +192 Power-Off_Retract_Count ------ 100 100 000 - 2 +194 Temperature_Celsius ------ 100 100 000 - 40 +195 Hardware_ECC_Recovered ------ 100 100 000 - 0 +196 Reallocated_Event_Count ------ 100 100 016 - 0 +197 Current_Pending_Sector ------ 100 100 000 - 0 +198 Offline_Uncorrectable ------ 100 100 000 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +232 Available_Reservd_Space ------ 100 100 000 - 100 +241 Host_Writes_32MiB ------ 100 100 000 - 83874 +242 Host_Reads_32MiB ------ 100 100 000 - 321 +245 TLC_Writes_32MiB ------ 100 100 000 - 121730 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 GPL,SL R/O 1 Summary SMART error log +0x02 GPL,SL R/O 1 Comprehensive SMART error log +0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 GPL,SL R/O 1 SMART self-test log +0x07 GPL,SL R/O 1 Extended self-test log +0x09 GPL,SL R/W 1 Selective self-test log +0x10 GPL,SL R/O 1 NCQ Command Error log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 7 0 65535 Read_scanning was completed without error +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 2) == +0x01 0x008 4 14 --- Lifetime Power-On Resets +0x01 0x010 4 472 --- Power-on Hours +0x01 0x018 6 5496814432 --- Logical Sectors Written +0x01 0x020 6 85836656 --- Number of Write Commands +0x01 0x028 6 21097950 --- Logical Sectors Read +0x01 0x030 6 892499 --- Number of Read Commands +0x02 ===== = = === == Free-Fall Statistics (empty) == +0x03 ===== = = === == Rotating Media Statistics (empty) == +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (empty) == +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 115 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) not supported + diff --git a/SSD/Transcend/TS64/TS64GMSA370/B9117C7BB6E8 b/SSD/Transcend/TS64/TS64GMSA370/B9117C7BB6E8 new file mode 100644 index 000000000..1a140d030 --- /dev/null +++ b/SSD/Transcend/TS64/TS64GMSA370/B9117C7BB6E8 @@ -0,0 +1,107 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Silicon Motion based SSDs +Device Model: TS64GMSA370 +Serial Number: -- +Firmware Version: O0918B +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Oct 27 16:59:08 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x05) Offline data collection activity + was aborted by an interrupting command from host. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 16) The self-test routine was aborted by + the host. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x71) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. +Conveyance self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 + 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 + 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 1809 + 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 59 +160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0 +161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 54 +163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 14 +164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 224922 +165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 260 +166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 160 +167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 219 +168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 3000 +169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 93 +175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 +176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0 +177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 656 +178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0 +181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 +182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 +192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 12 +194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 53 +195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 273 +196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0 +197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0 +198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0 +232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 +241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 343900 +242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 110055 +245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 449844 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Abort offline test Completed without error 00% 0 - +# 2 Short offline Self-test routine in progress 00% 0 - +# 3 Abort offline test Aborted by host 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing + 6 0 65535 Read_scanning was aborted by an interrupting command from host +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + diff --git a/SSD/Transcend/TS64/TS64GSSD25S-M/7B3E9824D92F b/SSD/Transcend/TS64/TS64GSSD25S-M/7B3E9824D92F new file mode 100644 index 000000000..9d1056e0a --- /dev/null +++ b/SSD/Transcend/TS64/TS64GSSD25S-M/7B3E9824D92F @@ -0,0 +1,114 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: JMicron based SSDs +Device Model: TS64GSSD25S-M +Serial Number: -- +Firmware Version: 101028 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ATA8-ACS (minor revision not indicated) +SATA Version is: SATA 2.6, 3.0 Gb/s +Local Time is: Fri Aug 28 20:11:06 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 163) Reserved. +Total time to complete Offline +data collection: ( 30) seconds. +Offline data collection +capabilities: (0x1b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 16777215 + 2 Throughput_Performance P-S--- 100 100 050 - 0 + 3 Unknown_JMF_Attribute POS--- 100 100 050 - 0 + 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 + 7 Unknown_JMF_Attribute PO-R-- 100 100 050 - 0 + 8 Unknown_JMF_Attribute P-S--- 100 100 050 - 0 + 9 Power_On_Hours -O--C- 100 100 000 - 25609 + 10 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 + 12 Power_Cycle_Count -O--C- 100 100 000 - 197 +168 SATA_Phy_Error_Count -O--C- 100 100 000 - 1 +175 Bad_Cluster_Table_Count PO---- 100 100 010 - 0 +192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 0 +194 Temperature_Celsius -O---K 051 100 000 - 51 (Min/Max 41/51) +197 Current_Pending_Sector -O--C- 100 100 000 - 0 +240 Unknown_JMF_Attribute PO--C- 100 100 050 - 0 +170 Bad_Block_Count PO---- 100 100 010 - 0 154 26 +173 Erase_Count -O--C- 100 100 000 - 2 664 44 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP/SMART Log 0x04) not supported + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 1 Command failed due to ICRC error +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Vaseky/128GV800/128GV800/477BF0DEE340 b/SSD/Vaseky/128GV800/128GV800/477BF0DEE340 new file mode 100644 index 000000000..f417b55d6 --- /dev/null +++ b/SSD/Vaseky/128GV800/128GV800/477BF0DEE340 @@ -0,0 +1,147 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Vaseky 128GV800 +Serial Number: -- +Firmware Version: S0515A0 +User Capacity: 128,035,676,160 bytes [128 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-3 T13/2161-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 21 10:38:01 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 3874 + 12 Power_Cycle_Count -O--CK 100 100 050 - 5 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 14 +164 Unknown_Attribute -O--CK 100 100 050 - 4791 +165 Unknown_Attribute -O--CK 100 100 050 - 35 +166 Unknown_Attribute -O--CK 100 100 050 - 3 +167 Unknown_Attribute -O--CK 100 100 050 - 23 +168 Unknown_Attribute -O--CK 100 100 050 - 2000 +169 Unknown_Attribute -O--CK 100 100 050 - 99 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 3 +194 Temperature_Celsius -O---K 100 100 050 - 40 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 21160 +242 Total_LBAs_Read ----CK 100 100 050 - 5207 +245 Unknown_Attribute -O--CK 100 100 050 - 56517 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 88 Current Device Internal Status Data log +0x25 GPL R/O 32 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 3874 --- Power-on Hours +0x01 0x018 6 1386745479 --- Logical Sectors Written +0x01 0x020 6 65176098 --- Number of Write Commands +0x01 0x028 6 341307615 --- Logical Sectors Read +0x01 0x030 6 8769058 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 2 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 14 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/Vaseky/V800/V800-60G/9D38D82F0C6A b/SSD/Vaseky/V800/V800-60G/9D38D82F0C6A new file mode 100644 index 000000000..ad53898d6 --- /dev/null +++ b/SSD/Vaseky/V800/V800-60G/9D38D82F0C6A @@ -0,0 +1,148 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p7 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: Vaseky V800/60G +Serial Number: -- +Firmware Version: S0424A0 +User Capacity: 60,022,480,896 bytes [60.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: mSATA +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 09:17:18 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 + 9 Power_On_Hours -O--CK 100 100 050 - 10235 + 12 Power_Cycle_Count -O--CK 100 100 050 - 16 +160 Unknown_Attribute -O--CK 100 100 050 - 0 +161 Unknown_Attribute PO--CK 100 100 050 - 100 +163 Unknown_Attribute -O--CK 100 100 050 - 33 +164 Unknown_Attribute -O--CK 100 100 050 - 4033 +165 Unknown_Attribute -O--CK 100 100 050 - 14 +166 Unknown_Attribute -O--CK 100 100 050 - 1 +167 Unknown_Attribute -O--CK 100 100 050 - 8 +168 Unknown_Attribute -O--CK 100 100 050 - 7000 +169 Unknown_Attribute -O--CK 100 100 050 - 100 +175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 +176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 +177 Wear_Leveling_Count -O--CK 100 100 050 - 0 +178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 +181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 +182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 +192 Power-Off_Retract_Count -O--CK 100 100 050 - 12 +194 Temperature_Celsius -O---K 100 100 050 - 35 +195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 +196 Reallocated_Event_Count -O--CK 100 100 050 - 0 +197 Current_Pending_Sector -O--CK 100 100 050 - 0 +198 Offline_Uncorrectable -O--CK 100 100 050 - 0 +199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 +232 Available_Reservd_Space -O--CK 100 100 050 - 100 +241 Total_LBAs_Written ----CK 100 100 050 - 5273 +242 Total_LBAs_Read ----CK 100 100 050 - 747 +245 Unknown_Attribute -O--CK 100 100 050 - 1035 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 10235 --- Power-on Hours +0x01 0x018 6 345600172 --- Logical Sectors Written +0x01 0x020 6 239366 --- Number of Write Commands +0x01 0x028 6 48999481 --- Logical Sectors Read +0x01 0x030 6 27433 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/WDC/WDBNCE5000/WDBNCE5000PNC/F2352F56D061 b/SSD/WDC/WDBNCE5000/WDBNCE5000PNC/F2352F56D061 new file mode 100644 index 000000000..b359cac01 --- /dev/null +++ b/SSD/WDC/WDBNCE5000/WDBNCE5000PNC/F2352F56D061 @@ -0,0 +1,89 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WDBNCE5000PNC +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: 411030WD +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Oct 31 13:51:12 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 65534 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 417 +165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 18677989 +166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 37 +168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1 +169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 155 +170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 +174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 74 +184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 +194 Temperature_Celsius 0x0022 063 043 --- Old_age Always - 37 (Min/Max 23/43) +199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 +230 Unknown_SSD_Attribute 0x0032 001 001 --- Old_age Always - 193273528365 +232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100 +233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 224 +234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 2364 +241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 2587 +242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 187 +244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/SSD/WDC/WDS100/WDS100T2B0A-00SM50/05DF5EC96C08 b/SSD/WDC/WDS100/WDS100T2B0A-00SM50/05DF5EC96C08 new file mode 100644 index 000000000..732a52d34 --- /dev/null +++ b/SSD/WDC/WDS100/WDS100T2B0A-00SM50/05DF5EC96C08 @@ -0,0 +1,147 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS100T2B0A-00SM50 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: 401020WD +User Capacity: 1,000,204,886,016 bytes [1.00 TB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 24 23:50:53 2020 CDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 252 + 12 Power_Cycle_Count -O--CK 100 100 --- - 238 +165 Block_Erase_Count -O--CK 100 100 --- - 327682 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 0 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 60 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 1 +169 Total_Bad_Blocks -O--CK 100 100 --- - 849 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 0 +174 Unexpected_Power_Loss -O--CK 100 100 --- - 12 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 072 035 --- - 28 (Min/Max 21/35) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 001 001 --- - 0x000000000000 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 26 +234 NAND_GB_Written_SLC -O--CK 100 100 --- - 68 +241 Host_Writes_GiB ----CK 253 253 --- - 78 +242 Host_Reads_GiB ----CK 253 253 --- - 23 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x24 GPL R/O 2277 Current Device Internal Status Data log +0x25 GPL R/O 2277 Saved Device Internal Status Data log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 238 --- Lifetime Power-On Resets +0x01 0x010 4 252 --- Power-on Hours +0x01 0x018 6 164024517 --- Logical Sectors Written +0x01 0x020 6 2606421 --- Number of Write Commands +0x01 0x028 6 50304397 --- Logical Sectors Read +0x01 0x030 6 34360486092 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/WDC/WDS120/WDS120G1G0A-00SS50/9D0A409F744C b/SSD/WDC/WDS120/WDS120G1G0A-00SS50/9D0A409F744C new file mode 100644 index 000000000..59decad50 --- /dev/null +++ b/SSD/WDC/WDS120/WDS120G1G0A-00SS50/9D0A409F744C @@ -0,0 +1,144 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE-p2 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS120G1G0A-00SS50 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: Z3311000 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Oct 4 21:39:55 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 000 100 000 - 29276 + 12 Power_Cycle_Count -O--CK 100 100 000 - 83 +165 Block_Erase_Count -O--CK 100 100 000 - 2048795018570 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 000 - 1 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 000 - 0 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 000 - 24 +169 Total_Bad_Blocks -O--CK 100 100 000 - 0 +170 Grown_Bad_Blocks -O--CK 100 100 000 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 10 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 27 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 049 032 000 - 51 (Min/Max 0/68) +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x01c3009d01c3 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 000 - 1310 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 6349 +241 Host_Writes_GiB ----CK 253 253 000 - 4551 +242 Host_Reads_GiB ----CK 253 253 000 - 1525 +244 Temp_Throttle_Status -O--CK 000 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 83 --- Lifetime Power-On Resets +0x01 0x010 4 29276 --- Power-on Hours +0x01 0x018 6 954538179 --- Logical Sectors Written +0x01 0x020 6 131751835 --- Number of Write Commands +0x01 0x028 6 3199585377 --- Logical Sectors Read +0x01 0x030 6 26660080 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 8 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/WDC/WDS120/WDS120G1G0B-00RC30/5FF93853A772 b/SSD/WDC/WDS120/WDS120G1G0B-00RC30/5FF93853A772 new file mode 100644 index 000000000..8442762ce --- /dev/null +++ b/SSD/WDC/WDS120/WDS120G1G0B-00RC30/5FF93853A772 @@ -0,0 +1,142 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS120G1G0B-00RC30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: Z3311000 +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Fri Aug 14 06:50:29 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 000 100 000 - 909 + 12 Power_Cycle_Count -O--CK 100 100 000 - 1447 +165 Block_Erase_Count -O--CK 100 100 000 - 81660543689 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 000 - 1 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 000 - 0 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 000 - 41 +169 Total_Bad_Blocks -O--CK 100 100 000 - 0 +170 Grown_Bad_Blocks -O--CK 100 100 000 - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 17 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 26 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 000 - 0 +194 Temperature_Celsius -O---K 059 049 000 - 41 (Min/Max 0/51) +199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x00ed00fe00fe +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 000 - 2110 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 3306 +241 Host_Writes_GiB ----CK 253 253 000 - 1026 +242 Host_Reads_GiB ----CK 253 253 000 - 341 +244 Temp_Throttle_Status -O--CK 000 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 1447 --- Lifetime Power-On Resets +0x01 0x010 4 909 --- Power-on Hours +0x01 0x018 6 2151853024 --- Logical Sectors Written +0x01 0x020 6 12152760 --- Number of Write Commands +0x01 0x028 6 716803744 --- Logical Sectors Read +0x01 0x030 6 9040930 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/WDC/WDS120/WDS120G2G0A-00JH30/A700D44C1D5D b/SSD/WDC/WDS120/WDS120G2G0A-00JH30/A700D44C1D5D new file mode 100644 index 000000000..c54d1fd2c --- /dev/null +++ b/SSD/WDC/WDS120/WDS120G2G0A-00JH30/A700D44C1D5D @@ -0,0 +1,165 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS120G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UE450000 +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Sun Aug 2 00:22:56 2020 NZST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1981 + 12 Power_Cycle_Count -O--CK 100 100 000 - 352 +165 Block_Erase_Count -O--CK 100 100 000 - 223 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 4 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 15 +169 Total_Bad_Blocks -O--CK 100 100 --- - 51 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 4 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 22 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 070 038 000 - 30 (Min/Max 3/38) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x003f0050003f +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 492 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 1245 +241 Host_Writes_GiB ----CK 100 100 000 - 455 +242 Host_Reads_GiB ----CK 100 100 000 - 247 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 352 --- Lifetime Power-On Resets +0x01 0x010 4 1981 --- Power-on Hours +0x01 0x018 6 955731405 --- Logical Sectors Written +0x01 0x028 6 518272016 --- Logical Sectors Read +0x01 0x038 6 1981 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 30 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 37 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 32 --- Highest Average Short Term Temperature +0x05 0x038 1 32 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 64 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 65 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/WDC/WDS120/WDS120G2G0B-00EPW0/F50CC136B652 b/SSD/WDC/WDS120/WDS120G2G0B-00EPW0/F50CC136B652 new file mode 100644 index 000000000..e8e819a42 --- /dev/null +++ b/SSD/WDC/WDS120/WDS120G2G0B-00EPW0/F50CC136B652 @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p10 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS120G2G0B-00EPW0 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UI450000 +User Capacity: 120,040,980,480 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Sep 17 14:52:06 2020 AST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 21) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 626 + 12 Power_Cycle_Count -O--CK 100 100 000 - 675 +165 Block_Erase_Count -O--CK 100 100 000 - 193 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 3 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 8 +169 Total_Bad_Blocks -O--CK 100 100 --- - 67 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 3 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 56 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 059 051 000 - 41 (Min/Max 14/51) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x0037003c0037 +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 277 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 1079 +241 Host_Writes_GiB ----CK 100 100 000 - 459 +242 Host_Reads_GiB ----CK 100 100 000 - 296 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 675 --- Lifetime Power-On Resets +0x01 0x010 4 626 --- Power-on Hours +0x01 0x018 6 964177579 --- Logical Sectors Written +0x01 0x028 6 621412455 --- Logical Sectors Read +0x01 0x038 6 626 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 34 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 12 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/WDC/WDS240/WDS240G2G0A-00JH30/1662CD83859A b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/1662CD83859A new file mode 100644 index 000000000..5df690806 --- /dev/null +++ b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/1662CD83859A @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS240G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UF400400 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Oct 30 00:23:17 2020 KST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 41) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 35 + 12 Power_Cycle_Count -O--CK 100 100 000 - 46 +165 Block_Erase_Count -O--CK 100 100 000 - 21 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 0 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 20 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 2 +169 Total_Bad_Blocks -O--CK 100 100 --- - 95 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 0 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 6 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 069 045 000 - 31 (Min/Max 18/45) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x000600000006 +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 46 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 168 +241 Host_Writes_GiB ----CK 100 100 000 - 71 +242 Host_Reads_GiB ----CK 100 100 000 - 17 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa4 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 4 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 46 --- Lifetime Power-On Resets +0x01 0x010 4 35 --- Power-on Hours +0x01 0x018 6 149665359 --- Logical Sectors Written +0x01 0x028 6 36917035 --- Logical Sectors Read +0x01 0x038 6 35 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 31 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 45 --- Highest Temperature +0x05 0x028 1 32 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/WDC/WDS240/WDS240G2G0A-00JH30/16AFA3811E7F b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/16AFA3811E7F new file mode 100644 index 000000000..ff424261e --- /dev/null +++ b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/16AFA3811E7F @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS240G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UF430400 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:44:57 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 41) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1251 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5 +165 Block_Erase_Count -O--CK 100 100 000 - 356 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 58 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 3 +169 Total_Bad_Blocks -O--CK 100 100 --- - 229 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 1 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 1 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 057 063 000 - 43 (Min/Max 17/63) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x010100140101 +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 59 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 2842 +241 Host_Writes_GiB ----CK 100 100 000 - 1153 +242 Host_Reads_GiB ----CK 100 100 000 - 588 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa4 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 4 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 1251 --- Power-on Hours +0x01 0x018 6 2419693056 --- Logical Sectors Written +0x01 0x028 6 1234373853 --- Logical Sectors Read +0x01 0x038 6 1251 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 43 --- Current Temperature +0x05 0x010 1 42 --- Average Short Term Temperature +0x05 0x018 1 43 --- Average Long Term Temperature +0x05 0x020 1 63 --- Highest Temperature +0x05 0x028 1 35 --- Lowest Temperature +0x05 0x030 1 45 --- Highest Average Short Term Temperature +0x05 0x038 1 45 --- Lowest Average Short Term Temperature +0x05 0x040 1 44 --- Highest Average Long Term Temperature +0x05 0x048 1 44 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/WDC/WDS240/WDS240G2G0A-00JH30/1BE00C2482B7 b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/1BE00C2482B7 new file mode 100644 index 000000000..2d0776e89 --- /dev/null +++ b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/1BE00C2482B7 @@ -0,0 +1,174 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS240G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UF450000 +User Capacity: 240,065,183,744 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 6 14:38:35 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 42) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1350 + 12 Power_Cycle_Count -O--CK 100 100 000 - 2259 +165 Block_Erase_Count -O--CK 100 100 000 - 697 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 7 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 16 +169 Total_Bad_Blocks -O--CK 100 100 --- - 186 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 7 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 272 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 062 048 000 - 38 (Min/Max 0/48) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x016301280163 +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 1585 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 5321 +241 Host_Writes_GiB ----CK 100 100 000 - 2244 +242 Host_Reads_GiB ----CK 100 100 000 - 2795 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 621 - +# 2 Extended offline Completed without error 00% 616 - +# 3 Short offline Completed without error 00% 614 - +# 4 Extended offline Completed without error 00% 330 - +# 5 Short offline Aborted by host 40% 291 - +# 6 Short offline Completed without error 00% 266 - +# 7 Short offline Completed without error 00% 266 - +# 8 Short offline Aborted by host 90% 262 - +# 9 Short offline Completed without error 00% 15 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 2259 --- Lifetime Power-On Resets +0x01 0x010 4 1350 --- Power-on Hours +0x01 0x018 6 4707870759 --- Logical Sectors Written +0x01 0x028 6 5862865578 --- Logical Sectors Read +0x01 0x038 6 1352 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 46 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 4 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/WDC/WDS240/WDS240G2G0A-00JH30/300FCCA363E1 b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/300FCCA363E1 new file mode 100644 index 000000000..647e7825a --- /dev/null +++ b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/300FCCA363E1 @@ -0,0 +1,167 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS240G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UF510000 +User Capacity: 240,065,183,744 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:44:57 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 42) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1251 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5 +165 Block_Erase_Count -O--CK 100 100 000 - 408 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 0 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 2 +169 Total_Bad_Blocks -O--CK 100 100 --- - 662 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 0 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 1 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 063 051 000 - 37 (Min/Max 13/51) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x011000000110 +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 53 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 3110 +241 Host_Writes_GiB ----CK 100 100 000 - 1128 +242 Host_Reads_GiB ----CK 100 100 000 - 593 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 1251 --- Power-on Hours +0x01 0x018 6 2367650176 --- Logical Sectors Written +0x01 0x028 6 1244387988 --- Logical Sectors Read +0x01 0x038 6 1251 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 37 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 38 --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 31 --- Lowest Temperature +0x05 0x030 1 38 --- Highest Average Short Term Temperature +0x05 0x038 1 38 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 38 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/WDC/WDS240/WDS240G2G0A-00JH30/3C0A22C1C5FC b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/3C0A22C1C5FC new file mode 100644 index 000000000..ff3e044f4 --- /dev/null +++ b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/3C0A22C1C5FC @@ -0,0 +1,91 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.7] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS240G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UF500000 +User Capacity: 240,065,183,744 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sun Aug 30 11:10:07 2020 MSK +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART Status not supported: Incomplete response, ATA output registers missing +SMART overall-health self-assessment test result: PASSED +Warning: This result is based on an Attribute check. + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 42) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 214 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 113 +165 Block_Erase_Count 0x0032 100 100 000 Old_age Always - 101 +166 Minimum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 1 +167 Max_Bad_Blocks_per_Die 0x0032 100 100 --- Old_age Always - 0 +168 Maximum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 3 +169 Total_Bad_Blocks 0x0032 100 100 --- Old_age Always - 455 +170 Grown_Bad_Blocks 0x0032 100 100 --- Old_age Always - 0 +171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 +173 Average_PE_Cycles_TLC 0x0032 100 100 000 Old_age Always - 1 +174 Unexpected_Power_Loss 0x0032 100 100 000 Old_age Always - 13 +184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 +194 Temperature_Celsius 0x0022 059 053 000 Old_age Always - 41 (Min/Max 16/53) +199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 +230 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0x001c0014001c +232 Available_Reservd_Space 0x0033 100 100 005 Pre-fail Always - 100 +233 NAND_GB_Written_TLC 0x0032 100 100 --- Old_age Always - 73 +234 NAND_GB_Written_SLC 0x0032 100 100 000 Old_age Always - 775 +241 Host_Writes_GiB 0x0030 100 100 000 Old_age Offline - 355 +242 Host_Reads_GiB 0x0030 100 100 000 Old_age Offline - 61 +244 Temp_Throttle_Status 0x0032 000 100 --- Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + + + diff --git a/SSD/WDC/WDS240/WDS240G2G0A-00JH30/5820F94C4D11 b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/5820F94C4D11 new file mode 100644 index 000000000..3a1fd5fe6 --- /dev/null +++ b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/5820F94C4D11 @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS240G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UF430400 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:44:57 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 41) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1251 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5 +165 Block_Erase_Count -O--CK 100 100 000 - 356 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 81 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 2 +169 Total_Bad_Blocks -O--CK 100 100 --- - 473 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 1 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 1 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 059 061 000 - 41 (Min/Max 17/61) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x010100140101 +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 58 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 2842 +241 Host_Writes_GiB ----CK 100 100 000 - 1153 +242 Host_Reads_GiB ----CK 100 100 000 - 588 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa4 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 4 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 1251 --- Power-on Hours +0x01 0x018 6 2419692288 --- Logical Sectors Written +0x01 0x028 6 1235212711 --- Logical Sectors Read +0x01 0x038 6 1251 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 41 --- Current Temperature +0x05 0x010 1 40 --- Average Short Term Temperature +0x05 0x018 1 41 --- Average Long Term Temperature +0x05 0x020 1 60 --- Highest Temperature +0x05 0x028 1 33 --- Lowest Temperature +0x05 0x030 1 42 --- Highest Average Short Term Temperature +0x05 0x038 1 42 --- Lowest Average Short Term Temperature +0x05 0x040 1 41 --- Highest Average Long Term Temperature +0x05 0x048 1 41 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/WDC/WDS240/WDS240G2G0A-00JH30/EE40B61EE899 b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/EE40B61EE899 new file mode 100644 index 000000000..4b2522f5f --- /dev/null +++ b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/EE40B61EE899 @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS240G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UF430400 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 15:44:57 2020 CET +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 41) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1251 + 12 Power_Cycle_Count -O--CK 100 100 000 - 5 +165 Block_Erase_Count -O--CK 100 100 000 - 348 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 48 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 3 +169 Total_Bad_Blocks -O--CK 100 100 --- - 224 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 1 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 1 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 062 059 000 - 38 (Min/Max 12/59) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x006300140063 +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 57 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 2777 +241 Host_Writes_GiB ----CK 100 100 000 - 1128 +242 Host_Reads_GiB ----CK 100 100 000 - 591 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa4 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 4 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 5 --- Lifetime Power-On Resets +0x01 0x010 4 1251 --- Power-on Hours +0x01 0x018 6 2367650176 --- Logical Sectors Written +0x01 0x028 6 1240362141 --- Logical Sectors Read +0x01 0x038 6 1251 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 37 --- Average Short Term Temperature +0x05 0x018 1 38 --- Average Long Term Temperature +0x05 0x020 1 58 --- Highest Temperature +0x05 0x028 1 30 --- Lowest Temperature +0x05 0x030 1 39 --- Highest Average Short Term Temperature +0x05 0x038 1 39 --- Lowest Average Short Term Temperature +0x05 0x040 1 38 --- Highest Average Long Term Temperature +0x05 0x048 1 38 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 6 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/WDC/WDS240/WDS240G2G0A-00JH30/F2688EE3689A b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/F2688EE3689A new file mode 100644 index 000000000..4cafa394c --- /dev/null +++ b/SSD/WDC/WDS240/WDS240G2G0A-00JH30/F2688EE3689A @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS240G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UF220400 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Sun Sep 13 13:48:21 2020 HKT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 41) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 1 + 9 Power_On_Hours -O--CK 100 100 000 - 2110 + 12 Power_Cycle_Count -O--CK 100 100 000 - 521 +165 Block_Erase_Count -O--CK 100 100 000 - 270 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 3 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 12 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 9 +169 Total_Bad_Blocks -O--CK 100 100 --- - 117 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 1 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 3 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 8 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 060 051 000 - 40 (Min/Max 13/51) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x004d003c004d +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 763 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 2157 +241 Host_Writes_GiB ----CK 100 100 000 - 928 +242 Host_Reads_GiB ----CK 100 100 000 - 761 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa4 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 4 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 33 - +# 2 Short offline Completed without error 00% 32 - +# 3 Short offline Completed without error 00% 16 - +# 4 Short offline Completed without error 00% 5 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 521 --- Lifetime Power-On Resets +0x01 0x010 4 2110 --- Power-on Hours +0x01 0x018 6 1947616806 --- Logical Sectors Written +0x01 0x028 6 1596429156 --- Logical Sectors Read +0x01 0x038 6 2111 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 40 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 51 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 44 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 45 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/WDC/WDS240/WDS240G2G0B-00EPW0/4A63FE07F552 b/SSD/WDC/WDS240/WDS240G2G0B-00EPW0/4A63FE07F552 new file mode 100644 index 000000000..5e7436fb1 --- /dev/null +++ b/SSD/WDC/WDS240/WDS240G2G0B-00EPW0/4A63FE07F552 @@ -0,0 +1,184 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue / Red / Green SSDs +Device Model: WDC WDS240G2G0B-00EPW0 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UJ450000 +User Capacity: 240,065,183,744 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Wed Oct 21 23:37:16 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 32) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x15) SMART execute Offline immediate. + No Auto Offline data collection support. + Abort Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 42) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 7032 + 12 Power_Cycle_Count -O--CK 100 100 000 - 776 +165 Block_Erase_Count -O--CK 100 100 000 - 1659 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 22 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 28 +169 Total_Bad_Blocks -O--CK 100 100 --- - 242 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 22 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 28 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 074 043 000 - 26 (Min/Max 5/43) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x044a0428044a +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 5441 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 12650 +241 Host_Writes_GiB ----CK 100 100 000 - 5946 +242 Host_Reads_GiB ----CK 100 100 000 - 7114 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 3 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Short offline Completed without error 00% 6985 - +# 2 Short offline Completed without error 00% 6949 - +# 3 Short offline Completed without error 00% 6938 - +# 4 Short offline Completed without error 00% 6903 - +# 5 Short offline Completed without error 00% 6891 - +# 6 Short offline Completed without error 00% 6877 - +# 7 Short offline Completed without error 00% 6869 - +# 8 Short offline Completed without error 00% 4592 - +# 9 Short offline Completed without error 00% 4584 - +#10 Short offline Completed without error 00% 4575 - +#11 Short offline Completed without error 00% 4567 - +#12 Short offline Completed without error 00% 4564 - +#13 Short offline Completed without error 00% 4562 - +#14 Extended offline Self-test routine in progress 60% 4562 - +#15 Short offline Completed without error 00% 4554 - +#16 Short offline Completed without error 00% 4547 - +#17 Short offline Completed without error 00% 4540 - +#18 Short offline Completed without error 00% 4533 - +#19 Short offline Completed without error 00% 4520 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 776 --- Lifetime Power-On Resets +0x01 0x010 4 7032 --- Power-on Hours +0x01 0x018 6 12470074517 --- Logical Sectors Written +0x01 0x028 6 14920868632 --- Logical Sectors Read +0x01 0x038 6 7032 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 26 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 43 --- Highest Temperature +0x05 0x028 1 21 --- Lowest Temperature +0x05 0x030 1 27 --- Highest Average Short Term Temperature +0x05 0x038 1 27 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 4 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 43 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 44 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/WDC/WDS240/WDS240G2G0B-00EPW0/BF2E013147A1 b/SSD/WDC/WDS240/WDS240G2G0B-00EPW0/BF2E013147A1 new file mode 100644 index 000000000..20ef5a049 --- /dev/null +++ b/SSD/WDC/WDS240/WDS240G2G0B-00EPW0/BF2E013147A1 @@ -0,0 +1,166 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 13.0-CURRENT arm64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS240G2G0B-00EPW0 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UJ430400 +User Capacity: 240,057,409,536 bytes [240 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: M.2 +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Oct 29 14:14:10 2020 UTC +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 41) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 1063 + 12 Power_Cycle_Count -O--CK 100 100 000 - 99 +165 Block_Erase_Count -O--CK 100 100 000 - 53 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 74 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 2 +169 Total_Bad_Blocks -O--CK 100 100 --- - 358 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 1 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 42 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 062 041 000 - 38 (Min/Max 19/41) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x000f0014000f +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 102 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 421 +241 Host_Writes_GiB ----CK 100 100 000 - 128 +242 Host_Reads_GiB ----CK 100 100 000 - 49 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa4 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 4 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 99 --- Lifetime Power-On Resets +0x01 0x010 4 1063 --- Power-on Hours +0x01 0x018 6 270298671 --- Logical Sectors Written +0x01 0x028 6 103535697 --- Logical Sectors Read +0x01 0x038 6 1063 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 38 --- Current Temperature +0x05 0x010 1 34 --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 41 --- Highest Temperature +0x05 0x028 1 28 --- Lowest Temperature +0x05 0x030 1 37 --- Highest Average Short Term Temperature +0x05 0x038 1 37 --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 2 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/WDC/WDS250/WDS250G1B0A-00H9H0/A46BACCC9021 b/SSD/WDC/WDS250/WDS250G1B0A-00H9H0/A46BACCC9021 new file mode 100644 index 000000000..fbbb256c3 --- /dev/null +++ b/SSD/WDC/WDS250/WDS250G1B0A-00H9H0/A46BACCC9021 @@ -0,0 +1,162 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.4-RELEASE-p3 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS250G1B0A-00H9H0 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X41110WD +User Capacity: 250,059,350,016 bytes [250 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) +Local Time is: Mon Sep 14 22:14:07 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 15629 + 12 Power_Cycle_Count -O--CK 100 100 --- - 656 +165 Block_Erase_Count -O--CK 100 100 --- - 11327251430516 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 193 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 66 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 421 +169 Total_Bad_Blocks -O--CK 100 100 --- - 323 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 274 +174 Unexpected_Power_Loss -O--CK 100 100 --- - 20 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 1 +194 Temperature_Celsius -O---K 059 051 --- - 41 (Min/Max 9/51) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 63 +230 Media_Wearout_Indicator -O--CK 100 100 --- - 0x2c15270e2c15 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 65711 +234 NAND_GB_Written_SLC -O--CK 100 100 --- - 112702 +241 Host_Writes_GiB ----CK 253 253 --- - 45522 +242 Host_Reads_GiB ----CK 253 253 --- - 7684 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 12876 - +# 2 Extended offline Completed without error 00% 12708 - +# 3 Extended offline Completed without error 00% 12540 - +# 4 Extended offline Completed without error 00% 12372 - +# 5 Extended offline Completed without error 00% 12204 - +# 6 Extended offline Completed without error 00% 12036 - +# 7 Extended offline Completed without error 00% 11868 - +# 8 Extended offline Completed without error 00% 11700 - +# 9 Extended offline Completed without error 00% 11532 - +#10 Extended offline Completed without error 00% 11364 - +#11 Extended offline Completed without error 00% 11196 - +#12 Extended offline Completed without error 00% 11028 - +#13 Extended offline Completed without error 00% 10860 - +#14 Extended offline Completed without error 00% 10692 - +#15 Extended offline Completed without error 00% 10524 - +#16 Extended offline Completed without error 00% 10356 - +#17 Extended offline Completed without error 00% 10188 - +#18 Extended offline Completed without error 00% 10020 - +#19 Extended offline Completed without error 00% 9853 - + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 656 --- Lifetime Power-On Resets +0x01 0x010 4 10379 --- Power-on Hours +0x01 0x018 6 95467220201 --- Logical Sectors Written +0x01 0x020 6 2186775053 --- Number of Write Commands +0x01 0x028 6 16115056860 --- Logical Sectors Read +0x01 0x030 6 1715370834 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 39 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 3 Command failed due to ICRC error +0x0002 4 3 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 16 Device-to-host register FISes sent due to a COMRESET + diff --git a/SSD/WDC/WDS480/WDS480G2G0A-00JH30/66C774DFDC19 b/SSD/WDC/WDS480/WDS480G2G0A-00JH30/66C774DFDC19 new file mode 100644 index 000000000..fe122c1eb --- /dev/null +++ b/SSD/WDC/WDS480/WDS480G2G0A-00JH30/66C774DFDC19 @@ -0,0 +1,168 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS480G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UG220400 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jun 27 20:39:09 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 83) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 601 + 12 Power_Cycle_Count -O--CK 100 100 000 - 466 +165 Block_Erase_Count -O--CK 100 100 000 - 481 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 5 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 38 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 7 +169 Total_Bad_Blocks -O--CK 100 100 --- - 418 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 5 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 26 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 071 051 000 - 29 (Min/Max 9/51) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x012501000125 +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 2556 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 5957 +241 Host_Writes_GiB ----CK 100 100 000 - 2685 +242 Host_Reads_GiB ----CK 100 100 000 - 1255 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa4 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 4 Device vendor specific log + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 466 --- Lifetime Power-On Resets +0x01 0x010 4 601 --- Power-on Hours +0x01 0x018 6 5632245765 --- Logical Sectors Written +0x01 0x028 6 2633266204 --- Logical Sectors Read +0x01 0x038 6 601 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 29 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 50 --- Highest Temperature +0x05 0x028 1 15 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + + + diff --git a/SSD/WDC/WDS480/WDS480G2G0A-00JH30/6E4098FF7BB8 b/SSD/WDC/WDS480/WDS480G2G0A-00JH30/6E4098FF7BB8 new file mode 100644 index 000000000..2f791f57b --- /dev/null +++ b/SSD/WDC/WDS480/WDS480G2G0A-00JH30/6E4098FF7BB8 @@ -0,0 +1,317 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS480G2G0A-00JH30 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: UG220400 +User Capacity: 480,103,981,056 bytes [480 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Sat Jun 27 20:39:09 2020 -03 +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 120) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 83) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 + 9 Power_On_Hours -O--CK 100 100 000 - 634 + 12 Power_Cycle_Count -O--CK 100 100 000 - 466 +165 Block_Erase_Count -O--CK 100 100 000 - 400 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 4 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 20 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 6 +169 Total_Bad_Blocks -O--CK 100 100 --- - 264 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 000 - 0 +172 Erase_Fail_Count -O--CK 100 100 000 - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 4 +174 Unexpected_Power_Loss -O--CK 100 100 000 - 26 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 000 - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 068 053 000 - 32 (Min/Max 13/53) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x010e0050010e +232 Available_Reservd_Space PO--CK 100 100 005 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 2020 +234 NAND_GB_Written_SLC -O--CK 100 100 000 - 4955 +241 Host_Writes_GiB ----CK 100 100 000 - 2159 +242 Host_Reads_GiB ----CK 100 100 000 - 841 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 16 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xa1 GPL,SL VS 1 Device vendor specific log +0xa2 GPL,SL VS 2 Device vendor specific log +0xa3-0xa4 GPL,SL VS 1 Device vendor specific log +0xa7 GPL,SL VS 1 Device vendor specific log +0xa9 GPL,SL VS 4 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (16 sectors) +Device Error Count: 105 (device log contains only the most recent 64 errors) + CR = Command Register + FEATR = Features Register + COUNT = Count (was: Sector Count) Register + LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 + LH = LBA High (was: Cylinder High) Register ] LBA + LM = LBA Mid (was: Cylinder Low) Register ] Register + LL = LBA Low (was: Sector Number) Register ] + DV = Device (was: Device/Head) Register + DC = Device Control Register + ER = Error register + ST = Status register +Powered_Up_Time is measured from power on, and printed as +DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, +SS=sec, and sss=millisec. It "wraps" after 49.710 days. + +Error 105 [0] occurred at disk power-on lifetime: 43981 hours (1832 days + 13 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 15 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 14 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 13 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 12 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 11 3d+07:32:11.153 NOP [Abort queued commands] + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 104 [63] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 45 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 44 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 43 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 42 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 41 3d+07:32:11.153 NOP [Abort queued commands] + +Error 103 [62] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 35 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 34 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 33 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 32 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 31 3d+07:32:11.153 NOP [Abort queued commands] + +Error 102 [61] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 25 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 24 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 23 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 22 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 21 3d+07:32:11.153 NOP [Abort queued commands] + +Error 101 [60] occurred at disk power-on lifetime: 43981 hours (1832 days + 13 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 15 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 14 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 13 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 12 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 11 3d+07:32:11.153 NOP [Abort queued commands] + +Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. +Error 100 [59] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 45 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 44 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 43 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 42 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 41 3d+07:32:11.153 NOP [Abort queued commands] + +Error 99 [58] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 35 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 34 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 33 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 32 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 31 3d+07:32:11.153 NOP [Abort queued commands] + +Error 98 [57] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) + When the command that caused the error occurred, the device was in an unknown state. + + After command completion occurred, registers were: + ER -- ST COUNT LBA_48 LH LM LL DV DC + -- -- -- == -- == == == -- -- -- -- -- + 00 -- 00 00 00 00 00 00 00 00 00 00 00 + + Commands leading to the command that caused the error were: + CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name + -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- + 00 00 00 00 00 00 00 00 00 00 00 00 25 16d+13:40:55.765 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 24 13d+06:08:44.612 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 23 9d+22:36:33.459 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 22 6d+15:04:22.306 NOP [Abort queued commands] + 00 00 00 00 00 00 00 00 00 00 00 00 21 3d+07:32:11.153 NOP [Abort queued commands] + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 466 --- Lifetime Power-On Resets +0x01 0x010 4 634 --- Power-on Hours +0x01 0x018 6 4528030992 --- Logical Sectors Written +0x01 0x028 6 1764519423 --- Logical Sectors Read +0x01 0x038 6 634 --- Date and Time TimeStamp +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 32 --- Current Temperature +0x05 0x010 1 - --- Average Short Term Temperature +0x05 0x018 1 - --- Average Long Term Temperature +0x05 0x020 1 52 --- Highest Temperature +0x05 0x028 1 16 --- Lowest Temperature +0x05 0x030 1 - --- Highest Average Short Term Temperature +0x05 0x038 1 - --- Lowest Average Short Term Temperature +0x05 0x040 1 - --- Highest Average Long Term Temperature +0x05 0x048 1 - --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 95 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 1 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 3 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0001 2 0 Command failed due to ICRC error + diff --git a/SSD/WDC/WDS500/WDS500G2B0A-00SM50/1CC6CB6F8CD3 b/SSD/WDC/WDS500/WDS500G2B0A-00SM50/1CC6CB6F8CD3 new file mode 100644 index 000000000..da81a3f70 --- /dev/null +++ b/SSD/WDC/WDS500/WDS500G2B0A-00SM50/1CC6CB6F8CD3 @@ -0,0 +1,88 @@ +smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS500G2B0A-00SM50 +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: 401020WD +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Tue Oct 20 07:16:22 2020 NZDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 + 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 5373 + 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 39 +165 Block_Erase_Count 0x0032 100 100 --- Old_age Always - 12910710 +166 Minimum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 0 +167 Max_Bad_Blocks_per_Die 0x0032 100 100 --- Old_age Always - 71 +168 Maximum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 1 +169 Total_Bad_Blocks 0x0032 100 100 --- Old_age Always - 403 +170 Grown_Bad_Blocks 0x0032 100 100 --- Old_age Always - 0 +171 Program_Fail_Count 0x0032 100 100 --- Old_age Always - 0 +172 Erase_Fail_Count 0x0032 100 100 --- Old_age Always - 0 +173 Average_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 0 +174 Unexpected_Power_Loss 0x0032 100 100 --- Old_age Always - 14 +184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 +187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 +188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 +194 Temperature_Celsius 0x0022 069 044 --- Old_age Always - 31 (Min/Max 24/44) +199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 +230 Media_Wearout_Indicator 0x0032 001 001 --- Old_age Always - 0x001700000017 +232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100 +233 NAND_GB_Written_TLC 0x0032 100 100 --- Old_age Always - 117 +234 NAND_GB_Written_SLC 0x0032 100 100 --- Old_age Always - 1415 +241 Host_Writes_GiB 0x0030 253 253 --- Old_age Offline - 1373 +242 Host_Reads_GiB 0x0030 253 253 --- Old_age Offline - 97 +244 Temp_Throttle_Status 0x0032 000 100 --- Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + diff --git a/SSD/WDC/WDS500/WDS500G2B0A/282A1B488010 b/SSD/WDC/WDS500/WDS500G2B0A/282A1B488010 new file mode 100644 index 000000000..77ed534ef --- /dev/null +++ b/SSD/WDC/WDS500/WDS500G2B0A/282A1B488010 @@ -0,0 +1,145 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-STABLE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS500G2B0A +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X61190WD +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Tue Jul 21 03:11:52 2020 CEST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 5635 + 12 Power_Cycle_Count -O--CK 100 100 --- - 608 +165 Block_Erase_Count -O--CK 100 100 --- - 17190224001 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 49 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 7 +169 Total_Bad_Blocks -O--CK 100 100 --- - 369 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 2 +174 Unexpected_Power_Loss -O--CK 100 100 --- - 61 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 072 039 --- - 28 (Min/Max 17/39) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 --- - 0x001900140019 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 1087 +234 NAND_GB_Written_SLC -O--CK 100 100 --- - 1578 +241 Host_Writes_GiB ----CK 253 253 --- - 1433 +242 Host_Reads_GiB ----CK 253 253 --- - 463 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 608 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 3006246110 --- Logical Sectors Written +0x01 0x020 6 29658745 --- Number of Write Commands +0x01 0x028 6 971995242 --- Logical Sectors Read +0x01 0x030 6 36946003 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 5 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/WDC/WDS500/WDS500G2B0A/EF5676FEAA52 b/SSD/WDC/WDS500/WDS500G2B0A/EF5676FEAA52 new file mode 100644 index 000000000..ab612e531 --- /dev/null +++ b/SSD/WDC/WDS500/WDS500G2B0A/EF5676FEAA52 @@ -0,0 +1,145 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: WD Blue and Green SSDs +Device Model: WDC WDS500G2B0A +Serial Number: -- +LU WWN Device Id: 5 001b44 ... +Firmware Version: X61190WD +User Capacity: 500,107,862,016 bytes [500 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: In smartctl database [for details use: -P show] +ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 +SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Jul 27 17:18:59 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM level is: 128 (minimum power consumption without standby) +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 10) minutes. + +SMART Attributes Data Structure revision number: 4 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 + 9 Power_On_Hours -O--CK 100 100 --- - 368 + 12 Power_Cycle_Count -O--CK 100 100 --- - 32 +165 Block_Erase_Count -O--CK 100 100 --- - 983049 +166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 0 +167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 38 +168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 1 +169 Total_Bad_Blocks -O--CK 100 100 --- - 421 +170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 +171 Program_Fail_Count -O--CK 100 100 --- - 0 +172 Erase_Fail_Count -O--CK 100 100 --- - 0 +173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 0 +174 Unexpected_Power_Loss -O--CK 100 100 --- - 3 +184 End-to-End_Error -O--CK 100 100 --- - 0 +187 Reported_Uncorrect -O--CK 100 100 --- - 0 +188 Command_Timeout -O--CK 100 100 --- - 0 +194 Temperature_Celsius -O---K 071 031 --- - 29 (Min/Max 23/31) +199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 +230 Media_Wearout_Indicator -O--CK 100 100 --- - 0x000100000001 +232 Available_Reservd_Space PO--CK 100 100 004 - 100 +233 NAND_GB_Written_TLC -O--CK 100 100 --- - 33 +234 NAND_GB_Written_SLC -O--CK 100 100 --- - 117 +241 Host_Writes_GiB ----CK 253 253 --- - 156 +242 Host_Reads_GiB ----CK 253 253 --- - 33 +244 Temp_Throttle_Status -O--CK 000 100 --- - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 2 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xde GPL VS 8 Device vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 32 --- Lifetime Power-On Resets +0x01 0x010 4 0 --- Power-on Hours +0x01 0x018 6 327473767 --- Logical Sectors Written +0x01 0x020 6 9129260 --- Number of Write Commands +0x01 0x028 6 70044783 --- Logical Sectors Read +0x01 0x030 6 8455450 --- Number of Read Commands +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 4 0 Command failed due to ICRC error +0x0002 4 0 R_ERR response for data FIS +0x0005 4 0 R_ERR response for non-data FIS +0x000a 4 3 Device-to-host register FISes sent due to a COMRESET + + + diff --git a/SSD/ZTC/SM201/SM201-064G/FC57C5559A07 b/SSD/ZTC/SM201/SM201-064G/FC57C5559A07 new file mode 100644 index 000000000..dc0f36a45 --- /dev/null +++ b/SSD/ZTC/SM201/SM201-064G/FC57C5559A07 @@ -0,0 +1,182 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p8 amd64] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: ZTC-SM201-064G +Serial Number: -- +LU WWN Device Id: 5 000000 ... +Firmware Version: H180806 +User Capacity: 64,023,257,088 bytes [64.0 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Mon Sep 14 09:36:44 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Unavailable +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, NOT FROZEN [SEC1] +Wt Cache Reorder: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x02) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 33) seconds. +Offline data collection +capabilities: (0x7b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 2) minutes. +Conveyance self-test routine +recommended polling time: ( 2) minutes. +SCT capabilities: (0x0031) SCT Status supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 9 Power_On_Hours -O--C- 100 100 000 - 3943 + 12 Power_Cycle_Count -O--C- 100 100 000 - 26 +167 Unknown_Attribute -O---K 100 100 000 - 0 +168 Unknown_Attribute -O--C- 100 100 000 - 0 +169 Unknown_Attribute PO--C- 097 097 010 - 1179657 +171 Unknown_Attribute -O--CK 000 000 000 - 0 +172 Unknown_Attribute -O--CK 000 000 000 - 0 +173 Unknown_Attribute -O--C- 200 200 000 - 317832888396 +175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 +180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 832 +187 Reported_Uncorrect -O--CK 100 000 000 - 0 +192 Power-Off_Retract_Count -O--C- 100 100 000 - 26 +194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 10/50) +206 Unknown_SSD_Attribute -O--CK 200 200 000 - 74 +207 Unknown_SSD_Attribute -O--CK 200 200 000 - 81 +208 Unknown_SSD_Attribute -O--CK 200 200 000 - 76 +209 Unknown_SSD_Attribute -O--CK 200 200 000 - 17 +210 Unknown_Attribute -O--CK 200 200 000 - 839 +211 Unknown_Attribute -O--CK 200 200 000 - 581 +231 Temperature_Celsius PO---K 095 095 005 - 5 +241 Total_LBAs_Written -O--CK 100 100 000 - 2790270302 +242 Total_LBAs_Read -O--CK 100 100 000 - 1124280376 +245 Unknown_Attribute -O--CK 100 100 000 - 0 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 51 Comprehensive SMART error log +0x03 GPL R/O 64 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x80-0x9f GPL,SL R/W 16 Host vendor specific log +0xe0 GPL,SL R/W 1 SCT Command/Status +0xe1 GPL,SL R/W 1 SCT Data Transfer + +SMART Extended Comprehensive Error Log Version: 1 (64 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. + +SCT Status Version: 3 +SCT Version (vendor specific): 1 (0x0001) +Device State: Active (0) +Current Temperature: 30 Celsius +Power Cycle Min/Max Temperature: ?/30 Celsius +Lifetime Min/Max Temperature: ?/ ? Celsius +Under/Over Temperature Limit Count: 0/0 + +SCT Temperature History Version: 2 +Temperature Sampling Period: 1 minute +Temperature Logging Interval: 1 minute +Min/Max recommended Temperature: -127/127 Celsius +Min/Max Temperature Limit: -127/127 Celsius +Temperature History Size (Index): 478 (281) + +SCT Error Recovery Control command not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 26 --- Lifetime Power-On Resets +0x01 0x010 4 3943 --- Power-on Hours +0x01 0x018 6 2790270302 --- Logical Sectors Written +0x01 0x020 6 20602826 --- Number of Write Commands +0x01 0x028 6 1124280376 --- Logical Sectors Read +0x01 0x030 6 57228657 --- Number of Read Commands +0x01 0x038 6 3634854503328 --- Date and Time TimeStamp +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 11 N-- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 4 2 Device-to-host register FISes sent due to a COMRESET +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC + + + diff --git a/SSD/Zheino/CHN-mSATAQ3/CHN-mSATAQ3-120/35C29408CEBF b/SSD/Zheino/CHN-mSATAQ3/CHN-mSATAQ3-120/35C29408CEBF new file mode 100644 index 000000000..080a271f1 --- /dev/null +++ b/SSD/Zheino/CHN-mSATAQ3/CHN-mSATAQ3-120/35C29408CEBF @@ -0,0 +1,172 @@ +smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p6 i386] (local build) +Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: CHN-mSATAQ3-120 +Serial Number: -- +LU WWN Device Id: 0 000000 ... +Firmware Version: Q0707A +User Capacity: 120,034,123,776 bytes [120 GB] +Sector Size: 512 bytes logical/physical +Rotation Rate: Solid State Device +Form Factor: 2.5 inches +Device is: Not in smartctl database [for details use: -P showall] +ATA Version is: ACS-2 (minor revision not indicated) +SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) +Local Time is: Fri Aug 28 20:11:05 2020 EDT +SMART support is: Available - device has SMART capability. +SMART support is: Enabled +AAM feature is: Unavailable +APM feature is: Disabled +Rd look-ahead is: Enabled +Write cache is: Enabled +DSN feature is: Unavailable +ATA Security is: Disabled, frozen [SEC2] +Wt Cache Reorder: Unavailable + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x00) Offline data collection activity + was never started. + Auto Offline Data Collection: Disabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 0) seconds. +Offline data collection +capabilities: (0x11) SMART execute Offline immediate. + No Auto Offline data collection support. + Suspend Offline collection upon new + command. + No Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + No Selective Self-test supported. +SMART capabilities: (0x0002) Does not save SMART data before + entering power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 1) minutes. +Extended self-test routine +recommended polling time: ( 1) minutes. + +SMART Attributes Data Structure revision number: 1 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE + 1 Raw_Read_Error_Rate ------ 100 100 050 - 0 + 5 Reallocated_Sector_Ct -O---- 100 100 050 - 0 + 9 Power_On_Hours ------ 100 100 050 - 4 + 12 Power_Cycle_Count ------ 100 100 050 - 16 +160 Unknown_Attribute ------ 100 100 050 - 0 +161 Unknown_Attribute ------ 100 100 050 - 50 +162 Unknown_Attribute ------ 100 100 050 - 1 +163 Unknown_Attribute ------ 100 100 050 - 6 +164 Unknown_Attribute ------ 100 100 050 - 332 +165 Unknown_Attribute ------ 100 100 050 - 1 +166 Unknown_Attribute ------ 100 100 050 - 0 +167 Unknown_Attribute ------ 100 100 050 - 0 +168 Unknown_Attribute ------ 100 100 050 - 3000 +169 Unknown_Attribute ------ 100 100 050 - 100 +192 Power-Off_Retract_Count ------ 100 100 050 - 9 +194 Temperature_Celsius ------ 100 100 050 - 44 +195 Hardware_ECC_Recovered ------ 100 100 050 - 4 +196 Reallocated_Event_Count ------ 100 100 050 - 0 +199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 +241 Total_LBAs_Written ------ 100 100 050 - 2099 +242 Total_LBAs_Read ------ 100 100 050 - 2338 +245 Unknown_Attribute ------ 100 100 050 - 2271 + ||||||_ K auto-keep + |||||__ C event count + ||||___ R error rate + |||____ S speed/performance + ||_____ O updated online + |______ P prefailure warning + +General Purpose Log Directory Version 1 +SMART Log Directory Version 1 [multi-sector log support] +Address Access R/W Size Description +0x00 GPL,SL R/O 1 Log Directory +0x01 SL R/O 1 Summary SMART error log +0x02 SL R/O 1 Comprehensive SMART error log +0x03 GPL R/O 1 Ext. Comprehensive SMART error log +0x04 GPL,SL R/O 8 Device Statistics log +0x06 SL R/O 1 SMART self-test log +0x07 GPL R/O 1 Extended self-test log +0x09 SL R/W 1 Selective self-test log +0x10 GPL R/O 1 NCQ Command Error log +0x11 GPL R/O 1 SATA Phy Event Counters log +0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log +0x31 GPL - 4 Reserved +0x80-0x9f GPL,SL R/W 16 Host vendor specific log + +SMART Extended Comprehensive Error Log Version: 1 (1 sectors) +No Errors Logged + +SMART Extended Self-test Log Version: 1 (1 sectors) +No self-tests have been logged. [To run self-tests, use: smartctl -t] + +Selective Self-tests/Logging not supported + +SCT Commands not supported + +Device Statistics (GP Log 0x04) +Page Offset Size Value Flags Description +0x01 ===== = = === == General Statistics (rev 1) == +0x01 0x008 4 16 --- Lifetime Power-On Resets +0x01 0x010 4 4 --- Power-on Hours +0x01 0x018 6 137579324 --- Logical Sectors Written +0x01 0x020 6 3026283 --- Number of Write Commands +0x01 0x028 6 153255025 --- Logical Sectors Read +0x01 0x030 6 4182136 --- Number of Read Commands +0x04 ===== = = === == General Errors Statistics (rev 1) == +0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors +0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion +0x05 ===== = = === == Temperature Statistics (rev 1) == +0x05 0x008 1 44 --- Current Temperature +0x05 0x010 1 12 --- Average Short Term Temperature +0x05 0x018 1 49 --- Average Long Term Temperature +0x05 0x020 1 48 --- Highest Temperature +0x05 0x028 1 22 --- Lowest Temperature +0x05 0x030 1 34 --- Highest Average Short Term Temperature +0x05 0x038 1 0 --- Lowest Average Short Term Temperature +0x05 0x040 1 49 --- Highest Average Long Term Temperature +0x05 0x048 1 2 --- Lowest Average Long Term Temperature +0x05 0x050 4 0 --- Time in Over-Temperature +0x05 0x058 1 100 --- Specified Maximum Operating Temperature +0x05 0x060 4 0 --- Time in Under-Temperature +0x05 0x068 1 0 --- Specified Minimum Operating Temperature +0x06 ===== = = === == Transport Statistics (rev 1) == +0x06 0x008 4 31 --- Number of Hardware Resets +0x06 0x018 4 0 --- Number of Interface CRC Errors +0x07 ===== = = === == Solid State Device Statistics (rev 1) == +0x07 0x008 1 0 --- Percentage Used Endurance Indicator + |||_ C monitored condition met + ||__ D supports DSN + |___ N normalized value + +Pending Defects log (GP Log 0x0c) not supported + +SATA Phy Event Counters (GP Log 0x11) +ID Size Value Description +0x0001 2 0 Command failed due to ICRC error +0x0002 2 0 R_ERR response for data FIS +0x0003 2 0 R_ERR response for device-to-host data FIS +0x0004 2 0 R_ERR response for host-to-device data FIS +0x0005 2 0 R_ERR response for non-data FIS +0x0006 2 0 R_ERR response for device-to-host non-data FIS +0x0007 2 0 R_ERR response for host-to-device non-data FIS +0x0008 2 0 Device-to-host non-data FIS retries +0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy +0x000a 2 1 Device-to-host register FISes sent due to a COMRESET +0x000b 2 0 CRC errors within host-to-device FIS +0x000d 2 0 Non-CRC errors within host-to-device FIS +0x000f 2 0 R_ERR response for host-to-device data FIS, CRC +0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC +0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC +0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC +