80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 1329, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2023-05-01 22:53:35 +03:00
parent 52e1a865b7
commit 6760e6c317
1329 changed files with 215727 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

321
HDD/Toshiba/MK1665/MK1665GSX/E626B10E4438 Normal file
View File

@@ -0,0 +1,321 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..65GSX
Device Model: TOSHIBA MK1665GSX
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: GJ002J
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Mar 24 20:12:06 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1197
4 Start_Stop_Count -O--CK 100 100 000 - 4547
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 12
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 069 069 000 - 12637
10 Spin_Retry_Count PO--CK 190 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 3143
191 G-Sense_Error_Rate -O--CK 100 100 000 - 352
192 Power-Off_Retract_Count -O--CK 100 100 000 - 158
193 Load_Cycle_Count -O--CK 092 092 000 - 82407
194 Temperature_Celsius -O---K 100 100 000 - 32 (Min/Max 12/53)
196 Reallocated_Event_Count -O--CK 100 100 000 - 9
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 77
222 Loaded_Hours -O--CK 092 092 000 - 3486
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 334
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 66
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 66 [65] occurred at disk power-on lifetime: 6693 hours (278 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 82 00 00 11 b4 0c 11 61 00 Error: UNC at LBA = 0x11b40c11 = 297012241
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 80 00 00 11 b4 0c 10 40 08 01:40:40.042 READ FPDMA QUEUED
60 00 08 00 78 00 00 11 b4 0c 00 40 08 01:40:40.042 READ FPDMA QUEUED
60 00 08 00 70 00 00 11 b4 0c 08 40 08 01:40:40.041 READ FPDMA QUEUED
60 00 08 00 68 00 00 11 b4 0b f8 40 08 01:40:40.041 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:40:40.041 FLUSH CACHE EXT
Error 65 [64] occurred at disk power-on lifetime: 6693 hours (278 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 6a 00 00 11 b4 0c 11 61 00 Error: UNC at LBA = 0x11b40c11 = 297012241
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 68 00 00 11 b4 0b b0 40 08 01:40:32.126 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:40:32.126 FLUSH CACHE EXT
60 00 40 00 50 00 00 11 b4 91 58 40 08 01:40:32.099 READ FPDMA QUEUED
61 00 08 00 48 00 00 0e b4 64 70 40 08 01:40:32.099 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:40:32.077 FLUSH CACHE EXT
Error 64 [63] occurred at disk power-on lifetime: 6662 hours (277 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 ea 00 00 11 b4 0c 11 61 00 Error: UNC at LBA = 0x11b40c11 = 297012241
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 e8 00 00 11 b4 0c 10 40 08 01:25:21.983 READ FPDMA QUEUED
61 00 20 00 e0 00 00 0e 34 82 00 40 08 01:25:19.795 WRITE FPDMA QUEUED
61 00 10 00 d8 00 00 0e 31 09 b0 40 08 01:25:19.795 WRITE FPDMA QUEUED
61 00 10 00 d0 00 00 0e 30 f7 70 40 08 01:25:19.794 WRITE FPDMA QUEUED
60 00 28 00 c8 00 00 0e 94 1d b0 40 08 01:25:17.517 READ FPDMA QUEUED
Error 63 [62] occurred at disk power-on lifetime: 6662 hours (277 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 ca 00 00 11 b4 0c 11 61 00 Error: UNC at LBA = 0x11b40c11 = 297012241
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 c8 00 00 11 b4 0c 10 40 08 01:25:12.294 READ FPDMA QUEUED
60 00 08 00 c0 00 00 11 f4 f7 18 40 08 01:25:11.139 READ FPDMA QUEUED
61 00 08 00 b8 00 00 0f 33 dc d0 40 08 01:25:09.972 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:25:09.717 FLUSH CACHE EXT
61 00 08 00 a8 00 00 0e b4 c1 f8 40 08 01:25:09.717 WRITE FPDMA QUEUED
Error 62 [61] occurred at disk power-on lifetime: 6662 hours (277 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 32 00 00 11 b4 0c 11 61 00 Error: UNC at LBA = 0x11b40c11 = 297012241
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 30 00 00 11 b4 0c 10 40 08 01:21:13.666 READ FPDMA QUEUED
61 00 08 00 28 00 00 0f 33 f6 c8 40 08 01:21:12.543 WRITE FPDMA QUEUED
61 00 08 00 20 00 00 0f 33 d7 a8 40 08 01:21:12.288 WRITE FPDMA QUEUED
61 00 08 00 18 00 00 0f 33 f6 c0 40 08 01:21:12.032 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:21:08.897 FLUSH CACHE EXT
Error 61 [60] occurred at disk power-on lifetime: 6661 hours (277 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 ba 00 00 11 b4 0c 11 61 00 Error: UNC at LBA = 0x11b40c11 = 297012241
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 b8 00 00 11 b4 0c 10 40 08 01:03:04.315 READ FPDMA QUEUED
60 00 50 00 b0 00 00 11 e1 af 08 40 08 01:03:02.134 READ FPDMA QUEUED
60 00 88 00 a8 00 00 11 e1 af 58 40 08 01:03:02.130 READ FPDMA QUEUED
60 00 20 00 a0 00 00 11 e1 ae e8 40 08 01:03:02.118 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:03:02.089 FLUSH CACHE EXT
Error 60 [59] occurred at disk power-on lifetime: 6661 hours (277 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 f2 00 00 11 b4 0c 11 61 00 Error: UNC at LBA = 0x11b40c11 = 297012241
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 f0 00 00 11 b4 0c 10 40 08 01:02:55.644 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:02:55.633 FLUSH CACHE EXT
60 00 08 00 d8 00 00 11 b4 0c 00 40 08 01:02:55.632 READ FPDMA QUEUED
61 00 08 00 d0 00 00 0e b2 5c c8 40 08 01:02:55.632 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:02:55.586 FLUSH CACHE EXT
Error 59 [58] occurred at disk power-on lifetime: 6661 hours (277 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 da 00 00 11 b4 0c 11 61 00 Error: UNC at LBA = 0x11b40c11 = 297012241
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 d8 00 00 11 b4 0b b0 40 08 01:02:47.435 READ FPDMA QUEUED
60 00 40 00 d0 00 00 11 b4 91 58 40 08 01:02:47.431 READ FPDMA QUEUED
61 00 10 00 c8 00 00 0e 34 74 c0 40 08 01:02:44.318 WRITE FPDMA QUEUED
61 00 08 00 c0 00 00 0e 32 fc 90 40 08 01:02:44.318 WRITE FPDMA QUEUED
61 00 60 00 b8 00 00 0e 31 09 00 40 08 01:02:44.318 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 28/34 Celsius
Lifetime Min/Max Temperature: 12/53 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (113)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC