Update of reports (new: 1329, modified: 0)

2025-05-31 16:21:41 +05:30 · 2023-05-01 22:53:35 +03:00
parent 52e1a865b7
commit 6760e6c317
1329 changed files with 215727 additions and 0 deletions
--- a/SM0512G/60625545D7E2
+++ b/SM0512G/60625545D7E2
@@ -0,0 +1,90 @@
+smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.2 amd64] (local build)
+Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
+
+=== START OF INFORMATION SECTION ===
+Model Family:     Apple SD/SM/TS...E/F/G SSDs
+Device Model:     APPLE SSD SM0512G
+Serial Number:    --
+LU WWN Device Id: 5 002538 ...
+Firmware Version: BXZ13A0Q
+User Capacity:    500,277,790,720 bytes [500 GB]
+Sector Sizes:     512 bytes logical, 4096 bytes physical
+Rotation Rate:    Solid State Device
+TRIM Command:     Available
+Device is:        In smartctl database 7.3/5319
+ATA Version is:   ATA8-ACS T13/1699-D revision 4c
+SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
+Local Time is:    Sun Apr 16 12:58:44 2023 CEST
+SMART support is: Available - device has SMART capability.
+SMART support is: Enabled
+
+=== START OF READ SMART DATA SECTION ===
+SMART Status not supported: Incomplete response, ATA output registers missing
+SMART overall-health self-assessment test result: PASSED
+Warning: This result is based on an Attribute check.
+
+General SMART Values:
+Offline data collection status:  (0x00)	Offline data collection activity
+					was never started.
+					Auto Offline Data Collection: Disabled.
+Self-test execution status:      (   0)	The previous self-test routine completed
+					without error or no self-test has ever 
+					been run.
+Total time to complete Offline 
+data collection: 		(    0) seconds.
+Offline data collection
+capabilities: 			 (0x53) SMART execute Offline immediate.
+					Auto Offline data collection on/off support.
+					Suspend Offline collection upon new
+					command.
+					No Offline surface scan supported.
+					Self-test supported.
+					No Conveyance Self-test supported.
+					Selective Self-test supported.
+SMART capabilities:            (0x0003)	Saves SMART data before entering
+					power-saving mode.
+					Supports SMART auto save timer.
+Error logging capability:        (0x01)	Error logging supported.
+					General Purpose Logging supported.
+Short self-test routine 
+recommended polling time: 	 (   2) minutes.
+Extended self-test routine
+recommended polling time: 	 (  10) minutes.
+
+SMART Attributes Data Structure revision number: 1
+Vendor Specific SMART Attributes with Thresholds:
+ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
+  1 Raw_Read_Error_Rate     0x001a   200   200   000    Old_age   Always       -       0
+  5 Reallocated_Sector_Ct   0x0033   100   100   000    Pre-fail  Always       -       0
+  9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       -       30733
+ 12 Power_Cycle_Count       0x0032   061   061   000    Old_age   Always       -       39123
+169 Unknown_Apple_Attrib    0x0013   253   253   010    Pre-fail  Always       -       2890663987072
+173 Wear_Leveling_Count     0x0032   168   168   100    Old_age   Always       -       3131094270744
+174 Host_Reads_MiB          0x0022   099   099   000    Old_age   Always       -       193144828
+175 Host_Writes_MiB         0x0022   099   099   000    Old_age   Always       -       201287113
+192 Power-Off_Retract_Count 0x0012   099   099   000    Old_age   Always       -       143
+194 Temperature_Celsius     0x0022   074   023   000    Old_age   Always       -       26 (Min/Max 13/77)
+197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
+199 UDMA_CRC_Error_Count    0x001a   200   200   000    Old_age   Always       -       0
+
+SMART Error Log Version: 1
+No Errors Logged
+
+SMART Self-test log structure revision number 1
+No self-tests have been logged.  [To run self-tests, use: smartctl -t]
+
+Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
+SMART Selective self-test log data structure revision number 1
+ SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
+    1        0        0  Not_testing
+    2        0        0  Not_testing
+    3        0        0  Not_testing
+    4        0        0  Not_testing
+    5        0        0  Not_testing
+  255        0    65535  Read_scanning was never started
+Selective self-test flags (0x0):
+  After scanning selected spans, do NOT read-scan remainder of disk.
+If Selective self-test is pending on power-up, resume after 0 minute delay.
+
+
+