mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
Update of reports (new: 1329, modified: 0)
This commit is contained in:
209
SSD/BAITITON/BT58/BT58SSD08M/1CE1E6B33E43
Normal file
209
SSD/BAITITON/BT58/BT58SSD08M/1CE1E6B33E43
Normal file
@@ -0,0 +1,209 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: BT58SSD08M
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 0 000000 ...
|
||||
Firmware Version: HPS2274P
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Thu Apr 6 09:54:41 2023 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5d) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 4) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 63
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 3
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 52
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 237
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 8961
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 2
|
||||
194 Temperature_Celsius -O--CK 100 100 050 - 40
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written -O--CK 100 100 050 - 925
|
||||
242 Total_LBAs_Read -O--CK 100 100 050 - 26
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 1667
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 16 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 3 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 63 --- Power-on Hours
|
||||
0x01 0x018 6 60620800 --- Logical Sectors Written
|
||||
0x01 0x020 6 3031421 --- Number of Write Commands
|
||||
0x01 0x028 6 1703936 --- Logical Sectors Read
|
||||
0x01 0x030 6 76483 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 3 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 63 --- Power-on Hours
|
||||
0x01 0x018 6 60620800 --- Logical Sectors Written
|
||||
0x01 0x020 6 3031421 --- Number of Write Commands
|
||||
0x01 0x028 6 1703936 --- Logical Sectors Read
|
||||
0x01 0x030 6 76483 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 3 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 63 --- Power-on Hours
|
||||
0x01 0x018 6 60620800 --- Logical Sectors Written
|
||||
0x01 0x020 6 3031421 --- Number of Write Commands
|
||||
0x01 0x028 6 1703936 --- Logical Sectors Read
|
||||
0x01 0x030 6 76483 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 3 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 63 --- Power-on Hours
|
||||
0x01 0x018 6 60620800 --- Logical Sectors Written
|
||||
0x01 0x020 6 3031421 --- Number of Write Commands
|
||||
0x01 0x028 6 1703936 --- Logical Sectors Read
|
||||
0x01 0x030 6 76483 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 3 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 63 --- Power-on Hours
|
||||
0x01 0x018 6 60620800 --- Logical Sectors Written
|
||||
0x01 0x020 6 3031421 --- Number of Write Commands
|
||||
0x01 0x028 6 1703936 --- Logical Sectors Read
|
||||
0x01 0x030 6 76483 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 3 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 63 --- Power-on Hours
|
||||
0x01 0x018 6 60620800 --- Logical Sectors Written
|
||||
0x01 0x020 6 3031421 --- Number of Write Commands
|
||||
0x01 0x028 6 1703936 --- Logical Sectors Read
|
||||
0x01 0x030 6 76483 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 3 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 63 --- Power-on Hours
|
||||
0x01 0x018 6 60620800 --- Logical Sectors Written
|
||||
0x01 0x020 6 3031421 --- Number of Write Commands
|
||||
0x01 0x028 6 1703936 --- Logical Sectors Read
|
||||
0x01 0x030 6 76483 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 3 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 63 --- Power-on Hours
|
||||
0x01 0x018 6 60620800 --- Logical Sectors Written
|
||||
0x01 0x020 6 3031421 --- Number of Write Commands
|
||||
0x01 0x028 6 1703936 --- Logical Sectors Read
|
||||
0x01 0x030 6 76483 --- Number of Read Commands
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 17 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
|
209
SSD/BAITITON/BT58/BT58SSD08M/288A8A83C421
Normal file
209
SSD/BAITITON/BT58/BT58SSD08M/288A8A83C421
Normal file
@@ -0,0 +1,209 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: BT58SSD08M
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 0 000000 ...
|
||||
Firmware Version: HC1A252P
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Tue Mar 7 18:26:46 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5d) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 4) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 4114
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 49
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 9
|
||||
161 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 154
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 833
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 46
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 1
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 6
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 28460
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 297219
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 6
|
||||
194 Temperature_Celsius -O--CK 100 100 050 - 40
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written -O--CK 100 100 050 - 70725
|
||||
242 Total_LBAs_Read -O--CK 100 100 050 - 1357
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 89420
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 16 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 4114 --- Power-on Hours
|
||||
0x01 0x018 6 4635033600 --- Logical Sectors Written
|
||||
0x01 0x020 6 68268087 --- Number of Write Commands
|
||||
0x01 0x028 6 88932352 --- Logical Sectors Read
|
||||
0x01 0x030 6 2768004 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 4114 --- Power-on Hours
|
||||
0x01 0x018 6 4635033600 --- Logical Sectors Written
|
||||
0x01 0x020 6 68268087 --- Number of Write Commands
|
||||
0x01 0x028 6 88932352 --- Logical Sectors Read
|
||||
0x01 0x030 6 2768004 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 4114 --- Power-on Hours
|
||||
0x01 0x018 6 4635033600 --- Logical Sectors Written
|
||||
0x01 0x020 6 68268087 --- Number of Write Commands
|
||||
0x01 0x028 6 88932352 --- Logical Sectors Read
|
||||
0x01 0x030 6 2768004 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 4114 --- Power-on Hours
|
||||
0x01 0x018 6 4635033600 --- Logical Sectors Written
|
||||
0x01 0x020 6 68268087 --- Number of Write Commands
|
||||
0x01 0x028 6 88932352 --- Logical Sectors Read
|
||||
0x01 0x030 6 2768004 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 4114 --- Power-on Hours
|
||||
0x01 0x018 6 4635033600 --- Logical Sectors Written
|
||||
0x01 0x020 6 68268087 --- Number of Write Commands
|
||||
0x01 0x028 6 88932352 --- Logical Sectors Read
|
||||
0x01 0x030 6 2768004 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 4114 --- Power-on Hours
|
||||
0x01 0x018 6 4635033600 --- Logical Sectors Written
|
||||
0x01 0x020 6 68268087 --- Number of Write Commands
|
||||
0x01 0x028 6 88932352 --- Logical Sectors Read
|
||||
0x01 0x030 6 2768004 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 4114 --- Power-on Hours
|
||||
0x01 0x018 6 4635033600 --- Logical Sectors Written
|
||||
0x01 0x020 6 68268087 --- Number of Write Commands
|
||||
0x01 0x028 6 88932352 --- Logical Sectors Read
|
||||
0x01 0x030 6 2768004 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 49 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 4114 --- Power-on Hours
|
||||
0x01 0x018 6 4635033600 --- Logical Sectors Written
|
||||
0x01 0x020 6 68268087 --- Number of Write Commands
|
||||
0x01 0x028 6 88932352 --- Logical Sectors Read
|
||||
0x01 0x030 6 2768004 --- Number of Read Commands
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0009 4 62 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 122 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
|
209
SSD/BAITITON/BT58/BT58SSD08M/954DEA0D743C
Normal file
209
SSD/BAITITON/BT58/BT58SSD08M/954DEA0D743C
Normal file
@@ -0,0 +1,209 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: BT58SSD08M
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 0 000000 ...
|
||||
Firmware Version: 20112PmS
|
||||
User Capacity: 128,035,676,160 bytes [128 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
||||
Local Time is: Sat Apr 29 02:31:37 2023 CEST
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5d) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 4) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 11454
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 4
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 2
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 555
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 606
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 500
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 529
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 4852141
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 16733575
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 2
|
||||
194 Temperature_Celsius -O--CK 100 100 050 - 40
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 13670
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 0
|
||||
241 Total_LBAs_Written -O--CK 100 100 050 - 401859
|
||||
242 Total_LBAs_Read -O--CK 100 100 050 - 263
|
||||
249 Unknown_Attribute -O--CK 100 100 050 - 440209
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 16 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 4 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 11454 --- Power-on Hours
|
||||
0x01 0x018 6 26336231424 --- Logical Sectors Written
|
||||
0x01 0x020 6 910894807 --- Number of Write Commands
|
||||
0x01 0x028 6 17235968 --- Logical Sectors Read
|
||||
0x01 0x030 6 1024049 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 4 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 11454 --- Power-on Hours
|
||||
0x01 0x018 6 26336231424 --- Logical Sectors Written
|
||||
0x01 0x020 6 910894807 --- Number of Write Commands
|
||||
0x01 0x028 6 17235968 --- Logical Sectors Read
|
||||
0x01 0x030 6 1024049 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 4 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 11454 --- Power-on Hours
|
||||
0x01 0x018 6 26336231424 --- Logical Sectors Written
|
||||
0x01 0x020 6 910894807 --- Number of Write Commands
|
||||
0x01 0x028 6 17235968 --- Logical Sectors Read
|
||||
0x01 0x030 6 1024049 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 4 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 11454 --- Power-on Hours
|
||||
0x01 0x018 6 26336231424 --- Logical Sectors Written
|
||||
0x01 0x020 6 910894807 --- Number of Write Commands
|
||||
0x01 0x028 6 17235968 --- Logical Sectors Read
|
||||
0x01 0x030 6 1024049 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 4 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 11454 --- Power-on Hours
|
||||
0x01 0x018 6 26336231424 --- Logical Sectors Written
|
||||
0x01 0x020 6 910894807 --- Number of Write Commands
|
||||
0x01 0x028 6 17235968 --- Logical Sectors Read
|
||||
0x01 0x030 6 1024049 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 4 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 11454 --- Power-on Hours
|
||||
0x01 0x018 6 26336231424 --- Logical Sectors Written
|
||||
0x01 0x020 6 910894807 --- Number of Write Commands
|
||||
0x01 0x028 6 17235968 --- Logical Sectors Read
|
||||
0x01 0x030 6 1024049 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 4 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 11454 --- Power-on Hours
|
||||
0x01 0x018 6 26336231424 --- Logical Sectors Written
|
||||
0x01 0x020 6 910894807 --- Number of Write Commands
|
||||
0x01 0x028 6 17235968 --- Logical Sectors Read
|
||||
0x01 0x030 6 1024049 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 4 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 11454 --- Power-on Hours
|
||||
0x01 0x018 6 26336231424 --- Logical Sectors Written
|
||||
0x01 0x020 6 910894807 --- Number of Write Commands
|
||||
0x01 0x028 6 17235968 --- Logical Sectors Read
|
||||
0x01 0x030 6 1024049 --- Number of Read Commands
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0009 4 24 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 67 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
|
209
SSD/BAITITON/BT58/BT58SSD10M/21D72CA5BA3A
Normal file
209
SSD/BAITITON/BT58/BT58SSD10M/21D72CA5BA3A
Normal file
@@ -0,0 +1,209 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: BT58SSD10M
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 0 000000 ...
|
||||
Firmware Version: HPS2272P
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Apr 22 10:40:41 2023 UTC
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5d) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 4) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 234
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 11
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 36
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 215
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 16786753
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 1
|
||||
194 Temperature_Celsius -O--CK 100 100 050 - 40
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written -O--CK 100 100 050 - 6332
|
||||
242 Total_LBAs_Read -O--CK 100 100 050 - 199
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 7096
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 16 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 11 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 234 --- Power-on Hours
|
||||
0x01 0x018 6 414973952 --- Logical Sectors Written
|
||||
0x01 0x020 6 8712706 --- Number of Write Commands
|
||||
0x01 0x028 6 13041664 --- Logical Sectors Read
|
||||
0x01 0x030 6 364524 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 11 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 234 --- Power-on Hours
|
||||
0x01 0x018 6 414973952 --- Logical Sectors Written
|
||||
0x01 0x020 6 8712706 --- Number of Write Commands
|
||||
0x01 0x028 6 13041664 --- Logical Sectors Read
|
||||
0x01 0x030 6 364524 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 11 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 234 --- Power-on Hours
|
||||
0x01 0x018 6 414973952 --- Logical Sectors Written
|
||||
0x01 0x020 6 8712706 --- Number of Write Commands
|
||||
0x01 0x028 6 13041664 --- Logical Sectors Read
|
||||
0x01 0x030 6 364524 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 11 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 234 --- Power-on Hours
|
||||
0x01 0x018 6 414973952 --- Logical Sectors Written
|
||||
0x01 0x020 6 8712706 --- Number of Write Commands
|
||||
0x01 0x028 6 13041664 --- Logical Sectors Read
|
||||
0x01 0x030 6 364524 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 11 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 234 --- Power-on Hours
|
||||
0x01 0x018 6 414973952 --- Logical Sectors Written
|
||||
0x01 0x020 6 8712706 --- Number of Write Commands
|
||||
0x01 0x028 6 13041664 --- Logical Sectors Read
|
||||
0x01 0x030 6 364524 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 11 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 234 --- Power-on Hours
|
||||
0x01 0x018 6 414973952 --- Logical Sectors Written
|
||||
0x01 0x020 6 8712706 --- Number of Write Commands
|
||||
0x01 0x028 6 13041664 --- Logical Sectors Read
|
||||
0x01 0x030 6 364524 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 11 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 234 --- Power-on Hours
|
||||
0x01 0x018 6 414973952 --- Logical Sectors Written
|
||||
0x01 0x020 6 8712706 --- Number of Write Commands
|
||||
0x01 0x028 6 13041664 --- Logical Sectors Read
|
||||
0x01 0x030 6 364524 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 11 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 234 --- Power-on Hours
|
||||
0x01 0x018 6 414973952 --- Logical Sectors Written
|
||||
0x01 0x020 6 8712706 --- Number of Write Commands
|
||||
0x01 0x028 6 13041664 --- Logical Sectors Read
|
||||
0x01 0x030 6 364524 --- Number of Read Commands
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0009 4 26 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 77 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
|
209
SSD/BAITITON/BT58/BT58SSD10M/34C85FA256D2
Normal file
209
SSD/BAITITON/BT58/BT58SSD10M/34C85FA256D2
Normal file
@@ -0,0 +1,209 @@
|
||||
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
|
||||
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
||||
|
||||
=== START OF INFORMATION SECTION ===
|
||||
Device Model: BT58SSD10M
|
||||
Serial Number: --
|
||||
LU WWN Device Id: 0 000000 ...
|
||||
Firmware Version: HPS2272P
|
||||
User Capacity: 256,060,514,304 bytes [256 GB]
|
||||
Sector Size: 512 bytes logical/physical
|
||||
Rotation Rate: Solid State Device
|
||||
Form Factor: 2.5 inches
|
||||
TRIM Command: Available
|
||||
Device is: Not in smartctl database 7.3/5319
|
||||
ATA Version is: ACS-2 T13/2015-D revision 3
|
||||
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
||||
Local Time is: Sat Mar 18 17:33:22 2023 CET
|
||||
SMART support is: Available - device has SMART capability.
|
||||
SMART support is: Enabled
|
||||
AAM feature is: Unavailable
|
||||
APM feature is: Unavailable
|
||||
Rd look-ahead is: Enabled
|
||||
Write cache is: Enabled
|
||||
DSN feature is: Unavailable
|
||||
ATA Security is: Disabled, frozen [SEC2]
|
||||
Wt Cache Reorder: Unavailable
|
||||
|
||||
=== START OF READ SMART DATA SECTION ===
|
||||
SMART overall-health self-assessment test result: PASSED
|
||||
|
||||
General SMART Values:
|
||||
Offline data collection status: (0x00) Offline data collection activity
|
||||
was never started.
|
||||
Auto Offline Data Collection: Disabled.
|
||||
Self-test execution status: ( 0) The previous self-test routine completed
|
||||
without error or no self-test has ever
|
||||
been run.
|
||||
Total time to complete Offline
|
||||
data collection: ( 120) seconds.
|
||||
Offline data collection
|
||||
capabilities: (0x5d) SMART execute Offline immediate.
|
||||
No Auto Offline data collection support.
|
||||
Abort Offline collection upon new
|
||||
command.
|
||||
Offline surface scan supported.
|
||||
Self-test supported.
|
||||
No Conveyance Self-test supported.
|
||||
Selective Self-test supported.
|
||||
SMART capabilities: (0x0002) Does not save SMART data before
|
||||
entering power-saving mode.
|
||||
Supports SMART auto save timer.
|
||||
Error logging capability: (0x01) Error logging supported.
|
||||
General Purpose Logging supported.
|
||||
Short self-test routine
|
||||
recommended polling time: ( 2) minutes.
|
||||
Extended self-test routine
|
||||
recommended polling time: ( 4) minutes.
|
||||
|
||||
SMART Attributes Data Structure revision number: 1
|
||||
Vendor Specific SMART Attributes with Thresholds:
|
||||
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
||||
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
||||
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
||||
9 Power_On_Hours -O--CK 100 100 050 - 1
|
||||
12 Power_Cycle_Count -O--CK 100 100 050 - 8
|
||||
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
161 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
163 Unknown_Attribute -O--CK 100 100 050 - 40
|
||||
164 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
165 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
166 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
167 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
168 Unknown_Attribute -O--CK 100 100 050 - 0
|
||||
169 Unknown_Attribute -O--CK 100 100 050 - 100
|
||||
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0
|
||||
177 Wear_Leveling_Count -O--CK 100 100 050 - 16777216
|
||||
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
||||
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
||||
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
||||
192 Power-Off_Retract_Count -O--CK 100 100 050 - 8
|
||||
194 Temperature_Celsius -O--CK 100 100 050 - 40
|
||||
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
||||
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
||||
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
||||
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
||||
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
||||
232 Available_Reservd_Space -O--CK 100 100 050 - 100
|
||||
241 Total_LBAs_Written -O--CK 100 100 050 - 185
|
||||
242 Total_LBAs_Read -O--CK 100 100 050 - 13
|
||||
245 Unknown_Attribute -O--CK 100 100 050 - 197
|
||||
||||||_ K auto-keep
|
||||
|||||__ C event count
|
||||
||||___ R error rate
|
||||
|||____ S speed/performance
|
||||
||_____ O updated online
|
||||
|______ P prefailure warning
|
||||
|
||||
General Purpose Log Directory Version 1
|
||||
SMART Log Directory Version 1 [multi-sector log support]
|
||||
Address Access R/W Size Description
|
||||
0x00 GPL,SL R/O 1 Log Directory
|
||||
0x01 GPL,SL R/O 1 Summary SMART error log
|
||||
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
||||
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
||||
0x04 GPL,SL R/O 8 Device Statistics log
|
||||
0x06 GPL,SL R/O 1 SMART self-test log
|
||||
0x07 GPL,SL R/O 1 Extended self-test log
|
||||
0x09 GPL,SL R/W 1 Selective self-test log
|
||||
0x10 GPL,SL R/O 1 NCQ Command Error log
|
||||
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
||||
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
||||
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
||||
0xa0 GPL,SL VS 16 Device vendor specific log
|
||||
0xe0 GPL,SL R/W 1 SCT Command/Status
|
||||
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
||||
|
||||
SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
|
||||
No Errors Logged
|
||||
|
||||
SMART Extended Self-test Log Version: 0 (1 sectors)
|
||||
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
||||
|
||||
SMART Selective self-test log data structure revision number 0
|
||||
Note: revision number not 1 implies that no selective self-test has ever been run
|
||||
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
||||
1 0 0 Not_testing
|
||||
2 0 0 Not_testing
|
||||
3 0 0 Not_testing
|
||||
4 0 0 Not_testing
|
||||
5 0 0 Not_testing
|
||||
Selective self-test flags (0x0):
|
||||
After scanning selected spans, do NOT read-scan remainder of disk.
|
||||
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
||||
|
||||
SCT Commands not supported
|
||||
|
||||
Device Statistics (GP Log 0x04)
|
||||
Page Offset Size Value Flags Description
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 8 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1 --- Power-on Hours
|
||||
0x01 0x018 6 12124160 --- Logical Sectors Written
|
||||
0x01 0x020 6 227702 --- Number of Write Commands
|
||||
0x01 0x028 6 851968 --- Logical Sectors Read
|
||||
0x01 0x030 6 35158 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 8 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1 --- Power-on Hours
|
||||
0x01 0x018 6 12124160 --- Logical Sectors Written
|
||||
0x01 0x020 6 227702 --- Number of Write Commands
|
||||
0x01 0x028 6 851968 --- Logical Sectors Read
|
||||
0x01 0x030 6 35158 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 8 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1 --- Power-on Hours
|
||||
0x01 0x018 6 12124160 --- Logical Sectors Written
|
||||
0x01 0x020 6 227702 --- Number of Write Commands
|
||||
0x01 0x028 6 851968 --- Logical Sectors Read
|
||||
0x01 0x030 6 35158 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 8 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1 --- Power-on Hours
|
||||
0x01 0x018 6 12124160 --- Logical Sectors Written
|
||||
0x01 0x020 6 227702 --- Number of Write Commands
|
||||
0x01 0x028 6 851968 --- Logical Sectors Read
|
||||
0x01 0x030 6 35158 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 8 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1 --- Power-on Hours
|
||||
0x01 0x018 6 12124160 --- Logical Sectors Written
|
||||
0x01 0x020 6 227702 --- Number of Write Commands
|
||||
0x01 0x028 6 851968 --- Logical Sectors Read
|
||||
0x01 0x030 6 35158 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 8 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1 --- Power-on Hours
|
||||
0x01 0x018 6 12124160 --- Logical Sectors Written
|
||||
0x01 0x020 6 227702 --- Number of Write Commands
|
||||
0x01 0x028 6 851968 --- Logical Sectors Read
|
||||
0x01 0x030 6 35158 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 8 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1 --- Power-on Hours
|
||||
0x01 0x018 6 12124160 --- Logical Sectors Written
|
||||
0x01 0x020 6 227702 --- Number of Write Commands
|
||||
0x01 0x028 6 851968 --- Logical Sectors Read
|
||||
0x01 0x030 6 35158 --- Number of Read Commands
|
||||
0x01 ===== = = === == General Statistics (rev 1) ==
|
||||
0x01 0x008 4 8 --- Lifetime Power-On Resets
|
||||
0x01 0x010 4 1 --- Power-on Hours
|
||||
0x01 0x018 6 12124160 --- Logical Sectors Written
|
||||
0x01 0x020 6 227702 --- Number of Write Commands
|
||||
0x01 0x028 6 851968 --- Logical Sectors Read
|
||||
0x01 0x030 6 35158 --- Number of Read Commands
|
||||
|||_ C monitored condition met
|
||||
||__ D supports DSN
|
||||
|___ N normalized value
|
||||
|
||||
Pending Defects log (GP Log 0x0c) not supported
|
||||
|
||||
SATA Phy Event Counters (GP Log 0x11)
|
||||
ID Size Value Description
|
||||
0x0001 4 0 Command failed due to ICRC error
|
||||
0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy
|
||||
0x000a 4 10 Device-to-host register FISes sent due to a COMRESET
|
||||
0x000b 4 0 CRC errors within host-to-device FIS
|
||||
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
||||
|
Reference in New Issue
Block a user