80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 1329, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2023-05-01 22:53:35 +03:00
parent 52e1a865b7
commit 6760e6c317
1329 changed files with 215727 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

267
HDD/Samsung/HS08/HS08XJC/B339885F67B9 Normal file
View File

@@ -0,0 +1,267 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HS08XJC
Serial Number: --
Firmware Version: GR100-05
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7, ATA/ATAPI-6 T13/1410D revision 1
Local Time is: Sat Mar 11 22:04:45 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 128 (quiet), recommended: 254
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x59) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 55) minutes.
SMART Attributes Data Structure revision number: 4
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
3 Spin_Up_Time POS--- 095 091 025 - 1792
4 Start_Stop_Count -O--CK 100 100 000 - 2777
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 174
12 Power_Cycle_Count -O--CK 100 100 000 - 55
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1005
192 Power-Off_Retract_Count -O--CK 100 100 000 - 230
194 Temperature_Celsius -O---K 151 118 000 - 29 (Min/Max 15/40)
196 Reallocated_Event_Count -O--CK 100 100 000 - 169
197 Current_Pending_Sector -O--CK 094 094 000 - 16926260
198 Offline_Uncorrectable -O--CK 099 099 000 - 3037498
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1259577
200 Multi_Zone_Error_Rate -O--CK 100 100 000 - 1653772
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x80 GPL,SL R/W 16 Host vendor specific log
0xbb GPL,SL VS 4 Device vendor specific log
0xbc GPL,SL VS 2 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 158 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 158 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 50 00 08 00 00 00 b0 42 f8 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 01 00 00 00 00 00 01 a0 02 00:00:25.986 NOP [Abort queued commands]
c8 00 00 00 08 00 00 00 b0 42 f8 e0 00 00:00:23.899 READ DMA
c8 00 00 00 08 00 00 00 af fe 90 e0 00 00:00:23.463 READ DMA
c8 00 00 00 40 00 00 00 0b 8d 88 e1 00 00:00:23.346 READ DMA
c8 00 00 00 08 00 00 00 ae f8 e0 e0 00 00:00:23.321 READ DMA
Error 157 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 01 00 00 00 00 00 01 a0 00 00:00:01.792 NOP [Abort queued commands]
ca 00 00 00 08 00 00 00 b0 43 d8 e0 00 00:17:27.059 WRITE DMA
ca 00 00 00 08 00 00 00 88 f0 50 e0 00 00:17:27.059 WRITE DMA
ca 00 00 00 18 00 00 00 68 91 c0 e0 00 00:17:27.057 WRITE DMA
ca 00 00 00 08 00 00 00 68 91 a8 e0 00 00:17:27.056 WRITE DMA
Error 156 [3] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 50 00 40 00 00 00 28 45 c0 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 01 00 00 00 00 00 01 a0 0a 02:28:39.811 NOP [Abort queued commands]
c8 00 00 00 40 00 00 00 28 45 c0 e0 00 02:28:36.059 READ DMA
c8 00 00 00 40 00 00 00 28 45 80 e0 00 02:28:36.058 READ DMA
c8 00 00 00 40 00 00 00 28 45 40 e0 00 02:28:36.056 READ DMA
c8 00 00 00 40 00 00 00 28 45 00 e0 00 02:28:36.055 READ DMA
Error 155 [2] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 50 00 00 00 00 00 14 f6 3f a0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 01 00 00 00 00 00 01 a0 00 02:28:05.045 NOP [Abort queued commands]
e7 00 00 00 00 00 00 00 14 f6 3f a0 08 02:28:04.125 FLUSH CACHE
c8 00 00 00 20 00 00 00 14 f6 20 e1 08 02:28:04.078 READ DMA
c8 00 00 00 08 00 00 00 56 c2 f0 e0 08 02:28:04.058 READ DMA
c8 00 00 00 08 00 00 00 a4 f7 88 e0 08 02:28:04.040 READ DMA
Error 154 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 50 00 40 00 00 00 28 45 c0 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 01 00 00 00 00 00 01 a0 0a 00:00:36.249 NOP [Abort queued commands]
c8 00 00 00 40 00 00 00 28 45 c0 e0 00 00:00:32.495 READ DMA
c8 00 00 00 40 00 00 00 28 45 80 e0 00 00:00:32.494 READ DMA
c8 00 00 00 40 00 00 00 28 45 40 e0 00 00:00:32.492 READ DMA
c8 00 00 00 40 00 00 00 28 45 00 e0 00 00:00:32.491 READ DMA
Error 153 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 01 00 00 00 00 00 01 a0 00 00:00:02.298 NOP [Abort queued commands]
c8 00 00 00 08 00 00 00 60 f9 00 e4 08 00:04:14.759 READ DMA
c8 00 00 00 08 00 00 00 61 0a 30 e4 08 00:04:14.754 READ DMA
c8 00 00 00 08 00 00 00 61 0d 90 e4 08 00:04:14.745 READ DMA
c8 00 00 00 08 00 00 00 61 09 e8 e4 08 00:04:14.728 READ DMA
Error 152 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 50 00 40 00 00 00 c9 2b 00 e5 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 01 00 00 00 00 00 01 a0 0a 00:00:50.724 NOP [Abort queued commands]
c8 00 00 00 40 00 00 00 c9 2b 00 e5 00 00:00:48.673 READ DMA
c8 00 00 00 40 00 00 00 c9 2a c0 e5 00 00:00:48.672 READ DMA
c8 00 00 00 40 00 00 00 c9 2a 80 e5 00 00:00:48.671 READ DMA
c8 00 00 00 40 00 00 00 c9 2a 40 e5 00 00:00:48.670 READ DMA
Error 151 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 01 00 00 00 00 00 01 a0 00 00:00:02.325 NOP [Abort queued commands]
73 7f ff 7f ee 7f ff 2f af 7c 7f fb 3d 49d+12:23:01.299 SEEK [RET-4]
fb f5 ff ef dd e7 ff fb f5 bf b7 ff fe 12d+07:55:49.023 [VENDOR SPECIFIC]
ff ff bd cf eb ff fc 5e b3 de 7e d9 fe 49d+07:43:32.863 [VENDOR SPECIFIC]
fe ee ff cf bb df ff fb ff ff db fb 7e 49d+16:27:29.407 [VENDOR SPECIFIC]
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported