mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 1329, modified: 0)
This commit is contained in:
Andrey Ponomarenko
108
HDD/Seagate/ST750/ST750LM022 HN-M750MBB/FAC481EBEF22
Normal file
108
HDD/Seagate/ST750/ST750LM022 HN-M750MBB/FAC481EBEF22
Normal file
@@ -0,0 +1,108 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [NetBSD 9.3 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Model Family: Seagate Samsung SpinPoint M8 (AF)
|
||||
Device Model: ST750LM022 HN-M750MBB
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 5 0004cf ...
|
||||
Firmware Version: 2BA30001
|
||||
User Capacity: 750,156,374,016 bytes [750 GB]
|
||||
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
||||
Rotation Rate: 5400 rpm
|
||||
Form Factor: 2.5 inches
|
||||
Device is: In smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
|
||||
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Fri Apr 21 13:22:39 2023 CDT
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 9660) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x51) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Suspend Offline collection upon new
|
||||
command.
|
||||
No Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||||
power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 161) minutes.
|
||||
SCT capabilities: (0x003d) SCT Status supported.
|
||||
SCT Error Recovery Control supported.
|
||||
SCT Feature Control supported.
|
||||
SCT Data Table supported.
|
||||
|
||||
SMART Attributes Data Structure revision number: 16
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||||
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 3
|
||||
2 Throughput_Performance 0x0027 252 252 000 Pre-fail Always - 0
|
||||
3 Spin_Up_Time 0x0023 092 091 025 Pre-fail Always - 2611
|
||||
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1460
|
||||
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
|
||||
7 Seek_Error_Rate 0x002f 252 252 051 Pre-fail Always - 0
|
||||
8 Seek_Time_Performance 0x0025 252 252 015 Pre-fail Offline - 0
|
||||
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1929
|
||||
10 Spin_Retry_Count 0x0033 252 252 051 Pre-fail Always - 0
|
||||
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 161
|
||||
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1474
|
||||
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 1392540
|
||||
183 Runtime_Bad_Block 0x0032 252 252 010 Old_age Always - 0
|
||||
184 End-to-End_Error 0x0033 085 085 048 Pre-fail Always - 16
|
||||
186 Unknown_Attribute 0x0032 252 252 000 Old_age Always - 0
|
||||
187 Reported_Uncorrect 0x0032 252 252 000 Old_age Always - 0
|
||||
188 Command_Timeout 0x0032 252 252 000 Old_age Always - 0
|
||||
190 Airflow_Temperature_Cel 0x0002 070 054 040 Old_age Always - 30 (Min/Max 14/46)
|
||||
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 236
|
||||
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
|
||||
193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 26569
|
||||
194 Temperature_Celsius 0x0002 064 054 000 Old_age Always - 30 (Min/Max 14/46)
|
||||
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
|
||||
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
|
||||
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
|
||||
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
|
||||
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
|
||||
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3740
|
||||
|
||||
SMART Error Log Version: 1
|
||||
No Errors Logged
|
||||
|
||||
SMART Self-test log structure revision number 1
|
||||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||||
# 1 Short offline Completed without error 00% 564 -
|
||||
# 2 Short offline Completed without error 00% 454 -
|
||||
# 3 Short offline Completed without error 00% 383 -
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Completed [00% left] (0-65535)
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
Reference in New Issue
Block a user