80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity

Update of reports (new: 1329, modified: 0)

Browse Source
This commit is contained in:
Andrey Ponomarenko
2023-05-01 22:53:35 +03:00
parent 52e1a865b7
commit 6760e6c317
1329 changed files with 215727 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

315
SSD/KingSpec/T/T-64/1AD28A3ADC32 Normal file
View File

@@ -0,0 +1,315 @@
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: T-64
Serial Number: --
LU WWN Device Id: 5 000000 ...
Firmware Version: T170810a
User Capacity: 64,023,257,088 bytes [64.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Apr 11 22:58:32 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 33) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 66) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
9 Power_On_Hours -O--CK 100 100 000 - 44206
12 Power_Cycle_Count -O--CK 100 100 000 - 125
167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--CK 100 100 000 - 0
169 Unknown_Attribute -O--CK 100 100 010 - 0
171 Unknown_Attribute -O--CK 000 000 000 - 0
172 Unknown_Attribute -O--CK 000 000 000 - 0
173 Unknown_Attribute -O--CK 200 200 000 - 897692140062
175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 70
187 Reported_Uncorrect -O--CK 100 000 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 86
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 209
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 671
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 542
231 Unknown_SSD_Attribute PO---K 082 082 005 - 18
241 Total_LBAs_Written -O--CK 100 100 000 - 20973410904
242 Total_LBAs_Read -O--CK 100 100 000 - 29604739854
245 Unknown_Attribute -O--CK 100 100 000 - 1028135807
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 27
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 27 [26] occurred at disk power-on lifetime: 36852 hours (1535 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:02:31.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:02:21.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:02:17.800 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:02:07.500 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:57.500 IDENTIFY DEVICE
Error 26 [25] occurred at disk power-on lifetime: 36852 hours (1535 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:02:31.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:02:21.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:02:17.800 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:02:07.500 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:57.500 IDENTIFY DEVICE
Error 25 [24] occurred at disk power-on lifetime: 36852 hours (1535 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:02:07.500 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:57.500 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:54.300 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:44.100 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:34.100 IDENTIFY DEVICE
Error 24 [23] occurred at disk power-on lifetime: 36852 hours (1535 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:02:07.500 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:57.500 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:54.300 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:44.100 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:34.100 IDENTIFY DEVICE
Error 23 [22] occurred at disk power-on lifetime: 36852 hours (1535 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:44.100 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:34.100 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:30.800 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:23.900 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:13.900 IDENTIFY DEVICE
Error 22 [21] occurred at disk power-on lifetime: 36852 hours (1535 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:44.100 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:34.100 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:30.800 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:23.900 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:13.900 IDENTIFY DEVICE
Error 21 [20] occurred at disk power-on lifetime: 36852 hours (1535 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:23.900 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:13.900 IDENTIFY DEVICE
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:10.600 NOP [Abort queued commands]
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:00.400 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:50.400 IDENTIFY DEVICE
Error 20 [19] occurred at disk power-on lifetime: 36852 hours (1535 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 58 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:23.900 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:13.900 IDENTIFY DEVICE
00 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:10.600 NOP [Abort queued commands]
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:00.400 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:50.400 IDENTIFY DEVICE
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 40 Celsius
Power Cycle Min/Max Temperature: ?/40 Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -127/127 Celsius
Min/Max Temperature Limit: -127/127 Celsius
Temperature History Size (Index): 478 (394)
SCT Error Recovery Control:
Read: 80 (8.0 seconds)
Write: 80 (8.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 50 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC